bALAJI Construction equipments

Complete Solution for Construction

In major construction projects time really is money “WE CARE”. Presenting a range of world class equipment you can trust to deliver the highest performance consistently and have low operating and maintenance cost.

For the construction industry now and every time one name strands for total

trust…., TIRUPATI

Hoist Cum Mixer MachineChassis : Robustly Constructed

of Heavy steel and Mounted on 4 Pneumatic Wheel.

Lifting Bucket : Made out of Heavy gauge steel Sheet.

Tower : Made out of 100 x 50 mm Chanel up to hight of 20 mtr. With Angle tie to be supported with column at every 2 mtr.

Transmission : By steel Bushed and Roller Chain’s throughout.

Capacity : 280 / 200 litter, [ 10/7 cft. ]

Power : 10 HP Diesel Engine or 7.5 HP eletric Motor.

10/7 Cft. Concert Mixer Machine Specification:Hopper – Fed Mixer Machine.

Chassis : Robustly Constructed of Heavy steel and Mounted on 4 Pneumatic Wheel. Type: Tilting

Transmission : By steel Bushed and Roller Chain’s throughout.

Capacity: 10/7 cft. [ 280/200 liters]

Power Unit:6 HP Air cool HDS RR Engine. / 5 HP Electric Motor.

10/7 cft. Concert Mixer Machine With out Hopper.

Specification:Non Hopper Hand -Fed Mixer Machine.Chassis : Robustly Constructed of Heavy steel and Mounted on 4 Pneumatic Wheel.Type: Tilting

Transmission : By steel Bushed and Roller Chain’s throughout.Capacity: 10/7 cft. [ 280/200 liters]

Power Unit:6 HP Air cool HDS SR Engine. / 5 HP Electric Motor.

5/7 cft. Concert Mixer Machine

Specification:Hand -Fed Mixer Machine.

Chassis : Robustly Constructed of Heavy steel and Mounted on 4 Cast Iron Wheel.

Type: TiltingTransmission : By steel Bushed Chain’s or “ V “ Pully .

Capacity: 7/5 cft. [ 200/140 Liters ] Power Unit: 6 HP Air cool HDS SR Engine. / 3 HP Electric Motor.

Hand cum eletric motor drive Mixer

Specification:Hand -Fed Mixer Machine.

Chassis : Robustly Constructed of Heavy steel and Mounted on 2 nos. COT Wheel.

Type: Non TiltingTransmission : By Hand or “

V “ Pully .

Capacity: 3/5 cft. Power Unit: 2 HP Electric

Motor.

Concert Mixer with Hydraulic HopperChassis : Robustly

Constructed of Heavy steel and Mounted on 4 Pneumatic Wheel.

Type: Tilting.

Capacity: 10/7cft.[280/200 liters]

Hopper Type: HydraulicPower : 10 Hp Diesel

Engine./ 7.5 HP Motor Crompton Make with Push Bottom Starter.

Concert Vibrator

Electric Vibrator

Specification:

2 H.P. 2850 / 3000 R.P.M. 440 Volts 3 phase, 50 cycle A.C. Electric Motor with Push Button starter complete with Shaft 4 meters X 40mm Needle

 3 H.P. 440 Volts 3 phase, 50 cycle A.C. Electric Motor with Push Button Starter complete with Shaft 4mtr X 40mm Needle

Concert VibratorSpecification:

Villers /  Greaves MK-12/2, 4 stroke, 1.9 H.P. Petrol/Kerosene Engine complete with Shaft 4 meters X 40 mm Needle

Villers /  Greaves MK-25, 4 stroke, 3.4 H.P. Petrol or Petrol / Kerosene Engine complete with Shaft 4 meters X 40 mm Needle

Greaves Model 1520, 4.4 H.P. Air Cooled Diesel Oil Engine complete with Shaft 4 meters X 40 mm Needle

Needle De-watering Pump We are Trader of Needle De-watering

Pump, Our clients can avail a wide assortment of 2” De-Watering Pumps, which has a double acting piston pump that improves the De-watering ability and process. These pumps are widely preferred due to their low maintenance costs, durability, sturdy construction and reliability. We provide pumps like submersible pumps, portable De-watering pumps, hydraulic De-watering pumps and De-watering systems.

Features:

2" De-watering Pump Durability Low maintenance costs

Earth RammerSpecification:Capacity: 6 Ton.

Impact Force [Approx]: 3000Kg.

Compacting Plate size: 35” X 18”

Working Area [Approx] P.H: 5000 squre feet.

Power Unit: 5 HP Greves Diesel Engine. /

5 HP Electric Motor.

Earth RammerSpecification:Capacity: 4 Ton.

Impact Force [Approx]: 1200Kg.

Compacting Plate size: 31” X 16”

Working Area [Approx] P.H: 4000 squre feet.

Power Unit: 3.4 HP Greves Petrol-Kerocin Engine. / 3 HP Electric Motor.

Pan Vibrator Specification: Working Plate size: 24” X 14” Vibration: 3000 Per Munite. Working Area [Approx] P.H: 1200 squre feet.

Power Unit: 1.9 HP Greves Diesel Engine. / 2 HP Electric Motor.

Builder HoistCapacity : 1000 Kg Gross

Height : 16mtrs. To 33mtrs.

Speed : 25 – 30mtrs. /minite.

Power: 10 to 16 HP Air cool Single / Double Cylinder Diesel engine/Electric Motor.

Cube Testing Machine The Cube Testing Machine is used to

test the strength of concrete. It is hydraulically operated handy equipment that accurately measures the compression strength of concrete tiles, blocks and cubes. The machine is designed with engineering excellence and is acclaimed for durability, reliability and low maintenance. Tested on various parameters, the equipment is also customize as per the requirement of the client. 

Specifications:

Capacity: 100 tons Size: specimens upto 15 cms cubes and 15

x 30 cm high cylinder can be tested Measurement: Load measurement is done

by a 30 cms dial bourdon tube type hydraulic pressure gauge calibrated in 100 divisions, fitted with a maximum pointer

Cube Mold We are offering Cube

Mould. Backed by expert team members and modern infrastructure facility, we are able to manufacture and export, Tradera wide range of cube moulds. Fabricated from premium quality basic material, these are available in various sizes. Besides cube shaped moulds, we also offer these in various other shapes or types like.

Slum Cones We are Slum Cones manufacturers. It

is used for the  determination of the consistency of freshly mixed concrete, where the maximum size of the aggregate does not exceed 38mm. We are trader of Slum Cone

Specification:

The Apparatus consists of one slump cone with handles and foot pieces

The slump cone has internal dimensions 20cm diameters at base 10cm top diameters and 30cm height. Foot pieces can be fixed to the clamps on the base plate

The base plate has lifting handle for easy transportation

One graduated steel rod 16mm dia x 600mm long, rounded at one end and graduated in mms, is also supplied

Weight Batcher Description:

Lever Arms Type. WEIGH BATCHER Lever Arms

Type. 

Two buckets of 200 kg. capacity each for sand & gravel. 

Material can be unloaded directly into Mixer Hopper. 

Double - sealed bearings to prevent entry of dust particles.

Concrete Batching Plant SPECIFICATION :

Model - - RM -800Batch Capacity: 12 - 13 m³/hr.Power: 10+7.5 HP Kirloskar/Crompton Motor.Chassis: Heavy duty & robust & balanced

chassis. Wheels04 Nos. Pneumatic Wheels (6

x 16).Mixing Drum: Reversible type in M.S.sheet

with forward rotation Mixing of Concrete & reverse rotation discharge of concrete.

Hopper: Hydraulic operated with heavy-duty power pack. 17 Ipm. Gear Pump 207 Bar.

Water Tank: Adjust. 200 Liter.Concrete Discharge Height1.5 Meters. (Approx.)

Weighing System : Three Bin Weighing System .Inbuilt water systemAutomatic water control systemOverall Dimension (mm)L4200 X W2000 X H3150Weight (Kgs.)2800 kg.

Grouting Pump 40 P.S.IWe are providing our clients with a

comprehensive range of Grouting Pumps 40 P.S.I. Our range is designed using high-quality raw material, and is simple and highly durable. This type of pump is known as efficient low cast equipment that is ideally suited for grouting cable ducts in small and medium sized pre-stressed concrete members. Being hand operated, our range of stirrup pump in which grout is drawn up the suction pipe past a simple non-return ballvalve and on pressure stroke is driven forward into the feed hose through Pump can supply 130 liters of neat cement grout per hour of pumping time, which means it is a pump having a fairly large capacity. Moreover, the maximum working pressure of this pump is 3 kg/cm2 (40 psi).a similar non-return valve. 

Grouting Pump 40 P.S.I with Gauge We are providing our clients with a

comprehensive range of Grouting Pumps 40 P.S.I. Our range is designed using high-quality raw material, and is simple and highly durable. This type of pump is known as efficient low cast equipment that is ideally suited for grouting cable ducts in small and medium sized pre-stressed concrete members. Being hand operated, our range of stirrup pump in which grout is drawn up the suction pipe past a simple non-return ballvalve and on pressure stroke is driven forward into the feed hose through Pump can supply 130 liters of neat cement grout per hour of pumping time, which means it is a pump having a fairly large capacity. Moreover, the maximum working pressure of this pump is 3 kg/cm2 (40 psi).a similar non-return valve. 

Grout Pump 140 P.S.IOur range of Grouting Pumps

id especially designed for the usage in medium and large sized pre-stressed concrete works. This is a hand-operated diaphragm unit which weighs only 9 kg. The entire range is particularly suited for working on scaffolding or where operating space is restricted, and is easily handled. This type of pump produces a pressure of 10kg/cm2 (140 psi) and delivers 300 liters of neat cement grout per hour of pumping.

Concert Road Cutting Machine We offer Concrete Floor Saw Cutting

Machine to our clients. The widest selection of diesel and electric floor saw models anywhere in the world. Floor saws used for wide applications, extensions, renovation and demolition of streets, buildings runways of airport, bridges, machine foundations and walls.

Specification : Blade Adjustment : 14” to 18 “ Power : 5 HP. / 6 HP. / 7.5 HP

Concrete Floor Saw cutting Machine We offer Concrete Floor Saw

Cutting Machine to our clients. The widest selection of diesel and electric floor saw models anywhere in the world. Floor saws used for wide applications, extensions, renovation and demolition of streets, buildings runways of airport, bridges, machine foundations and walls.Specification:

Height  = 34 ½” Length = 24” Width  = 15” Weight  = 85 kg Motor  7.5 Hp/ 2800 rpm Shaft Out put 4200 rpm Cutting Blade 14” OD to 8” OD

Grove Cutting MachineWe have gained expertise in offering an impeccable range of Groove Cutting Machine. Manufactured superior quality raw material procured from the reliable vendors of the market in accordance to international quality standards, these products are extensively used in various construction industries. Owing to their excellent performance, superior quality and longer service life, these products are highly demanded by the customers.

  Technical Specifications:

Model- CTI/GCM-7: Max. depth cut: 3" Blade Size: 14" 4 MM Prime Mover: 7.5 HP 3 Phase Electric Motor ABB make

Model- CTI/GCM-10 Max. depth cut: 4" Blade Size: 16" 4MM Prime Mover: 10 HP 3 Phase Electric Motor ABB make

Model- CTI/GCM-15: Max. depth cut: 6" Blade Size: 20" 4MM Prime Mover-: 15 HP 3 Phase Electric Motor ABB make

Bitumen Boiler With Hand SprayerWe are offering Bitumen Boiler With Hand Sprayer. This is widely appreciated by our clients which are situated all round the nation and available at most affordable prices.

Scaffolding MeterialsA pressed steel Right Anglecoupler allowing 90 degree Positation.Finished in yellow passivate.Tube Diameter: 48 to 51mmMaterial: Pressed SteelWeight: 0.90 Kg

A pressed steel swivel coupler allowing 360 degree rotation.Finished in yellow passivate.Tube Diameter: 48 to 51mmMaterial: Pressed SteelWeight: 0.90 Kg 

Adjustable U Jack (Stirrup Head) fabricated out of 32, 36, & 38. mm.MS Bar with 4 TPI Acme/Square threads.U Head having requisite height fabricated out 100X6 mm MS Flat & Malleable cast iron Cup Type, Double Handle light / Heavy duty nut. Sizes available are 350, 450, 550, 600 mm bar length.

Adjustable PropWe are manufacturing for telescopic prop, size 2 to 3.75 meter high material will be strength and high quality.