Push Button Plates - Steven Engineering · form emergency shutdown of equipment or alert personnel...
Transcript of Push Button Plates - Steven Engineering · form emergency shutdown of equipment or alert personnel...
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
10-11PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Push Button Plates
The Edwards Cat. No. 147-1 Push Button Plate is used for mounting
620 and 690 series 5/8" (16mm) buttons on a standard single gang
box. See catalog pages 10-9 and 10-10 for 620 and 690 series push
buttons.
The Edwards Cat. No. 149-1 Push Button Plate is used for mounting
821, 850, and 854 series 7/8" (22mm) buttons on a standard single
gang box. See catalog pages 10-12 and 10-13 for 821, 850, and 854
series push buttons.
Designed for single gang mounting using the mounting holes on
3 9/32" (83mm) centers. Mounting screws furnished.
2 3/4"(79mm)
4 1/2"(114mm)
147-1 & 149-1FEATURES
> Standard switch box mounting
> Stainless steel
D-04
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com10-1
6PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Attractive, high quality weatherproof push button. The push button
has a neoprene diaphragm to protect the integral, long-life, phos-
phor bronze contact springs. The 1786C-B has an additional
bakelite back plate threaded for 1/2" (13mm) conduit.
For exterior use at home, apartment and office.
WeatherproofPush Buttons
1786 Series
For Outdoor Use
Cat No. 1786-B
1 3/16"(30mm)
2 13/32"(61mm)
1 3/8"(30mm)
2 13/32"(61mm)
Cat No. 1786C-B
Conduit FinishCat. No. Back Plate Housing Center
1786-B No Solid Solid
1786C-B Yes Brass Brass
D-0
4
FEATURES
> Surface mount
> Solid brass construction
> Normally open momentarycontacts
SPECIFICATIONS
> Contact rating:12V: 4 amps AC, 4 amps DC24V: 4 amps AC, 2 amps DC48V: 2 amps AC, 1 amp DC
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com14-1
4ADA/HOSPITAL SIGNALING DEVICES
© Copyright 2004 Edwards
Bedside Stations
The Edwards Bedside Station provides emergency call activation.
Calls are placed by pulling one of the attached 6 foot (1.83m) cords.
Cords are replaceable with a standard nylon cord.
Designed for either flush or surface mounting. Unit fits in a stan-
dard single-gang electrical box and plaster cover. For surface
mounting, use a Wiremold surface box. All boxes must have a
minimum depth of 1 3/4" (44mm). Boxes and covers not supplied.
Use in private and semi-private hospital rooms. Use in emergency
stations and patient bath and toilet areas, hospitals, public rest-
rooms, and handicapped areas.
7/8"(22mm)
1 3/8"(35mm)
2 3/4"(70mm)
4 1/2"(114mm)
FEATURES
> 3 maintained contacts
> Stainless steel face plate
> "Emergency" engraved unitsavailable
SPECIFICATIONS
> 3 amps at 125V AC; 0.5 amps at125V DC
7302 Series
Cat. No. Description
7302A Double cord
7302AE Double cord, face plate engraved "Emergency"D-0
4
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
10-21PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Manual EmergencyPull Station
The Catalog No. 78 pull station is a low voltage device used to per-
form emergency shutdown of equipment or alert personnel to dan-
gerous conditions.
For replacement glass rods, order Part No. P-027024.
The 78 may be surface mounted or mounted on a gem box or single
gang plaster cover.
For use in factories to shut down equipment or production lines in
the event of an emergency. Also used to alert personnel to a dan-
gerous condition or to signal personnel evacuation in the event of
an emergency.
2 7/8"(73mm)
1 1/16"(27mm)
4 5/8"(117mm)
78FEATURES
> Break glass type
> Red plastic finish
SPECIFICATIONS
> Contact rating 5.0 amps at 24V AC> Normally open contact
D-04
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com10-1
4PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
WeatherproofPush Button
The 852 flush weatherproof push button features an 850 push but-
ton with a weatherproof diaphragm enclosing the mechanism. The 4
11/16" (119mm) x 2 7/8" (73mm) wall plate has a rubber gasket for
weather tight integrity.
For flush mount, exterior, high voltage use.
2 19/32"(66mm)
4 9/16"(116mm)
1/2"(13mm)
852SYSTEM REQUIREMENTS
> Flush mount
> Satin chrome finish
> High voltage
> Normally open contacts
SPECIFICATIONS
> Contact rating:12V: 10 amps AC, 10 amps DC24V: 10 amps AC, 10 amps DC32V: 10 amps AC, 8 amps DC48V: 10 amps AC, 7 amps DC125V: 6 amps AC, 3 amps DC250V: 3 amps AC, 1 amp DC
> Hole depth: 2 1/16" (52mm)
D-0
4
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com12-6
8FIRE ALARM EQUIPMENT
© Copyright 2004 Edwards
ElectromagneticDoor Holder
The 1501 Series electromagnetic door holder is a high quality device
for use with single doors. The electromagnet assembly is designed
for floor mounting and operates on 24V AC/DC or 120V AC.
The electromagnet is designed to be floor mounted using the sup-
plied floor mounting plate. Field wiring connections are made to the
wiring inside the electromagnet. The catch plate assembly may be
mounted to the door either by through-bolting or by using the con-
cealed surface mounting plate.
Designed to be used on self-closing, swinging doors to automati-
cally isolate an area when activated by fire alarm, smoke detection
or sprinkler systems. Can also be operated by manual control —
wherever the instant closing of doors is necessitated for safety or
for convenience. Hospitals — for stairwell doors, room doors, long
corridors, schools — exit door (closes all doors at once by
pushbutton control); offices (instant privacy by pushing a button on
your desk), nursing homes and public buildings.
The 1501 Series door holder is an auxiliary device designed for ap-
plications that require holding single doors.
1501 Series
Floor Mount, Single Door,Multi-voltage
FEATURES
> Die cast metal construction
> Powder epoxy aluminum finish
> Mounting hardware included
AGENCY APPROVALS
> UL Listed
> FM Approved
SPECIFICATIONS
> 25 lb (11.3kg) minimum holdingforce
ACCESSORIESCat. No. Description
CS2595-5 Catch plate kit - shortCS2598-5 Catch plate kit - long
D-0
4
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
12-69FIRE ALARM EQUIPMENT
© Copyright 2004 Edwards
1 3/4"(44mm)
Door
1 5/8"(41mm)
4 1/2"(114mm)
4 5/8"(117mm)
3 1/4"(83mm)
4 13/16"(122mm)
Catalog Number Volts Amps
1501-AQN5 24V AC* 0.01524V DC 0.015120V AC 0.015
*60Hz
D-04
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com12-7
0FIRE ALARM EQUIPMENT
© Copyright 2004 Edwards
FEATURES
> Die cast metal construction
> Powder epoxy aluminum finish
> Mounting hardware included
AGENCY APPROVALS
> UL Listed
> FM Approved
SPECIFICATIONS
> 25 lb (11.3kg) minimum holdingforce
ElectromagneticDoor Holder
The 1502 Series electromagnetic door holder is a high quality device
for use with double doors. The electromagnet assembly is designed
for floor mounting and operates on 24V AC/DC or 120V AC.
The electromagnet is designed to be floor mounted using the sup-
plied floor mounting plate. Field wiring connections are made to the
wiring inside the electromagnet. The catch plate assembly may be
mounted to the doors either by through-bolting or by using the con-
cealed surface mounting plates.
Designed to be used on self-closing, swinging doors to automati-
cally isolate an area when activated by fire alarm, smoke detection
or sprinkler systems. Can also be operated by manual control —
wherever the instant closing of doors is necessitated for safety or
for convenience. Hospitals — for stairwell doors, room doors, long
corridors, schools — exit door (closes all doors at once by
pushbutton control); offices (instant privacy by pushing a button on
your desk), nursing homes and public buildings.
The 1502 Series door holder is an auxiliary device designed for ap-
plications that require holding double doors.
1502 Series
Floor Mount, Double Door,Multi-voltage
ACCESSORIESCat. No. DescriptionCS2595-5 Catch plate kit - shortCS2598-5 Catch plate kit - long
D-0
4
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
12-71FIRE ALARM EQUIPMENT
© Copyright 2004 Edwards
Catalog Number Volts Amps †
1502-AQN5 24V AC* 0.01524V DC 0.015120V AC 0.015
*60Hz † Values given are per coil. There are two coils in the device.
1 3/4"(44mm)
Door
1 5/8"(41mm)
4 1/2"(114mm)
4 5/8"(117mm)
3 1/4"(83mm)
4 7/8"(124mm)
Armature (one for each door)
D-04
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com12-7
2FIRE ALARM EQUIPMENT
© Copyright 2004 Edwards
ElectromagneticDoor Holder
The 1504 Series electromagnetic door holder is a high quality device
for use with single doors. The electromagnet assembly is designed
for flush wall mounting and operates on 24V AC/DC or 120V AC.
The electromagnet is designed to be flush wall mounted inside a
standard single gang outlet box (not supplied). Field wiring connec-
tions are made to the electromagnet inside the electrical box. The
catch plate assembly may be mounted to the door either by
through-bolting or by using the concealed surface mounting plates.
Designed to be used on self-closing, swinging doors to automati-
cally isolate an area when activated by fire alarm, smoke detection
or sprinkler systems. Can also be operated by manual control —
wherever the instant closing of doors is necessitated for safety or
for convenience. Hospitals — for stairwell doors, room doors, long
corridors, schools — exit door (closes all doors at once by
pushbutton control); offices (instant privacy by pushing a button on
your desk), nursing homes and public buildings.
The 1504 Series door holder is an auxiliary device designed for wall
mount applications that require holding single doors.
FEATURES
> Die cast metal construction
> Powder epoxy aluminum finish
> Mounting hardware included
AGENCY APPROVALS
> UL Listed
> FM Approved
SPECIFICATIONS
> 25 lb (11.3kg) minimum holdingforce
1504 Series
Flush Wall Mount,Multi-voltage
ACCESSORIESCat. No. Description1500-1 1.5" Extension Kit (see pg. 12-67)1500-2 2" Extension Kit (see pg. 12-67)1500-7 7" Extension Kit (see pg. 12-67)1500-12 12" Extension Kit (see pg. 12-67)CS2595-5 Catch plate kit - shortCS2598-5 Catch plate kit - long
D-0
4
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
12-73FIRE ALARM EQUIPMENT
© Copyright 2004 Edwards
Catalog Number Volts Amps
1504-AQN5 24V AC* 0.01524V DC 0.015120V AC 0.015
*60Hz
13/16"(21mm)
4 5/8"(117mm)
2 3/4"(70mm)
2 5/8"(67mm)
1 3/4"(44mm)
D-04
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com12-7
4FIRE ALARM EQUIPMENT
© Copyright 2004 Edwards
FEATURES
> Die cast metal construction
> Powder epoxy aluminum finish
> Mounting hardware included
AGENCY APPROVALS
> UL Listed
> FM Approved
SPECIFICATIONS
> 25 lb (11.3kg) minimum holdingforce
ElectromagneticDoor Holder
The 1505 Series electromagnetic door holder is a high quality device
for use with single doors. The electromagnet assembly is designed
for flush wall mounting and operates on 24V AC/DC or 120V AC.
The electromagnet is designed to be flush wall mounted inside a
standard single gang outlet box (not supplied). Field wiring connec-
tions are made to the electromagnet inside the electrical box. The
catch plate assembly may be mounted to the door either by
through-bolting or by using the concealed surface mounting plates.
Designed to be used on self-closing, swinging doors to automati-
cally isolate an area when activated by fire alarm, smoke detection
or sprinkler systems. Can also be operated by manual control —
wherever the instant closing of doors is necessitated for safety or
for convenience. Hospitals — for stairwell doors, room doors, long
corridors, schools — exit door (closes all doors at once by
pushbutton control); offices (instant privacy by pushing a button on
your desk), nursing homes and public buildings.
The 1505 Series door holder is an auxiliary device designed for wall
mount applications that require holding single doors.
1505 Series
Flush Wall Mount,Multi-voltage
D-0
4
ACCESSORIESCat. No. Description1500-1 1.5" Extension Kit (see pg. 12-67)1500-2 2" Extension Kit (see pg. 12-67)1500-7 7" Extension Kit (see pg. 12-67)1500-12 12" Extension Kit (see pg. 12-67)CS2595-5 Catch plate kit - shortCS2598-5 Catch plate kit - long
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
12-75FIRE ALARM EQUIPMENT
© Copyright 2004 Edwards
Catalog Number Volts Amps
1505-AQN5 24V AC* 0.01524V DC 0.015120V AC 0.015
*60Hz
13/16"(21mm)
4 5/8"(117mm)
1 3/4"(44mm)
2 3/4"(70mm)
1 5/8"(67mm)
D-04
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com12-7
6FIRE ALARM EQUIPMENT
© Copyright 2004 Edwards
FEATURES
> Die cast metal construction
> Powder epoxy aluminum finish
> Mounting hardware included
AGENCY APPROVALS
> UL Listed
> FM Approved
SPECIFICATIONS
> 25 lb (11.3kg) minimum holdingforce
ElectromagneticDoor Holder
The 1508 Series electromagnetic door holder is a high quality device
for use with single doors. The electromagnet assembly is designed
for surface wall mounting and operates on 24V AC/DC or 120V AC.
The electromagnet is designed to be surface wall mounted inside a
standard single gang outlet box (supplied). Field wiring connections
are made to the electromagnet inside the electrical box. The catch
plate assembly may be mounted to the door either by through-bolting
or by using the concealed surface mounting plates.
Designed to be used on self-closing, swinging doors to automatically
isolate an area when activated by fire alarm, smoke detection or sprin-
kler systems. Can also be operated by manual control — wherever the
instant closing of doors is necessitated for safety or for convenience.
Hospitals — for stairwell doors, room doors, long corridors, schools —
exit door (closes all doors at once by pushbutton control); offices (in-
stant privacy by pushing a button on your desk), nursing homes and
public buildings.
The 1508 Series door holder is an auxiliary device designed for wall
mount applications that require holding single doors.
1508 Series
Surface Wall Mount,Multi-voltage
D-0
4
ACCESSORIESCat. No. Description1500-1 1.5" Extension Kit (see pg. 12-67)1500-2 2" Extension Kit (see pg. 12-67)1500-7 7" Extension Kit (see pg. 12-67)1500-12 12" Extension Kit (see pg. 12-67)CS2595-5 Catch plate kit - shortCS2598-5 Catch plate kit - long
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
12-77FIRE ALARM EQUIPMENT
© Copyright 2004 Edwards
Catalog Number Volts Amps
1508-AQN5 24V AC* 0.01524V DC 0.015120V AC 0.015
*60Hz
2 7/16"(62mm)
4 5/8"(117mm)
1 3/4"(44mm)
1 5/8"(67mm)
2 3/4"(70mm)
D-04
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com12-7
8FIRE ALARM EQUIPMENT
© Copyright 2004 Edwards
ElectromagneticDoor Holder
The 1509 Series electromagnetic door holder is a low profile, high
quality device for use with single doors. The electromagnet assembly
is designed for flush wall mounting and operates on 24V AC/DC or
120V AC.
The electromagnet is designed to be flush wall mounted inside a
standard single gang outlet box (not supplied). Field wiring connec-
tions are made to the electromagnet inside the electrical box. The
catch plate assembly may be mounted to the door either by
through-bolting or by using the concealed surface mounting plates.
Designed to be used on self-closing, swinging doors to automati-
cally isolate an area when activated by fire alarm, smoke detection
or sprinkler systems. Can also be operated by manual control —
wherever the instant closing of doors is necessitated for safety or
for convenience. Hospitals — for stairwell doors, room doors, long
corridors, schools — exit door (closes all doors at once by
pushbutton control); offices (instant privacy by pushing a button on
your desk), nursing homes and public buildings.
The 1509 Series door holder is an auxiliary device designed for wall
mount applications that require holding single doors.
1509 Series
Flush Wall Mount,Multi-voltage
FEATURES
> Die cast metal construction
> Powder epoxy aluminum finish
> Mounting hardware included
AGENCY APPROVALS
> UL Listed
> FM Approved
SPECIFICATIONS
> 25 lb (11.3kg) minimum holdingforce
D-0
4
ACCESSORIESCat. No. Description
1500-1 1.5" Extension Kit (see pg. 12-67)1500-2 2" Extension Kit (see pg. 12-67)1500-7 7" Extension Kit (see pg. 12-67)1500-12 12" Extension Kit (see pg. 12-67)CS2595-5 Catch plate kit - shortCS2598-5 Catch plate kit - long
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
12-79FIRE ALARM EQUIPMENT
© Copyright 2004 Edwards
Catalog Number Volts Amps
1509-AQN5 24V AC* 0.01524V DC 0.015120V AC 0.015
*60Hz
7/32"(5mm)
4 5/8"(117mm)
1 3/4"(44mm)
1 5/8"(67mm)
2 3/4"(70mm)
D-04
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
10-25PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Door Openers
The Catalog 150 and 151 mortise door openers are dependable long
service devices, providing the security and convenience of remote
control door-lock operation. These units are flush mounted in place
of the regular door strike plates. The door remains locked until the
opener is electrically actuated by a remote contact device. For AC
models, use with a 592 Transformer. See page 11-2.
For use in apartments, offices, banks, industrial buildings, schools,
and institutions. Use in door interlocking and control systems with
timed or manual operation.
1 1/4"(32mm)
1 5/8"(41mm)
4 7/8"(124mm) 1 17/32"
(39mm)
4 1/8"(105mm)
3 3/8"(86mm)
3/32"(2mm)
4 3/8"(111mm)
1 5/8"(41mm)
1 1/4"(32mm)
1 9/16"(40mm)
150 & 151 Series
Easy to install
Fits left and right hand doors
Rugged, heavy duty construction
For use in hollow metal jambs
Cat. No. Voltage Amps Finish
150-G1 24V DC .20 Painted brass faceplate150-G5 24V AC .42 with chrome nosing
151-G1 24V DC .20 Brushed Chrome151-G5 24V AC .42
D-04
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
10-15PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
WeatherproofPush Button
The 1785 weatherproof push button is constructed of a cast alumi-
num rim with a composition diaphragm center. The unit is drilled
and tapped for 1/2" (13mm) conduit and has a gray aluminum finish.
The push button is fitted with two side mounting lugs.
For exterior use. Typical applications include use in push button
panels, school signaling, machine start and stop, entrance pushes,
and industrial signaling. Also used in the trucking industry and
OEMs.
3 29/32"(99mm)
3 3/32"(79mm)
2 15/16"(75mm)
3 1/32"(77mm)
2 3/16"(56mm)
1785FEATURES
> Surface mount
> Heavy die-cast construction
> Normally open contacts
SPECIFICATIONS
> Contact rating:12V: 20 amps AC, 20 amps DC24V: 20 amps AC, 10 amps DC125V: 4 amps AC, 1 amp DC
D-04
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com10-1
0PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Low VoltageIndustrial Push Buttons
Low voltage, panel mount push buttons with three types of centers:
recessed, flush, or protruding. Each button has a phosphor bronze
contact spring with a long duration wiping action. The button back
is constructed of Zytel 101 nylon.
Used for push button panels, on industrial and commercial ma-
chines, and on OEM equipment. Use wherever an extra long life,
high quality, low voltage push button is needed. May be used with
Cat. No. 147-1 mounting plate (page 10-11).
Cat. No.691
Cat. No.692
Panel Mount
690 Series
Cat No. 690-W,692-W, and 691-W
Cat No. 694-B,694-W, 695-B, and 695-W
5/16"(8mm)
3/4"(31mm)
1 7/32"(25mm)
1/8"(3mm)
3/4"(19mm)
1"(25mm)
Cat. No. 694
Cat. No. 695
FEATURES
> AC or DC up to 50 volts
> Polished, anodized aluminumshell
> Snap fit or locknut type mounting
SPECIFICATIONS
> Contact ratings:12V: 10 amps AC, 4 amps DC24V: 10 amps AC, 2 amps DC48V: 5 amps AC, 1 amp DC
> Mounting hole dia: 5/8" (16mm)
> Normally open momentarycontacts
Center CenterCat. No. Mounting Type Color
690-W Snap fit Flush White691-W Locknut Flush White692-W Snap fit Recessed White694-B Snap fit Protruding Black694-W Snap fit Protruding White691-W Locknut Flush White695-B Locknut Protruding Black695-W Locknut Protruding WhiteD
-04
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com10-1
2PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
High VoltagePush Buttons
The Catalog 820 and 821 are rugged, fast break contact push but-
tons that operate regardless of how pressure is released. The Cata-
log 821 is ideal for mounting on thin metal panels.
Ideal for AC circuits where quick make is not a factor. The 821 may
be used with 149-1 mounting plate. See page 10-11.
7/8"(22mm)
2 1/32"(52mm)
15/32"(12mm)5/16"
(8mm)
Cat. No. 820
Cat. No. 821 820 & 821FEATURES
> Force fit (Cat. No. 820)
> Locknut mounting (Cat. No. 821)
> Convenient screw terminals
> Normally open contacts
> Chrome plated, heavy duty shellwith black center
AGENCY APPROVALS
> UL Recognized
SPECIFICATIONS
> Rated at 250,000 operations at 1amp, 125V
> Cat. 820 hole dia: 3/4" (19mm)
> Cat. 821 hole dia: 7/8" (22mm)
> Hole depth: 1 3/4" (44mm)
> Contact rating:12V: 15 amps AC24V: 15 amps AC48V: 10 amps AC125V: 5 amps AC250V: 5 amps AC
D-0
4
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
10-13PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
High VoltagePush Buttons
Cat No. 850 & 854 push buttons are rugged, fast make and break
contact push buttons that operate regardless of how pressure is ap-
plied or released. The buttons have insulated, protective sleeves
and phosphor bronze, self cleaning contacts that withstand shock
and vibration.
Both push buttons panel mount in a 7/8" (22mm) hole using the
supplied locknut. Also mounts in a 7/8" (20mm) hole that has been
tapped with straight pipe threads. Required hole depth is 1 3/4"
(44mm).
Use for high voltage AC or DC circuits. May be used with 149-1
mounting plate. See page 10-11.
1 1/8"(29mm)
2"(51mm)
3/8"(10mm)
850 & 854FEATURES
> Locknut mounting
> Convenient screw terminals
> Cat. No. 850 - has normally opencontacts
> Cat. No. 854 - normally closedcontacts
> Chrome plated, heavy duty shellwith black center
AGENCY APPROVALS
> Cat. No. 850 UL Recognized
SPECIFICATIONS
> Cat. no. 850 contact rating:12V: 15 amps AC24V: 15 amps AC48V: 10 amps AC125V: 5 amps AC250V: 5 amps AC
> Cat. no. 854 contact rating:12V: 4 amps AC, 4 amps DC24V: 4 amps AC, 4 amps DC48V: 4 amps AC, 2 amps DC125V: 2 amps AC, 1 amp DC250V: 1 amp AC, 0.5 amps DC
D-04
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com10-3
2PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Brushed aluminum and lacqueredfaceplate and nosing
Easy to install
Fits left or right hand doors
Rugged, heavy duty construction
For use in wood jambs
Door Opener
The Catalog Number 9E mortise door opener is a dependable long
service device, providing the security and convenience of remote
control door-lock operation. This unit is flush mounted in place of
the regular door strike plate. The door remains locked until the
opener is electrically actuated by a contact device. For AC opera-
tion, use with an 88-50, 596 or 598 Transformer. See pages 11-2
and 11-5.
For use in apartments, offices, banks, industrial buildings, schools,
and institutions. Use in door interlocking and control systems with
timed or manual operation.
9E
Cat. No. Voltage Amps Transformer
9E 4 - 6V DC 1.3 - 2.7 —
8 - 12V AC 12V tap of88-50 or 596
9G5 24V AC 1.4 598
1 1/4"(32mm)
5 7/8"(149mm)
1 3/8"(35mm)
5 3/8"(137mm)
1 19/32"(41)1/8"
(3mm)
15/16"(24mm)
3 21/32"(93mm)
D-0
4
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
10-7PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Low Voltage -High AmperagePush Button
Low voltage, high amperage push button designed for 3/4" (19mm)
hole force fit. Flat white button center prevents accidental opera-
tion.
Use wherever a low voltage, high amperage, economical push but-
ton is required.
1"(25mm)
25/32"(20mm)
59FEATURES
> Snap fit for 3/4" (19mm) hole
> Normally open momentarycontacts
AC DC Finish Hole HoleCat. No. Volts Amps Amps Rim Center Size Depth
12 8.0 8.0 Polished 3/4" 11/16"
59 24 6.0 4.0 Nickel White (19mm) (17mm)
48 3.0 2.0
D-04
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
10-23PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Magnetic Switches
Edwards magnetic switches are designed to activate a variety of
signaling devices. Normally open circuits close when the magnet
engages. SPDT switches are for open circuit systems or for central
office operation. Normally closed circuits open when the magnet
engages. For accessories, see Magnetic Switch Accessories, page
10-24.
Used for commercial, industrial, and residential burglar alarm sys-
tems.
2 1/8"(54mm)
2 17/32"(64mm)
11/16"(17mm)
17/32"(13mm)
FEATURES
> Normally open , normally closedor SPDT switches available
Cat. No. 63 magnetic switch issupplied complete with 66-WInsulating Spacer, 67W TerminalCover, and mounting hardware
60 Series
Cat. No. Description Color Rating
60 Normally Open Switch Gray 100 V, 50 mA
61 SPDT Switch Gray 30 V, 250 mA
62 Normally Closed Switch Gray 30 V, 250 mA
63 Normally Open switch White 100 V, 50 mA
64 SPDT Switch White 30 V, 250 mA
65 Normally Closed Switch White 30 V, 250 mA
D-04
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
10-27PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Painted brass faceplate andnosing
Fits left and right hand doors
Easy installation
Rugged, heavy duty construction
For use in wood jambs and gatingsystems
Door Opener
154 Series
The Catalog 154 mortise type door opener is a dependable long ser-
vice device, providing the security and convenience of remote con-
trol door-lock operation. This unit flush mounts in place of the regu-
lar door strike plate and will withstand 35 lb (15.88 kg) nosing pres-
sure. The door remains locked until the opener is electrically actu-
ated by a remote contact device. For AC models, use with either an
88-50, 596, or 592 Transformer. See below table and Transformer
Catalog Pages 11-2 and 11-5.
For use in apartments, offices, banks, industrial buildings, schools,
and institutions. Use in door interlocking and control systems with
timed or manual operation.
1 3/8"(35mm)
3 1.2"(89mm)
3"(76mm)
1 1/2"(38mm)
2 3/4"(70mm)
3/32"(2mm)
15/16" (24mm)
1 13/16"(46mm)
Cat. No. Voltage Amps Transformer
154-AD 4 - 6V DC 1.3 - 2.7 —
8 - 16V AC 598
154-G1 24V DC .19 —
154-G5 24V AC 1.4 599
D-04
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com10-2
8PUSH BUTTONS & CONTACT DEVICES
Door Openers
The Catalog 177 and 178 mortise type door openers are dependable
long service devices, providing the security and convenience of re-
mote control door-lock operation. These units flush mount in place
of the regular door strike plate and are ideal for narrow door stiles.
With the non-reverse acting units, the door remains locked until the
opener is electrically actuated by a remote contact device. For re-
verse acting units, the door remains unlocked (with current off).
When energized through a timer or manual switch, the unit keeps
the door locked.
For AC operation, use with either an 88-50, 596, or 592 Transformer.
See below table and Transformer Catalog Pages 11-2 and 11-5.
For use in apartments, offices, banks, industrial buildings, schools,
and institutions. Use in door interlocking and control systems with
timed or manual operation.
Continuous Duty Operation
The 177-RG5 and 178-RG5 are suitable for continuous duty opera-
tion. However, when operated from 24V AC, they must be con-
nected through the Catalog No. SR-1 Silencing Assembly. They
may also be operated directly from 24V DC.
177 & 178 Series
Fits left and right hand doors
Easy installation
Rugged, heavy duty construction
For use in wood and metal jambs
© Copyright 2004 Edwards
D-0
4
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
10-29PUSH BUTTONS & CONTACT DEVICES
15/16"(24mm)
3 21/32"(93mm)
Cat. No. Description Voltage Amps Transformer Finish
177-AF Non-reverse 4 - 6V DC 1.3 - 2.7 — Painted brass
acting 8 - 16V AC 12V tap of 88-50 or 596 faceplate
177-G5 Non-reverse acting 24V AC 1.4 24V tap of 88-50 or 599 with chrome
177-G1 Non-reverse acting 24V DC .19 — nosing
177-RG5* Reverse acting 24V DC .19 24V tap of
Continous duty 88-50 or 592
178-AF Non-reverse 4 - 6V DC 1.3 - 2.7 —
acting 8 - 16V AC 12V tap of Satin chrome
88-50 or 596 faceplate
178-G5 Non-reverse acting 24V AC 1.4 24V tap of 88-50 or 599 and nosing
178-G1 Non-reverse acting 24V DC .30 —
178-RG5* Reverse acting 24V DC .19 24V tap of
Continuous duty 88-50 or 592
*SR-1 Silencing Assembly (rectifier) required with AC transformers on reverse action openers. 1 1/4" (32mm) square.
1 1/4"(32mm)
5 7/8"(149mm)
1 3/8"(35mm)
5 3/8"(137mm)
1/8"(3mm)
© Copyright 2004 Edwards
D-04
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com10-3
0PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
4 7/8"(124mm)
1 5/8"(41mm)
1 1/4"(32mm)
4 1/8"(105)
1 1/2"(38mm)
3/32"(2mm)
3 11/32"(85mm)
2 13/16"(71mm)
1 13/16"(46mm)
15/16"(24mm)
Door Openers
The 180 and 181 Series mortise type door openers are dependable
long service devices, providing the security and convenience of re-
mote control door-lock operation. These units are used with cylin-
drical, bored type locksets and conform to ANSI specifications for
steel door frames. The door remains locked until the opener is elec-
trically actuated by a contact device. For AC operation, use with
either an 88-50 or 596 Transformer. See pages 11-2 and 11-5. For
use in apartments, offices, banks, industrial buildings, schools, and
institutions. Use in door interlocking and control systems with
timed or manual operation.
180 & 181 Series
D-0
4
Cat. No. Voltage Amps Transformer Finish
180-AF 4 - 6V DC 1.3 - 2.7 — Painted brass faceplate8 - 16V AC 12V tap of 88-50 or 596 with chrome nosing
181-AF 4 - 6V DC 1.3 - 2.7 — Satin chrome8 - 16V AC 12V tap of 88-50 or 596 faceplate and nosing
Fits left and right hand doors
Easy installation
Rugged, heavy duty construction
For use in wood and hollow metaljambs
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
10-31PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Door Opener
The Catalog Number 188 mortise type door opener is a dependable
long service device, providing the security and convenience of re-
mote control door-lock operation. The door remains locked until the
opener is electrically actuated by a contact device. For AC opera-
tion, use with an 88-50, 596 or 598 Transformer. See Transformer
Catalog Pages 11-2 and 11-5.
For use in apartments, offices, banks, industrial buildings, schools,
and institutions. Use in door interlocking and control systems with
timed or manual operation.
188
Satin zinc faceplate and nosing
Fits left and right hand doors
Easy installation
Rugged, heavy duty construction
For use in wood and hollowaluminum jambs
Cat. No. Voltage Amps Transformer
188-AF 4 - 6V DC 1.3 - 2.7 —8 - 16V AC 12V tap of
88-50 or 596
1 3/4"(44mm)
1 7/16"(37mm)
7 15/16"(202mm)
1 3/8"(35)
7 7/16"(189mm)
2 7/8"(73mm)
3 21/32"(93mm)
15/16"(24mm)
1 19/32"(41mm)
3/16"(5mm)
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
10-33PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
D-04
The Cat. No. 502A and 503A electric door switches are available as
either normally open or normally closed units. The switch mounts
using the mounting holes on 3 1/4" (83mm) centers.
The Cat. No. 501A-G may be wired either normally open or normally
closed (shipped normally closed). The switch mounts using the
mounting holes on 3" (76mm) centers.
Use for closet doors, dark rooms, and walk-in refrigerators. May be
used on either sliding or hinged doors.
Cat. No. Description
501A-G*** May be wired NO or NC
502A* Depress plunger to open circuit (normally closed)
503A** Depress plunger to close circuit (normally open)
*For Replacement Switch, order P-047570-0919**For Replacement Switch, order P-047570-0920***Order appropriate NC or NO switch as above two notes.
Door Light Switches
501A-G, 502A & 503A
All purpose electric door switch
Normally open or normally closedswitches available
501A-G may be wired eithernormally open or normally closed
Painted gold faceplate
Face plate for 502A & 503A: 4"(102mm) H x 1 1/2" (38mm) W
Face plate for 510A-G: 3 7/8"(98mm) H x 1 1/4" (32mm) W
Switch: 2 15/16" (75mm) H x1 11/32" (34mm) W x 1 3/4"(44mm) deepUL Component Recognized
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
10-9PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Low VoltageIndustrial Push Buttons
Low voltage, panel mount push buttons with large terminals. Avail-
able with an illuminated center for use in unlighted areas.
Use for low voltage, low cost, industrial and commercial applications
requiring long life. May be used with the Cat. No. 147-1 mounting plate
(page 10-11) or 147-10 room annunciator mounting plate (page 14-8).
620 Series
Panel Mount
FinishCat. No. Volts Rim Center
620 8V AC or DC Chrome Ivory621* 24V AC or DC620-B 48V AC or DC Brass Ivory621-B*
620-L 6-16 V AC Chrome Lighted Ivory620-LB Brass Lighted Ivory*500 unit bulk pack
Polished chrome or brass
Insulated for mounting on metalcabinets
Snap fit
Contact ratings:8V: 2 amps AC, 2 amps DC24V: .67 amps AC, .5 amps DC48V: .3 amps AC, .3 amps DC
Mounting hole dia: 5/8" (16mm)
Mounting hole depth: 3/4" (19mm)
Normally open momentarycontacts
D-04
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com10-6
PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Deluxe Low VoltagePush Button
Polished housings with exclusive, patented piano-action design that
requires only the slightest touch. This modern, slim design can be
easily installed in minutes.
For home, apartment, office, and OEMs. Use wherever low volt-
age, economical remote control is required.
656
Finish DimensionsCat. No. Style Housing Center W H D
656-B Illuminated Anodized Brass White 15/16" 2 11/16" 9/16"
656-C Rectangular Anodized Aluminum White (24mm) (68mm) (14mm)
FEATURES
> Surface mounted
> Continuously illuminated
> Piano type action
SPECIFICATIONS
> Voltage: 6 to 16V AC
> Normally open momentarycontacts
Illuminated
D-0
4
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com10-2
PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Low VoltagePush Button
Attractive, traditional push button designed for long service.
Use for home, apartment and office.
600 & 603
D-0
4
FEATURES
> Surface mounted, round
> Solid brass construction
> Large accessible terminals
SPECIFICATIONS
> Voltage: up to 48V AC
> Normally open momentarycontacts
Finish DimensionsCat. No. Style Housing Center Diameter Depth
600 Non-illuminated Satin Black 2 5/16" 7/8"Round Brass (59mm) (22mm)
603 Non-illuminated Satin Black 1 3/4" 11/16"Round Brass (44mm) (17mm)
Cat. No. 600
Cat. No. 603
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
10-3PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
D-04
Low VoltagePush Buttons
Attractive, traditional push buttons in a single stamped plate. De-
signed for long service.
Use for homes, apartments and offices.
Cat. No. 602 Cat. No. 602-L Cat. No. 605
Finish DimensionsCat. No. Style Housing Center W H D
602 Non-illuminated Satin Black 2" 4 9/16" 3/4"Rectangular Brass (51mm) (116mm) (19mm)
602-L Illuminated Brass White 1 7/16" 5 1/4" 5/8"Rectangular (37mm) (133mm) (16mm)
605 Non-illuminated Satin Black 1 5/8" 7" 7/8"Rectangular Brass (41mm) (178mm) (22mm)
FEATURES
> Surface mounted
> Solid brass construction
> Large accessible terminals
> Dual buttons (602 Series)
> Two name card holders (602Series)
> Three buttons (605 Series)
> Three name card holders (605Series)
SPECIFICATIONS
> Voltage: up to 48V AC (Cat. No.602 and 605); up to 16V AC (Cat.No. 602-L)
> Normally open momentarycontacts
602 & 605
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com10-2
6PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Door Opener
The Catalog 152 rim type door opener is a dependable long service
device, providing the security and convenience of remote control
door-lock operation. The door remains locked until the opener is
electrically actuated by a remote contact device. For AC models,
use with either a 598 Transformer. See below table and Transformer
Catalog Page 11-2
For use in apartments, offices, banks, industrial buildings, schools,
and institutions. Use in door interlocking and control systems with
timed or manual operation.
152 Series
Brass nosing
Easy surface installation
Rugged, heavy duty construction
For surface mount installations
Used in control systems andnight latches
Cat. No. Voltage Amps Transformer
152-AE 4 - 6V DC 1.3 - 2.7 —
8 - 16V AC 590
152-G1 24V DC .19 —
152-G5 24V AC 1.40 599
2 1/8"(54mm) 1 7/16"
(37mm)
3/4"(19mm)
7/32"(6mm)
1 3/16"(30mm)
3 11/32"(85mm)
2 3/4"(70mm)
D-0
4
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com10-8
PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Multiple Contact LowVoltage - High AmperagePush Buttons
The Catalog 250 is a low voltage, high amperage push button de-
signed for simultaneous operation of two or three devices from one
central point.
The Catalog 255 is a low voltage, high amperage push button de-
signed for use where the simultaneous breaking of one circuit and
the making of another is required.
Use wherever a low voltage, high amperage, economical push but-
ton are required.
Cat. No 250 Contact Arrangement Cat. No. 255 Contact Arrangement
FEATURES
> Fully insulated
Multiple contacts
250 & 255
AC DC Finish Hole HoleCat. No. Volts Amps Amps Rim Center Size Depth
12 6.0 2.0 Polished 3/4" 1 1/16"250 24 4.0 1.0 Nickel Black (19mm) (27mm)
48 2.0 0.5
12 6.0 2.0 Polished 3/4" 1 1/16"255 24 4.0 1.0 Nickel Black (19mm) (27mm)
48 2.0 0.5
D-0
4
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com10-2
4PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Magnetic SwitchAccessories
Edwards magnetic switches are designed to activate a variety of
signaling devices. The following accessories can be used to func-
tionally augment these switches.
Edwards magnetic switches are used for commercial, industrial,
and residential burglar alarm systems.
Cat. No. 66
Cat. No. 67
Cat. No. 68
Magnetic switch insulatingspacers, terminal covers, andmounting brackets
66, 67 & 68
Cat. No. Color Description
66-G Gray Insulating Spacer 1/8" (3mm) thick66-W* White Interlocks into switch
67G Gray Terminal Cover67W* White Protects terminals from tampering
68 Mounting BracketFor unusual or mortised applications
*Supplied with Cat. No. 63 Magnetic Switch
D-0
4
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com10-2
0PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Rolling Ball Contactors
The Catalog 44, 45 and 46E rolling ball contactors are insulated,
rugged devices that operate from pressure in any direction. Instal-
lation requires no mortise.
For use on doors, windows, transoms, burglar alarms, and machin-
ery. The Cat. No. 46E is ideal for applications where a momentary
contact is desired such as door chime entry applications.
44, 45 & 46E
Hole HoleCat. No. Description Diameter Depth
44 Push to open contacts
45 Push to close contacts 13/16" 1 1/8"
46E Push to make then break (21mm) (29mm) and repeat on return
FEATURES
> Fast installation
> Low voltage
SPECIFICATIONS
> Contact rating:12V: 2 amps AC, 2 amps DC24V: 2 amps AC, 1 amp DC48V: 1 amp AC, 0.5 amps DC
D-0
4
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
12-67FIRE ALARM EQUIPMENT
FEATURES
> Two models
> Adjustable from 6 3/8" to 12"
> Employs existing mountinghardware
> Supplied complete with allnecessary allen wrenches
> Powder epoxy aluminum finish
> Mounting hardware included
SPECIFICATIONS
> Cat. No. 1500-7 extension range:6.37" (162mm) to 8" (203mm)*
> Cat. No. 1500-12 extension range:8.37" (213mm) to 12" (305mm)*
* Extension ranges listed are from door to tip ofcatch plate using small armature. Consult eachdoor holder for specific dimensions as eachone mounts differently.
Door HolderExtension Rods
1500 Series
The Edwards 1500 Series Door Holder Extension Rods are for use
where it is desired to hold doors open and where a standoff distance
between the magnet assembly and the armature base is required.
The extension kit can be used with Edwards 1504, 1505, 1508 and
1509 series door holders.
Catch plate (supplied with door holder)
#10-32 UNF nut (supplied)
(2) Flat washers (supplied)
(2) Spherical bushings(supplied)
Knurled locking nut
#10-32 UNF x 1" (25mm)screw (supplied)
Extension tube assembly
(2) Spherical bushings (supplied)
Armature base (supplied with door holder)
#10-32 x 1 1/2" (38mm)armature securing screw(supplied with door holder)
ORDERING INFORMATIONCat. No. Description
1500-1 1.5" Extension Kit1500-2 2.0" Extension Kit1500-7 5.25 to 7.5" Extension Kit1500-12 7.5" to 12" Extension Kit
Cat. No. Door to Wall Distance Description
1504 3 7/16" Employs long armature base.
1505 2 7/16" Employs small armature base
1508 4 1/16" Employs small armature base & surface mount back box
1509 1 27/32" Employs small armature base
Adjustable Extensions
© Copyright 2004 Edwards
D-04
Adjustable 1500-12 shown
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com10-2
2PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Door Trip
The Catalog 236 door trip is a low voltage contact device for exter-
nal mounting. The device makes and breaks as the door opens.
Signals door entry into stores, offices, etc.
236FEATURES
> Non insulated
> Low voltage
> Zinc plated
SPECIFICATIONS
> 48 Volts max.
> 1 1/4" (32mm) L x 1 5/16"(33mm) W x 3 1/4" (83mm) D
D-0
4
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
10-17PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Pendant Push Button
The Edwards 71 Push Button is a pendant type button. It is small,
yet easy to grasp, and is contained within a tough plastic case.
For use in hospitals, institutions, and OEMs where a locking push
button is not required.
71FEATURES
> Gray Rim
> Ivory center
> Low voltage - up to 50 volts
SPECIFICATIONS
> 8 volts, 2.0 amps; 24 volts, .67amps
> Dimensions: 1 1/2" (38mm) longx 1" (25mm) wide
> Wire entrance diameter: 7/32"(6mm)
> Normally open momentarycontacts
D-04
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com10-1
8PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Pendant Push Button
The Edwards 851 Push Button is a high voltage pendant type button.
Its shell is constructed out of shock resistant polypropylene. The
pendant will fast make and break regardless of how pressure is ap-
plied.
For use in hospitals, institutions, and OEMs where a fast make and
break push button is required.
851
Cat. AC DC Finish DimensionsNo. Type Volts Amps Amps Rim Center Length Width
851 Pendant 12 10.0 10.0 Gray Black 3 3/8" 1 9/16"
24 10.0 10.0 (86 mm) (40 mm)
32 10.0 8.0
48 10.0 7.0
125 6.0 3.0
250 3.0 1.0
FEATURES
> Quick make and break
> Rugged construction
> High voltage - up to 250 volts
SPECIFICATIONS
> Vibration resistant phosphorbronze, self cleaning contacts
> 6" (152mm) No. 16 pigtail leads
> Wire entrance diameter: 11/32"(9mm)
> See Table
D-0
4
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com10-4
PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Low VoltagePush Buttons
Patented piano-action design requires only the slightest touch. This
modern, slim design can be easily installed in minutes.
For home, apartment, office, and OEMs. Use wherever low volt-
age, economical remote control is required.
630, 630L, 631 & 632LFEATURES
> Surface mounted
> Piano type action
> Plastic case - rust proof
SPECIFICATIONS
> 630 & 631 non-illuminated pushbuttons voltage: up to 48V AC
> 630L illuminated push buttonvoltage: up to 16V AC
> 632L illuminated push buttonvoltage: up to 16V AC
> Normally open momentarycontacts
Finish DimensionsCat. No. Style Housing Center W H D
630 Non-illuminated Brown Ivory 7/8" 2 7/8" 5/8"
630L Illuminated Brown Ivory (22mm) (73mm) (16mm)
631 Non-illuminated Ivory Ivory
632L Illuminated Chrome Ivory 7/8" 2 7/8" 5/8"
(22mm) (73mm) (16mm)
Plastic Rust Proof Case,Illuminated & Non-Illuminated
Cat. No. 630, 630L Cat. No. 632L
D-0
4
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
10-5PUSH BUTTONS & CONTACT DEVICES
© Copyright 2004 Edwards
Low VoltagePush Buttons
Exclusive, patented piano-action design that requires only the
slightest touch. This modern, slim design can be easily installed in
minutes.
For home, apartment, office, and OEMs. Use wherever low volt-
age, economical remote control is required.
634, 635 & 636
Finish DimensionsCat. No. Style Housing Center W H D
634 Non-illuminated Brown Ivory 3/4" 2 5/8" 3/4"
635 Rectangular Ivory Black (19mm) (67mm) (19mm)
636 Ivory Ivory
Plastic Rust Proof Case
FEATURES
> Surface mounted
> Piano type action
> Plastic case - rust proof
SPECIFICATIONS
> Voltage: up to 48V AC
> Normally open momentarycontacts
D-04