PT Programming Manual - Yahoolib.store.yahoo.net/lib/yhst-48720707184578/manual-tda...2 PT...
Transcript of PT Programming Manual - Yahoolib.store.yahoo.net/lib/yhst-48720707184578/manual-tda...2 PT...
Thank you for purchasing a Panasonic Hybrid IP-PBX.Please read this manual carefully before using this product and save this manual for future use.
KX-TDA50: PSMPR Software File Version 4.0000 or laterKX-TDA100/KX-TDA200: PMPR Software File Version 3.2000 or laterKX-TDA600: PLMPR Software File Version 3.1000 or later
Document Version: 2007-01
KX-TDA50/KX-TDA100Model KX-TDA200/KX-TDA600
Hybrid IP-PBX
PT Programming Manual
Introduction
About this Programming ManualThe PT Programming Manual is designed to serve as a reference to programming the Panasonic Hybrid IP-PBX using a Panasonic proprietary telephone (PT) with display.
The PT Programming Manual is divided into the following sections:
Section 1, OverviewProvides an overview of programming the PBX.
Section 2, PT ProgrammingServes as reference operating instructions when using a display PT to program the PBX.
Section 3, AppendixProvides a list of all related PT programming items for each feature as Feature Programming References.
References Found in the PT Programming Manual
PT Programming Manual ReferencesRelated sections of the PT Programming Manual are listed for your reference.
Feature Manual ReferencesThe Feature Manual explains what the PBX can do, as well as how to obtain the most of its many features and facilities. Sections from the Feature Manual are listed throughout the PT Programming Manual for your reference.
Installation Manual ReferencesThe Installation Manual provides instructions detailing the installation and maintenance of the PBX. Sections from the Installation Manual are listed throughout the PT Programming Manual for your reference.
Links to Other Pages and ManualsIf you are viewing this manual with a PC, certain items are linked to different sections of the PT Programming Manual and other Hybrid IP-PBX manuals. Click on a link to jump to that section.
Linked items include:
• Installation Manual References
• PT Programming Manual References
• Feature Manual References
WARNING
Unplug the PBX from the AC outlet if it emits smoke, an abnormal smell or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorized Panasonic Factory Service Center.
2 PT Programming Manual
NOTES• The contents of this manual apply to PBXs with a certain software version, as indicated on the
cover of this manual. To confirm the software version of your PBX, see [190] Main Processing (MPR) Software Version Reference.
• Some optional service cards, PTs, and features are not available in some areas. Additionally, some optional service cards and features are not available for some PBX models. Please consult your certified Panasonic dealer for more information.
• Product specifications are subject to change without notice.
PT Programming Manual 3
Table of Contents
1 Overview.................................................................................................. 71.1 Introduction ......................................................................................................................81.1.1 Introduction ........................................................................................................................81.1.2 Password Security..............................................................................................................81.1.3 Entering Characters ...........................................................................................................9
2 PT Programming................................................................................... 112.1 PT Programming ............................................................................................................122.1.1 Programming Instructions ................................................................................................122.1.2 Maximum Values..............................................................................................................142.1.3 Basic Programming..........................................................................................................16
[000] Date & Time............................................................................................................................................ 16[001] System Speed Dialing Number .............................................................................................................. 17[002] System Speed Dialing Name.................................................................................................................. 17[003] Extension Number .................................................................................................................................. 17[004] Extension Name ..................................................................................................................................... 17[005] Extension Personal Identification Number (PIN) .................................................................................... 17[006] Operator Assignment.............................................................................................................................. 18[007] DSS Console Paired Telephone ............................................................................................................. 18[008] Absent Message..................................................................................................................................... 18
2.1.4 System Management Programming.................................................................................18[100] Flexible Numbering................................................................................................................................. 18[101] Time Service Switching Mode ................................................................................................................ 19[102] Time Service Starting Time.................................................................................................................... 19[103] Idle Line Access (Local Access)............................................................................................................. 19[110] System Password for Administrator—for PT Programming .................................................................... 19[111] System Password for User—for PT Programming.................................................................................. 19[112] Manager Password................................................................................................................................. 20[120] Verification Code .................................................................................................................................... 20[121] Verification Code Name.......................................................................................................................... 20[122] Verification Code Personal Identification Number (PIN) ......................................................................... 20[123] Verification Code COS Number.............................................................................................................. 20[190] Main Processing (MPR) Software Version Reference ............................................................................ 21
2.1.5 Timer Programming .........................................................................................................21[200] Hold Recall Time .................................................................................................................................... 21[201] Transfer Recall Time............................................................................................................................... 21[203] Intercept Time......................................................................................................................................... 21[204] Hot Line Waiting Time ............................................................................................................................ 21[205] Automatic Redial Repeat Times (KX-TDA100/KX-TDA200/KX-TDA600 only) ....................................... 21[207] Door Unlock Time................................................................................................................................... 21[208] Call Duration Count Starting Time for LCOT .......................................................................................... 22[209] DISA Delayed Answer Time ................................................................................................................... 22[210] DISA CO-to-CO Line Call Prolong Time................................................................................................. 22[211] DISA Intercept Time ............................................................................................................................... 22
2.1.6 TRS/ARS Programming ...................................................................................................22[300] TRS Override by System Speed Dialing ................................................................................................ 22[301] TRS Denied Code .................................................................................................................................. 22[302] TRS Exception Code.............................................................................................................................. 23[303] Special Carrier Access Code ................................................................................................................. 23[304] Emergency Number................................................................................................................................ 23[320] ARS Mode .............................................................................................................................................. 23[321] ARS Leading Number............................................................................................................................. 23[322] ARS Routing Plan Table Number ........................................................................................................... 23[325] ARS Exception Number.......................................................................................................................... 23
4 PT Programming Manual
[330] ARS Routing Plan Time Table.................................................................................................................24[331–346] ARS Routing Plan Table (1–16) (KX-TDA50/KX-TDA100/KX-TDA200 only) ..................................24[347] ARS Routing Plan Table (1–48) (KX-TDA600 only) ................................................................................24[350] ARS Carrier Name ..................................................................................................................................24[351] ARS Trunk Group for Carrier Access ......................................................................................................24[352] ARS Removed Number of Digits for Carrier Access...............................................................................25[353] ARS Carrier Access Code ......................................................................................................................25
2.1.7 CO Line Programming ..................................................................................................... 25[400] LCOT CO Line Connection .....................................................................................................................25[401] LCOT CO Line Name..............................................................................................................................25[402] LCOT Trunk Group Number ....................................................................................................................25[409] LCOT CO Line Number Reference .........................................................................................................26[410] LCOT Dialing Mode.................................................................................................................................26[411] LCOT Pulse Rate ....................................................................................................................................26[412] LCOT DTMF Minimum Duration .............................................................................................................26[413] LCOT CPC Signal Detection Time—Outgoing........................................................................................26[414] LCOT CPC Signal Detection Time—Incoming........................................................................................26[416] LCOT Pause Time...................................................................................................................................26[417] LCOT Flash/Recall Time.........................................................................................................................27[418] LCOT Disconnect Time...........................................................................................................................27[450] DIL 1:1 Destination .................................................................................................................................27[451] DID Number (KX-TDA100/KX-TDA200/KX-TDA600 only) ......................................................................27[452] DID Name (KX-TDA100/KX-TDA200/KX-TDA600 only) .........................................................................27[453] DID Destination (KX-TDA100/KX-TDA200/KX-TDA600 only).................................................................27[471] Host PBX Access Code ..........................................................................................................................28[472] Extension-to-CO Line Call Duration ........................................................................................................28[473] CO-to-CO Line Call Duration ..................................................................................................................28[475] DISA Silence Detection...........................................................................................................................28[476] DISA Continuous Signal Detection .........................................................................................................28[477] DISA Cyclic Signal Detection..................................................................................................................28[490] Caller ID Signal Type ..............................................................................................................................29
2.1.8 COS Programming........................................................................................................... 29[500] Trunk Group Number ..............................................................................................................................29[501] TRS Level ...............................................................................................................................................29[502] CO Line Call Duration Limitation.............................................................................................................29[503] Call Transfer to CO Line..........................................................................................................................29[504] Call Forwarding to CO Line.....................................................................................................................30[505] Executive Busy Override.........................................................................................................................30[506] Executive Busy Override Deny................................................................................................................30[507] DND Override .........................................................................................................................................30[508] Account Code Mode ...............................................................................................................................30[509] TRS Level for System Speed Dialing ......................................................................................................30[510] TRS Level for Extension Dial Lock..........................................................................................................30[511] Manager Assignment ..............................................................................................................................31[512] Permission for Door Open Access ..........................................................................................................31[514] Time Service Manual Switching..............................................................................................................31[515] Wireless XDP Parallel Mode for Paired Telephone .................................................................................31[516] Programming Mode Limitation ................................................................................................................31
2.1.9 Extension Programming................................................................................................... 31[600] EXtra Device Port (XDP) Mode...............................................................................................................31[601] Terminal Device Assignment...................................................................................................................32[602] Class of Service ......................................................................................................................................32[603] Extension User Group.............................................................................................................................32[604] Extension Intercept Destination ..............................................................................................................32[605] Call Forwarding—No Answer Time .........................................................................................................32[606] CLIP Number ..........................................................................................................................................33[620] Incoming Call Distribution Group Member ..............................................................................................33[621] Incoming Call Distribution Group Delayed Ringing .................................................................................33[622] Incoming Call Distribution Group Floating Extension Number................................................................33
PT Programming Manual 5
[623] Incoming Call Distribution Group Name ................................................................................................. 33[624] Incoming Call Distribution Group Distribution Method............................................................................ 34[625] Destination for Overflow Time Expiration ............................................................................................... 34[626] Overflow Time ........................................................................................................................................ 34[627] Destination When All Busy ..................................................................................................................... 34[628] Queuing Call Capacity............................................................................................................................ 34[629] Queuing Hurry-up Level ......................................................................................................................... 35[630] Queuing Time Table ............................................................................................................................... 35[631] Sequences in Queuing Time Table......................................................................................................... 35[632] Maximum Number of Agents .................................................................................................................. 35[640] Extension User Groups of a Paging Group ............................................................................................ 35[641] External Pagers of a Paging Group ........................................................................................................ 36[650] Extension User Groups of a Pickup Group............................................................................................. 36[660] VM Group Floating Extension Number................................................................................................... 36[680] Idle Extension Hunting Type ................................................................................................................... 36[681] Idle Extension Hunting Group Member .................................................................................................. 37[690] PS Registration....................................................................................................................................... 37[691] PS Termination ....................................................................................................................................... 37[692] Personal Identification Number (PIN) for PS Registration ...................................................................... 38[699] CS Status Reference.............................................................................................................................. 38
2.1.10 Resource/Interface Programming ....................................................................................38[700] External Pager Floating Extension Number ........................................................................................... 38[710] Music Source Selection for BGM (with the KX-TDA50)/BGM2 (with the KX-TDA100/KX-TDA200/KX-TDA600) .......................................................................................................................................................... 38[711] Music on Hold......................................................................................................................................... 38[712] Music for Transfer ................................................................................................................................... 39[720] Doorphone Call Destination ................................................................................................................... 39[729] Doorphone Number Reference .............................................................................................................. 39[730] Outgoing Message (OGM) Floating Extension Number ......................................................................... 39[731] Outgoing Message (OGM) Name........................................................................................................... 40[732] DISA Security Mode ............................................................................................................................... 40
2.1.11 SMDR & Maintenance Programming ...............................................................................40[800] RS-232C Parameter—New Line Code ................................................................................................... 40[800] RS-232C Parameter—Baud Rate........................................................................................................... 40[800] RS-232C Parameter—Word Length ....................................................................................................... 40[800] RS-232C Parameter—Parity Bit ............................................................................................................. 40[800] RS-232C Parameter—Stop Bit Length ................................................................................................... 40[801] External Modem Control......................................................................................................................... 41[802] SMDR Page Length................................................................................................................................ 41[803] SMDR Skip Perforation........................................................................................................................... 41[804] SMDR Outgoing Call Printing................................................................................................................. 41[805] SMDR Incoming Call Printing................................................................................................................. 41[810] Remote Programming ............................................................................................................................ 41[811] Modem Floating Extension Number ....................................................................................................... 41[812] ISDN Remote Floating Extension Number (KX-TDA100/KX-TDA200/KX-TDA600 only)....................... 42
2.1.12 Card Programming...........................................................................................................42[900] Slot Card Type Reference ...................................................................................................................... 42[901] Slot Card Deletion .................................................................................................................................. 42[902] Slot Card Reset ...................................................................................................................................... 42[910] OPB3 Option Card Type Reference (KX-TDA100/KX-TDA200/KX-TDA600 only) ................................. 42[911] OPB3 Option Card Deletion (KX-TDA100/KX-TDA200/KX-TDA600 only) ............................................. 43
3 Appendix ............................................................................................... 453.1 Revision History.............................................................................................................463.1.1 KX-TDA100/KX-TDA200 PMPR Software File Version 3.2xxx ........................................463.1.2 KX-TDA50 PSMPR Software File Version 4.0xxx ............................................................463.2 Feature Programming References ...............................................................................47
6 PT Programming Manual
Section 1
Overview
This section provides an overview of programming the PBX.
PT Programming Manual 7
1.1 Introduction
1.1 Introduction
1.1.1 Introduction
These programming instructions are designed to serve as an overall system programming reference for the Panasonic Hybrid IP-PBX. Each feature in the PBX has default settings that can be changed to customize the PBX to your requirements. These settings control the functions of the PBX, and changing them is referred to as "system programming".Only one person can perform system programming at a time. Any other users trying to enter system programming mode will be denied access.
Ways to ProgramThere are two programming methods:
• PC (Personal Computer) ProgrammingAll features and settings of the PBX can be programmed through PC programming with Maintenance Console. Installing and starting Maintenance Console are explained in the Installation Manual.
• PT (Proprietary Telephone) ProgrammingA subset of the features and settings of the PBX can be programmed using a PT. PT programming is described in Section 2.1 PT Programming. An extension user can perform system programming by entering three-digit programming numbers with a PT.
1.1.2 Password Security
To maintain system security, system passwords are required to access certain programming functions of the PBX. By giving different users access to different passwords, it is possible to control the amount of programming that each user is able to perform.The following types of system passwords are available:
Warning to the Administrator or Installer regarding the system password
1. Please provide all system passwords to the customer.
2. To avoid unauthorized access and possible abuse of the PBX, keep the passwords secret, and inform the customer of the importance of the passwords, and the possible dangers if they become known to others.
3. The PBX has default passwords preset. For security, change these passwords the first time that you program the PBX.
4. Change the passwords periodically.
Password Description Format
System Password (PT) for User
Used to access user-level PT programming. The specific PT programming items that may be programmed at user level can be selected through system programming.
4 – 10 digits
System Password (PT) for Administrator
Used to access administrator-level PT programming. All PT programming settings are available.
8 PT Programming Manual
1.1 Introduction
5. It is strongly recommended that passwords of 10 numbers or characters be used for maximum protection against unauthorized access. For a list of numbers and characters that can be used in system passwords, refer to Section 1.1.3 Entering Characters.
6. If a system password is forgotten, it can be found by loading a backup of the system data into a PC, and checking the password using the Maintenance Console software. If you do not have a backup of the system data, you must reset the PBX to its factory defaults and reprogram it. Therefore, we strongly recommend maintaining a backup of the system data. For more information on how to back up the system data, refer to the on-line help of the Maintenance Console.However, as system passwords can be extracted from backup copies of the system data file, do not allow unauthorized access to these files.
1.1.3 Entering Characters
The following characters can be used when storing a name, message, or other text entry data using a PT. The tables below show you the characters available by pushing each button a specific number of times.
Table 1 (Standard mode)
PT Programming Manual 9
1.1 Introduction
Table 2 (Option mode)
[Example of Entering Characters]
To enter "Ann":
Notes• To erase the character on the cursor, press CLEAR.
• To move the cursor to the left, press .
• To move the cursor to the right, press . When entering two or more characters that use the same button consecutively (e.g. "G" and "I"), you must press this button or the FWD/DND button after entering the first character.
• If SELECT is pressed, the characters for each button will be displayed in reverse order.
• To toggle between Table 1 and Table 2 when using the KX-T7600 series or an IP-PT, press the leftmost soft button.
A n n
6 (5 times) 6 (5 times)2FWD/DND
OR
10 PT Programming Manual
Section 2
PT Programming
This section serves as reference operating instructions when using a display PT to program the PBX.
PT Programming Manual 11
2.1 PT Programming
2.1 PT Programming
2.1.1 Programming Instructions
Required Telephone/ExtensionPBX settings can be customized through system programming by using a proprietary telephone (PT) with a multiline display, such as the KX-T7636. To access system programming, the Class of Service (COS) assigned to the PT's extension must be programmed to allow system programming, or the PT must be connected to the lowest-numbered port on the card installed in the lowest-numbered slot.
Only one system programming session can be performed at a time. This means that only one user can access system programming at a time, whether through a PT or PC.
For a list of characters that can be entered during system programming, see Section 1.1.3 Entering Characters.
Buttons and Functions
Fixed ButtonsFunction
T7600/IP-PT*1 T7200/T7400*2
PREVIOUS
NEXT
(Page up)
(Page down)
ENTER
—Back to Previous Menu
(CANCEL)
SHIFT
PROGRAM
END
REDIAL
SP-PHONE
FWD/DND
CONF
AUTO DIAL
STORE
SHIFT SHIFT
PAUSE
PROGRAM PAUSE
HOLD HOLD
12 PT Programming Manual
2.1 PT Programming
Entering System Programming ModeUsing a PT to perform system programming allows an authorized extension user to set a wide range of PBX features and parameters.There are two levels of system programming that can be performed with a PT: administrator-level programming and user-level programming.
Administrator Level:Allows the programming of all settings accessible through PT programming.
User Level:Allows the programming of limited settings as permitted through PC programming.
Note
means default value throughout this manual.
Programming Structure
SELECT
FLASH
CLEAR
SECRET
*1: The buttons shown in this column are from the KX-T7600 series.
*2: The buttons shown in this column are from the KX-T7400 series.
Programming Number
Programming Group Title Description
[0XX] Basic Programming Frequently used programming steps
Fixed ButtonsFunction
T7600/IP-PT*1 T7200/T7400*2
AUTO ANS
MUTE
MESSAGE
MUTE
AUTO ANSWER MESSAGE
FLASH/RECALL FLASH
TRANSFER
TRANSFER
INTERCOM
INTERCOM
PROGRAM/ PAUSE
#
= 1234
System Password for AdministratorProgramming No.
3 digits —for PT Programming
= 1234
Programming No.
3 digits
System Password for User—for PT Programming
PROGRAM/ PAUSE
PT Programming Manual 13
2.1 PT Programming
2.1.2 Maximum Values
Throughout this manual, maximum entry values are shown for each programming item. When maximum entry values for one or more of the supported PBX models differ, these differences are listed within the programming item, as shown in the example below.
However, please note that extension number, slot and port entry values are not listed within each programming item. These values vary depending on the model of PBX and the card type installed, as shown below.
Extension NumbersAll models: 1–5 digits
Feature NumbersAll models: 1–4 digits
[1XX]System Management
ProgrammingGlobal system parameters
[2XX] Timer Programming System timers
[3XX]TRS/ARS Programming TRS and Automatic Route Selection
(ARS) programming
[4XX] CO Line Programming CO line and trunk group settings
[5XX] COS Programming Class of Service parameters
[6XX] Extension Programming Extension feature settings
[7XX]Resource/Interface
ProgrammingPBX interface and external device settings
[8XX]SMDR & Maintenance
ProgrammingStation Message Detail Recording (SMDR) and maintenance feature settings
[9XX]
Card Programming Used to display the cards currently installed in the PBX, or to "delete" a card from system programming before physically removing it.
Programming Number
Programming Group Title Description
These values vary by PBX model
[351] Carrier Table No. Trunk Group No.END
ENTER ENTERKX-TDA50: 01–10KX-TDA100: 01–10KX-TDA200: 01–10KX-TDA600: 01–48
KX-TDA50: 01–64KX-TDA100: 01–64KX-TDA200: 01–64KX-TDA600: 01–96
Disable/ Enable
SELECT
14 PT Programming Manual
2.1 PT Programming
KX-TDA50 Slot and Port Values
Available Slot Entry Values
Enter slot numbers as two-digit numbers (e.g. "04" for slot 4).
Available Port Entry Values
Enter values as two-digit numbers (e.g. "04" for port 4).
KX-TDA100/KX-TDA200/KX-TDA600 Slot and Port Values
Available Slot Entry ValuesKX-TDA100/KX-TDA200
Enter slot numbers as two-digit numbers (e.g. "04" for slot 4).
Slot Number Supported Cards
01 Pre-installed Super Hybrid Ports
02–04 DLC4, HLC4, PLC4, LCOT4 cards
05–07 DLC8, PLC8, SLC8 cards
08–09 DPH4 cards
Card Type Port Number Related Programming
DLC4 01–04
[600] [601]
HLC4 01–04
PLC4 01–04
DLC8 01–08
PLC8 01–08
DPH4 01–04 [72x]
LCOT4 01–04 [40x] [41x] [450]
Pre-installed Super Hybrid Ports 01–04 [600] [601]
PBX Model Slot Number Supported Cards
KX-TDA100 01–06All cards
KX-TDA200 01–11
PT Programming Manual 15
2.1 PT Programming
KX-TDA600
Enter slot numbers as three-digit numbers of the form "XYY":
• X: Shelf number (1-4)
• YY: Slot number (01-11)
Available Port Entry Values
Enter values as two-digit numbers (e.g. "04" for port 4).
2.1.3 Basic Programming
[000] Date & Time
Slot Number Supported Cards
101–110
All cards201–211301–311401–411
Card Type Port Number Related Programming
DHLC8 01–08
[600] [601]DLC8 01–08
DLC16 01–16
DPH4 11–34* [72x]
LCOT8 (KX-TDA100/KX-TDA200 only)
01–08 [400] [409] [41x] [450]
LCOT16 (KX-TDA100/KX-TDA200 only)
01–16
ELCOT16 (KX-TDA600 only) 01–16
*: Enter card number and port number as single-digit numbers (e.g. "34" for card 3, port 4).
[000]00–99
Year01–31
Date
01–12
Hour00–59
MinuteEND
(HOLD)
ENTER ENTER
ENTER
01–12
Month
NEXT AM/PM
SELECT(AUTO ANS/MESSAGE)
16 PT Programming Manual
2.1 PT Programming
[001] System Speed Dialing Number
[002] System Speed Dialing Name
[003] Extension Number
Notes
• Extensions that will have a mailbox using a VM in DPT integration must have extension numbers of 2–4 digits.
• Extension numbers of PSs can be a maximum of 4 digits.
• If PC Phone, PC Console, or a CTI application is running on a PC connected to an extension whose extension number is to be programmed/modified, quit the application first.
[004] Extension Name
[005] Extension Personal Identification Number (PIN)
WARNING
There is a risk that fraudulent telephone calls will be made if a third party discovers a personal identification number (PIN) (verification code PIN or extension PIN) of the PBX.
[001]000–999
Speed Dialing No. Telephone No.
Max. 32 digits ENDENTER ENTER
CANCELNEXT
To the Next Speed Dialing No.To the Desired Speed Dialing No.
[002] NameMax. 20 characters END
ENTER ENTER000–999
Speed Dialing No.
[003] New Extn. No.END
Current Extn. No.
ENTER ENTER101–
[004] NameMax. 20 characters END
Extn. No.
ENTER ENTER
[005]ENDMax. 10 digits
PIN
ENTER ENTER
Extn. No.
PT Programming Manual 17
2.1 PT Programming
The cost of such calls will be billed to the owner/renter of the PBX.To protect the PBX from this kind of fraudulent use, we strongly recommend:a) Keeping PINs secret.
b) Selecting complex, random PINs that cannot be easily guessed.
c) Changing PINs frequently.
[006] Operator Assignment
[007] DSS Console Paired Telephone
Note
This program is only available after the port connected to the DSS Console is assigned as "DSS Console" in [601] Terminal Device Assignment.If one or more SDN buttons have been set at the DSS Console, they must be deleted before this setting can be changed (KX-TDA100/KX-TDA200/KX-TDA600 only).
[008] Absent Message
For default values, see "1.1.1 Absent Message" in the Feature Manual.
2.1.4 System Management Programming
[100] Flexible Numbering
[006]END
Extn. No.
ENTER ENTER1 Day/2 Lunch/3 Break/4 Night
Time No.101–
[007]KX-TDA50: 01–04KX-TDA100: 01–08KX-TDA200: 01–08KX-TDA600: 01–64
DSS Console No.END
ENTER ENTER
Extn. No.
[008]1–8
Location No.END
Message
ENTER ENTERMax. 16 characters
[100]01–68
Location No. Feature No.END
(HOLD)ENTER ENTER
CANCELNEXT
To the Next Location No.To the Desired Location No.
18 PT Programming Manual
2.1 PT Programming
For default values, see "1.6.4 Flexible Numbering/Fixed Numbering" in the Feature Manual.
[101] Time Service Switching Mode
[102] Time Service Starting Time
[103] Idle Line Access (Local Access)
[110] System Password for Administrator—for PT Programming
[111] System Password for User—for PT Programming
[101]Manual/Automatic
ENDSELECT
(AUTO ANS/MESSAGE)ENTER ENTER
[102]
01:00–12:59
Hour:MinuteEND
ENTER
ENTER
Day No. Time No.0 Sun/1 Mon/2 Tue/3 Wed/4 Thu/5 Fri/6 Sat
1 Day-1/2 Lunch/3 Day-2/4 Night
Page upNEXT
To the Next Time No.
To the Next Day No.
AM/PMSELECT
[103] Location No. Trunk Group No.END
ENTER ENTERKX-TDA50: 01–64KX-TDA100: 01–64KX-TDA200: 01–64KX-TDA600: 01–96
KX-TDA50: 01–64KX-TDA100: 01–64KX-TDA200: 01–64KX-TDA600: 01–96
Location No.=Trunk Group No.
[110]4–10 digits
PasswordEND
ENTER ENTER1234
[111]4–10 digits
PasswordEND
ENTER ENTER1234
PT Programming Manual 19
2.1 PT Programming
[112] Manager Password
[120] Verification Code
[121] Verification Code Name
[122] Verification Code Personal Identification Number (PIN)
WARNING
There is a risk that fraudulent telephone calls will be made if a third party discovers a personal identification number (PIN) (verification code PIN or extension PIN) of the PBX.The cost of such calls will be billed to the owner/renter of the PBX.To protect the PBX from this kind of fraudulent use, we strongly recommend:a) Keeping PINs secret.
b) Selecting complex, random PINs that cannot be easily guessed.
c) Changing PINs frequently.
[123] Verification Code COS Number
[112]4–10 digits
PasswordEND
ENTER ENTER1234
[120]0001–1000
Location No.1–4 digits
Verification CodeEND
ENTER ENTER
[121]0001–1000
Location No.Max. 20 characters
NameEND
ENTER ENTER
[122]0001–1000
Location No.Max. 10 digits
PINEND
ENTER ENTER
[123]0001–1000
Location No.01–64
01
COS No.END
ENTER ENTER
20 PT Programming Manual
2.1 PT Programming
[190] Main Processing (MPR) Software Version Reference
2.1.5 Timer Programming
[200] Hold Recall Time
[201] Transfer Recall Time
[203] Intercept Time
[204] Hot Line Waiting Time
[205] Automatic Redial Repeat Times (KX-TDA100/KX-TDA200/KX-TDA600 only)
[207] Door Unlock Time
[190]Reference only
MPR VersionEND
ENTER
[200]0–240 s
60 s
TimeEND
(HOLD)ENTER ENTER
[201]END
ENTER ENTER1–240 s
Time
60 s
[203]END
ENTER ENTER1–240 s
Time
40 s1 Day/2 Lunch3 Break/4 Night
Time No.Time No.
[204]0–15 s
TimeEND
ENTER ENTER1 s
[205]0–10
0
Number of TimesEND
ENTER ENTER
[207]2–7 s
5 s
TimeEND
ENTER ENTER
PT Programming Manual 21
2.1 PT Programming
[208] Call Duration Count Starting Time for LCOT
[209] DISA Delayed Answer Time
[210] DISA CO-to-CO Line Call Prolong Time
[211] DISA Intercept Time
2.1.6 TRS/ARS Programming
[300] TRS Override by System Speed Dialing
[301] TRS Denied Code
[208]0–60 s
0 s
TimeEND
ENTER ENTER
[209]0–30 s
5 s
TimeEND
ENTER ENTER
[210]0–7 min
TimeEND
ENTER ENTER3 min
[211]0–60 s
TimeEND
ENTER ENTER40 s1 Day/2 Lunch3 Break/4 Night
Time No.Time No.
[300]Disable/ Enable
END(HOLD)
SELECT(AUTO ANS/MESSAGE)
ENTER ENTER
ENTER ENTER
[301]2–6
Level No.Max. 16 digits
Denied Code001–100
Location No.END
CANCELNEXT
To the Next Location No.To the Desired Location No.
22 PT Programming Manual
2.1 PT Programming
[302] TRS Exception Code
[303] Special Carrier Access Code
[304] Emergency Number
[320] ARS Mode
[321] ARS Leading Number
[322] ARS Routing Plan Table Number
[325] ARS Exception Number
[302]2–6
Level No.Max. 16 digits
Exception Code001–100
Location No.END
ENTER ENTER
[303]Max. 16 digits
Carrier Access CodeKX-TDA50: 01–20KX-TDA100: 01–20KX-TDA200: 01–20KX-TDA600: 001–100
Location No.END
ENTER ENTER
[304]Max. 32 digits
Emergency No.01–10
Location No.END
ENTER ENTER
[320] Off/Idle Line/ All Access
ENDSELECT
ENTER ENTER
[321]0001–1000
Location No.Max. 16 digits
Leading No.END
ENTER ENTER
[322]0001–1000
Location No.KX-TDA50: 01–16KX-TDA100: 01–16KX-TDA200: 01–16KX-TDA600: 01–48
Plan Table No.END
ENTER ENTER
01
[325]001–200
Location No.Max. 16 digits
Exception No.END
ENTER ENTER
PT Programming Manual 23
2.1 PT Programming
[330] ARS Routing Plan Time Table
[331–346] ARS Routing Plan Table (1–16) (KX-TDA50/KX-TDA100/KX-TDA200 only)
[347] ARS Routing Plan Table (1–48) (KX-TDA600 only)
[350] ARS Carrier Name
[351] ARS Trunk Group for Carrier Access
KX-TDA50: 01–16KX-TDA100: 01–16KX-TDA200: 01–16KX-TDA600: 01–48
Plan Table No.
01–12/00–59
Hour:Minute
0 Sun/1 Mon/2 Tue/3 Wed/4 Thu/5 Fri/6 Sat
Day No.
END
1 TimeA/2 TimeB/3 TimeC/4 TimeD
ARS Time No.
ENTER
ENTER
[330]
AM/PMSELECT
[331–346] Day No.
KX-TDA50: 1–10/ NoneKX-TDA100: 1–10/ NoneKX-TDA200: 1–10/ None
Carrier Table No.
1 TimeA/2 TimeB/3 TimeC/4 TimeD
ARS Time No.
END
1–6
Priority
ENTER
ENTER
0 Sun/1 Mon/2 Tue/3 Wed/4 Thu/5 Fri/6 Sat
01–48
Plan Table No.
END
1 TimeA/2 TimeB/3 TimeC/4 TimeD
ARS Time No.
ENTER
ENTER
[347]1–6
Priority
1–48/ None
Carrier Table No.
[350]KX-TDA50: 01–10KX-TDA100: 01–10KX-TDA200: 01–10KX-TDA600: 01–48
Carrier Table No.Max. 20 characters
NameEND
ENTER ENTER
Disable/ Enable
SELECT[351] Carrier Table No. Trunk Group No.END
ENTER ENTER
SELECT
KX-TDA50: 01–10KX-TDA100: 01–10KX-TDA200: 01–10KX-TDA600: 01–48
KX-TDA50: 01–64KX-TDA100: 01–64KX-TDA200: 01–64KX-TDA600: 01–96
24 PT Programming Manual
2.1 PT Programming
[352] ARS Removed Number of Digits for Carrier Access
[353] ARS Carrier Access Code
2.1.7 CO Line Programming
[400] LCOT CO Line Connection
[401] LCOT CO Line Name
[402] LCOT Trunk Group Number
[352] Carrier Table No.0–15
Digits to RemoveEND
ENTER ENTERKX-TDA50: 01–10KX-TDA100: 01–10KX-TDA200: 01–10KX-TDA600: 01–48
0
[353] Carrier Table No.Max. 32 digits
Carrier Access CodeEND
ENTER ENTERKX-TDA50: 01–10KX-TDA100: 01–10KX-TDA200: 01–10KX-TDA600: 01–48
ENTER ENTER
[400]No Connect/ Connect
END(HOLD)
SELECT(AUTO ANS/MESSAGE)
CANCELNEXT
To the Next Port No.To the Desired Port No.
Slot No. Port No.
[401]Max. 20 characters
NameEND
ENTER ENTER3 digits
CO Line No.
[402]KX-TDA50: 01–64KX-TDA100: 01–64KX-TDA200: 01–64KX-TDA600: 01–96
3 digits
Trunk Group No.END
ENTERENTER
CO Line No.
01
PT Programming Manual 25
2.1 PT Programming
[409] LCOT CO Line Number Reference
[410] LCOT Dialing Mode
[411] LCOT Pulse Rate
[412] LCOT DTMF Minimum Duration
[413] LCOT CPC Signal Detection Time—Outgoing
[414] LCOT CPC Signal Detection Time—Incoming
[416] LCOT Pause Time
[409]Reference only
Slot No. Port No. CO Line No.END
ENTER
[410]DTMF/Pulse END
SELECT
ENTER ENTER
Slot No. Port No.
[411]Low/High ENDSELECT
ENTER ENTER
Slot No. Port No.
[412]80/160 ms ENDSELECT
ENTER ENTER
Slot No. Port No.
[413]0: None/1: 6.5/2–113: (N–1)×8 ms
ENDENTER ENTER
Slot No. Port No. Mode No.
051 (400 ms)
[414]END
ENTER ENTER0: None/1: 6.5/2–113: (N–1)×8 ms
Slot No. Port No. Mode No.
051 (400 ms)
[416] 1.5/2.5/ 3.5/4.5 s
ENDSELECT
ENTER ENTER
Slot No. Port No.
26 PT Programming Manual
2.1 PT Programming
[417] LCOT Flash/Recall Time
[418] LCOT Disconnect Time
[450] DIL 1:1 Destination
[451] DID Number (KX-TDA100/KX-TDA200/KX-TDA600 only)
[452] DID Name (KX-TDA100/KX-TDA200/KX-TDA600 only)
[453] DID Destination (KX-TDA100/KX-TDA200/KX-TDA600 only)
[417]None/80/96/112/300/ 600/900/1200 ms/option
ENDSELECT
ENTER ENTER
Slot No. Port No.
[418]0.5/ 1.5/2.0/4.0/12.0 s
ENDSELECT
ENTER ENTER
Slot No. Port No.
[450]
END
ENTER
ENTER
Time No. Slot No. Port No. Destination No.1 Day/2 Lunch/3 Break/4 Night
1–5 digits
[451]0001–1000
Location No.Max. 32 digits
DID No.END
ENTER ENTER
[452]0001–1000
Location No.Max. 20 characters
NameEND
ENTER ENTER
[453]0001–1000
Location No. Destination No.END
ENTER ENTER1 Day/2 Lunch/3 Break/4 Night
Time No.1–5 digits
PT Programming Manual 27
2.1 PT Programming
[471] Host PBX Access Code
[472] Extension-to-CO Line Call Duration
[473] CO-to-CO Line Call Duration
[475] DISA Silence Detection
[476] DISA Continuous Signal Detection
[477] DISA Cyclic Signal Detection
[471] Trunk Group No.01–10
Location No.
Max.10 digits
Host PBX Access CodeEND
ENTER
ENTER
KX-TDA50: 01–64KX-TDA100: 01–64KX-TDA200: 01–64KX-TDA600: 01–96
[472] Trunk Group No.01–60 min
TimeEND
ENTER ENTERKX-TDA50: 01–64KX-TDA100: 01–64KX-TDA200: 01–64KX-TDA600: 01–96
10 min
[473] Trunk Group No.01–60 min
TimeEND
ENTER ENTERKX-TDA50: 01–64KX-TDA100: 01–64KX-TDA200: 01–64KX-TDA600: 01–96
10 min
ENTER ENTER
[475] Trunk Group No.No Detect/Detect
ENDSELECT
KX-TDA50: 01–64KX-TDA100: 01–64KX-TDA200: 01–64KX-TDA600: 01–96
[476] Trunk Group No.No Detect/ Detect
ENDSELECT
ENTER ENTERKX-TDA50: 01–64KX-TDA100: 01–64KX-TDA200: 01–64KX-TDA600: 01–96
[477] Trunk Group No.No Detect/ Detect
ENDSELECT
ENTER ENTERKX-TDA50: 01–64KX-TDA100: 01–64KX-TDA200: 01–64KX-TDA600: 01–96
28 PT Programming Manual
2.1 PT Programming
[490] Caller ID Signal Type
2.1.8 COS Programming
[500] Trunk Group Number
[501] TRS Level
[502] CO Line Call Duration Limitation
[503] Call Transfer to CO Line
ENTER ENTER
[490] Slot No. FSK/FSK with Visual Caller ID/DTMF
SELECTEND
[500]1 Day/2 Lunch/3 Break/4 Night
01–64
COS No.Time No.
Trunk Group No.
Disable/ EnableEND
(HOLD)
SELECT(AUTO ANS/MESSAGE)
ENTER
ENTER
NEXT
To the Next Trunk Group No.
To the Next COS No.
Page up
KX-TDA50: 01–64KX-TDA100: 01–64KX-TDA200: 01–64KX-TDA600: 01–96
[501]01–64
COS No.Time No.1–7
LevelEND
ENTER ENTER1 Day/2 Lunch/3 Break/4 Night 1
[502]01–64
COS No.END Disable/
Enable
SELECT
ENTER ENTER
[503]01–64
COS No.END Disable/
Enable
SELECT
ENTER ENTER
PT Programming Manual 29
2.1 PT Programming
[504] Call Forwarding to CO Line
[505] Executive Busy Override
[506] Executive Busy Override Deny
[507] DND Override
[508] Account Code Mode
[509] TRS Level for System Speed Dialing
[510] TRS Level for Extension Dial Lock
[504]01–64
COS No.END Disable/
Enable
SELECT
ENTER ENTER
[505]01–64
COS No.END Disable/
Enable
SELECT
ENTER ENTER
[506]01–64
COS No.END Disable/
Enable
SELECT
ENTER ENTER
[507]01–64
COS No.END Disable/
Enable
SELECT
ENTER ENTER
[508]01–64
COS No.END Option/
Forced
SELECT
ENTER ENTER
[509]01–64
COS No.1–7
TRS LevelEND
ENTER ENTER1
[510]01–64
COS No.1–7 END
ENTER ENTER7
TRS Level
30 PT Programming Manual
2.1 PT Programming
[511] Manager Assignment
[512] Permission for Door Open Access
[514] Time Service Manual Switching
[515] Wireless XDP Parallel Mode for Paired Telephone
[516] Programming Mode Limitation
2.1.9 Extension Programming
[600] EXtra Device Port (XDP) Mode
[511]01–64
COS No.END Disable/Enable
SELECT
ENTER ENTER* Only COS No. 64 is set to Enable.
Disable/ Enable
SELECT[512]01–64
COS No.END
ENTER ENTER
[514]01–64
COS No.END Disable/
Enable
SELECT
ENTER ENTER
SELECT Disable/ Enable
[515]01–64
COS No.END
ENTER ENTER
[516]01–64
COS No.END
SELECT
ENTER ENTER Disable/ Personal/ System&Personal
[600] Slot No. Port No.
Off/OnEND
(HOLD)
SELECT(AUTO ANS/MESSAGE)
ENTER ENTER
CANCELNEXT
To the Next Port No.To the Desired Port No.
PT Programming Manual 31
2.1 PT Programming
[601] Terminal Device Assignment
NoteWhen changing the type of a port for which one or more SDN buttons are set (except when changing between PC Console and Telephone), all SDN buttons customized for that device will be deleted (KX-TDA100/KX-TDA200/KX-TDA600 only).
[602] Class of Service
[603] Extension User Group
[604] Extension Intercept Destination
[605] Call Forwarding—No Answer Time
[601] Slot No. Port No.
KX-TDA100/KX-TDA200:Telephone/DSS Console 01–08/Voice Mail 1–(01–12)/Voice Mail 2–(01–12)/PC Console 1–8
ENDSELECT
ENTER ENTER
KX-TDA50:Telephone/DSS Console 01–04/Voice Mail 1–(01–04)/PC Console 1–2
KX-TDA600:Telephone/DSS Console 01–64/Voice Mail (1–8)–(01–12)/PC Console 1–8
See below
[602]01–64
01
COS No.END
ENTER ENTER
Extn. No.
[603] Extn. User Group No.END
ENTER ENTER
Extn. No.KX-TDA50: 001–032KX-TDA100: 001–032KX-TDA200: 001–032KX-TDA600: 001–096
001
[604]Max. 32 digits
Destination No.1 Day/2 Lunch/3 Break/4 Night
ENDENTER ENTER
Time No. Extn. No.
[605]0–120 s
TimeEND
ENTER ENTER15 s
Extn. No.
32 PT Programming Manual
2.1 PT Programming
[606] CLIP Number
[620] Incoming Call Distribution Group Member
[621] Incoming Call Distribution Group Delayed Ringing
[622] Incoming Call Distribution Group Floating Extension Number
[623] Incoming Call Distribution Group Name
[606]Max. 16 digits
CLIP No.END
ENTER ENTER
Extn. No.
[620] Location No.Incoming Call Distribution Group No.
END
ENTER
ENTER
Extn. No.
001–128
KX-TDA50: 01–32KX-TDA100: 01–32KX-TDA200: 01–32KX-TDA600: 001–128
[621] Location No.
END
Immediate/ 1–6 (rings)/ No ring
SELECT
ENTER
ENTER
Incoming Call Distribution Group No.
001–128
KX-TDA50: 01–32KX-TDA100: 01–32KX-TDA200: 01–32KX-TDA600: 001–128
[622]END
ENTER ENTER
Extn. No.Incoming Call Distribution Group No.
001–128
[623]Max. 20 characters
NameEND
ENTER ENTER
Incoming Call Distribution Group No.
001–128
PT Programming Manual 33
2.1 PT Programming
[624] Incoming Call Distribution Group Distribution Method
[625] Destination for Overflow Time Expiration
[626] Overflow Time
[627] Destination When All Busy
[628] Queuing Call Capacity
[624]END Ring/UCD/
Priority Hunt
SELECT
ENTER ENTER
Incoming Call Distribution Group No.
001–128
[625]1 Day/2 Lunch/3 Break/4 Night
Max. 32 digits
Destination No.
END
ENTER
ENTER
Time No.Incoming Call Distribution Group No.
001–128
[626] Overflow TimeEND
ENTER ENTER
Incoming Call Distribution Group No.
001–128
( None/1–125)×10 s
[627]Max. 32 digits
Destination No.
END
ENTER
ENTER
Incoming Call Distribution Group No.
1 Day/2 Lunch/3 Break/4 Night
Time No.
001–128
[628]0–30
Number in QueuingEND
ENTER ENTER
Incoming Call Distribution Group No.
001–128
30
34 PT Programming Manual
2.1 PT Programming
[629] Queuing Hurry-up Level
[630] Queuing Time Table
[631] Sequences in Queuing Time Table
[632] Maximum Number of Agents
[640] Extension User Groups of a Paging Group
[629]None/1–30
Hurry-up LevelEND
ENTER ENTER
Incoming Call Distribution Group No.
001–128
[630]1 Day/2 Lunch/3 Break/4 Night
Table No.Time No.
END
ENTER
ENTER
Incoming Call Distribution Group No.
001–128
KX-TDA50: None/01–64KX-TDA100: None/01–64KX-TDA200: None/01–64KX-TDA600: None/001–128
[631]01–16
* A number must be entered in place of the "N".
Location No.Table No.
END
None/Overflow/Disconnect/"N" × 5 s/Sequence "N"/OGM "N"
SELECT
ENTER
ENTER
KX-TDA50: 01–64KX-TDA100: 01–64KX-TDA200: 01–64KX-TDA600: 001–128
[632]No Limitation/01–32
Number of AgentsEND
ENTER ENTER
Incoming Call Distribution Group No.
001–128
[640] Extn. User Group No.Paging Group No.
ENDNo/YesSELECT
ENTER
ENTER
KX-TDA50: 01–32KX-TDA100: 01–32KX-TDA200: 01–32KX-TDA600: 01–96
KX-TDA50: 001–032KX-TDA100: 001–032KX-TDA200: 001–032KX-TDA600: 001–096
KX-TDA50/KX-TDA100/KX-TDA200: Paging Group No. 01–31=Extn. User Group No. 001–031,Paging Group No. 32=All extension user groupsKX-TDA600: Paging Group No.= Extn. User Group No.
PT Programming Manual 35
2.1 PT Programming
[641] External Pagers of a Paging Group
[650] Extension User Groups of a Pickup Group
[660] VM Group Floating Extension Number
[680] Idle Extension Hunting Type
[641] External Pager No.Paging Group No.
END
SELECT
ENTER
ENTER
No/ YesKX-TDA50: 01–32KX-TDA100: 01–32KX-TDA200: 01–32KX-TDA600: 01–96
KX-TDA50: 1KX-TDA100: 1–2KX-TDA200: 1–2KX-TDA600: 1–2
[650] Pickup Group No.
ENDSELECT
ENTER
ENTERNo/Yes
Extn. User Group No.
KX-TDA50/100/200: Pickup Group No. 01–32=Extn. User Group No. 001–032,Pickup Group No. 33–64=All extension user groupsKX-TDA600: Pickup Group No.=Extn. User Group No.
KX-TDA50: 01–64KX-TDA100: 01–64KX-TDA200: 01–64KX-TDA600: 01–96
KX-TDA50: 001–032KX-TDA100: 001–032KX-TDA200: 001–032KX-TDA600: 001–096
[660]KX-TDA50: 1KX-TDA100: 1–2KX-TDA200: 1–2KX-TDA600: 1–8
VM (DPT) Group No.END
ENTER ENTER
Extn. No. KX-TDA50: 500KX-TDA100: Group 1=500KX-TDA200: Group 1=500KX-TDA600: Group 1=500
[680] Hunting Group No.END Circular/
Terminate
SELECT
ENTER ENTERKX-TDA50: 01–64KX-TDA100: 01–64KX-TDA200: 01–64KX-TDA600: 001–128
36 PT Programming Manual
2.1 PT Programming
[681] Idle Extension Hunting Group Member
[690] PS Registration
Notes
• Extension numbers of PSs can be a maximum of 4 digits.
• Please refer to the Installation Manual for details about PS registration.
KX-TDA50:→ 2.7.7 Connecting a Cell Station to the Hybrid IP-PBXKX-TDA100/KX-TDA200:→ 2.8.7 Connecting a Cell Station to the Hybrid IP-PBXKX-TDA600:→ 2.10.7 Connecting a Cell Station to the Hybrid IP-PBX
[691] PS Termination
[681]01–16
Location No.Hunting Group No.
END
ENTER
ENTER
Extn. No.
KX-TDA50: 01–64KX-TDA100: 01–64KX-TDA200: 01–64KX-TDA600: 001–128
[690] PS No.
KX-TD7690
ENDENTER ENTER
To the PSoperationbelow
Extn. No.
Push power button for 2 seconds.
Push F3 key for 2 seconds.
C.Tone
KX-TDA50: 001–028KX-TDA100: 001–128KX-TDA200: 001–128KX-TDA600 (without EMEC): 001–256KX-TDA600 (with EMEC): 001–512
See below
[691] PS No.END
ENTER ENTER
KX-TDA50: 001–028KX-TDA100: 001–128KX-TDA200: 001–128KX-TDA600: 001–512
See below
PT Programming Manual 37
2.1 PT Programming
[692] Personal Identification Number (PIN) for PS Registration
[699] CS Status Reference
2.1.10 Resource/Interface Programming
[700] External Pager Floating Extension Number[KX-TDA100/KX-TDA200/KX-TDA600]
[KX-TDA50]
[710] Music Source Selection for BGM (with the KX-TDA50)/BGM2 (with the KX-TDA100/KX-TDA200/KX-TDA600)
[711] Music on Hold
[692]4 digits
PIN for PS Registration END
ENTER ENTER1234
[699]END
Slot No.Reference only
CS Status
ENTER
Port No.
[700]1–2
Pager No.END
(HOLD)ENTER ENTER
CANCELNEXT
To the Next Pager No.To the Desired Pager No.
Extn. No.Pager 1: 600
[700]1
Pager No.END
(HOLD)ENTER ENTER
Extn. No.600
[710]END
External/ Internal1/ Internal2
ENTER ENTER
SELECT(AUTO ANS/MESSAGE)
[711]ENDKX-TDA50: Tone/BGM
KX-TDA100: Tone/BGM1–2KX-TDA200: Tone/BGM1–2KX-TDA600: Tone/BGM1–2
Music Source No.
ENTER ENTER
38 PT Programming Manual
2.1 PT Programming
[712] Music for Transfer
[720] Doorphone Call Destination[KX-TDA100/KX-TDA200/KX-TDA600]
[KX-TDA50]
[729] Doorphone Number Reference[KX-TDA100/KX-TDA200/KX-TDA600]
[KX-TDA50]
[730] Outgoing Message (OGM) Floating Extension Number
[712]END Hold Music/
Ring back
SELECT
ENTER ENTER
[720]
END
1 Day/2 Lunch/3 Break/4 Night
Max. 32 digits
Slot No.1–3 1–4
Card No. and Port No.Time No.
Destination No.
ENTER
ENTER
[720]
END
1 Day/2 Lunch/3 Break/4 Night
Max. 32 digits
Slot No. Port No.Time No.
Destination No.
ENTER
ENTER
1–4
[729]END
Slot No.1–3 1–4 Reference only
Doorphone No.
ENTER
Card No. and Port No.
[729]END
Slot No.Reference only
Doorphone No.
ENTER
Port No.1–4
[730]END
Message No.
ENTER ENTER
Extn. No.KX-TDA50: 01–32KX-TDA100: 01–64KX-TDA200: 01–64KX-TDA600: 01–64
KX-TDA50: 501–532KX-TDA100: 501–564KX-TDA200: 501–564KX-TDA600: 501–564
PT Programming Manual 39
2.1 PT Programming
[731] Outgoing Message (OGM) Name
[732] DISA Security Mode
2.1.11 SMDR & Maintenance Programming
[800] RS-232C Parameter—New Line Code
[800] RS-232C Parameter—Baud Rate
[800] RS-232C Parameter—Word Length
[800] RS-232C Parameter—Parity Bit
[800] RS-232C Parameter—Stop Bit Length
[731]END
Message No.Max. 20 characters
NameENTER ENTERKX-TDA50: 01–32
KX-TDA100: 01–64KX-TDA200: 01–64KX-TDA600: 01–64
[732]END None/
CO Line/All
SELECT
ENTER ENTER
[800]END
(HOLD)CR+LF/CR
SELECT(AUTO ANS/MESSAGE)1
Location
ENTER ENTER
[800]END2400/4800/9600/
19200/38400/57600/115200 bps
2
Location
ENTER ENTER
SELECT
[800]END7/ 8 bits
SELECT
3
Location
ENTER ENTER
[800]ENDNone/Mark/
Space/Even/Odd
SELECT
4
Location
ENTER ENTER
[800]END1 bit/2 bits
SELECT
5
Location
ENTER ENTER
40 PT Programming Manual
2.1 PT Programming
[801] External Modem Control
[802] SMDR Page Length
[803] SMDR Skip Perforation
[804] SMDR Outgoing Call Printing
[805] SMDR Incoming Call Printing
[810] Remote Programming
[811] Modem Floating Extension Number
[801]END
ENTER ENTER
Command No.1–5
[802]END4–99 lines
66
Page length
ENTER ENTER
[803]END0–95 lines
Skip Perforation
ENTER ENTER0
[804]ENDNo print/
SELECT
ENTER ENTER
[805]ENDNo print/
SELECT
ENTER ENTER
Disable/ Enable
SELECT[810]END
ENTER ENTER
[811]END
ENTER ENTER
Extn. No.599
PT Programming Manual 41
2.1 PT Programming
[812] ISDN Remote Floating Extension Number (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.1.12 Card Programming
[900] Slot Card Type Reference
[901] Slot Card Deletion
[902] Slot Card Reset
[910] OPB3 Option Card Type Reference (KX-TDA100/KX-TDA200/KX-TDA600 only)
[812]END
ENTER ENTER
Extn. No.
[900]Reference only
Slot No. Card NameEND
(HOLD)ENTER
[901]END
ENTER
Slot No. DeleteENTER
To the Next Slot No.To the Desired Slot No.
CANCEL NEXT
Confirming the deleting operation.
[902]END
Slot No. ResetENTER ENTER
Confirming the resetting operation.
[910]END
Slot No.Reference only
Option Card TypeENTER 1–3
Card No.
42 PT Programming Manual
2.1 PT Programming
[911] OPB3 Option Card Deletion (KX-TDA100/KX-TDA200/KX-TDA600 only)
[911]END
Slot No.1–3
Card No. DeleteENTER ENTER
Confirming the deleting operation.
PT Programming Manual 43
2.1 PT Programming
44 PT Programming Manual
Section 3
Appendix
PT Programming Manual 45
3.1 Revision History
3.1 Revision History
3.1.1 KX-TDA100/KX-TDA200 PMPR Software File Version 3.2xxx
Changed Contents• 2.1.2 Maximum Values
• [007] DSS Console Paired Telephone
• [601] Terminal Device Assignment
3.1.2 KX-TDA50 PSMPR Software File Version 4.0xxx
Changed Contents• 2.1.1 Programming Instructions
• 2.1.2 Maximum Values
46 PT Programming Manual
3.2 Feature Programming References
3.2 Feature Programming References
A
Absent Message• [008] Absent Message
Feature Manual Reference1.1.1 Absent Message
Account Code Entry• [508] Account Code Mode
Feature Manual Reference
1.1.2 Account Code Entry
ARS (Automatic Route Selection)• [320] ARS Mode
• [321] ARS Leading Number
• [322] ARS Routing Plan Table Number
• [325] ARS Exception Number
• [330] ARS Routing Plan Time Table
• [331–346] ARS Routing Plan Table (1–16) (KX-TDA50/KX-TDA100/KX-TDA200 only)
• [347] ARS Routing Plan Table (1–48) (KX-TDA600 only)
• [350] ARS Carrier Name
• [351] ARS Trunk Group for Carrier Access
• [352] ARS Removed Number of Digits for Carrier Access
• [353] ARS Carrier Access Code
Feature Manual Reference1.1.3 ARS (Automatic Route Selection)
C
Call Hold• [200] Hold Recall Time
Feature Manual Reference1.3.2 Call Hold
Call Pickup• [650] Extension User Groups of a Pickup Group
Feature Manual Reference
1.3.6 Call Pickup
Call Transfer• [201] Transfer Recall Time
• [503] Call Transfer to CO Line
• [712] Music for Transfer
PT Programming Manual 47
3.2 Feature Programming References
Feature Manual Reference
1.3.8 Call Transfer
Caller ID• [001] System Speed Dialing Number
• [002] System Speed Dialing Name
• [490] Caller ID Signal Type
Feature Manual Reference
1.3.1 Caller ID
CLI (Calling Line Identification) Distribution• [001] System Speed Dialing Number
• [002] System Speed Dialing Name
Feature Manual Reference
1.3.12 CLI (Calling Line Identification) Distribution
CLIP (Calling Line Identification Presentation)• [003] Extension Number
• [606] CLIP Number
Feature Manual Reference
1.3.13 CLIP (Calling Line Identification Presentation)
COS (Class of Service)• 2.1.8 COS Programming
• [602] Class of Service
Feature Manual Reference1.3.19 COS (Class of Service)
CPC (Calling Party Control) Signal Detection• [413] LCOT CPC Signal Detection Time—Outgoing
• [414] LCOT CPC Signal Detection Time—Incoming
Feature Manual Reference1.3.20 CPC (Calling Party Control) Signal Detection
CO Line Access• [400] LCOT CO Line Connection
• [401] LCOT CO Line Name
• [409] LCOT CO Line Number Reference
• [500] Trunk Group Number
Feature Manual Reference
1.3.14 CO Line Access
CO Line Call Limitation• [472] Extension-to-CO Line Call Duration
• [473] CO-to-CO Line Call Duration
• [502] CO Line Call Duration Limitation
48 PT Programming Manual
3.2 Feature Programming References
Feature Manual Reference
1.3.15 CO Line Call Limitation
D
Dial Mode Selection• [410] LCOT Dialing Mode
• [411] LCOT Pulse Rate
• [412] LCOT DTMF Minimum Duration
Feature Manual Reference
1.4.2 Dial Mode Selection
DID (Direct Inward Dialing)• [451] DID Number (KX-TDA100/KX-TDA200/KX-TDA600 only)
• [452] DID Name (KX-TDA100/KX-TDA200/KX-TDA600 only)
• [453] DID Destination (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual Reference
1.4.5 DID (Direct Inward Dialing)
DIL (Direct In Line)• [450] DIL 1:1 Destination
Feature Manual Reference
1.4.6 DIL (Direct In Line)
DISA (Direct Inward System Access)• [209] DISA Delayed Answer Time
• [210] DISA CO-to-CO Line Call Prolong Time
• [211] DISA Intercept Time
• [475] DISA Silence Detection
• [476] DISA Continuous Signal Detection
• [477] DISA Cyclic Signal Detection
• [604] Extension Intercept Destination
• [730] Outgoing Message (OGM) Floating Extension Number
• [731] Outgoing Message (OGM) Name
• [732] DISA Security Mode
Feature Manual Reference
1.4.7 DISA (Direct Inward System Access)
DND (Do Not Disturb)• [507] DND Override
Feature Manual Reference1.4.9 DND (Do Not Disturb)
Door Open• [207] Door Unlock Time
PT Programming Manual 49
3.2 Feature Programming References
• [512] Permission for Door Open Access
Feature Manual Reference
1.4.10 Door Open
Doorphone Call• [720] Doorphone Call Destination
• [729] Doorphone Number Reference
Feature Manual Reference
1.4.11 Doorphone Call
E
EFA (External Feature Access)• [417] LCOT Flash/Recall Time
Feature Manual Reference1.5.1 EFA (External Feature Access)
Emergency Call• [304] Emergency Number
Feature Manual Reference
1.5.2 Emergency Call
Executive Busy Override• [505] Executive Busy Override
• [506] Executive Busy Override Deny
Feature Manual Reference
1.5.3 Executive Busy Override
Extension Dial Lock• [510] TRS Level for Extension Dial Lock
Feature Manual Reference
1.5.4 Extension Dial Lock
Extension PIN (Personal Identification Number)• [005] Extension Personal Identification Number (PIN)
Feature Manual Reference1.5.6 Extension PIN (Personal Identification Number)
Extension Port Configuration• [007] DSS Console Paired Telephone
• [600] EXtra Device Port (XDP) Mode
Feature Manual Reference1.5.7 Extension Port Configuration
50 PT Programming Manual
3.2 Feature Programming References
F
Flash/Recall/Terminate• [418] LCOT Disconnect Time
Feature Manual Reference
1.6.2 Flash/Recall/Terminate
Flexible Numbering/Fixed Numbering• [100] Flexible Numbering
Feature Manual Reference1.6.4 Flexible Numbering/Fixed Numbering
Floating Extension• [623] Incoming Call Distribution Group Name
• [660] VM Group Floating Extension Number
• [700] External Pager Floating Extension Number
• [730] Outgoing Message (OGM) Floating Extension Number
• [731] Outgoing Message (OGM) Name
• [811] Modem Floating Extension Number
• [812] ISDN Remote Floating Extension Number (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual Reference1.6.5 Floating Extension
FWD (Call Forwarding)• [472] Extension-to-CO Line Call Duration
• [473] CO-to-CO Line Call Duration
• [504] Call Forwarding to CO Line
• [605] Call Forwarding—No Answer Time
Feature Manual Reference
1.6.6 FWD (Call Forwarding)
H
Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)• [471] Host PBX Access Code
Feature Manual Reference1.8.5 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
Hot Line• [204] Hot Line Waiting Time
Feature Manual Reference
1.8.6 Hot Line
PT Programming Manual 51
3.2 Feature Programming References
I
ICD Group Features• [620] Incoming Call Distribution Group Member
• [621] Incoming Call Distribution Group Delayed Ringing
• [622] Incoming Call Distribution Group Floating Extension Number
• [623] Incoming Call Distribution Group Name
• [624] Incoming Call Distribution Group Distribution Method
• [625] Destination for Overflow Time Expiration
• [626] Overflow Time
• [627] Destination When All Busy
• [628] Queuing Call Capacity
• [629] Queuing Hurry-up Level
• [630] Queuing Time Table
• [631] Sequences in Queuing Time Table
• [632] Maximum Number of Agents
Feature Manual Reference
1.9.1 ICD GROUP FEATURES
ICD Group Features—Group Call Distribution• [621] Incoming Call Distribution Group Delayed Ringing
• [624] Incoming Call Distribution Group Distribution Method
• [632] Maximum Number of Agents
Feature Manual Reference1.9.2 ICD Group Features—Group Call Distribution
ICD Group Features—Outside Destinations• [620] Incoming Call Distribution Group Member
• [621] Incoming Call Distribution Group Delayed Ringing
• [622] Incoming Call Distribution Group Floating Extension Number
• [624] Incoming Call Distribution Group Distribution Method
• [629] Queuing Hurry-up Level
Feature Manual Reference
1.9.4 ICD Group Features—Outside Destinations
ICD Group Features—Overflow• [625] Destination for Overflow Time Expiration
• [626] Overflow Time
• [627] Destination When All Busy
• [628] Queuing Call Capacity
• [632] Maximum Number of Agents
Feature Manual Reference
1.9.5 ICD Group Features—Overflow
52 PT Programming Manual
3.2 Feature Programming References
ICD Group Features—Queuing• [628] Queuing Call Capacity
• [629] Queuing Hurry-up Level
• [630] Queuing Time Table
• [631] Sequences in Queuing Time Table
• [632] Maximum Number of Agents
Feature Manual Reference
1.9.6 ICD Group Features—Queuing
Idle Extension Hunting• [680] Idle Extension Hunting Type
• [681] Idle Extension Hunting Group Member
Feature Manual Reference
1.9.9 Idle Extension Hunting
Intercept Routing• [203] Intercept Time
• [604] Extension Intercept Destination
• [625] Destination for Overflow Time Expiration
Feature Manual Reference
1.9.11 Intercept Routing
Intercept Routing—No Destination• [006] Operator Assignment
Feature Manual Reference
1.9.12 Intercept Routing—No Destination
Intercom Call• [003] Extension Number
• [004] Extension Name
Feature Manual Reference
1.9.13 Intercom Call
L
Line Preference—Outgoing• [103] Idle Line Access (Local Access)
• [500] Trunk Group Number
Feature Manual Reference1.10.3 Line Preference—Outgoing
M
Manager Features• [112] Manager Password
PT Programming Manual 53
3.2 Feature Programming References
• [511] Manager Assignment
Feature Manual Reference
1.11.1 Manager Features
Music on Hold• [710] Music Source Selection for BGM (with the KX-TDA50)/BGM2 (with the KX-TDA100/
KX-TDA200/KX-TDA600)
• [711] Music on Hold
Feature Manual Reference
1.11.4 Music on Hold
O
OGM (Outgoing Message)• [631] Sequences in Queuing Time Table
• [730] Outgoing Message (OGM) Floating Extension Number
Feature Manual Reference
1.12.2 OGM (Outgoing Message)
Operator Features• [006] Operator Assignment
Feature Manual Reference1.12.5 Operator Features
P
Paging• [640] Extension User Groups of a Paging Group
• [641] External Pagers of a Paging Group
Feature Manual Reference
1.13.1 Paging
Paralleled Telephone• [600] EXtra Device Port (XDP) Mode
Feature Manual Reference
1.13.2 Paralleled Telephone
Pause Insertion• [416] LCOT Pause Time
Feature Manual Reference1.13.4 Pause Insertion
PC Console/PC Phone• [601] Terminal Device Assignment
Feature Manual Reference
1.13.5 PC Console/PC Phone
54 PT Programming Manual
3.2 Feature Programming References
Private Network Features• [453] DID Destination (KX-TDA100/KX-TDA200/KX-TDA600 only)
• [500] Trunk Group Number
Feature Manual Reference1.13.13 PRIVATE NETWORK FEATURES
Private Network Features—NDSS (Network Direct Station Selection)• [511] Manager Assignment
Feature Manual Reference
1.13.15 Private Network Features—NDSS (Network Direct Station Selection)
Private Network Features—PS Roaming by Network ICD Group• [620] Incoming Call Distribution Group Member
• [622] Incoming Call Distribution Group Floating Extension Number
• [624] Incoming Call Distribution Group Distribution Method
Feature Manual Reference1.13.17 Private Network Features—PS Roaming by Network ICD Group
Private Network Features—QSIG—CLIP/COLP (Calling/Connected Line Identification Presentation) and CNIP/CONP (Calling/Connected Name Identification Presentation)
• [003] Extension Number
• [004] Extension Name
Feature Manual Reference1.13.21 Private Network Features—QSIG—CLIP/COLP (Calling/Connected Line Identification Presentation) and CNIP/CONP (Calling/Connected Name Identification Presentation)
PS Connection• [690] PS Registration
• [691] PS Termination
• [692] Personal Identification Number (PIN) for PS Registration
Feature Manual Reference
1.13.24 PS Connection
PS Directory• [001] System Speed Dialing Number
• [002] System Speed Dialing Name
• [004] Extension Name
Feature Manual Reference
1.13.25 PS Directory
PS Ring Group• [620] Incoming Call Distribution Group Member
Feature Manual Reference
1.13.27 PS Ring Group
PT Programming Manual 55
3.2 Feature Programming References
PT Programming• 2.1 PT Programming
• [516] Programming Mode Limitation
Feature Manual Reference1.13.28 PT Programming
R
Redial, Last Number• [205] Automatic Redial Repeat Times (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual Reference
1.15.1 Redial, Last Number
S
SMDR (Station Message Detail Recording)• [800] RS-232C Parameter—New Line Code
• [800] RS-232C Parameter—Baud Rate
• [800] RS-232C Parameter—Word Length
• [800] RS-232C Parameter—Parity Bit
• [800] RS-232C Parameter—Stop Bit Length
• [802] SMDR Page Length
• [803] SMDR Skip Perforation
• [804] SMDR Outgoing Call Printing
• [805] SMDR Incoming Call Printing
Feature Manual Reference
1.16.1 SMDR (Station Message Detail Recording)
Special Carrier Access Code• [303] Special Carrier Access Code
Feature Manual Reference1.16.2 Special Carrier Access Code
Speed Dialing, System• [001] System Speed Dialing Number
• [002] System Speed Dialing Name
• [509] TRS Level for System Speed Dialing
Feature Manual Reference
1.16.4 Speed Dialing, System
T
TAFAS (Trunk Answer From Any Station)• [700] External Pager Floating Extension Number
Feature Manual Reference
56 PT Programming Manual
3.2 Feature Programming References
1.17.2 TAFAS (Trunk Answer From Any Station)
Tenant Service• [001] System Speed Dialing Number
• [006] Operator Assignment
• [320] ARS Mode
• [711] Music on Hold
Feature Manual Reference
1.17.3 Tenant Service
Time Service• [101] Time Service Switching Mode
• [102] Time Service Starting Time
• [514] Time Service Manual Switching
Feature Manual Reference1.17.5 Time Service
TRS (Toll Restriction)• [300] TRS Override by System Speed Dialing
• [301] TRS Denied Code
• [302] TRS Exception Code
• [501] TRS Level
• [509] TRS Level for System Speed Dialing
• [602] Class of Service
Feature Manual Reference
1.17.6 TRS (Toll Restriction)
U
Upgrading the Software• [190] Main Processing (MPR) Software Version Reference
Feature Manual Reference1.18.1 Upgrading the Software
V
Verification Code Entry• [120] Verification Code
• [121] Verification Code Name
• [122] Verification Code Personal Identification Number (PIN)
• [123] Verification Code COS Number
Feature Manual Reference
1.19.1 Verification Code Entry
PT Programming Manual 57
3.2 Feature Programming References
Virtual PS• [690] PS Registration
Feature Manual Reference
1.19.2 Virtual PS
Voice Mail (VM) Group• [601] Terminal Device Assignment
• [660] VM Group Floating Extension Number
Feature Manual Reference
1.19.3 Voice Mail (VM) Group
Voice Mail DPT (Digital) Integration• [201] Transfer Recall Time
Feature Manual Reference
1.19.4 Voice Mail DPT (Digital) Integration
W
Walking COS• [005] Extension Personal Identification Number (PIN)
Feature Manual Reference
1.20.1 Walking COS
Walking Extension• [007] DSS Console Paired Telephone
Feature Manual Reference
1.20.2 Walking Extension
Wireless XDP Parallel Mode• [515] Wireless XDP Parallel Mode for Paired Telephone
Feature Manual Reference1.20.4 Wireless XDP Parallel Mode
58 PT Programming Manual
3.2 Feature Programming References
PT Programming Manual 59
Panasonic Consumer Electronics Company,Division of Panasonic Corporation of North AmericaOne Panasonic Way, Secaucus, New Jersey 07094
Panasonic Puerto Rico, Inc.San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5,Carolina, Puerto Rico 00985
http://www.panasonic.com/csd
Copyright:This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd.
© 2006 Panasonic Communications Co., Ltd. All Rights Reserved.
PSQX3823XA KK0206ET2017