PTH 50 Series · 2008-10-30 · Crown’s hand pallet trucks are no exception. On the PTH 50...
Transcript of PTH 50 Series · 2008-10-30 · Crown’s hand pallet trucks are no exception. On the PTH 50...
Ergonomic HandlePackageThe handle thickness andangled shape were chosento provide the most fatigue-free operation. A few strokesof the large steering handleresult in 5" of lift, while loadscan be quickly deposited bypulling the convenient three-position lever. The neutralposition eliminates backpressure from the pumpallowing the operator to handle the load rather thanfight the truck. In addition,the handle is spring-loadedso that it will return to a verti-cal position when released.
A Reputation for Excellence in ExecutionThe Crown PTH 50 Seriesproves that it’s not the size ofthe truck that matters, buthow well it’s suited for aparticular application. Crownhas built a reputation bybuilding reliable lift trucksthat get the job done in thebest possible way. AndCrown’s hand pallet trucksare no exception. On thePTH 50 Series, every featureis matched by serviceabilityand excellence in execution.Because no matter howsmall the job, performance isof the highest priority.
Reliability Comes by DesignThe Crown PTH 50 Series isdesigned to give youperformance, from the firstday of use until long after ithas proved itself as asuperior pallet mover day inand day out. This level ofreliability never comes bychance, but only by design.
Crown engineers havedesigned every movingand lifting part of the PTH50 Series to handle thestresses of your workingenvironment. You’ll recog-nize reliability in every fea-ture and function, from itshydraulic lifting capability(5000 lb capacity) to itsefficiency of operation andsimplicity of service.
Features■ Crown Built Durability■ 5000 lb Capacity■ 2.9" Lowered Height■ Articulated Steer Wheels■ Low Rolling Resistance■ Dual Entry/Exit System■ Box Section Style
Push Rods■ C-Channel Design of
Forks■ Ergonomic Handle
Package■ Less Service, More Use
Articulated Steer Wheels Crown manufactures thesteer and load wheelsbecause these componentsare critical to durability, aswell as handling andcontrol. The 7" steer wheelsimprove handling and con-trol, while articulated wheelsensure continual contactwith the floor, which isespecially important onuneven surfaces.
Low Rolling ResistanceHigh quality compoundsand bearings are used tolower rolling resistance,provide longer wear andensure smooth and quietoperation.
Crown BuiltDurability
Performance
Less Service, More UseThe design starts with astrong, robust frame and linkages. It then incorporatesa high level of serviceabilityto simplify maintenance andprolong equipment life.
The Crown PTH 50 Seriesfeatures extensive use ofbushings and bearings thatare sealed for life, whicheliminates all but one greasezerk. Other hand pallettrucks feature grease zerksthat require frequent
5000 lb CapacityGo ahead and load it up.From the innovative strengthridges on the apron to thethick reinforcement on thelower handle, this hand pallettruck is designed to take it.
2.9" Lowered HeightPallet entry is improved withforks that can be lowered to2.9". Non-standard palletsbecome a non-issue.
Crown Built Durability The PTH 50 Series has all theright answers to the questionof durability. Durability startswith a deep, low-profileframe cross brace betweenthe forks and continues withthe steel forgings used onthe lift link arms. Its hydraulicunit is built to withstand thou-sands of lift/lower cycles.The bushings in the lift struc-ture of the PTH 50 Series areof the same durable designused in all Crown trucks, aTeflon-impregnated bronzewith steel backing. Even thehub cap enhances overalldurability, protecting thebearing and steer axle fromside impact damage.
ReliabilityComes by
Designmaintenance and closeattention. And, unlike otherhand pallet trucks thatrequire complete replace-ment of failed hydraulicunits, the Crown PTH 50Series has accessible partsthat can easily be main-tained. These differencesand the many other uniquefeatures you’ll find on thePTH 50 Series can onlycome from a companywhose commitment todesign excellence is exhibit-ed throughout its entireproduct line.
Dual Entry/Exit SystemDual systems that combinerollers and ramps areprovided for both pallet entryand exit. The metal rampsallow the pallet boards toslide onto the rollers which inturn ensures that thePTH 50 Series will virtuallyglide in and out of any pallet.
Box-Section Style PushRodsThe application of box-section style push rods,which are stronger andmore durable than other
push rod designs, alsodemonstrates Crown’scommitment to reliability.
C-Channel Design of ForksFor maximum strength, forksare made from C-channel-design formed steel withsteel reinforcing members atkey stress areas. Standardfork lengths are availablefrom 36" to 72", and otherlengths are available. Overalllength is only another 14",which gives these trucksexcellent maneuverability insmaller spaces.
PTH 50 SeriesSpecifications
PTH 50 SeriesTechnical Information
(A) (B) Load (C) Load WeightModel Width Fork Wheel Wheel (lb)Length Lowered Raised
PTH 50 16-36 "15.8" "36" "29.5" "23.5" 132
PTH 50 18-42 17.7 42 35.5 29.5 141
PTH 50 18-48 17.7 48 41.5 35.5 148
PTH 50 20-36 20.5 36 29.5 23.5 137
PTH 50 20-42 20.5 42 35.5 29.5 143
PTH 50 20-48 20.5 48 41.5 35.5 150
PTH 50 27-36 27.5 36 29.5 23.5 143
PTH 50 27-42 27.5 42 35.5 29.5 150
PTH 50 27-48 27.5 48 41.5 35.5 159
PTH 50 27-54 27.5 54 47.5 41.5 174
PTH 50 27-60 27.5 60 53.5 47.5 187
PTH 50 27-72 27.5 72 65.5 59.5 209
Capacity ....................5000 lb
Width of each fork ........6.3"
Lift .........................................5"
OptionalSkid Adaptor – Increases lowered height to 5.5" to permit skid handling. Raisedheight increases to 10.5".Adaptor latches in verticalposition when truck is neededfor handling pallets. Availablefor 20.5" and 27" width models in fork lengths of 36", 42" and 48" only.
Load Backrest – Constructedof 5/16" steel, backrests areavailable in 48" and 60" sizes.Bolt-on installation allows themto be retrofitted to existingPTHs in the field. Aftermarketkits are available from yourCrown dealer.
Crown Equipment CorporationNew Bremen, Ohio 45869 USATel 419-629-2311Fax 419-629-3796crown.com
14" + A
14"
BA
o⁄ 2.95" x 4"o⁄ 7" x 2"
48"
2.95"
7.95"5"
6.3"
PTH–16 15.8"PTH–18 17.7"PTH–20 20.5"PTH–27 27"
C
C
PTH
C
Because Crown is continually improving its products, specifications are subject to changewithout notice.
Crown and the Momemtum symbol aretrademarks of Crown Equipment Corporation.
Copyright 2002 Crown Equipment CorporationSF12208 Rev.1/05Printed in U.S.A.
Polyurethane wheels
Steer wheels...Ø 7 x 2" wideLoad wheels.Ø 2.9 x 4" wide