pvc-c - IPS Flow Systems · 156 about: pvc-c General properties of PVC-C PVC-C is thermally stable...

pvc-c

IPS Flow SystemsSeaham Grange Industrial Estate, Seaham, Co Durham, SR7 0PT, England

Tel: +44+ 191 521 3111 Fax: +44+ 191 521 3222E-mail: [email protected] Website: www.ipsflowsystems.com

Chlorinated Polyvinyl Chloride (PVC-C) is a modified PVC with additional high temperature strength. It has been developed to handle hot, corrosive liquids at working temperatures up to 100˚C, whilst offering the ease of installation of cold solvent welded jointing.

PVC-C is inert to many mineral acids, bases, salts, paraffinic hydrocarbons, halogens and alcohols. It will not support combustion and is rated as self extinguishing. The low thermal conductivity of the material reduces moisture condensation on water lines, and will maintain the temperature of fluids with minimal insulation.

With a similar working temperature range to polypropylene, PVC-C has greater rigidity and lower thermal expansion, making it particularly suitable for above ground process pipework.

application guide

Pipe - Inch Size 146Solvent Cement, Primer, Cleaner 147

Plain Fittings - Inch Size 148Adaptor Fittings - Inch Size 153

Saddles - Inch Size 156Threaded Fittings - Inch Size 158

Flanges - Inch Size 160Valves - Inch Size

Ball Valve, True Union 162Ball Valve Brackets, True Union 164

Ball Valve, T-Port & L-Port 166Gate Valve 168

Butterfly Valve 169Diaphragm Valve 170

Needle Valve 171Ball Valve, Laboratory 172

Globe Valve 172Y-Pattern Valve 173

Non-Return Valve, Check 174Basket Strainer 176

Y-Strainer 177Pipe - mm Size 178

Plain Fittings - mm Size 179Adaptor Fittings - mm Size 181

Flanges - mm Size 182Valves - mm Size

Ball Valves 183Diaphragm Valve 184

Strainer 185Check Valve 185

section guide

Inch Sizes:Pipe : ASTM F-441Plain Fittings : ASTM F-439Threaded fittings : ASTM F-437PVC-C material : ASTM D-1784Metric Sizes:Pipe : DIN 8079Pipe quality & test : DIN 8080Plain Fittings : DIN 8063Threaded fittings : BS21/DIN 2999/ISO7

PVC-C pipes and fittings are WRAS listed for use in contact with cold potable water.

standards and approvals

Temperature range 5˚C to 100˚CGood mechanical strengthLow thermal conductivityOdourless and tastelessRigid pipes are suitable for above ground useResistant to many inorganic chemicalsThreading possibleSizes from 1/4” to 18” and 16mm to 160mmNo special jointing tools requiredNon flammable and self extinguishing

Not resistant to organic solvents

3

142

about: pvc-c

General properties of PVC-C

PVC-C is thermally stable in the temperature range 5°C to 100°C, however at low temperatures the impact strength of PVC-C decreases. It is therefore not recommended for use at very low temperatures unless there is no likelihood of the piping materials being disturbed or subjected to impact damage. PVC-C is free from toxic metals thus ensuring that it is physiologically harmless for drinking water and foodstuffs applications.

Some important advantages of PVC-C are:

- Low Specific weight 1.5 g/cm3

- Wide range of applications- Good chemical and corrosion resistance- Safe for potable water applications- Low friction loss- Self extinguishing- High mechanical strength- Low coefficient of thermal expansion- Rigid and requires less support

CharacteristicsChemical resistance

PVC-C has excellent chemical resistance to common industrial chemicals, such as acids, bases and salt solutions. Resistance to sodium hypochlorite solutions is also very good. PVC-C is not resistant to aromatic and chlorinated hydrocarbons, solvents, esters and ketones. The chemical resistance of PVC-C should be checked with our technical department for applications involving varnish, oils or fats, and PVC-C is not recommended for use with compressed air or gases.

Chemical resistance of solvent cement welded joints

The chemical resistance of the joints in a solvent welded piping system are the same as the material itself. However, PVC-C solvent welded joints in systems handling the following chemicals can be degraded and require the use of Weld On 724 solvent cement to ensure chemical compatibility:

Hydrochloric Acid 25%+ concentrationNitric Acid 20%+ concentrationSulphuric Acid 70%+ concentrationHydrofluoric Acid in any concentration

Weathering resistance

With the use of additives such as ultraviolet absorbers, PVC-C systems display excellent weathering resistance to the long-term effects of sunlight, wind and rain. Over time, grey PVC-C will lose some of its colour because of exposure to UV light and it will have slightly reduced impact strength. In extreme cases, the use of insulation or an application of UV absorbent coating such as AGRU Coat or the use of a water based paint will help to minimise the effects of solar radiation.

Electrical characteristics

PVC-C is non-conductive, therefore systems will remain free from electrolytic corrosion. Precautions should be taken to avoid static discharge should any part of a PVC-C piping system pass through an area where explosive gases may be present.

Physiological characteristics

PVC-C piping systems from IPS are free from lead, cadmium or other poisonous heavy metals. They are suitable for use in contact with cold potable water, and are WRAS listed for this application.

Post-chlorinated Polyvinylchloride (PVC-C) is a highly versatile material that is used for both pressure and drainage piping systems for above and below ground applications. It is a rigid thermoplastic material with good tensile, flexural and mechanical strength, low moisture absorption, good flammability characteristics, exceptional dimensional stability and good tenacity.

PVC-C also has excellent chemical resistance across its operating temperature range of 0°C to 90°C, with a broad band of operating pressures. In addition, because of its long-term strength characteristics, high stiffness and cost effectiveness, PVC-C systems are suitable for a wide diversity of thermoplastic piping installations.

PVC-C systems feature a broad range of pipe sizes, fitting configurations, valve choices and ancillary items.

PVC-C piping systems are joined by solvent cement welding, whilst transition joints can be made using flanges, threaded connections, mechanical fittings, and compression fittings.

IPS supplies a comprehensive range of PVC-C piping systems in both inch and metric dimensions, according to ASTM and DIN standards. Systems are available in inch sizes up to 24″ for use as both pressure and ventilation piping systems, and in metric sizes up to 160mm.

Properties of PVC-C (Average values)

Property Value

Density 1.55 g/cm3

Tensile Strength 55 N/mm2

Elongation at Break 3 %

Impact Strength 80 J/m (23°C)

Modulus of Elasticity (Young’s Modulus) 2500 N/mm2

Coefficient of Linear Expansion 0.07 mm/m°C

Maximum Operating Temperature 90°C

Minimum Operating Temperature 0 °C

Vicat Softening Point > 105°C (VST/B 50)

Water Absorption 0.03%

Surface Resistance Approx. 1013 Ω

Thermal Conductivity 0.066 W/m · K

Flammability V-0 UL94

Colour Light Grey

IPS Flow Systems l Seaham Grange Industrial Estate l Seaham l Co Durham l SR7 0PT l Tel: 0191 521 3111 l www.ipsflowsystems.com

3

143

about: pvc-c

Maximum continuous pressure ratings

Pipes, fittings and valves are designed to operate continuously for 50 years at their maximum rated pressure at 20°C as follows, unless otherwise stated.

Inch sizes - ASTM Standard

PVC-C piping systems manufactured in accordance with ASTM requirements use a ‘schedule’ system of pressure ratings. Pipes are produced in two different ‘schedules’, 40 & 80. Under this system the pressure rating of the pipe changes according to the pipe nominal bore size. Reference should be made to the pipe availability guide to verify the pressure ratings available for the sizes required.

Unlike pipe, there is presently no industry standard that specifies a working pressure for fittings. Moulded pipe fittings are manufactured to meet the minimum burst pressure requirements to that of the pipe. In common with the pipe, the pressure rating of the fittings decreases as the nominal pipe sizes increases. The advisory pressure ratings for ASTM fittings is as follows:-

Pressure ratings for pvc-c systems

Moulded Fittings Size Range Max. Operating Pressure 1/4″ to 8″ 16 Bar 10″ to 12″ 10 BarFabricated Fittings 4″ to 16″ 10 BarSR Threaded Fittings 1/4″ to 4″ 16 Bar 6″ 12 BarUnreinforced Threaded Fittings 1/4″ to 6″ 10 Bar

Pipe Size Range Max. Operating Pressure PN16 16mm to 110mm 16 Bar PN10 160mm 10 Bar Fittings PN16 16mm to 160mm 16 Bar Threaded Fittings 3/8″ to 2″ 16 Bar

Metric sizes

The pressure ratings for PVC-C pipes according to DIN 8079 and PVC-C fittings according to DIN 8063 are defined by the ‘nominal pressure’ method, whereby pipes, fittings and valves are grouped together according to a single nominal pressure rating. The PN rating is the maximum permitted operational pressure in bars calculated at 20°C, for example PN6 indicates a maximum working pressure of 6 bars. According to this method the pressure ratings of metric sized PVC-C pipes and fittings according to the nominal pressure system is as follows:-


3

144

solvent cement welding of pvc-cMaking a solvent welded joint - joint preparation

2

1 Bring the pipes, fittings and solvent cements to the same temperature condition. Ensure that the items to be joined are clean and dry prior to use. Inspect the components for any signs of damage or irregularities. Do not use items that appear not to be correct.

Cut the pipe ends squarely using tool suitable for plastic pipe. A wheel-type cutter is ideal. If a saw is used, a mitre box is recommended to ensure a square cut. Power saws may be used with care.

6

5 Check the dry fit by entering the pipe into the fitting. The pipe should enter the socket of the fitting to between 1/3 to 3/4 of its depth. This is regarded as a good ″interference fit″. If the pipe bottoms in the fitting with little interference, extra solvent cement should be used during assembly.

Measure the insertion depth of the socket and mark it on the pipe end. This makes it possible to verify later that the pipe has completely ″bottomed out″ in the fitting.

4

3 Using a chamfering tool cut a 10° to 15° chamfer on the outside of the pipe. This will help ease the pipe into the fitting and minimise the risk of cement being wiped from the fitting during assembly.

Remove the internal burr from the pipe, and clean up any cutting debris or swarf.

Removing the internal burr

Measuring the insertion depth

Marking the pipe end

Chamfering the pipe

7 Open cans of cleaner, primer and cement ready for use and loosely replace lids to minimise the evaporation of the solvents. Check that the products are in good condition and not ″gelled″. Cements that are gelled must not be used. Never thin cements.

8 If needed, remove dirt with C-65 cleaner applied using a clean, lint-free cloth or paper towel.

10

9 Using a natural bristle brush or an applicator, apply P70 primer to the inside of the fitting socket then to the outside of the pipe, then apply a further coat to the fitting socket. The primer should be worked into the surfaces of the material. Avoid ‘puddling’ the primer in the fitting socket. Do not apply with a rag.

While the primer is still wet, apply the solvent cement using a natural bristle brush of the correct diameter, or a correctly sized applicator. The solvent cement coating on the pipe end should be liberally yet evenly applied to a distance equal to the depth of the fitting socket. A medium even coat should be made on the fitting socket surface. For diameters 4″ (100mm) and above, or if the fit was loose, a second coat should be applied to the pipe.

12

11 While both surfaces are still wet, insert the pipe into the fitting until the pipe bottoms out fully in the socket. Check that alignment is correct. Hold the joint to prevent pull out for around 20 to 30 seconds (larger sizes may require more time). A bead of solvent cement should be evident around the pipe and fitting juncture. If the bead is not continuous it may indicate that insufficient solvent cement was applied. If this is the case the joint must be cut out, discarded and begun again with new product. Excess solvent cement should be removed from the mouth of the socket using a clean, dry cloth. Replace lids on cleaner, primer and cement cans to prevent the solvent from evaporating.

Handle the newly assembled joint with care until the initial set time has elapsed (see set and cure times table). Following the initial set period the assembly can be handled carefully, avoiding stresses on the joint. All solvent cemented joints must be allowed to cure fully prior to pressure testing.

Brush applying cement to the fitting

Brush applying cement to the pipe

Assembly

Wiping away excess cement

Applying the primer to the pipe


3

145

solvent cement welding of pvc-cSet and cure times

The initial set between the pipe and the fitting takes place in a matter of minutes, and joints can therefore safely be handled in a very short time. However, the joint needs to cure before it can be used as part of a pressurised assembly. The time taken to achieve this can depend upon a number of factors, including the tightness of fit as well as the ambient temperature and humidity. In general terms, joints will cure faster on tighter fitting assemblies in warmer, drier conditions, whereas looser fit joints made in cooler and/or humid conditions will cure slower.

As a general guide it is recommended that (wherever possible) joints be left for 24 hours to cure before pressure is applied. However, where this is not possible, consideration may be given to the above factors before determining when joints are put into service. Given average conditions and a working temperature not exceeding 20°C, a safe guide is to allow a cure time of not less than 1 hour for each bar of working pressure for pipe sizes up to 4″ (100mm), and 11/2 hours for each bar of working pressure for larger sizes.

Large diameter jointing

Solvent cement jointing on pipe sizes 6″ (DN 150mm) and larger is a two-person operation. To ensure that primers and solvent cements are applied at the correct speed they should be simultaneously applied to both pipe and fitting. Applying a thorough coating of cement is critical at these sizes both to ensure a good weld and to ease the pipe into the fitting.

For sizes 10″ and larger it is recommended to use a ratchet driven pipe puller to ensure that the pipe fully penetrates the fitting. These tools may be hired if required.

Solvent welding of dissimilar materials

As a general guide, solvent welded joints between dissimilar materials are not recommended. Where possible, a mechanical transition joint should be used, such as a union, flange or threaded connection.

If a solvent welded joint is unavoidable, it may (depending upon the conditions) be possible to make a reliable joint provided that a suitable solvent cement is used:

Materials To Be Joined Recommended Solvent Cement

PVC-C to PVC-U Weld-On 724

PVC-C to ABS Weld-On 724

Please note that in all cases we recommend contact with our technical department who will be able to provide assistance with specific applications and on recommended jointing methods.


3

146

pipe inch sizes

Corzan Pipe Schedule 403 & 6 metre lengths. Threading not recommended.

Maximum MinimumSize Pressure (bar) Weight/m O.D. (mm) Wall (mm) Code Price/m

1/4 53 0.11 13.8 2.2 400-002C 8.413/8 42 0.22 17.2 2.3 400-003C 10.711/2 41 0.27 21.4 2.8 400-005C 6.503/4 33 0.36 26.5 2.9 400-007C 8.51

1 31 0.52 33.6 3.4 400-010C 12.57 11/4 25 0.71 42.2 3.6 400-012C 16.91 11/2 23 0.85 48.3 3.7 400-015C 20.30 2 20 1.13 60.3 3.9 400-020C 27.07 21/2 21 1.79 73.0 5.2 400-025C 42.70 3 18 2.34 88.9 5.5 400-030C 56.05 4 15 3.34 114.3 6.0 400-040C 74.79 6 12 5.88 168.3 7.1 400-060C 146.86 8 11 8.88 219.1 8.2 400-080C 252.1910 10 12.61 273.1 9.3 400-100C 430.9512 9 16.66 323.9 10.3 400-120C 570.1214 9 20.75 355.6 11.1 400-140C 896.7316 9 27.08 406.4 12.7 400-160C 1171.17

Please note that a transportation surcharge may be applied on pipe diameters 10″ or larger - please enquire for details.

Corzan Pipe Schedule 803 & 6 metre lengths.

Maximum MinimumSize Pressure (bar) Weight/m O.D. (mm) Wall (mm) Code Price/m

1/4 78 0.17 13.8 3.0 800-002C 9.773/8 63 0.23 17.2 3.2 800-003C 13.451/2 59 0.34 21.4 3.7 800-005C 7.533/4 48 0.45 26.5 3.9 800-007C 10.25

1 43 0.67 33.6 4.6 800-010C 15.08 11/4 36 0.92 42.2 4.9 800-012C 20.6711/2 32 1.12 48.3 5.1 800-015C 25.13 2 28 1.55 60.3 5.5 800-020C 34.81 21/2 29 2.36 73.0 7.0 800-025C 52.95 3 26 3.17 88.9 7.6 800-030C 71.11 4 22 4.63 114.3 8.6 800-040C 102.42 6 19 8.84 168.3 11.0 800-060C 202.92 8 17 13.49 219.1 12.7 800-080C 353.67 10 16 20.02 273.1 15.1 800-100C 640.66 12 16 27.52 323.9 17.5 800-120C 880.30 14 15 33.13 355.6 19.1 800-140C 1173.08 16 15 42.60 406.4 21.4 800-160C 1834.02 18 15 55.79 457.2 23.8 800-180C 2187.66

Please note that a transportation surcharge may be applied on pipe diameters 10″ or larger - please enquire for details.

A range of flame retardent duct pipe and fittings is available to meet the requirements of FM4910. Please enquire for details.

FM4910 Corzan Ducti


3

147

accessories

Pipework Support

Temperature De-Rating Factors

How much Solvent Cement?

PVC-C pipework requires more support than for metallic systems. As working temperature increases, the distance between supports is reduced. For temperatures in excess of 80˚C, please enquire.

20 1.00 30 0.92 40 0.81 50 0.65 60 0.50 70 0.40 80* 0.26 90* 0.21

Working Pressure Temperature (˚C) De-Rating Factor

Pressure ratings for Harvel PVC-C pipework systems are always quoted at 20˚C. As working temperature increases, the maximum working pressure decreases by the factor indicated.

Estimate the number of joints per size, then use this table to calculate how much solvent cement to order.We always recommend the use of Primer when solvent welding PVC-C. Primer is brush applied after preparation and cleaning of the joint surfaces, prior to the application of solvent cement.

1/2 1.5 1.4 1.2 0.7 3/4 1.5 1.5 1.2 0.7 1 1.7 1.7 1.4 0.7 11/4 1.7 1.7 1.5 0.9 11/2 1.8 1.8 1.5 0.9 2 1.8 1.8 1.5 0.9 21/2 2.1 2.1 1.8 1.0 3 2.1 2.1 1.8 1.0 4 2.3 2.3 2.0 1.2 6 2.6 2.5 2.1 1.4 8 2.9 2.8 2.3 1.510 3.2 3.0 2.5 1.712 3.5 3.2 2.6 1.8

Support Centres/m Pipe Size 20˚C 40˚C 60˚C 80˚C

SCHEDULE 40

1/2 1.7 1.5 1.4 0.7 3/4 1.7 1.7 1.4 0.7 1 1.8 1.8 1.5 0.9 11/4 2.0 1.8 1.7 0.9 11/2 2.1 2.0 1.7 1.0 2 2.1 2.1 1.8 1.0 21/2 2.5 2.3 2.0 1.2 3 2.5 2.5 2.1 1.2 4 2.7 2.7 2.3 1.4 6 3.1 2.9 2.5 1.5 8 3.4 3.2 2.7 1.710 3.5 3.4 2.9 1.812 3.8 3.7 3.2 2.0

Support Centres/m Pipe Size 20˚C 40˚C 60˚C 80˚C

SCHEDULE 80

* For continuous use at these temperatures, consult our CustomerServices Department.

PVC-C Solvent Cement

500ml tin 724-301 27.20Size Code Price

P-70 Primer

Pint (473ml) tin 770-300 21.12 Quart (946ml) tin 770-200 33.90

Size Code Price

BrushesSize Code Price

What size Brush?It is important to use the correct size brush to apply solvent cement.

1/4-1 8mm round 11/4-2 25 x 3mm flat 21/2-5 50 x 10mm flat

6-12 75 x 10mm flat

Pipe Size Brush Size

Cleaning Fluid

1/2 litre tin 765-300 11.57Size Code Price

Allow approximately one half the cement quantity in C-65 cleaner and P-70 primer.

Detailed jointing instructions are available on request. Applicators and Accessories

Special applicators make large size jointing much easier

3″ long roller for pipe sizes 3″ to 6″. 3020 17.21Fits quart size tin.

7″ long roller for pipe sizes 6″+. 7020 21.09Fits gallon size tin

Swab applicator for pipe sizes 6″+. 4020 21.09Fits gallon size tin.

Empty gallon size tin for use with MT648 20.11applicators.

Description Code Price

All WELD-ONcements, primers and

cleaning fluids are nowLOW VOC

1/4 - 1/2 10-20 1603/4 - 1 25-30 120

11/4 - 2 40-63 80 21/2 - 3 75-90 60

4 110 405-6 140-160 24

8 - 12 10 - 4 12 - 2

inch dia mm dia joints per litre 4mm round L151/4R 1.518mm round L151/8R 2.12

25 x 10mm flat 565/1 2.34 50 x 10mm flat 565/2 5.36 75 x 10mm flat 565/3 14.10


3

148

plain fittings inch sizes

Tee 90˚1/4 801- 002C 7.25 3/8 801- 003C 7.46 1/2 801- 005C 7.74 3/4 801- 007C 8.30 1 801- 010C 10.63

11/4 801- 012C 21.08 11/2 801- 015C 24.95

2 801- 020C 33.14 21/2 801- 025C 70.55

3 801- 030C 76.14 4 801- 040C 102.99 6 801- 060C 281.18 8 801- 080C 736.32

10 801- 100C* 1534.4712 801- 120C* 2351.9614 801- 140CF* 7442.3816 801- 160CF* 10631.11

Size Code Price

Tee 45˚ (Wye)1/2 875- 005C 8.893/4 875- 007C 9.651 875- 010C 16.35

11/4 875- 012C 24.95 11/2 875- 015C 27.83

2 875- 020C 74.223 875- 030C* 293.764 875- 040C* 322.746 875- 060C* 483.15 8 875- 080C* 864.34

10 875- 100CF* 2305.5812 875- 120CF* 3289.2714 875- 140CF* 11939.4816 875- 160CF* 13410.20

Size Code Price

Reducing Tee 90˚

3/4 x 1/2 801- 101C 16.83 1 x 1/2 801- 130C 19.35 1 x 3/4 801- 131C 19.50 11/4 x 1 x 1 801- 158C 24.73 11/4 x 1x 11/4 801- 159C 24.95

11/4 x 1/2 801- 166C 54.8611/4 x 3/4 801- 167C 54.86

11/4 x 1 801- 168C 37.29 11/2 x 11/4 x 1 801- 202C 38.86

11/2 x 1/2 801- 209C 54.30 11/2 x 3/4 801- 210C 40.18 11/2 x 1 801- 211C 39.83

11/2 x 11/4 801- 212C 48.922 x 1/2 801- 247C 47.932 x 3/4 801- 248C 48.122 x 1 801- 249C 47.52

2 x 11/4 801- 250C 80.582 x 11/2 801- 251C 49.09

21/2 x 1/2 801- 287C 75.18 21/2 x 3/4 801- 288C 75.18

21/2 x 1 801- 289C 56.62 21/2 x 11/4 801- 290C 57.21 21/2 x 11/2 801- 291C 58.19

21/2 x 2 801- 292C 60.123 x 1/2 801- 333C 146.863 x 3/4 801- 334C 146.863 x 1 801- 335C 118.65

3 x 11/4 801- 336C 142.253 x 11/2 801- 337C 118.65

3 x 2 801- 338C 100.703 x 21/2 801- 339C 102.834 x 1/2 801- 415C 180.294 x 3/4 801- 416C 180.294 x 1 801- 417C 180.29

4 x 11/4 801- 418C 180.294 x 11/2 801- 419C 180.29

4 x 2 801- 420C 129.114 x 3 801- 422C 133.926 x 1 801- 525C 516.01

6 x 11/4 801- 526C 516.016 x 21/2 801- 527C 516.01

6 x 2 801- 528C 382.646 x 3 801- 530C 395.206 x 4 801- 532C 353.678 x 2 801- 578C 706.368 x 3 801- 580C 710.21 8 x 4 801- 582C 765.318 x 6 801- 585C 637.74

10 x 2 801- 621CF* 804.9310 x 3 801- 623C* 1171.17 10 x 4 801- 624C* 1176.95 10 x 6 801- 626C* 1776.0510 x 8 801- 628C* 1745.1212 x 2 801- 661CF* 1354.7412 x 3 801- 663CF* 1491.9612 x 4 801- 664CF* 1553.78 12 x 6 801- 666C* 1977.0512 x 8 801- 668C* 2765.54

12 x 10 801- 670C* 2535.56

Street Tee 90˚1/2 844- 005C 9.37 3/4 844- 007C 9.85 1 844- 010C 12.57

11/4 844- 012C 25.32 11/2 844- 015C 29.55

2 844- 020C 34.39

Size Code Price Double Wye2 876- 020CF 559.48

3 876- 030CF 713.12 3 x 2 876- 338C 429.04

4 876- 040CF 1223.336 876- 060CF 2131.65 8 876- 080CF 3822.62

10 876- 100CF 4147.3212 876- 120CF 6215.17

Maximum pressure 6 bar

Size Code Price

Reducing Tee 45˚ (Wye) Size Code Price

4x2 875- 420C* 380.736x4 875- 532C* 373.018x2 875- 578C* 930.558x3 875- 580C* 970.178x4 875- 582C* 1141.948x6 875- 585C* 1000.83

10x2 875- 621CF* 968.24 10x3 875- 623CF* 1008.82 10x4 875- 624CF* 1387.60 10x6 875- 626CF* 1586.66 10x8 875- 628CF* 1892.00 12x2 875- 661CF* 1888.77 12x3 875- 663CF* 1984.34 12x4 875- 664CF* 2263.55 12x6 875- 666CF* 2354.71 12x8 875- 668CF* 2367.40 12x10 875- 670CF* 2916.27

Size Code Price


3

149


Elbow 90˚

1/4 806- 002C 7.83 3/8 806- 003C 7.93 1/2 806- 005C 3.58 3/4 806- 007C 4.65

1 806- 010C 7.35 11/4 806- 012C 15.38 11/2 806- 015C 18.35

2 806- 020C 21.82 21/2 806- 025C 47.93

3 806- 030C 56.62 4 806- 040C 101.86 6 806- 060C 225.14 8 806- 080C 515.04

10 806- 100C* 1381.78 12 806- 120C* 1907.4614 806- 140CF* 7086.7916 806- 160CF* 9674.51

1/4 817- 002C 11.52 3/8 817- 003C 11.60 1/2 817- 005C 4.06 3/4 817- 007C 5.89

1 817- 010C 9.37 11/4 817- 012C 17.89 11/2 817- 015C 20.30

2 817- 020C 22.42 21/2 817- 025C 44.47

3 817- 030C 57.39 4 817- 040C 83.70 6 817- 060C 247.37 8 817- 080C 505.39

10 817- 100C* 1053.27 12 817- 120C* 1843.6814 817- 140C* 2775.9916 817- 160CF* 5152.27

Elbow 45˚

Reducing Cross

Size Code Price4x2 820- 420CF 346.906x2 820- 528CF 795.28 6x3 820- 530CF 901.546x4 820- 532CF 930.558x2 820- 578CF 1028.138x3 820- 580CF 1109.298x4 820- 582CF 1053.278x6 820- 585CF 1383.73

10x2 820- 621CF 1277.44 10x3 820- 623CF 1391.46 10x4 820- 624CF 1461.03 10x6 820- 626CF 1747.05 10x8 820- 628CF 2102.63 12x2 820- 661CF 1609.84 12x3 820- 663CF 1806.96 12x4 820- 664CF 1926.79 12x6 820- 666CF 2172.23 12x8 820- 668CF 2529.75 12x10 820- 670CF 3124.98

Cross1/4 820- 002C 30.171/2 820- 005C 31.083/4 820- 007C 32.84

1 820- 010C 37.68 11/4 820- 012C 41.36 11/2 820- 015C 45.82

2 820- 020C 61.66 21/2 820- 025C 83.51

3 820- 030C 109.384 820- 040C 194.236 820- 060CF* 915.068 820- 080CF* 1725.81

10 820- 100CF* 2578.0412 820- 120CF* 3952.1614 820- 140CF* 10878.5116 820- 160CF* 12965.68

Street Elbow 45˚ Size Code Price

1/2 827- 005C 4.06 3/4 827- 007C 5.89

1 827- 010C 9.37 11/4 827- 012C 17.89 11/2 827- 015C 20.30

2 827- 020C 22.423 827- 030C 51.984 827- 040C 81.546 827- 060C 245.448 827- 080C 502.48

10 827- 100C* 1298.6812 827- 120C* 2282.3714 827- 140CF* 5047.9216 827- 160CF* 6456.77

Short Radius Bend 90˚ Size Code Price

1/2 806- 005SC 6.35 3/4 806- 007SC 8.30

1 806- 010SC 13.32 11/4 806- 012SC 17.89 11/2 806- 015SC 19.71

2 806- 020SC 25.13

Street Elbow 90˚

1/2 809- 005C 4.24 3/4 809- 007C 5.51 1 809- 010C 8.80

11/4 809- 012C 18.19 11/2 809- 015C 20.87

2 809- 020C 25.913 809- 030C 75.384 809- 040C 140.896 809- 060C 297.598 809- 080C 682.21

10 809- 100C 2158.7112 809- 120C 2966.52

Size Code Price

Items marked * carry a maximum pressure rating of 10 bar at 20˚C.

Pressure Ratingsi

Size Code Price

Size Code Price

Size Code Price


3

150


Elbow 111/4˚ Size Code Price

2 811- 020C 27.833 811- 030C 73.074 811- 040C 100.266 811- 060CF 365.968 811- 080CF 619.40

10 811- 100CF 1026.2112 811- 120CF 1374.0614 811- 140CF* 3262.1916 811- 160CF* 4591.82

Elbow 15˚ Size Code Price

2 818- 020CF 117.153 818- 030CF 146.014 818- 040CF 190.686 818- 060CF 365.968 818- 080CF 616.50

10 818- 100CF 1031.9912 818- 120CF 1374.0614 818- 140CF* 3262.1916 818- 160CF* 4591.82

Street Elbow 221/2˚ Size Code Price

1/2 842- 005C 6.563/4 842- 007C 10.13

1 842- 010C 15.87 11/4 842- 012C 19.89 11/2 842- 015C 28.60

2 842- 020C 36.13

Elbow 221/2˚ Size Code Price

1/2 816- 005C 5.713/4 816- 007C 8.30

1 816- 010C 13.14 11/4 816- 012C 25.70 11/2 816- 015C 26.49

2 816- 020C 28.603 816- 030C 74.414 816- 040C 104.386 816- 060C 320.828 816- 080C 657.08

10 816- 100CF 1088.0212 816- 120CF 1455.2214 816- 140CF* 3262.1916 816- 160CF* 4591.82


2 815- 020CF 99.953 815- 030CF 146.014 815- 040CF 190.686 815- 060C 308.978 815- 080CF 678.33

10 815- 100CF 1117.0412 815- 120CF 1432.0414 815- 140CF 3262.1916 815- 160CF 4591.82

Socket

Reducing SocketConcentric 3/4 x 1/2 829- 101C 8.67

1 x 1/2 829- 130C 12.46 1 x 3/4 829- 131C 12.46 11/4 x 1/2 829- 166C 27.83 11/4 x 3/4 829- 167C 27.83 11/4 x 1 829- 168C 28.05 11/2 x 1/2 829- 209C 28.05 11/2 x 3/4 829- 210C 28.05 11/2 x 1 829- 211C 28.05 11/2 x 11/4 829- 212C 28.05

2 x 1/2 829- 247C 37.29 2 x 3/4 829- 248C 37.292 x 1 829- 249C 37.11

2 x 11/4 829- 250C 37.11 2 x 11/2 829- 251C 37.11 21/2 x 11/2 829- 291C 49.84 21/2 x 2 829- 292C 49.84 3 x 1 829- 335C 132.01 3 x 11/4 829- 336C 136.04 3 x 11/2 829- 337C 136.04

3 x 2 829- 338C 85.61 3 x 21/2 829- 339CF 194.90 4 x 3/4 829- 416C 155.58 4 x 1 829- 417C 155.58 4 x 11/2 829- 419C 155.58

4 x 2 829- 420C 104.744 x 3 829- 422C 105.165 x 4 829- 490CF* 127.946 x 2 829- 528CF* 248.346 x 3 829- 530C 314.83 6 x 4 829- 532C 241.578 x 4 829- 582CF* 445.458 x 6 829- 585C 422.28

10 x 4 829- 624CF* 757.5810 x 6 829- 626CF* 590.4210 x 8 829- 628CF* 932.6812 x 4 829- 664CF* 1837.6212 x 6 829- 666CF* 1536.4212 x 8 829- 668CF* 1186.61

12 x 10 829- 670CF* 668.68

1/4 829- 002C 8.23 3/8 829- 003C 8.411/2 829- 005C 3.663/4 829- 007C 5.101 829- 010C 6.77

11/4 829- 012C 10.42 11/2 829- 015C 13.32

2 829- 020C 15.16 21/2 829- 025C 33.62

3 829- 030C 37.114 829- 040C 51.636 829- 060C 120.588 829- 080C 308.25

10 829- 100C 440.61 12 829- 120C 546.9214 829- 140C 652.2716 829- 160CF 3988.85

Size Code Price

Size Code Price

Items marked * carry a maximum pressure rating of 10 bar at 20˚C.

Pressure RatingsiIPS Flow Systems l Seaham Grange Industrial Estate l Seaham l Co Durham l SR7 0PT l Tel: 0191 521 3111 l www.ipsflowsystems.com

3

151


Reducing Bush

3/8 x 1/4 837- 052C 6.701/2 x 1/4 837- 072C 6.771/2 x 3/8 837- 073C 6.773/4 x 1/2 837- 101C 3.58

1 x 1/2 837- 130C 5.61 1 x 3/4 837- 131C 5.51 11/4 x 1/2 837- 166C 14.58 11/4 x 3/4 837- 167C 14.68 11/4 x 1 837- 168C 14.32 11/2 x 1/2 837- 209C 16.63 11/2 x 3/4 837- 210C 16.91 11/2 x 1 837- 211C 16.63 11/2 x 11/4 837- 212C 16.14

2 x 1/2 837- 247C 21.662 x 3/4 837- 248C 22.032 x 1 837- 249C 21.82

2 x 11/4 837- 250C 21.82 2 x 11/2 837- 251C 21.46 21/2 x 11/4 837- 290C 25.91 21/2 x 11/2 837- 291C 25.91 21/2 x 2 837- 292C 26.49

3 x 1 837- 335C 41.95 3 x 11/4 837- 336C 41.95 3 x 11/2 837- 337C 41.75

3 x 2 837- 338C 41.753 x 21/2 837- 339C 40.04

4 x 2 837- 420C 48.714 x 3 837- 422C 46.946 x 2 837- 528C 110.34 6 x 3 837- 530C 108.826 x 4 837- 532C 107.448 x 6 837- 585C 328.56

10 x 6 837- 626C 642.6010 x 8 837- 628C 642.6012 x 4 837- 664C 1393.4012 x 8 837- 668C 810.16

12 x 10 837- 670CF 810.1614 x 12 837- 702CF 1602.1016 x 12 837- 762CF 2340.3816 x 14 837- 764CF 2228.26

Reducing SocketEccentric

Size Code Price3x2 829- 338CFE 102.424x2 829- 420CFE 229.014x3 829- 422CFE 148.236x2 829- 528CFE 462.856x3 829- 530CFE 370.106x4 829- 532CFE 276.378x4 829- 582CFE 692.828x6 829- 585CFE 600.09

10x4 829- 624CFE 1524.80 10x6 829- 626CFE 1238.78 10x8 829- 628CFE 891.90 12x6 829- 666CFE 1747.05 12x8 829- 668CFE 1642.70 12x10 829- 670CFE 1461.03

UnionFPM O-Ring Size Code Price

1/4 857- 002C 20.87 3/8 857- 003C 14.51 1/2 8057- 005C 14.51 3/4 8057- 007C 15.93

1 8057- 010C 19.50 11/4 8057- 012C 37.68 11/2 8057- 015C 39.04

2 8057- 020C 64.35 21/2 8057- 025C 104.94

3 8057- 030C 135.87 4 8057- 040C 179.166 8057- 060C 401.98

UnionEPDM O-Ring Size Code Price

1/4 897- 002C 20.87 3/8 897- 003C 20.87 1/2 8097- 005C 14.51 3/4 8097- 007C 15.73

1 8097- 010C 19.24 11/4 8097- 012C 37.29 11/2 8097- 015C 38.65

2 8097- 020C 63.59 21/2 8097- 025C 104.74

3 8097- 030C 134.31 4 8097- 040C 177.426 8097- 060C 405.85

Our expert team are here to help.Call our freephone:

Need advice?

0800 975 79 71Or from outside of the UK:+44 191 521 3111

AdaptorUnionFPM O-Ring Inch x mm

Size Code Price1/2 x 20 8657-020C 17.13 3/4 x 25 8657-025C 17.76 1 x 32 8657-032C 21.48

11/4 x 40 8657-040C 43.65 11/2 x 50 8657-050C 44.44

2 x 63 8657-063C 73.67 3 x 90 8657-090C 137.57

4 x 110 8657-110C 227.35

Adaptor UnionEPDM O-Ring Inch x mm Size Code Price

1/2 x 20 8697-020C 15.12 3/4 x 25 8697-025C 16.51 1 x 32 8697-032C 21.27

11/4 x 40 8697-040C 43.90 11/2 x 50 8697-050C 45.42

2 x 63 8697-063C 72.75 3 x 90 8697-090C 87.82

4 x 110 8697-110C 104.96

Size Code Price


3

152


Cap1/4 847- 002C 5.51 3/8 847- 003C 5.61 1/2 847- 005C 5.10 3/4 847- 007C 7.35 1 847- 010C 12.95

11/4 847- 012C 14.58 11/2 847- 015C 14.58

2 847- 020C 16.71 21/2 847- 025C 51.41

3 847- 030C 58.37 4 847- 040C 63.38 6 847- 060C 199.04 8 847- 080C 576.87

10 847- 100CF* 921.86 12 847- 120CF* 1020.4014 847- 140CF* 3617.8116 847- 160CF* 5320.38

Wrench SetsBody Wrench and NutWrench for TankAdaptor

1/4 TAW- 002 22.323/8 TAW- 003 22.321/2 TAW- 005 22.533/4 TAW- 007 23.151 TAW- 010 24.16

11/4 TAW- 012 27.20 11/2 TAW- 015 30.19

2 TAW- 020 34.503 TAW- 030 42.434 TAW- 040 46.28

Tank AdaptorPlain Socket x PlainSocketFPM Gasket

1/4 8170V- 002C 67.243/8 8170V- 003C 67.24 1/2 8170V- 005C 67.643/4 8170V- 007C 77.881 8170V- 010C 90.43

11/4 8170V- 012C 110.94 11/2 8170V- 015C 117.90

2 8170V- 020C 117.423 8170V- 030C 306.344 8170V- 040C 667.726 8170V- 060C 1569.198 8170V- 080C 3911.57

Tank AdaptorPlain Socket x PlainSocketEPDM Gasket

1/4 8170E- 002C 51.413/8 8170E- 003C 51.41 1/2 8170E- 005C 51.783/4 8170E- 007C 58.191 8170E- 010C 68.04

11/4 8170E- 012C 85.82 11/2 8170E- 015C 92.20

2 8170E- 020C 132.013 8170E- 030C 310.974 8170E- 040C 516.26 6 8170E- 060C 934.02 8 8170E- 080C 2214.74

Elastomer ExpansionJointEPDM Bellows

3/4 EJ22-007C 257.05 1 EJ22-010C 292.79 11/4 EJ22-012C 319.85 11/2 EJ22-015C 392.31 2 EJ22-020C 488.93 21/2 EJ22-025C 714.08 3 EJ22-030C 970.17

Expansion orRepair JointSolvent Socket Joints -150mm or 300mm Travel

1/2 826-005X6C 379.753/4 826-007X6C 416.47

1 826-010X6C 451.26 11/4 826-012X6C 687.99 11/2 826-015X6C 519.88 2 826-020X6C 659.99 21/2 826-025X6C 1118.97 3 826-030X6C 912.18 4 826-040X6C 1578.93 6 826-060X6C 1501.62 8 826-080X6C 2883.16 10 826-100X6C 3722.16

Size Code Price

1/2 826-005X12C 388.453/4 826-007X12C 446.45

1 826-010X12C 477.35 11/4 826-012X12C 753.71 11/2 826-015X12C 602.98 2 826-020X12C 772.08 21/2 826-025X12C 1155.67 3 826-030X12C 944.07 4 826-040X12C 1559.60 6 826-060X12C 1779.91 8 826-080X12C 3385.91 10 826-100X12C 4083.54

Size Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price

FPM Seals6″ (150mm) travel

FPM Seals12″ (300mm) travel


3

153

adaptor fittings inch sizes

Tee 90˚Plain x NPT femalethread 1/4 802- 002C 21.66

1/2 802- 005C 21.66 3/4 802- 007C 24.95 1 802- 010C 31.512 802- 020C 48.30

Size Code Price

Tee 90˚Plain x NPT femalethread ST/ST reinforced 1/2 802- 005CSR 17.39

1/2 x 1/4 802- 072CSR 17.21 3/4 x 1/4 802- 098CSR 23.00 3/4 x 1/2 802- 101CSR 23.22 1 x 1/4 802- 128CSR 46.59 11/4 x 1/4 802- 164CSR 62.03 11/4 x 1/2 802- 166CSR 49.09 11/2 x 1/4 802- 207CSR 88.68 11/2 x 1 802- 211CSR 58.95 2 x 1/4 802- 245CSR 101.86 3 x 1/4 802- 331CSR 195.18 4 x 1/4 802- 413CSR 211.64

Tee 90˚Plain x metal NPTfemale thread 1/2 802- 005CBR 36.32

3/4 802- 007CBR 70.94 3/4 x 1/2 802- 101CBR 44.47

Elbow 90˚Plain x NPT femalethread 1/4 807- 002C 6.97

3/8 807- 003C 7.051/2 807- 005C 8.62 3/4 807- 007C 10.25 1 807- 010C 13.62

11/4 807- 012C 20.30 11/2 807- 015C 29.76

2 807- 020C 38.86

Elbow 90˚Plain x metal NPTfemale thread 1/2 807- 005CBR 31.51

3/4 807- 007CBR 54.86 3/4 x 1/2 807- 101CBR 39.42

Threaded Schedule 80 fittings are de-rated to 50% of the normal working pressure, except for female brass or stainless steel threaded fittings which carry the full Schedule 80 pressure rating.

Threaded Fittings

SocketPlain x NPT femalethread 1/4 835- 002C 10.42

3/8 835- 003C 10.54 1/2 835- 005C 5.51 3/4 835- 007C 6.00

1 835- 010C 13.32 11/4 835- 012C 14.22 11/2 835- 015C 16.71

2 835- 020C 28.25 21/2 835- 025C 53.74

3 835- 030C 107.05 4 835- 040C 177.426 835- 060C 315.978 835- 080C 498.62

SocketPlain x NPT femalethread ST/ST reinforced 1/4 835- 002CSR 11.31

3/8 835- 003CSR 11.40 1/2 835- 005CSR 5.10

1/2 x 3/4 835- 074CSR 5.61 3/4 x 1/2 835- 101CSR 5.61

3/4 835- 007CSR 5.61 3/4 x 1 835- 102CSR 12.36

1 835- 010CSR 12.36 1x1/2 835- 130CSR 12.36 1x3/4 835- 131CSR 12.36 11/4 835- 012CSR 13.05 11/2 835- 015CSR 15.38

2 835- 020CSR 22.03 21/2 835- 025CSR 49.68

3 835- 030CSR 99.94 4 835- 040CSR 164.646 835- 060CSR 298.58

Size Code Price

SocketPlain x metal NPT femalethread 1/2 835- 005CBR 19.71

3/4 835- 007CBR 40.18 3/4 x 1/2 835- 101CBR 28.25

1 835- 010CBR 70.36 11/4 835- 012CBR 150.54 11/2 835- 015CBR 199.04

2 835- 020CBR 248.34

i

Size Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price


3

154


Reducing BushSpigot x NPT femalethread 3/8 x 1/4 838- 052C 7.15

1/2 x 1/8 838- 071C 7.25 1/2 x 1/4 838- 072C 7.25 1/2 x 3/8 838- 073C 7.25 3/4 x 1/4 838- 098C 8.23 3/4 x 1/2 838- 101C 3.86 1 x 3/8 838- 129C 10.92 1 x 1/2 838- 130C 5.10 1 x 3/4 838- 131C 5.03 11/4 x 1/2 838- 166C 15.73 11/4 x 3/4 838- 167C 15.73 11/4 x 1 838- 168C 15.56 11/2 x 1/2 838- 209C 19.71 11/2 x 3/4 838- 210C 19.50 11/2 x 1 838- 211C 19.50 11/2 x 11/4 838- 212C 19.04 2 x 1/2 838- 247C 27.24 2 x 3/4 838- 248C 27.24

2 x 1 838- 249C 27.24 2 x 11/4 838- 250C 27.07 2 x 11/2 838- 251C 26.66 21/2 x 1/2 838- 287C 43.48 21/2 x 3/4 838- 288C 43.69 21/2 x 1 838- 289C 43.48 21/2 x 11/4 838- 290C 43.48 21/2 x 11/2 838- 291C 43.48 21/2 x 2 838- 292C 42.34 3 x 3/4 838- 334C 111.51

3 x 1 838- 335C 110.94 3 x 11/4 838- 336C 98.00 3 x 11/2 838- 337C 97.80

3 x 2 838- 338C 93.94 3 x 21/2 838- 339C 93.54

4 x 2 838- 420C 188.83 4 x 21/2 838- 421C 189.97

4 x 3 838- 422C 188.436 x 3 838- 530C 387.466 x 4 838- 532C 386.54

UnionPlain x metal NPT femalethread FPM O-Ring

UnionPlain x NPT femalethread ST/ST reinforcedFPM O-Ring

1/4 859- 002CSR 22.22 3/8 859- 003CSR 22.03 1/2 8059- 005CSR 14.40 3/4 8059- 007CSR 25.13 1 8059- 010CSR 34.81

11/4 8059- 012CSR 65.51 11/2 8059- 015CSR 71.89

2 8059- 020CSR 76.35 21/2 8059- 025CSR 112.41

3 8059- 030CSR 213.55 4 8059- 040CSR 254.12

UnionPlain x NPT femalethread ST/ST reinforcedEPDM O-Ring

1/4 899- 002CSR 21.82 3/8 899- 003CSR 21.46 1/2 8099- 005CSR 14.02 3/4 8099- 007CSR 24.16 1 8099- 010CSR 33.82

11/4 8099- 012CSR 64.75 11/2 8099- 015CSR 70.94

2 8099- 020CSR 75.18 21/2 8099- 025CSR 98.97

3 8099- 030CSR 160.21 4 8099- 040CSR 361.40

UnionPlain x NPT femalethread EPDM O-Ring 1/2 8099- 005C 15.87

3/4 8099- 007C 28.05 1 8099- 010C 38.65

11/4 8099- 012C 72.65 11/2 8099- 015C 73.24

2 8099- 020C 85.24 21/2 8099- 025C 138.37

3 8099- 030C 167.18 4 8099- 040C 200.96

AdaptorPlain Spigot x NPTfemale threadST/ST reinforced

1/2x1/4 878- 072CSR 14.79 1/2 878- 005CSR 5.39 3/4 878- 007CSR 5.80 1 878- 010CSR 12.75

1x1/4 878- 128CSR 17.30 11/4 878- 012CSR 13.45 11/2 878- 015CSR 15.73

2 878- 020CSR 22.03 3 878- 030CSR 100.88 4 878- 040CSR 168.33

AdaptorPlain Socket x NPT malethread 1/2 836- 005C 4.37

3/4 836- 007C 5.39 1 836- 010C 9.08

11/4 836- 012C 13.32 11/2 836- 015C 17.97

2 836- 020C 24.36 21/2 836- 025C 65.13

3 836- 030C 87.75 4 836- 040C 149.016 836- 060CF 341.09

Size Code PriceUnionPlain x NPT femalethread FPM O-Ring 1/2 8059- 005C 16.20

3/4 8059- 007C 28.60 1 8059- 010C 39.63

11/4 8059- 012C 73.84 11/2 8059- 015C 74.61

2 8059- 020C 86.38 21/2 8059- 025C 139.90

3 8059- 030C 169.29 4 8059- 040C 203.88

Size Code Price

Size Code Price

Size Code Price

Size Code Price

1 859- 010CBR 99.72 11/4 859- 012CBR 166.22 11/2 859- 015CBR 188.22

2 859- 020CBR 216.47

1 899- 010CBR 98.55 11/4 899- 012CBR 164.28 11/2 899- 015CBR 185.64

2 899- 020CBR 212.57

EPDM O-Ring

Size Code Price

Size Code Price

Size Code Price


3

155


NippleSpigot x NPT malethread 1/4 880-1- 015C 2.61

3/8 881-1- 015C 3.10 1/2 882-1- 020C 3.36 3/4 883-1- 020C 4.17 1 884-1- 030C 6.00

11/4 885-1- 035C 9.65 11/2 886-1- 035C 10.42

2 887-1- 040C 13.91 21/2 888-1- 050C 28.40

3 889-1- 050C 35.37 4 890-1- 060C 57.78

Size Code Price

Reducing BushSpigot x NPT femalethread ST/ST reinforced

1 x 1/4 838-128CSR 13.14 11/2 x 1/2 838-209CSR 23.22 11/2 x 3/4 838-210CSR 23.22

2 x 1/2 838-247CSR 32.09 2 x 3/4 838-248CSR 32.09 2 x 1 838-249CSR 32.09

3 x 3/4 838-334CSR 133.14 3 x 1 838-335CSR 133.14

3 x 11/4 838-336CSR 133.14 3 x 11/2 838-337CSR 133.14

Size Code PriceGrooved CouplingAdaptorGroove joint x pvc-cplain socket

11/4 833- 012C 15.28 11/2 833- 015C 19.89

2 833- 020C 26.28 21/2 833- 025C 43.28

3 833- 030C 53.74 4 833- 040C 92.38 6 833- 060C 138.77

Hose AdaptorHose spigot x NPT male

1/2 1436- 005C 3.423/4 1436- 007C 4.171 1436- 010C 4.25

11/4 1436- 012C 6.39 11/2 1436- 015C 7.60

2 1436- 020C 14.51

Hexagon NippleSpigot x NPT malethread

Size Code Price1/2 861- 005C 5.243/4 861- 007C 10.83

1 861- 010C 11.12 11/4 861- 012C 12.95 11/2 861- 015C 14.40

2 861- 020C 17.21

We recommend the use of PTFE tape or Blue 75 Joint Compound for all threaded joints on plastic piping. Please check with our technical department before using any other type of pipe joint compounds, as these can cause stress cracking and lead to failure of the system.

When using PTFE tape, follow the following guidelines:

- Always wrap tape clockwise- Apply 2 to 3 wraps- Tighten hand-tight plus 11/2 to 2 turns- Do not overtighten

Making Threaded Jointsi

PTFE TapeBS7786

12x12x0.075 767-120 1.10Roll Size mm Code Price

1 Pint 768-301 26.04 Size Code Price

Blue 75

Size Code Price

Size Code Price


3

156

saddles inch sizes

CPVC Clamp Saddle

2 x 1/2 866- 247C 49.292 x 3/4 866- 248C 49.292 x 1 866- 249C 49.29

2 x 11/4 866- 250C 49.29 2 x 11/2 866- 251C 49.29 21/2 x 11/2 866- 291C 66.68 3 x 1/2 866- 333C 66.68 3 x 3/4 866- 334C 66.68

3 x 1 866- 335C 66.68 3 x 11/4 866- 336C 66.68 3 x 11/2 866- 337C 66.68

3 x 2 866- 338C 66.68 4 x 1/2 866- 415C 81.18 4 x 3/4 866- 416C 81.18

4 x 1 866- 417C 81.18 4 x 11/4 866- 418C 81.18 4 x 11/2 866- 419C 81.18

4 x 2 866- 420C 81.18 4 x 21/2 866- 421C 95.66

4 x 3 866- 422C 103.40 6 x 1/2 866- 523C 139.14

6 x 3/4 866- 524C 139.146 x 1 866- 525C 139.14

6 x 11/4 866- 526C 139.14 6 x 11/2 866- 527C 139.14

6 x 2 866- 528C 139.14 6 x 21/2 866- 529C 158.89

6 x 3 866- 530C 166.976 x 4 866- 532C 180.48

8 x 1/2 866- 573C 319.85 8 x 3/4 866- 574C 319.85

8 x 1 866- 575C 319.85 8 x 11/4 866- 576C 319.85 8 x 11/2 866- 577C 319.85

8 x 2 866- 578C 317.92 8 x 21/2 866- 579C 345.93

8 x 3 866- 580C 359.478 x 4 866- 582C 374.928 x 6 866- 585C 417.42

10 x 4 866- 624C 499.5810 x 6 866- 626C 571.0712 x 4 866- 664C 629.0712 x 6 866- 666C 721.82

Plain socket outlet FPM O-RingZinc Plated Hardware

Plain socket outlet EPDM O-RingZinc Plated Hardware

866V- 247C 51.23866V- 248C 51.23866V- 249C 51.23866V- 250C 51.23866V- 251C 51.23866V- 291C 71.54866V- 333C 71.54866V- 334C 71.54 866V- 335C 71.54866V- 336C 71.54866V- 337C 71.54866V- 338C 71.54866V- 415C 86.98866V- 416C 86.98866V- 417C 86.98866V- 418C 86.98866V- 419C 86.98866V- 420C 86.98866V- 421C 100.49866V- 422C 106.28866V- 523C 144.93866V- 524C 144.93866V- 525C 144.93866V- 526C 150.73866V- 527C 150.73866V- 528C 150.73866V- 529C 169.09866V- 530C 176.85866V- 532C 190.34866V- 573C 332.40866V- 574C 332.40866V- 575C 332.40866V- 576C 331.43866V- 577C 331.43866V- 578C 330.49866V- 579C 360.43866V- 580C 373.96866V- 582C 399.06866V- 585C 433.86866V- 624C 519.88866V- 626C 594.28866V- 664C 654.17866V- 666C 692.82

Plain socket outlet EPDM O-RingStainless Steel Hardware

866S- 247C 74.41866S- 248C 74.41866S- 249C 74.41866S- 250C 74.41866S- 251C 74.41866S- 291C 100.49866S- 333C 100.49866S- 334C 100.49 866S- 335C 100.49866S- 336C 100.49866S- 337C 100.49866S- 338C 100.49866S- 415C 129.49866S- 416C 129.49866S- 417C 129.49866S- 418C 129.49866S- 419C 129.49866S- 420C 129.49866S- 421C 140.12866S- 422C 145.35866S- 523C 203.88866S- 524C 203.88866S- 525C 203.88866S- 526C 203.88866S- 527C 203.88866S- 528C 203.88866S- 529C 238.46866S- 530C 237.70866S- 532C 251.23866S- 573C 405.85866S- 574C 405.85866S- 575C 405.85866S- 576C 405.85866S- 577C 405.85866S- 578C 404.89866S- 579C 441.61866S- 580C 458.99866S- 582C 480.23866S- 585C 534.36866S- 624C 638.75866S- 626C 731.49866S- 664C 803.96866S- 666C 924.76

Plain socket outlet FPM O-RingStainless Steel Hardware

866SV- 247C 77.30866SV- 248C 77.30866SV- 249C 77.30866SV- 250C 77.30866SV- 251C 77.30866SV- 291C 103.40866SV- 333C 103.40866SV- 334C 103.40 866SV- 335C 103.40866SV- 336C 103.40866SV- 337C 103.40866SV- 338C 103.40866SV- 415C 134.31866SV- 416C 134.31866SV- 417C 134.31866SV- 418C 134.31866SV- 419C 134.31866SV- 420C 134.31866SV- 421C 148.82866SV- 422C 154.59866SV- 523C 215.50866SV- 524C 215.50866SV- 525C 215.50866SV- 526C 215.50866SV- 527C 215.50866SV- 528C 215.50866SV- 529C 234.79866SV- 530C 240.61866SV- 532C 258.00866SV- 573C 420.33866SV- 574C 420.33866SV- 575C 420.33866SV- 576C 420.33866SV- 577C 420.33866SV- 578C 418.41866SV- 579C 457.07866SV- 580C 475.42866SV- 582C 497.64866SV- 585C 553.70866SV- 624C 661.61866SV- 626C 757.58866SV- 664C 832.94866SV- 666C 958.57

Clamp Saddles are quick and easy to assemble. They provide a simple, low cost alternative to a Branch Tee. Ensure that the pipe is de-pressurised and drained prior to fitting.

Clamp Saddle Assemblyi

Size Code Price Code Price Code Price Code Price


3

157

saddles inch sizes

CPVC Clamp Saddle

2 x 1/2 867- 247CSR 51.02 2 x 3/4 867- 248CSR 51.02 2 x 1 867- 249CSR 51.02 2 x 11/4 867- 250CSR 51.02 2 x 11/2 867- 251CSR 51.02 21/2 x 11/2 867- 291CSR 71.11 3 x 1/2 867- 333CSR 71.11 3 x 3/4 867- 334CSR 71.11 3 x 1 867- 335CSR 71.11 3 x 11/4 867- 336CSR 71.11 3 x 11/2 867- 337CSR 71.11 3 x 2 867- 338CSR 71.11 4 x 1/2 867- 415CSR 90.84 4 x 3/4 867- 416CSR 90.84 4 x 1 867- 417CSR 90.84 4 x 11/4 867- 418CSR 90.84 4 x 11/2 867- 419CSR 90.84 4 x 2 867- 420CSR 90.84 4 x 21/2 867- 421CSR 106.28 4 x 3 867- 422CSR 117.11 6 x 1/2 867- 523CSR 150.73 6 x 3/4 867- 524CSR 150.73 6 x 1 867- 525CSR 150.73 6 x 11/4 867- 526CSR 150.73 6 x 11/2 867- 527CSR 150.73 6 x 2 867- 528CSR 150.73 6 x 21/2 867- 529CSR 169.66 6 x 3 867- 530CSR 176.05 6 x 4 867- 532CSR 195.18 8 x 1/2 867- 573CSR 336.28 8 x 3/4 867- 574CSR 336.28 8 x 1 867- 575CSR 336.28 8 x 11/4 867- 576CSR 336.28 8 x 11/2 867- 577CSR 336.28 8 x 2 867- 578CSR 335.31 8 x 21/2 867- 579CSR 364.28 8 x 3 867- 580CSR 381.68 8 x 4 867- 582CSR 399.06 10 x 4 867- 624CSR 484.09 10 x 6 867- 626CSR 552.71 12 x 4 867- 664CSR 609.71 12 x 6 867- 666CSR 699.58

NPT female threaded outlet FPM O-RingZinc Plated Hardware

NPT female threaded outlet EPDM O-RingZinc Plated Hardware

867V- 247CSR 58.95 867V- 248CSR 58.95 867V- 249CSR 58.95867V- 250CSR 58.95 867V- 251CSR 58.95 867V- 291CSR 83.12 867V- 333CSR 83.12 867V- 334CSR 83.12 867V- 335CSR 83.12 867V- 336CSR 83.12867V- 337CSR 83.12 867V- 338CSR 83.12 867V- 415CSR 104.38 867V- 416CSR 104.38 867V- 417CSR 104.38 867V- 418CSR 104.38 867V- 419CSR 104.38 867V- 420CSR 104.38 867V- 421CSR 118.28 867V- 422CSR 126.80 867V- 523CSR 172.98 867V- 524CSR 172.98867V- 525CSR 172.98 867V- 526CSR 172.98 867V- 527CSR 172.98 867V- 528CSR 172.98867V- 529CSR 196.16 867V- 530CSR 200.96 867V- 532CSR 218.37867V- 573CSR 366.24 867V- 574CSR 365.27 867V- 575CSR 366.24867V- 576CSR 365.27 867V- 577CSR 365.27 867V- 578CSR 364.28867V- 579CSR 397.15 867V- 580CSR 412.61 867V- 582CSR 432.93867V- 624CSR 524.69867V- 626CSR 600.09867V- 664CSR 659.99867V- 666CSR 758.55

NPT female threaded outlet EPDM O-RingStainless Steel Hardware

867S- 247CSR 85.43867S- 248CSR 85.43867S- 249CSR 85.43867S- 250CSR 85.43867S- 251CSR 85.43867S- 291CSR 115.97867S- 333CSR 115.97867S- 334CSR 115.97 867S- 335CSR 115.97867S- 336CSR 115.97867S- 337CSR 115.97867S- 338CSR 115.97867S- 415CSR 146.86867S- 416CSR 146.86867S- 417CSR 146.86867S- 418CSR 146.86867S- 419CSR 146.86867S- 420CSR 146.86867S- 421CSR 161.57867S- 422CSR 166.75867S- 523CSR 247.37867S- 524CSR 247.37867S- 525CSR 247.37867S- 526CSR 247.37867S- 527CSR 247.37867S- 528CSR 247.37867S- 529CSR 264.77867S- 530CSR 271.53867S- 532CSR 286.99867S- 573CSR 456.09867S- 574CSR 456.09867S- 575CSR 456.09867S- 576CSR 456.09867S- 577CSR 456.09867S- 578CSR 455.12867S- 579CSR 496.68867S- 580CSR 517.93867S- 582CSR 542.10867S- 624CSR 655.15867S- 626CSR 749.82867S- 664CSR 824.25867S- 666CSR 947.92

NPT female threaded outlet FPM O-RingStainless Steel Hardware

867SV- 247CSR 94.71867SV- 248CSR 94.71867SV- 249CSR 94.71867SV- 250CSR 94.71867SV- 251CSR 94.71867SV- 291CSR 127.55867SV- 333CSR 127.55867SV- 334CSR 127.55867SV- 335CSR 127.55867SV- 336CSR 127.55 867SV- 337CSR 127.55867SV- 338CSR 127.55867SV- 415CSR 162.31867SV- 416CSR 162.31867SV- 417CSR 162.31867SV- 418CSR 162.31867SV- 419CSR 162.31867SV- 420CSR 162.31867SV- 421CSR 176.43867SV- 422CSR 183.40867SV- 523CSR 274.41867SV- 524CSR 274.41867SV- 525CSR 274.41867SV- 526CSR 274.41 867SV- 527CSR 274.41867SV- 528CSR 274.41867SV- 529CSR 296.67867SV- 530CSR 305.34867SV- 532CSR 330.49867SV- 573CSR 492.80867SV- 574CSR 492.80867SV- 575CSR 492.80867SV- 576CSR 492.80867SV- 577CSR 491.84867SV- 578CSR 490.85867SV- 579CSR 536.28867SV- 580CSR 559.48867SV- 582CSR 586.57867SV- 624CSR 708.31867SV- 626CSR 810.73867SV- 664CSR 889.96867SV- 666CSR 1024.28

CPVC saddles are suitable for use at working pressures of up to 16 bar at 20˚C for sizes 2″ to 4″, 13.5 bar at 20˚C for size 6″, and 10 bar at 20˚C for sizes 8″ to 12″.

Pressure Ratingsi

Size Code Price Code Price Code Price Code Price


3

158

threaded fittings inch sizes

Tee 90˚NPT female threaded

1/4 805- 002C 15.87 3/8 805- 003C 15.93 1/2 805- 005C 16.42 3/4 805- 007C 23.60 1 805- 010C 26.49

11/4 805- 012C 27.64 11/2 805- 015C 29.55

2 805- 020C 34.21 21/2 805- 025C 149.58

3 805- 030C 178.56 4 805- 040C 409.72

Size Code Price

Tee 90˚NPT female threadedST/ST reinforced 1/4 805- 002CSR 17.89

1/2 805- 005CSR 24.36 3/4 805- 007CSR 27.83 1 805- 010CSR 41.95

11/2 805- 015CSR 45.82 2 805- 020CSR 55.07

Size Code Price

Elbow 90˚NPT female threaded

1/4 808- 002C 8.30 3/8 808- 003C 8.30 1/2 808- 005C 5.39 3/4 808- 007C 8.01 1 808- 010C 11.31

11/4 808- 012C 21.66 11/2 808- 015C 24.16

2 808- 020C 32.67 21/2 808- 025C 91.99

3 808- 030C 102.62 4 808- 040C 162.74

Elbow 90˚NPT female threadedST/ST reinforced 1/2 808- 005CSR 4.06

3/4 808- 007CSR 5.89 1 808- 010CSR 7.74

11/4 808- 012CSR 14.79 11/2 808- 015CSR 17.97

2 808- 020CSR 24.54

Elbow 45˚NPT female threaded

1/4 819- 002C 10.83 3/8 819- 003C 10.92 1/2 819- 005C 10.54 3/4 819- 007C 11.80 1 819- 010C 13.25

11/4 819- 012C 22.42 11/2 819- 015C 23.00

2 819- 020C 30.52 21/2 819- 025C 67.82

3 819- 030C 87.16 4 819- 040C 136.25

SocketNPT female threaded

1/4 830- 002C 10.34 3/8 830- 003C 10.42 1/2 830- 005C 8.89 3/4 830- 007C 14.10 1 830- 010C 16.35

11/4 830- 012C 17.69 11/2 830- 015C 19.50

2 830- 020C 23.00 21/2 830- 025C 41.55

3 830- 030C 50.45 4 830- 040C 98.006 830- 060CF 286.99

NippleNPT male threaded

1/4 880- 015C 2.61 3/8 881- 015C 3.10 1/2 882- 020C 3.36 3/4 883- 020C 4.17 1 884- 030C 6.00

11/4 885- 035C 9.65 11/2 886- 035C 10.42

2 887- 040C 13.91 21/2 888- 050C 28.40

3 889- 050C 35.37 4 890- 060C 57.78

SocketNPT female threadedST/ST reinforced 1/2 830- 005CSR 8.30

3/4 830- 007CSR 13.25 1 830- 010CSR 15.16

11/4 830- 012CSR 16.35 11/2 830- 015CSR 17.78

2 830- 020CSR 21.46

Reducing SocketNPT female threadedST/ST reinforced

3/4 x 1/2 830-101CSR 19.241 x 1/2 830-130CSR 23.22 1 x 3/4 830-131CSR 23.22

11/4 x 1 830-168CSR 31.51 11/2 x 3/4 830-210CSR 45.01 11/2 x 1 830-211CSR 45.01 11/2 x 11/4 830-212CSR 45.01

2 x 1 830-249CSR 110.73 2 x 11/2 830-251CSR 110.73

Size Code PriceSize Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price


3

159

threaded fittings inch sizes

UnionNPT female threaded -FPM O-Ring 1/2 8058- 005C 15.56

3/4 8058- 007C 27.45 1 8058- 010C 37.88

11/4 8058- 012C 70.94 11/2 8058- 015C 71.54

2 8058- 020C 82.91 21/2 8058- 025C 133.56

3 8058- 030C 230.94 4 8058- 040C 277.34

UnionNPT female threaded -EPDM O-Ring 1/2 8098- 005C 15.38

3/4 8098- 007C 27.24 1 8098- 010C 37.51

11/4 8098- 012C 69.97 11/2 8098- 015C 70.73

2 8098- 020C 82.12 21/2 8098- 025C 116.91

3 8098- 030C 254.12 4 8098- 040C 272.50

UnionNPT female threadedST/ST reinforcedEPDM O-Ring

1/2 8098- 005CSR 16.83 3/4 8098- 007CSR 29.97 1 8098- 010CSR 41.16

11/4 8098- 012CSR 76.56 11/2 8098- 015CSR 84.06

2 8098- 020CSR 90.07 21/2 8098- 025CSR 154.79

3 8098- 030CSR 251.23 4 8098- 040CSR 296.67

CapNPT female threaded 1/4 848- 002C 6.50

3/8 848- 003C 6.50 1/2 848- 005C 5.71 3/4 848- 007C 9.46 1 848- 010C 13.32

11/4 848- 012C 23.38 11/2 848- 015C 24.36

2 848- 020C 35.18 21/2 848- 025C 80.44

3 848- 030C 106.71 4 848- 040C 155.01

PlugNPT male threaded

1/4 850- 002C 5.24 3/8 850- 003C 5.24 1/2 850- 005C 4.65 3/4 850- 007C 5.80 1 850- 010C 9.57

11/4 850- 012C 14.40 11/2 850- 015C 12.26

2 850- 020C 17.01 21/2 850- 025C 28.81

3 850- 030C 31.69 4 850- 040C 38.25

Reducing BushNPT male x NPT femalethread

3/8 x 1/4 839- 052C 9.571/2 x 1/4 839- 072C 9.651/2 x 3/8 839- 073C 9.573/4 x 1/4 839- 098C 10.713/4 x 3/8 839- 099C 10.713/4 x 1/2 839- 101C 4.65

1 x 1/4 839- 128C 11.69 1 x 3/8 839- 129C 11.69 1 x 1/2 839- 130C 7.93 1 x 3/4 839- 131C 7.93 11/4 x 1/2 839- 166C 15.66 11/4 x 3/4 839- 167C 15.56 11/4 x 1 839- 168C 15.38 11/2 x 1/2 839- 209C 18.83 11/2 x 3/4 839- 210C 18.93 11/2 x 1 839- 211C 18.83 11/2 x 11/4 839- 212C 18.35

2 x 1/2 839- 247C 21.462 x 3/4 839- 248C 21.462 x 1 839- 249C 21.46

2 x 11/4 839- 250C 21.25 2 x 11/2 839- 251C 18.83 21/2 x 2 839- 292C 49.84 3 x 11/2 839- 337C 68.60

3 x 2 839- 338C 68.203 x 21/2 839- 339C 67.24

4 x 2 839- 420C 116.914 x 3 839- 422C 115.97

We recommend the use of PTFE tape or Blue 75 Joint Compound for all threaded joints on plastic piping. Please check with our technical department before using any other type of pipe joint compounds, as these can cause stress cracking and lead to failure of the system.

Threaded Fittings

PTFE TapeBS7786

UnionNPT female threadedST/ST reinforcedFPM O-Ring

1/2 8058- 005CSR 17.30 3/4 8058- 007CSR 30.17 1 8058- 010CSR 41.55

11/4 8058- 012CSR 77.30 11/2 8058- 015CSR 84.64

2 8058- 020CSR 91.04 3 8058- 030CSR 255.10 4 8058- 040CSR 304.36

Reducing BushNPT male x NPT femalethreadedST/ST reinforced

11/2 x 1/2 839-209CSR 22.63 11/2 x 3/4 839-210CSR 22.63

2 x 1/2 839-247CSR 25.53 2 x 3/4 839-248CSR 25.53

2 x 1 839-249CSR 25.53 4 x 2 839-420CSR 139.34

Size Code Price

i

Size Code Price Size Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price

12x12x0.075mm 767-120 1.10Size Code Price


3

160

flanges inch sizes

Stub & Backing RingPlain Socket - DrilledANSI 150

1/2 854- 005C 14.68 3/4 854- 007C 15.28

1 854- 010C 17.49 11/4 854- 012C 21.08 11/2 854- 015C 23.95

2 854- 020C 30.94 21/2 854- 025C 60.12 3 D&E 854- 030CE 65.903 PN10 854- 030CN 65.903 ASA 854- 030C 65.90

4 854- 040C 87.546* 854- 060CM 149.98 8* 854- 080CM 408.75 10 854- 100C 1538.33 12 854- 120C 2299.7714 854- 140C 2643.7716 854- 160C 3308.57

Stub FlangePlain Socket

1/2 854-005-2C 10.54 3/4 854-007-2C 11.69

1 854-010-2C 13.05 11/4 854-012-2C 14.51 11/2 854-015-2C 16.05 2 854-020-2C 20.87 21/2 854-025-2C 36.13 3 854-030-2C 37.88 4 854-040-2C 51.02

6 854-060-2C 91.21 8 854-080-2C 190.17

10 854-100-2C 937.30 12 854-120-2C 1602.10

Stub & Backing RingPlain Spigot - DrilledANSI 150

1/2 856- 005C 16.83 3/4 856- 007C 18.46 1 856- 010C 21.66

11/4 856- 012C 26.28 11/2 856- 015C 29.76

2 856- 020C 42.92 21/2 856- 025C 66.68

3 856- 030C 75.77 4 856- 040C 81.38 6 856- 060C 166.40 8 856- 080C 332.40

10 856- 100C 1663.96 12 856- 120C 2487.25

Blind FlangeDrilled ANSI 150

1/2 853- 005C* 21.08 3/4 853- 007C* 23.60 1 853- 010C* 28.98

11/4 853- 012C* 33.26 11/2 853- 015C* 47.15

2 853- 020C* 50.24 21/2 853- 025C* 78.68

3 853- 030C* 77.69 4 853- 040C* 132.39 6 853- 060C* 215.50 8 853- 080C* 398.12

10 853- 100C* 788.53 12 853- 120C* 1304.4914 853- 140CF* 2989.7116 853- 160CF* 4634.33

Full Face FlangePlain Socket - DrilledANSI 150

1/2 851- 005C 14.79 3/4 851- 007C 15.66 1 851- 010C 17.69

11/4 851- 012C 21.08 11/2 851- 015C 24.54

2 851- 020C 31.08 21/2 851- 025C 61.27

3 851- 030C 65.51 4 851- 040C 91.79 6 851- 060C 151.50 8 851- 080C 330.49

Full Face FlangeNPT Female Threaded -Drilled ANSI 150

1/2 852- 005CSR 17.67 3/4 852- 007CSR 21.89 1 852- 010CSR 23.92

11/4 852- 012CSR 32.95 11/2 852- 015CSR 35.34

2 852- 020CSR 38.27 21/2 852- 025CSR 61.68

3 852- 030CSR 62.57 4 852- 040CSR 97.01

Van Stone Style Plastic Ring.Also available NPT Female Threaded

Drilled ANSI 150except * which are universal drilled:-BS 4504 EN1072 PN10BS10 Table D & EASA 150

Van Stone Style Plastic Ring

*See Note

Flanges drilled ANSI 150 are suitable for use at working pressures of up to 10 bar at 20˚C.*Note that the stub flange, when used with anappropriate steel backing ring, is suitable foruse at 16 bar, for sizes 1/2″ to 4″, and 10 bar for larger.

Flange Pressure Ratingsi

Size Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price


3

161

flanges inch sizes

Backing Ring Table D/EGalvanised Mild Steel 1/2 860-005-11E 7.58

3/4 860-007-11E 8.571 860-010-11E 9.00

11/4 860-012-11E 9.28 11/2 860-015-11E 11.37

2 860-020-11E 16.14 21/2 860-025-11E 24.12

3 860-030-11E 24.52 4 Table D 860-040-11D 31.69 4 Table E 860-040-11E 31.69

5 860-050-11E 48.816 860-060-11E 53.588 860-080-11E 72.51

10 860-100-11E 102.5712 860-120-11E 151.3614 860-14011E 422.1116 860-160-11E 518.11

Size Code PriceStub GasketEPDM

1/2 861-_-005 0.673/4 861-_-007 0.77

1 861-_-010 0.85 11/4 861-_-012 1.05 11/2 861-_-015 1.27 2 861-_-020 2.18 21/2 861-_-025 2.68 3 861-_-030 2.88 4 861-_-040 4.19 5 861-_-050 5.38 6 861-_-060 6.17 8 861-_-081 12.25 10 861-_-280 15.04 12 861-_-120 17.04

Size Code Price

Backing Ring NP10/16Galvanised Mild Steel 1/2 860-005-11NP 8.57

3/4 860-007-11NP 9.071 860-010-11NP 10.78

11/4 860-012-11NP 11.45 11/2 860-015-11NP 12.56

2 860-020-11NP 17.75 21/2 860-025-11NP 24.29

3 860-030-11NP 28.094 860-040-11NP 35.915 860-050-11NP 50.016 860-060-11NP 57.02

8 NP 10 860-080-11N 80.20 8 NP 16 860-080-11P 80.20 10 NP 10 860-100-11N 111.34 10 NP 16 860-100-11P 111.34 12 NP 10 860-120-11N 151.36 12 NP 16 860-120-11P 151.36 14 NP 10 860-140-11N 422.11 16 NP 10 860-160-11N 518.11

Size Code Price

Backing Ring ASA 150Galvanised Mild Steel 1/2 860-005-11A 8.57

3/4 860-007-11A 9.07 1 860-010-11A 10.78 11/4 860-012-11A 11.45 11/2 860-015-11A 12.56 2 860-020-11A 17.75 21/2 860-025-11A 24.29 3 860-030-11A 28.09 4 860-040-11A 35.91 5 860-050-11A 50.01 6 860-060-11A 57.02 8 860-080-11A 80.20 10 860-100-11A 111.34 12 860-120-11A 151.36 14 860-140-11A 422.11 16 860-160-11A 518.11

Size Code Price

GasketEPDM - full face

1/2 863-_-005 2.313/4 863-_-007 2.59

1 863-_-010 3.10 11/4 863-_-012 3.70 11/2 863-_-015 4.38 2 863-_-020 5.38 3 863-_-030 7.58 4 863-_-040 10.57 6 863-_-060 17.04 8 863-_-081 20.13 10 863-_-280 33.87 12 863-_-120 47.00

Size Code Price

GasketFPM - full face

1/2 864-_-005 18.313/4 864-_-007 21.12

1 864-_-010 26.28 11/4 864-_-012 28.90 11/2 864-_-015 34.23 2 864-_-020 44.01 3 864-_-030 62.33 4 864-_-040 85.25 6 864-_-060 138.62 8 864-_-081 150.98 10 864-_-280 182.26 12 864-_-120 236.01

Size Code Price

Stub GasketFPM

1/2 862-_-005 3.103/4 862-_-007 4.60

1 862-_-010 6.08 11/4 862-_-012 9.77 11/2 862-_-015 10.66 2 862-_-020 14.04 21/2 662-_-075 20.34 3 862-_-030 26.50 4 862-_-040 45.23 5 862-_-050 75.50 6 862-_-060 75.50 8 862-_-081 90.41 10 862-_-280 123.07 12 862-_-120 128.48

Size Code Price

Complete code when orderingInsert ‘ISO’ for NP10/16; ‘A’ for ANSI 150; ‘E’ for Table D/E





3

Size Code Price

162

manual valves inch sizes

Spears True Union 2000 Industrial Ball ValveDescription: In-line double union ball valve with lockable handleMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 1/2″ to 2″ - 16 bar; sizes 21/2″ to 6″ - 10 barAll sizes flanged - 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PVC-CSeals: EPDM or FPMSeats: PTFEEnd Connections: Solvent Sockets, Solvent Spigots, NPT Female Threaded, Reinforced NPT Female Threaded, FlangedFeatures: Sizes 1/2″ to 2″ Solvent Socket valves also include NPT Female Threaded end connections. All valves are assembled with Silicon-free, water soluble lubricant.Option: T-Handle operation on 6″ valve

1/2 1829-005C 55.613/4 1829-007C 70.01

1 1829-010C 83.38 11/4 1829-012C 132.52 11/2 1829-015C 139.97 2 1829-020C 187.22 21/2 1822-025C 419.69 3 1822-030C 490.75 4 1822-040C 889.22

6 1822-060C 1892.996* 18226-060C 1892.99

EPDM Seals PTFE Seats 1/2 1839-005C 58.83

3/4 1839-007C 74.13 1 1839-010C 88.22 11/4 1839-012C 140.28 11/2 1839-015C 148.10 2 1839-020C 204.95 21/2 1832-025C 444.10 3 1832-030C 519.32 4 1832-040C 940.95

6 1832-060C 2003.026* 18326-060C 2003.02

FPM SealsPTFE Seats

Inch Solvent Cement Sockets Inch Solvent Cement Sockets

*T-Handle operation *T-Handle operation

1/2 1827-005C 52.973/4 1827-007C 66.68

1 1827-010C 79.40 11/4 1827-012C 126.22 11/2 1827-015C 133.30 2 1827-020C 178.30 21/2 1827-025C 399.70 3 1827-030C 467.38 4 1827-040C 846.88

6 1827-060C 1802.856* 18276-060C on application


Size Code PriceEPDM Seals PTFE Seats 1/2 1837-005C 58.83

3/4 1837-007C 74.13 1 1837-010C 88.22 11/4 1837-012C 140.28 11/2 1837-015C 148.10

2 1837-020C 204.95 21/2 1837-025C 444.10

3 1837-030C 519.324 1837-040C 940.956 1837-060C 2003.02

6* 18376-060C on application

FPM SealsPTFE Seats

Inch Solvent Cement Spigots Inch Solvent Cement Spigots


1/2 1823-005C 80.933/4 1823-007C 95.75

1 1823-010C 112.71 11/4 1823-012C 166.33 11/2 1823-015C 178.92 2 1823-020C 237.17 21/2 1823-025C 514.24 3 1823-030C 592.89

4 1823-040C 1013.626 1823-060C 2088.53

6* 18236-060C 2088.53

EPDM Seals PTFE Seats 1/2 1833-005C 86.81

3/4 1833-007C 103.17 1 1833-010C 121.42 11/4 1833-012C 180.41 11/2 1833-015C 193.76 2 1833-020C 263.85 21/2 1833-025C 558.57 3 1833-030C 644.85 4 1833-040C 1107.71 6 1833-060C 2288.66

6* 18336-060C 2288.66

FPM SealsPTFE Seats

Flanged ANSI 150 Flanged ANSI 150


All Spears valves are assembled with a water soluble lubricant and are ″silicon free.″

Silicon Free Valvesi



3



163


Spears True Union 2000 Industrial Vented Ball ValveDescription: In-line double union ball valveMounting: In any positionMaximum Fluid Pressure at 20˚C: All sizes 1/2″ to 2″ - 16 bar; sizes 21/2″ to 4″ - 10 bar; all sizes flanged - 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PVC-CSeals: EPDM or FPMSeats: PTFEEnd Connections: Solvent Sockets, Solvent Spigots, Reinforced NPT Female Threaded, FlangedFeatures: Designed for Sodium Hypochlorite and other chemical applicationsVented ball equalises internal fluid pressure assuring proper valve operation and long life.

1/2 1829V-005C 77.623/4 1829V-007C 97.74

1 1829V-010C 116.36 11/4 1829V-012C 184.99 11/2 1829V-015C 195.36

2 1829V-020C 261.28 21/2 1822V-025C 585.82

3 1822V-030C 684.964 1822V-040C 1241.156 1822V-060C 2642.27

EPDM SealsPTFE Seats 1/2 1839V-005C 86.23

3/4 1839V-007C 108.62 1 1839V-010C 129.28 11/4 1839V-012C 205.62 11/2 1839V-015C 217.06

2 1839V-020C 300.34 21/2 1832V-025C 650.84

3 1832V-030C 761.114 1832V-040C 1379.086 1832V-060C 2935.65

FPM SealsPTFE Seats


1/2 1821V-005CSR 78.843/4 1821V-007CSR 100.80

1 1821V-010CSR 119.40 11/4 1821V-012CSR 194.10 11/2 1821V-015CSR 205.19

2 1821V-020CSR 271.93 21/2 1821V-025CSR 614.42

3 1821V-030CSR 713.584 1821V-040CSR 1274.52

EPDM SealsPTFE Seats 1/2 1831V-005CSR 87.52

3/4 1831V-007CSR 111.66 1 1831V-010CSR 132.29 11/4 1831V-012CSR 214.74 11/2 1831V-015CSR 226.87

2 1831V-020CSR 311.02 21/2 1831V-025CSR 679.44

3 1831V-030CSR 789.694 1831V-040CSR 1412.48

FPM SealsPTFE Seats

NPT Female ThreadedStainless Steel Reinforced


The Spears 2000 range incorporates new design features and improved value for money. The Industrial valve includes a lockable handle and features a full bore 6″ design. It is also available with a vented ball to provide long, trouble free operation for chemical applications.

Spears 2000 Range Featuresi

Our expert team are here to help.Call our freephone:

Need advice?



3

Size Code PriceSize Code Price

Valve Size Code Price

Valve Size Code Price

164


Spears ValveBracketIncludes: Polypropylene Valve Bracket,Screws and Nuts

Spears Ball ValveStem Extension KitSuitable for use with Spears True Union2000 Ball Valve.Does not include extension pipe.

Spears ActuatorMounting PlatformIncludes: Polypropylene MountingPlatform, Screws and Nuts.

Also available for butterfly valve.Please enquire for details.

1/2 BVSE2-005-000 12.253/4 BVSE2-007-000 13.59

1 BVSE2-010-000 13.59 11/4 BVSE2-012-000 22.13 11/2 BVSE2-015-000 25.16

2 BVSE2-020-000 27.18 21/2 & 3 BVSE2-030-000 27.83

4 BVSE2-040-000 38.16

1/2″/20mm TUMB2- 005 53.59 3/4″/25mm TUMB2- 007 56.82 1″/32mm TUMB2- 010 61.11 11/4″/40mm TUMB2- 012 63.93 11/2″/50mm TUMB2- 015 69.01

2″/63mm TUMB2- 020 76.913″/90mm TUMB2- 030 145.90

4″/110mm TUMB2- 040 178.36

Valve Size Code Price 1/2″/20mm MMP1- 005 22.743/4″/25mm MMP1- 007 23.55 1″/32mm MMP1- 010 27.38 11/4″/40mm MMP1- 012 30.02 11/2″/50mm MMP1- 015 40.98

2″/63mm MMP1- 020 46.283″/90mm MMP1- 030 104.32

4″/110mm MMP1- 040 120.10

1/2 2122- 005C 25.783/4 2122- 007C 34.05

1 2122- 010C 42.53 11/4 2122- 012C 85.98 11/2 2122- 015C 85.98

2 2122- 020C 112.653 2122- 030C 343.274 2122- 040C 633.146 2122- 060C 1102.51

EPDM SealsPTFE Seats 1/2 2132- 005C 28.73

3/4 2132- 007C 38.27 1 2132- 010C 47.85 11/4 2132- 012C 95.50 11/2 2132- 015C 95.50

2 2132- 020C 126.443 2132- 030C 381.914 2132- 040C 711.396 2132- 060C 1562.64


FPM SealsPTFE Seats

Description: In-line ball valveMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 1/2″ to 2″ - 16 bar; sizes 3″ to 6″ - 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PVC-CSeals: EPDM or FPMSeats: PTFEEnd Connections: Solvent Sockets, NPT Female Threaded, Flanged ANSI 150

Spears Compact Ball Valve


1/2 2121- 005C 25.783/4 2121- 007C 34.05

1 2121- 010C 42.53 11/4 2121- 012C 85.98 11/2 2121- 015C 85.98

2 2121- 020C 112.653 2121- 030C 343.274 2121- 040C 633.14

EPDM SealsPTFE Seats 1/2 2131- 005C 28.73

3/4 2131- 007C 38.27 1 2131- 010C 47.85 11/4 2131- 012C 95.50 11/2 2131- 015C 95.50

2 2131- 020C 126.443 2131- 030C 381.914 2131- 040C 711.39

FPM SealsPTFE Seats

NPT Female Threaded Sockets NPT Female Threaded Sockets


3




165


Spears True Union 2000 Standard Ball ValveDescription: In-line double union ball valveMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 1/2″ to 2″ - 16 bar; sizes 21/2″ to 4″ - 10 barAll sizes flanged - 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PVC-CSeals: EPDM or FPMSeats: PTFEEnd Connections: Solvent Sockets, Solvent Spigots, NPT Female Threaded, Reinforced NPT Female ThreadedFeatures: Sizes 1/2″ to 2″ Solvent Socket valves also include NPT Female Threaded end connections.

1/2 3629-005C 44.483/4 3629-007C 56.03

1 3629-010C 66.71 11/4 3629-012C 106.03 11/2 3629-015C 111.99 2 3629-020C 149.76 21/2 3622-025C 335.74 3 3622-030C 392.57 4 3622-040C 711.38

EPDM Seals PTFE/HDPE Seats 1/2 3639-005C 49.44

3/4 3639-007C 62.27 1 3639-010C 74.10 11/4 3639-012C 117.84 11/2 3639-015C 124.43 2 3639-020C 172.17 21/2 3632-025C 373.03 3 3632-030C 436.22 4 3632-040C 790.42

FPM SealsPTFE/HDPE Seats


1/2 3627-005C 44.483/4 3627-007C 56.03

1 3627-010C 66.71 11/4 3627-012C 106.03 11/2 3627-015C 111.99

2 3627-020C 149.746 21/2 3627-025C 335.74 3 3627-030C 392.57 4 3627-040C 711.38


3/4 3637-007C 62.27 1 3637-010C 74.10 11/4 3637-012C 117.84 11/2 3637-015C 124.43 2 3637-020C 172.17 21/2 3637-025C 373.03 3 3637-030C 436.22 4 3637-040C 790.42



1/2 3623-005C 73.843/4 3623-007C 86.55

1 3623-010C 101.66 11/4 3623-012C 148.14 11/2 3623-015C 159.89 2 3623-020C 211.63 21/2 3623-025C 455.97 3 3623-030C 524.39 4 3623-040C 886.45


3/4 3633-007C 92.79 1 3633-010C 109.08 11/4 3633-012C 159.97 11/2 3633-015C 172.33 2 3633-020C 233.99 21/2 3633-025C 493.21 3 3633-030C 568.04 4 3633-040C 965.49



We have access to a huge range of products that are not featured in our Handbook.

If you don’t see what you want, give our team a call.

Don’t see what you want?


3

3-Way Port Options - Spears Valves

Size Code Price

Size Code Price


Size Code Price

Size Code Price

166


1/2 5022*1- 005C 162.743/4 5022*1- 007C 194.23

1 5022*1- 010C 235.77 11/4 5022*1- 012C 272.50 11/2 5022*1- 015C 318.86

2 5022*1- 020C 391.35 21/2 5022*1- 025C 1318.01

3 5022*1- 030C 1345.07 4 5022*1- 040C 2435.08

EPDM SealsPTFE Seats 1/2 5032*1- 005C 176.25

3/4 5032*1- 007C 208.72 1 5032*1- 010C 258.94 11/4 5032*1- 012C 305.34 11/2 5032*1- 015C 348.82

2 5032*1- 020C 456.09 21/2 5032*1- 025C 1401.13

3 5032*1- 030C 1422.38 4 5032*1- 040C 2462.11

FPM SealsPTFE Seats

Spears 2000 Horizontal T-Port & L-Port Ball Valve


1/2 5021*1- 005CSR 167.753/4 5021*1- 007CSR 200.96

1 5021*1- 010CSR 241.57 11/4 5021*1- 012CSR 285.08 11/2 5021*1- 015CSR 338.21

2 5021*1- 020CSR 411.65 21/2 5021*1- 025CSR 1376.03

3 5021*1- 030CSR 1404.984 5021*1- 040CSR 2500.75

EPDM SealsPTFE Seats 1/2 5031*1- 005CSR 184.18

3/4 5031*1- 007CSR 215.50 1 5031*1- 010CSR 265.73 11/4 5031*1- 012CSR 319.85 11/2 5031*1- 015CSR 369.14

2 5031*1- 020CSR 478.32 21/2 5031*1- 025CSR 1459.10

3 5031*1- 030CSR 1480.344 5031*1- 040CSR 2527.83

FPM SealsPTFE Seats

NPT Female Threaded NPT Female Threaded

1/2 5023*1- 005C 332.403/4 5023*1- 007C 347.83

1 5023*1- 010C 494.77 11/4 5023*1- 012C 936.34 11/2 5023*1- 015C 964.35

2 5023*1- 020C 1252.30 21/2 5023*1- 025C 2199.28

3 5023*1- 030C 2228.264 5023*1- 040C 3237.07


3/4 5033*1- 007C 367.19 1 5033*1- 010C 541.11 11/4 5033*1- 012C 991.43 11/2 5033*1- 015C 1008.82

2 5033*1- 020C 1316.10 21/2 5033*1- 025C 2578.04

3 5033*1- 030C 2589.674 5033*1- 040C 3538.56

FPM SealsPTFE Seats


Vertical Horizontal

Description: In-line horizontal 3-way T-port or L-port ball valve with lockable handle and union endsMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 1/2″ to 2″ - 16 bar; sizes 21/2″ to 4″ - 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PVC-CSeals: EPDM or FPMSeats: PTFEEnd Connections: Solvent Sockets, NPT Female Threaded, Flanged ANSI 150

i* For T-Port insert T i.e. 5022T1-005C

For L-Port insert L i.e. 5022L1-005C

SingleL-Port

DoubleL-Port

TripleL-Port

T-Port L-Port T-Port


3


Size Code Price

Size Code Price

Size Code Price

Size Code Price

167


1/2 4722*1- 005C 161.773/4 4722*1- 007C 189.77

1 4722*1- 010C 230.94 11/4 4722*1- 012C 279.26 11/2 4722*1- 015C 322.74

2 4722*1- 020C 396.17 21/2 4722*1- 025C 1391.46

3 4722*1- 030C 1420.454 4722*1- 040C 2454.40


3/4 4732*1- 007C 206.77 1 4732*1- 010C 257.05 11/4 4732*1- 012C 329.52 11/2 4732*1- 015C 353.67

2 4732*1- 020C 459.97 21/2 4732*1- 025C 1406.90

3 4732*1- 030C 1433.964 4732*1- 040C 2479.49

FPM SealsPTFE Seats

Spears 2000 Vertical T-Port & L-Port Ball Valve


1/2 4721*1- 005CSR 164.463/4 4721*1- 007CSR 197.12

1 4721*1- 010CSR 237.70 11/4 4721*1- 012CSR 291.81 11/2 4721*1- 015CSR 343.98

2 4721*1- 020CSR 418.41 21/2 4721*1- 025CSR 1449.45

3 4721*1- 030CSR 1478.414 4721*1- 040CSR 2520.11

EPDM SealsPTFE Seats 1/2 4731*1- 005CSR 177.82

3/4 4731*1- 007CSR 213.55 1 4731*1- 010CSR 263.82 11/4 4731*1- 012CSR 342.06 11/2 4731*1- 015CSR 374.92

2 4731*1- 020CSR 482.19 21/2 4731*1- 025CSR 1464.89

3 4731*1- 030CSR 1490.024 4731*1- 040CSR 2545.22

FPM SealsPTFE Seats

NPT Threaded Sockets NPT Threaded Sockets

1/2 4723*1- 005C 334.333/4 4723*1- 007C 350.75

1 4723*1- 010C 500.52 11/4 4723*1- 012C 943.09 11/2 4723*1- 015C 979.82

2 4723*1- 020C 1261.96 21/2 4723*1- 025C 2208.94

3 4723*1- 030C 2239.874 4723*1- 040C 3287.29


3/4 4733*1- 007C 366.24 1 4733*1- 010C 542.10 11/4 4733*1- 012C 999.15 11/2 4733*1- 015C 1008.82

2 4733*1- 020C 1318.01 21/2 4733*1- 025C 2574.19

3 4733*1- 030C 2591.584 4733*1- 040C 3409.08

FPM SealsPTFE Seats


Description: In-line vertical 3-way T-port & L-port ball valve with lockable handle and union endsMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 1/2″ to 2″ - 16 bar; sizes 21/2″ to 4″ - 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PVC-CSeals: EPDM or FPMSeats: PTFEEnd Connections: Solvent Sockets, NPT Female Threaded, Flanged ANSI 150

The Spears 2000 Vertical L-Port Ball Valve is also available at additional cost with:- Double L-Port Function- Triple L-Port Function

Please enquire for details and prices.

Additional L-Port Optionsi

* For T-Port insert T i.e. 4723T1-005CFor L-Port insert L i.e. 4723L1-005C


3




168


Description: In-line gate valve with non rising stemMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes up to 2″ - 14 bar; 3″ - 10 bar; 4″ - 6 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PVC-C Gate: Polypropylene Seals: EPDM or FPMBonnet: PVC-C except 4″ which is Stainless Steel 316End Connections: Solvent Sockets, BSP or NPT threaded, flanged

Spears Gate Valve

1/2 2022- 005C 70.153/4 2022- 007C 75.97

1 2022- 010C 83.30 11/4 2022- 012C 146.10 11/2 2022- 015C 160.21

2 2022- 020C 184.77 21/2 2022- 025C 707.32

3 2022- 030C 977.90 4 2022- 040C 1760.58

1/2 2032- 005C 85.033/4 2032- 007C 91.60

1 2032- 010C 100.88 11/4 2032- 012C 178.96 11/2 2032- 015C 196.16

2 2032- 020C 226.12 21/2 2032- 025C 813.62

3 2032- 030C 1134.44 4 2032- 040C 2042.71

EPDM Seals FPM Seals


1/2 2021- 005C 70.153/4 2021- 007C 75.97

1 2021- 010C 83.30 11/4 2021- 012C 146.10 11/2 2021- 015C 160.21

2 2021- 020C 184.77 21/2 2021- 025C 707.32

3 2021- 030C 977.90 4 2021- 040C 1760.58

1/2 2031- 005C 85.033/4 2031- 007C 91.60

1 2031- 010C 100.88 11/4 2031- 012C 178.96 11/2 2031- 015C 196.16

2 2031- 020C 226.12 21/2 2031- 025C 813.62

3 2031- 030C 1134.44 4 2031- 040C 2042.72



1/2 2023- 005C 315.013/4 2023- 007C 340.14

1 2023- 010C 373.01 11/4 2023- 012C 504.40 11/2 2023- 015C 552.71

2 2023- 020C 643.56 21/2 2023- 025C 1049.38

3 2023- 030C 1223.334 2023- 040C 2201.21

EPDM Seals

Flanged ANSI 150

1/2 2033- 005C 345.933/4 2033- 007C 373.96

1 2033- 010C 409.72 11/4 2033- 012C 554.66 11/2 2033- 015C 607.80

2 2033- 020C 701.53 21/2 2033- 025C 1176.95

3 2033- 030C 1358.614 2033- 040C 2444.70

FPM Seals

Flanged ANSI 150

Register online for our technical catalogueTechnical Resources

www.ipsflowsystems.comScan the QR code or call our technical team on:0800 975 79 71


3

Size Code Price


Size Code Price

169


Spears Butterfly ValveDescription: Wafer style butterfly valveMounting: In any position, between flanges to ANSI 150Maximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PVC-CDisc: Glass reinforced PVC-CSeals: EPDM or FPMShaft: Stainless Steel 316End Connections: Flange mounted (flanges not included)

Also available bare shaft for remote or actuator mounting

11/2 722311- 015C 323.73 2 722311- 020C 344.98

21/2 722311- 025C 366.24 3 722311- 030C 399.064 722311- 040C 460.906 722311- 060C 682.218 722311- 080C 1157.64

EPDM Seals

Lever Operated

11/2 723311- 015C 655.15 2 723311- 020C 676.39

21/2 723311- 025C 734.36 3 723311- 030C 786.544 723311- 040C 983.686 723311- 060C 1573.148 723311- 080C 2661.16

FPM Seals

Lever Operated

11/2 722321- 015C 979.822 722321- 020C 1012.67

21/2 722321- 025C 1028.13 3 722321- 030C 1041.654 722321- 040C 1117.046 722321- 060C 1389.548 722321- 080C 1615.62

10 722321- 100C 2261.1212 722321- 120C 3194.56

EPDM Seals

Gear Operated

11/2 723321- 015C 1337.352 723321- 020C 1377.93

21/2 723321- 025C 1399.20 3 723321- 030C 1513.234 723321- 040C 1752.856 723321- 060C 2467.918 723321- 080C 3117.25

10 723321- 100C 5776.4912 723321- 120C 7508.09

FPM Seals

Gear Operated

The Spears butterfly valve uses a solid 316L grade stainless steel shaft that is completely isolated (dry stem) from the process fluid.

Industrial GradeButterfly Valvei


3





170


Spears Diaphragm ValveDescription: In-line diaphragm valve with position indicatorMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 1/2″ to 2″ - 16 bar(PTFE diaphragm - 10 bar); sizes 21/2″ to 4″ - 10 bar; size 6″ - 6.5 bar;size 8″ - 5 bar. All flanged valves - 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PVC-CSeals: EPDM, FPM, PTFE (EPDM backed) or PTFE (FPM backed)End Connections: Solvent Sockets, Solvent Spigots, NPT Female Threaded, FlangedFeatures: Sizes 1/2″ to 2″ Solvent Socket valves also include NPT Female Threaded end connections

1/2 2729-005C 160.403/4 2729-007C 178.56

1 2729-010C 206.77 11/4 2729-012C 310.19 11/2 2729-015C 318.86 2 2729-020C 340.14

EPDM DiaphragmEPDM Seals 1/2 2739-005C 205.81

3/4 2739-007C 219.35 1 2739-010C 266.69 11/4 2739-012C 400.04 11/2 2739-015C 415.50 2 2739-020C 426.14

FPM DiaphragmFPM Seals

1/2 2723-005C 194.233/4 2723-007C 217.43

1 2723-010C 267.66 11/4 2723-012C 342.06 11/2 2723-015C 345.93 2 2723-020C 387.46 21/2 2723-025C 703.47

3 2723-030C 1062.904 2723-040C 1459.106 2723-060C 4131.878 2723-080C 7438.53

EPDM DiaphragmEPDM Seals 1/2 2733-005C 214.52

3/4 2733-007C 239.66 1 2733-010C 298.58 11/4 2733-012C 391.35 11/2 2733-015C 401.00 2 2733-020C 434.83 21/2 2733-025C 785.61

3 2733-030C 1180.824 2733-040C 1619.506 2733-060C 4591.828 2733-080C 8263.71

FPM DiaphragmFPM Seals

Inch Solvent Cement Unions


1/2 2793T-005C 280.233/4 2793T-007C 299.57

1 2793T-010C 368.15 11/4 2793T-012C 463.82 11/2 2793T-015C 554.66 2 2793T-020C 615.53 21/2 2793T-025C 1215.61

3 2793T-030C 1598.254 2793T-040C 2123.926 2793T-060C 7303.258 2793T-080C 8356.51

PTFE DiaphragmEPDM Backed

EPDM Seals

1/2 2793VT-005C 310.193/4 2793VT-007C 331.43

1 2793VT-010C 407.78 11/4 2793VT-012C 513.10 11/2 2793VT-015C 610.70

2 2793VT-020C 684.15 21/2 2793VT-025C 1437.84

3 2793VT-030C 1768.314 2793VT-040C 2266.936 2793VT-060C 5604.498 2793VT-080C 9284.14

PTFE DiaphragmFPM Backed

FPM Seals


Inch Solvent Cement Unions

1/2 2729T-005C 230.943/4 2729T-007C 255.10

1 2729T-010C 310.19 11/4 2729T-012C 428.05 11/2 2729T-015C 433.86

2 2729T-020C 477.35

PTFE DiaphragmEPDM Backed

EPDM Seals

1/2 2739VT-005C 275.393/4 2739VT-007C 294.71

1 2739VT-010C 355.59 11/4 2739VT-012C 481.22 11/2 2739VT-015C 496.68

2 2739VT-020C 585.57

PTFE DiaphragmFPM Backed

FPM Seals

Inch Solvent Cement Unions Inch Solvent Cement Unions


3Size Code Price

Size Code Price

171


Description: Globe or Angle pattern flow control valveMounting: In any positionMaximum Fluid Pressure at 20˚C: 16 barFluid Temperature Range: 0˚C - 80˚CConstruction:Body: PVC-CSeal: PTFEEnd Connections: Female NPT ThreadedFeature: Built-in panel or bracket mounting nut

Spears Needle Valve

1/4 5591- 002C 91.393/8 5591- 003C 91.39

Globe Pattern Valve

1/4 5691- 002C 91.393/8 5691- 003C 91.39

Angle Pattern Valve

Last year we shipped 1 million metres of pipe, and more than

Will it be in stock?

95%of orders were complete, first time!


3

Size Code Price


Size Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price

172


Spears Laboratory Ball Valve

1/4 1522-002C 27.073/8 1522-003C 37.88 1/4 1521-002C 27.07

3/8 1521-003C 37.88

Valve onlyEPDM SealsPTFE Seats Valve only

EPDM SealsPTFE Seats

Inch Solvent Cement Sockets

1/4 1529-002C 33.62Valve, inc. kitEPDM SealsPTFE Seats

NPT Threaded Sockets


1/4 1539-002C 34.391/4 1531-002C 29.973/8 1531-003C 41.95

Valve, inc. kitFPM Seals

PTFE Seats Valve onlyFPM Seals

PTFE Seats


1/4 1532-002C 29.973/8 1532-003C 41.95

Valve onlyFPM Seals

PTFE Seats



Description: In-line ball valve with accessories Mounting: In any positionMaximum Fluid Pressure at 20˚C: 10 bar Fluid Temperature Range: 0˚C - 80˚CConstruction:Body: PVC-C Seals: EPDM or FPM Seats: PTFEEnd Connections: Solvent Socket or NPT Female ThreadedOption: Kit including hose nozzles and nipples

Spears Globe ValveDescription: In-line globe throttling valveMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PVC-CSeats & Seals: EPDM or FPMStem and Plug: PVC-CEnd Connections: Flanged ANSI 150Features: Fully serviceable, excellent flow regulating characteristics.Suitable for vacuum use.

21/2 6023-025C 688.97 3 6023-030C 688.97 4 6023-040C 894.79

6 6023-060C 1202.09

vEPDM Seals 21/2 6033-025C 766.26 3 6033-030C 766.26 4 6033-040C 983.68

6 6033-060C 1404.98

FPM Seals



3





173

Spears Y-Pattern ValveDescription: In-line Y-Pattern throttling valveMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 1/2″ to 2″ - 10 bar; sizes 21/2″ to 4″ - 6 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PVC-CSeats & Seals: EPDM or FPMEnd Connections: Solvent Sockets, Reinforced NPT Female Threaded, FlangedFeatures: Globe valve design provides proportional opening to seating disc travel for more accurate flow controlSpecial semi-rigid seating disc eliminates vibration for more accurate flow controlY-Pattern reduces flow restriction over standard globe valve

1/2 1722-005C 134.723/4 1722-007C 158.68

1 1722-010C 189.97 11/4 1722-012C 234.79 11/2 1722-015C 310.19 2 1722-020C 439.66 3 1722-030C 940.22

4 1722-040C 1596.33

EPDM 1/2 1732-005C 142.043/4 1732-007C 169.66

1 1732-010C 202.92 11/4 1732-012C 249.29 11/2 1732-015C 328.56 2 1732-020C 468.65

3 1732-030C 1022.334 1732-040C 1737.40

FPM


1/2 1721-005CSR 138.373/4 1721-007CSR 164.07

1 1721-010CSR 200.04 11/4 1721-012CSR 243.51 11/2 1721-015CSR 334.33

2 1721-020CSR 466.733 1721-030CSR 1008.824 1721-040CSR 1590.50

EPDM1/2 1731-005CSR 147.653/4 1731-007CSR 175.31

1 1731-010CSR 202.92 11/4 1731-012CSR 261.87 11/2 1731-015CSR 352.72

2 1731-020CSR 492.803 1731-030CSR 1091.904 1731-040CSR 1808.90

FPM



1/2 1723-005C 221.283/4 1723-007C 253.17

1 1723-010C 306.34 11/4 1723-012C 367.19 11/2 1723-015C 496.68 2 1723-020C 632.91

3 1723-030C 1217.544 1723-040C 1975.12

EPDM1/2 1733-005C 229.013/4 1733-007C 263.82

1 1733-010C 319.85 11/4 1733-012C 380.73 11/2 1733-015C 515.04 2 1733-020C 661.91

3 1733-030C 1300.654 1733-040C 2100.71

FPM



3




Size Code Price

174


Spears True Union Check (Non-Return) ValveDescription: In-line cone check valve Mounting: In a vertical positionMaximum Fluid Pressure at 20˚C: Sizes up to 2″ - 16 bar;sizes 21/2″ to 6″ - 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PVC-C Seals: EPDM or FPMEnd Connections: Solvent Sockets, NPT Female Threaded, FlangedOption: Silicon-free

1/2 2229- 005C 69.203/4 2229- 007C 82.69

1 2229- 010C 97.59 11/4 2229- 012C 168.14 11/2 2229- 015C 168.14

2 2229- 020C 225.14 21/2 2222- 025C 470.59

3 2222- 030C 470.594 2222- 040C 1031.99

6* 2222- 060C 1837.90

1/2 2239- 005C 76.913/4 2239- 007C 91.99

1 2239- 010C 108.43 11/4 2239- 012C 186.71 11/2 2239- 015C 186.71

2 2239- 020C 250.28 21/2 2232- 025C 522.77

3 2232- 030C 522.774 2232- 040C 1147.93

6* 2232- 060C 2060.14

1/2 2229- 005C 69.203/4 2229- 007C 82.69

1 2229- 010C 97.59 11/4 2229- 012C 168.14 11/2 2229- 015C 168.14

2 2229- 020C 225.14 21/2 2221- 025C 470.59

3 2221- 030C 470.594 2221- 040C 1031.99

1/2 2239- 005C 76.913/4 2239- 007C 91.99

1 2239- 010C 108.43 11/4 2239- 012C 186.71 11/2 2239- 015C 186.71

2 2239- 020C 250.28 21/2 2231- 025C 522.77

3 2231- 030C 522.774 2231- 040C 1147.93





1/2 2223- 005C 82.913/4 2223- 007C 98.97

1 2223- 010C 118.08 11/4 2223- 012C 200.04 11/2 2223- 015C 213.55

2 2223- 020C 376.87 21/2 2223- 025C 599.11

3 2223- 030C 761.444 2223- 040C 1260.046 2223- 060C 2168.36

1/2 2233- 005C 103.603/4 2233- 007C 125.23

1 2233- 010C 145.72 11/4 2233- 012C 247.37 11/2 2233- 015C 266.69

2 2233- 020C 403.91 21/2 2233- 025C 682.21

3 2233- 030C 834.88 4 2233- 040C 1352.826 2233- 060C 2348.08



1/2 FVS- 005C 68.043/4 FVS- 007C 73.24

1 FVS- 010C 83.30 11/4 FVS- 012C 128.52 11/2 FVS- 015C 133.35

2 FVS- 020C 147.27 21/2 FVS- 025C 214.52

3 FVS- 030C 239.664 FVS- 040C 342.06

Foot Valve ScreenFits all socket ball check valves


*Venturied to 4″ *Venturied to 4″


3





175

Spears True Union 2000 Industrial Ball Check ValveDescription: In-line ball check valveMounting: VerticalMaximum Fluid Pressure at 20˚C: Sizes 1/2″ to 2″ - 16 bar; sizes 21/2″ to 6″ - 10 barAll sizes flanged - 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PVC-CSeals: EPDM or FPMEnd Connections: Solvent Sockets, Solvent Spigots, NPT Female Threaded, Reinforced NPT Female Threaded, FlangedFeatures: Sizes 1/2″ to 2″ Solvent Socket valves also include NPT Female Threaded end connections. All valves are assembled with Silicon-free, water soluble lubricant

1/2 4529-005C 59.693/4 4529-007C 71.54

1 4529-010C 84.27 11/4 4529-012C 144.93 11/2 4529-015C 144.93 2 4529-020C 194.23 21/2 4522-025C 405.85 3 4522-030C 405.85 4 4522-040C 890.91

6 4522-060C 3675.79

EPDM Seals 1/2 4539-005C 66.483/4 4539-007C 79.42

1 4539-010C 93.54 11/4 4539-012C 161.00 11/2 4539-015C 161.00 2 4539-020C 216.47 21/2 4532-025C 451.26 3 4532-030C 451.26 4 4532-040C 991.43

6 4532-060C 4083.54

FPM Seals


1/2 4527-005C 59.693/4 4527-007C 71.54

1 4527-010C 84.27 11/4 4527-012C 144.93 11/2 4527-015C 144.93 2 4527-020C 194.23 21/2 4527-025C 405.85 3 4527-030C 405.85 4 4527-040C 890.91 6 4527-060C 3675.79

EPDM Seals 1/2 4537-005C 66.483/4 4537-007C 79.42

1 4537-010C 93.54 11/4 4537-012C 161.00 11/2 4537-015C 161.00 2 4537-020C 216.47 21/2 4537-025C 451.26 3 4537-030C 451.26 4 4537-040C 991.43

6 4537-060C 4083.54

FPM Seals


1/2 4523-005C 74.003/4 4523-007C 88.34

1 4523-010C 105.53 11/4 4523-012C 177.82 11/2 4523-015C 189.97 2 4523-020C 336.28 21/2 4523-025C 659.02 3 4523-030C 680.26

4 4523-040C 1124.766 4523-060C 5994.88

EPDM Seals 1/2 4533-005C 92.563/4 4533-007C 111.87

1 4533-010C 130.05 11/4 4533-012C 221.28 11/2 4533-015C 237.70 2 4533-020C 360.43 21/2 4533-025C 608.76 3 4533-030C 745.96

4 4533-040C 1207.866 4533-060C 6232.58

FPM Seals



3

Size Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price

176

filters and strainers inch sizes

Description: In-line strainer with serviceable basket filterMounting: VerticalMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PVC-CStrainer Basket: PVC-C or 316 Stainless SteelStrainer Mesh Sizes: PVC-C: 1/32″, 1/16″, 1/8″ or 3/16″;Stainless Steel: 20, 40, 60, 80, 100, 150, 200, 325 MeshSeals: FPMEnd Connections: Solvent Socket, NPT Threaded or FlangedGauge: Optional

Hayward Simplex Basket Strainer

1/2 SB2050ST 608.143/4 SB2075ST 608.14

1 SB2100ST 608.14 11/4 SB125ST 1083.13 11/2 SB2150ST 1083.13 2 SB2200ST 1083.13 3 SB2300S 2400.71 4 SB2400S 2400.71

PVC-C BodyPVC-C Basket


1/2 SB2050ST 608.143/4 SB2075ST 608.14

1 SB2100ST 608.14 11/4 SB125ST 1083.13 11/2 SB2150ST 1083.13 2 SB2200ST 1083.13 3 SB2300T 2400.71 4 SB2400T 2400.71


NPT Female Threaded

1/2 SB2050F 666.823/4 SB2075F 666.82

1 SB2100F 666.80 11/4 SB2125F 1219.93 11/2 SB2150F 1219.93 2 SB2200F 1219.93 3 SB2300F 3090.21 4 SB2400F 3193.30 6 SB2600FT 6580.01 8 SB2800FT 8670.23


Flanged ANSI 150

1/2, 3/4, 1 BS21001/_ 11/2, 2 BS22001/_

3, 4 BS24001/_ 6 BS26001/_ 8 BS28001/_

Spare PVC-C BasketNew Style

To specify the mesh size, add to part number, e.g. 3″ basket c/w 1/32 mesh = BS103001/32

1/2, 3/4, 1 BS710/_ 11/2, 2 BS720/_

3, 4 BS740/_ 6 BS760/_ 8 BS780/_

Spare Stainless Steel BasketNew Style

To specify the mesh size, add to part number, e.g. 2″ basket c/w 60 mesh = BS702060* Note that the new style strainer requires the additional use of a PVC-C adaptor

Duplex Style Available.Please enquire for prices.

1/2 - 1 BS710(XX) 11/4 - 2 BS720(XX) 21/1 - 4 BS740(XX) 6 BS7600(XX) 8 BS7800(XX)

Optional Extras

To replace the plastic basket with one stainless steel basket, add the basket price to the strainer price(XX) Replace with mesh required. For 100 mesh replace (XX) with 100

on

application

on

application

on

application

Ideal for controlled draining on basket strainers. Includes ball vale with locking lever, drilled ball and nipple piece. Please enquire for details.

Drain Kits

i


3





filters and strainers inch sizes

177

Spears Y-Strainer

1/2 YS32C_-005C 134.87*3/4 YS32C_-007C 149.06*

1 YS32C_-010C 189.91* 11/4 YS32C_-012C 293.75* 11/2 YS32C_-015C 305.55* 2 YS32C_-020C 392.49* 3 YS32C_-030C 630.53

4 YS32C_-040C 1093.91

1/2 YS22C_-005C 120.55*3/4 YS22C_-007C 132.34*

1 YS22C_-010C 168.14* 11/4 YS22C_-012C 244.80* 11/2 YS22C_-015C 261.66* 2 YS22C_-020C 371.41* 3 YS22C_-030C 587.48

4 YS22C_-040C 1017.95

PVC-C ScreenEPDM Seals

PVC-C ScreenFPM Seals

Inch Solvent Cement SocketsInch Solvent Cement Sockets

1/2 YS33C_-005C 327.563/4 YS33C_-007C 340.13

1 YS33C_-010C 364.30 11/4 YS33C_-012C 584.60 11/2 YS33C_-015C 662.88 2 YS33C_-020C 824.25

3 YS33C_-030C 1103.524 YS33C_-040C 1766.39

1/2 YS23C_-005C 294.713/4 YS23C_-007C 313.13

1 YS23C_-010C 334.33 11/4 YS23C_-012C 524.83 11/2 YS23C_-015C 597.17 2 YS23C_-020C 750.80

3 YS23C_-030C 1026.194 YS23C_-040C 1642.70

PVC-C ScreenEPDM Seals

PVC-C ScreenFPM Seals

Flanged ANSI 150Flanged ANSI 150

1/2 YS32S_-005C 284.343/4 YS32S_-007C 321.78

1 YS32S_-010C 397.15 11/4 YS32S_-012C 540.16 11/2 YS32S_-015C 589.43 2 YS32S_-020C 719.90 3 YS32S_-030C 864.83

4 YS32S_-040C 1432.04

1/2 YS22S_-005C 251.213/4 YS22S_-007C 286.01

1 YS22S_-010C 353.67 11/4 YS22S_-012C 510.21 11/2 YS22S_-015C 526.65 2 YS22S_-020C 659.99 3 YS22S_-030C 803.97

4 YS22S_-040C 1331.55

St/St ScreenEPDM Seals

St/St ScreenFPM Seals

Inch Solvent Cement SocketsInch Solvent Cement Sockets

1/2 YS33S_-005C 403.923/4 YS33S_-007C 430.01

1 YS33S_-010C 477.35 11/4 YS33S_-012C 734.35 11/2 YS33S_-015C 817.48 2 YS33S_-020C 958.56 3 YS33S_-030C 1246.52 4 YS33S_-040C 1946.10

1/2 YS23S_-005C 362.373/4 YS23S_-007C 385.55

1 YS23S_-010C 428.05 11/4 YS23S_-012C 659.99 11/2 YS23S_-015C 733.42 2 YS23S_-020C 884.57

3 YS23S_-030C 1159.564 YS23S_-040C 1808.89

St/St ScreenEPDM Seals

St/St ScreenFPM Seals

Flanged ANSI 150Flanged ANSI 150

To specify the mesh size, add the following to the part number:Mesh Size Hole Size Part Number8 2.39mm 812 1.57mm 1220 0.84mm 2030 0.61mm 30e.g. YS22C8 - 005C

Optional Mesh Codes

*Note: Price is for PVC-C 20 mesh strainer.Please enquire for alternative mesh prices.

*Note: Price is for PVC-C 20 mesh strainer.Please enquire for alternative mesh prices.

Description: In-line strainer Mounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PVC-C Seals: EPDM or FPMStrainer: PVC-C or Stainless Steel - 8, 12, 20 or 30 meshEnd Connections: Solvent Socket, Flanged ANSI 150 or NPT reinforced female threaded

i


3Corzan Pipe PN16Plain ended - standard length 5m

nominal Maximum Minimum Durapipe VDLSize bore Pressure (bar) Weight/m O.D. (mm) Wall (mm) Code Price/m Code Price/m

16 13.6 16 0.11 16.0 1.2 38 560 305 5.04 - 20 17.0 16 0.17 20.0 1.5 38 560 306 8.00 7095002001 6.80 25 21.2 16 0.26 25.0 1.9 38 560 307 11.82 7095002501 10.64 32 27.2 16 0.42 32.0 2.4 38 560 308 12.14 7095003201 11.49 40 34.0 16 0.63 40.0 3.0 38 560 309 18.04 7095004001 17.57 50 42.6 16 0.97 50.0 3.7 38 560 310 27.75 7095005001 26.69 63 53.6 16 1.53 63.0 4.7 38 560 311 44.33 7095006301 42.55 75 63.8 16 2.20 75.0 5.6 38 560 312 65.02 7095007501 60.10 90 76.6 16 2.88 90.0 6.7 38 560 313 100.47 7095009001 92.62110 93.6 16 4.31 110.0 8.2 38 560 314 150.67 7095011001 139.40160* 144.6 10 6.06 160.0 7.7 38 555 317 224.36 -

* PN10Please note only the Durapipe range is WRAS approved, VDL range is WRAS approval pending.

178

pipe mm sizes

Pipework Support

Temperature De-Rating Factors

PVC-C pipework requires more support than for metallic systems. As working temperature increases, the distance between supports is reduced. For temperatures indicated by * continuous support is required.

20 1.00 30 0.86 40 0.71 50 0.56 60 0.43 70* 0.33 80** 0.25 85*** 0.21 95**** 0.21

Working Pressure Temperature (˚C) De-Rating Factor

16 0.75 0.70 0.70 0.65 0.60 * * * 20 0.80 0.75 0.75 0.70 0.65 0.50 0.50 * 25 0.85 0.80 0.80 0.75 0.70 0.60 0.55 * 32 0.95 0.90 0.90 0.85 0.80 0.70 0.65 * 40 1.05 1.00 1.00 0.95 0.90 0.80 0.75 0.50 50 1.20 1.05 1.10 1.05 1.00 0.90 0.85 0.60 63 1.35 1.30 1.25 1.20 1.15 1.10 1.05 0.80 75 1.45 1.40 1.35 1.30 1.25 1.15 1.10 0.85 90 1.60 1.55 1.50 1.40 1.35 1.20 1.15 0.90 110 1.80 1.75 1.70 1.60 1.55 1.35 1.30 1.05 160 2.00 1.90 1.85 1.80 1.75 1.60 1.40 1.10

Support Centres/m Pipe Size 20˚C 30˚C 40˚C 50˚C 60˚C 70˚C 80˚C 90˚C

PN 16 PIPE

Pressure ratings for Durapipe PVC-C pipework systems are always quoted at 20˚C. As working temperature increases, the maximum working pressure decreases by the factor indicated.

Durapipe pressure de-rating factors are based on a design life of 50 years except for:* 15 years ** 5 years ***3 years ****1 yearConsult our technical department to discuss higher pressures and the effect on design life.


3

fittings mm sizes

179

Tee 90˚ Size Code Price 20 7008202001 4.54 25 7008202501 5.11 32 7008203201 6.65 40 7008204001 10.03 50 7008205001 15.31 63 7008206301 25.29 75 7008207501 59.00 90 7008209001 98.14 110 7008211001 158.33

Reducing Tee 90˚ Size Code Price

25x20 7008702511 8.7732x20 7008703221 13.5932x25 7008703211 13.5940x25 7008704021 22.1940x32 7008704011 22.1950x25 7008705031 29.1150x32 7008705021 29.1163x32 7008706331 45.1463x50 7008706311 45.14

Elbow 90˚ Size Code Price 20 7005102001 3.75

25 7005102501 3.94 32 7005103201 5.11 40 7005104001 9.24 50 7005105001 11.98 63 7005106301 19.24 75 7005107501 44.16 90 7005109001 72.68 110 7005111001 118.45

Elbow 45˚ Size Code Price 20 7006702001 5.69

25 7006702501 6.11 32 7006703201 7.84 40 7006704001 11.20 50 7006705001 13.75 63 7006706301 20.86 75 7006707501 48.10 90 7006709001 71.77 110 7006711001 116.49

Socket Size Code Price 20 7011602001 3.15

25 7011602501 3.34 32 7011603201 4.08 40 7011604001 6.11 50 7011605001 7.07 63 7011606301 12.16 75 7011607501 28.30 90 7011609001 48.12 110 7011611001 70.79

Reducing Bush Size Code Price

25x20 7016702551 3.1532x20 7016703221 4.2232x25 7016703211 4.3040x25 7016704021 4.9440x32 7016704011 4.6750x32 7016705021 6.5150x40 7016705011 6.1163x32 7016706331 8.0763x40 7016706321 8.0763x50 7016706311 8.0775x50 7016707521 12.7775x63 7016707511 12.7790x50 7016709031 24.2390x63 7016709021 24.2390x75 7016709011 24.33110x63 7016711031 33.66110x90 7016711011 33.66

UnionEPDM Size Code Price

20 7020102001 15.7725 7020102501 17.87

32 7020103201 24.77 40 7020104001 29.40 50 7020105001 41.15 63 7020106301 65.60FPM available on request

Cap Size Code Price 20 7018102001 3.15

25 7018102501 3.94 32 7018103201 6.11 40 7018104001 8.64 50 7018105001 12.16 63 7018106301 16.48 75 7018107501 37.61 90 7018109001 41.02 110 7018111001 60.91

SocketPlain Socket x BSPFemale Thread

Size Code Price 20x1/2 7014102001 11.48 25x3/4 7014102501 12.86 32x1 7014103201 16.88 40x11/4 7014104001 20.71 50x11/2 7014105001 27.88 63x2 7014106301 33.80

Socket UnionPlain Socket x BSPFemale Thread

Size Code Price20x1/2 7020602001 27.12 25x3/4 7020602501 29.84 32x1 7020603201 36.76 40x11/4 7020604001 43.89 50x11/2 7020605001 61.14 63x2 7020606301 88.53EPDM seals FPM available to order

NipplePlain Socket/Spigot xBSP Male

Size Code Price 20x1/2 7015202021 5.27 25x32x3/4 7015202511 6.43 25x32x1 7015202501 6.43 32x40x1 7015203211 7.3032x40x11/4 7015203201 7.30 40x50x11/4 7015204011 9.60 40x50x11/2 7015204001 9.60 50x63x11/2 7015205021 14.10 50x63x2 7015205011 14.10 63x75x2 7015206321 20.75

Please note: VDL range is WRAS approval pending.


3

180

fittings mm sizes

Tee 90˚ Size Code Price

16 38 122 305 4.7120 38 122 306 5.18 25 38 122 307 5.6232 38 122 308 7.4140 38 122 309 11.2350 38 122 310 17.1263 38 122 311 28.2575 38 122 312 65.2990 38 122 313 110.21

110 38 122 314 177.61 160 38 122 317 327.44

Reducing Tee 90˚ Size Code Price

25x20 38 124 415 9.8532x20 38 124 418 15.9832x25 38 124 419 15.9840x20 38 124 421 26.1040x25 38 124 422 26.1050x25 38 124 425 34.2450x32 38 124 426 34.2463x25 38 124 429 53.1063x32 38 124 430 53.1075x25 38 124 434 96.0390x25 38 124 439 142.14110x25 38 124 445 192.33


16 38 115 305 3.6020 38 115 306 4.0625 38 115 307 4.5332 38 115 308 5.6240 38 115 309 10.1450 38 115 310 13.3063 38 115 311 21.3275 38 115 312 49.4590 38 115 313 81.54

110 38 115 314 132.66 160 38 115 317 277.86


20 38 119 306 6.3125 38 119 307 6.7632 38 119 308 8.7640 38 119 309 12.6050 38 119 310 15.2363 38 119 311 23.3475 38 119 312 53.9590 38 119 313 80.51

110 38 119 314 130.55 160 38 119 317 336.47

Socket Size Code Price

16 38 100 305 3.3420 38 100 306 3.3425 38 100 307 3.6032 38 100 308 4.5340 38 100 309 6.7650 38 100 310 8.1063 38 100 311 13.4775 38 100 312 31.4490 38 100 313 53.95

110 38 100 314 83.27 160 38 100 317 198.94

Reducing Bush Size Code Price

20x16 38 109 412 2.6925x20 38 109 415 3.3432x20 38 109 418 4.9632x25 38 109 419 4.9640x20 38 109 421 5.3740x25 38 109 422 5.3740x32 38 109 423 5.3750x32 38 109 426 6.7650x40 38 109 427 6.7663x32 38 109 430 9.0263x40 38 109 431 9.0263x50 38 109 432 9.0275x50 38 109 437 14.3775x63 38 109 438 14.3790x50 38 109 442 27.0190x63 38 109 443 27.0190x75 38 109 444 27.07110x63 38 109 449 37.83110x75 38 109 450 37.83110x90 38 109 451 37.83160x110 38 109 474 92.54

UnionEPDM Size Code Price

16 38 205 305 15.7820 38 205 306 17.5225 38 205 307 19.8532 38 205 308 27.7140 38 205 309 32.7950 38 205 310 46.1063 38 205 311 72.96

FPM available on request

Cap Size Code Price

20 38 140 306 3.3425 38 140 307 4.5332 38 140 308 6.7640 38 140 309 9.4750 38 140 310 13.4763 38 140 311 18.4475 38 140 312 46.1090 38 140 313 46.10

110 38 140 314 68.44


3

adaptor fittinmgs mm sizes

181

UnionPlain Socket x BrassBSP Female

Size Code Price 16x3/8 38 216 305 23.80 20x1/2 38 216 306 30.28 25x3/4 38 216 307 37.83 32x1 38 216 308 45.82 40x11/4 38 216 309 64.40 50x11/2 38 216 310 79.77 63x2 38 216 311 89.91

NipplePlain Socket/Spigot xBSP Male

Size Code Price 16x20x3/8 38 171 332 5.85 20x25x1/2 38 171 334 5.85 25x32x3/4 38 171 336 6.76 32x40x1 38 171 338 7.69 40x50x11/4 38 171 340 9.88 50x63x11/2 38 171 342 14.37 63x75x2 38 171 345 19.85

SocketPlain Socket x BSPFemale Thread


Socket UnionPlain Socket x BSPFemale Thread

Size Code Price20x1/2 38 202 306 31.90 25x3/4 38 202 307 35.10 32x1 38 202 308 43.24 40x11/4 38 202 309 51.63 50x11/2 38 202 310 71.93 63x2 38 202 311 98.35EPDM seals FPM available to order

UnionPlain Socket x BrassBSP Male


Tee 90˚Plain Socket x BSPFemale Thread

Size Code Price 16x3/8 38 121 602 6.54 16x1/2 38 121 305 6.54 20x1/2 38 121 306 8.12 25x3/4 38 121 307 10.00 32x1 38 121 308 15.64 40x11/4 38 121 309 27.15 50x11/2 38 121 310 35.72 63x2 38 121 311 56.55

Elbow 90˚Plain Socket x BSPFemale Thread

Size Code Price 16x3/8 38 178 602 8.71 16x1/2 38 178 305 8.71 20x1/2 38 178 306 14.84 25x3/4 38 178 307 16.27 32x1 38 178 308 19.29 40x11/4 38 178 309 31.90 50x11/2 38 178 310 45.38 63x2 38 178 311 61.20

Register online for our technical catalogueTechnical Resources

www.ipsflowsystems.comScan the QR code or call our technical team on:0800 975 79 71


3

182

flanges mm sizes

Stub FlangeSerrated Face Size Code Price

20 38 135 306 3.6025 38 135 307 4.0632 38 135 308 5.3740 38 135 309 7.6950 38 135 310 12.1863 38 135 311 23.8075 38 135 312 38.7390 38 135 313 44.55

110 38 135 314 62.52 160 38 135 317 87.34

Stub GasketEPDM Size Code Price

20 861-_-005 0.6725 861-_-007 0.77

32 861-_-010 0.85 40 861-_-012 1.05 50 861-_-015 1.27 63 861-_-020 2.18 75 861-_-025 2.68 90 861-_-030 2.88 110 861-_-040 4.19 160 861-_-061 6.17

Stub GasketFPM Size Code Price

20 862-_-005 3.1025 862-_-007 4.60

32 862-_-010 6.08 40 862-_-012 9.77 50 862-_-015 10.66 63 862-_-020 14.04 75 862-_-025 20.34 90 862-_-030 26.50 110 862-_-040 45.23 160 862-_-061 75.50

Backing RingDrilled to ANSI 150 Size Code Price

20 860-005-12A 8.5725 860-007-12A 9.07

32 860-010-12A 10.78 40 860-012-12A 11.45 50 860-015-12A 12.56 63 860-020-11A 17.75 75 860-025-11A 24.29 90 860-030-11A 28.09 110 860-040-11A 35.91 160 860-060-13A 55.98

Backing RingDrilled to BS10 Table D Size Code Price

20 860-005-12E 7.5825 860-007-12E 8.57

32 860-010-12E 9.00 40 860-012-12E 9.28 50 860-015-12E 11.37 63 860-020-11E 16.14 75 860-025-11E 24.12 90 860-030-11E 24.52 110 860-040-11D 31.69 110 860-040-11E 31.69 160 860-060-13E 55.98

Backing RingDrilled to BS4504PN10/PN16

Size Code Price 20 860-005-12NP 8.57

25 860-007-12NP 9.07 32 860-010-12NP 11.08 40 860-012-12NP 11.77 50 860-015-12NP 12.56 63 860-020-11NP 17.75 75 860-025-11NP 24.29 90 860-030-11NP 28.09 110 860-040-11NP 35.91 160 860-060-13NP 58.62

How much Solvent Cement?Estimate the number of joints per size, then use this table to calculate how much solvent cement to order.Allow approximately one half the cement quantity in C-65 cleaner.Detailed jointing instructions are available on request.

Pipe Size Joints per litre 16-32 30040-63 12075-90 50

110-160 15

One Step Solvent Size Code Price

1/2 litre 38 462 395 34.24

Eco-cleaner Size Code Price 1/2 litre 03 457 395 15.79

What size Brush?It is important to use the correct size brush to apply solvent cement.

10-32 8mm round40-63 25 x 3mm flat75-140 50 x 10mm flat

160 75 x 10mm flat

Pipe Size Brush Size

Brushes

4mm round L151/4R 1.518mm round L151/8R 2.12

25 x 10mm flat 565/1 2.3450 x 10mm flat 565/2 5.3675 x 10mm flat 565/3 14.10

Size Code Price

solvent cement

Complete code when orderingInsert ‘I’ for NP10/16, ‘A’ for ANSI 150;‘E’ for Table D/E

Complete code when orderingInsert ‘I’ for NP10/16, ‘A’ for ANSI 150;‘E’ for Table D/E

Stub FlangeSerrated Face Size Code Price

63 7019606301 21.30 75 7019607501 32.92 90 7019609001 39.71 110 7019611001 55.93

Durapipe

VDL


3

Size Code Price


manual valves mm sizes

183

16 H0 DKK 305 88.58 20 H0 DKK 306 88.98

25 H0 DKK 307 117.1232 H0 DKK 308 138.08

40 H0 DKK 309 140.66 50 H0 DKK 310 193.0663 H0 DKK 311 263.3775 H0 DKK 312 721.4990 H0 DKK 313 887.19

110 H0 DKK 314 1077.06

FPM SealsPTFE Seats

Durapipe VKD Double Union Ball Valve

MM Solvent Cement Sockets

Description: In-line double union ball valve with lockable handleMounting: In any positionMaximum Fluid Pressure at 20˚C: 16 barFluid Temperature Range: 5ºC - 95ºCConstruction:Body: Corzan® PVC-C Seals: FPM Seats: PTFEEnd Connections: Solvent SocketsFeatures: Safe blocked unions, multi-functional handle, easy actuatormounting platform and bracketing points includedOptions: Electric or pneumatic actuation

20 12.8448 54.30 25 12.8468 67.37 32 12.8472 79.59 40 12.8476 107.30 50 12.8480 121.33 63 12.8484 154.21

EPDM SealsPTFE Seats

Praher Type S4 Ball ValveDescription: In-line double union ball valve with lockable handleMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 20mm-63mm 16 barFluid Temperature Range: 5˚C - 95˚CConstruction:Body: PVC-CSeals: EPDM or FPMSeats: PTFEEnd Connections: Solvent SocketsFeatures: Lockable handle and tagging point included


20 12.8449 57.86 25 12.8469 87.56 32 12.8473 103.22 40 12.8477 137.20 50 12.8481 162.04 63 12.8485 193.97

FPM SealsPTFE Seats



3

184


Size Code Price

Size Code Price Size Code Price 20 HO DVK 306 312.52

25 HO DVK 307 339.8632 HO DVK 308 364.48

40 HO DVK 309 489.31 50 HO DVK 310 556.89 63 HO DVK 311 653.38

FPMDiaphragm

Durapipe DV Dialock Diaphragm Valve

MM Solvent Cement Unions

Description: In-line diaphragm valve with position indicatorMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 5ºC - 95ºCConstruction:Body: Corzan® PVC-C Diaphragm: FPMEnd Connections: Solvent Sockets up to 63mm - Solvent Spigots 75, 90 & 110mmOptions: EPDM or PTFE diaphragm; pneumatic actuation

Durapipe TKD 3-Way T-Port Ball ValveDescription: In-line horizontal T-port 3-way ball valve with lockable handleMounting: In any positionMaximum Fluid Pressure at 20˚C: 16 barFluid Temperature Range: 5ºC - 95ºCConstruction:Body: Corzan® PVC-C Seals: FPM Seats: PTFEEnd Connections: Solvent SocketsFeatures: Safe blocked unions, multi-functional handle and easy actuator mounting platformOptions: L-Port; electric or pneumatic actuation

20 H0 TTK 306 196.21 25 H0 TTK 307 212.5032 H0 TTK 308 255.25

40 H0 TTK 309 321.00 50 H0 TTK 310 376.8363 H0 TTK 311 478.71

FPM SealsPTFE Seats


75 H0 VMK 412 888.5690 H0 VMK 413 1001.49

110 H0 VMK 414 1359.44

FPM Diaphragm

MM Solvent Cement Spigots

Durapipe PVC-C ball valves, butterfly valves and diaphragm valves are also available actuated. Please enquire for prices and information.

Actuated Valvesi


3


Size Code Price


185

20 H0 UVK 306 148.56 25 H0 UVK 307 170.4632 H0 UVK 308 208.24

40 H0 UVK 309 273.98 50 H0 UVK 310 394.5363 H0 UVK 311 435.91

FPM Seals

Durapipe RV Y-Type Strainer


Description: In-line sediment strainerMounting: In any positionMaximum Fluid Pressure at 20˚C: 16 barFluid Temperature Range: 5ºC - 95ºCConstruction:Body: Corzan® PVC-C Seals: EPDM or FPM Strainer: Polypropylene 0.6mm mesh (optional Stainless Steel)End Connections: Solvent Sockets

20 H0 SXJ 306 88.96 25 H0 SXJ 307 98.7932 H0 SXJ 308 128.64

40 H0 SXJ 309 188.31 50 H0 SXJ 310 196.5063 H0 SXJ 311 237.19

EPDM Seals

Durapipe SX Easyfit Ball Check Valve


Description: In-line ball check valveMounting: VerticalMaximum Fluid Pressure at 20˚C: 16 barFluid Temperature Range: 5ºC - 95ºCConstruction:Body: Corzan® PVC-C Seals: EPDM End Connections: Solvent SocketsOptions: EPDM seals

20 H0 SXK 306 25 H0 SXK 307 32 H0 SXK 308

40 H0 SXK 309 50 H0 SXK 310 63 H0 SXK 311

FPM Seals


on

application

If you would like to book a visit from the IPS Demo Van, please call:

Let IPS come to you



pvc-c - IPS Flow Systems · 156 about: pvc-c General properties of PVC-C PVC-C is thermally stable...

Documents

Transcript of pvc-c - IPS Flow Systems · 156 about: pvc-c General properties of PVC-C PVC-C is thermally stable...