PVC Data cables - igus.eu...122 EU04.2019 EU04.2019 123 CF240 PVC 10 x d Data cable | PVC |...
Transcript of PVC Data cables - igus.eu...122 EU04.2019 EU04.2019 123 CF240 PVC 10 x d Data cable | PVC |...
117116 EU04
.201
9
Guarantee
month guarantee
36 month chainflex® guaranteeGuaranteed lifetime for predictable reliabilitySelection table page 118
With the help of the chainflex® service life calculator, you can quickly and easily calculatethe expected service life of chainflex® cables specifically for your application:
www.igus.eu/chainflexlifeDat
a ca
bles
Coa
x ca
bles
chai
nflex
®
cabl
e
Jack
et
Shi
eld
Min
imum
ben
d
radi
us. e
-cha
in®
[fact
or x
d]
Tem
pera
ture
. e-
chai
n®
from
/to
[°C
]
App
rova
ls a
nd
stan
dard
s
Oil-
resi
stan
t
Tors
ion
resi
stan
t
v m
ax. [
m/s
]. un
supp
orte
d
v m
ax. [
m/s
] gl
idin
g
a m
ax. [
m/s
2 ]
Pag
e
Data cables – Wound in layers
CF8821 PVC 12.5 +5/+70 3 20 120
CF240 PVC 10 +5/+70 3 2 20 122
CF240.PUR PUR 10 -25/+80 3 2 20 126
Data cables – Twisted pair
CF211 PVC 7.5 +5/+70 5 3 50 130
CF211.PUR PUR 7.5 -25/+80 5 3 50 134
CF11 TPE 6.8 -35/+100 10 6 100 138
Data cables – Twisted pair with pair shield
CF112 PUR 10 -25/+80 10 5 80 142
CF12 TPE 10 -35/+100 10 6 100 146
Data cables – Wound in layers
CF298 TPE 4 -35/+90 10 6 100 148
CF299 TPE 4 -35/+90 10 6 100 150
Coax cables
CFKoax TPE 10-35/+100-35/+70 10 5 100 152
New
119118
chainflex® cable
Temperature, from/to [°C]
v max. [m/s] a max. [m/s2]
Travel distance [m]
Minimum bend radius [factor x d]
Minimum bend radius [factor x d]
Minimum bend radius [factor x d]
Page
unsupported gliding < 10 m ≥ 10 m < 10 m ≥ 10 m < 10 m ≥ 10 m
Data cables 5 million (1 million) double strokes *
7.5 million (3 million) double strokes *
10 million (5 million) double strokes *
CF8821+5 / +15
3 - 20 ≤ 10
15 - 16 - 17 -
120+15 / +60 12.5 - 13.5 - 14.5 -
+60 / +70 15 - 16 - 17 -
5 million (10 million) 7.5 million (15 million) 10 million (20 million)
CF240+5 / +15
3 2 20 ≤ 50
12.5 15 13.5 16 14.5 17
122+15 / +60 10 12.5 11 13.5 12 14.5
+60 / +70 12.5 15 13.5 16 14.5 17
CF240.PUR-25 / -15
3 2 20 ≤ 50
12.5 15 13.5 16 14.5 17
126-15 / +70 10 12.5 11 13.5 12 14.5
+70 / +80 12.5 15 13.5 16 14.5 17
CF211+5 / +15
5 3 50 ≤ 100
10 11 12
130+15 / +60 7.5 8.5 9.5
+60 / +70 10 11 12
CF211.PUR-25 / -15
5 3 50 ≤ 100
10 11 12
134-15 / +70 7.5 8.5 9.5
+70 / +80 10 11 12
CF11-35 / -25
10 6 100 ≤ 400
7.5 8.5 9.5
138-25 / +90 6.8 7.5 8.5
+90 / +100 7.5 8.5 9.5
CF112-20 / -15
10 5 80 ≤ 100
12.5 13.5 14.5
142-15 / +70 10 11 12
+70 / +80 12.5 13.5 14.5
CF12-35 / -25
10 6 100 ≤ 400
12.5 13.5 14.5
146-25 / +90 10 11 12
+90 / +100 12.5 13.5 14.5
CF298-35 / -25
10 6 100 ≤ 100
5 6 7
148-25 / +80 4 5 6
+80 / +90 5 6 7
CF299-35 / -25
10 6 100 ≤ 100
5 6 7
150-25 / +80 4 5 6
+80 / +90 5 6 7
Coax Cables
CFKoax1/3-35 / -25
10 5 100 ≤ 400
12.5 13.5 14.5
152-25 / +90 10 11 12
+90 / +100 12.5 13.5 14.5
CFKoax2-35 / -25
10 5 100 ≤ 400
12.5 13.5 14.5
152-25 / +60 10 11 12
+60 / +70 12.5 13.5 14.5
(1) Exclusive! Guaranteed lifetime for this series according to the guarantee conditions Page 22-23 * Higher number of double strokes? Online lifetime calculation www.igus.eu/chainflexlifeFigures in brackets refer to chainflex® series CF8821 and CF298/CF299
chainflex® guarantee Guaranteed lifetime (1)
121EU04
.201
9
EU04
.201
9
CF8821PVC
12.5 x d
z For flexing applications zPVC outer jacket z Shielded z Flame retardant
Data cable | PVC | chainflex® CF8821 E
xam
ple
imag
e
PVC iguPUR PUR TPE
EPLAN download, configurators www.igus.eu/CF8821
CF8821PVC
12.5 x dClass 3.1.1.1
Basic requirements low 1 2 3 4 5 6 7 highest
Travel distance unsupported 1 2 3 4 5 6 ≥ 400 m
Oil resistance none 1 2 3 4 highest
Torsion none 1 2 3 4 ±360°
Guaranteed service life (details see page 22-23)
Typical application areas
* Higher number of double strokes? Service life calculation online www.igus.eu/chainflexlife
1 million 3 million 5 million
Temperature,from/to [°C]
R min. [factor x d]
R min. [factor x d]
R min. [factor x d]
+5/+15 15 16 17
+15/+60 12.5 13.5 14.5
+60/+70 15 16 17
36 month guarantee ... 1,354 types from stock ... no cutting charges
z For flexing applications, Class 3 z Especially for unsupported travels, Class 1 z Without influence of oil, Class 1 z No torsion, Class 1 z Preferably indoor applications z Wood/stone processing, Packaging industry, supply systems, Handling, adjusting equipment
Double strokes*
Guarantee
month guarantee
5 millionDouble strokes guaranteed
12.5 x dBend radius, e-chain®
10 mTravel distance, e-chain®
Dynamic informationBend radius e-chain® linear minimum 12.5 x d
flexible minimum 10 x dfixed minimum 7 x d
Temperature e-chain® linear +5 °C up to +70 °Cflexible -5 °C up to +70 °C (following DIN EN 60811-504)fixed -15 °C up to +70 °C (following DIN EN 50305)
v max. unsupported 3 m/s
a max. 20 m/s²
Travel distance Unsupported travel distances up to 10 m, Class 1
Cable structureConductor Conductor consisting of bare copper wires (according to DIN EN 60228).
Core insulation Mechanically high-quality TPE mixture.
Core structure Cores wound with an optimised pitch length.
Core identification Colour code in accordance with DIN 47100.
Overall shield Braiding made of tinned copper wires.Coverage approx. 60 % optical
Outer jacket Low-adhesion PVC mixture, adapted to suit the requirements in e-chains®.Colour: Jet black (similar to RAL 9005)
Electrical informationNominal voltage 300/300 V (following DIN VDE 0298-3)
Testing voltage 1500 V (following DIN EN 50395)
Properties and approvalsFlame retardant According to IEC 60332-1-2, CEI 20-35, FT1, VW-1
Silicone-free Free from silicone which can affect paint adhesion (following PV 3.10.7 – status 1992)
UL/CSA Style 10493 and 2464, 300 V, 80 °C
NFPA Following NFPA 79-2018, chapter 12.9
Lead-free Following 2011/65/EC (RoHS-II)
CE Following 2014/35/EU
Part No.
Number of cores and conductor nominal cross section
Outer diameter (d) max.
Copper index
Weight
[mm²] [mm] [kg/km] [kg/km]CF8821.01.02 (2x0.14)C 5.0 11 31CF8821.01.03 (3x0.14)C 5.5 13 35CF8821.01.04 (4x0.14)C 5.5 15 41CF8821.01.05 (5x0.14)C 6.0 18 46CF8821.01.07 (7x0.14)C 6.5 23 57CF8821.02.02 (2x0.25)C 5.5 13 34CF8821.02.03 (3x0.25)C 5.5 16 40CF8821.02.04 (4x0.25)C 6.0 20 46CF8821.02.05 (5x0.25)C 6.0 23 53CF8821.02.07 (7x0.25)C 7.0 30 66
Note: The given outer diameters are maximum values and may tend toward lower tolerance limits. G = with green-yellow earth core x = without earth core
123122 EU04
.201
9
EU04
.201
9
CF240PVC
10 x d Data cable | PVC | chainflex® CF240
Dynamic informationBend radius e-chain® linear minimum 10 x d
flexible minimum 8 x dfixed minimum 5 x d
Temperature e-chain® linear +5 °C up to +70 °Cflexible -5 °C up to +70 °C (following DIN EN 60811-504)fixed -15 °C up to +70 °C (following DIN EN 50305)
v max. unsupported 3 m/sgliding 2 m/s
a max. 20 m/s²
Travel distance Unsupported travels and up to 50 m for gliding applications, Class 4
Cable structureConductor Very finely stranded special conductors of particularly bending resistant design
made of bare copper wires.Core insulation Mechanically high-quality TPE mixture.
Core structure The individual cores are wound in layers with a short pitch length.
Core identification Colour code in accordance with DIN 47100.
Intermediate layer Foil taping over the outer layer.
Overall shield Extremely bending-resistant braiding made of tinned copper wires.Coverage approx. 70 % linear, approx. 90 % optical
Outer jacket Low-adhesion, oil-resistant PVC mixture, adapted to suit the requirements in e-chains® (following DIN EN 50363-4-1).Colour: Silver-grey (similar to RAL 7001)
Electrical informationNominal voltage 300/300 V (following DIN VDE 0298-3)
Testing voltage 1500 V (following DIN EN 50395)
Exa
mpl
e im
age
PVC iguPUR PUR TPE
EPLAN download, configurators www.igus.eu/CF240
CF240PVC
10 x d
Properties and approvalsOil resistance Oil-resistant (following DIN EN 50363-4-1), Class 2
Flame retardant According to IEC 60332-1-2, CEI 20-35, FT1, VW-1
Silicone-free Free from silicone which can affect paint adhesion (following PV 3.10.7 – status 1992)
UL/CSA Style 10493 and 2464, 300 V, 80 °C
NFPA Following NFPA 79-2018, chapter 12.9
EAC Certificate No. RU C-DE.ME77.B.01254 (TR ZU)
CTP Certificate No. C-DE.PB49.B.00416 (Fire protection)
CEI Following CEI 20-35
Lead-free Following 2011/65/EC (RoHS-II)
Clean room According to ISO Class 1, material/cable tested by IPA according to DIN EN ISO standard 14644-1
CE Following 2014/35/EU
Class 4.4.2.1
Basic requirements low 1 2 3 4 5 6 7 highest
Travel distance unsupported 1 2 3 4 5 6 ≥ 400 m
Oil resistance none 1 2 3 4 highest
Torsion none 1 2 3 4 ±360°
36 month guarantee ... 1,354 types from stock ... no cutting charges
z For medium duty applications zPVC outer jacket z Shielded zOil-resistant
z Flame retardant
10 millionDouble strokes guaranteed
10 x dBend radius, e-chain®
50 mTravel distance, e-chain®
Typical application areas z For medium duty applications, Class 4 z Unsupported travel distances and up to 50 m for gliding applications, Class 4 z Light oil influence, Class 2 z Unsupported travel distances and up to 50 m for gliding applications, Class 4 z Preferably indoor applications, but also outdoor ones at temperatures > 5 °C z Storage and retrieval units for high-bay warehouses, machining units/packaging machines, Handling, indoor cranes
Guaranteed service life (details see page 22-23)
* Higher number of double strokes? Service life calculation online www.igus.eu/chainflexlife
5 million 7.5 million 10 million
Temperature,from/to [°C]
< 10 m ≥ 10 m < 10 m ≥ 10 m < 10 m ≥ 10 m
R min. [factor x d]
R min. [factor x d]
R min. [factor x d]
R min. [factor x d]
R min. [factor x d]
R min. [factor x d]
-25/-15 12.5 15 13.5 16 14.5 17
-15/+70 10 12.5 11 13.5 12 14.5
+70/+80 12.5 15 13.5 16 14.5 17
Double strokes*
Guarantee
month guarantee
125124 EU04
.201
9
EU04
.201
9
Example image
Data cable | PVC | chainflex® CF240
CF240PVC
10 x d
PVC iguPUR PUR TPE
EPLAN download, configurators www.igus.eu/CF240
CF240PVC
10 x d
Order example: CF240.01.03 – to your desired length (0.5 m steps)CF240 chainflex® series .01 Code nominal cross section .03 Number of cores
Online order www.chainflex.eu/CF240
Delivery time 24hrs or today.Delivery time means time until goods are shipped.
Class 4.4.2.1
Basic requirements low 1 2 3 4 5 6 7 highest
Travel distance unsupported 1 2 3 4 5 6 ≥ 400 m
Oil resistance none 1 2 3 4 highest
Torsion none 1 2 3 4 ±360°
36 month guarantee ... 1,354 types from stock ... no cutting charges
Part No.
Number of cores and conductor nominal cross section
Outer diameter (d) max.
Copper index
Weight
[mm²] [mm] [kg/km] [kg/km]CF240.01.03 (3x0.14)C 5.0 14 28CF240.01.04 (4x0.14)C 5.0 15 31CF240.01.05 (5x0.14)C 5.5 17 34CF240.01.07 (7x0.14)C 6.0 23 44CF240.01.14 (14x0.14)C 7.5 41 72CF240.01.18 (18x0.14)C 8.0 51 90CF240.01.24 (24x0.14)C 9.0 64 125CF240.02.03 (3x0.25)C 5.0 17 34CF240.02.04 (4x0.25)C 5.5 20 44CF240.02.05 (5x0.25)C 5.5 24 42CF240.02.07 (7x0.25)C 6.5 31 53CF240.02.08 (8x0.25)C 7.0 35 61CF240.02.14 (14x0.25)C 8.0 59 90CF240.02.18 (18x0.25)C 8.5 71 107CF240.02.24 (24x0.25)C 9.5 95 161CF240.03.02 (2x0.34)C 5.5 19 37CF240.03.03 (3x0.34)C 5.5 25 39CF240.03.04 (4x0.34)C 6.0 30 50CF240.03.05 (5x0.34)C 6.0 34 55CF240.03.07 (7x0.34)C 7.5 45 74CF240.03.10 (10x0.34)C 8.5 59 95CF240.03.14 (14x0.34)C 9.0 74 112CF240.03.18 (18x0.34)C 10.0 91 137CF240.03.24 (24x0.34)C 11.0 119 176
Note: The given outer diameters are maximum values and may tend toward lower tolerance limits. G = with green-yellow earth core x = without earth core
Guarantee
month guarantee
127126 EU04
.201
9
EU04
.201
9
CF240.PURPUR
10 x d Data cable | PUR | chainflex® CF240.PUR
Dynamic informationBend radius e-chain® linear minimum 10 x d
flexible minimum 8 x dfixed minimum 5 x d
Temperature e-chain® linear -25 °C up to +80 °Cflexible -40 °C up to +80 °C (following DIN EN 60811-504)fixed -50 °C up to +80 °C (following DIN EN 50305)
v max. unsupported 3 m/sgliding 2 m/s
a max. 20 m/s²
Travel distance Unsupported travels and up to 50 m for gliding applications, Class 4
Cable structureConductor Very finely stranded special conductors of particularly bending resistant design
made of bare copper wires.Core insulation Mechanically high-quality TPE mixture.
Core structure The individual cores are wound in layers with a short pitch length.
Core identification Colour code in accordance with DIN 47100.
Intermediate layer Foil taping over the outer layer.
Overall shield Extremely bending-resistant braiding made of tinned copper wires.Coverage approx. 70 % linear, approx. 90 % optical
Outer jacket Low-adhesion, halogen-free, highly abrasion resistant PUR mixture, adapted to suit the requirements in e-chains® (following DIN EN 50363-10-2).Colour: Window-grey (similar to RAL 7040)
Electrical informationNominal voltage 300/300 V (following DIN VDE 0298-3)
Testing voltage 1500 V (following DIN EN 50395)
Exa
mpl
e im
age
PVC iguPUR PUR TPE
EPLAN download, configurators www.igus.eu/CF240.PUR
CF240.PURPUR
10 x d
Properties and approvalsUV resistance Medium
Oil resistance Oil-resistant (following DIN EN 50363-10-2), Class 3
Offshore MUD-resistant following NEK 606 - status 2009
Flame retardant According to IEC 60332-1-2, CEI 20-35, FT1, VW-1
Silicone-free Free from silicone which can affect paint adhesion (following PV 3.10.7 – status 1992)
Halogen-free Following DIN EN 60754
UL/CSA Style 10493 and 20233, 300 V, 80 °C
NFPA Following NFPA 79-2018, chapter 12.9
DNV-GL Type approval certificate No. 61 936-14 HH
EAC Certificate No. RU C-DE.ME77.B.01254 (TR ZU)
CTP Certificate No. C-DE.PB49.B.00416 (Fire protection)
CEI Following CEI 20-35
Lead-free Following 2011/65/EC (RoHS-II)
Clean room According to ISO Class 1. The outer jacket material of this series complies with CF77.UL.05.12.D - tested by IPA according to standard DIN EN ISO 14644-1
CE Following 2014/35/EU
Class 4.4.3.1
Basic requirements low 1 2 3 4 5 6 7 highest
Travel distance unsupported 1 2 3 4 5 6 ≥ 400 m
Oil resistance none 1 2 3 4 highest
Torsion none 1 2 3 4 ±360°
Guaranteed service life (details see page 22-23)
* Higher number of double strokes? Service life calculation online www.igus.eu/chainflexlife
5 million 7.5 million 10 million
Temperature,from/to [°C]
< 10 m ≥ 10 m < 10 m ≥ 10 m < 10 m ≥ 10 m
R min. [factor x d]
R min. [factor x d]
R min. [factor x d]
R min. [factor x d]
R min. [factor x d]
R min. [factor x d]
-25/-15 12.5 15 13.5 16 14.5 17
-15/+70 10 12.5 11 13.5 12 14.5
+70/+80 12.5 15 13.5 16 14.5 17
Double strokes*
36 month guarantee ... 1,354 types from stock ... no cutting charges
z For medium duty applications zPUR outer jacket z Shielded zOil resistant and coolant-resistant
z Flame retardant zPVC and halogen-free zNotch-resistant zHydrolysis and microbe-resistant
10 millionDouble strokes guaranteed
10 x dBend radius, e-chain®
50 mTravel distance, e-chain®
Typical application areas z For medium duty applications, Class 4 z Unsupported travel distances and up to 50 m for gliding applications, Class 4 z Almost unlimited resistance to oil, Class 3 z No torsion, Class 1 z Indoor and outdoor applications with average sun radiation z Machining units/machine tools, Storage and retrieval units for high-bay warehouses, Packaging industry, quick handling, refrigerating sector
Guarantee
month guarantee
New
129128 EU04
.201
9
EU04
.201
9
Example image
Data cable | PUR | chainflex® CF240.PUR
CF240.PURPUR
10 x d
PVC iguPUR PUR TPE
EPLAN download, configurators www.igus.eu/CF240.PUR
CF240.PURPUR
10 x d
Order example: CF240.PUR.01.04 – to your desired length (0.5 m steps)CF240.PUR chainflex® series .01 Code nominal cross section .04 Number of cores
Online order www.chainflex.eu/CF240.PUR
Delivery time 24hrs or today.Delivery time means time until goods are shipped.
Class 4.4.3.1
Basic requirements low 1 2 3 4 5 6 7 highest
Travel distance unsupported 1 2 3 4 5 6 ≥ 400 m
Oil resistance none 1 2 3 4 highest
Torsion none 1 2 3 4 ±360°
36 month guarantee ... 1,354 types from stock ... no cutting charges
Part No.
Number of cores and conductor nominal cross section
Outer diameter (d) max.
Copper index
Weight
[mm²] [mm] [kg/km] [kg/km]CF240.PUR.01.04 (4x0.14)C 6.0 15 39CF240.PUR.01.07 (7x0.14)C 6.5 22 53CF240.PUR.01.08 (8x0.14)C 7.0 26 64CF240.PUR.01.14 (14x0.14)C 8.0 40 79CF240.PUR.01.18 (18x0.14)C 8.5 51 94CF240.PUR.01.25 (25x0.14)C 9.5 67 124CF240.PUR.02.03 (3x0.25)C 6.0 17 41CF240.PUR.02.04 (4x0.25)C 6.0 21 45CF240.PUR.02.05 (5x0.25)C 6.0 24 50CF240.PUR.02.07 (7x0.25)C 7.0 32 65CF240.PUR.02.08 (8x0.25)C 7.5 35 71CF240.PUR.02.14 (14x0.25)C 8.5 59 103CF240.PUR.02.18 (18x0.25)C 9.0 71 122CF240.PUR.02.25 (25x0.25)C 10.5 96 161CF240.PUR.03.03 (3x0.34)C 6.0 25 47CF240.PUR.03.04 (4x0.34)C 6.5 30 54CF240.PUR.03.05 (5x0.34)C 7.0 34 60CF240.PUR.03.07 (7x0.34)C 8.0 45 84CF240.PUR.03.14 (14x0.34)C 9.5 74 126CF240.PUR.03.18 (18x0.34)C 10.5 92 156
Note: The given outer diameters are maximum values and may tend toward lower tolerance limits. G = with green-yellow earth core x = without earth core
Guarantee
month guarantee
New
131130 EU04
.201
9
EU04
.201
9
CF211PVC
7.5 x d Data cable | PVC | chainflex® CF211
Dynamic informationBend radius e-chain® linear minimum 7.5 x d
flexible minimum 6 x dfixed minimum 4 x d
Temperature e-chain® linear +5 °C up to +70 °Cflexible -5 °C up to +70 °C (following DIN EN 60811-504)fixed -15 °C up to +70 °C (following DIN EN 50305)
v max. unsupported 5 m/sgliding 3 m/s
a max. 50 m/s²
Travel distance Unsupported travels and up to 100 m for gliding applications, Class 5
Cable structureConductor Very finely stranded special conductors of particularly bending resistant design
made of bare copper wires.Core insulation Mechanically high-quality TPE mixture.
Core structure Cores twisted in pairs with a short pitch length, core pairs then wound with short pitch lengths.
Core identification Colour code in accordance with DIN 47100.
Intermediate layer Foil taping over the outer layer.
Overall shield Extremely bending-resistant braiding made of tinned copper wires.Coverage approx. 70 % linear, approx. 90 % optical
Outer jacket Low-adhesion, oil-resistant PVC mixture, adapted to suit the requirements in e-chains® (following DIN EN 50363-4-1).Colour: Silver-grey (similar to RAL 7001)
Electrical informationNominal voltage 300/300 V (following DIN VDE 0298-3)
Testing voltage 1500 V (following DIN EN 50395)
Exa
mpl
e im
age
PVC iguPUR PUR TPE
EPLAN download, configurators www.igus.eu/CF211
CF211PVC
7.5 x d
Properties and approvalsOil resistance Oil-resistant (following DIN EN 50363-4-1), Class 2
Flame retardant According to IEC 60332-1-2, CEI 20-35, FT1, VW-1
Silicone-free Free from silicone which can affect paint adhesion (following PV 3.10.7 – status 1992)
UL/CSA Style 10493 and 2464, 300 V, 80 °C
NFPA Following NFPA 79-2018, chapter 12.9
EAC Certificate No. RU C-DE.ME77.B.01254 (TR ZU)
CTP Certificate No. C-DE.PB49.B.00416 (Fire protection)
CEI Following CEI 20-35
Lead-free Following 2011/65/EC (RoHS-II)
Clean room According to ISO Class 1. The outer jacket material of this series complies with CF240.02.24 - tested by IPA according to standard DIN EN ISO 14644-1
CE Following 2014/35/EU
Class 5.5.2.1
Basic requirements low 1 2 3 4 5 6 7 highest
Travel distance unsupported 1 2 3 4 5 6 ≥ 400 m
Oil resistance none 1 2 3 4 highest
Torsion none 1 2 3 4 ±360°
Guaranteed service life (details see page 22-23)
* Higher number of double strokes? Service life calculation online www.igus.eu/chainflexlife
5 million 7.5 million 10 million
Temperature,from/to [°C]
R min. [factor x d]
R min. [factor x d]
R min. [factor x d]
+5/+15 10 11 12
+15/+60 7.5 8.5 9.5
+60/+70 10 11 12
Double strokes*
36 month guarantee ... 1,354 types from stock ... no cutting charges
z For heavy duty applications zPVC outer jacket z Shielded z Twisted pair
zOil-resistant z Flame retardant
10 millionDouble strokes guaranteed
7.5 x dBend radius, e-chain®
100 mTravel distance, e-chain®
Typical application areas z For heavy duty applications, Class 5 z Unsupported travel distances and up to 100 m for gliding applications, Class 5 z Light oil influence, Class 2 z Storage and retrieval units for high-bay warehouses, machining units/packaging machines, Handling, indoor cranes
z Preferably indoor applications, but also outdoor ones at temperatures > 5 °C z No torsion, Class 1
Guarantee
month guarantee
133132 EU04
.201
9
EU04
.201
9
Example image
Data cable | PVC | chainflex® CF211
CF211PVC
7.5 x d
PVC iguPUR PUR TPE
EPLAN download, configurators www.igus.eu/CF211
CF211PVC
7.5 x d
Order example: CF211.02.01.02 – to your desired length (0.5 m steps)CF211 chainflex® series .02 Code nominal cross section .01 Number of pairs .02 Identification pairs
Online order www.chainflex.eu/CF211
Delivery time 24hrs or today.Delivery time means time until goods are shipped.
Class 5.5.2.1
Basic requirements low 1 2 3 4 5 6 7 highest
Travel distance unsupported 1 2 3 4 5 6 ≥ 400 m
Oil resistance none 1 2 3 4 highest
Torsion none 1 2 3 4 ±360°
36 month guarantee ... 1,354 types from stock ... no cutting charges
Part No.
Number of cores and conductor nominal cross section
Outer diameter (d) max.
Copper index
Weight
[mm²] [mm] [kg/km] [kg/km]CF211.02.01.02 (2x0.25)C 5.0 16 31CF211.02.02.02 2) (2x(2x0.25))C 6.0 23 41CF211.02.03.02 (3x(2x0.25))C 7.0 32 67CF211.02.04.02 (4x(2x0.25))C 8.0 40 72CF211.02.05.02 (5x(2x0.25))C 8.5 48 87CF211.02.06.02 (6x(2x0.25))C 9.0 56 103CF211.02.08.02 (8x(2x0.25))C 10.5 70 138CF211.02.10.02 (10x(2x0.25))C 12.0 90 169CF211.02.14.02 (14x(2x0.25))C 12.0 108 189CF211.03.03.02 (3x(2x0.34))C 8.0 44 81CF211.03.08.02 (8x(2x0.34))C 11.5 91 169CF211.03.10.02 (10x(2x0.34))C 13.0 111 190CF211.05.01.02 (2x0.5)C 5.5 24 41CF211.05.02.02 2) (2x(2x0.5))C 7.0 37 62CF211.05.03.02 (3x(2x0.5))C 9.0 55 103CF211.05.04.02 (4x(2x0.5))C 9.5 67 128CF211.05.05.02 (5x(2x0.5))C 10.5 83 149CF211.05.06.02 (6x(2x0.5))C 11.5 91 174CF211.05.08.02 (8x(2x0.5))C 13.0 125 224CF211.05.10.02 (10x(2x0.5))C 15.5 170 283CF211.05.14.02 (14x(2x0.5))C 15.5 187 288The chainflex® types marked with 2) are cables designed as a star-quad.Note: The given outer diameters are maximum values and may tend toward lower tolerance limits. G = with green-yellow earth core x = without earth core
Guarantee
month guarantee
135134 EU04
.201
9
EU04
.201
9
CF211.PURPUR
7.5 x d Data cable | PUR | chainflex® CF211.PUR
Dynamic informationBend radius e-chain® linear minimum 7.5 x d
flexible minimum 6 x dfixed minimum 4 x d
Temperature e-chain® linear -25 °C up to +80 °Cflexible -40 °C up to +80 °C (following DIN EN 60811-504)fixed -50 °C up to +80 °C (following DIN EN 50305)
v max. unsupported 5 m/sgliding 3 m/s
a max. 50 m/s²
Travel distance Unsupported travels and up to 100 m for gliding applications, Class 5
Cable structureConductor Very finely stranded special conductors of particularly bending resistant design
made of bare copper wires.Core insulation Mechanically high-quality TPE mixture.
Core structure Cores twisted in pairs with a short pitch length, core pairs then wound with short pitch lengths.
Core identification Colour code in accordance with DIN 47100.
Intermediate layer Foil taping over the outer layer.
Overall shield Extremely bending-resistant braiding made of tinned copper wires.Coverage approx. 70 % linear, approx. 90 % optical
Outer jacket Low-adhesion, halogen-free, highly abrasion resistant PUR mixture, adapted to suit the requirements in e-chains® (following DIN EN 50363-10-2).Colour: Window-grey (similar to RAL 7040)
Electrical informationNominal voltage 300/300 V (following DIN VDE 0298-3)
Testing voltage 1500 V (following DIN EN 50395)
Exa
mpl
e im
age
PVC iguPUR PUR TPE
EPLAN download, configurators www.igus.eu/CF211.PUR
CF211.PURPUR
7.5 x d
Properties and approvalsUV resistance Medium
Oil resistance Oil-resistant (following DIN EN 50363-10-2), Class 3
Offshore MUD-resistant following NEK 606 - status 2009
Flame retardant According to IEC 60332-1-2, CEI 20-35, FT1, VW-1
Silicone-free Free from silicone which can affect paint adhesion (following PV 3.10.7 – status 1992)
Halogen-free Following DIN EN 60754
UL/CSA Style 10493 and 20233, 300 V, 80 °C
NFPA Following NFPA 79-2018, chapter 12.9
DNV-GL Type approval certificate No. 13 656-14 HH
EAC Certificate No. RU C-DE.ME77.B.01254 (TR ZU)
CTP Certificate No. C-DE.PB49.B.00449 (Fire protection)
CEI Following CEI 20-35
Lead-free Following 2011/65/EC (RoHS-II)
Clean room According to ISO Class 1. The outer jacket material of this series complies with CF77.UL.05.12.D - tested by IPA according to standard DIN EN ISO 14644-1
CE Following 2014/35/EU
Class 5.5.3.1
Basic requirements low 1 2 3 4 5 6 7 highest
Travel distance unsupported 1 2 3 4 5 6 ≥ 400 m
Oil resistance none 1 2 3 4 highest
Torsion none 1 2 3 4 ±360°
Guaranteed service life (details see page 22-23)
* Higher number of double strokes? Service life calculation online www.igus.eu/chainflexlife
5 million 7.5 million 10 million
Temperature,from/to [°C]
R min. [factor x d]
R min. [factor x d]
R min. [factor x d]
-25/-15 10 11 12
-15/+70 7.5 8.5 9.5
+70/+80 10 11 12
Double strokes*
36 month guarantee ... 1,354 types from stock ... no cutting charges
z For heavy duty applications zPUR outer jacket z Shielded, twisted pair zOil resistant and coolant-resistant
z Flame retardant zPVC and halogen-free zNotch-resistant zHydrolysis and microbe-resistant
10 millionDouble strokes guaranteed
7.5 x dBend radius, e-chain®
100 mTravel distance, e-chain®
Typical application areas z For heavy duty applications, Class 5 z Unsupported travel distances and up to 100 m for gliding applications, Class 5 z Almost unlimited resistance to oil, Class 3 z No torsion, Class 1 z Indoor and outdoor applications with average sun radiation z Machining units/machine tools, Storage and retrieval units for high-bay warehouses, Packaging industry, quick handling, refrigerating sector
Guarantee
month guarantee
137136 EU04
.201
9
EU04
.201
9
Example image
Data cable | PUR | chainflex® CF211.PUR
CF211.PURPUR
7.5 x d
PVC iguPUR PUR TPE
EPLAN download, configurators www.igus.eu/CF211.PUR
CF211.PURPUR
7.5 x d
Order example: CF211.PUR.02.01.02 – to your desired length (0.5 m steps)CF211.PUR chainflex® series .02 Code nominal cross section .01 Number of pairs .02 Identification pairs
Online order www.chainflex.eu/CF211.PUR
Delivery time 24hrs or today.Delivery time means time until goods are shipped.
Class 5.5.3.1
Basic requirements low 1 2 3 4 5 6 7 highest
Travel distance unsupported 1 2 3 4 5 6 ≥ 400 m
Oil resistance none 1 2 3 4 highest
Torsion none 1 2 3 4 ±360°
36 month guarantee ... 1,354 types from stock ... no cutting charges
Part No.
Number of cores and conductor nominal cross section
Outer diameter (d) max.
Copper index
Weight
[mm²] [mm] [kg/km] [kg/km]CF211.PUR.02.01.02 (2x0.25)C 5.0 16 29CF211.PUR.02.02.02 2) (2x(2x0.25))C 6.0 23 38CF211.PUR.02.03.02 (3x(2x0.25))C 7.0 32 62CF211.PUR.02.04.02 (4x(2x0.25))C 7.5 40 65CF211.PUR.02.05.02 (5x(2x0.25))C 8.5 48 81CF211.PUR.02.06.02 (6x(2x0.25))C 9.0 56 97CF211.PUR.02.08.02 (8x(2x0.25))C 10.5 70 124CF211.PUR.02.10.02 (10x(2x0.25))C 12.0 90 155CF211.PUR.02.14.02 (14x(2x0.25))C 12.0 108 175CF211.PUR.03.03.02 (3x(2x0.34))C 8.0 44 81CF211.PUR.03.08.02 (8x(2x0.34))C 12.0 91 147CF211.PUR.05.01.02 (2x0.5)C 5.5 24 40CF211.PUR.05.02.02 2) (2x(2x0.5))C 7.0 37 59CF211.PUR.05.03.02 (3x(2x0.5))C 9.0 55 98CF211.PUR.05.04.02 (4x(2x0.5))C 9.5 67 118CF211.PUR.05.05.02 (5x(2x0.5))C 10.5 83 149CF211.PUR.05.06.02 (6x(2x0.5))C 11.5 91 174CF211.PUR.05.08.02 (8x(2x0.5))C 13.0 125 211CF211.PUR.05.10.02 (10x(2x0.5))C 15.0 170 265CF211.PUR.05.14.02 (14x(2x0.5))C 15.0 187 288The chainflex® types marked with 2) are cables designed as a star-quad.Note: The given outer diameters are maximum values and may tend toward lower tolerance limits. G = with green-yellow earth core x = without earth core
Guarantee
month guarantee
139138 EU04
.201
9
EU04
.201
9
CF11TPE
6.8 x d Data cable | TPE | chainflex® CF11
Dynamic informationBend radius e-chain® linear minimum 6.8 x d
flexible minimum 5 x dfixed minimum 4 x d
Temperature e-chain® linear -35 °C up to +100 °Cflexible -50 °C up to +100 °C (following DIN EN 60811-504)fixed -55 °C up to +100 °C (following DIN EN 50305)
v max. unsupported 10 m/sgliding 6 m/s
a max. 100 m/s²
Travel distance Unsupported travel distances and up to 400 m and more for gliding applica-tions, Class 6
Cable structureConductor Stranded conductor in especially bending-resistant version consisting of bare
copper wires (following DIN EN 60228).Core insulation Mechanically high-quality TPE mixture.
Core structure Cores twisted in pairs with a short pitch length, core pairs then wound with short pitch lengths.
Core identification Cores < 1.0 mm²: Colour code in accordance with DIN 47100.Cores ≥ 1.0 mm²: Black cores with white numbers.
Inner jacket TPE mixture adapted to suit the requirements in e-chains®.
Overall shield Extremely bending-resistant braiding made of tinned copper wires.Coverage approx. 70 % linear, approx. 90 % optical
Outer jacket Low-adhesion, extremely abrasion-resistant and highly flexible TPE mixture, adapted to suit the requirements in e-chains®.Colour: Steel-blue (similar to RAL 5011)
Electrical informationNominal voltage 300/300 V (following DIN VDE 0298-3)
Testing voltage 1500 V (following DIN EN 50395)
Exa
mpl
e im
age
PVC iguPUR PUR TPE
EPLAN download, configurators www.igus.eu/CF11
CF11TPE
6.8 x d
Properties and approvalsUV resistance High
Oil resistance Oil resistant (following DIN EN 60811-404), bio-oil resistant (following VDMA 24568 with Plantocut 8 S-MB tested by DEA), Class 4
Silicone-free Free from silicone which can affect paint adhesion (following PV 3.10.7 – status 1992)
Halogen-free Following DIN EN 60754
EAC Certificate No. RU C-DE.ME77.B.01254 (TR ZU)
Lead-free Following 2011/65/EC (RoHS-II)
Clean room According to ISO Class 1. The outer jacket material of this series complies with CF9.15.07 - tested by IPA according to standard DIN EN ISO 14644-1
CE Following 2014/35/EU
Class 6.6.4.1
Basic requirements low 1 2 3 4 5 6 7 highest
Travel distance unsupported 1 2 3 4 5 6 ≥ 400 m
Oil resistance none 1 2 3 4 highest
Torsion none 1 2 3 4 ±360°
Guaranteed service life (details see page 22-23)
* Higher number of double strokes? Service life calculation online www.igus.eu/chainflexlife
5 million 7.5 million 10 million
Temperature,from/to [°C]
R min. [factor x d]
R min. [factor x d]
R min. [factor x d]
-35/-25 7.5 8.5 9.5
-25/+90 6.8 7.5 8.5
+90/+100 7.5 8.5 9.5
Double strokes*
36 month guarantee ... 1,354 types from stock ... no cutting charges
z For extremely heavy duty applications z TPE outer jacket z Shielded z Twisted pair
zOil and bio-oil resistant zPVC and halogen-free zHydrolysis and microbe-resistant
10 millionDouble strokes guaranteed
6.8 x dBend radius, e-chain®
400 mTravel distance, e-chain®
Typical application areas z For extremely heavy duty applications, Class 6 z Unsupported travel distances and up to 400 m and more for gliding applications, Class 6 z Almost unlimited resistance to oil, also with bio-oils, Class 4 z No torsion, Class 1 z Indoor and outdoor applications, UV-resistant z Storage and retrieval units for high-bay warehouses, Machining units/machine tools, quick handling, Clean room, semiconductor insertion, outdoor cranes, low temperature applications
Guarantee
month guarantee
141140 EU04
.201
9
EU04
.201
9
Example image
Data cable | TPE | chainflex® CF11
CF11TPE
6.8 x d
PVC iguPUR PUR TPE
EPLAN download, configurators www.igus.eu/CF11
CF11TPE
6.8 x d
Order example: CF11.01.04.02 – to your desired length (0.5 m steps)CF11 chainflex® series .01 Code nominal cross section .04 Number of pairs .02 Identification pairs
Online order www.chainflex.eu/CF11
Delivery time 24hrs or today.Delivery time means time until goods are shipped.
Class 6.6.4.1
Basic requirements low 1 2 3 4 5 6 7 highest
Travel distance unsupported 1 2 3 4 5 6 ≥ 400 m
Oil resistance none 1 2 3 4 highest
Torsion none 1 2 3 4 ±360°
36 month guarantee ... 1,354 types from stock ... no cutting charges
Part No.
Number of cores and conductor nominal cross section
Outer diameter (d) max.
Copper index
Weight
[mm²] [mm] [kg/km] [kg/km]CF11.01.04.02 (4x(2x0.14))C 7.5 30 64CF11.01.18.02 (18x(2x0.14))C 12.0 101 192CF11.02.01.02 (2x0.25)C 6.0 17 38CF11.02.02.02 2) (2x(2x0.25))C 6.5 26 49CF11.02.03.02 (3x(2x0.25))C 8.0 35 78CF11.02.04.02 (4x(2x0.25))C 8.5 42 89CF11.02.05.02 (5x(2x0.25))C 9.0 49 104CF11.02.06.02 (6x(2x0.25))C 10.0 69 130CF11.02.10.02 (10x(2x0.25))C 13.0 103 217CF11.02.14.02 (14x(2x0.25))C 13.5 124 224CF11.03.08.02 (8x(2x0.34))C 13.0 106 220CF11.05.04.02 (4x(2x0.5))C 9.5 77 133CF11.05.06.02 (6x(2x0.5))C 12.0 103 198CF11.05.08.02 (8x(2x0.5))C 14.0 135 261CF11.07.03.02 (3x(2x0.75))C 10.0 83 155CF11.10.04.02 (4x(2x1.0))C 12.0 125 228CF11.15.06.02 (6x(2x1.5))C 17.0 247 411The chainflex® types marked with 2) are cables designed as a star-quad.Note: The given outer diameters are maximum values and may tend toward lower tolerance limits. G = with green-yellow earth core x = without earth core
Guarantee
month guarantee
143142 EU04
.201
9
EU04
.201
9
CF112PUR
10 x d Data cable | PUR | chainflex® CF112
Dynamic informationBend radius e-chain® linear minimum 10 x d
flexible minimum 8 x dfixed minimum 5 x d
Temperature e-chain® linear -25 °C up to +80 °Cflexible -40 °C up to +80 °C (following DIN EN 60811-504)fixed -50 °C up to +80 °C (following DIN EN 50305)
v max. unsupported 10 m/sgliding 5 m/s
a max. 80 m/s²
Travel distance Unsupported travels and up to 100 m for gliding applications, Class 5
Cable structureConductor Very finely stranded special conductors of particularly bending resistant design
made of bare copper wires.Core insulation Mechanically high-quality TPE mixture.
Core structure Cores twisted in pairs with a short pitch length, core pairs then wound with short pitch lengths.
Core identification Colour code in accordance with DIN 47100.
Element shield Extremely bending-resistant braiding made of tinned copper wires.Coverage approx. 70 % linear, approx. 90 % optical
Inner jacket TPE mixture adapted to suit the requirements in e-chains®.
Overall shield Extremely bending-resistant braiding made of tinned copper wires.Coverage approx. 70 % linear, approx. 90 % optical
Outer jacket Low-adhesion, extremely abrasion-resistant and highly flexible TPE mixture, adapted to suit the requirements in e-chains®.Colour: Anthracite grey (similar to RAL 7016)
Electrical informationNominal voltage 300/300 V (following DIN VDE 0298-3)
Testing voltage 1500 V (following DIN EN 50395)
Exa
mpl
e im
age
PVC iguPUR PUR TPE
EPLAN download, configurators www.igus.eu/CF112
CF112PUR
10 x d
Properties and approvalsUV resistance High
Oil resistance Oil-resistant (following DIN EN 50363-10-2), Class 3
Offshore MUD-resistant following NEK 606 - status 2009
Flame retardant According to IEC 60332-1-2, CEI 20-35, FT1, VW-1
Silicone-free Free from silicone which can affect paint adhesion (following PV 3.10.7 – status 1992)
Halogen-free Following DIN EN 60754
UL/CSA Style 10493 and 20233, 300 V, 80 °C
NFPA Following NFPA 79-2018, chapter 12.9
DNV-GL Type approval certificate No. 13 656-14 HH
EAC Certificate No. RU C-DE.ME77.B.01254 (TR ZU)
CTP Certificate No. C-DE.PB49.B.00416 (Fire protection)
CEI Following CEI 20-35
Lead-free Following 2011/65/EC (RoHS-II)
Clean room According to ISO Class 1. The outer jacket material of this series complies with CF77.UL.05.12.D - tested by IPA according to standard DIN EN ISO 14644-1
CE Following 2014/35/EU
Class 6.5.3.1
Basic requirements low 1 2 3 4 5 6 7 highest
Travel distance unsupported 1 2 3 4 5 6 ≥ 400 m
Oil resistance none 1 2 3 4 highest
Torsion none 1 2 3 4 ±360°
Guaranteed service life (details see page 22-23)
* Higher number of double strokes? Service life calculation online www.igus.eu/chainflexlife
5 million 7.5 million 10 million
Temperature,from/to [°C]
R min. [factor x d]
R min. [factor x d]
R min. [factor x d]
-25/-15 12.5 13.5 14.5
-15/+70 10 11 12
+70/+80 12.5 13.5 14.5
Double strokes*
36 month guarantee ... 1,354 types from stock ... no cutting charges
z For extremely heavy duty applications zPUR outer jacket zDouble shielded, twisted pair zOil resistant and coolant-resistant
z Flame retardant zPVC and halogen-free zNotch-resistant zHydrolysis and microbe-resistant
10 millionDouble strokes guaranteed
10 x dBend radius, e-chain®
100 mTravel distance, e-chain®
Typical application areas z For heaviest duty applications, Class 6 z Unsupported travel distances and up to 100 m for gliding applications, Class 5 z Almost unlimited resistance to oil, Class 3 z No torsion, Class 1 z Indoor and outdoor applications with average sun radiation z Machining units/machine tools, Storage and retrieval units for high-bay warehouses, Packaging industry, quick handling, refrigerating sector
Guarantee
month guarantee
145144 EU04
.201
9
EU04
.201
9
Example image
Data cable | PUR | chainflex® CF112
CF112PUR
10 x d
PVC iguPUR PUR TPE
EPLAN download, configurators www.igus.eu/CF112
CF112PUR
10 x d
Order example: CF112.02.02.02 – to your desired length (0.5 m steps)CF112 chainflex® series .02 Code nominal cross section .02 Number of pairs .02 Identification pairs
Online order www.chainflex.eu/CF112
Delivery time 24hrs or today.Delivery time means time until goods are shipped.
Class 6.5.3.1
Basic requirements low 1 2 3 4 5 6 7 highest
Travel distance unsupported 1 2 3 4 5 6 ≥ 400 m
Oil resistance none 1 2 3 4 highest
Torsion none 1 2 3 4 ±360°
36 month guarantee ... 1,354 types from stock ... no cutting charges
Part No.
Number of cores and conductor nominal cross section
Outer diameter (d) max.
Copper index
Weight
[mm²] [mm] [kg/km] [kg/km]CF112.02.02.02 (2x(2x0.25)C)C 9.5 56 128CF112.02.03.02 (3x(2x0.25)C)C 10.0 71 147CF112.02.04.02 (4x(2x0.25)C)C 11.0 81 163CF112.02.05.02 (5x(2x0.25)C)C 11.5 99 188CF112.05.02.02 (2x(2x0.5)C)C 11.5 75 171CF112.05.04.02 (4x(2x0.5)C)C 13.0 116 225CF112.05.06.02 (6x(2x0.5)C)C 14.5 160 312Note: The given outer diameters are maximum values and may tend toward lower tolerance limits. G = with green-yellow earth core x = without earth core
Guarantee
month guarantee
147146 EU04
.201
9
EU04
.201
9
CF12TPE
10 x d Data cable | TPE | chainflex® CF12
Dynamic informationBend radius e-chain® linear minimum 10 x d
flexible minimum 8 x dfixed minimum 5 x d
Temperature e-chain® linear -35 °C up to +100 °Cflexible -50 °C up to +100 °C (following DIN EN 60811-504)fixed -55 °C up to +100 °C (following DIN EN 50305)
v max. unsupported 10 m/sgliding 6 m/s
a max. 100 m/s²
Travel distance Unsupported travel distances and up to 400 m and more for gliding applica-tions, Class 6
Cable structureConductor Stranded conductor in especially bending-resistant version consisting of bare
copper wires (following DIN EN 60228).Core insulation Mechanically high-quality TPE mixture.
Core structure Cores twisted in pairs with a short pitch length, core pairs then wound with short pitch lengths.
Core identification Cores < 0.5 mm²: Colour code in accordance with DIN 47100.Cores ≥ 0.5 mm²: Black cores with white numbers.
Element shield Extremely bending-resistant braiding made of tinned copper wires.Coverage approx. 70 % linear, approx. 90 % optical
Element jacket TPE mixture on pair shielding adapted to suit the requirements in e-chains®.
Inner jacket TPE mixture adapted to suit the requirements in e-chains®.
Overall shield Highly flexible shield consisting of galvanized steel wire braid.Coverage approx. 70 % linear, approx. 90 % optical
Outer jacket Low-adhesion, extremely abrasion-resistant and highly flexible TPE mixture, adapted to suit the requirements in e-chains®.Colour: Steel-blue (similar to RAL 5011)
Electrical informationNominal voltage 300/300 V (following DIN VDE 0298-3)
Testing voltage 1500 V (following DIN EN 50395)
Exa
mpl
e im
age
PVC iguPUR PUR TPE
EPLAN download, configurators www.igus.eu/CF12
CF12TPE
10 x d
Properties and approvalsUV resistance High
Oil resistance Oil resistant (following DIN EN 60811-404), bio-oil resistant (following VDMA 24568 with Plantocut 8 S-MB tested by DEA), Class 4
Silicone-free Free from silicone which can affect paint adhesion (following PV 3.10.7 – status 1992)
Halogen-free Following DIN EN 60754
EAC Certificate No. RU C-DE.ME77.B.01254 (TR ZU)
Lead-free Following 2011/65/EC (RoHS-II)
Clean room According to ISO Class 1. The outer jacket material of this series complies with CF9.15.07 - tested by IPA according to standard DIN EN ISO 14644-1
CE Following 2014/35/EU
Class 6.6.4.1
Basic requirements low 1 2 3 4 5 6 7 highest
Travel distance unsupported 1 2 3 4 5 6 ≥ 400 m
Oil resistance none 1 2 3 4 highest
Torsion none 1 2 3 4 ±360°
Guaranteed service life (details see page 22-23)
* Higher number of double strokes? Service life calculation online www.igus.eu/chainflexlife
5 million 7.5 million 10 million
Temperature,from/to [°C]
R min. [factor x d]
R min. [factor x d]
R min. [factor x d]
-35/-25 12.5 13.5 14.5
-25/+90 10 11 12
+90/+100 12.5 13.5 14.5
Double strokes*
36 month guarantee ... 1,354 types from stock ... no cutting charges
z For extremely heavy duty applications z TPE outer jacket zDouble-shielded zOil and bio-oil resistant
zPVC and halogen-free zHydrolysis and microbe-resistant
10 millionDouble strokes guaranteed
10 x dBend radius, e-chain®
400 mTravel distance, e-chain®
Typical application areas z For heaviest duty applications, Class 6 z Unsupported travel distances and up to 400 m and more for gliding applications, Class 6 z Almost unlimited resistance to oil, also with bio-oils, Class 4 z No torsion, Class 1 z Indoor and outdoor applications, UV-resistant z For maximum EMC protection z Storage and retrieval units for high-bay warehouses, Machining units/machine tools, quick handling, Clean room, semiconductor insertion, outdoor cranes, low temperature applications
Part No.
Number of cores and conductor nominal cross section
Outer diameter (d) max.
Copper index
Weight
[mm²] [mm] [kg/km] [kg/km]CF12.02.04.02 (4x(2x0.25)C)C 11.0 51 174CF12.05.03.02 (3x(2x0.5)C)C 13.5 65 228CF12.05.04.02 (4x(2x0.5)C)C 14.5 83 266CF12.05.06.02 (6x(2x0.5)C)C 17.0 128 388CF12.05.08.02 (8x(2x0.5)C)C 20.5 163 516CF12.05.10.02 (10x(2x0.5)C)C 23.0 203 600CF12.05.14.02 (14x(2x0.5)C)C 23.0 297 705CF12.10.06.02 (6x(2x1.0)C)C 20.0 198 537Note: The given outer diameters are maximum values and may tend toward lower tolerance limits. G = with green-yellow earth core x = without earth core
Guarantee
month guarantee
149148 EU04
.201
9
EU04
.201
9
CF298TPE4 x d Data cable | TPE | chainflex® CF298
Dynamic informationBend radius e-chain® linear minimum 4 x d
flexible minimum 4 x dfixed minimum 3 x d
Temperature e-chain® linear -35 °C up to +90 °Cflexible -50 °C up to +90 °C (following DIN EN 60811-504)fixed -55 °C up to +90 °C (following DIN EN 50305)
v max. unsupported 10 m/sgliding 6 m/s
a max. 100 m/s2
Travel distance Short, very fast applications with small radii and restricted installation space, Class 5
Torsion ± 90°, with 1 m cable length, Class 2
Cable structureConductor Conductor consisting of a highly flexible special alloy.
Core insulation Mechanically high-quality TPE mixture.
Core structure Cores wound in a layer with especially short pitch length.
Core identification Colour code in accordance with DIN 47100.CF298.02.03: brown, blue, blackCF298.03.04: brown, blue, black, white
Outer jacket Low-adhesion, extremely abrasion-resistant and highly flexible TPE mixture, adapted to suit the requirements in e-chains®.Colour: Steel-blue (similar to RAL 5011)
Electrical informationNominal voltage 300/300 V
Testing voltage 1500 V
Exa
mpl
e im
age
PVC iguPUR PUR TPE
EPLAN download, configurators www.igus.eu/CF298
CF298TPE4 x d
Properties and approvalsUV resistance High
Oil resistance Oil resistant (following DIN EN 60811-404), bio-oil resistant (following VDMA 24568 with Plantocut 8 S-MB tested by DEA), Class 4
Silicone-free Free from silicone which can affect paint adhesion (following PV 3.10.7 – status 1992)
Halogen-free Following DIN EN 60754
EAC Certificate No. RU C-DE.ME77.B.02806 (TR ZU)
Lead-free Following 2011/65/EC (RoHS-II)
Clean room According to ISO Class 1. The outer jacket material of this series complies with CF9.15.07 - tested by IPA according to standard DIN EN ISO 14644-1
CE Following 2014/35/EU
Class 7.5.4.2
Basic requirements low 1 2 3 4 5 6 7 highest
Travel distance unsupported 1 2 3 4 5 6 ≥ 400 m
Oil resistance none 1 2 3 4 highest
Torsion none 1 2 3 4 ±360°
Guaranteed service life (details see page 22-23)
* Higher number of double strokes? Service life calculation online www.igus.eu/chainflexlife
10 million 15 million 20 million
Temperature,from/to [°C]
R min. [factor x d] R min. [factor x d] R min. [factor x d]
-35/-25 5 6 7
-25/+80 4 5 6
+80/+90 5 6 7
Double strokes*
36 month guarantee ... 1,354 types from stock ... no cutting charges
Note: The given outer diameters are maximum values and may tend toward lower tolerance limits. G = with green-yellow earth core x = without earth core
z For heaviest duty applications and especially small radii down to 4 x d z TPE outer jacket zOil and bio-oil resistant
zPVC and halogen-free z Low-temperature-flexible zHydrolysis and microbe-resistant
20 millionDouble strokes guaranteed
4 x dBend radius, e-chain®
100 mTravel distance, e-chain®
Typical application areas z For heaviest duty applications and especially small radii down to 4 x d, Class 7 z Especially for short, very fast applications with small radii and restricted installation space, Class 5 z Almost unlimited resistance to oil, also with bio-oils, Class 4 z Torsion ± 90°, with 1 m cable length, Class 2 z Indoor and outdoor applications, UV-resistant z Pick and place machines, automatic doors, Clean room, very quick handling
Part No.
Number of cores and conductor nominal cross section
Outer diameter (d) max.
Copper index
Weight
[mm²] [mm] [kg/km] [kg/km]CF298.01.02 2x0.14 4.5 5 15CF298.01.04 4x0.14 5.5 9 25CF298.01.08 8x0.14 7.0 16 44CF298.02.03 3x0.25 5.5 12 28CF298.02.04 4x0.25 6.0 16 35CF298.02.07 7x0.25 7.0 28 53CF298.02.08 8x0.25 7.5 32 61CF298.03.04 4x0.34 6.0 19 37CF298.03.07 7x0.34 7.5 33 62CF298.05.04 4x0.5 6.5 27 48
Guarantee
month guarantee
151150 EU04
.201
9
EU04
.201
9
CF299TPE4 x d Data cable | TPE | chainflex® CF299
Dynamic informationBend radius e-chain® linear minimum 4 x d
flexible minimum 4 x dfixed minimum 3 x d
Temperature e-chain® linear -35 °C up to +90 °Cflexible -50 °C up to +90 °C (following DIN EN 60811-504)fixed -55 °C up to +90 °C (following DIN EN 50305)
v max. unsupported 10 m/sgliding 6 m/s
a max. 100 m/s2
Travel distance Short, very fast applications with small radii and restricted installation space, Class 5
Cable structureConductor Conductor consisting of a highly flexible special alloy.
Core insulation Mechanically high-quality TPE mixture.
Core structure Cores wound in a layer with especially short pitch length.
Core identification Colour code in accordance with DIN 47100.
Inner jacket TPE mixture adapted to suit the requirements in e-chains®.
Overall shield Extremely bending resistant braiding made of alloy wires.Coverage approx. 70 % linear, approx. 90 % optical
Outer jacket Low-adhesion, extremely abrasion-resistant and highly flexible TPE mixture, adapted to suit the requirements in e-chains®.Colour: Steel-blue (similar to RAL 5011)
Electrical informationNominal voltage 300/300 V
Testing voltage 1500 V
Exa
mpl
e im
age
PVC iguPUR PUR TPE
EPLAN download, configurators www.igus.eu/CF299
CF299TPE4 x d
Properties and approvalsUV resistance High
Oil resistance Oil resistant (following DIN EN 60811-404), bio-oil resistant (following VDMA 24568 with Plantocut 8 S-MB tested by DEA), Class 4
Silicone-free Free from silicone which can affect paint adhesion (following PV 3.10.7 – status 1992)
Halogen-free Following DIN EN 60754
EAC Certificate No. RU C-DE.ME77.B.02806 (TR ZU)
Lead-free Following 2011/65/EC (RoHS-II)
Clean room According to ISO Class 1. The outer jacket material of this series complies with CF9.15.07 - tested by IPA according to standard DIN EN ISO 14644-1
CE Following 2014/35/EU
Class 7.5.4.1
Basic requirements low 1 2 3 4 5 6 7 highest
Travel distance unsupported 1 2 3 4 5 6 ≥ 400 m
Oil resistance none 1 2 3 4 highest
Torsion none 1 2 3 4 ±360°
Guaranteed service life (details see page 22-23)
* Higher number of double strokes? Service life calculation online www.igus.eu/chainflexlife
10 million 15 million 20 million
Temperature,from/to [°C]
R min. [factor x d] R min. [factor x d] R min. [factor x d]
-35/-25 5 6 7
-25/+80 4 5 6
+80/+90 5 6 7
Double strokes*
36 month guarantee ... 1,354 types from stock ... no cutting charges
Note: The given outer diameters are maximum values and may tend toward lower tolerance limits. G = with green-yellow earth core x = without earth core
z For heaviest duty applications and especially small radii down to 4 x d z TPE outer jacket z Shielded
zOil and bio-oil resistant zPVC and halogen-free z Low-temperature-flexible zHydrolysis and microbe-resistant
20 millionDouble strokes guaranteed
4 x dBend radius, e-chain®
100 mTravel distance, e-chain®
Typical application areas z For heaviest duty applications and especially small radii down to 4 x d, Class 7 z Especially for short, very fast applications with small radii and restricted installation space, Class 5 z Almost unlimited resistance to oil, also with bio-oils, Class 4 z No torsion, Class 1 z Indoor and outdoor applications, UV-resistant z Pick and place machines, automatic doors, Clean room, very quick handling
Part No.
Number of cores and conductor nominal cross section
Outer diameter (d) max.
Copper index
Weight
[mm²] [mm] [kg/km] [kg/km]CF299.01.02 (2x0.14)C 6.0 17 36CF299.01.04 (4x0.14)C 6.5 22 45CF299.01.08 (8x0.14)C 8.5 35 75CF299.02.04 (4x0.25)C 7.0 32 57CF299.02.07 (7x0.25)C 8.5 46 83
Guarantee
month guarantee
153152 EU04
.201
9
EU04
.201
9
CFKoaxTPE
10 x d Coax cable | TPE | chainflex® CFKoax
Dynamic informationBend radius e-chain® linear minimum 10 x d
flexible minimum 8 x dfixed minimum 5 x d
Temperature e-chain® linear -35 °C up to +100 °C (CFKoax1/3) -35 °C up to +70 °C (CFKoax2)flexible -50 °C up to +100 °C (CFKoax1/3) -50 °C up to +70 °C (CFKoax2)fixed -55 °C up to +100 °C (CFKoax1/3) -55 °C up to +70 °C (CFKoax2)
v max. unsupported 10 m/sgliding 5 m/s
a max. 100 m/s²
Travel distance Unsupported travel distances and up to 400 m and more for gliding applica-tions, Class 6
Cable structureConductor Multi-wire; adapted to single-wire diameter with pitch length to suit the require-
ments in e-chains®.Core insulation Special FEP mixture (CFKoax1/3)
Special PE mixture. (CFKoax2)Core structure Cores wound in a layer with especially short pitch length.
Core identification Coaxial elements Product range table
Element shield Extremely bending-resistant braiding made of tinned copper wires.Coverage approx. 70 % linear, approx. 90 % optical
Element jacket TPE mixture adapted to suit the requirements in e-chains®.
Outer jacket Low-adhesion, extremely abrasion-resistant and highly flexible TPE mixture, adapted to suit the requirements in e-chains®.Colour: Product range table
Exa
mpl
e im
age
PVC iguPUR PUR TPE
EPLAN download, configurators www.igus.eu/CFKoax
CFKoaxTPE
10 x d
Electrical informationNominal voltage 500/500 V (following DIN VDE 0298-3)
Testing voltage 1500 V (following DIN EN 50395)
Properties and approvalsUV resistance Medium
Oil resistance Oil resistant (following DIN EN 60811-404), bio-oil resistant (following VDMA 24568 with Plantocut 8 S-MB tested by DEA), Class 4
Silicone-free Free from silicone which can affect paint adhesion (following PV 3.10.7 – status 1992)
EAC Certificate No. RU C-DE.ME77.B.01254 (TR ZU)
Lead-free Following 2011/65/EC (RoHS-II)
Clean room According to ISO Class 1. The outer jacket material of this series complies with CF9.15.07 - tested by IPA according to standard DIN EN ISO 14644-1
CE Following 2014/35/EU
Info The coaxial elements used in cables of the CFKoax1 series are comparable with a HF75-0.3/1.6 according to MIL-C-17/94-RG179 and thus fit into an RG179 plug.The coaxial elements used in cables of the CFKoax2 series are comparable with a HF50-0.9/2.95 according to MIL-C-17/28-RG58 and thus fit into an RG58 plug.The coaxial elements used in cables of the CFKoax3 series are comparable with a HF50-0.3/0.84 according to MIL-C-17/93-RG178 and thus fit into an RG178 plug.
Class 6.6.4.1
Basic requirements low 1 2 3 4 5 6 7 highest
Travel distance unsupported 1 2 3 4 5 6 ≥ 400 m
Oil resistance none 1 2 3 4 highest
Torsion none 1 2 3 4 ±360°
36 month guarantee ... 1,354 types from stock ... no cutting charges
z For extremely heavy duty applications z TPE outer jacket zOil and bio-oil resistant zUV-resistant
zHydrolysis and microbe-resistant
10 millionDouble strokes guaranteed
10 x dBend radius, e-chain®
400 mTravel distance, e-chain®
Typical application areas z For heaviest duty applications, Class 6 z Almost unlimited resistance to oil, also with bio-oils, Class 4 z Unsupported travel distances and up to 400 m and more for gliding applications, Class 6 z No torsion, Class 1 z Indoor and outdoor applications with average sun radiation z Storage and retrieval units for high-bay warehouses, Machining units/machine tools, quick handling, Clean room, semiconductor insertion, indoor cranes, low temperature applications
Guaranteed service life (details see page 22-23)
* Higher number of double strokes? Online lifetime calculation: www.igus.eu/chainflexlife
*
Double strokes* 5 million 7.5 million 10 million
Temperature,from/to [°C]
R min. [factor x d]
R min. [factor x d]
R min. [factor x d]
-35/-25 12,5 13,5 14,5
-25/+60 (CFKoax2) 10 11 12
-25/+90 (CFKoax1/3) 10 11 12
+60/+70 (CFKoax2) 12,5 13,5 14,5
+90/+100 (CFKoax1/3) 12,5 13,5 14,5
Guarantee
month guarantee
155154 EU04
.201
9
EU04
.201
9
Example image
Coax cable | TPE | chainflex® CFKoax
Part No. Coaxial elements Outer diameter (d) max.
Copper index
Weight
[mm] [kg/km] [kg/km]CFKoax1.01 1 4.5 7 23CFKoax1.05 5 10.0 33 110CFKoax2.01 1 5.5 19 36CFKoax3.01 1 3.0 5 11
Part No. Characteristic wace imped-ance [Ω]]
Conductor/ Core diameter nominal [mm]
Colour code Colour outer jacket (similar to RAL)
CFKoax1.01 75 0.3/1.6 red Steel-blue (similar to RAL 5011)CFKoax1.05 75 0.3/1.6 red, green, blue, white, black Steel-blue (similar to RAL 5011)CFKoax2.01 50 0.9/2.95 - Jet black (similar to RAL 9005)CFKoax3.01 50 0.3/0.85 - Window-grey (similar to RAL 7040)
Note: The given outer diameters are maximum values and may tend toward lower tolerance limits. G = with green-yellow earth core x = without earth core
CFKoaxTPE
10 x d
PVC iguPUR PUR TPE
EPLAN download, configurators www.igus.eu/CFKoax
CFKoaxTPE
10 x d
Order example: CFKoax1.01 – to your desired length (0.5 m steps)CFKoax chainflex® series .01 Number of coaxial elements
Online order www.chainflex.eu/CFKoax
Delivery time 24hrs or today.Delivery time means time until goods are shipped.
Class 6.6.4.1
Basic requirements low 1 2 3 4 5 6 7 highest
Travel distance unsupported 1 2 3 4 5 6 ≥ 400 m
Oil resistance none 1 2 3 4 highest
Torsion none 1 2 3 4 ±360°
36 month guarantee ... 1,354 types from stock ... no cutting charges
Coax cable and other chainflex® cables in stage technology. e-chain®: System E4/4
Guarantee
month guarantee