Pump Seal Kits - Conair€¦ · 1.800.458.1960 66 US 8004581960 • International 1 814436861 •...
Transcript of Pump Seal Kits - Conair€¦ · 1.800.458.1960 66 US 8004581960 • International 1 814436861 •...
-
65
WWW.CONAIRGROUP.COM 1.800.458.1960
US 800.458.1960 • International +1 814.437.6861 • Email [email protected]
Pump Seal Kits For Water Pumps and MicroKool Chillers
Part Number Pump Type Description
09000358 12CS 5/8" EPDM Carbide/Carbide up to 300° F
09000359 50CS 1-1/2" EPDM Carbide/Carbide up to 300° F
09000751 11C, 12C 5/8" EPDM Silicon up to 250° F
09000752 50C 1-1/2" EPDM Silicon up to 250° F
09000851 55F-20 Hp, 56F-20 and 25 Hp 1-3/4" BUNA Ceramic up to 180° F
09001488 50, 52, 54F, 55F-10 Hp, 56F-15 Hp 1-1/2" BUNA Ceramic up to 180° F
09003085 15, 16 - 1-1/2 and 2 Hp, 18 1-1/2" BUNA Ceramic up to 180° F
09003262* 11, 16 - 1/3 through 2 Hp* 5/8" BUNA Ceramic up to 180° F
09003271 63 1-3/4" BUNA Ceramic up to 180° F
09003324 57 1-3/4" BUNA Ceramic up to 180° F
09003406 62 1-1/2" BUNA Ceramic up to 180° F
09003407 96 1-3/4" BUNA Ceramic up to 180° F
09003408 102 1-3/4" BUNA Ceramic up to 180° F
09003409 103 1-3/4" BUNA Ceramic up to 180° F
09003416 68, 69 5/8" EPDM Silicon Carbide up to 250° F
Note: Seal kits include nut, flinger, case gasket, washer, seal and lubrication.
Depending on seal kit ordered it may also include shaft sleeve, impeller retainer, key, o-ring, and seal retainer.
* Pump Type 16: 1/3 through 2 Hp for microKool chillers only.
Pump Seal Kit
-
1.800.458.1960 WWW.CONAIRGROUP.COM
66 US 800.458.1960 • International +1 814.437.6861 • Email [email protected]
Pump Seal Kits (continued)
For TC1 and TC2 Oil Units
For HTR1-500 / HTR2-500 Oil Units
For Air- and Water-Cooled Chillers - Series A1, 2, 3 and W1, 2, 3
Part Number Description
09003216 Kit for 400° F units Only for units mfg. before February 1996
09003215 Kit for all 500° F and 400° F units Only for units mfg. after February 1996
Note: Seal kits include shaft, nut, washer, key, flinger, case gasket, backplate gasket, washer gasket and 5/8" seal.
Note: Seal kit includes lip seal - viton, seal assembly 3/4” - Type 2, drive sleeve - stainless steel, (2) gaskets, isolator, o-ring - viton.
Note: Seal kit includes shaft seal, o-ring, flinger, D washer and hex nut.
Part Number Pump Type
09004685 231, 232 - 1/2 - 5 Hp
09004686 233 - 3 Hp, 234 - 5 Hp
09004689 233 - 5 Hp, 234 - 7.5 Hp
09004688 233 - 7.5 Hp, 10 Hp, 234 - 15 Hp
Part Number Description
09004581 Pump Seal Kit
Pump Seal Kit - TC1 and TC2 Oil Units
Pump Seal Kit - HTR1-500 / HTR2-500 Oil Units
Pump Seal Kits