Pump Documentation LEWA DOKU_532316
-
Upload
miltonmontaldo -
Category
Documents
-
view
291 -
download
17
Transcript of Pump Documentation LEWA DOKU_532316
Dokumentation
Documentation
Documentazione
Documentación
Documentação
Documentatie
Documentatointi
www.lewa.com
Protecting the environment and saving energy with LEWA pumps
LEWA pumps – especially diaphragm pumps – are characterized by the following features and often allow very environmentally friendly processes:
Hermetically tight: The technical tightness of LEWA diaphragm pumps meet the international directive IPPC 96/61/EC. The diaphragm technology makes sure that, e.g. hazardous fluids don’t leak or mix with other fluids, and vice versa: no external fluids can contaminate the fluid / liquefied gas, to be conveyed. Safety: LEWA provides the most advanced diaphragm metering pumps in the world with maximum safety for both production and environment, primarily through the unique DPS diaphragm protection system for safe control of the diaphragm movement. A crucial advance for your process reliability! Freedom from leaks and operational safety are required, particularly for hazardous, abrasive, polluting or sensitive fluids. In order to keep the load on the diaphragm at high pressures as low as possible, the LEWA diaphragm is actuated hydraulically. High pressure & high and low temperatures: The leak-free LEWA process diaphragm pumps for high flow rates are the tightness standard in high-pressure process technology. The robust one for high pressures and temperatures M 200 pump heads are specially designed for high pressures and temperatures. They have a metal diaphragm and were designed as “high pressure pump series“. Examples for high pressure: CO2 extraction at up to 700bar, methanol injection at 1200bar Examples for high temperatures and pressures: production of 2nd generation biofules (Fischer-Tropsch synthesis) at up to 200°C Examples for low temperature: metering of tetrafluoroethylene at -45°C for PTFE production High efficiency / wide control: For CO2 re-injection in fossil waste disposal sites up to 35% of the energy costs can be saved, if LEWA pumps are used instead of compressors. This saving is possible because LEWA pumps have an efficiency of > 80 %. LEWA pumps provide the best possible efficiency over the complete conveying / metering range. Safe against overload: Due to the patented diaphragm protection system (DPS) and the safe diaphragm movement control LEWA pumps offer the highest environmental safety even at extreme operating conditions such as high suction pressure or blocked suction line. The internal overpressure protection is ensured by an integrated pressure limiting valve. Life cycle costs: Investing in a LEWA diaphragm pump pays off after a short time already due to the higher energy efficiency and availability. The reasons are both the higher efficiency of LEWA pumps over the complete conveying / metering range compared to the one of rotating pumps and the much lower costs for maintenance and shutdown.
© LEWA GmbH, March 2010 – subject to changes
A 300 / en / 03.2010 / ZD-Ga
LEWA GmbH � Ulmer Straße 10, D - 71229 Leonberg � Tel. +49 (07152) 14 - 0 � Fax +49 (07152) 14 - 1303 � Internet www.lewa.de
Dokumentation Documentation
Besteller Purchaser
Bestell -Nr. Order No.
LEWA Pumpen AG for Turbomach Chile LL2-2891
Positions-Nr. TAG-No.
LPG, 2100l/h
LEWA Auftrags-Nr. Commission No.
LEWA Pos. Nr. LEWA Item No.
532316 10
Inhalt Contents Technisches Datenblatt Technical data sheet
1
Maßzeichnung Dimensional drawing
2
Prüfprotokolle Test certificates
3
Materialzeugnisse Material certificates
4
Zertifikate Certificates
5
Sonstige Dokumente Additional documents
6
Technical Data Sheet
Customer LEWA Pumpen AG Customer-Reference No. LL2-2891 Nenzlingerweg 5 LEWA-Quotation-No. LEWA-Commission-No. LEWA-Position 4153 Reinach 1 --000 P12-532316 010
issued 07.10.10 Name PC-Ron Rev.(1) Name Rev.(4) Name checked Name Rev.(2) Name Rev.(5) Name checked Name Rev.(3) Name Rev.(6) Name
LEWA GmbH � Ulmer Straße 10, D - 71229 Leonberg � Tel. +49 (07152) 14 - 0 � Fax +49 (07152) 14 - 1303 � Internet www.lewa.de V 097_ecoflow / 7.09 / OV Dokument1.doc
1 Element a,b,c M Page 1 of 1
Enquiry Data (If operating data are incomplete LEWA takes no responsibility for the pump selection!)
2 Fluid LPG / Kersosine / Diesel dangerous acc. 67/548/EEC
3 min
max min
max
4 Concentration [%] 100.00 100.00 Vapour pressure [bar abs] 3.47 13.72
5 Fluid temperature [°C] -10 30 Solidifying point [°C] -- --
6 Density [g/cm3] 0.59 0.59 Solids Concentration [%] -- --
7 Viscosity [mPa s] 2.00 12.00 Density [g/cm3] -- --
8 Required flow [l/h] 450.00 2100.00 Solids sizes [mm] -- --
9 Operating press. discharge [bar] 70.00 80.00 Hardness [Mohs] -- --
10 Operating press. suction [bar] 7.0 10.0 Settling rate [m/s] -- --
11 Area classification Ex-Zone 2 Compressibility [%] 2.37
12 Ambient conditions (temperature, climate,..) Chile, 2900 m above sea level
Design data
13 No. 6 LEWA-Serial-No. 532316-010 . 001-006
14 Type LDE3 horiz. (h) / vertical (v) h Custom.-Item-No. LPG,2100l/h
15 Crankcase Type LDE Driver Make Siemens
17 Rod thrust [N] 20000 Type 1MJ6166-4CA61
18 Stroke adjustment none (OHV) Power [kW] 15.00
19 Eccentricity [°] 0/120/240 Rpm [min-1] 1465
20 Gear reduction 6.25 Ex-protection EExdeIICT4
21 Strokes per minute [min-1] 229 Protection / Insulation IP55 / F
22 Intermed. elem.-Type/Width [mm] LDE / 0.00 Voltage [V] 400
23 Pumphead Type M911S Phases / Frequency [Hz] 3 / 50
24 Plunger-Ø [mm] 52 Size / Mounting 160 / B5
25 Flow @ max. operating press. [l/h] 2123.29 Flange-Ø [mm] A350
26 Max. perm. operating press. [bar] 80.0 Shaft-Ø [mm] x [mm] 42Dx110
27 Diaphragm condition monitor pressure contactor Thermistors 3
28 Vent screw no design (VIK,CSA,-) -
29 Type of plunger sealing piston ring Additional remarks :
30 Plunger linkage -
31 Valve Suction / DN PDF / 25 Variable frequency drive
32 Spring load [bar] 0.10 Range [Hz] 10-50
33 Valve Discharge / DN PDF / 25 Start-up against load yes
34 Spring load [bar] 0.10 Rated torque at max. press. [Nm] 44.48
35 Setting PRV pumphead int. [bar] 88 Start-up torque at max. press. [Nm] 72.33
36 Setting PRV external [bar] 88 Aditional remarks :
37 Inlet pressure loss [bar] 0.28
38 Min. required suction press.[bar abs] 1 bar above vapour press. General
39 Connection Suction DIN 25 160 Form E 2526 Paint RAL 6002 offshore
40 Discharge DIN 25 160 Form E 2526 Name plate en
41 Connection Flushing - Weight [kg] 742
42 Heating / Cooling - Sound pressure [dB[A]]
43 Materials LEWA material-Code 3 Ex-protection (pump) II2G c IIC T1-T4
44 Pumphead / Valve body 1.4571 / 1.4571 Accessories / Documentation / Remarks :
45 diaphragm PTFE to line 35: minimum design pressure discharge line: 91 bar
46 Valve Seat / Insert ring 1.4571 / - flowrate with water 2343.20 [l/h] at operating pressure
47 Guide / plate 1.4581 / 1.4571
48 Spring / Sealing ring 1.4571-FH / PTFE
49 Type of plunger sealing -
50 Hydraulic fluid (diaphragm head) M-10
51 Intermed. fluid (sandwich diaphr.) SI-FDA
1
22.1 2483,16
[upm] 154,00 371,00 1094,00 1455,00[l/h] 248,30 620,80 1862,40 2483,16
[upm] 154,00 371,00 1094,00 1455,00[l/h] 249,00 622,80 1866,50 2480,10
Datum/Date
1.5
<====
Bemerkungen /Remarks Reger,D.
1245,20
2.2
2.3
Element-Typ
max [l/h]Förderstrom / Flow rate
Förderstrom / Flow rate
Prüfergebnisse / Test results
1241,60
[°C]
Plunger diameter
Drehzahl / Speed
Temperature
Drehzahl / Speed 732,00
1.10Einstellg.Druckbegrenzung
Drehzahl / Speed====>
Drehzahl / Speed
20Temperatur
Inspector
Setting of pressure limit 88
732,00
[bar]
Prüfer /07.12.10
Saugdruck[bar]
Suction pressure
TW-ElementDrive unit a-c
Pump type
LEWA Fabrik Nr.LEWA manufacturing no.
LDE3
1.6
Prüfbedingungen / Test conditions
Prüfobjekt: Dosierpumpe TypObj. of test: Metering pump type
Customers item no. LPG,2100l/h
1.7
1.8
Pumpenkopf-TypPump head type
LEWA GmbH • Ulmer Str. 10, 71229 Leonberg, Deutschland • Tel. +49 7152 14-0 • Fax +49 7152 14-1303 • Internet www-lewa.de
min/max [min. -1] min/max
[mm]
[upm]
Q [l/h]
[mm]
1.9Prüf-FluidTest fluid
1.2 M910S
T 022.02 / 04.08 / 090100.5046 / OV
0.2
80
HublängeStroke length
1.1 LDE
Förderkennlinie / Flow characteristic
1.3 52 HubfrequenzStroke frequency
Kolbendurchmesser
Kunden Pos. Nr.
Grundlage für die Prüfung sind die für den Auftrag gültigen technischen LEWA Datenblätter.Basis for the test are the technical LEWA data sheets valid for this order.Kunde
532316
Customer LEWA Pumpen AG Kundenbestell Nr.Customers order no. LL2-2891
233
0
-
[bar]FörderdruckDischarge pressure
Prüfbericht Förderkennlinie von Pumpen / Testreport Flow characteristic of pumps
010.001-
Dieses Dokument wurde elektronisch erstellt und ist ohne Unterschrift rechtsgültigThis document was processed electronically and is valid without signature
301.4 Water
Förderstrom / Flow rate
Förderstrom / Flow rate
Drehzahl / Speed
0
500
1000
1500
2000
2500
3000
0 200 400 600 800 1000 1200 1400 1600
geprüftapproved
comprobadocontrolé
1
22.1 2484,10
[upm] 146,00 365,00 1092,00 1455,00[l/h] 248,30 620,60 1861,80 2482,40
[upm] 146,00 365,00 1092,00 1455,00[l/h] 248,80 618,90 1863,40 2484,10
Datum/Date
1.5
<====
Bemerkungen /Remarks Reger,D.
1239,10
2.2
2.3
Element-Typ
max [l/h]Förderstrom / Flow rate
Förderstrom / Flow rate
Prüfergebnisse / Test results
1241,20
[°C]
Plunger diameter
Drehzahl / Speed
Temperature
Drehzahl / Speed 728,00
1.10Einstellg.Druckbegrenzung
Drehzahl / Speed====>
Drehzahl / Speed
20Temperatur
Inspector
Setting of pressure limit 88
728,00
[bar]
Prüfer /08.12.10
Saugdruck[bar]
Suction pressure
TW-ElementDrive unit a-c
Pump type
LEWA Fabrik Nr.LEWA manufacturing no.
LDE3
1.6
Prüfbedingungen / Test conditions
Prüfobjekt: Dosierpumpe TypObj. of test: Metering pump type
Customers item no. LPG,2100l/h
1.7
1.8
Pumpenkopf-TypPump head type
LEWA GmbH • Ulmer Str. 10, 71229 Leonberg, Deutschland • Tel. +49 7152 14-0 • Fax +49 7152 14-1303 • Internet www-lewa.de
min/max [min. -1] min/max
[mm]
[upm]
Q [l/h]
[mm]
1.9Prüf-FluidTest fluid
1.2 M910S
T 022.02 / 04.08 / 090100.5046 / OV
0.2
80
HublängeStroke length
1.1 LDE
Förderkennlinie / Flow characteristic
1.3 52 HubfrequenzStroke frequency
Kolbendurchmesser
Kunden Pos. Nr.
Grundlage für die Prüfung sind die für den Auftrag gültigen technischen LEWA Datenblätter.Basis for the test are the technical LEWA data sheets valid for this order.Kunde
532316
Customer LEWA Pumpen AG Kundenbestell Nr.Customers order no. LL2-2891
233
0
-
[bar]FörderdruckDischarge pressure
Prüfbericht Förderkennlinie von Pumpen / Testreport Flow characteristic of pumps
010.002-
Dieses Dokument wurde elektronisch erstellt und ist ohne Unterschrift rechtsgültigThis document was processed electronically and is valid without signature
301.4 Water
Förderstrom / Flow rate
Förderstrom / Flow rate
Drehzahl / Speed
0
500
1000
1500
2000
2500
3000
0 200 400 600 800 1000 1200 1400 1600
geprüftapproved
comprobadocontrolé
1
22.1 2482,40
[upm] 165,00 380,00 1097,00 1455,00[l/h] 248,00 620,00 1860,10 2480,20
[upm] 165,00 380,00 1097,00 1455,00[l/h] 248,90 621,80 1863,20 2482,40
Datum/Date
1.5
<====
Bemerkungen /Remarks Reger,D.
1244,10
2.2
2.3
Element-Typ
max [l/h]Förderstrom / Flow rate
Förderstrom / Flow rate
Prüfergebnisse / Test results
1240,00
[°C]
Plunger diameter
Drehzahl / Speed
Temperature
Drehzahl / Speed 739,00
1.10Einstellg.Druckbegrenzung
Drehzahl / Speed====>
Drehzahl / Speed
20Temperatur
Inspector
Setting of pressure limit 88
739,00
[bar]
Prüfer /09.12.10
Saugdruck[bar]
Suction pressure
TW-ElementDrive unit a-c
Pump type
LEWA Fabrik Nr.LEWA manufacturing no.
LDE3
1.6
Prüfbedingungen / Test conditions
Prüfobjekt: Dosierpumpe TypObj. of test: Metering pump type
Customers item no. LPG,2100l/h
1.7
1.8
Pumpenkopf-TypPump head type
LEWA GmbH • Ulmer Str. 10, 71229 Leonberg, Deutschland • Tel. +49 7152 14-0 • Fax +49 7152 14-1303 • Internet www-lewa.de
min/max [min. -1] min/max
[mm]
[upm]
Q [l/h]
[mm]
1.9Prüf-FluidTest fluid
1.2 M910S
T 022.02 / 04.08 / 090100.5046 / OV
0.2
80
HublängeStroke length
1.1 LDE
Förderkennlinie / Flow characteristic
1.3 52 HubfrequenzStroke frequency
Kolbendurchmesser
Kunden Pos. Nr.
Grundlage für die Prüfung sind die für den Auftrag gültigen technischen LEWA Datenblätter.Basis for the test are the technical LEWA data sheets valid for this order.Kunde
532316
Customer LEWA Pumpen AG Kundenbestell Nr.Customers order no. LL2-2891
233
0
-
[bar]FörderdruckDischarge pressure
Prüfbericht Förderkennlinie von Pumpen / Testreport Flow characteristic of pumps
010.003-
Dieses Dokument wurde elektronisch erstellt und ist ohne Unterschrift rechtsgültigThis document was processed electronically and is valid without signature
301.4 Water
Förderstrom / Flow rate
Förderstrom / Flow rate
Drehzahl / Speed
0
500
1000
1500
2000
2500
3000
0 200 400 600 800 1000 1200 1400 1600
geprüftapproved
comprobadocontrolé
1
22.1 2479,80
[upm] 150,00 367,00 1093,00 1455,00[l/h] 247,90 619,70 1859,20 2478,90
[upm] 150,00 367,00 1093,00 1455,00[l/h] 247,10 618,90 1853,80 2479,80
Datum/Date
Dieses Dokument wurde elektronisch erstellt und ist ohne Unterschrift rechtsgültigThis document was processed electronically and is valid without signature
301.4 Water
Förderstrom / Flow rate
Förderstrom / Flow rate
Drehzahl / Speed
233
0
-
[bar]FörderdruckDischarge pressure
Prüfbericht Förderkennlinie von Pumpen / Testreport Flow characteristic of pumps
010.004-Kunden Pos. Nr.
Grundlage für die Prüfung sind die für den Auftrag gültigen technischen LEWA Datenblätter.Basis for the test are the technical LEWA data sheets valid for this order.Kunde
532316
Customer LEWA Pumpen AG Kundenbestell Nr.Customers order no. LL2-2891
1.3 52 HubfrequenzStroke frequency
Kolbendurchmesser
1.2 M910S
T 022.02 / 04.08 / 090100.5046 / OV
0.2
80
HublängeStroke length
1.1 LDE
Förderkennlinie / Flow characteristic
LEWA GmbH • Ulmer Str. 10, 71229 Leonberg, Deutschland • Tel. +49 7152 14-0 • Fax +49 7152 14-1303 • Internet www-lewa.de
min/max [min. -1] min/max
[mm]
[upm]
Q [l/h]
[mm]
1.9Prüf-FluidTest fluid
1.7
1.8
Pumpenkopf-TypPump head type
Pump type
LEWA Fabrik Nr.LEWA manufacturing no.
LDE3
1.6
Prüfbedingungen / Test conditions
Prüfobjekt: Dosierpumpe TypObj. of test: Metering pump type
Customers item no. LPG,2100l/h
Saugdruck[bar]
Suction pressure
TW-ElementDrive unit a-c
Inspector
Setting of pressure limit 88
730,00
[bar]
Prüfer /09.12.10
Drehzahl / Speed 730,00
1.10Einstellg.Druckbegrenzung
Drehzahl / Speed====>
Drehzahl / Speed
20Temperatur
Element-Typ
max [l/h]Förderstrom / Flow rate
Förderstrom / Flow rate
Prüfergebnisse / Test results
1239,50
[°C]
Plunger diameter
Drehzahl / Speed
Temperature 1.5
<====
Bemerkungen /Remarks Reger,D.
1237,50
2.2
2.3
0
500
1000
1500
2000
2500
3000
0 200 400 600 800 1000 1200 1400 1600
geprüftapproved
comprobadocontrolé
1
22.1 2490,10
[upm] 151,00 368,00 1094,00 1455,00[l/h] 249,00 622,50 1867,60 2490,10
[upm] 151,00 368,00 1094,00 1455,00[l/h] 249,90 624,40 1869,70 2489,20
Datum/Date
1.5
<====
Bemerkungen /Remarks Reger,D.
1247,60
2.2
2.3
Element-Typ
max [l/h]Förderstrom / Flow rate
Förderstrom / Flow rate
Prüfergebnisse / Test results
1245,10
[°C]
Plunger diameter
Drehzahl / Speed
Temperature
Drehzahl / Speed 731,00
1.10Einstellg.Druckbegrenzung
Drehzahl / Speed====>
Drehzahl / Speed
20Temperatur
Inspector
Setting of pressure limit 88
731,00
[bar]
Prüfer /10.12.10
Saugdruck[bar]
Suction pressure
TW-ElementDrive unit a-c
Pump type
LEWA Fabrik Nr.LEWA manufacturing no.
LDE3
1.6
Prüfbedingungen / Test conditions
Prüfobjekt: Dosierpumpe TypObj. of test: Metering pump type
Customers item no. LPG,2100l/h
1.7
1.8
Pumpenkopf-TypPump head type
LEWA GmbH • Ulmer Str. 10, 71229 Leonberg, Deutschland • Tel. +49 7152 14-0 • Fax +49 7152 14-1303 • Internet www-lewa.de
min/max [min. -1] min/max
[mm]
[upm]
Q [l/h]
[mm]
1.9Prüf-FluidTest fluid
1.2 M910S
T 022.02 / 04.08 / 090100.5046 / OV
0.2
80
HublängeStroke length
1.1 LDE
Förderkennlinie / Flow characteristic
1.3 52 HubfrequenzStroke frequency
Kolbendurchmesser
Kunden Pos. Nr.
Grundlage für die Prüfung sind die für den Auftrag gültigen technischen LEWA Datenblätter.Basis for the test are the technical LEWA data sheets valid for this order.Kunde
532316
Customer LEWA Pumpen AG Kundenbestell Nr.Customers order no. LL2-2891
233
0
-
[bar]FörderdruckDischarge pressure
Prüfbericht Förderkennlinie von Pumpen / Testreport Flow characteristic of pumps
010.005-
Dieses Dokument wurde elektronisch erstellt und ist ohne Unterschrift rechtsgültigThis document was processed electronically and is valid without signature
301.4 Water
Förderstrom / Flow rate
Förderstrom / Flow rate
Drehzahl / Speed
0
500
1000
1500
2000
2500
3000
0 200 400 600 800 1000 1200 1400 1600
geprüftapproved
comprobadocontrolé
1
22.1 2487,30
[upm] 150,00 367,00 1092,00 1455,00[l/h] 248,60 621,40 1864,30 2485,70
[upm] 150,00 367,00 1092,00 1455,00[l/h] 249,40 623,80 1866,70 2487,30
Datum/Date
Dieses Dokument wurde elektronisch erstellt und ist ohne Unterschrift rechtsgültigThis document was processed electronically and is valid without signature
301.4 Water
Förderstrom / Flow rate
Förderstrom / Flow rate
Drehzahl / Speed
233
0
-
[bar]FörderdruckDischarge pressure
Prüfbericht Förderkennlinie von Pumpen / Testreport Flow characteristic of pumps
010.006-Kunden Pos. Nr.
Grundlage für die Prüfung sind die für den Auftrag gültigen technischen LEWA Datenblätter.Basis for the test are the technical LEWA data sheets valid for this order.Kunde
532316
Customer LEWA Pumpen AG Kundenbestell Nr.Customers order no. LL2-2891
1.3 52 HubfrequenzStroke frequency
Kolbendurchmesser
1.2 M910S
T 022.02 / 04.08 / 090100.5046 / OV
0.2
80
HublängeStroke length
1.1 LDE
Förderkennlinie / Flow characteristic
LEWA GmbH • Ulmer Str. 10, 71229 Leonberg, Deutschland • Tel. +49 7152 14-0 • Fax +49 7152 14-1303 • Internet www-lewa.de
min/max [min. -1] min/max
[mm]
[upm]
Q [l/h]
[mm]
1.9Prüf-FluidTest fluid
1.7
1.8
Pumpenkopf-TypPump head type
Pump type
LEWA Fabrik Nr.LEWA manufacturing no.
LDE3
1.6
Prüfbedingungen / Test conditions
Prüfobjekt: Dosierpumpe TypObj. of test: Metering pump type
Customers item no. LPG,2100l/h
Saugdruck[bar]
Suction pressure
TW-ElementDrive unit a-c
Inspector
Setting of pressure limit 88
730,00
[bar]
Prüfer /13.12.10
Drehzahl / Speed 730,00
1.10Einstellg.Druckbegrenzung
Drehzahl / Speed====>
Drehzahl / Speed
20Temperatur
Element-Typ
max [l/h]Förderstrom / Flow rate
Förderstrom / Flow rate
Prüfergebnisse / Test results
1242,80
[°C]
Plunger diameter
Drehzahl / Speed
Temperature 1.5
<====
Bemerkungen /Remarks Reger,D.
1247,10
2.2
2.3
0
500
1000
1500
2000
2500
3000
0 200 400 600 800 1000 1200 1400 1600
geprüftapproved
comprobadocontrolé
LEWA GmbH � Ulmer Straße 10, D - 71229 Leonberg � Tel. +49 (07152) 14 - 0 � Fax +49 (07152) 14 - 1303 � Internet www.lewa.de A 049 / de-en / 07.10 / OV
Lackierungsvorschrift
Painting – Procedure
Zchng.-Nr. / Drwg.-no.: 1202000000/4V/00 Ident-Nr. / Ident-no.: 120200.0000
Besteller: Bestell-Nr.: Pos.-Nr.: Purchaser: Order - no.: Item - no.: Turbomach Chile LPG,2100l/h LEWA Pumpen AG LL2-2891 LEWA-Auftr.-Nr.: Erzeugnis: Typ: LEWA-Commision-no.: Product: Type: P12-532316 Metering Pump LDE3 Prüfvorschrift: Meßverfahren: Test requirement: Test method: Ausführung der Lackierung / Design of painting X Standard Lebensmittel X Seewasser Kundenspezifisch Standard Food / dairy Offshore To cust. specs.
Kundenspezifikations - Nr.: Specification of customer:
Standard - Vorbehandlung / Standard preparation Angerostete Oberflächen sind durch Sandstrahlen u./od. durch mech. Bearbeitung zu behandeln. Der Normreinheits- grad entspricht bei Sandstrahlen SA 21/2 und bei mechanischer Bearbeitung ST 2 nach ISO 8501-1 / DIN EN ISO 12944-4. Vor dem Lackieren werden die Oberflächen gereinigt. Rusted surfaces shall be cleaned by grit blasting, scraping and/or brushing. The degree of derusting by grit-blasting shall be grade SA 21/2 and by scraping or brushing shall be ST 2 acc. to ISO 8501-1 / DIN EN ISO 12944-4. Before painting surfaces must be cleaned.
Lackierung / Painting
Die Spritzlackierung erfolgt in der Regel mit Pressluft. Die Verarbeitungstemperatur und die relative Luftfeuchtigkeit sind zu beachten. Die Lackart, Schichtdicken, und Trockenzeiten sind der Tabelle zu entnehmen. Spray painting is carried out using compressed air usually. Processing temperatures and the relative humidity must be observed. The type of paint, coat thickness, drying times and recoating intervals must be taken from the table.
Zusätzliche Vorbehandlung / Additional treatment
X Sandstrahlen gemäß ISO 8501-1 / DIN EN ISO 12944-4 / SA 2 1/2 Grit blasting acc. to ISO 8501-1 / DIN EN ISO 12944-4 / SA 21/2
Art / Bezeichnung / Farbton / Hersteller Ident-Nr. Schichtdicke µm Trockenzeit Std. (Die Datenblätter der Hersteller sind zu beachten!) Ident-no. Thickness Dryingtime hours Type / Designation / Colour / Manufacturer ( The data sheet of the manufacturers must be observed ) ( 20°C ) Grundierung / Prime coat Interzinc 52 Zinc Epoxy grau / grey 103591.0528 1 x 60 4 Zwischenlackierung / Intermediate coat Interseal 670 HS Epoxy Coat weiß / white 103591.0628 1 x 200 8 Zwischenlackierung / Intermediate coat Endlackierung / Top coat Interthane 990 PU Acryl grün / green RAL 6002 103591.0596 1 x 60 8 Sollschichtdicke 320 Trockenschichtdicke gemäß DIN EN ISO 12944-5 / 5.4 Niminal thickness Dry film thickness according to DIN EN ISO 12944-5 / 5.4
Ersteller / Issuer: EPC-Ron Datum / Unterschrift / Date / Signed: 07.10.2010 EPC-Ron
Prüfprotokoll / Inspection report Wir bestätigen, daß die unter obengenannter LEWA-Auftrags-Nr. gelieferten Erzeugnisse den Vereinbarungen der Bestellung entsprechen. We confirm that the products supplied under above LEWA order numbers meet the specifications of the purchaser order.
Prüfer / Inspector: T.Häfele Datum / Unterschrift / Date / Signed: 13.12.10
Dieses Dokument wurde elektronisch erstellt und ist auch ohne Unterschrift rechtsgültig. This document was processed electronically and is valid without signature.
geprüft approved
comprobado controlé
LEWA GmbH � Ulmer Str. 10, 71229 Leonberg, Deutschland � Tel. +49 7152 14 - 0 � Fax +49 7152 14 - 1303 � Internet www.lewa.de A 132 / de,en,fr / 04.07 / OV
Herstellerprüfzertifikat M Manufacturer inspection certificate M Certificat de fabrication M DIN 55350 - 18 - 4.2.2
Dok.-Nr./Doc.-No./Doc.-No.
HT-532316-010
Über die Durchführung einer Druckprüfung. For carrying out a pressure test. Exécution d´un contrôle de pression. Besteller / Purchaser / Commettant: Bestellung-Nr. / Order-No. / No. de commande: Positions-Nr . / Item-no. / No. repère:
Lewa Pumpen AG for LL2-2891 LPG, 2100l/h
Turbomach Chile
LEWA-Auftrags-Nr ./ LEWA Commission-No./ LEWA-no. de commision: Abteilung / Départment / Dèpartement:
O12-532316-010 MP
Herstellerwerk /.Manufacturer / Fabricant: Stempel des Prüfbeauftragten / Nominated inspector`s stamp / Sceau du rèceptionnaire:
Lewa GmbH
Prüfverfahren /Test method/Méthode d’essai: Prüfvorschrift /Test requirement/Conditions d’essai: Prüfgerät / Test instrument / Instrument d’essai:
Hydrostatic test AVS 27 062 030 / API675 Presssure gauge class 1.0
Prüfmittel / Test fluid / Fluide d’essai: Prüftemperatur /Test temp./Température d’essai: Prüfdauer /Duration of test/Période d’essai:
Water 20°C 30 min
Lfd.Nr.: Anzahl Prüfobjekt Abmessung Ident-Nr.: Werkstoff Kennz. Prüfdruck
Con.no.: Quantity Object of test Dimensions Ident-No.: Material Mark Test pressure
No.: Quantité Objet d’essai Dimensions No. de identification: Matière Marquage
1 18 Diaphragm pump head
see 111490.0000 see Pump serial no.: 120 barg
Type M911S GA-drawing Parts list 532316-010.001-006
Zusammenfassende Beurteilung: Die gestellten Anforderungen sind erfüllt. Interpretation summary: Specified requirements are satisfied. Résumé: Nous avons satisfait les exigences.
Wir bestätigen, daß die unter obengenannter LEWA-Auftrags-Nr. gelieferten Erzeugnisse den Vereinbarungen der Bestellung entsprechen. We confirm that the products delivered under the above mentioned LEWA commission number are in accordance with the purchase order.
Nous confirmons que les produits livrés sous la no. de commande susmentionné sont conformes aux accords de la commande. Anlage / Enclosures / Annexe:
Prüfort und Datum : Leonberg, 13.12.10 Der Prüfbeauftragte : H.Reger Location / date of test: Nominated inspector: Lieu et date d’essai: Le réceptionnaire:
Dieses Dokument wurde elektronisch erstellt und ist auch ohne Unterschrift rechtsgültig. This document was processed electronically and is valid without signature. Ce document a été élaboré de manière électronique et est valable sans signature.
geprüft approved
comprobado controlé
LEWA GmbH � Ulmer Str. 10 � 71229 Leonberg � Deutschland DN 002 / 07.03 / OV
EC declaration of conformity as defined by EC machinery directive 2006 / 42 / EC, Annex II, A
Product: Metering pump LEWA ecoflow type LDE3 Serial no.: 532316-010.001-006
With this we declare that above stated product in the shipped version complies with the following relevant regulations:
EC machinery directive 2006 / 42 / EC
EC directive 94 / 9 / EC for equipment for the use in potentially explosive atmospheres According to article 8(1)b)ii) of guide line 94 / 9 / EC the technical documentation is deposited at the nominated location: IBExU, Institute for Safety Technology, Fuchsmuehlenweg 7, 09599 Freiberg, Germany.
Harmonized standards applied in particular
EN 809
EN 12100-1, EN 12100-2
EN 13463-1, EN 13463-5
National technical standards and specifications in particular
DIN 24289
Leonberg, 07.10.2010
Date Albrecht Hild Martin Dreher Manager Engineering Center Nominated Inspector Martin Dreher is authorized to compile
technical documents. The safety instructions of the operating manual must be followed!