Turn

in

g Your Assets into Dollars

Public AuctionPLANT

CLOSED

BE PROMPT

QUICK SALE

Asset Sales, Inc.Corporate Headquarters

301 Post Office Drive, Suite CIndian Trail, NC 28079

Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325 www.asset-sales.com info@asset-sales.com

European Headquarters6 Hill End Close, Norwood GreenHalifax, West Yorkshire, HX3 8RH

Tel / Fax 07836.347880peteraml@asset-sales.co.uk

Asset Sales (Canada) Inc.4310 Prospect Road

Bayside, Nova Scotia, Canada B3Z 1L5Tel 902.852.5331 Fax 704.821.4325

gmuller@asset-sales.ca

PLANT CLOSED

FUTURE MANUFACTURING INC.PRECISION CNC MACHINE SHOP, MORI SEIKI, FANUC ROBODRILL, TOOLING & MORE

1700 RIVERFORK DRIVE - HUNTINGTON, IN 46750TUESDAY, APRIL 19TH @ 10:00 A.M. EDT

Inspection: Monday, April 18th, From 8:00 A.M. - 4:00 P.M. EDT

(2) FANUC ROBODRILL a-T21ID CNC DRILL / TAPPING CENTERS

(2) MORI SEIKI NL2500 SY/700 CNC TURNING CENTERS

(2) MORI SEIKI NL2000 SMC/500 CNC TURNING CENTERS

(2) MORI SEIKI DURA VERTICAL 5100 CNC VERTICAL MACHINING CENTERS

2007

2AVAIL.

2AVAIL.

2AVAIL.

2AVAIL.

2010 2009

2004

104157_Future.indd 1 3/23/16 1:18 PM

MACHINERY INSPECTION DATE & TIME – MONDAY, APRIL 18TH FROM 8:00 A.M. - 4:00 P.M. EDT

2

CNC TURNING CENTERS(2) MORI SEIKI Model NL2500 SY/700 CNC Turning Centers with Sub-Spindle & Y-Axis, 10” Power Chuck on Main Spindle, 6” on Sub-Spindle, Turret with Milling & Y-Axis, Parts Catcher, Probing, Chip Conveyor & Mori MSX-850 CNC Control, sn:NL251ED0759, mfg.2005 ● sn:NL251JC5320, mfg.2010 **EDGE REBEL 102 Servo SE Magazine Barfeed (may be sold separate)

MORI SEIKI Model NL2000 SY/500 CNC Turning Center with Sub-Spindle & Y-Axis, Collet Chuck on Main Spindle, Sub-Spindle, Turret with Milling & Y-Axis, Parts Catcher, Probing, Chip Conveyor & Mori MSX-850II CNC Control, sn:NL201IK3012, mfg.11/2009 **EDGE REBEL 102 Servo S2 Magazine Barfeed (may be sold separate)

(2) MORI SEIKI Model NL2000 SMC/500 CNC Turning Centers with Sub-Spindle & Milling, (1 with) 8” 3-Jaw Chuck & (1 with) Collet Chuck on Main Spindle, Sub-Spindle, Turret with Milling, Parts Catcher, Probing, Chip Conveyor & Mori MSX-850 II CNC Control, sn:NL201GJ2122, mfg.10/2007 **LNS Quickload Servo 65 Magazine Barfeed (may be sold separate) ● sn:NL201G12099, mfg.2007

MORI SEIKI NL2500 SY/700 CNC TURNING CENTER

MORI SEIKI NL2000 SY/500 CNC TURNING CENTER

MORI SEIKI NL2500 SY/700 CNC TURNING CENTER

MORI SEIKI NL2000 SMC/500 CNC TURNING CENTER

Want to Sell Your Shop or Know Someone Who Does? Call Us Toll Free at (888) 800-4442! We Pay Great Finder’s Fees!

2010 2005

2AVAIL.

2009

2AVAIL.

2AVAIL.

Download a lot book at www.asset-sales.com

2007

104157_Future.indd 2 3/23/16 1:19 PM

AUCTION SALE DATE & TIME – TUESDAY, APRIL 19TH @ 10:00 A.M. EDT

3

CNC TURNING CENTERS (continued)(2) MORI SEIKI Model CL 2000 BT CNC Turning Centers with 8” 3-Jaw Power Chuck, Approx. 24” Center Distance to Tailstock, Turret, Chip Conveyor, Mori MSC-805 CNC Control, sn:CL201CL1143, mfg.2004 ● sn:CL201CA0576, mfg.2003

MORI SEIKI Model CL 1500 CNC Chucking Lathe with 6” 3-Jaw Power Chuck, Chip Conveyor, Mori MSG-803 CNC Control, sn:CL15AG0015, mfg.2001

Large Assortment of MORI SEIKI Live & Static Toolholders

CNC VERTICAL MACHINING CENTERS(2) MORI SEIKI Model DURA Vertical 5100 CNC Vertical Machining Centers with 24” x 53” Tables, #40 Taper Spindle Speeds to 10,000 RPM, 41.3" X-Axis Travel, 20.9" Y-Axis, 20.1" Z-Axis, 30 ATC, High Pressure Thru-Spindle Coolant, sn:DV005GG1049, mfg.7/2007 ● sn:DV005HG1621, mfg.8/2009

LEADWELL Model V-30 CNC Vertical Machining Center with 15.7” x 35” Table, #40 Taper Spindle Speeds to 8000 RPM, 30” X-Axis Travel, 16” Y-Axis, 16” Z-Axis, 24 ATC, FANUC Oi-MC CNC Control, sn:L2TJF0455, mfg.2006

MITSUBISHI Model M-V4B CNC Vertical Machining Center with 16” x 35” Table, #40 Taper Spindle Speeds to Approx. 8000 RPM, 18 ATC, 22” X-Axis Travel, 16” Y-Axis, 18” Z-Axis, MELDAS CNC Control (machine needs repair)

MACHINES CONTINUED ON PAGE 4

MORI SEIKI CL2000 BT CNC TURNING CENTER MORI SEIKI CL2000 BT CNC TURNING CENTER

2004 2003

2AVAIL.

MORI SEIKI CL1500 CNC TURNING CENTER

2001

MORI SEIKI DURA VERTICAL 5100 CNC VERTICAL MACHINING CENTERS

2AVAIL.

20072009

BE PROMPT / QUICK SALE

104157_Future.indd 3 3/23/16 1:19 PM

MACHINERY INSPECTION DATE & TIME – MONDAY, APRIL 18TH FROM 8:00 A.M. - 4:00 P.M. EDT

4

CNC TAPPING / DRILLING CENTERS

FANUC Robodrill α-T21iD CNC Drill / Tapping Center with 16” x 33” Table, #30 Taper Spindle Speeds to 20,000 RPM, 21 ATC, 16.1” X-Axis Travel, 27.6” Y-Axis, 15.7” Z-Axis, Coolant, FANUC 16i-MB CNC Control, sn:04ZUN850, mfg.12/2004

(2) FANUC Robodrill α-T14iFA CNC Drill / Tapping Centers with 15.7” x 25.6” Table, #30 Taper Spindle Speeds to 10,000 RPM, 14 ATC, 19.7” X-Axis Travel, 15.7” Y-Axis, 13” Z-Axis, Coolant, FANUC 31i-MODA5 CNC Controls, sn:P10XXA395, mfg.2010 ● sn:P10XXA396, mfg.2010

BROTHER Model TC-S2B CNC Drill / Tapping Center with 12” x 24” Table, #30 Taper Spindle Speeds to 10,000 RPM, 14 ATC, 27.6” X-Axis Travel, 14.2” Y-Axis, 10.6” Z-Axis, Coolant, BROTHER CNC Control, sn:111487, mfg.12/2004

CNC MACHINING ACCESSORIESHAAS 8” 4th Axis Indexer Model HRT210 with Control Box, sn:227957

(3) HARDINGE 5’C’ Collet Indexers with Control Boxes, sn:2613 ● sn:536 ● n/a

(11+) KURT Machine Vises, Huge Assortment of #30 / #40 Taper Toolholders, C4 Boring Adaptors, Quick Change Tool Heads, Collets, Endmills, Taps, Drills, Reamers, Etc.

INSPECTIONHELMEL PHOENIX CNC Coordinate Measuring Machine with 18” x 26” Granite Table, 12” X-Axis Travel, 12” Y-Axis, 10” Z-Axis, Renishaw RTP20 Tilt Probe, Grommet Software, Remote & Joystick Controls, sn:01-54, mfg.11/2010

HARDROCKER Hardness Tester Model HR-150A, mfg.2008

Assortment of Height Gages, Calipers, Micrometers, Thread & Plug Gages, Granite Surface Plates, Etc….

FANUC ROBODRILL a-T21iD CNC DRILL / TAPPING CENTER

>MITSUBISHI M-V4B

CNC VERTICAL MACHINING

CENTER

<LEADWELL V-30 CNC VERTICAL MACHINING CENTER2006

2004

BROTHER TC-S2B CNC DRILL / TAPPING CENTER

(2) FANUC ROBODRILL a-T14iFA CNC DRILL / TAPPING CENTERS

2010 20042AVAIL.

104157_Future.indd 4 3/23/16 1:19 PM

AUCTION SALE DATE & TIME – TUESDAY, APRIL 19TH @ 10:00 A.M. EDT

5

HELMEL PHOENIX CNC CMM

FORKLIFTS / SWEEPERCATERPILLAR 5500lb Capacity Forklift Model P6000 with 3-Stage Mast, Side Shift, Forkshift, 4 Tires, Gas, Fork Positioning Rotator, sn:AT13F02064

RAYMOND 3500lb Capacity Stand-Up Electric Forklift Model DSS350TT with 2-Stage Mast, Side Shift, Battery Charger, sn:S350-01714-97

TENNANT Electric Floor Sweeper

AIR COMPRESSORSKAESER Model SK15 15HP Rotary Screw Air Compressor, sn:1940, mfg.2010

GARDNER DENVER 10HP Reciprocating Air Compressor

HANKISON Air Dryer

CATERPILLAR 5500LB CAPACITY FORKLIFT RAYMOND 3500LB ELECTRIC FORKLIFT

MISCELLANEOUSDump Hoppers, Pallet Racking, Digital Floor Scale, Tool Room Cabinets & Tooling, MILLER Millermatic 252 Portable Welder, Wet / Dry Vacuums, Work Benches

OFFICESExecutive Office Furniture, Photo Copier, Etc…

2010 2008

3AVAIL.

2010

104157_Future.indd 5 3/23/16 1:19 PM

Turn

ing Your Assets into Dollars Asset Sales, Inc.

Corporate Headquarters301 Post Office Drive, Suite C

Indian Trail, North Carolina 28079Toll Free: 888.800.4442 Direct: 704.821.4315

Fax: 704.821.4325 – www.asset-sales.comAsset Sales Inc. • Lance Mannion – Indiana License #AU19900099

(8) MORI SEIKI CNC TURNING CENTERS

DIRECTIONS: From Ft. Wayne International Airport: Exit Airport toward I-69, Merge onto I-69 to Indianapolis for 12 miles. Take exit 286 for US224 toward Huntington / Decatur. Turn right onto US-224 W/E Markle Rd for 6.7 miles. Turn left onto IN-5S. Turn right onto Waterworks Rd, 1.9 miles. Turn left onto Etna Ave. Turn right onto W200N. Turn right onto Riverforks Rd. Plant will be on the right, follow auction signs.

HOTELSHoliday Inn (260) 356-3434 22205 N. Jefferson St. - Huntington, IN 46750

Hilton Garden Inn Ft. Wayne (260) 435-1777 8615 US 24 West - Ft. Wayne, IN 46804

UPCOMING AUCTIONSThursday, April 26th - Major Mfg.Fabrication, Press Brakes & Plasma BurningAbbeville, SC

PUBLIC AUCTIONPLANT CLOSED

FUTURE MFG.PRECISION CNC MACHINE SHOP, MORI

SEIKI, FANUC ROBODRILL, TOOLING & MOREHUNTINGTON, IN

TUESDAY, APRIL 19TH @ 10:00 A.M. EDT

ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE.

Subject to amendments and modifications announced by the auctioneer at the time of the auction, any person participating in the auction shall be bound by the following terms and conditions. The auctioneer does not warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein.

All articles will be sold to the highest bidder conforming to the bid process in accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be re-moved in the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale.

All payments shall be by way of cash, certified check, wire transfer and/or a company check accompanied by a bank letter of guarantee payable

to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All bidders are responsible for all applicable taxes.

Rigging/Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.

ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS. A 15% Buyer’s Premium will apply to all onsite purchases and a 18% Buyer’s Premium for online purchases.

REGISTRATION & BIDDING ONLINE:If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms and Conditions.

ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING.

ASSOCIATION OFMACHINERY AND

EQUIPMENT APPRAISERS

PresortedFirst Class Mail

U.S. PostagePAID

Kokomo, INPermit No. 154

8AVAIL.

2003 to

2010

Wednesday, May 11th & Thursday, May 12th - Joy GlobalLate Model Large Capacity HBM & HMCBrook Park, OH

Tuesday, May 3rd - CMtLate Model CNC Turning, Boring, Machining & WeldingEast Moline, IL

BE PROMPT / QUICK SALE

104157_Future.indd 6 3/23/16 1:19 PM