Publications 2014

AMABILI, M.

Journal Publications

1. Breslavsky, I.D., Amabili, M., Legrand, M., 2014, “Physically and geometrically non-linear vibrations of thin rectangular plates,” International Journal of Non-linear Mechanics, vol. 58, pp. 30-40.

2. Amabili, M., 2014, “A non-linear higher-order thickness stretching and shear deformation theory for large-amplitude vibrations of laminated doubly curved shells,” International Journal of Non-linear Mechanics, vol. 58, pp. 57-75.

3. Gayesh, M.H. Amabili, M., 2014, “Coupled longitudinal-transverse behaviour of a geometrically imperfect microbeam,” Compo sites Part B: Engineering, vol. 60, pp. 371-377.

4. Gayesh, M.H., Farokhi, H., Amabili, M., 2014, “In-plane and out-of-plane motion characteristics of microbeams with modal interactions,” Composites Part B: Engineering, vol. 60, pp. 423-439.

5. Alijani, F., Amabili, M., 2014, “Non-linear vibrations of shells: A literature review from 2003 to 2013,”International Journal of Non-linear Mechanics, vol. 58, pp. 233-257.

6. Alijani, F., Amabili, M., 2014, “Nonlinear vibrations and multiple resonances of fluid filled arbitrary laminated circular cylindrical shells,” Composite Structures, vol. 108, pp. 951-962.

7. Alijani, F., Amabili, M., 2014, “Effect of thickness deformation on large-amplitude vibrations of functionally graded rectangular plates,” Composite Structures, vol. 113, pp. 89-107.

8. Amabili, M., 2014, “Discussion on ‘Nonlinear vibration of functionally graded circular cylindrical shells based on improved Donnell equations’ by D.H. Bich and N. Xuan Nguyen, Journal of Sound and Vibration 331 (25) (2012) 5488-5501.”Journal of Sound and Vibration, vol. 333, pp. 1851-1852.

9. Daneshmand, F., Farokhi, H., Amabili, M., 2014, “A higher-order mathematical modeling for dynamic behavior of protein microtubule shell structures including shear deformation and small-scale effects,” Mathematical Biosciences, vol. 252, pp. 67-82.

10. Breslavsky, I.D., Amabili, M., Legrand, M., 2014, “Nonlinear vibrations of thin hyperelastic plates,” Journal of Sound and Vibration, vol. 333, pp. 4668-4681.

11. Tubaldi, E., Alijani, F., Amabili, M., 2014, “Nonlinear vibrations and stability of a periodically supported rectangular plate in axial flow,” International Journal of Non-linear Mechanics, vol. 66, pp. 54-65.

12. Firouz-Abadi, R.D., Rahmanian, M., Amabili, M., 2014, “Free vibration of moderately thick conical shells using a higher order shear deformable theory,” Journal of Vibration and Acoustics, vol. 136, No. 5, art. 051001 (8 pages).

13. Alijani, F., and Amabili, M, 2014, “Non-linear static bending and forced vibrations of rectangular plates retaining non-linearities in rotations and thickness deformation,” International Journal of Non-linear Mechanics, vol. 67, pp. 394-404.

14. Kheiri, M., Païdoussis, M.P., Del Pozo, G.C., Amabili, M., 2014, “Dynamics of a pipe conveying fluid flexibly restrained at the ends,” Journal of Fluids and Structures, vol. 49, pp. 360-385.

15. Amabili, M., and Alijani, F., 2014, “Preface of the special issue: 4th Canadian Conference on Non-linear Solid Mechanics (4th CCNLSM),”International Journal of Non-linear Mechanics, vol. 66, pp. 1-2.

Conference Proceedings

1. Alijani, F., and Amabili, M., 2014, Proceedings of the 8th European Nonlinear Dynamics Conference (ENOC 2014), “Large amplitude vibrations of fluid filled angle-ply laminated circular cylindrical shells,” Wien, Austria, July 6-11, paper ID 451.

2. Amabili, M., and Alijani, F. 2014, Proceedings of the 8th European Nonlinear Dynamics Conference (ENOC 2014), “Nonlinear vibrations of shell type structures: theory & experiments (keynote lecture),” Wien, Austria, July 6-11, paper ID 455.

3. Zippo, A., Amabili, M., Pellicano, F., Barbieri, M., 2014, Proceedings of the 8th European Nonlinear Dynamics Conference (ENOC 2014), “Linear and nonlinear active vibration control of a sandwich carbon fiber plate,” Wien, Austria, July 6-11, paper ID 538.

4. Breslavsky, I., Amabili, M., Legrand, M., 2014 11th World Congress on Computational Mechanics, “Static and dynamic bending of rectangular sheet of biomaterial,” Barcelona, Spain, 20-25 July.

5. Kheiri, M., Paidoussis, M.P., Amabili, M., 2014, Proceedings of the ASME 2014 Pressure Vessels & Piping Conference (PVP2014-28337), “An experimental study of dynamics of towed flexible cylinders,” Anaheim, CA, USA, July 20-24.

6. Breslavsky, I., Legrand, M., Amabili, M., 2014, Proceedings of the ASME 2014 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, “Vibration of a square hyperelastic plate around statically pre-loaded state,” Buffalo, New York, USA, August 17-20.

7. Lacaze, S., Missoum, S., Alijani, F., Amabili, M., 2014, Proceedings of the American Society for Composites 29th Technical Conference, 16th US-Japan Conference on Composite

Materials, ASTM-D30 Meeting (paper 435), “Identification under uncertainty of material properties of composite sandwich panels,” La Jolla, CA, USA, September 8-10.

8. Kheiri, M., Paidoussis, M.P., Amabili, M., 2014, Proceedings of the ASME International Mechanical Engineering Congress and Exposition, (IMECE2014-36691), “Dynamics and Stability of Towed Flexible Cylinders: Theory and Experiments,” Montreal, Canada, November 14-20.

9. Alijani, F., Amabili, M., 2014, Proceedings of the ASME International Mechanical Engineering Congress and Exposition, (IMECE2014-37131), “Nonlinear vibrations of pressurized functionally graded plates using higher-order thickness stretching theory,” Montreal, Canada, November 14-20.

10. Tubaldi, E., Amabili, M., Alijani, F., 2014, Proceedings of the ASME International Mechanical Engineering Congress and Exposition, (IMECE2014-37283), “Nonlinear vibrations of plates in axial pulsating flow,” Montreal, Canada, November 14-20.

11. Ferrari, G., Capriotti, M., Amabili, M., Garziera, R., 2014, Proceedings of the ASME International Mechanical Engineering Congress and Exposition, (IMECE2014-37611), “Active vibration control of a composite sandwich plate,” Montreal, Canada, November 14-20.

12. Amabili, M., Karazis, K., Gottuso, D., Hartman, J., Matthews, B., Hatman, V., 2014, Proceedings of the ASME International Mechanical Engineering Congress and Exposition, (IMECE2014-38573), “Fluid-structure interaction of slender structures with applications in nuclear engineering,” Montreal, Canada, November 14-20.

______________________________________________________________________________

ANGELES, J.

Journal Publications

1. Bai, S. and Angeles, J., 2014, “Synthesis of RCCC linkages to visit four given poses,” ASME Journal of Mechanisms and Robotics, DOI: 10.1115/1.4028637.

2. Ghotbi, B., González, F., Kövecses, J. and Angeles, J., 2015, “A novel concept for analysis and performance evaluation of wheeled rover,” Mechanism and Machine Theory, Vol. 83, pp. 137-151.

3. Zargarbashi, S.H.H. and Angeles, J., 2014, “Identification of error sources in a five-axis machine tool using FFT analysis,” The International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-014-6323-4.

4. Zou, T. and Angeles, J., 2014, “Isotropic accelerometer strapdowns and related algorithms for rigid-body pose and twist estimation,” ASME J. Applied Mechanics, Vol. 81, pp. 111001-1--111001-13, DOI: 10.1115/1.4028405.

5. Javid, F., Pasini, D. and Angeles, J., 2014, “A new surgical barbed staple for minimally invasive surgery,” ASME J. Medical Devices, Vol. 8, No. 3, pp. 030951-1{030951-2.

6. Harada, T. and Angeles, J., 2014, “Kinematics and singularity analysis of a CRRHHRRC parallel Schönflies motion generator,” CSME Transactions, Vol. 38, No. 2, pp. 173-183.

7. Taghvaeipour, A., Angeles, J. and Lessard, L., 2014, “Optimum structural design of a two-limb Schönflies motion generator,” Mechanism and Machine Theory, Vol. 80, pp. 125-141.

8. Taghvaeipour, A., Angeles, J. and Lessard, L., 2014, “Elastodynamics of a two-limb Schönflies motion generator,” Proc. IMechE Part C, J. Mechanical Engineering Science, DOI: 10.1177/0954406214538781.

9. Al-Widyan, K. and Angeles, J., 2014, “The synthesis of spherical motion generators in the presence of an incomplete set of attitudes,” ASME J. Mechanisms and Robotics, Vol. 6, pp. 031008-1--031008-8.

10. Zou, T. and Angeles, J., 2014, “Structural and instrumentation design of a microelectromechanical systems biaxial accelerometer,” Proc. IMechE Part C, J. Mechanical Engineering Science, DOI: 10.1177/0954406213518745.

11. Zou, T. and Angeles, J., 2014, “The decoupling of the Cartesian stiffness matrix in the design of microaccelerometers,” Multibody System Dynamics, pp. 1-21, DOI: 10.1007/s11044-014-9408-9.

Conference Proceedings

1. Ghotbi, B., González, F., Kövecses, J. and Angeles, J., 2014, Proc. 2014 IEEE Int. Conf. Robotics & Automation, “Effect of normal force dispersion on the mobility of wheeled robots operating on soft soil,” Hong Kong, China, May 31-June 5, pp. 6338-6344.

2. Harada, T., Friedlaender, T. and Angeles, J., 2014, Proc. 2014 IEEE Int. Conf. Robotics & Automation, “The development of an innovative two-dof cylindrical drive: design, analysis and preliminary tests,” Hong Kong, China, May 31-June 5, pp. 6612-6617.

3. Figliolini, G., Stachel, H. and Angeles, J., 2014, Proc. 16th International Conference on Geometry and Graphics, “A study on spatial cycloid gears,” in Schröcker, H.-P. and Husty, M. (eds.), Innsbruck, Austria, Aug. 4-8, pp. 1192-1205.

4. Azimi, A., Holz, D., Kövecses, J., Angeles, J. and Teichmann, M., 2014, Proc. ASME 2014 Int. Design Engineering Technical Conferences & Computers and Information in Engineering

Conference IDETC/CIE 2014, “Paper DETC2014-35548, Dynamics simulation of rovers on soft terrain: theory, algorithms, and experimental validation,” Buffalo, NY, August 17-20, 10 pp.

5. Figliolini, G., Stachel, H. and Angeles, J., 2014, Paper DETC2014-34932, Proc. ASME 2014 Int. Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2014, “The role of the orthogonal helicoid in the generation of the tooth flanks of involute-gear pairs with skew axes,” Buffalo, NY, August 17-20, 10 pp.

6. Zou, T., Shaker, M., Angeles, J. and Morozov, A., 2014, Paper DETC2014-34568, Proc. ASME 2014 Int. Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2014, “Optimization of tooth root profile of spur gears for maximum load-carrying capacity,” Buffalo, NY, August 17-20, 8 pp.

7. Figliolini, G., Stachel, H. and Angeles, J., 2014, Proc. International Gear Conference, “Synthesis of the base curves of non-circular gears via the return circle,” Lyon Villeurbanne, France, August 26-28, pp. 540-550.

8. Leger, J. and Angeles, J., 2014, Fifth IFToMM-FeIbIM International Symposium on Multibody Systems and Mechatronics-MUSME 2014, “A solution to the approximate spherical Burmester problem,” Huatulco, Oaxaca, Mexico, October 21-24, DOI: 10.1007/978-3-319-09858-6, pp. 521-529.

9. Shan, X., Zou, T., Forbes, J.R. and Angeles, J., 2014, Paper IMECE2014-37280, ASME 2014 International Mechanical Engineering Congress & Exposition IMECE2014, “Design of biaxial navigation-grade MEMS accelerometers,” Montreal, November 14-20.

10. Morozov, A., Humphries, K., Zou, T., Martins, S. and Angeles, J, 2014, 2014 IEEE International Electric Vehicle Conference, “Design and optimization of a drivetrain with two-speed transmission for electric delivery step van,” Florence, Italy, December 17-19, Paper TS.6-6.

BALIGA, B.R.

Journal Publications

1. Oliveira, L.A., Lopes, A.G., Baliga, B.R., Almeida, M., and Viegas, D.X., 2014, “Numerical prediction of size, mass, temperature and trajectory of cylindrical wind-driven firebrands,” International Journal of Wildland Fire, Vol. 23, pp. 698-708.

2. Afara, S., Medvescek, J., Mydlarski, L., Baliga, B.R., MacDonald, M., 2014, “Development of a wall-shear-stress sensor and measurements in mini-channels with partial blockages,” Experiments in Fluids, Vol. 55, pp. 1734-1-10.

Conference Proceedings

1. Medvescek, J.I., Mydlarski, L., and Baliga, B.R., 2014, Proceedings ASME International Mechanical Engineering Congress and Exposition, “Observations on the experimental determination of permeability and Forchheimer coefficient for fluid flows in porous metal foams,” Paper # IMECE2014-38835, Session 10-11-2, Fundamentals of Single Phase Convection - 2, Montréal, Québec, Nov. 14-20, pp. 1-11.

2. Medvescek, J.I., Afara, S., Mydlarski, L., and Baliga, B.R., 2014, Proceedings ASME International Mechanical Engineering Congress and Exposition, “Calibration of a wall-shear-stress sensor made of a flush-mounted hot-wire over a shallow rectangular slot,” Paper # IMECE2014-39127, Session 9-10-1, Symposium on Fluid Measurements and Instrumentation, Montréal, Québec, Nov. 14-20, pp.1-8.

3. Lamoureux, A. and Baliga, B.R., 2014, Proceedings ASME International Mechanical Engineering Congress and Exposition, “Experimental validation of numerical simulations of a closed-loop thermosyphon operating with slurries of a microencapsulated phase-change material,” Paper # IMECE2014-38812, Session 9-13-1, Forum of Experimental Validation of CFD Modeling in Heat Exchangers – A, Montréal, Québec, Nov. 14-20, pp. 1-11.

4. Lamoureux, A. and Baliga, B.R., 2014, Proceedings Third International Conference on Computational Methods for Thermal Problems (ThermaComp2014), “Hybrid numerical methods combining segmented network and multidimensional models for simulating thermofluid systems,” Lake Bled, Slovenia, June 2-4,pp. 61-70.

BARTHELAT, F.

Journal Publications

1. Chintapalli, R.K., Breton, S., Dastjerdi, A.K., Barthelat, F., 2014, “Strain rate hardening: a hidden but critical mechanism for biological composites?” Acta Biomaterialia 10(12) p 5064-73.

2. Barthelat, F., 2014, “Designing nacre-like materials for simultaneous stiffness, strength and toughness: optimum materials, composition, microstructure and size,” Journal of the Mechanics and Physics of Solids 73, p 22-37.

3. Nabavi, A., Capozzi, A., Goroshin, S., Frost, D.L., Barthelat, F., 2014, “A novel method for net-shape manufacturing of metal–metal sulfide cermets,” Journal of Materials Research 49, p 8095-8106.

4. Vernerey, F.J. and Barthelat, F., 2014, “Skin and scales of teleost fish: Simple structure but high performance and multiple functions,” Journal of the Mechanics and Physics of Solids 68, p 66-76.

5. Chintapalli, R., Mirkhalaf, M., Dastjerdi, A. K., Barthelat, F., 2014, “Fabrication, testing and modeling of a new flexible armor inspired from natural fish scales and osteoderms,” Bioinspiration & Biomimetics 9, 036005.

6. M. Mirkhalaf, A. K. Dastjerdi and F. Barthelat, 2014, “Overcoming the brittleness of glass through bio-inspiration and micro-architecture,” Nature Communications 5:3166

7. Vernerey, F., Musiket, K., Barthelat, F., 2014, “Mechanics of Fish skin: A computational approach for bio-inspired flexible composites,” International Journal of Solids and Structures 51 (1), pp. 274-283.

BERGTHORSON, J

Journal Publications

1. Evans, M.D.G., Versailles, P., Bergthorson, J.M., Coulombe, S., 2014, “Increased flame reactivity of a lean premixed flame through the use of a custom-built high-voltage pulsed plasma source,” IEEE Transactions on Plasma Science 42, 2844-2845.

2. Peters, N.D., Akih-Kumgeh, B., Bergthorson, J.M., 2014, “Comparative analysis of chemical kinetic models using the Alternate Species Elimination approach,” Journal of Engineering for Gas Turbines & Power 137, Paper No: GTP-14-1332, 021505.

3. Gauthier, G.P., Watson, G.M.G., Bergthorson, J.M., 2014, “Burning rates and temperatures of flames in excess-enthalpy burners: A numerical study of flame propagation in small heat-recirculating tubes,” Combustion & Flame 161, 2348-2360.

4. Julien, P., Soo, M., Goroshin, S., Frost, D., Bergthorson, J.M., Glumac, N. and Zhang, F., 2014, “Combustion of aluminum suspensions in hydrocarbon ame products,” Journal of Propulsion & Power 30, 1047-1054.

5. Watson, G.M.G., Munzar, J.D., Bergthorson, J.M., 2014, “NO formation in model syngas and biogas blends,” Fuel 124, 113-124.

6. Fotovat, F., Chaouki, J., Bergthorson, J.M., 2014, “Distribution of large biomass particles in a sand-biomass fluidized bed: experiments and modeling,” AIChE Journal 60, 869-880.

Conference Proceedings

1. Julien, P., Whiteley, S., Wright, A., Goroshin, S., Bergthorson, J.M. and Frost, D.L., 2014, 10th International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions. “Effect of scale on freely-propagating flames in aluminum dust clouds,” Bergen, Norway.

2. Peters, N.D., Akih-Kumgeh, B., Bergthorson, J.M., 2014, Proceedings of the ASME Turbo Expo 2014. “Comparative analysis of chemical kinetic models using the alternate species elimination (ASE) approach,” ASME paper GT2014-25805. Dusseldorf, Germany.

3. Lee, H.C., Mohamad, A.A., Jiang, L.Y., Bergthorson, J.M., and Salusbury, S.D., 2014, Proceedings of the ASME Turbo Expo 2014, “Numerical simulation of lean premixed stagnation ames,” ASME paper GT2014-25556. Dusseldorf, Germany.

4. Fossi, A., deChamplain, A., Ghazlani, M.A., Paquet, B., Kalla, S., Bergthorson, J.M., 2014, Proceedings of the ASME Turbo Expo 2014, “Large eddy simulation of turbulent swirling Jet-A1 spray flames with inclusion of chemical non-equilibrium effects: flamelet model,” ASME paper GT2014-27225. Dusseldorf, Germany, 2014.

5. Munzar, J.D, Zia, A., Versailles, P., Jimenez, R., Akih-Kumgeh, B., Bergthorson, J.M., 2014, Proceedings of the ASME Turbo Expo 2014, “Comparison of laminar flame speeds, extinction strain rates and vapour pressures of Jet A-1/HRJ biojet fuel blends,” ASME paper GT2014-25951. Dusseldorf, Germany.

CORTELEZZI, L.

Journal Publications

1. Germaine, E., Mydlarski, L. and Cortelezzi, L., 2014, “Evolution of the scalar dissipation rate downstream of a concentrated line source in turbulent channel flow”, Journal of Fluid Mechanics, Vol. 749, pp. 227-274. 2. Carminati, M., Pedalà, L., Bianchi, E., Nason, F., Dubini, G., Cortelezzi, L., Ferrari G., Sampietro M., 2014, “Capacitive detection of micrometric airborne particulate matter for solid-state personal air quality monitors,” Sensors and Actuators A: Physical, Vol. 219, pp. 80-87. Conference Proceedings 1. Dubini G., Carminati M., Pedalà L., Nason F., Bianchi E., Cortelezzi L., Ferrari G., Sampietro M., 2014, 4th Micro and Nano Flows Conference: MNF2014"Design of an air-flow microchamber for microparticles detection,” London, United Kingdom. 2. Carminati M., Pedalà L., Nason F., Bianchi E., Dubini G., Cortelezzi L., Ferrari G., Sampietro M., 2014, DUST 2014 International Conference on Atmospheric Dust, “Capacitive single-particle microdetector for real-time pervasive PM10 monitoring,” Castellaneta Marina (Taranto), Italy. FROST, D. Journal Publications 1. Nabavi, A., Capozzi, A., Goroshin, S., Frost, D.L. and Barthelat, F., 2014, “A novel method for net-shape manufacturing of metal–metal sulfide cermets,” J. Materials Science, Vol. 49, 8095-810.

2. Barua, R., Aydin, H., Rajagopalan, S.K., Yue, S., Frost, D.L., Bertrand, O.F., and Mongrain, R., 2014, “Development of a metallic biodegradable stent based on microgalvanic corrosion,” J. Medical Devices, Vol. 8, 020913-1. 3. Julien, P., Soo, M., Goroshin, S., Frost, D.L., Bergthorson, J., Glumac, N., and Zhang, F., 2014, “Combustion of aluminum suspensions in hydrocarbon flame products,” J. of Propulsion and Power, Vol. 30, No. 4, pp. 1047-1054. 4. Loiseau, J., Petel, O.E., Huneault, J., Serge, M., Frost, D.L., and Higgins, A.J., 2014, “Explosive acceleration of plates using nonconventional explosives heavily loaded with inert and reactive materials,” Journal of Physics: Conference Series 500, 182027. 5. Frost, D.L., Ruel, J.-F., Zarei, Z., Goroshin, S., Gregoire, Y., Zhang, F., Milne, A., and Longbottom, A., 2014, “Explosive formation of coherent particle jets,” Journal of Physics: conference series 500, 112026. 6. Petel, O.E., Appleby-Thomas, G., Hameed, A., Capozzi, A., Goroshin, S., Frost, D.L., and Hazell, P., 2014, “Lateral stress evolution in chromium sulfide,” Journal of Physics: Conference Series 500, 182031. 7. Petel, O.E., Ouellet, S., Higgins, A.J., and Frost, D.L., 2014, “Shock Hugoniot measurements in foam,” Journal of Physics: Conference Series 500, 112050. 8. Loiseau, J., Huneault, J., Petel, O., Goroshin, S., Frost, D.L., Higgins, A.J., and Zhang, F., 2014, “Development of multi-component explosive lenses for arbitrary phase velocity generation,” Journal of Physics: Conference Series 500, 192010. 9. Marr, B., Petel, O., Frost, D.L., Higgins, A., and Ringuette, S., 2014, “Shock-induced deformation in dry and wetted particle beds,” Journal of Physics: Conference Series 500, 112044. Conference Proceedings 1. Loiseau, J., Georges, W., Frost, D.L., and Higgins, A.J., 2014, Proc. 15th International Detonation Symposium, “Acceleration of planar flyers by explosives heavily loaded with inert materials,” San Francisco, CA, July 13-18. 2. Milne, A.M., Longbottom, A.W., Frost, D.L., Loiseau, J., Goroshin, S., and Petel, O., 2014, Proc. 15th International Detonation Symposium, “Explosive fragmentation of liquids in spherical geometry,” San Francisco, CA, July 13-18. 3. Julien, P., Whiteley, S., Wright, A., Vickery, J., Goroshin, S., Bergthorson, J.M., and Frost, D.L., 2014, Proc. 10th International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions, “Effect of scale on freely propagating flames in aluminum dust clouds,” Bergen, Norway, June 10-14.

HABASHI, W.

Journal Publications

1. Zhan, Z., Habashi, W.G., Fossati, M., 2014, “Local Reduced Order Modeling and Iterative Sampling for Extensive Parametric Analyses of Aero-Icing Problems,” DOI: 10.2514/1.J053654, AIAA Journal, November.

Conference Proceedings

1. Kelly, D., Fouladi, H., Fossati, M., Habashi, W.G., Alicino, R., Quaranta G., Masarati, P., 2014, American Helicopter Society 70th Annual Forum, “Assessment of Ice Accretion Effects on Rotor Dynamics via Multi-Body and CFD Approaches,” Montreal, Canada.

2. Pendenza, A., Habashi W.G., Fossati, M., 2014, AIAA Paper 2014-3072, 44th AIAA Fluid Dynamics Conference, “A 3D Mesh Deformation Technique for Irregular In-flight Ice Accretion Shapes", Atlanta.

3. Bilodeau, D., Habashi, W.G., Baruzzi, G.S., Fossati, M., 2014, 22nd Annual Conference of the CFD Society of Canada, “An Eulerian Detachment Model for Water Droplets in Proximity of Sharp Corner,” Toronto, Ontario, Canada.

4. Zhan, Z., Habashi, W.G., Fossati, M., 2014, 22nd Annual Conference of the CFD Society of Canada, “Exploration of the Aero-icing Envelopes via Reduced Order Modeling and Iterative Sampling,” Toronto, Canada.

5. Zhan, Y., Habashi, W.G., Khurram, R.A., 2014, 22nd Annual Conference of the CFD Society of Canada, “Predicting Wind-induced Vibrations of High-rise Buildings using Unsteady CFD and Modal Analysis,” Toronto, Canada.

6. Keyhan, H., McClure G., Habashi, W.G., 2014, EURODYN 2014, “A Simplified Procedure for Modeling Gusty Wind Effects on Overhead Transmission Lines Using CFD,” Porto.

7. Switchenko, D., Habashi,W.G., Baruzzi, G.S., Ozcer, I., 2014, AIAA SCITECH 2014, AIAA 2014-1399, “FENSAP-ICE Simulation of Complex Wind Turbine Icing Events, and Comparison to Observed Performance Data”, National Harbour, USA.

HIGGINS, A.

Journal Publications

1. Olney, K.L., Chiu, P.H., Higgins, A., Serge, M., Weihs, T.P., Fritz, G.M., Stover, A.K., Benson, D.J., Nesterenko, V.F., 2014, “The mechanisms of plastic strain accommodation during the high strain rate collapse of corrugated Ni–Al laminate cylinders,” Philosophical Magazine, Vol. 94, Iss. 26, pp. 3017-3035.

2. Higgins, A.J., 2014, “Discrete effects in energetic materials,” (Topical Review), Journal of Physics: Conference Series, Vol. 500, 052016.

3. Serge, M., Petel, O., Loiseau, J., Higgins, A.J., 2014, “Strength effects in an imploding cylinder with constant mass-to-explosive loading,” Journal of Physics: Conference Series, Vol. 500, 112058.

4. Olney, K., Chiu, P.H., Higgins, A., Serge, M., Fritz, G., Stover, A., Benson, D., Nesterenko, V., 2014, “Mechanisms of high strain, high strain rate plastic flow in the explosively driven collapse of Ni-Al laminate cylinders,” Journal of Physics: Conference Series, Vol. 500, 2914, 132002.

5. Loiseau, J., Huneault, J., Petel, O., Goroshin, S., Frost, D., Higgins, A., and Zhang, F., 2014, “Development of multi-component explosive lenses for arbitrary phase velocity generation,” Journal of Physics: Conference Series, Vol. 500, 2014, 192010.

6. Loiseau, J., Petel, O., Huneault, J., Serge, M., Frost, D., Higgins, A.J., 2014, “Explosive acceleration of plates using nonconventional explosives heavily loaded with inert and reactive materials,” Journal of Physics: Conference Series, Vol. 500, 182027.

7. Petel, O., Ouellet, S., Frost, D., Higgins, A., 2014, “Shock Hugoniot Measurements in Foam,” Journal of Physics: Conference Series, Vol. 500, 112050.

8. Serge, M., Chiu, P.H., Higgins, A., and Nesterenko V., 2014,“Reactivity of Ti-B, Cr-S, and Mn-S powder systems during explosively-driven collapse,” Journal of Physics: Conference Series, Vol. 500, 182039.

9. Huneault, J., Loiseau, J., Higgins, A.J., 2014, “Development of an accelerating-piston implosion-driven launcher,” Journal of Physics: Conference Series, Vol. 500, 142019.

10. Marr, B., Petel, O., Frost, D., Higgins, A.J., and Ringuette, S., 2014, “Shock-Induced Deformation in Dry and Wetted Particle Beds,” Journal of Physics: Conference Series, Vol. 500, 112044.

Conference Proceedings

1. Li, J., Mi, X.C., Higgins, A.J., 2014, 15th International Detonation Symposium, “Propagation Distance Required to Reach Steady-State Detonation Velocity in Finite-Sized Charges,” San Francisco, CA, July 13-18.

2. Loiseau, J., Georges, W., Frost, D.L., Higgins, A.J., 2014, “Acceleration of Planar Flyers by Explosives Heavily Loaded with Inert Materials,” 15th International Detonation Symposium, San Francisco, CA, July 13-18.

HUBERT, P.

Journal Publications

1. Kratz, J., Preau, M., Hubert, P., Genest, M., 2014, “Vacuum-Bag Manufacturing of Honeycomb Structures: Opportunity for In-Situ Process Monitoring and Non-Destructive Voidage Estimates,” SAMPE Journal, 50, 7-16.

2. Mirjalili, V., Ramachandramoorthy, R., Hubert, P., 2014, “Enhancement of Fracture Toughness of Carbon Fibre Laminated Composites using Multi Wall Carbon Nanotubes”, Carbon, 79, 413-423.

3. Demaria, C., Paźsdzior, P., Johnston, A., Djokic, D., Hubert, P., 2014, “Development of Residual Stresses during Electron Beam Processing”, Journal of Strain Analysis for Engineering Design, 2014, 49 (3), 179-189.

4. Centea, T., and Hubert, P., 2014, “Out-of-autoclave Prepreg Consolidation under Deficient Pressure Conditions”, Journal of Composite Materials, 48 (16), 2033-2045.

5. Cattin, C., and Hubert, P., 2014, “Piezoresistance in Polymer Nanocomposites with High Aspect Ratio Particles”, ACS Applied Materials and Interfaces, 2014, 6 (3), 1804-1811.

Conference Proceedings

1. Payette, S., Smith, A. W., Goyette, K. Kazanas, C., Hubert, P., 2014, CAMX 2014,”Out-of-Autoclave manufacturing: Benchmarking of an integrally heated tool-plate”, Orlando, FL, October 13-16.

2. LeBlanc, D., Levy, A., Hubert, P., Roy, S., Yousefpour, A., 2014, CAMX 2014, “Compression Moulding of Stiffened Brackets using Randomly-oriented Strands Theroplastic Composites”, Orlando, FL, October 13-16.

3. Hubert, P., Demaria, C., Keulen, C., Mobuchon, C., Poursartip, A., 2014, 29th ASC Annual Technical Conference, “Development of a Workflow for the Design of Liquid Composite Molding Processes”, San Diego, CA, September 8-10.

4. Helmus, R., Hubert, P., Hinterhölzl, R., 2014, 12th International Conference on Flow Processing in Composite Materials (FPCM 12), “A Stochastic Approach to Modeling the Effect of Material Variation in Out-of-autoclave Prepreg Consolidation”, Enschede, the Netherlands, July 14-16.

5. Landry, B. and Hubert, P., 2014, 12th International Conference on Flow Processing in Composite Materials (FPCM 12), “Moulding Defects in Continuous Fibre and Randomly-oriented Strands Carbon/PEEK Composites”, Enschede, the Netherlands, July 14-16.

6. Hubert, P. Schlager, B. Yourdkhani, M. Liu, W., 2014, 12th International Conference on Flow Processing in Composite Materials (FPCM 12), “Processing and Characterization of Multi-scale Composites Manufactured by Out-of-autoclave Resin Film Infusion,” Enschede, the Netherlands, July 14-16.

7. Sherafat, M. H., Quaegebeur, N., Lessard, L., Hubert, P., Masson, P., 2014, 7th European Workshop on Structural Health Monitoring (EWSHM 2014), “Guided Wave Propagation through Composite Bonded Joints,” Nantes, France, July 8-11.

8. Levy, A., Stadlin, J., Hubert, P., 2014, SAMPE Technical Conference 2014, “Corner Consolidation in Vacuum Bag Only Processing of Out-of-Autoclave Composite Prepregs Laminates,” Seattle, WA, June 2-5.

9. Kratz, J., Préau, M., Genet, M. Hubert, P., 2014, SAMPE Technical Conference 2014, “Vacuum-Bag-Only Prepreg Processing of Honeycomb Structures: From Lab-Scale Experiments to an Aircraft Demonstrator,” Seattle, WA, June 2-5.

10. LeBlanc, D., Levy, A., Hubert, P., Roy, S., Yousefpour, A., 2014, SAMPE Technical Conference 2014, “Compression Moulding of Complex Parts with Rib Features using Randomly-oriented Strands Thermoplastoc Composites,” Seattle, WA, June 2-5.

11. Bujun, K., and Hubert, P., 2014, SAMPE Technical Conference 2014, “Analytical Heat Transfer Modelling for In-situ Bonded Scarf Repairs of Monolothic Composite Panels”, Seattle, WA, June 2-5.

12. Helmus, R., Hubert, P., Hinterhölzl, R., 2014, SAMPE Technical Conference 2014, “Sensitivity Analysis of a Process Model for Out-of-autoclave Prepreg Consolidation,” Seattle, WA, June 2-5.

13. Liu, W., and Hubert, P., 2014, AIAA Science and Technology Forum and Exposition 2014: 55th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Materials Conference, “Self-sensing of Strain in Carbon Nanotube Modified Carbon Fibre Reinforced Composites,” National Harbor, MD, January 13-17.

KOKKOLARAS, M.

Journal Publications

1. Marwaha, G., and Kokkolaras, M., 2014, “System of Systems Approach to Air Transportation Design Using Nested Optimization and Direct Search,” Structural and Multidisciplinary Optimization, online-first DOI 10.1007/s00158-014-1180-1.

2. Talgorn, B., Le Digabel, S., Kokkolaras, M., 2014, “Problem Formulations for Simulation-based Design Optimization Using Statistical Surrogates and Direct Search,” ASME Journal of Mechanical Design, online-first DOI: 10.1115/1.4028756.

3. Kang, N., Kokkolaras, M., Papalambros, P., Yoo, S., Na, W., Park , J., Featherman, D., 2014, “Optimal Design of Commercial Vehicle Systems Using Analytical Target Cascading,” Structural and Multidisciplinary Optimization, online-first DOI 10.1007/s00158-014-1097-8.

4. Kang, N., Kokkolaras, M., Papalambros, P., 2014, “Solving Multiobjective Optimization Problems Using Quasi-separable MDO Formulations and Analytical Target Cascading,” Structural and Multidisciplinary Optimization, 50:849-859.

5. Drignei, D., Mourelatos, Z., Kokkolaras, M., Pandey,V., 2014, “Reallocation of Testing Resources in Validating Optimal Designs Using Local Domains,” Structural and Multidisciplinary Optimization, 50:825-838.

Conference Proceedings

1. Marwaha, G. and Kokkolaras. M., 2014, Proceedings of the 40th ASME Design Automation Conference, “System of Systems Approach to Air Transportation Design Using Nested Problem Formulation and Direct Search Optimization,” Buffalo, New York, August 17-20, paper no. DETC-2014-34772.

2. Talgorn, B., Le Digabel, S., Kokkolaras, M., 2014, Proceedings of the 40th ASME Design Automation Conference, “Problem Formulations for Simulation-based Design Optimization Using Statistical Surrogates and Direct Search,” Buffalo, New York, August 17-20, paper no. DETC-2014-34778.

3. Fortin, C., Yue, S., Packwood, K., Lemarquis, J.-P., Zhao, Y.F., Kokkolaras, M., 2014, Proceedings of the 10th International CDIO Conference, “A New CDIO-based Training Program For Advanced Degrees in Aerospace Engineering,” Barcelona, Spain, June 15-19.

KÖVECSES, J.

Journal Publications

1. Hirschkorn, M. and Kövecses, J., 2014, “Operational Space Formulation and Analysis for Rovers,” ASME Journal of Computational and Nonlinear Dynamics, Vol. 9, No. 4, pp. 041005_1-12 .

2. Dopico, D., González, F., Cuadrado, J., Kövecses, J., 2014, “Determination of Holonomic and Nonholonomic Constraint Reactions in an Index-3 Augmented Lagrangian Formulation with Velocity and Acceleration Projections,” ASME Journal of Computational and Nonlinear Dynamics, Vol. 9, No. 4, pp. 041006_1-9.

Conference Proceedings

1. Ghotbi, B., Gonzalez, F., Kövecses, J., Angeles, J., 2014, 2014 IEEE International Conference Robotics and Automation, “Effect of Normal Force Dispersion on the Mobility of Wheeled Robots Operating on Soft Soil,” Hong Kong, China, May 31-June 5.

2. Azimi, A., Holz, D., Kövecses, J., Angeles, J., Teichmann, M., 2014, ASME 2014 International Design Engineering Technical Conferences (IDETC 2014), “Dynamics Simulation of Rovers on Soft Terrain: Theory, Algorithms, and Experimental Validation,” Buffalo, New York, August 17-20.

3. Ghotbi, B., Gonzalez, F., Kövecses, J., Angeles, J., 2014, ASME 2014 International Design Engineering Technical Conferences (IDETC 2014), “Observative Models for Design and Operation of Wheeled Robots,” Buffalo, NY, August 17-20.

4. Ghotbi, B., Gonzalez, F., Kövecses, J., Angeles, J., 2014, ASME 2014 International Design Engineering Technical Conferences (IDETC 2014), “The Role of Normal Force Distribution in Rover Performance,” Buffalo, NY, August 17-20.

5. Gonzalez, F., MacMahon, S., Ghotbi, B., Kövecses, J., Angeles, J., 2014, ASME 2014 International Design Engineering Technical Conferences (IDETC 2014), “Impact Analysis of Exploration Rovers,” Buffalo, NY, August 17-20.

6. Mashayekhi, M. J., and Kövecses, J., 2014, ASME 2014 International Design Engineering Technical Conferences, “Comparative Study of Formulations and Algorithms for Rigid-Body Contact in Multibody Systems,” Buffalo, New York, August 17-20.

7. Kovacs, L.L., Shayan Amin, S., Kövecses, J., 2014, ASME 2014 International Design Engineering Technical Conferences (IDETC 2014), “Human Operator Effects in the Stabilization of Haptic Interactions,” Buffalo, New York, August 17-20.

8. Mashayekhi, M. J. Kövecses, J., 2014, 11th World Congress on Computational Mechanics, “A Comparison Between Different Approaches to Model Multibody Systems with Contact,” Barcelona, Spain, 20-25 July 2014.

9. Ghotbi, B., Karpman, E., Gonzalez, F., Kövecses, J. Angeles, J., 2014, The 3rd Joint International Conference on Multibody System Dynamics, “Analysis of Obstacle Climbing Manoeuvres for Planetary Exploration Rovers,” Busan, South Korea, June 30-July 3.

10. Gonzalez, F., Ghotbi, B., Kövecses, J., Angeles, J., 2014, The 3rd Joint International Conference on Multibody System Dynamics, “A Method for Modelling Normal Reaction Forces between Wheel and Soft Terrain for Planetary Exploration Rovers,” Busan, South Korea, June 30-July 3.

LEE, J.

Journal Publications

1. Gao, Y., Ng, H.D., Lee, J.H.S., 2014, “Minimum tube diameters for steady propagation of gaseous detonations,” Shock Waves Journal, Vol. 24(4), pp. 447-454.

2. Qian, DW, Lee, J.H.S., Ng, H.D., 2014, “Formation and evolution of cylindrically diverging detonation waves in gases,” Physics of Fluids (Gallery of Fluid Motion), Vol. 26, 091103.

3. Gao, Y., Lee, J.H.S., Ng, H.D., 2014, “Velocity fluctuations near the detonation limits,” Combustion and Flame, Vol. 161 (11), pp. 2982-2990.

LEE, T.

Journal Publications

1. Lee, T. and Su, Y.Y., 2014, “Surface pressures developed on an airfoil undergoing heaving and pitching motion,” ASME Journal of Fluids Engineering; doi:10.1115/1.4029443; 10 pages.

LEGRAND, M.

Journal Publications

1. Jones, S., and Legrand, M., 2014, “Forced vibrations of a turbine blade undergoing regularized unilateral contact conditions through the wavelet balance method,” International Journal for Numerical Methods in Engineering, 101(5):351-374.

2. Batailly, A., Meingast, M., Legrand, M., 2014, “Unilateral contact induced blade/casing vibratory interactions in industrial impellers: analysis for rigid casings,” Journal of Sound and Vibration, 337:244-262.

3. Batailly, A., Legrand, M., Millecamps, A., Cochon S., Garcin, F., 2014, “Redesign of a high-pressure compressor blade accounting for nonlinear structural interactions,” Journal of Engineering for Gas Turbines and Power, 137(2).

4. Breslavsky, I., Amabili, M., Legrand, M., 2014, “ Nonlinear vibrations of thin hyperelastic plates, Journal of Sound and Vibration,” 333(19):4668-4681.

5. Meingast, M., and Legrand, M., 2014, “A linear complementarity problem formulation for periodic solutions to unilateral contact problems,” International Journal of Non-Linear Mechanics, 66:18-27.

6. Breslavsky, I., Amabili, M., Legrand, M., 2014, “Physically and geometrically non-linear vibrations of thin rectangular plates,” International Journal of Non-Linear Mechanics, 58.

Conference Proceedings

1. Legrand, M., and Junca, S., 2014, Proceedings of the 11th World Congress on Computational Mechanics, “Nonlinear modes of a discrete mechanical system with rigid contact,” Barcelona, Spain, July 20–25.

2. Jones, S., and Legrand, M., 2014, Proceedings of the ASME IDETC/CIE Conference, “Vibration of an axial bar experiencing periodic unilateral contact using the wavelet balance method,” Buffalo, New York, August 17–20.

3. Salvat, N., Batailly, A., Legrand, M., 2014, Proceedings of ASME/IGTI Turbo Expo 2014, “Two-dimensional modeling of shaft precessional motions induced by blade/casing unilateral contact in aircraft engines,” GT2014-25688, Düsseldorf, Germany, June 16–20.

4. Batailly, A., Legrand, M., Millecamps, A., Garcin, F., 2014, Proceedings of ASME/IGTI Turbo Expo 2014, “High-pressure compressor blade dynamics under aerodynamic and unilateral contact forcings,” GT2014-25675, Düsseldorf, Germany, June 16–20.

5. Batailly, A., Legrand, M., 2014, Proceedings of ASME/IGTI Turbo Expo 2014, “Conjectural bifurcation analysis of an aircraft engine blade undergoing three-dimensional unilateral contact constraints,” GT2014-25674, Düsseldorf, Germany, June 16–20.

6. Batailly, A., Legrand, M., Millecamps, A., Cochon, S., Garcin, F., 2014, Proceedings ofASME/IGTI Turbo Expo 2014, “Redesign of a high-pressure compressor blade accounting for nonlinear structural interactions,” GT2014-25673, Düsseldorf, Germany, June 16–20.

LESSARD, L.

Journal Publications

1. Taghvaeipour, A., Angeles, J., Lessard, L., 2014, “Optimum Structural Design of a Two-limb Schönflies Motion Generator,” Mechanism and Machine Theory, Vol. 80, pp. 125-141.

2. Arian Nik, M., Fayazbakhsh, K., Pasini, D., Lessard, L., 2014, “Optimization of variable stiffness composites with embedded defects induced by Automated Fiber Placement,” Composite Structures 2014, Vol. 107, pp. 160-166.

3. Arian Nik, M., Fayazbakhsh, K., Pasini, D., Lessard, L., 2014, “A Comparative Study of Metamodeling Methods for the Design Optimization of Variable Stiffness Composites,” Composite Structures 2014, Vol. 107, pp. 494-501.

Conference Proceedings

1. Hay, K., and Lessard, L., 10th Canada-Japan Workship on Composite Materials, “Dynamic Properties of Hybrid Composite Hollow Cylinders: Application for Mountain Bicycle Handlebars,” Vancouver, Canada, August 19-21.

2. Damodaran, A., Lessard, L., Annamalai, S. B., 2014, ICMMM International Conference on Materials Manufacturing and Metrology, “Application of Composite Materials to Indian Musical Instruments,” Chennai, India, August 8-9.

3. Selezneva, M., Meldrum, S., Roy, S., Lessard, L., Yousefpour, A., 2014, 16th European Colloquium on Composite Materials, “Modelling of Mechanical Properties of Randomly Oriented Strands Thermoplastic Composites,” Seville, Spain, June 22-26.

4. Shafqat, A., Mirza, S., Lessard, L., 2014, SMSB-IX International Conference on Short and Medium Span Bridges, “Flexural Characteristics of Reinforced Concrete Beams with Fiber-Reinforced Polymer Composite Shell,” Calgary, Alberta, July 15-18.

5. Shafqat, A., Mirza, S., Lessard, L., 2014, SMSB-IX International Conference on Short and Medium Span Bridges, “Chloride Ingress through Concrete Externally Reinforced with FRP Composite Shell,” Calgary, Alberta, July 15-18.

6. Shafqat, A., Mirza, S., Lessard, L., 2014, Proceedings of Structural Faults and Repair – 2014 conference, “Long-term Durability of Prestressed Concrete Bridge Girders with FRP Shell,” Imperial College, London, England, July 8-10.

7. Arian Nik, M., Fayazbakhsh, K., Lessard, L., Pasini, D., 2014, First International Conference on Mechanics of Composites, “Manufacturing Aspects of Laminates with Curvilinear Fibers made by Automated Fiber Placement,” Stonybrook, NY, June 9-12.

8. Sherafat, M., Quaegebeur, N., Lessard, L., Hubert, P., Masson, P., 2014, 7th European Workshop on Structural Health Monitoring, “Guided Wave Propagation Through Composite Bonded Joints,” Nantes, France, July 8-11.

LIU, X.

Journal Publications

1. Li, X., Wang, Y.H., Zhao, C., Liu X.Y., 2014, “Paper-based piezoelectric touch pads with hydrothermally grown zinc oxide nanowires,” ACS Applied Materials and Interfaces, Vol. 6, No. 24, pp. 22004–22012.

2. Zhao, C., Zhong, G.W., Kim, D.E., Liu J.X, Liu, X.Y., 2014,“A portable lab-on-a-chip system for gold-nanoparticle-based colorimetric detection of metal ions in water,” Biomicrofluidics, Vol. 8, No. 5, 052107 (9pp).

3. Thuo, M.M., Martinez, R.V., Lan, W.J., Liu, X.Y., Barber, J.R., Atkinson, M., Bandarage, D., Bloch, J.F., Whitesides, G.M., 2014, “Fabrication of low-cost paper-based microfluidic devices

by embossing or cut-and-stack methods,” Chemistry of Materials, Vol. 26, No. 14, pp. 4230–4237.

4. Xu, X.G., Wang, S.L., Liu, J.L., Liu, X.Y., 2014, “Intelligent prediction of fan rotation stall in power plants based on pressure sensor data measured in-situ,” Sensors, Vol. 14, No. 5, pp. 8794–8809.

5. Li, X. and Liu, X.Y., 2014 “Fabrication of three-dimensional microfluidic channels in a single layer of cellulose paper,” Microfluidics and Nanofluidics, Vol. 16, No. 5, pp. 819–827.

Conference Proceedings

1. Li, X. and Liu, X.Y., 2014, IEEE International Conference on Nanotechnology, “Hydrothermal growth of ZnO nanowires on paper for flexible electronics,” Toronto, August 18–21.

2. Zhang, W.Z., Sobolevski, A., Li, B., Rao, Y., Liu, X.Y., 2014, The 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC’14), “A robotic micromanipulation system for force-controlled stimulation and fluorescent calcium imaging of Drosophila larvae,” Chicago, IL, August 26–31.

3. Song, P.F., Zhang, W.Z., Sobolevski, A., Bernard, K., Hekimi, S., Liu, X.Y., 2014, ASME 2014 International Mechanical Engineering Congress & Exposition, “A microfluidic device for Caenorhabditis elegans based chemical testing,” Montreal, Canada, November 14-20.

4. Zhao, C., Zhong, G.W., Kim, D.E., Liu, J.X., Liu, X.Y., 2014, ASME 2014 International Mechanical Engineering Congress & Exposition, “A portable sensing system for gold-nanoparticle-based colorimetric detection of metal ions in water,” Montreal, Canada, November 14-20.

5. Wang, Y.H., Li, X., Liu, X.Y., 2014, IEEE International Conference on Micro Electro Mechanical Systems (MEMS’14), “Paper-based piezoelectric touch pads integrating zinc oxide nanowires,” San Francisco, CA, January 26–30, 2014.

MISRA, A.K.

Journal Publications

1. Paak, M, Paidoussis, M.P., Misra, A.K., 2014, “Influence of steady viscous forces on the non-linear behaviour of cantilevered circular cylindrical shells conveying fluid,” International Journal of Non-linear Mechanics, Vol. 58, pp. 167-183.

2. Nobari, N.A. and Misra, A.K., 2014, “A hybrid attitude controller consisting of electromagnetic torque rods and an active fluid ring,” Acta Astronautica, Vol. 94, pp. 470 - 479.

3. Cao, L., Chen, X., Misra, A.K., 2014, “Minimum sliding mode error feedback control for fault tolerant reconfigurable satellite formations with J2 perturbations,” Acta Astronautica, Vol. 96, pp. 201 - 216.

4. Woo, P. and Misra, A.K., 2014, “Energy considerations in the partial space elevator,” Acta Astronautica, Vol. 99, pp. 77 - 84.

5. Masayekhi, M.J. and Misra, A.K., 2014, “Optimization of the tether cut point in asteroid diversion using tethers,” Journal of Guidance, Control, and Dynamics, Vol. 37, pp. 898 - 906.

6.Woo, P. and Misra, A.K., 2014, “Equilibrium points in the full three-body problem,” Acta Astronautica, Vol. 99, pp. 158 - 165.

7. Cao, L., Chen, X. and Misra, A.K., 2014, “Central difference predictive filter for attitude determination with low precision sensors and model errors,” Advances in Space Research, Vol. 54, pp. 2336 - 2348.

8. Kumar, K.D., Misra, A.K., Varma, S., Reid, T., Bellefeuille, F., 2014, “Maintenance of satellite formations using environmental forces,” Acta Astronautica, Vol. 102, pp. 341 - 354.

Conference Proceedings

1. Oliveira, T.C., Prado, A.F.B.A., Misra, A.K., 2014, 24th AAS/AIAA Space Flight Mechanics Meeting, “Determining orbits that can be controlled by natural forces,” Santa Fe, New Mexico, January 26-30, Paper No. AAS-14-426.

2. Fan, Z., Sharf, I., Misra, A.K., 2014, 24th AAS/AIAA Space Flight Mechanics Meeting, “On-line mass estimation for a tethered space debris during post-capture and retrieval,” Santa Fe, New Mexico, January 26-30, Paper No. AAS-14-451.

3. Woo, P. and Misra, A.K., 2014, 2nd IAA Conference on Dynamics and Control of Space Systems (DyCOSS2), “Bounded trajectories of a spacecraft near an equilibrium point of a binary asteroid system,” Rome, Italy, March 24-26, Paper No. IAA-AAS-DyCOSS2-14-11-06.

4. Fan, Z., Sharf, I., Misra, A.K., 2014, 14th International Space Conference of Pacific-basin Societies (ISCOPS), “Estimation of inertia parameters of a space debris for its tether-assisted removal,” Xia'n, China, May 27-30, Paper No. ISCOPS-2014-D3.

5. Cohen, S. and Misra, A.K. Static deformation of the space elevator tether due to a climber. 65th International Astronautical Congress, Toronto, Canada, September 29 - October 3, 2014, Paper No. IAC-14-D4.3.6.

6. Misra, A.K., 2014, 4th Paolo Santini Memorial Lecture, 65th International Astronautical Congress, “Dynamics modeling and control of flexible space manipulators,” Toronto, Canada, September 30, 2014.

7. Woo, P. and Misra, A.K., 2014, ICTACEM 2014, “Dynamics of a spacecraft in the vicinity of binary asteroids,” IIT, Kharagpur, India, December 29-31, Keynote Lecture.

MONGEAU, L.

Journal Publications

1. Coppoolse, J.M.S., Van Kooten, T.G., Li, N.Y.K., Thibeault, S.L., Heris, H.K., Mongeau, L., Pitaro, J., Daniel, S.J., 2014, “In vivo study in a rat animal model of composite microgels based on hyaluronic acid and gelatin for the reconstruction of the vocal fold lamina propria following injury,” J. Speech Hearing Research, Vol. 57, S658-S673, 2014. doi:10.1044/2014_JSLHR-S-12-0292.

2. Amiri, S., Taher, R., Mongeau, L., 2014, “Experimental study of the oscillatory velocity and temperature near a heated circular cylinder in an acoustic standing wave,” Int. J. Heat Transfer, Vol. 69, pp. 464-472.

3. Miri, A.K., Heris, H.K., Mongeau, L., Javid, F., 2014, “Nanoscale Viscoelasticity of Extracellular Matrix Proteins in Soft Tissues: a Multiscale Approach,” J. Mech. Behavior of Biomedical Materials, Vol. 30, pp. 196-204, PMID: 24317493. doi: 10.1016/j.jmbbm.2013.10.022.

4. Kazemirad, S., Bakhshaei, H., Mongeau, L., Kost, K., 2014, “Non-invasive In vivo measurement of the shear modulus of human vocal fold tissue,” J. Biomechanics, Vol. 47, No. 5, pp. 1173-1179, PMID: 24433668. Doi: 10.1016/j.jbiomech.2013.11.034.

5. Latifi, N., Miri, A.K., Mongeau, L., 2014, “Determination of the elastic properties of rabbit vocal fold tissue using uniaxial tensile testing and a tailored finite element model,” Journal of Mechanical Behavior of Biological Materials, Vol. 39, pp. 366-374, PMID: 25173237. doi: 10.1016/j.jmbbm.2014.07.031.

Conference Proceedings

1. Najafiyazdi, A., Najafiyazdi, M., Mongeau, L.G., 2014, 7th AIAA Theoretical Fluid Mechanics Conference, “A High Resolution Low-pass Differential Filter for Large Eddy Simulations on Unstructured Grids,” Paper AIAA 2014-3213, Atlanta, Georgia, June 16-20, Doi: 10.2514/6.2014-3213.

2. Lew, P.T., Gopalakrishnan, P., Casalino, D., Shock, R., Li, Y, Zhang, R., Chen, H., Habibi, K., Mongeau, L.G., 2014, 20th AIAA/CEAS Aeroacoustics Conference, “An Extended Lattice Boltzmann Methodology for High Subsonic Jet Noise Prediction,” Paper AIAA 2014-2755, Atlanta, Georgia, June 16-20, Doi: 10.2514/6.2014-2755.

3. Habibi, K., Mongeau, L.G., Casalino, D., Lew, P.T., 2014, 20th AIAA/CEAS Aeroacoustics Conference, “Aeroacoustic study of Internal Mixing Nozzles with Forced Lobed Mixers using a

High-Mach Subsonic Lattice Boltzmann Scheme,” Paper AIAA 2014-3313, Atlanta, Georgia, June 16-20, Doi: 10.2514/6.2014-3313.

4. Jamal, A., Paidoussis, M., Mongeau, L.G., 2014, ASME Pressure Vessels & Piping Conference, “Linear and Nonlinear Dynamics of Cantilevered Cylinders in Axial Flow,” Paper PVP2014-28282, 2014, Anaheim, California, July 20-24.

5. Latifi, N. Khadivi Heris, H., Kazemirad, S., Mongeau, L., 2014, Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition IMECE2014, “Development of a Self-Oscillating Mechanical Model to Investigate the Biological Response of Human Vocal Fold Fibroblasts to Phono-Mimetic Stimulation,” Montreal, Quebec, Canada, November 14-20.

6. Najafiyazdi, M., Mongeau, L., Nadarajah,S., 2014, IUTAM Symposium on Advances in Computation, Modeling and Control of Transitional and Turbulent Flows, “A high resolution differential filter for large eddy simulation on unstructured grids for high-order methods,” Goa, India, December 15-18.

MONGRAIN, R.

Journal Publications

1. Mohammadi, H., Cartier, R., Mongrain, R., 2014, “Derivation of a simplified relation for assessing aortic root pressure drop incorporating wall compliance,” Med Biol Eng Comput, doi: 10.1007/s11517-014-1228-9.

2. Al-Mangour, B., Vo, P., Mongrain, R., Irissou, E., Yue, S., 2014, “Effect of Heat Treatment on the Microstructure and Mechanical Properties of Stainless Steel 316L Coatings Produced by Cold Spray for Biomedical Applications,” Journal of Thermal Spray Technology, 23(4): 641-652.

3. Barua, R., Aydin, H., Rajagopalan, S., Yue, S., Frost, D., Bertrand, O., Mongrain, R., 2014, “Development of a Metallic Biodegradable Stent Based on Micro-Galvanic Corrosion,” J. Med. Devices, doi: 10.1115/1.4027012.

4. Abdelaal, E., Plourde, G., MacHaalany, J., Arsenaul, J., Rimac, G., Déry, J.P., Barbeau, G., Larose, E., De Larochellière, R., Nguyen, C.M., Allende, R., Ribeiro, H., Costerousse, O., Mongrain, R., Bertrand, O.F., 2014, “Effectiveness of Low Rate Fluoroscopy at Reducing Operator and Patient Radiation Dose During Transradial Coronary Diagnostic Angiography and Interventions,” JACC Cardiovasc Interv, May;7(5):567-74.

5. Adelali, M., Reiter, S., Mongrain, R., Bertrand, M., L’Allier, P.L., Kiritkou, E.A., Tardif, J-C., 2014, “Cap buckling as a potential mechanism of atherosclerotic plaque vulnerability: a numerical, experimental and analytical study with clinical preliminary insights,” J Mech Behav Biomed Mater, 32:210-24.

6. Vo, P., Al-Mangour, B., Erissou, E, Mongrain, R., Yue, S., 2014, “Effect of heat treatment on the microstructure and mechanical properties of stainless steel 316L coatings produced by cold spray for biomedical applications,” Journal of Thermal Spray Technology, 23(4): 641-652.

Conference Proceedings

1. Dionne, P.O., Wener, E., Mongrain, R., Leask, R., Poirier, N., Cartier, R., El-Hammamsy, 2014, AHA Congress, Core 6 Catheter based and surgical interventions, “Session: Surgical Therapy for Valvular Heart Diseases, Abstract 19528 Biomechanical properties of patient specific aortias and pulmonary arteries according to aortic valve phenotype: relevance to the Ross procedure,” Circulation 130:A19528.

2. Mongrain, R., Frattolin, J., Barua, R., Frost, D., Yue, S., Bertrand, O.F., 2014, XVIè Congrès Francophone de Cardiologie Interventionnelle, “Les stents biodégradables métalliques peuvent-ils constituer une alternative aux polymères?,” Paris, France, October 8-10.

3. Mohammadi, H., Cartier, R., Mongrain, R., 2014, Vascular Biology and Cardiovascular Disease, “The effect of aortic valve stenosis on wall shear stress pattern in coronary arteries, 9th International Symposium on Biomechanics,” Montreal, April.

4. Roy, D., Kauffmann, C., Lerouge, S., Mongrain, R., Soulez, G., 2014, 7th World Congress of Biomechanics (WCB 2014), “Simulation of a complete stent-graft deployment in a patient specific abdominal aortic aneurysm,” Boston, USA, July.

5. Mongrain, R., Shahmansouri, N., Tardif, J.C., Cartier, R., 2014, 11th World Congress on Computational Mechanics, 5th European Conference on Computational Mechanic and 6th European Conference on Computational Fluid Mechanics “Development of toughness exhaustion models for vascular tissue rupture,” Barcelona, Spain, July.

6. Pagiatakis, C., and Mongrain, R., 2014, 11th World Congress on Computational Mechanics, 5th European Conference on Computational Mechanic and 6th European Conference on Computational Fluid Mechanics, “Geometric multiscale modeling for the functional characterization of coronary bifurcation lesions,” Barcelona, Spain, July.

7. Pagiatakis, C., and Mongrain, R., 2014, 7th World Congress of Biomechanics (WCB 2014), “Effect of bifurcation angle on the functional impact of coronary bifurcation lesions,” Boston, USA, July.

8. Barua, R., Aydin, H., Yue, S., Frost, D., Bertrand, O.F., Mongrain, R., 2014, Design of Medical Devices Conference, “Development of metallic biodegradable stent based on galvanic corrosion,” Minneapolis, MN, USA, April.

9. Roy, D., Lerouge, S., Kauffman, C.D., Mongrain, R., Soulez, G., 2014, Society of Interventional Radiology, 39th annual Meeting, “Simulation of stent-graft crimping: a part of the EVAR virtual planning for abdominal aortic aneurysms,” San Diego, March.

MYDLARSKI, L.

Journal Publications

1. Germaine, E., Mydlarski, L. Cortelezzi, L., 2014, “Evolution of the scalar dissipation rate downstream of a concentrated line source in turbulent channel flow. Journal of Fluid Mechanics,” 749, pp. 227-274.

2. Afara, S., Medvescek, J., Mydlarski, L., Baliga, B.R., MacDonald, M., 2014, “Development of a wall-shear-stress sensor and measurements in mini-channels with partial blockages,” Experiments in Fluids, 55:1734, pp. 1-10.

Conference Proceedings

1. Medvescek, J.I., Mydlarski, L., Baliga, B.R., 2014, Proceedings ASME International Mechanical Engineering Congress and Exposition, Paper # IMECE2014-38835, Session 10-11-2, Fundamentals of Single Phase Convection - 2, “Observations on the experimental determination of permeability and Forchheimer coefficient for fluid flows in porous metal foams,” Montréal, Canada, November 14-20, pp. 1-11. 2) Medvescek, J.I., Afara, S., Mydlarski, L., Baliga, B.R., 2014, Proceedings ASME International Mechanical Engineering Congress and Exposition, Paper # IMECE2014-39127, Session 9-10-1, Symposium on Fluid Measurements and Instrumentation, “Calibration of a wall-shear-stress sensor made of a flush-mounted hot-wire over a shallow rectangular slot,” Montréal, Canada, November 14-20, pp.1-8. 3) Akutina, Y., Gaskin, S.J., Mydlarski, L., 2014, Proceedings of the International Conference on Fluvial Hydraulics (River Flow 2014), “Entrainment mechanisms in river embayments,” Lausanne, Switzerland, September 3-5, 2014, pp.31-37. 4) Akutina, Y., Gaskin, S.J. and Mydlarski, L., 2014, Seventh International Symposium on Environmental Hydraulics (ISEH VII), Singapore, “Three-dimensional structure of the flow in a shallow embayment,” Singapore, January 7-9 2014, pp. 204-207.

NADARAJAH, S.

Journal Publications

1. Walther, B., and Nadarajah, S., 2014, “Three-Dimensional Viscous Adjoint-Based Constrained Aerodynamic Shape Optimization for Multistage Turbomachines”, ASME Journal of Turbomachinery (TURBO-14-1314, Document ID: 1000717815).

2. Vermier, B., and Nadarajah, S., 2014, “Adaptive IMEX schemes for high-order unstructured methods”, Journal of Computational Physics (doi:10.1016/j.jcp.2014.09.016).

3. Mosahebi, A., and Nadarajah, S., 2014, “An Implicit and Adaptive Nonlinear Frequency Domain Approach for Periodic Viscous Flows”, Journal of Computational Physics, Elsevier, 10.1016/j.jcp.2014.08.022.

Conference Proceedings

1. Najafiyazdi, M., Nadarajah, S., Mongeau, L.,2014, IUTAM, “A High Resolution Differential Filter for Large Eddy Simulation on Unstructured Grids for High-Order Methods,” December.

2. Vermier, B., and Nadarajah, S., 2014, AIAA Science and Technology Conference, “Canonical Test Cases and High-Order Unstructured Implicit Large Eddy Simulation,” National Harbour, MD, January.

3. Bisson, F., and Nadarajah, S., 2014, AIAA Science and Technology Conference, “Adjoint-Based Aerodynamic Optimization of Benchmark Problems”, National Harbour, MD, January.

4. Bisson, F., and Nadarajah, S., 2014, AIAA Applied Aerodynamics Conference, “djoint-Based Aerodynamic Design Optimization Using the Drag Decomposition Method,” San Diego, June.

NAHON, M.

Journal Publications

1. Liu, X., Chen, X., Nahon, M., 2014, “Motion/force Constrainability Analysis of Lower-Mobility Parallel Manipulators,” ASME Journal of Mechanisms and Robotics, Vol. 6, No. 3, pp. 031006-1-9.

2. Plamondon, N., and Nahon, M., 2014, “Control of an Underwater Biomimetic Vehicle Using Floquet Theory,” Ocean Systems Engineering, Vol. 4, No. 3, pp. 243-261.

Conference Proceedings

1. Nahon, M., Sharf, I., Harmat, A., Khan, W., Michini, M., Speal, N., Trentini, M., Tsadok, T., Wang, T., 2014, International Conference on Unmanned Aircraft Systems (ICUAS’14), “Ground Effect Experiments and Model Validation with Draganflyer X8 Rotorcraft,” Orlando, FL, May 27-30.

2. Wang, C., and Nahon, M., 2014, International Conference on Unmanned Aircraft Systems (ICUAS’14), “Controller Development and Validation for a Small Quadrotor with Compensation for Model Variations,” Orlando, FL, May 27-30.

3. Khan, W., and Nahon, M., 2014, International Conference on Unmanned Aircraft Systems (ICUAS’14), “Improvement and Validation of a Propeller Slipstream Model for Small Unmanned Aerial Vehicles,” Orlando, FL, May 27-30.

4. Nguyen, T., Hori, N., Nahon, M., 2014, “A Discrete-Time Model of Nonlinear Non-Autonomous Systems,” American Control Conference, Portland, OR, June 4-6.

5. Al-Solihat, M. and Nahon, M., 2014, “Mooring and Hydrostatic Restoring of Offshore Floating Wind Turbine Platforms,” OCEANS’14 MTS/IEEE, St. John’s, Nfld, Sept. 14-19.

PAIDOUSSIS, M.

Book 1. Paidoussis, M.P., 2014, Fluid-Structure Interactions: Slender Structures and Axial Flow, Vol. 1, 2nd Edition, Elsevier Academic Press. Journal papers 1. Paak, M., Paidoussis, M.P., Misra, A.K., 2014, “Influence of steady viscous forces on the non-linear behaviour of cantilevered circular cylindrical shells conveying fluid,” International Journal of Non-Linear Mechanics 58,167-183. 2. Paak, M., Misra, M.P., Misra A.K., 2014, “Nonlinear Vibrations of cantilevered circular cylindrical shells in contact with quiescent fluid,” Journal of Fluids and Structures 49, 283-302. 3. Sakuma, Y., Paidoussis, M.P., Price S.J., 2014, “Effect of boundary layer development on the dynamics of trains and train-like articulated systems travelling in confined fluid,” Journal of Wind Engineering and Industrial Aerodynamics 126, 38-47. 4. Kheiri, M., and Paidoussis, M.P., 2014, “On the use of generalized Hamilton's principle for the derivation of the equation of motion of a pipe conveying fluid,” Journal of Fluids and Structures 50. 5. Shen, H., Paidoussis, M.P., Wen, J., Yu, D., Wen, X., 2014, “The beam-mode stability of periodic functionally-graded-material shells conveying fluid,” Journal of Sound and Vibration 333, 2735-2749. 6. Kheiri, M., Paidoussis, M.P., Costa Del Pozo, G., Amabili, M., 2014, “Dynamics of a pipe conveying fluid flexibly restrained at the ends,”Journal of Fluids and Structures 49, 360-385. 7. Gosselin, F.P., and Paidoussis, M.P., 2014, “Dynamical stability analysis of a hose to the sky,” Journal of Fluids and Structures 44, 226-234.

PASINI, D.

Journal Publications

1. Akbarzadeh, A. H., Arian Nik, M., Pasini, D., 2014, “The Role of Shear Deformation in Laminated Plates with Curvilinear Fiber Paths and Embedded Defects,” Composites Structures, Vol. 118, pp. 217-227.

2. Rofouieeragh,i P., Pasini, D., Rey, A., 2014, “Nanostructured Free Surfaces in Plant-based Plywoods,” Colloid and Interface Science Communications, Vol. 1, pp. 23-26.

3. Javid, F., Pasini, D., Angeles, J., 2014, “A New Surgical Barbed Staple for Minimally Invasive Surgery,” ASME Journal of Medical Devices, Vol. 8 (3), 030951.

4. Akbarzadeh, A. H., and Pasini, D., 2014, “Phase-Lag Heat Conduction in Multilayered Cellular Media with Imperfect Bonds,” International Journal of Heat and Mass Transfer, Vol. 75, pp. 656-667.

5. Faisal, T.R., Hristozov, N., Rey, A., Western, T., Pasini, D., 2014, “Computational study of the elastic properties of Rheum rhabarbarum tissues via surrogate models of tissue geometry,” Journal of Structural Biology, Vol. 185, pp. 285–294.

6. Vigliotti, A., Deshpande, V. S., Pasini, D., 2014, “Non linear constitutive models for lattice materials,” Journal of the Mechanics and Physics of Solids, Vol. 64, pp. 44–60.

7. Akbarzadeh, A. H., and Pasini, D., 2014, “Multiphysics of Multilayered and Functionally Graded Cylinders Under Prescribed Hygrothermomagnetoelectroelastic Field,” ASME Journal of Applied Mechanics, Vol. 81(4), 041018-1, 2014.

8. Arian Nik, M., Fayazbakhsh, K., Pasini, D., Lessard, L., 2014, “A comparative study of metamodeling methods for the design optimization of variable stiffness composites,” Composites Structures, vol. 107, pp. 494-501.

9. Arian Nik, M., Fayazbakhsh, K., Pasini, D., Lessard, L., 2014, “Optimization of variable stiffness composites with embedded defects induced by Automated Fiber Placement,” Composites Structures, Vol. 107, pp. 160–166.

Conferences Proceedings:

1. Akbarzadeh, A.H., Fu, J.W., Chen, Z.T., Pasini, D., 2014, ASME 2014 International Mechanical Engineering Congress & Exposition, “Magnetoelastic analysis of sandwich cellular cylinders,” Montreal, November 14-20.

2. Akbarzadeh, A.H., Arian Nik, M., Pasini, D., 2014, ASME 2104 International Mechanical Engineering Congress & Exposition, “Structural Analysis of Variable Stiffness Laminated Plates using First-order Shear Deformation Theory,” Montreal, November 14-20.

3. Faisal, T.R., Hristozov, N., Rey, A., Western, T., Pasini, D, 2014, ASME 2014 International Mechanical Engineering Congress and Exposition, “A Multi-scale Model to determine the Stiffness of Collenchyma Tissue in Rheum Rhabarbarum,” Montreal, November 14-20.

4. Rafsanjani, A., Brulé, V., Western, T., Pasini, D., 2014, ASME 2014 International Mechanical Engineering Congress and Exposition, “Mechanics of water actuation in resurrection plant Selaginella lepidophylla,” Montreal, November 14-20.

5. Brulé, V., Rafsanjani, A., Pasini, D., Western, T., 2014, ASME 2014 International Mechanical Engineering Congress and Exposition, “Investigating Hygroactuation using Selaginella lepidophylla as a Model System,” Montreal, November 14-20.

6. Akbarzadeh, A. H., Pasini, D., 2014, 13th International Conference on Multiscale, Multifunctional and Functionally Graded Materials, “Multiphysics of Functionally Graded Smart Cylinders,” Sao Paulo, Brazil, October 19 - 22.

7. Pasini, D., 2014, 7th World Congress of Biomechanics, “A Microarchitectured Lattice Material for Isoelastic Hip Endoprosthesis,” Boston, July 6-11.

8. Fayazbakhsh, K., Arian Nik, M., Pasini, D., Lessard, L., 2014, 1st International Conference on Mechanics of Composites, “Manufacturing aspects of laminates with curvilinear fibers made by Automated Fiber Placement,” Stony Brook University, NY, USA, June 8-12.

9. Gogarty, E., and Pasini, D., 2014, International Conference on Engineering and Applied Sciences Optimization, “Hierarchical topology optimization for bone tissue scaffold,” Kos, Greece, June 4-6.

10. Khanoki, S. A., Pasini, D., 2014, International Conference on Engineering and Applied Sciences Optimization, “A functionally graded lattice material for a bone preserving hip implant,” Kos, Greece, June 4-6.

11. Akbarzadeh, A. H., and Pasini, D., 2014, Canadian Society for Mechanical Engineering International Congress 2014, “Heat conduction in functionally graded porous materials,” Toronto, Ontario, Canada, June 1-4.

12. Pasini, D., 2014, AmeriMech Symposium on Dynamics of Periodic Materials and Structures, “Multiobjective optimization of a graded lattice for hip replacement: integration of manufacturing and bone growth requirements,” Atlanta, Georgia (USA), April 2-4.

SHARF, I.

Journal Publications

1. Persson, S.M., Sharf, I., 2014, “Sampling-based A* Algorithm for Robot Path-planning,” International Journal of Robotics Research, Vol. 33, 2014, pp. 1683-1708.

Conference Proceedings

1. Sharf, I., Nahon, M., Harmat, A., Khan, W., Michini, M., Speal, N., Trentini, M., Tsadok, T., Wang, T., 2014, ICUAS 2014 International Conference on Unmanned Aircraft Systems, “Ground Effect Experiments and Model Validation with Draganflyer X8 Rotorcraft,” Orlando, FL, May 27-30, pp. 1158-1166.

2. Zhang, M., Harmat, A., Sharf, I., 2014, 2014 International Conference on Intelligent Unmanned Systems, “Autonomous Flight of a Quadrotor Using Multi-Camera Visual SLAM,” Montreal, Sept. 29-Oct.1.

3. Harmat, A., and Sharf, I., 2014, Proc. Conference on Computer and Robot Vision, CRV2014, “Towards full omnidirectional depth sensing using active vision for small unmanned aerial vehicles,” Montreal, May 6- 9, pp. 24-31.

4. Zhang, F., Sharf, I., Misra, A. K., 2014, 24th AAS/AIAA Space Flight Mechanics Meeting, Spaceflight Mechanics 2014, “On-Line Mass Estimation for a Tethered Space Debris During Post-Capture and Retrieval,” Santa Fe, NM, January, 12pgs.

TIMOFEEV, E.

Journal Publications

1. Kleine, H., Timofeev, E., Hakkaki-Fard, A., Skews, B., 2014, “The influence of viscosity on the triple point trajectories at shock reflection off cylindrical surfaces,” Journal of Fluid Mechanics, Vol.740, pp.47-60.

Conference Proceedings

1. Ogawa, H., Molder, S., Timofeev, E., Hornung, H., Shoev, G., Bondar, Y., Ohtani, K., Obayashi, S., 2014, Proc. of the 11th International Conference on Flow Dynamics, “Numerical investigation of wave reflections at the centerline of stunted Busemann intakes,” Sendai, Japan, Oct. 8-10, 2p.

2. Timofeev, E., Hakkaki-Fard, A., 2014, In: Podlaskin A., Krasovskaya I. (Eds.), Book of Proc. of 21st International Shock Interaction Symposium, “On unsteady shock reflections from convex circular surfaces,” University of Latvia, Riga, Aug. 3-8, 2014, p.237-238.

3. Alzamora Previtali, F., Timofeev, E., 2014, In: Podlaskin A., Krasovskaya I. (Eds.), Book of Proc. of 21st International Shock Interaction Symposium, “On shock reflection from the straight wedges with circular concave tips,” University of Latvia, Riga, Aug. 3-8, 2014, p.236.

4. Norouzi, F., and Timofeev E., 2014, In: Onate E., Oliver J. & Huerta A. (Eds.), Proc. of the WCCM XI – ECCM V – ECCM VI “A hybrid, explicit-implicit, second order in space and time

TVD Scheme for two-dimensional compressible flows,” Barcelona, Spain, July 20-25, Vol.5, pp.4820-4831.

5. Moradian, N., and Timofeev E., Tahir R., Molder S., 2014, AIAA, “Startability analysis of Busemann intakes with overboard spillage,” Paper 2014-3227, 11p.

6. Norouzi F., and Timofeev E., 2014, Proc. of the 22nd Annual Conference of CFD Society of Canada, “A hybrid explicit-implicit second order TVD scheme for unstructuredgrids: the 2D Euler equations case,” Toronto, ON, June 1-4, 6p.

VENGALLATORE, S.

Journal Publications

1. Joshi, S., Hung, S., Vengallatore, S., 2014, “Design strategies for controlling damping in micromechanical and nanomechanical resonators,” European Physical Journal–Techniques and Instrumentation, vol. 1, article no. 5, 15 pages.

2. Amoako-Tuffour, Y., Jones, M. L., Shalabi, N., Labbé, A., Vengallatore, S., Prakash, S., 2014, “Ingestible Gastrointestinal Sampling Devices: State-of-the-Art and Future Directions,” Critical Reviews in Biomedical Engineering, vol. 42, pp. 1-15.

3. Kuter-Arnebeck, O., Labuda, A., Joshi, S., Das, K., Vengallatore, S., 2014, “Estimating damping in micromechanical resonators by measuring thermomechanical noise using laser Doppler vibrometry,” IEEE/ASME Journal of Microelectromechanical Systems, vol. 23, pp. 592-599.

ZHAO, Y.F.

Journal Publications

1. Xu, X., Meteyer, S., Perry, N., Zhao, Y.F., 2014, “Energy consumption model of Binder-Jetting Additive Manufacturing Processes”, Special Issue on Energy-Aware Manufacturing Operations, International Journal of Production Research, available online July 24.

Conferences

1. Meteyer, S., Xu, X., Perry, N., Zhao, Y.F., 2014, “Energy and Material Flow Analysis of Binder-jetting Additive Manufacturing Processes", Procedia CIRP (the International Academy for Production Engineering) of 21st CIRP Conference on Life Cycle Engineering, Vol.15, pp 19-25.

2. Tang, Y., Hascoet, J.-Y. Zhao, Y.F., 2014, Proceedings of the ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, “Integration of Topological and Functional Optimization in Design for Additive Manufacturing,” Denmark, June 25-27.

3. Tang, Y., and Zhao, Y.F., 2014, ASME 2014 International Mechanical Engineering Congress & Exposition, “Design Method for Lattice-Skin Structure Fabricated by Additive Manufacturing,” Montreal, Quebec, November 14-20.

4. Zhou, Y., Chen, H., Tang, Y., Gopinath, S., Xu, X., Zhao, Y.F., 2014, International Conference on Innovative Design and Manufacturing, “Simulation and Optimization Framework for Additive Manufacturing Processes,” Montreal, Quebec, August 13-15.