PUNCHING MACHINES - OEMME SPA
8
www.oemmespa.com PUNCHING MACHINES
Transcript of PUNCHING MACHINES - OEMME SPA
ww
w.o
emm
espa
.com
PUNCHING MACHINES
Casements
Head office and ProductionVia F. L. Ferrari, 23
44100 FERRARA - ITALYTel. 0532.777411Fax 0532.777444
Sales office ItalyVia Cavallotti, 16
42010 REGGIO EMILIA - ITALYTel. 0522.271275Fax 0522.923879
Export DepartmentVia F. L. Ferrari, 23
44100 FERRARA - ITALYTel. +39.0532.777418Fax [email protected]
The Company can make modificatio
ns and
improvem
ents with
out p
revious advise
g
MOD. PUN
ZONA
TRICI U
K 01
09
PUNCHING MACHINES
Flexible and economical working tools which have replaced the oldworking systems such as chip removal machines or large pressesequipped with cutting tools
Projected and built adjusting thrust, structure and working way accor-ding to the real needs of the customer
The vertical models achieved a very high machining accuracy with alow tool wear thanks to an exclusive four-column guide system
Workable systems
Sliding Curtain Walls Balconies Shutters
Curtain wall transomspunching for mullionsjoining
Special uses and accessories
Curtain wall mullionspunching
Corner cut and han-ging slots punchingfor compositepanels
Single and double bench Jigs and milling cutters
Vertical
Available models and technical details
Horizontal For corner joints Portable
- Thrust: 19000 N (P20 version)13000 N (P16 version)
- Weight: 60 – 120 Kg
- Thrust: 19000 N (P20 version)13000 N (P16 version)
- Weight: 60 – 120 Kg
- Thrust: 6000 N - Weight: 5 - 6 Kg
- Thrust: 11000 N - Weight: 4 - 5 Kg
MAC005P - MAC006P
PUNCHING MACHINE FOR KIT ASSEMBLY
MAC005P - MAC006PPUNCHING MACHINE FOR KIT ASSEMBLY
Universal punching machine suitable for any system usually workable with Oemme punching tools(casement, sliding, curtain wall, shutters etc…)Working stroke adjusting system according to the operation to be performedReduction of the production costs thanks to the use of a single punching machine for all the systemsworkedReduction of the equipment updating costs and time with reference to the system changesSystem for the substitution of the kitsThe working of a different system takes place through the substitution of the kits, and no additionalequipment is required.In order to assemble the kit, introduce them in the fixing pin and block it through a simple rotation(1/4 of turn)of the ‘blocking screw.This system allows to tighten the basement of the stamp to the press structure and the punchesholder to the upper mobile plate.
Technical details- Thrust: 2,5 ton at 7 bar- Cylinder stroke: min 0 mm max 40 mm- Cylinder stroke adjustment by means of screw with quotareading on metric rule
- No. of kit installing seats: 8 on the bottom, 4 on the top (No. 2 additional side seats on the version MAC006P)- Basement turning device- Quick kit assembly / disassembly system with screw blocking
MAC007P
PUNCHING MACHINE FOR KIT ASSEMBLY
MAC007PPUNCHING MACHINE FOR KIT ASSEMBLY
Universal punching machine suitable for any system usually workable with Oemme punching tools(casement, sliding, curtain wall, shutters etc…)Reduction of the production costs thanks to the use of a single punching machine for all the systemsworkedReduction of the equipment updating costs and time with reference to the system changesSystem for the substitution of the kitsThe working of a different system takes place through the substitution of the kits, and no additionalequipment is required.In order to assemble the kit, introduce them in the fixing pin and block it through a simple rotation(1/4 of turn)of the ‘blocking screw.This system allows to tighten the basement of the stamp to the press structure and the punchesholder to the upper mobile plate.
Technical details- Trust: 2,0 ton at 7 bar- No. of kit installing seats: 2 on the bottom, 2/3 on the top- Quick kit assembly / disassembly system with screw blocking
MAC008PPUNCHING MACHINE FOR KIT ASSEMBLY
MAC008PPUNCHING MACHINE FOR KIT ASSEMBLY
Universal punching machine suitable for any system usually workable with Oemme punching tools(casement, sliding, curtain wall, shutters etc…)Reduction of the production costs thanks to the use of a single punching machine for all the systemsworkedReduction of the equipment updating costs and time with reference to the system changesSystem for the substitution of the kitsThe working of a different system takes place through the substitution of the kits, and no additionalequipment is required.In order to assemble the kit, introduce them in the fixing pin and block it through a simple rotation(1/4 of turn)of the ‘blocking screw.This system allows to tighten the basement of the stamp to the press structure and the punchesholder to the upper mobile plate.
Technical details- Trust: , ton at 7 bar- N op- Quick kit assembly / disassembly system with screw blocking
1 3o. of kit installing seats: 1 on the bottom, 1 on the t
