1 | P a g e

BIDDING DOCUMENTFor

Procurement of the work of

Pilgrimage Rejuvenation & Spiritual Augmentation Drive” (PRASAD) forVelankanni in Tamilnadu. Works comprising;

Providing Paver Block Road, Construction of Toilet Block, andProviding Improvement works to Mariamman Koil Kulam & Street

Lighting in Velankanni in Nagapattinam District(Single Stage Two Cover System)

Volume 2- Price BID

Issued on :Invitation for Bids No. :Package No. :

Employer:The Chairman & Managing Director,

Tamil Nadu Tourism Development Corporation Limited,Tamil Nadu Tourism Complex,

2, Wallajah Road, Chennai – 600 002,Tamil Nadu

Telephone: +91- 44- 25333851-85 Email: ttdc@vsnl.com,

2 | P a g e

Letter of Price Bid

Contract Package No. :

Invitation Bid No. : Date:

Title of contract : Pilgrimage Rejuvenation & Spiritual Augmentation Drive” (PRASAD) forVelankanni in Tamilnadu. Providing Paver Block Road, Construction ofToilet Block, and Providing Improvement works to Mariamman- KoilKulam & Street Lighting

To:………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

We, the undersigned, declare that:

a) We have examined and have no reservations to the Bidding Documents, including Addenda issuedin accordance with Instructions to Bidders (ITB) 8;

b) We offer to execute in conformity with the Bidding Documents the following Works:

c) The total price of our Bid, excluding any discounts offered in item (d) below is:

d) The discounts offered and the methodology for their application is:

e) Our Bid shall be valid for a period of . . . . . days from the date fixed for the bid submission deadlinein accordance with the Bidding Documents, and it shall remain binding upon us and may beaccepted at any time before the expiration of that period;

f) If our Bid is accepted, we commit to obtain a performance security in accordance with the BiddingDocuments;

g) We have paid, or will pay the following commissions, gratuities, or fees with respect to the biddingprocess or execution of the Contract: **

Name of Recipient Address Reason Amount

……………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………….

h) We understand that this bid, together with your written acceptance thereof included in yournotification of award, shall constitute a binding contract between us, until a formal contract isprepared and executed; and

3 | P a g e

i) We understand that you are not bound to accept the lowest evaluated bid or any other bid that youmay receive.

j) We agree to permit Government of India or its representative to inspect our accounts and recordsand other documents relating to the bid submission and to have them audited by auditors appointedby GOI.

k) If awarded the contract, the person named below shall act as Contractor’s Representative.

Name ……………………………………………………………………………………………………….In the capacity of ……………………………………………………………………………………………Signed ………………………………………………………………………………………………………Duly authorized to sign the Bid for and on behalf of ……………………………………………………….Date …………………………………………………………………………………………………………

** If none has been paid or is to be paid, indicate “none”

4 | P a g e

Name of Work:-Pilgrimage Rejuvenation & Spiritual Augmentation Drive” (PRASAD) for Velankanni inTamilnadu

Invitation of Bid No:

Contract Package No: Development of Velankanni under PRASAD Scheme (Pilgrimage Rejuvenation and Spiritual Augmentation Drive)

Name of Bidder &Address

Schedule A

Sl.No. Qty Description of Work TNDSS

No

Rate in Rupees Unit inFigure andin words

Amount inRs.In

FigureIn Words

1 2909.00 Earth work excavation for foundation in all soilsand sub-soils and to full depth as may be directedexcept in rock requiring blasting inclusive ofshoring shuttering, bailing out water wherevernecessary and depositing the surplus earthwithin the compound in places shown by thedepartmental officers with an initial lead of 10mts. and initial lift of 2 mts. and clearing andlevelling the site, etc., complete complying withstandard specification.

23 &24

V, VIS2

-1M³

(One CubicMetre)

-

2 490.00 Refilling with excavated earth other than sandwith an initial head load of 100 mts. anddepositing the earth as shown by thedepartmental officers in layers of not more than15 cm thick well rammed, watered andconsolidated etc. complete complying withstandard specification

24 &25 V,

VIS2

-1M³

(One CubicMetre)

-

5 | P a g e

3 309.00 Supplying and filling in foundation, basement,etc. with filling sand in layers of not more than15 cm thick well watered, rammed andconsolidated etc. complete complying withstandard specification and as directed by thedepartmental officers.

24 &25 V,

VIS2

-1M³

(One CubicMetre)

-

4 1362.00 Supply delivery and filling of quarry rubbish inlayer of not more than 15cm thick includingwatering with all layers and consolidationcomplying with standard specificationsincluding cost and conveyance of all materialsand labour charges etc., complete

24 &25 V,

VIS2

-1M³

(One CubicMetre)

-

5 258.00 Supply delivery and filling of gravel in layer ofnot more than 15cm thick including wateringwith all layers and consolidation complying withstandard specifications including cost andconveyance of all materials and labour chargesetc., complete

37 B -1M³

(One CubicMetre)

-

6 3415.00 Providing and laying of 80mm thick highstrength type conforming IS 15658-2006 ofrubberized interlocking paver block in requiredsizes of minimum compressive strength of 40N/mm2 in uniform shape of approved make tobe laid in flurrying bone pattern with approvednon-sticking surface in the top and the rateincluding levelling the base preparation of subbase with stone dust cushion 100mm thick,laying out the pavement cut the pieces to fit theedge, vibrating the pavers, sweepingtransporting, loading unloading and laying ofpaver block as per standard specification.-10Sq.m

SS -1M²(One

SquareMetre)

-

6 | P a g e

7 710.00 Cement Concrete 1:4:8 (One part of cement,four part of fine aggregate and eight part ofcourse aggregate) mix using 40mm HBG ISSmetal from approved quarry including cost andconveyance of all materials to site and labourcharges, including dewatering if foundnecessary and laid in layers of not more than15cm thick and compacted etc., completecomplying with standard specifications asdirected by the departmental officers

28V, VIS2

(SS.A)VII

-1M³

(One CubicMetre)

-

8 0.00 Supplying and erecting cantering for sides andsoffits including necessary supports andstrutting upto 3.29 M height for plane surfacesas detailed below in all floors with all crossbracings using Mild Steel sheets of size 90 x 60cm and 10 BG stiffened with welded Mild Steelangle of size 25mm x 25mm x 3 mm forboarding laid over silver oak joists of size 10cmx 6.50 cm spaced at above 90 cm centre to centreand supported by casurina props of 10cm to 13cm dia spaced at not more than 75 cm centre tocentre etc. complete complying with thestandard specification. (Payment for canteringshall be given after the concrete is laid)

30(S)86 86A V, VI(S3)VII

-

a) 888.00 Footing and Plinth -1M²(One

SquareMetre)

-

b) 436.00 Cantering for soffits of RCC slabs -1M²(One

SquareMetre)

-

7 | P a g e

c) 2842.00 For vertical Surfaces -1M²(One

SquareMetre)

-

d) 310.00 Rate for RCC Square or rectangular column andwall top & bottom slab of boxing sill slabsunshade with necessary facia etc., completecomplying with standard specifications.

-1M²(One

SquareMetre)

-

9 Providing and laying in position, StandardisedConcrete Mix M-25 Grade in accordance withIS:456-2000, using 20mm and downgraded hardbroken granite stone jelly for all RCC items ofworks with minimum cement content of 350kg/mᶾ and maximum water cement ratio of 0.50,including admixture (plasticiser / superplasticiser) in recommended proportions as perIS:9103 to accelerate, retard setting of concrete,improve workability without impairing strengthand durability with about (5.0 cu.m.) 7730 kg.Of 20mm machine crushed stone jelly and withabout (3.3 cu.m.) 5156 kg. Of 10-12mm machinecrushed stone jelly and with about (4.79 cu.m.)7670 kg. of sand, but excluding cost ofreinforcement grill and fabricating charges,cantering and shuttering and also includinglaying, vibrating with mechanical vibrators,finishing, curing, etc. and providing fixtures likefan clamps in the RCC floor/ roof slabs wherevernecessary without claiming extra, etc., completecomplying with standard specification and asdirected by the departmental officers. Thecoarse and fine aggregates to be used shouldcomply with the requirements of IS Standards.(No separate payment will be made by theDepartment for the excess usage of materials).

30 -

8 | P a g e

a) 386.00 Foundation and Basement -1M³

(One CubicMetre)

-

b) 69.00 For Ground Floor -1M³

(One CubicMetre)

-

c) 1208.00 Add the basic rate for works above 1.50m depthand upto 4.5m depth below ground level

-1M³

(One CubicMetre)

-

c) 10.00 For First Floor -1M³

(One CubicMetre)

-

10 1255.00 Supplying, fabricating and placing in positionMild Steel / Ribbed Tor Steel grills for all RCCworks as per design given including cost of steeland G.I. binding wire in all floors etc. completecomplying with standard specification.(Contractor has to make his own arrangementsfor the supply of steel and binding wire)

SS 86& 86 AV, VI(S3)(S6)VII

- 1Qtl(One

Quintal)-

11 Brick work in Cement Mortar 1:5 using bestquality of Second Class Ground MouldedChamber Burnt Bricks 9" x 4-3/8" x 2-3/4" forfoundation and basement including curing, etc.,complete complying with standard specification.

31 -

a) 76.00 Up to Plinth Level -1M³

(One CubicMetre)

-

9 | P a g e

b) 180.00 In Super Structure Ground Floor -1M³

(One CubicMetre)

-

c) 70.00 Brick work in Cement Mortar 1:3 using bestquality of Second Class Ground MouldedChamber Burnt Bricks 9" x 4-3/8" x 2-3/4" forfoundation and basement including curing, etc.,complete complying with standard specificationin Partition Wall

-1M²(One

SquareMetre)

-

12 1635.00 Plastering with Cement Mortar 1:5 (One cementand Five sand), 12mm thick in all floorsincluding curing etc. complete complying withstandard specification and as directed by thedepartmental officers.

61 V,VI

(S4) 3

-1M²(One

SquareMetre)

-

13 368.00 Special ceiling plastering and finishing theexposed surface of all RCC items of work suchas slabs, beams, sunshades, facia, canopy slab,staircase waist slab, landing slab etc., withCement Mortar 1:3 (One Cement and ThreeSand) 10mm thick including hacking thesurfaces, providing cement mortar nosing,beading for sunshades, staircases, steps, landingslabs and curing, etc., in all floors complyingwith standard specification and as directed bythe departmental officers

56 &57

-1M²(One

SquareMetre)

-

14 35.00 Damp proof course with Cement Mortar 1:4(One Cement and Four sand) 12mm thick mixedwith best approved quality water proofingcompound conforming to Indian Standardspecification as specified by the departmentalofficers at 2% by weight of cement used andfinishing, curing etc. complete complying withstandard specification.

S38(S6) &V, VI

-1M²(One

SquareMetre)

-

10 | P a g e

15 27.00 Weathering course in brick jelly lime concreteusing broken brick jelly of size 20mm uniformgauge in pure slaked lime (no sand to be used) tothe proportion of brick jelly to lime being32:12.5 by volume and laid over the RCC roofslab in a single layer of required slope andfinished by beating the concrete with woodenbeaters of approved pattern, keeping the surfaceconstantly wet by sprinkling lime jaggery water,etc., complete as per standard specification andas directed by the departmental officers.

51(10-1)V, VI(S5)VII, 3

-1M²(One

SquareMetre)

-

16 219.00 Finishing the top of roof with one course ofmachine pressed tiles of size 230mm x 230mmx 20mm of approved quality set in CementMortar 1:3 (One Cement and Three Sand) 12mmthick mixed with water proofing compoundconforming to ISS at 2% by weight of cementused and the joints pointed neatly to full depth oftiles with the same cement mortar mixed withred oxide and water proofing compoundincluding curing etc., complete complying withstandard specification and as directed by thedepartmental officers

44 HV, VI(S5A)VII, 3

-1M²(One

SquareMetre)

-

17 406.00 Dadooing walls with following best approvedquality, white / colour glazed tile of size (300mmx 450mm x 6mm) set in Cement Mortar 1:2 (OneCement and Two sand) 10mm thick and pointingthe joints with white cement mixed withcolouring pigments at the rate of 0.40 Kg. / sq.m.Neatly in all floors, curing, etc., complying withstandard specification and as directed by thedepartmental officers.

39 A -1M²(One

SquareMetre)

-

11 | P a g e

18 185.00 Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of20mm thick of approved quality and colour laidin Cement Mortar 1:3 (One Cement and Threesand) 20mm thick and pointed with whitecement mixed with colouring pigment at the rateof 0.40 Kg. / sq.m., curing, etc., completecomplying with standard specification and asdirected by the departmental officers. (Themake and brand of the tiles should be gotapproved by Executive Engineer before use onworks)

39 A -1M²(One

SquareMetre)

-

19 4.00 Flooring with following ceramic tiles of size 305x 305 x 6 mm laid over 20 mm thick cementmortar 1:3 (One Cement and Three Sand) basemortar over the existing slab / floor includingcutting the tiles to the required size with specialcutter wherever necessary, laying in position andpointing with white cement mixed withcolouring pigment at the rate of 0.3 Kg. / sq.m.etc., complete complying with standardspecification. (The make and brand of the tilesshould be got approved by Executive Engineerbefore use on works)

39 A -1M²(One

SquareMetre)

-

20 13.00 Paving the floor with best quality Vitrified Tilesof size 600 x 600 x 8mm of approved colour,shade and quality laid in cement mortar 1:3 (onecement and three sand) 20mm thick in all floorsand the top pointed with the white cement mixedsame colour pigments etc., complete complyingwith standard specification. (The make andbrand of the tiles should be got approved byExecutive Engineer before use on works)

SS -1M²(One

SquareMetre)

-

12 | P a g e

21 86.00 Providing and fixing of Decorative pressed tilesof 12 mm thick of all sizes and shape ofapproved quality and colour of approved make,quality and colour with pointed neatly withcolour cement at the rate of 0.40kg/m2 laidwithout any air gap in the tiles neatly and fixingin position as per standard specifications and asdirected by the departmental officer. The colour& quality of tiles should be got approved byMunicipal Engineer before use on work

44 HV, VI(S5A)VII, 3

-1M²(One

SquareMetre)

-

22 31.00 Providing and fixing of Solid PVC doorshutters using 19 Gauge 19mm MS squaretubes for styles and outer frames. 15mm MSsquare tubes for top, lock and bottom rails. Thesteel tubes shall be covered with 5mmthick solid PVC sheets. Shutter using 5mmthick solid PVC sheets for panelling shallrigidly fixed in position includingnecessary furniture and fittings. The overallsize of styles shall be 50mm x 30mm. Theoverall size of top rail, Lock rail and bottomrail shall be 75mm x 30mm. The overall size offrames shall be 50mm x 45mm, with suitablerabate for housing the shutter. a) Solid panelPVC door with frame

74 -1M²(One

SquareMetre)

-

13 | P a g e

23 9.00 Supplying, fabrication and fixing in position ofaluminium Powder Coating matt finishALUMINIUM DOUBLE LEAF DOOR of size1.80m x 2.10m half glazed and half plb boardfully 12mm thick board fully 5.5mm thickglazed door using rectangular aluminium boxsection of following sizes of frames and shutterswith necessary accessories such as rubberbeading, aluminium clips, best double actionfloor spring door closer, handle locks and glassincluding all materials labour and powerconsumption charges required for fabrication ifnecessary chopping dismantling makingnecessary holes in RCC columns, beams ormasonary wherever necessary with power drillto the extent required and made good to theoriginal conditions after fixing etc., complete.The aluminium surface must be anodised withmatt finish under electrically controlledcondition in accordance with IS specifications1868/1962 of anodic film thickness of not lessthan 15 microns for all sections. All thematerials should be got approved by theEngineer in charge before fixing as directed

81 A -1M²(One

SquareMetre)

-

24 10.00 Supplying and erecting pull and push typerolling shutter with ISI make of approved sizeand section using 18 GI sheet. The shutter shallbe painted with one coat of red oxide primer andthe rate is inclusive of hood coverstransportation charges etc.,

84-A -1M²(One

SquareMetre)

-

14 | P a g e

25 425.00 Supplying and painting the walls with two coatsof cement paint over one coat of cement primeras instructed by the departmental officersincluding preparation of surface curing, etc.,complete in all floors complying with standardspecifications (The colour and shade of thecement paint shall be got approved by theExecutive Engineer before use of work).

65-A -1M²(One

SquareMetre)

-

26 1570.00 Painting two coats with Plastic Emulsion paintof approved quality colour over new wallsurfaces including cleaning and preparing thesurface, scaffolding etc., complete.

SS -1M²(One

SquareMetre)

-

27 11.00 Supplying and fixing 50mm thick (both sidepolished) marble slabs for shelves (4 tier) withneat finishing. The rate inclusive of cost of slaband labour charges for fixing etc., complete asdirected by the departmental officer.

39-A -1M²(One

SquareMetre)

-

15 | P a g e

28 11.00 Supplying and fixing in position Indian WaterCloset (Oriya type) of size 580 x 440mm colourglazed earthen ware of approved quality andbrand with "P" or "S" trap conforming to BISwith sand cushion and forming flooring alroundthe closet using 40mm broken brick jelly in limeconcrete 1:2:5 (One lime, Two sand and Fivebrick jelly) 100mm thick and finishing the top tothe required slope and including givingnecessary connection to CI soil pipes (includingthe cost of 100mm dia CI pipe for a length of600mm) by dismantling brick masonry wall /reinforced cement concrete roof / floor slab andmaking good the dismantled portion to theoriginal condition with leakages etc., completecomplying with standard specifications and asdirected by the departmental officers. (Thewater closet should be got approved by theExecutive Engineer before use on works).

102-A - Each-

29 6.00 Supplying and fixing in position white / colourglazed European Water Closet of best qualityand approved make with 100 mm "P" or "S" trapconnecting with CI pipe of 100mm dia / PVCpipe of 110mm dia, double flapped rigid PVCblack seat and seat cover with CP brass hingesincluding cost of white cement, cement forpacking, spun yarn, teak wood plugs, brassscrews, etc., including supplying and fixing 10litres capacity PVC / 12.5 litres capacity porcelinlow level flushing tank with a pair of CIbrackets, etc., complete with all fittings such as15mm brass ball valve with polythene float withbrass handle, union, coupling connected bymeans of 40mm white PVC flush hand using

102-A - Each-

16 | P a g e

Indian adopter joint including all internalfittings.

30 16.00 Supply and fixing in position of best Indianmake white / colour glazed earthenware lippedmouth flat back urinal of best quality andapproved make of size 430mm x 260mm x350mm with GI pipe, 32mm dia bell mouth PVCconnection and waste pipe, 15mm dia GI pipe ofrequired length, 15mm dia GM wheel valve,15mm dia brass nipple 2 Nos., and fixing theurinals in position with necessary TW plugs,clamps, screws, etc., including dismantlingmasnory and re-doing the same to the originalcondition, etc., including painting the pipe withtwo coats of best quality approved syntheticenamel paint over one coat of red oxide primerand checked without any leakage etc. completecomplying with standard specifications and asdirected by the departmental officers. (Theurinal should be got approved by the ExecutiveEngineer before use on works.)

102-A - Each-

17 | P a g e

31 9.00 Supplying and fixing in position best quality andapproved make Indian made white / colourglazed earthenware wash hand basin of size 550x 400mm (with pedestal / without pedestal) witha pair of cast iron brackets, including cost 15mmdia brass CP pillar tap, 32mm dia "B" class GIwaste pipe with rubber plug and chain, 15mmdia GM wheel valve, 15mm brass nipple, 15mmdia nylone connection, 32mm dia CP brass wastecoupling including fixing of wash basin using CIbrackets on to the wall in position with TW plugsand screws, rubber washers, white lead andgiving necessary water supply connection andpainting the brackets with two coat of paintingover a priming coat of anti-corrosive paintincluding testing for leakages etc., completecomplying with standard specification and asdirected by the departmental officers. (The washhand basin and specials should be got approvedby the Executive Engineer before use on works).

102 - Each-

32 25.00 Supplying and fixing in position 15mm dia brassCP screw down tap / Pillar tap (heavy duty) ofapproved make conforming to BISspecifications and quality including cost ofshellac, thread, etc., complete complying withstandard specification and including cutting andthreading wherever necessary. (Taps should begot approved by the Executive Engineer beforeuse on the works)

102-A - Each-

18 | P a g e

33 4.00 Supplying and fixing in position Indian makebevelled edge mirror of approved quality andbrand PVC / Fibre Glass framed 600 x 450 x5.5mm thick mirror, shelf type with hard boardbacking of approved colour fixed with brassscrews, rawl plug, etc., complete complyingwith standard specification. (The mirror shouldbe got approved by the Executive Engineerbefore use on woks)

102-A - Each-

34 4.00 Supplying and fixing approved best quality brassCP towel rail 600mm long and 20mm dia withbrackets of same materials including cost of teakwood plugs and CP screws, etc., completecomplying with standard specifications. (Thetower rail should be got approved by ExecutiveEngineer before use on works).

102-A - Each-

35 8.00 Supplying and fixing best approved best qualitybrass CP soap tray of size 150 x 150mmincluding cost of teak wood plugs, brass screws,etc., complete complying with standardspecifications. (The soap tray should be gotapproved by Executive Engineer before use onworks).

102-A - Each-

36 20.00 Drilling of bore wells of size 4" (100 mm) to 5"(125mm) dia in Sedimentary formation usinghand bore sets including insertion of casingpipes and removal of casing pipes etc., includingsupplying and packing of pebbles andconveyance of hand Bore set including loadingand unloading.Drilling of 140/150 mm pilot boreUpto 20 mt. Depth ending below ground level

26-A - 1 RM(One

RunningMetre)

-

37 15.00 Providing and Fixing PVC CASING PIPE ASPER IS 12818 / 2010 with Excise Duty 150 mmdia CS

102-A - 1 RM(One

RunningMetre)

-

19 | P a g e

38 1.00 Providing and fixing PVC SPECIALS AS PERIS 10124/1982 Part-II 140 mm dia pipe end cap

102-A - Each-

39 Providing and fixing HDPE PIPES - PE 100 ASPER IS 4984/1995 of the following dia withnecessary TW clamps, plugs, shoes, bends, otherlamps, screws nails etc., complete complyingwith standard specifications. The rate isinclusive of cost of removable iron gratings ofappropriate size. The size of Teak wood plugsused is 150 x 25mm in front & 200 x 75mm inrear (wall side) with a depth of 110mm. Thepipe is to be fixed by means of U clamps at thecentre of pipes to be fixed

102-A -

a) 120.00 For 110mm dia HDPE pipes - 1 RM(One

RunningMetre)

-

b) 80.00 For 75mm dia HDPE pipes - 1 RM(One

RunningMetre)

-

40 10.00 Supplying and fixing position CI Nahani Trap /Floor Trap of the following sizes with beststainless steel gratings of approved brand andquality, fixed over a bed of brick jelly limeconcrete 1:2:5 (One part of lime, two part ofsand and five part of 40mm gauge brick jelly)and finished with Cement Mortar 1:3 (OneCement, Three sand) including dismantlingmasonry works wherever found necessary andmaking good the dismantled portions to theoriginal condition and giving connection to the

102-A - Each-

20 | P a g e

CI / PVC pipes, etc., complete complying withstandard specification. (The Nahani Trap shouldbe got approved by the Executive Engineerbefore use on works)

41 20.00 Supplying and fixing in position 150 x 100mm"P" or "S" stoneware gully trap 'A' grade with CIdouble gratings of size 150 x 150mm and 230 x230mm at bottom and top respectively withnecessary earth work excavation laid over a bedof brick jelly cement concrete 1:3:6 (Onecement, Three sand and Six broken brick jelly)150mm thick using 40mm size broken brick jellyincluding necessary brick work and plasteringincluding dismantling masonry wherevernecessary and re-doing the damaged portions tothe original conditions using cement concrete1:3:6 using 20mm stone jelly for fixing the gullytrap and giving connections to stoneware sewerline etc., complete complying with standardspecifications. [Earth work excavation, brickwork, plastering shall be measured and paidseparately]. The stoneware gully trap should begot approved by the Executive Engineer beforeuse on works.

102-A - Each-

42 1.00 Supply and delivery of Single phaseSubmersible Pump set as per IS 8034 1 HP15X70 LPM including PVC INSULATED ANDSHEATHED 3 CORE FLAT TYPE COPPERCABLE CONFORMING TO IS 694/1990WITHOUT PANEL BOARD including allcharges etc. complete as per standardspecification.

98 - Each-

43 1.00 Supply and delivery of Single phase Panel Board1HP with two level guard and auto startincluding all charges etc. complete as perstandard specification.

98 - Each-

21 | P a g e

44 1.00 Labour charges for the erection of submersiblepump set 5HP in bore well/open well includingfixing and jointing submersible cable withproper clamps upto the starter to required depthand also fixing of riser pipes to the requireddepth valves erection clamps, pressure gaugesupto the exterior wall of pump room and erectionof panel board consisting of TPICN switchesstarter, voltmeter, Ammeter, three pilot(indicating) lamps capacitor single phasingpreventer, water level guard and laying andjointing the cables and twin earthing as per IErules etc., complete and testing the pump set andtrail run for 10 days

98 - Each-

45 85.00 Supply and run of 2 of 6 sqmm PVC insulatedSC unsheathed Cu. Conductor of 1100 V gradeon 7/20 GI bearer wire for SERVICECONNCETIONS MAINS.(SD-62)

102-A - 1 RM(One

RunningMetre)

-

46 70.00 Supply and run of 2 of 1.5 Sq.mm PVC insulatedSC unsheathed Cu. Conductor of 1100 V gradeon 7/20 GI bearer wire for SERVICECONNCETIONS MAINS.(SD-62)

102-A - 1 RM(One

RunningMetre)

-

47 24.00 Wiring with 2 x 1.5 Sq.mm (22/0.3)PVCinsulated SC unsheated copper conductor cableof 1100 V grade in suitable heavy gauge MSconduit pipe concealed in wall and ceiling withMS accessories with switch box with 5A FTswitch Two way in flush with sall and coveredwith 3mm thick hylem sheet for MS switch boxwith continuous earth wire connection of 14SWG TC wire wire and making good of theconcealed portion with suitable colour forconcealed PVC FAN POINT (SD-3)

102-A - 1 RM(One

RunningMetre)

-

22 | P a g e

48 525.00 Supply, laying and jointing of 2 core x 10 Sq.mmarmoured aluminium UG CABLE from meterboard to EB pole to service connectionsincluding cost and conveyance of all materialsand labour charges for laying and fixing thecable etc., complete (SD-198)

SS - 1 RM(One

RunningMetre)

-

49 17.00 Supply and fixing of 12 W / 18 W square typelatest model LED light with necessaryaccessories fixing on Ceiling/ false ceiling withPVC unsheathed Copper leads from terminals tothe fitting.

SS - Each-

50 1.00 Supply and fixing of 32 Amps DPIC Switch of500 V with metal clad with fuse and neutral(Side Handle) on suitable TW Board , with earthconnection only SD 143

SS - Each-

51 2.00 Supply and fixing of TNEB METER BOARDsuitable for 32A single phase service connectionwith 32A fuse unit 500V 32 A neutral link andearth link (1"x1/8" Copper flat) on TW plank ofsize 375mm x 300mm x 19mm with supportingTW reepers of 1" thick an either side withpainting with suitable bold and nuts for fixingthe TW plank on wall with earth connection andinter connection with 7/20 PVC insulated copperwire form EB meter to FUSE ONLY (SD-125)

SS - Each-

23 | P a g e

52 80.00 Providing Pathway hand rail using 304 Grade16SWG SS pipe 40 mm Dia as verticals at highspaced at 1 Meter centre with top railing 50 mmDia and 25 mm dia pipe intermediate rigidlyfixed with spacing of 0.30 mtr centre to centrevertically in the existing concrete / brick wallstructure and properly fixed including allmaterials and labour charges polishing transportcharges etc., complete

SS - 1 RM(One

RunningMetre)

-

53 1380.00 Providing and fixing Kerb Slab of size 0.45X0.125 X 0.30 MtrSupply and fixing of PCC precast kerb wall inPCC 1:2:4 mix using 20mm gauge hard brokengranite stone jelly and river sand .Labourcharges for fixing the kerb wall in positioncomplying with standard specification asdirected by the departmental officers etc.,complete

30 - 1 RM(One

RunningMetre)

-

54 Supplying, laying and jointing of followingsize of CPVC pipes of approved make and ISIquality FINOLEX (OR) EQUIVALENT (WITHlSI MONOGRAM) including fixing CPVCspecials but excluding cost of CPVC specials,cutting, threading of pipes concealing thepipes into wall with necessary clamps andnails , dismantling the wall, laying pipes andmaking good the dismantled portion to originalcondition with necessary brick work andplastering wherever necessary etc. complete asdirected by the Corporation Officers.

SS -

a) 50.00 For 40 mm Dia CPVC Pipe -Working Pressure10 kg/ sq.m

- 1 RM(One

RunningMetre)

-

24 | P a g e

b) 30.00 For 25 mm Dia CPVC Pipe -Working Pressure10 kg/ sq.m

- 1 RM(One

RunningMetre)

-

c) 20.00 For 20 mm Dia CPVC Pipe -Working Pressure10 kg/ sq.m

- 1 RM(One

RunningMetre)

-

d) 50.00 For 15 mm Dia CPVC Pipe -Working Pressure10 kg/ sq.m

- 1 RM(One

RunningMetre)

-

55 Supplying and fixing in position first quality andapproved variety of Gun metal Gate Valve /Wheel Valve with BIS make of the following diaincluding cost of shellac, thread balls, etc.,complete complying with standardspecifications (for both internal and externalwater supply arrangements). The valves to beused on work shall be got approved by theExecutive Engineer before use on work.

102 A -

a) 15.00 20mm - Each-

b) 3.00 40mm - Each-

25 | P a g e

56 Supplying and fixing in position the followingCPVC, PVC & GI Specials of heavy type andapproved quality and good variety excludingfixing charges but including necessary cuttingand threading of GI pipes, jointing the GIspecials and painting with two coats with goodvariety and best quality synthetic enamel paintover a coat of red oxide primer and jointing thespecials with pipe line using shellac etc.,complete complying with standard specification.(The GI specials should be got approved by theExecutive Engineer concerned before use onworks.)

102 A -

a) 20.00 25 mm Dia CPVC Elbow - Each-

b) 20.00 25 mm Dia CPVC Tee - Each-

c) 25.00 25 mm Dia CPVC coupling - Each-

e) 10.00 20mm Dia CPVC Elbow - Each-

e) 12.00 20mm dia CPVC Tee - Each-

f) 40.00 20 & 15mm dia CPVC elbow - Each-

26 | P a g e

g) 10.00 40mm dia GI Tee - Each-

h) 8.00 40mm dia GI Elbow - Each-

i) 4.00 40mm dia GI Union - Each-

j) 12.00 40mm dia GI Nipple - Each-

k) 15.00 40mm x 25mm dia GI Nipple - Each-

l) 5.00 40mm dia GI Coupling - Each-

m) 10.00 75mm dia PVC Plain elbow - Each-

n) 10.00 75mm dia PVC Door Elbow - Each-

o) 10.00 75mm dia PVC Door Tee - Each-

27 | P a g e

p) 10.00 75mm dia PVC Tee - Each-

q) 10.00 110mm dia PVC Door Tee - Each-

r) 5.00 110mm dia PVC Bend - Each-

s) 2.00 110mm dia PVC Cowl - Each-

t) 15.00 110mm dia PVC door Bend - Each-

u) 10.00 110mm dia PVC Tee - Each-

57 6.00 Supplying and fixing in position CI manholecovers with CI frames (Heavy duty) of size60cm x 60cm of best approved quality as perstandard specification etc., complete complyingwith standard specifications

100 - Each-

28 | P a g e

58 27.00 Exterior Façade;

Supplying, fabricating and fixing in position ofglazed designer tiles of dimension 450 X 450mm and. structural the frame to be made with 45mm X25 mm X 2 mm type angle aluminiumpowder coated for support the cladding at equalinterval.. The rate including cost of all materiallabour and conveyance to site etc. complete

SS -1M²(One

SquareMetre)

-

59 1410.00 Supply, fabrication and fixing of CompoundGate and Truss work with one coat of primingcoat including Cost and conveyance of allmaterials and labour charges to site etc.complete- Providing and fixing pre-fabricatedDouble leaf compound gate with outer frame120 X60 mm Box section with 16mm brightsquare bars scroll of 16 X 8 mm flat with aldroptower – built , cover plate and bearing includingproviding 450 mm height 300 mm width motifsof M S plate 4 mm thick and lockingarrangement, pintals and hold fast embedded incement concrete 1:2:4 (1 cement: 2 coarse sand: 4 granitic or basaltic aggregate 20mm nominalsize) including applying priming coat with readymixed red lead paint and painting 2 or morecoats with superior ready mixed paint ofapproved brand and manufacture in all shades asper direction of Engineer includingtransportation and loading , unloading chargesetc. complete.

84-A - 1 KG(One

Kilograms)-

29 | P a g e

60 35.00 Supply, fabrication & installation of Opaqueglass of cladding. The UPVC frame shall bemade out of extruded high impact resistant rigidthermo vinyl polymers corresponding to DIN53479 with excellent UV stabilization. The fireproperty of the extruded section iscorresponding to DIN 52613. The Outer frameshall dimensions of 96 x45 mm with wallthickness of 1.5mm ± 0.3 mm with overallprocess variation. The sliding shutter frameshall be made 57 x 32 mm with wall thickness of2mm ± 0.3mm. The glazing beading shall bemade out of extruded section having overalldimensions of 14 x 18.8 x 21 mm with wallthickness of 1.3 mm ± 0.3 mm. The interlockingsystem made out of extruded section havingoverall dimensions of 35mm x 5mm shall beprovided in between all shutters. Theinterlocking section will be ultrasonicallywelded on the shutter. EPDM weathering sealsand glazing seals shall be provided along withnecessary fittings.

SS -1M²(One

SquareMetre)

-

61 21.00 Seating BenchesProviding and laying cast iron with handlegarden benches of approved design withWooden Strip Model RI B02 (Normal Size) seatof length 5ft x2ft (1.5 X 0.60 Mtr) width placedand fixed with necessary bolts and nuts withpainting the cast-iron parts and other membersand varnishing the battens etc. all complete asper directions of engineer in-charge. IncludingTransportation cost and embossing logo on thebenches etc. as approved by Engineer- in -charge etc. complete

SS - Each-

30 | P a g e

62 55.00 Supplying and erecting LED square / circular 16to 20W down lighter having pressure die-castaluminium housing, opal translucent cover,mounting arrangement with board for surfacetype or spring loaded mounting clips for flushtype complete.

SS - Each-

63 81.00 Supply and fixing of 80 W LED Light, completewith all accessories on the existing bracket onstreet light poles; 1 amps 240 VAC Lumenoutput = 95-100 Lumens/watt voltage: 100-277VAC 50/60Hz., Color Temperature:white.5000-6500K.• (Seoul Semiconductor brand / body materialCasing – Aluminium Die cast )

SS - Each-

64 1.00 Supply and fixing of A.C Ceiling fan complete1200 mm (48") sweep with 300mm Downrod and Stepped electronic 300W / 450Wsquare type fan regulator (Anchor Deluxe/ Equivalent) with necessary accessories fixingon Ceiling/ false ceiling with PVC unsheathedCopper leads from terminals to the fitting.CONFORMING TO ISS 374 / 1979

SS - Each-

31 | P a g e

65 Supplying, fabrication and fixing in position ofStructural Glazing DOOR and FACAD withToughened Glass 12mm t/g with cut-out chargesand Ozone Glass fittings with Silicon paste withnecessary accessories such as rubber beading,aluminium clips, best double action floor springdoor closer, handle locks and glass including allmaterials labour and power consumptioncharges required for fabrication if necessarychopping dismantling making necessary holes inRCC columns, beams or masonary wherevernecessary with power drill to the extent requiredand made good to the original conditions afterfixing etc., complete. All the materials shouldbe got approved by the Engineer in chargebefore fixing as directed

SS -

a) 1.00 For Glass Door size 1.8 x 2.7 Mtr double LeafDoor with Top Panel)( Refer Sketch No 1)

- Each-

b) 1.00 For Fixed Glazing Partition 2 X 1.00 X 2.70Mtrs ( Refer Sketch No8)

- Each-

32 | P a g e

66 Paving the floor with Granite slabs (super finepolished with machine cut edges) of approvedquality and colour of following sizes and 18 mmto 20 mm thick of approved make, quality andcolour in all floors over a base layer of cementmortar 1:3(one cement three sand) 20mm thickand laid straight alignment and pointed neatlywith colour cement at the rate of 0.40kg/m2 laidwithout any air gap in the tiles neatly and fixingin position as per standard specifications and asdirected by the departmental officer. The colour& quality of stone should be got approved byMunicipal Engineer before use on work

3 -

a) 35.00 For 50 mm/ 25 mm strip Rough Granite Drycladding at compound wall or similar places

-1M²(One

SquareMetre)

-

67 4.00 Providing & erecting 3 m high (clear height)precast decorative Heritage light pole withGranite Appearance (3 Lined dressed granitePillar) of approved quality and colour of size 9"X9" of precast RCC pole concealment with 10mm thick granite tile of approved make, qualityand colour with groove over a base layer ofcement mortar 1:3(one cement three sand)20mm thick and laid straight alignment andpointed neatly with colour cement at the rate of0.40kg/m2 laid without any air gap in thegranite stone neatly and fixing in position as perstandard specifications complete with allaccessories, driver / power supply (if any),connecting wire complete as required anddirected by the departmental officer. Suppliermust provide 5years warranty on the product.The colour & quality of stone should be got

SS - Each-

33 | P a g e

approved by Municipal Engineer before use onwork.

68 54.00 Providing and fixing Bitumen Felt 15 mm thickpad For Expansion Joint.

-1M²(One

SquareMetre)

-

Total Work Value

GST at 18%

Grand Total

Total Number of Items- 68 (Sixty Eight itemsonly) -