PVC Drainage Pipe & Fittings

2.1PVC DRAINAGE

PIPE & fittings

2.1 PV

C D

RA

INA

GE

P

IPE

& FIT

TIN

GS

2.1 PVC DRAINAGE PIPE & FITTINGS

NO

VAD

RA

IN

(b) SUPERTUFF EXTRA IMPACT MODIFIED PVC PLAIN WALL PIPEProduct code: 155oSt Series

deScriPtion: SuPertuFF eXtrA is a solid wall pipe utilising impact modified PVc material, which gives superior impact strength qualities over conventional uPVc material.

Jointing: rubber ring joints are available in: dn150.

Product dimenSionS: tAble 6(b): SuPertuFF eXtrA imPAct modiFied PVc PlAin WAll PiPe dimenSionS

*refer to AS / nZS 1260:1999 for exact dimensions and tolerances.

NOVADRAIN & SUPERTUFF EXTRA DRAIN WASTE AND VENT PIPES FOR SEWER AND DRAIN

(non-PreSSure APPlicAtionS onlY)

comPliAnce: manufactured in accordance with AS / nZS 1260:1999 ‘PVc Pipes and Fittings for drain, Waste and Vent Applications’ (note: dWV pipes and fittings are coloured grey as specified in AS / nZS 1260:1999).

Sn stiffness class represents values in n/m/m e.g. Sn 6 pipe has a stiffness of 6000 n/m/m.

APPlicAtionS: may be used for:

• Above ground waste and vent applications• Domestic house drains• Urban gravity sewer mains• Industrial gravity discharge lines• Thrusted gravity sewer main applications

Nominal Size DN

Mean Outside Diameter* (mm)

Effective Length (m)

Class SN 16

150 160.2 6 ✓

PRODUCT DATA

(A) NOVADRAIN PLAIN WALL UPVC PIPEProduct code: 100 Series

deScriPtion: noVAdrAin is a solid wall pipe manufactured from uPVc material.

Jointing: Solvent cement joints available in size dn100 Sn6 and dn150 Sn4. rubber ring joints are available in all sizes: dn100 – dn475 inclusive.

Product dimenSionS: tAble 6(A): noVAdrAin PlAin WAll PiPe

Nominal Size DN

Mean Outside Diameter*

Length Effective Length

Stiffness Classes

SN 4 SN 6 SN 8 SN 10 SN 16

100 110.2 6 - - 150 160.3 6 - - 175 200.3 6 - - - 225 250.4 6 - - - 300 315.4 6 - - - 375 400.5 6 - - - 475 500.5 6 - - - -

✓

✓✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

*refer to AS / nZS 1260:1999 for exact dimensions and tolerances.


length: 6 metre effective length. the overall length of each pipe is 6 metres plus the witness mark length.

rubber ring Joint: SolVent cement Joint: effective length effective length overall length overall length

FittingS: dWV Fittings (uPVc) • Solvent Weld Joint (Coded ‘100’ Series) Injection Moulded fittings DN32 – DN150* • Rubber Ring Joint (Coded ‘1500’ Series) Injection Moulded fittings DN100 – DN150* • Large Diameter Fabricated Sewer Fittings DN175 – DN375 * Suitable for all stiffness classes, Sn4 – Sn16.

inStAllAtion PrActice: drain, Waste & Vent pipe systems should be installed in accordance with the following installation Standards / manuals: • AS 2032:1977 ‘Installation of uPVC Pipe System’ • AS / NZS 2566 ‘Design and Installation of Flexible Buried Pipelines’ • Written recommendations from Mico Pipelines or MasterTrade

limitAtionS: PVc drain, Waste & Vent should not be used:

• With aromatic and chlorinated hydrocarbons, ketones, esters and ethers

• For pumped pressure applications• At continuous service temperatures

above 60ºc or for intermittent discharges of liquid above 75ºc

• Without adequate support to the pipe both in above ground and below ground applications

• Without adequate thrust support• In below ground applications where

depth of cover is less than:- 300mm where pipeline is not subject to

vehicular loading

- 450mm where pipeline is subject to vehicular loading not in roadways

- 600mm where pipeline is subject to vehicular loading in sealed roadways

- 750mm where pipeline is subject to vehicular loading in unsealed roadways

- 750mm where pipeline is subject to construction equipment loadings

• When exposed to direct sunlight above ground for long term applications, without protection. this protection may include pale coloured u.V. resistant systems or physical shading

effective lengthoverall length

effective lengthoverall length

NO

VAD

RA

IN


DU

CTIN

G P

IPE

Nominal Size (DN) (mm)

SUPERSTORM 700 Series PVC Stormwater Duct

STORMFLO 1700 Series PVC Stormwater Duct

NEXUS HI-WAY Nexus HD Series HDPE Road Drain

Mean O.D (mm)

Mean W.T (mm)

Mean O.D. (mm)

Mean W.T (mm)

Mean O.D (mm)

90 90.1 2.4 90.2 2.0 -100 110.2 3.0 110.2 2.4 110.2150 160.3 4.2 160.3 3.2 160.2175 200.3 5.3 - - 200.4225 250.4 6.5 - - -300 315.4 8.2 - - -375 400.5 10.3 - - -475 500.5 12.7 - - -

SUPERSTORM 700 Series PVC Stormwater Duct

STORMFLO 1700 Series Stormwater Duct

NEXUS HI-WAY Nexus HD Series HDPE Road Drain

Fittings to be used

700 Series PVc moulded stormwater fittings, solvent weld Fabricated stormwater fittings, solvent weld

700 Series PVc moulded stormwater fittings, solvent weld Fabricated stormwater fittings, solvent weld

noVAFlo/ neXuS fitting range

DUCTINg PIPE (STORMWATER, SUPERSTORM, STORMFLO, NEXUS HI-WAY, ROAD DRAINS, ROAD CULVERTS)

comPliAnce: (a) Superstorm uPVc duct to nZS 7649.

(b) Stormflo uPVc duct to AS 1254.

(c) nexus hi-Way heavy duty Subsoil drain to tnZF/2:2000.

APPlicAtionS & Product codeS:

PRODUCT DATA tAble 9: duct PiPe dimenSionS

Jointing: SuPerStorm and StormFlo PVc pipes are supplied socketed one end, suitable for solvent weld (dn90 – dn225) or rubber ring (dn150 – dn475) joints.

neXuS hi-WAY hdPe road drain pipes are supplied in lengths or in coils with a factory fitted coupling.

FittingS:

(a) PVc Superstorm duct (Product code – 700 Series) local Authority stormwater laterals and mains, culverts and flumes, fabrication of fittings and specials, decorative building columns, cool store under-floor ducts, rainwater down pipes.

(b) PVc Stormflo duct (Product code -1700 Series) local Authority stormwater laterals and mains, culverts and flumes, fabrication of fittings and specials, decorative building columns, cool store under-floor ducts, rainwater down pipes.

(c) neXuS hi-WAY heavy duty subsoil drain (Product code – neXuS hd Series) hdPe subsoil drains under roads, conforming to tnZF/2:2000, land fill leachate drains, heavy duty subsoil drains.


NOVADRAIN uPVC DWV PIPE SOE & PEorder code SiZe mm x length m100.32.6 Soe 520452 32 x 6100.40.6 Soe 520453 40 x 6100.50.6 Soe 520454 50 x 6100.65.6 Soe 520455 65 x 6100.80.4 Pe 520456 80 x 4100.80.6 Soe 520457 80 x 6

NOVADRAIN 4000 uPVC DWV PIPE SOE & Z JOINT SN4order code SiZe mm x length m100Sn4.150.6 Soe 503497 150 x 6Z100Sn4.150.4 503496 150 x 4Z100Sn4.150.6 503498 150 x 6Z100Sn4.175.6 503502 175 x 6Z100Sn4.225.6 503504 225 x 6Z100Sn4.300.6 503505 300 x 6Z100Sn4.375.6 503507 375 x 6Z100Sn4.475.6 503508 475 x 6

NOVADRAIN 6000 uPVC DWV PIPE SOE & RRJ SN6order code SiZe mm x length m100Sn6.100.6 Soe 503046 100 x 6100Sn6.100.6 rrJ 503048 100 x 6

NOVADRAIN 8000 uPVC DWV PIPE Z JOINT SN8order code SiZe mm x length mZ100Sn8.150.4 503520 150 x 4Z100Sn8.150.6 503522 150 x 6Z100Sn8.175.6 503523 175 x 6Z100Sn8.225.6 503524 225 x 6Z100Sn8.300.6 503525 300 x 6Z100Sn8.375.6 503526 375 x 6Z100Sn8.475.6 475 x 6

NOVADRAIN 10000 uPVC DWV PIPE RRJ SN10order code SiZe mm x length m 100Sn10.100.6 rrJ 503057 100 x 6

NOVADRAIN 16000 uPVC DWV PIPE RRJ & Z JOINT SN16order code SiZe mm x length m 100Sn16.100.6 rrJ 503051 100 x 6Z100Sn16.150.3 503513 150 x 3Z100Sn16.150.4 503515 150 x 4Z100Sn16.150.6 503516 150 x 6Z100Sn16.175.6 503509 175 x 6Z100Sn16.225.6 503510 225 x 6Z100Sn16.300.6 503511 300 x 6Z100Sn16.375.6 503530 375 x 6Z100Sn16.475.6 475 x 6

PVC Drain Waste and Vent Pipe non-PreSSure APPlicAtionS onlY AS/nZS 1260

SOLVENT CEMENT JOINT

RUbbER RINg JOINT

SOLVENT CEMENT & RUbbER RINg JOINT


RUbbER RINg JOINT

RUbbER RINg JOINT


PVC Drain Waste and Vent Pipe non-PreSSure APPlicAtionS onlY AS/nZS 1260

SUPERTUFF EXTRA IMPACT MODIFIED PVC PIPE Z JOINT SN16order code SiZe mm x length m Z1550StSn16.150.6 503528 150 x 6

NOVACOR 6000 uPVC PIPE SOE & RRJ SN6order code SiZe mm x length m200Sn6.100.6 Soe 503054 100 x 6200Sn6.100.6 rrJ 503055 100 x 6

uPVC RESTRAIN non-PreSSure APPlicAtionS onlY AS/nZS 1260 (For trenchless installation)

RESTRAIN 1600 uPVC THREADED JOINT DWV PIPE RRJ SN16order code SiZe mm x length m reStrAin100.6 100 x 6 reStrAin100.3 100 x 3 reStrAin150.6 150 x 6 reStrAin150.3 150 x 3 reStrAin225.6 225 x 6 reStrAin225.3 225 x 3

*Made to order

*NEW PRODUCTFor technical assistance and pricing assistance contact your local branch.

THREADED JOINT RRJ


RUbbER RINg JOINT


order code SiZe mm 101.32.15 520482 32 x 15° 101.32.45 520481 32 x 45° 101.32.88 520479 32 x 88° 101.40.15 520488 40 x 15° 101.40.45 520487 40 x 45° 101.40.60 520486 40 x 60° 101.40.88 520483 40 x 88° 101.50.15 520494 50 x 15° 101.50.45 520493 50 x 45° 101.50.68 520491 50 x 68°101.50.88 520489 50 x 88° 101.65.15 520497 65 x 15° 101.65.45 520496 65 x 45°101.65.88 520495 65 x 88° 101.80.15 520501 80 x 15° 101.80.45 520400 80 x 45° 101.80.88 520498 80 x 88° 101.100.5 503077 100 x 5° 101.100.15 503073 100 x 15° 101.100.30 503069 100 x 30° 101.100.45 503067 100 x 45° 101.100.60 503064 100 x 60° 101.100.88 503061 100 x 88° 101.150.45 520504 150 x 45° 101.150.88 520503 150 x 88°

101.100A 503078 100 x 0-90°101.150A 520505 150 x 0-45°

171.50.42 520717 50 x 42° 171.50.88 520714 50 x 88° 171.65.42 520718 65 x 42° 171.80.42 520721 80 x 42° 171.80.88 520719 80 x 88° 171.100.5 503122 100 x 5° 171.100.11 503075 100 x 11° 171.100.15 503121 100 x 15° 171.100.22 503071 100 x 22° 171.100.30 503120 100 x 30° 171.100.42 503119 100 x 42° 171.100.88 503118 100 x 88°

171.50.40.42 520521 50 x 40 x 42° *Spigot is 50mm

101.32.88W 520506 32 x 88° 101.40.45W 520508 40 x 45° 101.40.88W 520507 40 x 88° 101.50.45W 520510 50 x 45° 101.50.88W 520509 50 x 88° 101.65.88W 520511 65 x 87° 101.80.88W 520513 80 x 88° 101.100.45W 520517 100 x 45° 101.100.88W 520516 100 x 88° 101.150.88W 520518 150 x 88°

NOVADRAIN uPVC Drain Waste and Vent Fittings SCJ non-PreSSure

102.100.88 503081 100 x 88°

PLAIN bEND

PLAIN bEND M & F

ADJUSTAbLE bEND

REAR ACCESS bEND

INSPECTION bEND

REDUCINg bEND M & F


order code SiZe mm 103.100.45 503085 100 x 45° 103.100.88 503083 100 x 88°

104.32.45 520523 32 x 45° 104.32.88 520524 32 x 88° 104.40.45 520525 40 x 45° 104.40.88 520524 40 x 88° 104.50.45 520527 50 x 45° 104.50.88 520526 50 x 88° 104.65.45 520529 65 x 45° 104.65.88 520528 65 x 88° 104.80.45 520532 80 x 45° 104.80.88 520530 80 x 88° 104.100.45* 503090 100 x 45° 104.100.88** 503088 100 x 88° 104.150.45 520544 150 x 45° 104.150.88 520543 150 x 88° *threaded on one main way socket and branch socket **threaded on one main way socket

104.80.50.45 520534 80 x 50 x 45° 104.100.50.45 520537 100 x 50 x 45° 104.100.50.88 520536 100 x 50 x 88° 104.100.65.45 520539 100 x 65 x 45° 104.100.80.45 520540 100 x 80 x 45° 104.150.100.45 520542 150 x 100 x 45° 104.150.100.88 520541 150 x 100 x 88°

104.40.88W 520545 40 x 88° 104.50.88W 520546 50 x 88° 104.65.88W 520547 65 x 88° 104.80.88W 520548 80 x 88° 104.100.88W 520549 100 x 88° 104.100.50.45W* 520551 100 x 50 x 45° 104.100.65.45W* 520552 100 x 65 x 45° *reducing Junction

105.80.88 520553 80 x 88° 105.100.88 520555 100 x 88°

105.100.45lh 503094 100 x 45° 105.100.45rh 503092 100 x 45°

106.100.88 520558 100 x 88°

110.32 520565 32 110.40 520566 40 110.50 520567 50 110.65 520568 65 110.80 520569 80 110.100 503097 100 110.150 503070 150

111.40 520572 40 111.50 520573 50 111.65 520574 65111.80 520575 80 111.100 520576 100 111.150 520577 150


PLAIN JUNCTION

INSPECTION JUNCTION

REAR ACCESS JUNCTION

DOUbLE JUNCTION

REDUCINg JUNCTION

EXPANSION COUPLINg

ACCESS bEND

SIDE ACCESS JUNCTION

STRAIgHT COUPLINg


order code SiZe mm 112.32 520578 32 112.40 520579 40 112.50 520580 50 112.65 520581 65

113.32 520582 32113.40 520583 40113.50 520585 50113.100 520586 100113.40.32 40 x 32

114.32 520587 32114.40 520588 40114.50 520589 50114.80 520590 80114.100 520591 100

119.80.50 520593 80 x 50119.100.50 520594 100 x 50

120.80 520596 80120.100 520735 100

122.100.50 551721 100 x 50

123.40.32 520602 40 x 32123.50.32 520603 50 x 32123.50.40 520604 50 x 40123.65.40 520605 65 x 40123.65.50 520606 65 x 50123.80.50 520607 80 x 50123.80.65 520608 80 x 65123.100.50 520609 100 x 50123.100.65 520610 100 x 65123.100.80 520611 100 x 80123.150.100 520612 150 x 100

124.40.32 520614 40 x 32124.50.32 520615 50 x 32124.50.40 520616 50 x 40124.65.40 520617 65 x 40124.65.50 520618 65 x 50124.80.50 520619 80 x 50124.80.65 520620 80 x 65124.100.40 520621 100 x 40124.100.50 520622 100 x 50124.100.65 520623 100 x 65124.100.80 520624 100 x 80124.150.100 520625 150 x 100124.Ac.100* 503104 140 x 100124.Ac.150* 526322 192 x 150* ceramic to PVc Adaptor


MALE IRON TO PVC (SOCKET)

COPPER TO PVC ADAPTOR

FEMALE IRON TO PVC (SOCKET)

STRAP ON bOSS

PIPE REDUCER

LEVEL INVERT TAPER

SOCKET REDUCER

bOLTED TRAP SCREW



order code SiZe mm 125.65 520626 65 125.80 520627 80 125.100 520628 100

127.80* 520634 80 127.100** 520636 100 127.100A* 520638 100 127.100r*** 520639 100 *offset ** concentric *** rubber Seal ring only

128.80 520640 80 128.100 591442 100

129.80* 520643 80 129.100** 503107 100 *F&F **threaded on one main way socket

131.40 520646 40 131.50 520647 50 131.65 520648 65 131.80 520649 80 131.100 520650 100

136.32 520654 32 136.40 520655 40 136.50 520656 50 136.80 520657 80 136.100 503109 100 136.150 503593 150

136c.100 503110 100 136c.150 503594 150

137.40 520662 40 137.50 520663 50 137.65 520664 65 137.80 520665 80 137.100 530111 100 137.150 503595 150

150.40 520676 40 150.50.40 520677 50 x 40 150.65 520678 65 150.80 520679 80 150.100 520680 100 150.150 520681 150

159.80.50P 520683 80 x 50 159.80.65P 520684 80 x 65159.80.80P* 520685 80 x 80 159.100.50 526318 100 x 50159.100.65 520689 100 x 65*Plain floor waste gully (fixed) **use only in conjunction with iplex boss Junctions

FLOOR FLANgE

FLEXIbLE PAN COLLAR UNSUITAbLE FOR USE WITH P PANS

SAFE WASTE TRAY

WEATHER APRON

INSPECTION PIPE M&F

PUSH-ON CAPS

VENT COWL

SqUAT FLOOR WASTE gULLY**

ACCESS CAP

ACCESS CAPAND bASE


order code SiZe mm159.100 503115 100 *use only in conjunction with iplex boss Junctions

166.40.40 554240 40 x 40 166.50.40 520690 50 x 40

168.80 967197 80 White PVc

168.80Wh* 520693 80 168.80cP** 520694 80168.100Wh* 967213 100168.100cP** 520702 100*White PVc**chrome plated PVc

169.80* 520695 80 169.80cP** 967208 80 *White PVc**chrome plated brass grate

169.100 520705 100

172.100 520726 100

172g.100 520728 100 grate onlyuse in conjunction with 172.100 Finishing collar

172P.100 520727 100 use in conjunction with 172.100 Finishing collar

174.80.50.40.88 520707 80x(2x50)x(2x40)x88° 174.100.50.40.88 520709 100x(3x50)x(1x40)x88° 174.100.80.50.40.88 520711 100x80x(2x50)x(2x40)x88°*use only in conjunction with iplex Squat Floor gully and Adjustable gully trap

104.100.50.40.88 520538 100x(3x50)x(1x40)x88°*use only in conjunction with iplex Squat Floor gully and Adjustable gully trap

ADJUSTAbLE gULLY TRAP*

CAP AND LININg

SCREW DOWN VINYL FLOOR SPIgOT bASE

FLOOR gRATE

SPIgOT bASE FLOOR gRATE

SOCKET FLOOR gRATE

POP-UP INSPECTION COVER

bOSS JUNCTIONM & F*


FINISHINg COLLAR

POP-OUT gRATE

SPIgOT bASE FLOOR gRATE


SMARTSEAL

SMARTRAP

SMARTILE

DOUbLE bOSS JUNCTION M & F*

SIDE SLOPE SqUASH TOP (INLET ONLY)

bOSS JUNCTION F & F*

LEVEL INLET SqUASH TOP (INLET ONLY)

VERMIN STOPPER


SMART PRODUCTS

order code SiZe mm

174.80.50.40.45d 520708 80x(1x50)x(3x40)x45*use only in conjunction with iplex Squat Floor gully and Adjustable gully trap

176.100 520722 100

177.100 503102 100

183.50 520729 50

9145.80 520763 809145.100 520764 1009145.150 520765 150compatible with nZS or bS copper tube

order code SiZe mm

d101SPAn 520738 100

d101SSeAl 526320

d101SWASte 520739 100d101SWASte.b 5336743

d101StrAP 5245882 100 x 50

d101Stile.2* 520740*Stainless steel

COPPER TO PVC SEAL RINg

SMARTPAN

SMARTWASTE


order code SiZe mm 140.32 520766 32 140.40 520767 40 140.50 520768 50 140.65 520772 65

140h.80 520670 80 140h.100 520673 100 140h.150 520674 150

141.32 520666 32 141.40 520667 40 141.50 520668 50 141.80 520773 80 141.100 520774 100

142.40 520776 40 142.50 520777 50 142.80 520778 80 142.100 520779 100

143.32 520780 32 143.40 520781 40 143.50 520782 50 143.80 520783 80 143.100 520784 100 143.150 520785 150

841c.15 590295 15 841c.20 590297 20

841P.15 590298 15 841P.20 590299 20

order code SiZe mm 160.40.32P 511363 40 x 32

161.40.32S 511364 40 x 45

162.40.32dW 511366 40 x 32 With dishwasher connection

AdAPtA Kit 40 x 32 For use with 160 & 161 uni-traps

UNI-TRAP Waste Traps

PLAIN P TRAP

PLAIN S TRAP

COMbINATION S & P (INCLUDES ADAPTA KIT)

DWV STAND OFF KEY CLIP

DWV PIPE CLIP

DWV HOLDERbAT (ALUMINIUM)

DWV STANDARD KEY CLIP

DWV SIDEHANgER KEY CLIP

COPPER PIPE CLIPIT COMPLETE WITH NAIL

POLYbUTYLENE CLIPIT COMPLETE WITH NAIL

PIPE CLIPS


order code SiZe mm 1501.100.45 503066 100 x 45° 1501.100.60 503067 100 x 60°1501.100.88 503068 100 x 88° 1501.150.45 503534 150 x 45° 1501.150.88 503532 150 x 88° 1501.150A* 503536 150 x 0-45° *Adjustable

1571.100.5 503076 100 x 5° 1571.100.11 503074 100 x 11° 1571.100.15 503072 100 x 15° 1571.100.22 503070 100 x 22° 1571.100.30 503068 100 x 30° 1571.150.15 554853 150 x 15° 1571.150A* 503601 150 x 0-45° *Adjustable

1502.100.88 503080 100 x 88°

1503.100.45 503084 100 x 45° 1503.100.88 503082 100 x 88°

1504.100.45 503089 100 x 45° 1504.100.88 503087 100 x 88° 1504.150.45 503545 150 x 45° 1574.150.45* 503550 150 x 45° 1574.150.88* 503547 150 x 88° *m&F

1504.150.100.45 525179 150 x 100 x 45° 1574.150.100.45* 503550 150 x 100 x 45° 1574.150.100.88* 561273 150 x 100 x 88°

*m&F

1505.100.45lh 503093 100 x 45° 1505.100.45rh 503091 100 x 45°

1511S.80 503095 80 1511S.150 503579 150

1511.100 503096 100

1511.150 503578 150

NOVADRAIN uPVC Drain Waste and Vent Fittings RRJ non-PreSSure

PLAIN bEND F & F

ACCESS bEND

PLAIN JUNCTION

PLAIN bEND M & F

REDUCINg JUNCTION

RAMP bEND

ACCESS JUNCTION

LOOSE COUPLINg

COMbINATION LOOSE/ SLIP COUPLINg

SLIP COUPLINg


order code SiZe mm 1511r.100 503098 100

1514.100.88 503099 100 x 88°

1516.100 503100 100

1523.100.80 503101 100 x 80 1523.150.100 503584 150 x 100

1527.100.150 503591 100 x 150

1524.100 503103 100 1524.150 503589 150

1524.114.100 503640 100 x 114

1525.100 503105 100 1525.150 503590 150

1529.100 503106 100 1529.150 503592 150

1559.100 503113 100

1575.100 503123 100 1575l.100* 503124 100 *lid only

PVC TO CERAMIC ADAPTER

REPAIR COUPLINg

FRESH AIR INLET

LEVEL INVERT TAPER

SEPTIC TANK JUNCTION

REVERSE LEVEL INVERT TAPER

CERAMIC SOCKET TO PVC ADAPTER

INSPECTION PIPE M&F

gULLEY TRAP

PVC PRESSURE TO HOUSE DRAIN ADAPTER DN100

gULLEY DISH



order code SiZe mm 1575.100eXt 100 grate included

1575.100r 503125 100 1575.200r 503603 200 1575.300r 503602 300

1580.100 561299 100 1580.150 561300 150

1588.100 506326 100


EXTENDEDgULLEY DISH

gULLEY DISH RISER

MANHOLE CONNECTOR

REFLUX VALVE


SUPERSTORM 4000 UPVC STORMWATER DUCT SOE & Z JOINT SN4

order code SiZe mm x length m 700Sn4.90.3 Soe 503220 90 x 3 700Sn4.90.6 Soe 503219 90 x 6 700Sn4.100.6 Soe 503221 100 x 6 700Sn4.150.6 Soe 503693 150 x 6 700Sn4.175.6 Soe 503694 175 x 6 700Sn4.225.6 Soe 503695 225 x 6

Z700Sn4.150.6 503698 150 x 6 Z700Sn4.175.6 503699 175 x 6 Z700Sn4.225.6 503700 225 x 6 Z700Sn4.300.6 503701 300 x 6 Z700Sn4.375.6 503702 375 x 6 Z700Sn4.475.6 503703 475 x 6

uPVC STORMWATER DUCT non PreSSure APPlicAtionS onlY - AS/nZS 1254

SOLVENT CEMENT JOINT

RUbbER RINg JOINT


order code SiZe mm7701.90.15 503232 90 x 15°701.90.22 503231 90 x 22°701.90.45 503230 90 x 45°701.90.88 503229 90 x 88°101.100.5 503077 100 x 5°101.100.15 503073 100 x 15° 101.100.30 503069 100 x 30° 101.100.45 503067 100 x 45° 101.100.88 503061 100 x 88°701.150.45 503647 150 x 45°701.150.90 503648 150 x 90°

771.90.45m&F 503247 90 x 45°

103.100.45 503085 100 x 45°103.100.88 503083 100 x 88°

704.90.45** 503234 90 x 45°704.90.88* 503233 90 x 88°104.100.45*** 503258 100 x 45°104.100.88** 503259 100 x 88°704.150.45** 503654 150 x 45°704.150.90*** 503653 150 x 90°*threaded on branch socket**threaded on one main way socket***threaded on one main way socket and branch socket

704.150.100.45 503667 150 x 100 x 45°

105.100.45lh 503094 100 x 45°105.100.45rh 503092 100 x 45°

710.90 503235 90 110.100 503097 100 110.150 520570 150

711r.90 503237 90

724.90.100 503238 90 x 100

STORMFIT uPVC STORMWATER FITTINgS non PreSSure APPlicAtionS onlY

PLAIN bEND M&F

INSPECTION JUNCTION

STRAIgHT COUPLINg

PLAIN JUNCTION

ACCESS bEND

REDUCINg JUNCTION

ADAPTOR

REPAIR COUPLINg

PLAIN bEND F&F


order code SiZe mm 129.100 * 503107 100*threaded on one main way socket

736.90 (gasket sold separately) 503240 90136.100 503109 100736c.90 * 503241 90136c.100* 503110 100736g.90** 503143 90*cap only**gasket

737.90 503242 90 137.100 503111 100 137.150 503595 150

765.90 503245 90 765.100 503116 100

769.90 503246 90 769.150.100 503631 150 x 100

STORMFIT uPVC STORMWATER FITTINgS non PreSSure APPlicAtionS onlY

SCREW CAP AND bASE

PUSH ON CAP

STORMWATER gRATE

KERb OUTLET

INSPECTION PIPE M & F

PVC Drainage Pipe & Fittings

Documents

Transcript of PVC Drainage Pipe & Fittings