PULLEY LAGGING RUBBER SHEETS - mitcindia.com · Top Surface Plain / Square / Diamond / Herringbone...
Transcript of PULLEY LAGGING RUBBER SHEETS - mitcindia.com · Top Surface Plain / Square / Diamond / Herringbone...
11
PULLEY LAGGING RUBBER SHEETS
MANDELIA TRANSMISsIONS www.mitcindia.com
u Provide superior grip around the pulley and reduced material build -up
u Better gripping allows belt to be run at lower tensions, with an improved service life
u Low material build up and pulley wear gives improved belt tracking
WHY RUBBER LAGGING?
Our Pulley Lagging Rubber Sheet exhibits some of the best elasticity, and are also resistant to any kind of wear and tear. They have a unique blend of natural and synthetic rubber, and it prevents conveyor belt slippage.
It also gives excellent resistance to corrosion while reducing any kind of material build-up at the same time. All of these properties has helped us to become the countries' leading Pulley Lagging Rubber Sheet manufacturer in the market. We produce these sheets in black color which also influence belt tracking positively.
They are available in various profiles like diamond, square and plain profiles, irrespective of the presence of special bonding layer. They are also highly resistant to abrasion, ozone, and to adverse weather conditions, temperatures, UV rays and radiation. Depending on its hardness, specific gravity, bonding layer, mechanical properties, surface finish they are made available in a variety of choices.
S.N Descrption UOMGen Purpose
GradeSAR Grade
(Super Abrasion)HR Grade
0 0(120 C - 150 C)
1 Width mm Max 2400mm Max 2400mm Max 2400mm
2 Thickness mm 8-20 mm 8-20 mm 8-20 mm
3 Tensile Strength(Mpa) (kN/M) 10.0 Min 15.0 Min 12.0 Min
4 Elongation at Break % 350 Min. 450 Min. 450 Min.
5 Hardness Shore A 60+/- 5 60+/- 5 60+/- 5
6 Abrasion (as per DIN 53516) mm3 200 Max 120 Max 200 Max
7 Sp. Gr. g/cc 1.15 +/- 0.05 1.15 +/- 0.02 1.15 +/- 0.02
OTHER DETAILS
Top Surface Plain / Square / Diamond / Herringbone / Ceramic
Bottom Surface Available with CN Bonding layer (1-1.5mm thick) and can be delivered in Buffed/Ground condition
Sides Clear rubber can be provided near the pulley edges (in case of ceramic Lagging)
Plain
Pul
ley
Squar
e Pul
ley
Diam
ond
Pulley Her
ringb
one Pul
ley
Ceram
ic P
ulley