PUMBA to PDF (Technical Preview)
1
Model. SF100 100A Switch Fuse TPN Grey Steel Enclosure Features & Benefits Safety Information IMPORTANT - Before undertaking any work on or maintenance of fitting:- Switch off power supply and allow sufficient time to cool before handling Do not dispose of decomissioned fitting in household waste Dispose of fitting in the appropriate section of your local civic amenity site or recycling centre only Technical Specifications General Information Product Colour/Finish Dark Metallic Grey Dimensions (mm) 400x273x245mm Ingress Protection (IP) IP41 Electrical Load (Amp) 100Amp Rated voltage/amps (vA) 440vA Terminal Capacity (mm²) 70mm² Input Voltage (V) 415v - 50Hz Output Voltage (V) 440V Knock Outs (mm) 2x25 1x32 Cable 1.6mm Poles TPN Approvals CE Construction Body Steel Enclosure Weight 1250g Warranty (Years) 1Yr Other Applications Suitable for domestic, commercial and Industrial applications Supplied with installation instructions and suitable for use with 250v Fuses fully isolated (top & bottom) for safe replacement Highest available components to current specifications and supplied with switch fuses Complies to low voltage directive 73/23/EEC and takes BS88 Part 2 - Fuses Rust protected epoxy grey powder paint finish with adequate knockouts on each side and lockable handle Ceramic Terminal Fuse Base with 415v - 50Hz Triple Pole and Neutral (4 Poles) CED ELECTRICAL GROUP 44-48 Freshwater Road, Dagenham, Essex RM8 1RX Telphone. 020 8503 8500 - Fax. 020 8503 8900 Email. [email protected] - Website. http://www.cedelectrical.co.uk
Transcript of PUMBA to PDF (Technical Preview)
Model. SF100100A Switch Fuse TPN Grey Steel Enclosure
Features & Benefits
Safety Information
IMPORTANT - Before undertaking any work on or maintenance of fitting:-
Switch off power supply and allow sufficient time to cool before handlingDo not dispose of decomissioned fitting in household wasteDispose of fitting in the appropriate section of your local civic amenity site or recycling centre only
Technical SpecificationsGeneral InformationProduct Colour/Finish Dark Metallic GreyDimensions (mm) 400x273x245mmIngress Protection (IP) IP41ElectricalLoad (Amp) 100AmpRated voltage/amps (vA) 440vATerminal Capacity (mm²) 70mm²Input Voltage (V) 415v - 50HzOutput Voltage (V) 440VKnock Outs (mm) 2x25 1x32Cable 1.6mmPoles TPNApprovals CEConstructionBody Steel EnclosureWeight 1250gWarranty (Years) 1YrOtherApplications Suitable for domestic, commercial and Industrial applications
Supplied with installation instructions and suitable for use with 250vFuses fully isolated (top & bottom) for safe replacementHighest available components to current specifications and supplied with switch fusesComplies to low voltage directive 73/23/EEC and takes BS88 Part 2 - FusesRust protected epoxy grey powder paint finish with adequate knockouts on each side and lockable handleCeramic Terminal Fuse Base with 415v - 50Hz Triple Pole and Neutral (4 Poles)
CED ELECTRICAL GROUP44-48 Freshwater Road, Dagenham, Essex RM8 1RXTelphone. 020 8503 8500 - Fax. 020 8503 8900Email. [email protected] - Website. http://www.cedelectrical.co.uk
