PT Programming Manual - DataComdatacomfirst.com/documents/302_TDA_PTPM_10-11[1].pdf · Introduction...

Thank you for purchasing a Panasonic Hybrid IP-PBX.

Please read this manual carefully before using this product and save this manual for future use.

KX-TDA50: PSMPR Software File Version 6.0000 or later

KX-TDA100/KX-TDA200: PMPR Software File Version 5.0000 or later

KX-TDA600: PLMPR Software File Version 5.0000 or later

Document Version: 2010-11

Model No. KX-TDA50/KX-TDA100KX-TDA200/KX-TDA600

Hybrid IP-PBX

PT Programming Manual

IntroductionAbout this Programming Manual

The PT Programming Manual is designed to serve as a reference to programming the Panasonic HybridIP-PBX using a Panasonic proprietary telephone (PT) with display.

The PT Programming Manual is divided into the following sections:

Section 1, OverviewProvides an overview of programming the PBX.

Section 2, PT ProgrammingServes as reference operating instructions when using a display PT to program the PBX.

Section 3, AppendixProvides a list of all related PT programming items for each feature as Feature Programming References.

References Found in the PT Programming ManualPT Programming Manual ReferencesRelated sections of the PT Programming Manual are listed for your reference.

Feature Manual ReferencesThe Feature Manual explains what the PBX can do, as well as how to obtain the most of its many features andfacilities. Sections from the Feature Manual are listed throughout the PT Programming Manual for yourreference.

Links to Other Pages and ManualsIf you are viewing this manual with a PC, certain items are linked to different sections of the PT ProgrammingManual and other Hybrid IP-PBX manuals. Click on a link to jump to that section.Linked items include:• PT Programming Manual References• Feature Manual References

2 PT Programming Manual Document Version 2010-11

Introduction

Safety NoticesPlease observe the safety notices in this manual in order to avoid danger to users or other people, and preventdamage to property.The notices are classified as follows, according to the severity of injury or damage:

WARNING This notice means that misuse could result in death or serious injury.

CAUTION This notice means that misuse could result in injury or damage to property.

WARNINGUnplug the PBX from the AC outlet if it emits smoke, an abnormal smell or makes unusual noise.These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact anauthorized Panasonic Factory Service Center.

NOTES• The contents of this manual apply to PBXs with a certain software version, as indicated on the cover of

this manual. To confirm the software version of your PBX, see [190] Main Processing (MPR) SoftwareVersion Reference.

• Some optional service cards, PTs, and features are not available in some areas. Additionally, some optionalservice cards and features are not available for some PBX models. Please consult your certifiedPanasonic dealer for more information.

• Product specifications are subject to change without notice.• In this manual, model number suffixes (e.g., KX-TDA50G) are omitted unless necessary.

Document Version 2010-11 PT Programming Manual 3

Introduction

Table of Contents1 Overview ...................................................................................................91.1 Introduction .....................................................................................................................101.1.1 Introduction .....................................................................................................................101.1.2 Password Security ..........................................................................................................111.1.3 Entering Characters .......................................................................................................12

2 PT Programming ....................................................................................152.1 PT Programming .............................................................................................................162.1.1 Programming Instructions ..............................................................................................162.1.2 Maximum Values ............................................................................................................182.1.3 Basic Programming ........................................................................................................20

[000] Date & Time ........................................................................................................20[001] System Speed Dialing Number ..........................................................................20[002] System Speed Dialing Name ..............................................................................20[003] Extension Number ..............................................................................................21[004] Extension Name .................................................................................................21[005] Extension Personal Identification Number (PIN) ................................................21[006] Operator Assignment ..........................................................................................21[007] DSS Console Paired Telephone .........................................................................21[008] Absent Message .................................................................................................22

2.1.4 System Management Programming ...............................................................................22[100] Flexible Numbering .............................................................................................22[101] Time Service Switching Mode ............................................................................22[102] Time Service Starting Time ................................................................................23[103] Idle Line Access (Local Access) .........................................................................23[110] System Password for Administrator—for PT Programming ...............................23[111] System Password for User—for PT Programming .............................................23[112] Manager Password .............................................................................................23[120] Verification Code ................................................................................................24[121] Verification Code Name ......................................................................................24[122] Verification Code Personal Identification Number (PIN) .....................................24[123] Verification Code COS Number ..........................................................................24[190] Main Processing (MPR) Software Version Reference ........................................24

2.1.5 Timer Programming ........................................................................................................25[200] Hold Recall Time ................................................................................................25[201] Transfer Recall Time ..........................................................................................25[203] Intercept Time .....................................................................................................25[204] Hot Line Waiting Time ........................................................................................25[205] Automatic Redial Repeat Times (KX-TDA100/KX-TDA200/KX-TDA600only) .............................................................................................................................25[207] Door Unlock Time ...............................................................................................25[208] Call Duration Count Starting Time for LCOT ......................................................26[209] DISA Delayed Answer Time ...............................................................................26[210] DISA CO-to-CO Line Call Prolong Time .............................................................26[211] DISA Intercept Time ...........................................................................................26

2.1.6 TRS/ARS Programming .................................................................................................26[300] TRS Override by System Speed Dialing ............................................................26[301] TRS Denied Code ..............................................................................................26[302] TRS Exception Code ..........................................................................................27[303] Special Carrier Access Code ..............................................................................27[304] Emergency Number ............................................................................................27[320] ARS Mode ..........................................................................................................27


Table of Contents

[321] ARS Leading Number .........................................................................................27[322] ARS Routing Plan Table Number .......................................................................27[325] ARS Exception Number ......................................................................................28[330] ARS Routing Plan Time Table ............................................................................28[331–346] ARS Routing Plan Table (1–16) (KX-TDA50/KX-TDA100/KX-TDA200only) .............................................................................................................................28[347] ARS Routing Plan Table (1–48) (KX-TDA600 only) ...........................................28[350] ARS Carrier Name ..............................................................................................29[351] ARS Trunk Group for Carrier Access .................................................................29[352] ARS Removed Number of Digits for Carrier Access ..........................................29[353] ARS Carrier Access Code ..................................................................................29

2.1.7 CO Line Programming ....................................................................................................29[400] LCOT CO Line Connection .................................................................................29[401] LCOT CO Line Name .........................................................................................30[402] LCOT Trunk Group Number ...............................................................................30[409] LCOT CO Line Number Reference ....................................................................30[410] LCOT Dialing Mode ............................................................................................30[411] LCOT Pulse Rate ...............................................................................................30[412] LCOT DTMF Minimum Duration .........................................................................30[413] LCOT CPC Signal Detection Time—Outgoing ...................................................31[414] LCOT CPC Signal Detection Time—Incoming ...................................................31[416] LCOT Pause Time ..............................................................................................31[417] LCOT Flash/Recall Time ....................................................................................31[418] LCOT Disconnect Time ......................................................................................31[450] DIL 1:1 Destination .............................................................................................31[451] DID Number ........................................................................................................32[452] DID Name ...........................................................................................................32[453] DID Destination ..................................................................................................32[471] Host PBX Access Code ......................................................................................32[472] Extension-to-CO Line Call Duration ...................................................................32[473] CO-to-CO Line Call Duration ..............................................................................32[475] DISA Silence Detection ......................................................................................33[476] DISA Continuous Signal Detection .....................................................................33[477] DISA Cyclic Signal Detection .............................................................................33[490] Caller ID Signal Type ..........................................................................................33

2.1.8 COS Programming .........................................................................................................34[500] Trunk Group Number ..........................................................................................34[501] TRS Level ...........................................................................................................34[502] CO Line Call Duration Limitation ........................................................................34[503] Call Transfer to CO Line .....................................................................................34[504] Call Forwarding to CO Line ................................................................................34[505] Executive Busy Override ....................................................................................35[506] Executive Busy Override Deny ...........................................................................35[507] DND Override .....................................................................................................35[508] Account Code Mode ...........................................................................................35[509] TRS Level for System Speed Dialing .................................................................35[510] TRS Level for Extension Dial Lock .....................................................................35[511] Manager Assignment ..........................................................................................35[512] Permission for Door Open Access .....................................................................36[514] Time Service Manual Switching .........................................................................36[515] Wireless XDP Parallel Mode for Paired Telephone ............................................36[516] Programming Mode Limitation ............................................................................36

2.1.9 Extension Programming .................................................................................................37[600] EXtra Device Port (XDP) Mode ..........................................................................37[601] Terminal Device Assignment ..............................................................................37


Table of Contents

[602] Class of Service ..................................................................................................37[603] Extension User Group ........................................................................................37[604] Extension Intercept Destination ..........................................................................38[605] Call Forwarding—No Answer Time ....................................................................38[606] CLIP Number ......................................................................................................38[620] Incoming Call Distribution Group Member ..........................................................38[621] Incoming Call Distribution Group Delayed Ringing ............................................38[622] Incoming Call Distribution Group Floating Extension Number ...........................39[623] Incoming Call Distribution Group Name .............................................................39[624] Incoming Call Distribution Group Distribution Method ........................................39[625] Destination for Overflow Time Expiration ...........................................................39[626] Overflow Time ....................................................................................................39[627] Destination When All Busy .................................................................................40[628] Queuing Call Capacity ........................................................................................40[629] Queuing Hurry-up Level .....................................................................................40[630] Queuing Time Table ...........................................................................................40[631] Sequences in Queuing Time Table ....................................................................40[632] Maximum Number of Agents ..............................................................................41[640] Extension User Groups of a Paging Group ........................................................41[641] External Pagers of a Paging Group ....................................................................41[650] Extension User Groups of a Pickup Group .........................................................41[660] VM Group Floating Extension Number ...............................................................42[680] Idle Extension Hunting Type ...............................................................................42[681] Idle Extension Hunting Group Member ..............................................................42[690] PS Registration ...................................................................................................42[691] PS Termination ...................................................................................................43[692] Personal Identification Number (PIN) for PS Registration ..................................43[699] CS Status Reference ..........................................................................................43

2.1.10 Resource/Interface Programming ..................................................................................43[700] External Pager Floating Extension Number .......................................................43[710] Music Source Selection for BGM (with the KX-TDA50)/BGM2 (with theKX-TDA100/KX-TDA200/KX-TDA600) ........................................................................44[711] Music on Hold .....................................................................................................44[712] Music for Transfer ...............................................................................................44[720] Doorphone Call Destination ................................................................................44[729] Doorphone Number Reference ..........................................................................45[730] Outgoing Message (OGM) Floating Extension Number .....................................45[731] Outgoing Message (OGM) Name .......................................................................45[732] DISA Security Mode ...........................................................................................45

2.1.11 SMDR & Maintenance Programming .............................................................................45[800] RS-232C Parameter—New Line Code ...............................................................45[800] RS-232C Parameter—Baud Rate ......................................................................46[800] RS-232C Parameter—Word Length ...................................................................46[800] RS-232C Parameter—Parity Bit .........................................................................46[800] RS-232C Parameter—Stop Bit Length ...............................................................46[801] External Modem Control .....................................................................................46[802] SMDR Page Length ............................................................................................46[803] SMDR Skip Perforation ......................................................................................46[804] SMDR Outgoing Call Printing .............................................................................47[805] SMDR Incoming Call Printing .............................................................................47[810] Remote Programming ........................................................................................47[811] Modem Floating Extension Number ...................................................................47[812] ISDN Remote Floating Extension Number (KX-TDA100/KX-TDA200/KX-TDA600only) .............................................................................................................................47

2.1.12 Card Programming .........................................................................................................47


Table of Contents

[900] Slot Card Type Reference ..................................................................................47[901] Slot Card Deletion ..............................................................................................48[902] Slot Card Reset ..................................................................................................48[910] OPB3 Option Card Type Reference (KX-TDA100/KX-TDA200/KX-TDA600only) .............................................................................................................................48[911] OPB3 Option Card Deletion (KX-TDA100/KX-TDA200/KX-TDA600 only) .........48

3 Appendix .................................................................................................493.1 Revision History ..............................................................................................................503.1.1 KX-TDA100/KX-TDA200 PMPR Software File Version 3.2xxx ......................................503.1.2 KX-TDA100/KX-TDA200 PMPR Software File Version 5.0xxx ......................................503.1.3 KX-TDA50 PSMPR Software File Version 4.0xxx ..........................................................503.1.4 KX-TDA50 PSMPR Software File Version 5.0xxx ..........................................................503.2 Feature Programming References ................................................................................51


Table of Contents


Table of Contents

Section 1

Overview

This section provides an overview of programming thePBX.


1.1 Introduction

1.1.1 IntroductionThese programming instructions are designed to serve as an overall system programming reference for thePanasonic Hybrid IP-PBX. Each feature in the PBX has default settings that can be changed to customize thePBX to your requirements. These settings control the functions of the PBX, and changing them is referred toas "system programming".Only one person can perform system programming at a time. Any other users trying to enter systemprogramming mode will be denied access.

Ways to ProgramThere are two programming methods:• PC (Personal Computer) Programming

All features and settings of the PBX can be programmed through PC programming with MaintenanceConsole. Installing and starting Maintenance Console are explained in the Installation Manual.

• PT (Proprietary Telephone) ProgrammingA subset of the features and settings of the PBX can be programmed using a PT. PT programming isdescribed in Section 2.1 PT Programming. An extension user can perform system programming byentering three-digit programming numbers with a PT.


1.1.1 Introduction

1.1.2 Password SecurityTo maintain system security, system passwords are required to access certain programming functions of thePBX. By giving different users access to different passwords, it is possible to control the amount ofprogramming that each user is able to perform.The following types of system passwords are available:

Password Description Format

System Password (PT) forUser

Used to access user-level PT programming. The specific PTprogramming items that may be programmed at user levelcan be selected through system programming.

4 – 10 digits

System Password (PT) forAdministrator

Used to access administrator-level PT programming. All PTprogramming settings are available.

CAUTIONTo the Administrator or Installer regarding the system password1. Please provide all system passwords to the customer.2. To avoid unauthorized access and possible abuse of the PBX, keep the passwords secret, and inform

the customer of the importance of the passwords, and the possible dangers if they become known toothers.

3. The PBX has default passwords preset. For security, change these passwords the first time that youprogram the PBX.

4. Change the passwords periodically.5. It is strongly recommended that passwords of 10 numbers or characters be used for maximum

protection against unauthorized access. For a list of numbers and characters that can be used in systempasswords, refer to Section 1.1.3 Entering Characters.

6. If a system password is forgotten, it can be found by loading a backup of the system data into a PC,and checking the password using the Maintenance Console software. If you do not have a backup ofthe system data, you must reset the PBX to its factory defaults and reprogram it. Therefore, we stronglyrecommend maintaining a backup of the system data. For more information on how to back up thesystem data, refer to the on-line help of the Maintenance Console. However, as system passwordscan be extracted from backup copies of the system data file, do not allow unauthorized access to thesefiles.


1.1.2 Password Security

1.1.3 Entering CharactersThe following characters can be used when storing a name, message, or other text entry data using a PT. Thetables below show you the characters available by pushing each button a specific number of times.

Table 1 (Standard mode)

Table 2 (Option mode)


1.1.3 Entering Characters

[Example of Entering Characters]To enter "Ann":

A n n

6 (5 times) 6 (5 times)2FWD/DND

OR

Note• To erase the character on the cursor, press CLEAR.• To move the cursor to the left, press .• To move the cursor to the right, press . When entering two or more characters that use the same

button consecutively (e.g. "G" and "I"), you must press this button or the FWD/DND button after enteringthe first character.

• If SELECT is pressed, the characters for each button will be displayed in reverse order.• To toggle between Table 1 and Table 2 when using the KX-NT300/KX-DT300/KX-T7600 series, press

the leftmost soft button.



Section 2

PT Programming

This section serves as reference operating instructionswhen using a display PT to program the PBX.


2.1 PT Programming

2.1.1 Programming InstructionsRequired Telephone/Extension

PBX settings can be customized through system programming by using a proprietary telephone (PT) with amultiline display, such as the KX-NT343 or KX-DT346. To access system programming, the Class of Service(COS) assigned to the PT’s extension must be programmed to allow system programming, or the PT must beconnected to the lowest-numbered port on the card installed in the lowest-numbered slot.Only one system programming session can be performed at a time. This means that only one user can accesssystem programming at a time, whether through a PT or PC.For a list of characters that can be entered during system programming, see Section 1.1.3 EnteringCharacters.

Buttons and Functions

Fixed ButtonsFunction

KX-NT300/KX-DT300 KX-NT136/KX-T7600 KX-T7200/KX-T7400*1

REDIAL PREVIOUS

SP-PHONE NEXT

FWD/DND (Page up)

CONF (Page down)

AUTO DIAL

STORE

ENTER

— Back to Previous Menu(CANCEL)

SHIFT SHIFT SHIFT SHIFT

PAUSE PAUSE

PROGRAM PAUSEPROGRAM

HOLD HOLD END

AUTO ANS

MUTE

MESSAGE

MUTE

AUTO ANSWER MESSAGE SELECT


2.1.1 Programming Instructions

Fixed ButtonsFunction

KX-NT300/KX-DT300 KX-NT136/KX-T7600 KX-T7200/KX-T7400*1

FLASH/RECALL FLASH FLASH

TRANSFER

TRANSFERCLEAR

INTERCOM

INTERCOMSECRET

*1 The buttons shown in this column are from the KX-T7400 series.

Entering System Programming ModeUsing a PT to perform system programming allows an authorized extension user to set a wide range of PBXfeatures and parameters.There are two levels of system programming that can be performed with a PT: administrator-level programmingand user-level programming.

Administrator Level:Allows the programming of all settings accessible through PT programming.

PROGRAM/ PAUSE

#

= 1234

System Password for AdministratorProgramming No.

3 digits —for PT Programming

User Level:Allows the programming of limited settings as permitted through PC programming.

= 1234

Programming No.

3 digits

System Password for User

—for PT ProgrammingPROGRAM/

PAUSE

Note means default value throughout this manual.

Programming StructureProgramming

Number Programming Group Title Description

[0XX] Basic Programming Frequently used programming steps

[1XX] System ManagementProgramming

Global system parameters

[2XX] Timer Programming System timers


2.1.1 Programming Instructions

ProgrammingNumber Programming Group Title Description

[3XX] TRS/ARS Programming TRS and Automatic Route Selection (ARS)programming

[4XX] CO Line Programming CO line and trunk group settings

[5XX] COS Programming Class of Service parameters

[6XX] Extension Programming Extension feature settings

[7XX] Resource/InterfaceProgramming

PBX interface and external device settings

[8XX] SMDR & MaintenanceProgramming

Station Message Detail Recording (SMDR) andmaintenance feature settings

[9XX]Card Programming Used to display the cards currently installed in the

PBX, or to "delete" a card from systemprogramming before physically removing it.

2.1.2 Maximum ValuesThroughout this manual, maximum entry values are shown for each programming item. When maximum entryvalues for one or more of the supported PBX models differ, these differences are listed within the programmingitem, as shown in the example below.

These values vary by PBX model

[351] Carrier Table No. Trunk Group No.END

ENTER ENTERKX-TDA50: 01–10KX-TDA100: 01–10KX-TDA200: 01–10KX-TDA600: 01–48

KX-TDA50: 01–64KX-TDA100: 01–64KX-TDA200: 01–64KX-TDA600: 01–96

Disable/ Enable

SELECT

However, please note that extension number, slot and port entry values are not listed within each programmingitem. These values vary depending on the model of PBX and the card type installed, as shown below.

Extension NumbersAll models: 1–5 digits

Feature NumbersAll models: 1–4 digits

KX-TDA50 Slot and Port ValuesAvailable Slot Entry Values

Slot Number Supported Cards

01 Pre-installed Super Hybrid Ports

02–04 DLC4, HLC4, PLC4, LCOT4 cards


2.1.2 Maximum Values


05–07 DLC8, PLC8, SLC8 cards

08–09 DPH4 card

Enter slot numbers as two-digit numbers (e.g. "04" for slot 4).

Available Port Entry Values

Card Type Port Number Related Programming

DLC4 01–04

[600] [601]

HLC4 01–04

PLC4 01–04

DLC8 01–08

PLC8 01–08

DPH4 01–04 [72x]

LCOT4 01–04 [40x] [41x] [450]

Pre-installed Super Hybrid Ports 01–04 [600] [601]

Enter values as two-digit numbers (e.g. "04" for port 4).

KX-TDA100/KX-TDA200/KX-TDA600 Slot and Port ValuesAvailable Slot Entry ValuesKX-TDA100/KX-TDA200

PBX Model Slot Number Supported Cards

KX-TDA100 01–06All cards

KX-TDA200 01–11

Enter slot numbers as two-digit numbers (e.g. "04" for slot 4).

KX-TDA600


101–110

All cards201–211301–311401–411

Enter slot numbers as three-digit numbers of the form "XYY":• X: Shelf number (1-4)• YY: Slot number (01-11)


2.1.2 Maximum Values

Available Port Entry Values

Card Type Port Number Related Programming

DHLC8 01–08

[600] [601]DLC8 01–08

DLC16 01–16

DPH4 11–34*1 [72x]

LCOT8 (KX-TDA100/KX-TDA200 only)

01–08 [400] [409] [41x] [450]

LCOT16 (KX-TDA100/KX-TDA200 only)

01–16

ELCOT16 (KX-TDA600 only) 01–16

Enter values as two-digit numbers (e.g. "04" for port 4).*1 Enter card number and port number as single-digit numbers (e.g. "34" for card 3, port 4).

2.1.3 Basic Programming[000] Date & Time

[000]00–99

Year

01–31

Date

01–12

Hour

00–59

Minute

END(HOLD)

ENTER ENTER

ENTER

01–12

Month

NEXTAM/PM

SELECT(AUTO ANS/MESSAGE)

[001] System Speed Dialing Number

[001]000–999

Speed Dialing No. Telephone No.

Max. 32 digits ENDENTER ENTER

CANCELNEXT

To the Next Speed Dialing No.

To the Desired Speed Dialing No.

[002] System Speed Dialing Name

[002] Name

Max. 20 characters ENDENTER ENTER

000–999

Speed Dialing No.


2.1.3 Basic Programming

[003] Extension Number

[003] New Extn. No.END

Current Extn. No.

ENTER ENTER101–

Note• Extension numbers of PSs can be a maximum of 4 digits.• If PC Phone, PC Console, or a CTI application is running on a PC connected to an extension whose

extension number is to be programmed/modified, quit the application first.

[004] Extension Name

[004] NameMax. 20 characters END

Extn. No.

ENTER ENTER

[005] Extension Personal Identification Number (PIN)

[005]ENDMax. 10 digits

PIN

ENTER ENTER

Extn. No.

CAUTIONThere is a risk that fraudulent telephone calls will be made if a third party discovers a personal identificationnumber (PIN) (verification code PIN or extension PIN) of the PBX.The cost of such calls will be billed to the owner/renter of the PBX.To protect the PBX from this kind of fraudulent use, we strongly recommend:a. Keeping PINs secret.b. Selecting complex, random PINs that cannot be easily guessed.c. Changing PINs frequently.

[006] Operator Assignment

[006]END

Extn. No.

ENTER ENTER1 Day/2 Lunch/3 Break/4 Night

Time No.101–

[007] DSS Console Paired Telephone

[007]KX-TDA50: 01–04KX-TDA100: 01–08KX-TDA200: 01–08KX-TDA600: 01–64

DSS Console No.END

ENTER ENTER

Extn. No.


2.1.3 Basic Programming

NoteThis program is only available after the port connected to the DSS Console is assigned as "DSSConsole" in [601] Terminal Device Assignment.If one or more SDN buttons have been set at the DSS Console, they must be deleted before this settingcan be changed (KX-TDA100/KX-TDA200/KX-TDA600 only).

[008] Absent Message

[008]1–8

Location No.END

Message

ENTER ENTERMax. 16 characters

For default values, see "1.1.1 Absent Message" in the Feature Manual.

2.1.4 System Management Programming[100] Flexible Numbering

[100]01–68

Location No. Feature No.END

(HOLD)ENTER ENTER

CANCELNEXT

To the Next Location No.

To the Desired Location No.

For default values, see "6.1.4 Flexible Numbering/Fixed Numbering" in the Feature Manual.

[101] Time Service Switching Mode

[101]Manual/Automatic

ENDSELECT

(AUTO ANS/MESSAGE)ENTER ENTER


2.1.4 System Management Programming

[102] Time Service Starting Time

[102]

01:00–12:59

Hour:MinuteEND

ENTER

ENTER

Day No. Time No.0 Sun/1 Mon/2 Tue/3 Wed/4 Thu/5 Fri/6 Sat

1 Day-1/2 Lunch/3 Day-2/4 Night

Page up

NEXT

To the Next Time No.

To the Next Day No.

AM/PM

SELECT

[103] Idle Line Access (Local Access)

[103] Location No. Trunk Group No.END



Location No.=Trunk Group No.

[110] System Password for Administrator—for PT Programming

[110]4–10 digits

PasswordEND

ENTER ENTER1234

[111] System Password for User—for PT Programming

[111]4–10 digits

PasswordEND

ENTER ENTER1234

[112] Manager Password

[112]4–10 digits

PasswordEND

ENTER ENTER1234



[120] Verification Code

[120]0001–1000

Location No.1–4 digits

Verification CodeEND

ENTER ENTER

[121] Verification Code Name

[121]0001–1000

Location No.Max. 20 characters

NameEND

ENTER ENTER

[122] Verification Code Personal Identification Number (PIN)

[122]0001–1000

Location No.Max. 10 digits

PINEND

ENTER ENTER

CAUTIONThere is a risk that fraudulent telephone calls will be made if a third party discovers a personal identificationnumber (PIN) (verification code PIN or extension PIN) of the PBX.The cost of such calls will be billed to the owner/renter of the PBX.To protect the PBX from this kind of fraudulent use, we strongly recommend:a. Keeping PINs secret.b. Selecting complex, random PINs that cannot be easily guessed.c. Changing PINs frequently.

[123] Verification Code COS Number

[123]0001–1000

Location No.01–64

01

COS No.END

ENTER ENTER

[190] Main Processing (MPR) Software Version Reference

[190]Reference only

MPR VersionEND

ENTER



2.1.5 Timer Programming[200] Hold Recall Time

[200]0–240 s

60 s

TimeEND

(HOLD)ENTER ENTER

[201] Transfer Recall Time

[201]END

ENTER ENTER1–240 s

Time

60 s

[203] Intercept Time

[203]END

ENTER ENTER1–240 s

Time

40 s1 Day/2 Lunch3 Break/4 Night

Time No.Time No.

[204] Hot Line Waiting Time

[204]0–15 s

TimeEND

ENTER ENTER1 s

[205] Automatic Redial Repeat Times (KX-TDA100/KX-TDA200/KX-TDA600only)

[205]0–10

0

Number of TimesEND

ENTER ENTER

[207] Door Unlock Time

[207]2–7 s

5 s

TimeEND

ENTER ENTER


2.1.5 Timer Programming

[208] Call Duration Count Starting Time for LCOT

[208]0–60 s

0 s

TimeEND

ENTER ENTER

[209] DISA Delayed Answer Time

[209]0–30 s

5 s

TimeEND

ENTER ENTER

[210] DISA CO-to-CO Line Call Prolong Time

[210]0–7 min

TimeEND

ENTER ENTER3 min

[211] DISA Intercept Time

[211]0–60 s

TimeEND

ENTER ENTER40 s1 Day/2 Lunch3 Break/4 Night

Time No.Time No.

2.1.6 TRS/ARS Programming[300] TRS Override by System Speed Dialing

[300]Disable/ Enable

END(HOLD)


ENTER ENTER

[301] TRS Denied Code

ENTER ENTER

[301]2–6

Level No.Max. 16 digits

Denied Code001–100

Location No.END

CANCELNEXT

To the Next Location No.

To the Desired Location No.


2.1.6 TRS/ARS Programming

[302] TRS Exception Code

[302]2–6

Level No.Max. 16 digits

Exception Code

001–100

Location No.END

ENTER ENTER

[303] Special Carrier Access Code

[303]Max. 16 digits

Carrier Access CodeKX-TDA50: 01–20KX-TDA100: 01–20KX-TDA200: 01–20KX-TDA600: 001–100

Location No.END

ENTER ENTER

[304] Emergency Number

[304]Max. 32 digits

Emergency No.

01–10

Location No.END

ENTER ENTER

[320] ARS Mode

[320] Off/Idle Line/ All Access

ENDSELECT

ENTER ENTER

[321] ARS Leading Number

[321]0001–1000

Location No.

Max. 16 digits

Leading No.END

ENTER ENTER

[322] ARS Routing Plan Table Number

[322]0001–1000

Location No.KX-TDA50: 01–16KX-TDA100: 01–16KX-TDA200: 01–16KX-TDA600: 01–48

Plan Table No.END

ENTER ENTER

01



[325] ARS Exception Number

[325]001–200

Location No.

Max. 16 digits

Exception No.END

ENTER ENTER

[330] ARS Routing Plan Time Table


Plan Table No.

01–12/00–59

Hour:Minute

0 Sun/1 Mon/2 Tue/3 Wed/4 Thu/5 Fri/6 Sat

Day No.

END

1 TimeA/2 TimeB/3 TimeC/4 TimeD

ARS Time No.

ENTER

ENTER

[330]

AM/PM

SELECT

[331–346] ARS Routing Plan Table (1–16) (KX-TDA50/KX-TDA100/KX-TDA200 only)

[331–346] Day No.

KX-TDA50: 01–10/ None*KX-TDA100: 01–10/ None*KX-TDA200: 01–10/ None*

Carrier Table No.


ARS Time No.

END

1–6

Priority

ENTER

ENTER

0 Sun/1 Mon/2 Tue/3 Wed/4 Thu/5 Fri/6 Sat

• For programs [331] to [340], when Priority 1 is selected, the default value of Carrier Table No. is as follows:[331]: 01, [332]: 02, [333]: 03, [334]: 04, [335]: 05,[336]: 06, [337]: 07, [338]: 08, [339]: 09, [340]: 10

[347] ARS Routing Plan Table (1–48) (KX-TDA600 only)

01–48

Plan Table No.

END


ARS Time No.

ENTER

ENTER

[347]1–6

Priority

1–48/ None

Carrier Table No.



[350] ARS Carrier Name


Carrier Table No.Max. 20 characters

NameEND

ENTER ENTER

[351] ARS Trunk Group for Carrier Access

Disable/ Enable

SELECT[351] Carrier Table No. Trunk Group No.END

ENTER ENTER

SELECT



[352] ARS Removed Number of Digits for Carrier Access

[352] Carrier Table No.

0–15

Digits to RemoveEND


0

[353] ARS Carrier Access Code

[353] Carrier Table No.Max. 32 digits

Carrier Access CodeEND


2.1.7 CO Line Programming[400] LCOT CO Line Connection

ENTER ENTER

[400]No Connect/ Connect

END(HOLD)


CANCELNEXT

To the Next Port No.To the Desired Port No.

Slot No. Port No.


2.1.7 CO Line Programming

[401] LCOT CO Line Name

[401]Max. 20 characters

NameEND

ENTER ENTER3 digits

CO Line No.

[402] LCOT Trunk Group Number


3 digits

Trunk Group No.

ENDENTERENTER

CO Line No.

01

[409] LCOT CO Line Number Reference

[409]Reference only

Slot No. Port No. CO Line No.END

ENTER

[410] LCOT Dialing Mode

[410]DTMF/Pulse END

SELECT

ENTER ENTER

Slot No. Port No.

[411] LCOT Pulse Rate

[411]Low/High ENDSELECT

ENTER ENTER

Slot No. Port No.

[412] LCOT DTMF Minimum Duration

[412]80/160 ms ENDSELECT

ENTER ENTER

Slot No. Port No.



[413] LCOT CPC Signal Detection Time—Outgoing

[413]0: None/1: 6.5/2–113: (N–1)×8 ms

ENDENTER ENTER

Slot No. Port No. Mode No.

051 (400 ms)

[414] LCOT CPC Signal Detection Time—Incoming

[414]END

ENTER ENTER0: None/1: 6.5/2–113: (N–1)×8 ms

Slot No. Port No. Mode No.

051 (400 ms)

[416] LCOT Pause Time

[416] 1.5/2.5/ 3.5/4.5 s

ENDSELECT

ENTER ENTER

Slot No. Port No.

[417] LCOT Flash/Recall Time

[417]None/80/96/112/300/ 600/900/1200 ms/option

ENDSELECT

ENTER ENTER

Slot No. Port No.

[418] LCOT Disconnect Time

[418]0.5/ 1.5/2.0/4.0/12.0 s

ENDSELECT

ENTER ENTER

Slot No. Port No.

[450] DIL 1:1 Destination

[450]

END

ENTER

ENTER

Time No. Slot No. Port No. Destination No.1 Day/2 Lunch/3 Break/4 Night

1–5 digits



[451] DID Number

[451]0001–1000

Location No.Max. 32 digits

DID No.END

ENTER ENTER

[452] DID Name

[452]0001–1000

Location No.Max. 20 characters

NameEND

ENTER ENTER

[453] DID Destination

[453]0001–1000

Location No. Destination No.END

ENTER ENTER

1 Day/2 Lunch/3 Break/4 Night

Time No.1–5 digits

[471] Host PBX Access Code

[471] Trunk Group No.01–10

Location No.

Max.10 digits

Host PBX Access CodeEND

ENTER

ENTER


[472] Extension-to-CO Line Call Duration

[472] Trunk Group No.

01–60 min

TimeEND


10 min

[473] CO-to-CO Line Call Duration

[473] Trunk Group No.01–60 min

TimeEND


10 min



[475] DISA Silence Detection

ENTER ENTER


No Detect/Detect

ENDSELECT


[476] DISA Continuous Signal Detection


No Detect/ Detect

ENDSELECT


[477] DISA Cyclic Signal Detection


No Detect/ Detect

ENDSELECT


[490] Caller ID Signal Type

ENTER ENTER

[490] Slot No. FSK/FSK with Visual Caller ID/DTMF

SELECTEND



2.1.8 COS Programming[500] Trunk Group Number

[500]1 Day/2 Lunch/3 Break/4 Night

01–64

COS No.Time No.

Trunk Group No.

Disable/ EnableEND

(HOLD)


ENTER

ENTER

NEXT

To the Next

Trunk Group

No.

To the Next

COS No.

Page up


[501] TRS Level

[501]01–64

COS No.Time No.1–7

LevelEND

ENTER ENTER1 Day/2 Lunch/3 Break/4 Night 1

[502] CO Line Call Duration Limitation

[502]01–64

COS No.END Disable/

Enable

SELECT

ENTER ENTER

[503] Call Transfer to CO Line

[503]01–64

COS No.END Disable/

Enable

SELECT

ENTER ENTER

[504] Call Forwarding to CO Line

[504]01–64

COS No.END Disable/

Enable

SELECT

ENTER ENTER


2.1.8 COS Programming

[505] Executive Busy Override

[505]01–64

COS No.END Disable/

Enable

SELECT

ENTER ENTER

[506] Executive Busy Override Deny

[506]01–64

COS No.END Disable/

Enable

SELECT

ENTER ENTER

[507] DND Override

[507]01–64

COS No.END Disable/

Enable

SELECT

ENTER ENTER

[508] Account Code Mode

[508]01–64

COS No.END Option/

Forced

SELECT

ENTER ENTER

[509] TRS Level for System Speed Dialing

[509]01–64

COS No.1–7

TRS LevelEND

ENTER ENTER1

[510] TRS Level for Extension Dial Lock

[510]01–64

COS No.1–7 END

ENTER ENTER7

TRS Level

[511] Manager Assignment

[511]01–64

COS No.END Disable/Enable

SELECT

ENTER ENTER* Only COS No. 64 is set to Enable.



[512] Permission for Door Open Access

Disable/ Enable

SELECT[512]01–64

COS No.END

ENTER ENTER

[514] Time Service Manual Switching

[514]01–64

COS No.END Disable/

Enable

SELECT

ENTER ENTER

[515] Wireless XDP Parallel Mode for Paired Telephone

SELECT Disable/ Enable

[515]01–64

COS No.END

ENTER ENTER

[516] Programming Mode Limitation

COS No. 01–63=PersonalCOS No. 64=System&Personal

[516]01–64

COS No.END

SELECT

ENTER ENTER Disable/Personal/ System&Personal



2.1.9 Extension Programming[600] EXtra Device Port (XDP) Mode

[600] Slot No. Port No.

Off/OnEND

(HOLD)


ENTER ENTER

CANCELNEXT

To the Next Port No.

To the Desired Port No.

[601] Terminal Device Assignment

[601] Slot No. Port No.

KX-TDA100/KX-TDA200:Telephone/DSS Console 01–08/Voice Mail 1–(01–12)/Voice Mail 2–(01–12)/PC Console 1–8

ENDSELECT

ENTER ENTER

KX-TDA50:Telephone/DSS Console 01–04/Voice Mail 1–(01–04)/PC Console 1–2

KX-TDA600:Telephone/DSS Console 01–64/Voice Mail (1–8)–(01–12)/PC Console 1–8

See below

NoteWhen changing the type of a port for which one or more SDN buttons are set (except when changingbetween PC Console and Telephone), all SDN buttons customized for that device will be deleted(KX-TDA100/KX-TDA200/KX-TDA600 only).

[602] Class of Service

[602]01–64

01

COS No.END

ENTER ENTER

Extn. No.

[603] Extension User Group

[603] Extn. User Group No.

ENDENTER ENTER

Extn. No.


001


2.1.9 Extension Programming

[604] Extension Intercept Destination

[604]Max. 32 digits

Destination No.1 Day/2 Lunch/3 Break/4 Night

ENDENTER ENTER

Time No. Extn. No.

[605] Call Forwarding—No Answer Time

[605]0–120 s

TimeEND

ENTER ENTER15 s

Extn. No.

[606] CLIP Number

[606]Max. 16 digits

CLIP No.END

ENTER ENTER

Extn. No.

[620] Incoming Call Distribution Group Member

[620] Location No.Incoming Call

Distribution

Group No.

END

ENTER

ENTER

Extn. No.

001–128


[621] Incoming Call Distribution Group Delayed Ringing

[621] Location No.

END

Immediate/ 1–6 (rings)/ No ring

SELECT

ENTER

ENTER

Incoming Call

Distribution

Group No.

001–128




[622] Incoming Call Distribution Group Floating Extension Number

[622]END

ENTER ENTER

Extn. No.Incoming Call

Distribution

Group No.001–128

[623] Incoming Call Distribution Group Name

[623]Max. 20 characters

NameEND

ENTER ENTER

Incoming Call

Distribution

Group No.

001–128

[624] Incoming Call Distribution Group Distribution Method

[624]END Ring/UCD/

Priority Hunt

SELECT

ENTER ENTER

Incoming Call

Distribution

Group No.001–128

[625] Destination for Overflow Time Expiration


Max. 32 digits

Destination No.

END

ENTER

ENTER

Time No.Incoming Call

Distribution

Group No.001–128

[626] Overflow Time

[626] Overflow TimeEND

ENTER ENTER

Incoming Call

Distribution

Group No.001–128

( None/1–125)×10 s



[627] Destination When All Busy

[627]Max. 32 digits

Destination No.

END

ENTER

ENTER

Incoming Call

Distribution

Group No.1 Day/2 Lunch/3 Break/4 Night

Time No.

001–128

[628] Queuing Call Capacity

[628]0–30

Number in QueuingEND

ENTER ENTER

Incoming Call

Distribution

Group No.001–128

30

[629] Queuing Hurry-up Level

[629]None/1–30

Hurry-up LevelEND

ENTER ENTER

Incoming Call

Distribution

Group No.001–128

[630] Queuing Time Table


Table No.Time No.

END

ENTER

ENTER

Incoming Call

Distribution

Group No.

001–128

KX-TDA50: None/01–64KX-TDA100: None/01–64KX-TDA200: None/01–64KX-TDA600: None/001–128

[631] Sequences in Queuing Time Table

[631]01–16

* A number must be entered in place of the "N".

Location No.Table No.

END

None/Overflow/Disconnect/"N" × 5 s/Sequence "N"/OGM "N"

SELECT

ENTER

ENTER




[632] Maximum Number of Agents

[632]No Limitation/01–32

Number of AgentsEND

ENTER ENTER

Incoming Call

Distribution

Group No.

001–128

[640] Extension User Groups of a Paging Group

[640] Extn. User Group No.Paging Group No.

ENDNo/Yes

SELECT

ENTER

ENTER



KX-TDA50/KX-TDA100/KX-TDA200: Paging Group No. 01–31=Extn. User Group No. 001–031,Paging Group No. 32=All extension user groupsKX-TDA600: Paging Group No.= Extn. User Group No.

[641] External Pagers of a Paging Group

[641] External Pager No.Paging Group No.

END

SELECT

ENTER

ENTER

No/ YesKX-TDA50: 01–32KX-TDA100: 01–32KX-TDA200: 01–32KX-TDA600: 01–96

KX-TDA50: 1KX-TDA100: 1–2KX-TDA200: 1–2KX-TDA600: 1–2

[650] Extension User Groups of a Pickup Group

[650] Pickup Group No.

ENDSELECT

ENTER

ENTERNo/Yes

Extn. User Group No.

KX-TDA50/KX-TDA100/KX-TDA200: Pickup Group No. 01–32=Extn. User Group No. 001–032,Pickup Group No. 33–64=All extension user groupsKX-TDA600: Pickup Group No.=Extn. User Group No.





[660] VM Group Floating Extension Number

[660]KX-TDA50: 1KX-TDA100: 1–2KX-TDA200: 1–2KX-TDA600: 1–8

VM (DPT) Group No.END

ENTER ENTER

Extn. No. KX-TDA50: 500KX-TDA100: Group 1=500KX-TDA200: Group 1=500KX-TDA600: Group 1=500

[680] Idle Extension Hunting Type

[680] Hunting Group No.END Circular/

Terminate

SELECT


[681] Idle Extension Hunting Group Member

[681]01–16

Location No.Hunting Group No.

END

ENTER

ENTER

Extn. No.


[690] PS Registration

[690] PS No.

KX-TD7690

ENDENTER ENTER

To the PSoperationbelow

Extn. No.

Push power button for 2 seconds.

Push F3 key for 2 seconds.

C.Tone

KX-TDA50: 001–028KX-TDA100: 001–128KX-TDA200: 001–128KX-TDA600 (without EMEC): 001–256KX-TDA600 (with EMEC): 001–512

See below 1–4 digits

NotePlease refer to the Installation Manual for details about PS registration.



[691] PS Termination

[691] PS No.END

ENTER ENTER


See below

[692] Personal Identification Number (PIN) for PS Registration

[692]4 digits

PIN for PS Registration END

ENTER ENTER1234

[699] CS Status Reference

[699]END

Slot No.Reference only

CS Status

ENTER

Port No.

2.1.10 Resource/Interface Programming[700] External Pager Floating Extension Number

[KX-TDA100/KX-TDA200/KX-TDA600]

[700]1–2

Pager No.END

(HOLD)ENTER ENTER

CANCELNEXT

To the Next Pager No.To the Desired Pager No.

Extn. No.Pager 1: 600

[KX-TDA50]

[700]1

Pager No.END

(HOLD)ENTER ENTER

Extn. No.600


2.1.10 Resource/Interface Programming

[710] Music Source Selection for BGM (with the KX-TDA50)/BGM2 (with theKX-TDA100/KX-TDA200/KX-TDA600)

[710]END

External/ Internal1/ Internal2

ENTER ENTER


[711] Music on Hold

[711]ENDKX-TDA50: Tone/BGM

KX-TDA100: Tone/BGM1–2KX-TDA200: Tone/BGM1–2KX-TDA600: Tone/BGM1–2

Music Source No.

ENTER ENTER

[712] Music for Transfer

[712]END Hold Music/

Ring back

SELECT

ENTER ENTER

[720] Doorphone Call Destination[KX-TDA100/KX-TDA200/KX-TDA600]

[720]

END


Max. 32 digits

Slot No.1–3 1–4

Card No. and Port No.Time No.

Destination No.

ENTER

ENTER

[KX-TDA50]

[720]

END


Max. 32 digits

Slot No. Port No.Time No.

Destination No.

ENTER

ENTER

1–4


2.1.10 Resource/Interface Programming

[729] Doorphone Number Reference[KX-TDA100/KX-TDA200/KX-TDA600]

[729]END

Slot No.1–3 1–4 Reference only

Doorphone No.

ENTER

Card No. and Port No.

[KX-TDA50]

[729]END

Slot No.Reference only

Doorphone No.

ENTER

Port No.1–4

[730] Outgoing Message (OGM) Floating Extension Number

[730]END

Message No.

ENTER ENTER

Extn. No.

01–64 501–564

[731] Outgoing Message (OGM) Name

[731]END

Message No.Max. 20 characters

Name

ENTER ENTER01–64

[732] DISA Security Mode

[732]END None/

CO Line/All

SELECT

ENTER ENTER

2.1.11 SMDR & Maintenance Programming[800] RS-232C Parameter—New Line Code

[800]END

(HOLD)CR+LF/CR


1

Location

ENTER ENTER


2.1.11 SMDR & Maintenance Programming

[800] RS-232C Parameter—Baud Rate

[800]END2400/4800/9600/

19200/38400/57600/115200 bps

2

Location

ENTER ENTER

SELECT

[800] RS-232C Parameter—Word Length

[800]END7/ 8 bits

SELECT

3

Location

ENTER ENTER

[800] RS-232C Parameter—Parity Bit

[800]ENDNone/Mark/

Space/Even/Odd

SELECT

4

Location

ENTER ENTER

[800] RS-232C Parameter—Stop Bit Length

[800]END1 bit/2 bits

SELECT

5

Location

ENTER ENTER

[801] External Modem Control

[801]END

ENTER ENTER

Command No.1–5

[802] SMDR Page Length

[802]END4–99 lines

66

Page length

ENTER ENTER

[803] SMDR Skip Perforation

[803]END0–95 lines

Skip Perforation

ENTER ENTER0


2.1.11 SMDR & Maintenance Programming

[804] SMDR Outgoing Call Printing

[804]ENDNo print/

Print

SELECT

ENTER ENTER

[805] SMDR Incoming Call Printing

[805]ENDNo print/

Print

SELECT

ENTER ENTER

[810] Remote Programming

Disable/ Enable

SELECT[810]END

ENTER ENTER

[811] Modem Floating Extension Number

[811]END

ENTER ENTER

Extn. No.

599

[812] ISDN Remote Floating Extension Number (KX-TDA100/KX-TDA200/KX-TDA600 only)

[812]END

ENTER ENTER

Extn. No.

2.1.12 Card Programming[900] Slot Card Type Reference

[900]Reference only

Slot No. Card NameEND

(HOLD)ENTER


2.1.12 Card Programming

[901] Slot Card Deletion

[901]END

ENTER

Slot No. Delete

ENTER

To the Next Slot No.To the Desired Slot No.

CANCELNEXT

Confirming the deleting operation.

[902] Slot Card Reset

[902]END

Slot No. Reset

ENTER ENTERConfirming the resetting operation.

[910] OPB3 Option Card Type Reference (KX-TDA100/KX-TDA200/KX-TDA600 only)

[910]END

Slot No.

Reference only

Option Card Type

ENTER 1–3

Card No.

[911] OPB3 Option Card Deletion (KX-TDA100/KX-TDA200/KX-TDA600 only)

[911]END

Slot No.1–3

Card No. Delete

ENTER ENTERConfirming the deleting operation.


2.1.12 Card Programming

Section 3

Appendix


3.1 Revision History

3.1.1 KX-TDA100/KX-TDA200 PMPR Software File Version 3.2xxxChanged Contents

• 2.1.2 Maximum Values• [007] DSS Console Paired Telephone• [601] Terminal Device Assignment

3.1.2 KX-TDA100/KX-TDA200 PMPR Software File Version 5.0xxxChanged Contents

• 2.1.1 Programming Instructions• 2.1.2 Maximum Values• 2.1.9 Extension Programming

3.1.3 KX-TDA50 PSMPR Software File Version 4.0xxxChanged Contents

• 2.1.1 Programming Instructions• 2.1.2 Maximum Values

3.1.4 KX-TDA50 PSMPR Software File Version 5.0xxxChanged Contents

• 2.1.1 Programming Instructions• 2.1.5 Timer Programming• [451] DID Number• [452] DID Name• [453] DID Destination• 2.1.8 COS Programming• 2.1.10 Resource/Interface Programming


3.1.4 KX-TDA50 PSMPR Software File Version 5.0xxx

3.2 Feature Programming ReferencesAbsent Message

• [008] Absent Message

Feature Manual References1.1.1 Absent Message

Account Code Entry• [508] Account Code Mode

Feature Manual References1.1.2 Account Code Entry

ARS (Automatic Route Selection)• [320] ARS Mode• [321] ARS Leading Number• [322] ARS Routing Plan Table Number• [325] ARS Exception Number• [330] ARS Routing Plan Time Table• [331–346] ARS Routing Plan Table (1–16) (KX-TDA50/KX-TDA100/KX-TDA200 only)• [347] ARS Routing Plan Table (1–48) (KX-TDA600 only)• [350] ARS Carrier Name• [351] ARS Trunk Group for Carrier Access• [352] ARS Removed Number of Digits for Carrier Access• [353] ARS Carrier Access Code

Feature Manual References1.1.3 ARS (Automatic Route Selection)

Call Hold• [200] Hold Recall Time

Feature Manual References3.1.2 Call Hold

Call Pickup• [650] Extension User Groups of a Pickup Group

Feature Manual References3.1.6 Call Pickup


3.2 Feature Programming References

Call Transfer• [201] Transfer Recall Time• [503] Call Transfer to CO Line• [712] Music for Transfer

Feature Manual References3.1.8 Call Transfer

Caller ID• [001] System Speed Dialing Number• [002] System Speed Dialing Name• [490] Caller ID Signal Type

Feature Manual References3.1.1 Caller ID

CLI (Calling Line Identification) Distribution• [001] System Speed Dialing Number• [002] System Speed Dialing Name

Feature Manual References3.1.12 CLI (Calling Line Identification) Distribution

CLIP (Calling Line Identification Presentation)• [003] Extension Number• [606] CLIP Number

Feature Manual References3.1.13 CLIP (Calling Line Identification Presentation)

COS (Class of Service)• 2.1.8 COS Programming• [602] Class of Service

Feature Manual References3.1.20 COS (Class of Service)

CPC (Calling Party Control) Signal Detection• [413] LCOT CPC Signal Detection Time—Outgoing• [414] LCOT CPC Signal Detection Time—Incoming



Feature Manual References3.1.21 CPC (Calling Party Control) Signal Detection

CO Line Access• [400] LCOT CO Line Connection• [401] LCOT CO Line Name• [409] LCOT CO Line Number Reference• [500] Trunk Group Number

Feature Manual References3.1.14 CO Line Access

CO Line Call Limitation• [472] Extension-to-CO Line Call Duration• [473] CO-to-CO Line Call Duration• [502] CO Line Call Duration Limitation

Feature Manual References3.1.15 CO Line Call Limitation

Dial Mode Selection• [410] LCOT Dialing Mode• [411] LCOT Pulse Rate• [412] LCOT DTMF Minimum Duration

Feature Manual References4.1.2 Dial Mode Selection

DID (Direct Inward Dialing)• [451] DID Number• [452] DID Name• [453] DID Destination

Feature Manual References4.1.5 DID (Direct Inward Dialing)

DIL (Direct In Line)• [450] DIL 1:1 Destination



Feature Manual References4.1.6 DIL (Direct In Line)

DISA (Direct Inward System Access)• [209] DISA Delayed Answer Time• [210] DISA CO-to-CO Line Call Prolong Time• [211] DISA Intercept Time• [475] DISA Silence Detection• [476] DISA Continuous Signal Detection• [477] DISA Cyclic Signal Detection• [604] Extension Intercept Destination• [730] Outgoing Message (OGM) Floating Extension Number• [731] Outgoing Message (OGM) Name• [732] DISA Security Mode

Feature Manual References4.1.7 DISA (Direct Inward System Access)

DND (Do Not Disturb)• [507] DND Override

Feature Manual References4.1.9 DND (Do Not Disturb)

Door Open• [207] Door Unlock Time• [512] Permission for Door Open Access

Feature Manual References4.1.10 Door Open

Doorphone Call• [720] Doorphone Call Destination• [729] Doorphone Number Reference

Feature Manual References4.1.11 Doorphone Call

EFA (External Feature Access)• [417] LCOT Flash/Recall Time



Feature Manual References5.1.1 EFA (External Feature Access)

Emergency Call• [304] Emergency Number

Feature Manual References5.1.2 Emergency Call

Executive Busy Override• [505] Executive Busy Override• [506] Executive Busy Override Deny

Feature Manual References5.1.3 Executive Busy Override

Extension Dial Lock• [510] TRS Level for Extension Dial Lock

Feature Manual References5.1.4 Extension Dial Lock

Extension PIN (Personal Identification Number)• [005] Extension Personal Identification Number (PIN)

Feature Manual References5.1.6 Extension PIN (Personal Identification Number)

Extension Port Configuration• [007] DSS Console Paired Telephone• [600] EXtra Device Port (XDP) Mode

Feature Manual References5.1.7 Extension Port Configuration

Flash/Recall/Terminate• [418] LCOT Disconnect Time



Feature Manual References6.1.2 Flash/Recall/Terminate

Flexible Numbering/Fixed Numbering• [100] Flexible Numbering

Feature Manual References6.1.4 Flexible Numbering/Fixed Numbering

Floating Extension• [623] Incoming Call Distribution Group Name• [660] VM Group Floating Extension Number• [700] External Pager Floating Extension Number• [730] Outgoing Message (OGM) Floating Extension Number• [731] Outgoing Message (OGM) Name• [811] Modem Floating Extension Number• [812] ISDN Remote Floating Extension Number (KX-TDA100/KX-TDA200/KX-TDA600 only)

Feature Manual References6.1.5 Floating Extension

FWD (Call Forwarding)• [472] Extension-to-CO Line Call Duration• [473] CO-to-CO Line Call Duration• [504] Call Forwarding to CO Line• [605] Call Forwarding—No Answer Time

Feature Manual References6.1.6 FWD (Call Forwarding)

Host PBX Access Code (Access Code to the Telephone Company from a HostPBX)

• [471] Host PBX Access Code

Feature Manual References8.1.5 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)

Hot Line• [204] Hot Line Waiting Time



Feature Manual References8.1.6 Hot Line

ICD Group Features• [620] Incoming Call Distribution Group Member• [621] Incoming Call Distribution Group Delayed Ringing• [622] Incoming Call Distribution Group Floating Extension Number• [623] Incoming Call Distribution Group Name• [624] Incoming Call Distribution Group Distribution Method• [625] Destination for Overflow Time Expiration• [626] Overflow Time• [627] Destination When All Busy• [628] Queuing Call Capacity• [629] Queuing Hurry-up Level• [630] Queuing Time Table• [631] Sequences in Queuing Time Table• [632] Maximum Number of Agents

Feature Manual References9.1.1 ICD GROUP FEATURES

ICD Group Features—Group Call Distribution• [621] Incoming Call Distribution Group Delayed Ringing• [624] Incoming Call Distribution Group Distribution Method• [632] Maximum Number of Agents

Feature Manual References9.1.2 ICD Group Features—Group Call Distribution

ICD Group Features—Outside Destinations• [620] Incoming Call Distribution Group Member• [621] Incoming Call Distribution Group Delayed Ringing• [622] Incoming Call Distribution Group Floating Extension Number• [624] Incoming Call Distribution Group Distribution Method• [629] Queuing Hurry-up Level

Feature Manual References9.1.4 ICD Group Features—Outside Destinations

ICD Group Features—Overflow• [625] Destination for Overflow Time Expiration• [626] Overflow Time• [627] Destination When All Busy



• [628] Queuing Call Capacity• [632] Maximum Number of Agents

Feature Manual References9.1.5 ICD Group Features—Overflow

ICD Group Features—Queuing• [628] Queuing Call Capacity• [629] Queuing Hurry-up Level• [630] Queuing Time Table• [631] Sequences in Queuing Time Table• [632] Maximum Number of Agents

Feature Manual References9.1.6 ICD Group Features—Queuing

Idle Extension Hunting• [680] Idle Extension Hunting Type• [681] Idle Extension Hunting Group Member

Feature Manual References9.1.9 Idle Extension Hunting

Intercept Routing• [203] Intercept Time• [604] Extension Intercept Destination• [625] Destination for Overflow Time Expiration

Feature Manual References9.1.11 Intercept Routing

Intercept Routing—No Destination• [006] Operator Assignment

Feature Manual References9.1.12 Intercept Routing—No Destination

Intercom Call• [003] Extension Number• [004] Extension Name



Feature Manual References9.1.13 Intercom Call

Line Preference—Outgoing• [103] Idle Line Access (Local Access)• [500] Trunk Group Number

Feature Manual References10.1.3 Line Preference—Outgoing

Manager Features• [112] Manager Password• [511] Manager Assignment

Feature Manual References11.1.1 Manager Features

Music on Hold• [710] Music Source Selection for BGM (with the KX-TDA50)/BGM2 (with the KX-TDA100/KX-TDA200/

KX-TDA600)• [711] Music on Hold

Feature Manual References11.1.4 Music on Hold

OGM (Outgoing Message)• [631] Sequences in Queuing Time Table• [730] Outgoing Message (OGM) Floating Extension Number

Feature Manual References12.1.2 OGM (Outgoing Message)

Operator Features• [006] Operator Assignment

Feature Manual References12.1.5 Operator Features



Paging• [640] Extension User Groups of a Paging Group• [641] External Pagers of a Paging Group

Feature Manual References13.1.1 Paging

Paralleled Telephone• [600] EXtra Device Port (XDP) Mode

Feature Manual References13.1.2 Paralleled Telephone

Pause Insertion• [416] LCOT Pause Time

Feature Manual References13.1.4 Pause Insertion

PC Console/PC Phone• [601] Terminal Device Assignment

Feature Manual References13.1.5 PC Console/PC Phone

Private Network Features• [453] DID Destination• [500] Trunk Group Number

Feature Manual References13.1.13 PRIVATE NETWORK FEATURES

Private Network Features—NDSS (Network Direct Station Selection)• [511] Manager Assignment

Feature Manual References13.1.15 Private Network Features—NDSS (Network Direct Station Selection)



Private Network Features—PS Roaming by Network ICD Group• [620] Incoming Call Distribution Group Member• [622] Incoming Call Distribution Group Floating Extension Number• [624] Incoming Call Distribution Group Distribution Method

Feature Manual References13.1.17 Private Network Features—PS Roaming by Network ICD Group

Private Network Features—QSIG—CLIP/COLP (Calling/Connected LineIdentification Presentation) and CNIP/CONP (Calling/Connected NameIdentification Presentation)

• [003] Extension Number• [004] Extension Name

Feature Manual References13.1.21 Private Network Features—QSIG—CLIP/COLP (Calling/Connected Line Identification Presentation)and CNIP/CONP (Calling/Connected Name Identification Presentation)

PS Connection• [690] PS Registration• [691] PS Termination• [692] Personal Identification Number (PIN) for PS Registration

Feature Manual References13.1.24 PS (Portable Station)

PS Directory• [001] System Speed Dialing Number• [002] System Speed Dialing Name• [004] Extension Name

Feature Manual References13.1.26 PS—Directory

PS Ring Group• [620] Incoming Call Distribution Group Member

Feature Manual References13.1.28 PS—Ring Group



PT Programming• 2.1 PT Programming• [516] Programming Mode Limitation

Feature Manual References13.1.29 PT Programming

Redial, Last Number• [205] Automatic Redial Repeat Times (KX-TDA100/KX-TDA200/KX-TDA600 only)

Feature Manual References15.1.1 Redial, Last Number

SMDR (Station Message Detail Recording)• [800] RS-232C Parameter—New Line Code• [800] RS-232C Parameter—Baud Rate• [800] RS-232C Parameter—Word Length• [800] RS-232C Parameter—Parity Bit• [800] RS-232C Parameter—Stop Bit Length• [802] SMDR Page Length• [803] SMDR Skip Perforation• [804] SMDR Outgoing Call Printing• [805] SMDR Incoming Call Printing

Feature Manual References16.1.1 SMDR (Station Message Detail Recording)

Special Carrier Access Code• [303] Special Carrier Access Code

Feature Manual References16.1.2 Special Carrier Access Code

Speed Dialing, System• [001] System Speed Dialing Number• [002] System Speed Dialing Name• [509] TRS Level for System Speed Dialing

Feature Manual References16.1.4 Speed Dialing, System



TAFAS (Trunk Answer From Any Station)• [700] External Pager Floating Extension Number

Feature Manual References17.1.2 TAFAS (Trunk Answer From Any Station)

Tenant Service• [001] System Speed Dialing Number• [006] Operator Assignment• [320] ARS Mode• [711] Music on Hold

Feature Manual References17.1.3 Tenant Service

Time Service• [101] Time Service Switching Mode• [102] Time Service Starting Time• [514] Time Service Manual Switching

Feature Manual References17.1.5 Time Service

TRS (Toll Restriction)• [300] TRS Override by System Speed Dialing• [301] TRS Denied Code• [302] TRS Exception Code• [501] TRS Level• [509] TRS Level for System Speed Dialing• [602] Class of Service

Feature Manual References17.1.6 TRS (Toll Restriction)

Upgrading the Software• [190] Main Processing (MPR) Software Version Reference

Feature Manual References18.1.1 Upgrading the Software



Verification Code Entry• [120] Verification Code• [121] Verification Code Name• [122] Verification Code Personal Identification Number (PIN)• [123] Verification Code COS Number

Feature Manual References19.1.1 Verification Code Entry

Virtual PS• [690] PS Registration

Feature Manual References19.1.2 Virtual PS

Voice Mail (VM) Group• [601] Terminal Device Assignment• [660] VM Group Floating Extension Number

Feature Manual References19.1.3 Voice Mail (VM) Group

Voice Mail DPT (Digital) Integration• [201] Transfer Recall Time

Feature Manual References19.1.4 Voice Mail DPT (Digital) Integration

Walking COS• [005] Extension Personal Identification Number (PIN)

Feature Manual References20.1.1 Walking COS

Walking Extension• [007] DSS Console Paired Telephone

Feature Manual References20.1.2 Walking Extension



Wireless XDP Parallel Mode• [515] Wireless XDP Parallel Mode for Paired Telephone

Feature Manual References20.1.4 Wireless XDP Parallel Mode



One Panasonic Way, Secaucus, New Jersey 07094

http://www.panasonic.com/csd

Copyright:

This material is copyrighted by Panasonic System Networks Co., Ltd., and may be reproduced for internal

use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic

System Networks Co., Ltd.

© Panasonic System Networks Co., Ltd. 2010

PSQX3823TA KK0206ET6110

http://www.panasonic.com/csd

PT Programming Manual - DataComdatacomfirst.com/documents/302_TDA_PTPM_10-11[1].pdf · Introduction...

Documents

Transcript of PT Programming Manual - DataComdatacomfirst.com/documents/302_TDA_PTPM_10-11[1].pdf · Introduction...