PTH 30 - Pezzolato · PTH 30.70 Multi-knives system drum These chippers guarantees the production...
Transcript of PTH 30 - Pezzolato · PTH 30.70 Multi-knives system drum These chippers guarantees the production...
-
G R E E N L I N E
www.pezzolato.itVia Prov. Revello 89, Envie (CN)Tel. +39 0175 278077 - Fax +39 0175 278421 - [email protected]
Pezzolato SpA
Plank LineRed LineGreen Line
PTH 900/820 E
PTH 30.70
Drum wood chipper with big feeding hopper
Drum ChipperPTH 30.70
-
2
PTH 30.70It’s the basic model of the range, however, it is appreciated for the typically robust structure of Pezzolato drum chippers, ensuring reliability and excellent performance.The machine has been designed to ensure for operator the ease of use and to minimize maintenance costs. The wear parts of all machines are cost effective
and simple to replace in short maintenance times.Powered by tractor Power Take Off or provided with autonomous diesel engine.The big hopper, the upper roller of large dimensions and the lower roller facilitate the material’s inlet in the chipping apparatus. The machine can be fed either manually or with
Space saving during transportation Big feeding hopper
-
3
PTH 30.70
Multi-knives system drum These chippers guarantees the production of calibrated chips
mechanical means. For manual feeding the chipper is equipped with a robust safety bar that provides safety using the machine.The cutting system characterized by the closed drum and the sieving grid that is interchangeable depending on the requirements, allow to obtain a uniform and homogeneous wood chips even for the boilers of domestic use.
The fan with a large diameter allows to eject the chips through the discharge pipe fitted, at the end, of adjustable deflector.The NO STRESS electronic device, supplied as standard, automatically regulates the in-feed of material according to the available power.
-
www.pezzolato.it
www.pezzolato.itVia Prov. Revello 89, Envie (CN)Tel. +39 0175 278077 - Fax +39 0175 278421 - [email protected]
Pezzolato SpA
Plank LineRed LineGreen Line
PTH 900/820 E
Pezzolato Officine Costruzioni Meccaniche SpA Via Provinciale Revello, 89 | 12030 Envie (CN) ITALIATel. +39 0175 278077 | Fax +39 0175 278421 | [email protected]
NO STRESS electronic device, available on all standard machines, automatically regulates the in-feed of material according to the available power
Sieving grids for chip calibration with different sizes, easy to replace
Radio or cable remote control, to manage the chippers main activities at a distance
Removable security bar, for hand or crane feeding
Low- or high-speed towing trailer, with air or hydraulic brakes
Forestry cranes, with or without cabin, in customized configuration
“M version” machine, driven by Diesel engine
EXTRAS AND CONFIGURATIONS
Sieving gridsForestry cranes
Radio remote control
TECHNICAL DATA PTH 30.70
Minimum tractor power: Hp 70
Maximum tractor power: Hp 130
Diesel engine power: Hp 126
Maximum inlet passage: mm 640 x 300
Knives: n° 3
Maximum chipping diameter*: mm 300
Drum width: mm 640
Drum diameter: mm 520
Upper and lower roller width: mm 640
Hourly troughthput*: m3/h 18 - 25
PTH
30.
70 |
07 •
18 |
ENG
DEALER
Prog
ress
and
con
stan
t res
earc
h m
ay m
odify
som
e te
chni
cal d
ata
and
desc
riptio
ns a
s des
crib
ed in
this
leafl
et, w
ithou
t Pez
zola
to S
pA w
arni
ng it
s rea
ders
.
Driven by Diesel engine
* Diameters and declared production are variable according to the available power, wood type and chip size.