Law Enforcement Program...Law Enforcement Program • • • • • • • • • • • • • • • • • • • • • •
PROUD LAW ENFORCEMENT SUPPORTER THE LEUPOLD FULL … · IALEFI — The International Association of...
Transcript of PROUD LAW ENFORCEMENT SUPPORTER THE LEUPOLD FULL … · IALEFI — The International Association of...
PROUD LAW ENFORCEMENT SUPPORTER
In addition to providing military and law enforcement
agencies with the superior optics they need to fulfill
their missions, Leupold is proud to be a member of the
following organizations:
ASLET — The American Society of Law Enforcement Trainers
IALEFI — The International Association of Law Enforcement
Firearms Instructors
NTOA — The National Tactical Officers Association
NRA — The National Rifle Association
Leupold & Stevens, Inc., PO Box 688, Beaverton, OR 97075-0688
14400 NW Greenbrier Parkway, Beaverton, OR 97006-5790 USA
www.leupold.com
Printed in the U.S.A.This publication may not be reprinted or otherwise reproduced
without the expressed written consent of Leupold & Stevens, Inc.
Copyright © 2006 Leupold & Stevens, Inc. All rights reserved.
2 0 0 6 T A C T I C A L O P T I C S
THE LEUPOLD FULL LIFETIME GUARANTEE
Leupold and Stevens, Inc. is an American, family-owned, fifth-generation company that has been designing,
machining, and assembling precision optical instruments for nearly 100 years. Leupold’s success has been built on
our commitment to your absolute satisfaction, and our commitment to building the best optics for the shooting
sports and for the law enforcement / military community. It’s for these reasons that we offer the Leupold Full
Lifetime Guarantee.
If any Leupold Golden Ring product is found to have defects in materials or workmanship, we will, at our option,
repair or replace it. FREE. Even if you are not the original owner. No warranty card is required. No time limit applies.
Certain special purpose products are covered by specific warranties in regard to their own individual features.
For more information, please consult the Leupold Web site at www.leupold.com.
LEUPOLD MARK 4 OPTICAL PRODUCTS WARRANTY
Warranties on Leupold Mark 4 optical products vary depending on use and other factors. For more information
regarding the warranties on these products, contact Leupold at 503-526-1400.
LEUPOLD GREEN RING LIMITED LIFETIME WARRANTY
Leupold Green Ring optics are engineered and manufactured to standards set and monitored by the design
engineers at Leupold’s Oregon factory. The goal is to provide you with reliable performance at a reasonable price.
Should service ever become necessary, these fine optics are covered by the Leupold Green Ring Limited Lifetime
Warranty. All service work is performed by the same Leupold Product Service Specialists who work on our Leupold
Golden Ring products here in Oregon.
LEUPOLD GREEN RING ELECTRONICS WARRANTY
Leupold Green Ring electronic optical products are warranteed and protected from defects in materials and
workmanship for TWO years (RX-III and RX-IV models) or ONE year (RX-I and RX-II models) from the date of purchase.
Leupold & Stevens, Inc. reserves all other rights. AMERICA’S OPTICS AUTHORITY; CQ/T; DESIGN ONLY (GOLDEN RING); DUPLEX; GOLDEN RING; L AND DESIGN; LEUPOLD;
LPS; MARK 4; MULTICOAT 4; PERFORMANCE STARTS ON THE INSIDE; RAINCOTE; VARI-X; and VX are registered trademarks of Leupold & Stevens, Inc., Beaverton, Oregon.
ADVANCED IMAGE OPTIMIZATION; ALUMINA; BLACK RING; CASCADES; DARK EARTH; FX; GREEN RING DESIGN; GREEN RING; INDEXED MATCHED LENS SYSTEM; KATMAI;
L-COAT; LR/T; MATCH 13 RETICLE SYSTEM; MESA; MR/T; OLYMPIC; OR; PINNACLES; PRW; QRW; QUICK RELEASE; QUICK SET ROTARY MENU; RX; SEQUOIA; TBR; TRUE BALLISTIC
RANGE; and YOSEMITE are trademarks of Leupold & Stevens, Inc., Beaverton, Oregon. Note: We reserve the right to make design and/or material modifications without
prior notice.
Leupold products are manufactured under one or more of the following patents: U.S.: 4,393,595; 4,395,096; 4,408,842; 4,643,542; 5,035,487; 5,231,535; 5,671,088; 5,866,048;
6,005,711; 6,359,418; D347,441; D420,807; D421,286; D427,658. D490,097; D512,449. Foreign Patents: 374-359; CA88472; CA1,253,381; DE69216763.3; DE-M9304093.8;
EP0540368; SE55201. The ARD (anti-reflection device) is manufactured by Tenebraex Corp. (U.S. Patent No. 4,929,055) under the name KillFlash, which is a trademark of
Tenebraex Corp.
Mission Specific Optics
3
L eupold® Mark 4® — Answering The Cal l
When the United States military needed a new riflescope that would not
only function, but excel in combat, the harshest environment on earth,
Leupold® answered the call with the ULTRA scopes specifically designed
to fit that purpose. With the ULTRA, we set the standard in tactical
optics, and we continue to do so today. The Leupold Mark 4® series,
which evolved from that first call by our armed forces, has become the
benchmark for all tactical riflescopes to follow.
“Mission Specific” has become the driving force behind the creation of Leupold Mark 4 optics. What that means is that we won’t build products for military operators or law enforcement officers without fully understanding their mission requirements. We seek their input. They seek our advice. The results are products that meet specific user requirements and as many mission contingencies as possible. Leupold optics are the overwhelming choice of military and police professionals in the United States and around the world. This tells us we’re accomplishing our mission.
Today, Leupold Mark 4 riflescopes are used to watch over police SWAT teams as well as by the police who patrol the streets daily. They’re being used on frigid mountaintops in Afghanistan; in the searing desert heat of Iraq; and in the wet, steaming jungles of
the Philippines. Leupold’s philosophy helped create the riflescopes that have come to define tactical optics. For rugged dependability and absolute waterproof integrity in the most extreme conditions imaginable, for sheer optical excellence and flexibility, and finally, for fail-safe accuracy every shot, the Leupold Mark 4 line of riflescopes has no equal.
Everyone from special operations soldiers forward deployed across the globe in defense of freedom, to law enforcement officers serving and protecting their community on a tight budget deserves the most rugged, accurate, dependable optics anywhere. You’ll find optics designed for your specific mission’s needs in Leupold’s newly expanded Mark 4 line-up. At Leupold, we feel we’re helping keep our communities safe, as well as helping to defend the nation.
So whether you need the extreme long-range scope, the ultimate fast entry/close quarter combat optic, or something in between, Leupold is ready with Mark 4 optics that are specifically matched to both the mission and your unique conditions.
Optics for Every Mission Profile Leupold Mark 4 optics are grouped by mission profile, to help you find the optics that are right for the job. For everything from clearing a building to area containment, turn to Leupold Mark 4 Close Quarter/Tactical (CQ/T®) optics. Our MR/T™ (Mid Range/Tactical) riflescopes are for that middle ground between short and long range. When serious precision at long distance is a must, so is a Leupold LR/T™ (Long Range/Tactical) riflescope. Each category overlaps with the next for total mission coverage…simply put, there’s a Leupold Mark 4 optic to cover any situation.
Mission Specific Optics
MARK 4 2.5-8X36MM MR/T M1
ILLUM. RETICLEALSO AVAILABLE IN
NON-ILLUMINATED MODELS
New Tactical Optics for 2006
MARK 4 2.5-8X36MM MR/T M2
ILLUM. RETICLEALSO AVAILABLE IN
NON-ILLUMINATED MODELS
LEUPOLD MARK 4 SCOPES
LR/T—6
MR/T—12
PR—14
CQ/T—16
Mounting Systems—28
Reticle Configurations—32
BDC Dials —34
SPOTTING SCOPES
Mark 4 —18
Golden Ring—20
Green Ring—22
BINOCULARS
Tactical —19
Golden Ring—25
Green Ring—26
RANGEFINDERS—24
ACCESSORIES—30
PRODUCT ORDERING—34
PRODUCT FEATURES—35
MARK 4 3.5-10X40MM LR/T M2
ILLUM. RETICLEWITH DARK EARTH FINISH
New! Mark 4 2.5-8x36mm MR/T™ M1 and M2
The new 2.5-8x36mm MR/T™ is built for mid-range engagements, with eye relief optimized for bolt-action rifles, as well as rifles such as the M-14 functioning in the Designated Marksman role. Available with both illuminated and standard reticles.
New! Mark 4 3.5-10x40mm LR/T™ M2 with Dark Earth™ Finish
This powerful long-range riflescope is now available in our exclusive new Dark Earth™ finish.
New! 10x50mm Tactical Binocular
Now featuring a unique rotating Mil Dot or Leupold TMR reticle, so you can estimate range to an object on a slope without tilting the binocular.
10X50MM TACTICAL BINOCULARS
New Tactical Optics for 2006
Leupold® Mark 4® LR/T™ Scopes
Tactical Reticle Configurations–Page 26
Leupold® Mark 4® PR Scopes
5
3.5-10X40MM LR/T M33.5-10X40MM LR/T M1 3.5-10X40MM LR/T M1 ILLUM. RETICLE
3.5-10X40MM LR/T M1 FRONT FOCAL
3.5-10X40MM LR/T M3 ILLUM. RETICLE
3.5-10X40MM LR/T M3 FRONT FOCAL
4.5-14X50MM LR/T M1 ILLUM. RETICLE
ALSO AVAILABLE IN METRIC
4.5-14X50MM LR/T M1
6.5-20X50MM LR/T M1 ILLUM. RETICLE
8.5-25X50MM LR/T M16.5-20X50MM LR/T M1 8.5-25X50MM LR/T M1 ILLUM. RETICLE
Leupold Mark 4 Long Range/Tactical optics were designed to give you as much control as possible over extreme long-distance shooting.
THIS IS THE ENTIRE LINE-UP OF LEUPOLD MARK 4 TACTICAL OPTICS: the riflescopes, spotting scopes, and other tools the first
responders use. Each is mission specific, designed to do a job and do it uniquely and incredibly well. Here we’ll give you a brief
synopsis of each group’s strengths, and direct you to the pages in the catalog where you can learn more about each.
10X40MM LR/T M1 10X40MM LR/T M3 16X40MM LR/T M1
4
MARK 4® OVERVIEW LR/T
pg. 6MR/Tpg. 12
PRpg. 14
CQ/Tpg. 16
Spotting Scopespg. 18
Leupold® Mark 4® CQ/T® Scope
Leupold® Mark 4® Spotting Scopes
Leupold® Mark 4® MR/T™ Scopes
Tactical Reticle Configurations–Page 26 MARK 4 12-40X60MM
TACTICAL
1-3X14MM CQ/T
1.5-5X20MM MR/T M2ILLUM. RETICLE
3-9X36MM MR/T M1 3-9X36MM MR/T M3 3-9X36MM MR/T M3ILLUM. RETICLE
3-9X36MM MR/T M1ILLUM. RETICLE
NEW!2.5-8X36MM MR/T M1
NEW!2.5-8X36MM MR/T M1
ILLUM. RETICLE
NEW!2.5-8X36MM MR/T M2
NEW!2.5-8X36MM MR/T M2
ILLUM. RETICLE
4.5-14X40MM PR LONG RANGE
3.5-10X40MM PR1.5-5X20MM PR 3-9X40MM PR
For everything from 50 to 700 meters, these are the scopes you can count on to help get the job done because we gave them everything you would.
On a sniper team, two must see as one. Leupold Mark 4 and Golden Ring® spotting scopes have the optical performance, ruggedness, and absolute waterproof integrity needed to get the job done, in any conditions. This spotting scope is available with our Leupold Mil Dot “round dot” reticle or our Tactical Milling Reticle for increased ranging precision.
Combining the strengths of a red dot sight and a variable power riflescope, the Leupold Mark 4 CQ/T was designed to handle the close-contact situations common to both law enforcement and the military.
The Leupold Mark 4 Precision Rifle line-up was created so that even a force with a tight budget could outfit its officers with quality, dependable tactical optics.
NEW!3.5-10X40MM LR/T M2
ILLUM. RETICLEDARK EARTH™ FINISH
TMR SPR IlluminatedSPR
Mil Dot Duplex Illuminated Duplex
CQ/T Illuminated Circle Dot
Fine Duplex Target DotIlluminated TMR
Illuminated Mil Dot
Leupold® Mark 4® LR/T™ Scopes
Leupold® Mark 4® MR/T™ Scopes
Leupold® Mark 4® PR Scopes
Leupold® Mark 4® CQ/T® Scope
Leupold® Mark 4® Spotting Scopes
Some say long range shooting is a matter of luck. We prefer not to leave something this important to chance. Leupold Long Range/Tactical optics give you as much control as possible over this extreme type of shooting. With the Leupold Mark 4 3.5-10x40mm LR/T riflescopes, we’ve given you the tools to do the job...the rest is up to you.
Front Focal model – with the reticle in the front focal plane of the scope, the reticle increases in magnification along with the image, so you can determine range at any magnification setting.
30mm maintubes – the wider diameter body offers increased windage and elevation adjustment.
Butler Creek® Flip-Open™ lens covers – standard issue with Mark 4 LR/T riflescopes.
Fully Illuminated Mil Dot reticles – available in select models for precise shot placement in low light. All Leupold illuminated reticles are night-vision compatible.
Index Matched Lens System™– special lens coatings matched to each lens surface transmit the maximum amount of usable light possible to your eye, for the brightest, clearest sight picture possible.
L O N G R A N G E / T A C T I C A L
3.5-10X40MM LR/T M1 FRONT FOCAL
3.5-10X40MM LR/T M3 FRONT FOCAL
3.5-10X40MM LR/T M1 ILLUM. RETICLE
ALSO AVAILABLE IN NON-ILLUMINATED MODELS
3.5-10X40MM LR/T M3 ILLUM. RETICLE
ALSO AVAILABLE IN NON-ILLUMINATED MODELS
6
3.5-10X40MM LR/T M2ILLUM. RETICLE
DARK EARTH FINISH
ELEV WIND BDC
M1 Dials 1/4-MOA 1/4-MOA NO
M2 Tall 1/2-MOA 1/2-MOA YES
M3 Dials 1-MOA 1/2-MOA YES
See BDC dial options on page 34
L O N G R A N G E / T A C T I C A L
MARK 4 LR/T RETICLE & MODELS PART NUMBER
3.5-10X 40MM LR/T M1 MIL DOT 58850 FRONT FOCAL TMR 60030
3.5-10X 40MM LR/T M3 MIL DOT 58860 FRONT FOCAL TMR 60035
3.5-10X 40MM LR/T M1 DUPLEX 52218 • DUPLEX 53666 MIL DOT 52128 • MIL DOT 53668 TMR 60020 • TMR 60010
3.5-10X 40MM LR/T M2 • TMR 62150 WITH DARK EARTH FINISH
3.5-10X 40MM LR/T M3 DUPLEX 51182 • DUPLEX 53670 MIL DOT 51850 • MIL DOT 53672 TMR 60025 • TMR 60015
NEW FOR 2006
• ILLUMINATED RETICLE
MATTE BLACK FINISH ON ALL MODELS EXCEPT 3.5-10X40MM LR/T M2 WHICH IS DARK EARTH™ FINISH
M1 Dials M2 Tall Dials M3 Dials
LR/T ™ 40MM VARIABLE POWER40MM VARIABLE POWERLR/T ™
4.5-14X50MM LR/T M1 ILLUM. RETICLE
ALSO AVAILABLE IN METRIC AND NON-ILLUMINATED MODELS
6.5-20X50MM LR/T M1 ILLUM. RETICLE
ALSO AVAILABLE IN NON-ILLUMINATED MODELS
8.5-25X50MM LR/T M1 ILLUM. RETICLE
ALSO AVAILABLE IN NON-ILLUMINATED MODELS
9
IlluminatedMil Dot
IlluminatedDuplex
IlluminatedTMR
ILLUMINATED RETICLE M1 Dials
ELEV 1/4-MOA
WIND 1/4-MOA
BDC NO
Fully illuminated reticles – Illuminated Mil Dot, Duplex®, and TMR reticles available in select models for precise shot placement in low light.
Finger-adjustable dials – the knurled windage and elevation adjustment dials also feature audible, tactile clicks to make adjustments with extreme precision.
L O N G R A N G E / T A C T I C A LL O N G R A N G E / T A C T I C A L
MARK 4 LR/T RETICLE & MODELS PART NUMBER
4.5-14 X50MM LR/T M1 DUPLEX 54660 • DUPLEX 56060 MIL DOT 54560 • MIL DOT 56070 TMR 60005 • TMR 60000
4.5-14 X50MM LR/T M1 • MIL DOT 57045 METRIC (.5CM)
6.5-20 X50MM LR/T M1 MIL DOT 54680 • MIL DOT 56080 TMR 60080 • TMR 60075
8.5-25 X50MM LR/T M1 MIL DOT 54690 • MIL DOT 56090 TMR 60070 • TMR 60065
• ILLUMINATED RETICLE
MATTE BLACK FINISH ON ALL MODELS
M1 Dials
LR/T ™ 50MM VARIABLE POWERLR/T ™ 50MM VARIABLE POWER
8
10X40MM LR/T M1 10X40MM LR/T M3 16X40MM LR/T M1
These Leupold LR/T models – the Mark 4 10x40mm LR/T M1 and Mark 4 16x40mm LR/T M1 – are arguably the toughest, highest performing riflescopes you’ll find anywhere. It’s no surprise that the Mark 4 10x40mm LR/T M3 was chosen as the primary day optic of the U.S. Army M-24 Sniper System. The reasons why are clear.
Superior edge-to-edge sharpness – total clarity across visual field and outstanding brightness for optimal low-light capability.
Click adjustments – audible, tactile “click” windage and elevation adjustments for extreme accuracy.
Precision parallax adjustment – adjust for specific ranges from 50 yards to infinity using turret mounted focus knob, without taking your eyes off the target.
Zeroed adjustment knobs – once sighted-in, adjustment knobs can be zeroed.
30mm maintubes – the wider diameter body offers increased windage and elevation adjustment.
Solid construction – milled from one solid piece of 6061-T6 aircraft-grade aluminum, these scopes are rugged and absolutely waterproof in all conditions.
MARK 4 LR/T RETICLE & MODELS PART NUMBER
10X 40MM LR/T M1 DUPLEX 45578 MIL DOT 48431 TMR 60085
10X 40MM LR/T M3 DUPLEX 45582 MIL DOT 47638 TMR 60090
16 X40MM LR/T M1 DUPLEX 45580 TARGET DOT 45581 MIL DOT 50541 TMR 60095
MATTE BLACK FINISH ON ALL MODELS
L O N G R A N G E / T A C T I C A LL O N G R A N G E / T A C T I C A L
LR/T ™ 40MM FIXED POWERLR/T ™
10
40MM FIXED POWER
You can’t afford to leave an inch of ground uncovered. For everything from 50 to 700 meters, these are the scopes you can count on to help get the job done, because we gave them everything you would. The original Leupold Mark 4 3-9x36mm MR/T was specifically designed with a compact eye relief to maximize the performance of 5.56mm AR-style firearms. Now, with the new Leupold Mark 4 2.5-8x36mm MR/T and its nearly 5 inches of eye relief, you can give that same performance to a bolt-action rifle, AR-10, FAL, G3, SCAR-H, or M-14 serving in the Designated Marksman role.
30mm maintube – the 3-9x36mm MR/T and 2.5-8x36mm MR/T have 90-MOA of both elevation and windage adjustments, giving you the ability to engage targets without holdovers at 1,000 yards.
Butler Creek Flip-Open lens covers – come standard with all Mark 4 MR/T riflescopes.
Eye relief – whether you’re shooting a M16/AR-15 type rifle, another type assault rifle, or even a bolt-action, there’s a MR/T with the generous, non-critical eye relief you need in an engagement.
Rugged and waterproof – each scope is guaranteed to be 100 percent waterproof/ fog proof and is designed to withstand the rigors of the modern battlefield.
Click adjustments – finger-adjustable, knurled windage and elevation adjustments with audible, tactile “clicks” for precision.
Illuminated reticles – choose Illuminated TMR, Mil Dot, SPR, or Duplex reticles. All Leupold illuminated reticles are night-vision compatible.
Bullet Drop Compensation (BDC) – M2 and M3 dials marked for bullet drop compensation.
M I D R A N G E / T A C T I C A LM I D R A N G E / T A C T I C A L
2.5-8X36MM MR/T M2 ILLUM. RETICLE
ALSO AVAILABLE IN NON-ILLUMINATED MODELS
3-9X36MM MR/T M1 ILLUM. RETICLE
ALSO AVAILABLE IN NON-ILLUMINATED MODELS
2.5-8X36MM MR/T M1 ILLUM. RETICLE
ALSO AVAILABLE IN NON-ILLUMINATED MODELS
3-9X36MM MR/T M3 ILLUM. RETICLE
ALSO AVAILABLE IN NON-ILLUMINATED MODELS
13
MR/T ™
1.5-5X20MM MR/T M2ILLUM. RETICLE
ELEV WIND BDC
M1 Dials 1/4-MOA 1/4-MOA NO
M2 Dials 1/2-MOA 1/2-MOA YES
M2 Tall 1/2-MOA 1/2-MOA YES
M3 Dials 1-MOA 1/2-MOA YES
See BDC dial options on page 34
MARK 4 MR/T RETICLE & MODELS PART NUMBER
1.5-5 X20MM MR/T M2 • SPR 56994
2.5-8 X36MM MR/T M1 MIL DOT 60205 • MIL DOT 60190 TMR 60210 • TMR 60220
2.5-8 X36MM MR/T M2 MIL DOT 60160 • MIL DOT 60150 TMR 60180 • TMR 60170
3-9 X36MM MR/T M1 DUPLEX 57080 • DUPLEX 57060 MIL DOT 57070 • MIL DOT 57050 TMR 60055 • TMR 60045
3-9 X36MM MR/T M3 MIL DOT 57075 • MIL DOT 57055 TMR 60060 • TMR 60050
NEW FOR 2006
• ILLUMINATED RETICLE
MATTE BLACK FINISH ON ALL MODELS
M1 Dials M2 Dials M2 Tall Dials M3 Dials
P R E C I S I O N R I F L EP R E C I S I O N R I F L E
3-9X40MM PR
15
3.5-10X40MM PR 4.5-14X40MM PR LONG RANGE
1.5-5X20MM PR
Fine Duplex Mil Dot SPRDuplex
PR PR
MARK 4 PR RETICLE & MODELS PART NUMBER
1.5-5 X20MM PR SPR 59100
3-9 X40MM PR DUPLEX 56860 MIL DOT 56870
3.5-10 X 40MM PR DUPLEX 56125 MIL DOT 56120
4.5-1 4 X 40MM PR DUPLEX 56140 LONG RANGE FINE DUPLEX 56145 MIL DOT 56130
MATTE BLACK FINISH ON ALL MODELS
The Leupold Mark 4 Precision Rifle line-up was created so that even a force with a tight budget could outfit its officers with quality, dependable tactical optics. PR scopes pass the same tests for ruggedness and waterproofing as our LR/T, MR/T, and CQ/T scopes. They’re quite simply the best balance of price and performance you’ll find anywhere, so you don’t have to settle for anything less.
Precision adjustment – 1/4-MOA “click” windage and elevation adjustments with 15-MOA of adjustment for each revolution.
Custom BDC target turrets – available from the Leupold Custom Shop for the 3-9x40mm PR, 3.5-10x40mm PR, and 4.5-14x40mm PR Long Range scopes. See BDC dial options on page 34.
Index Matched Lens System – available on the 3.5-10x40mm PR and 4.5-14x40mm PR Long Range, it transmits the maximum amount of usable light to your eye, for outstanding brightness, clarity, and contrast.
Multicoat 4® lens system – specially chosen lens coatings on the Mark 4 3-9x40mm PR ensure brightness and clarity.
Impeccable sight picture – outstanding clarity and brightness for excellent low-light performance.
Solid construction – legendary Leupold ruggedness and absolute waterproof integrity is built in.
Special Purpose Reticle – available on the Mark 4 1.5-5x20mm PR.
Multiple reticle options – Duplex, Fine Duplex, Mil Dot, or SPR reticles available.
C L O S E Q U A R T E R / T A C T I C A LC L O S E Q U A R T E R / T A C T I C A L
1-3X14MM CQ/T
17
CQ/T ®
The Leupold Mark 4 1-3x14mm CQ/T is a revolutionary optical sight for tactical firearms such as the AR-15 and M16. Developed in cooperation with both the U.S. military and law enforcement agencies, the Mark 4 CQ/T combines the strengths of a red dot sight and a variable power riflescope. Incredibly tough, 100 percent waterproof, and devastatingly accurate, only the Mark 4 CQ/T is ready and able to handle the variety of close-contact situations common to both law enforcement and the military.
True 1x setting – functions as your non-magnifying, illuminated sight for tactical scenarios or engaging targets at extremely close range.
2x or 3x settings – the additional power you need to accurately engage targets at medium ranges.
1/2-MOA “click” adjustments – for windage and elevation.
Butler Creek Flip-Open lens cover – comes standard with the Mark 4 CQ/T riflescope.
Leupold Circle Dot reticle – a bold aiming point for the operator, and also provides range estimation.
Ten reticle illumination settings – to match any light conditions without overwhelming your natural low-light vision; two low-intensity settings work with night-vision devices.
Attach accessories – using the integrated MIL-STD-1913 rail mount cross-slots.
Large field of view – for fast target acquisition and tracking of moving targets.
Mark 4 CQ/T ARMS™ Throw Lever Mount – get a precise and repeatable zero every time with this quick-detaching mount for the Leupold Mark 4 CQ/T optical sight. With rugged, all-metal construction and a black, anti-glare matte finish, it’s ready to handle any mission. Fits all MIL-STD-1913/ Picatinny-style rails. See page 28.
AA battery – powers the Mark 4 CQ/T for up to 600+ hours at medium setting.
MARK 4 CQ/T RETICLE & MODELS PART NUMBER
1-3 X14MM CQ/T • CIRCLE DOT 52155
• ILLUMINATED RETICLE
MATTE BLACK FINISH
LEUOPLD MARK 4 1-3X14MM CQ/T
CQ/T ®
L E U P O L D M A R K 4 S P O T T I N G S C O P E S / L E U P O L D T A C T I C A L B I N O C U L A R S
19
SPOTTING SCOPES & BINOCULARS
FINISH & PART MODELS RETICLE NUMBER
MARK 4 12-40X60MM TACTICAL SPOTTING SCOPE
MIL DOT 53756 TMR 60040
10X50MM TACTICAL BINOCULAR
NO RETICLE 59120 MIL DOT 59125 TMR 59130
NEW FOR 2006
MATTE BLACK FINISH COYOTE BROWN
LEUPOLD MARK 4 12-40X60MM
TACTICAL
For the sniper team, two must see as one. Leupold spotting scopes’ outstanding optics are designed to give you a crisp, bright sight picture, even in low light. Built with legendary Leupold ruggedness, they perform wherever the mission takes them, and they prove it every day, around the world. An April 7, 2003 Time magazine photo essay on the war in Iraq shows U.S. Special Forces using our 12-40x60mm spotting scope to locate enemy positions.
Tactical Milling Reticle – expands on existing Mil Dot reticles, using various sized and spaced hash marks on the stadia for increased ranging precision, accuracy, and quick 1-meter range estimating reference points. All Mil Dot calculations are TMR compatible.
Mil Dot reticle – standard for all branches of the U.S. armed forces, the Mil Dot reticle was designed to assist in range estimation for superior accuracy in long range shooting.
LEUPOLD 10X50MM TACTICAL
TMR
Mil Dot
Leupold Mark 4 12-40x60mm Tactical Spotting Scope
The scope most ideally suited for use as part of a sniper team. The Mark 4 12-40x60mm Tactical spotting scope features either the Leupold Mil Dot “round dot” reticle or our Tactical Milling Reticle. Both help with range estimation, allowing the spotter and shooter to work as a team.
Multicoat 4 lens coatings – for maximum light transmission, brightness, clarity, and contrast.
Folded light path technology – for greater magnification in a lightweight, compact design (12.4" long, 37 oz).
Digital camera compatible – find your target, and our Digital Camera Adapter snaps on quickly so you can take your shot. See page 30.
Universal 1/4-20 thread tripod attachment.
Estimate range – at all power settings.
Includes soft-side case – it can remain on the scope during use, for extra protection.
New! Leupold 10x50mm Tactical Binocular
The Leupold 10x50mm Tactical binocular is a high performance, phase coated binocular with shock-absorbing coyote brown armor and an unexpected twist: a Mil Dot or Leupold TMR (Tactical Milling Reticle) you can rotate. The advantages are two-fold. Different users with different eye-spacing will be able to view the reticle horizontally, and it’s also incredibly useful in ranging an object that is not perfectly horizontal or vertical, allowing you to determine the range without tilting the entire binocular. Also available without a reticle.
Fully multi-coated lenses and aluminum-enhanced prisms – high photopic transmission for a bright image.
Phase coated BAK4/BK7 prisms – virtually eliminate residual diffraction for additional brightness and remarkable clarity.
Long eye relief and twist-up eyecups – easy to use with or without glasses.
Ergonomic body – well-balanced, it’s easy to grip, even with wet hands. Rugged and armored, waterproof and nitrogen-filled, they are protected against all field conditions.
Covered by the Leupold Limited Lifetime Warranty.
SPOTTING SCOPES & BINOCULARS
L E U P O L D M A R K 4 S P O T T I N G S C O P E S / L E U P O L D T A C T I C A L B I N O C U L A R S
L E U P O L D G O L D E N R I N G
Digital camera compatible – with our adapter. See page 30.
Index Matched Lens System – along with folded light path technology, it minimizes light dispersion and delivers maximum light transmission.
Leupold Golden Ring® 12-40x60mm Spotting Scope
The reticle and black finish of our Tactical spotting scope is all that separates it from the Golden Ring 12-40x60mm spotting scope. Compact and lightweight, it offers outstanding power and resolution.
Leupold Golden Ring® 10-20x40mm Compact Spotting Scope
High power in a package so small and so lightweight that you can wear it around your neck, or stow it in a cargo pocket or pack. Ideal when saving space is paramount.
7.5" long and weighs just 15.8 oz.
100 percent rugged and waterproof.
Can be used handheld or with a tripod.
Leupold Golden Ring® 15-30x50mm Compact Spotting Scope
Our newest Golden Ring spotting scope is powerful, with a maximum magnification of 30x, yet it’s a mere 11" long and weighs in at a trim 21.5 ounces. The combination gives you the power needed for long distances in a package small enough to carry on your belt.
Standard multicoated exterior lenses – for enhanced light management.
Sharp, bright image – across the visual field, even in low light.
100 percent rugged and waterproof.
Perfect for compact tripod mounting.
Leupold Golden Ring® 12-40x60mm HD Spotting Scope Kit
The 12-40x60mm HD Spotting Scope Kit includes the spotting scope, Leupold compact tripod, window mount with quick-release mounting platform and pan/tilt multi-directional head, the Leupold digital camera adapter, and a hard-side carrying case with molded padding.
Leupold Golden Ring® 15-30x50mm Compact Spotting Scope Kit
With this kit, you get the Leupold Golden Ring 15-30x50mm Compact spotting scope, a custom padded belt case, padded strap, mounting adapter, lens covers, a sturdy tabletop tripod, and durable, hard-shell case with custom-molded padding to keep everything in place.
L E U P O L D G O L D E N R I N G
21
LEUPOLD GOLDEN RING 15-30X50MM
COMPACT
Leupold Golden Ring® 12-40x60mm HD Spotting Scopes
This spotting scope takes the performance of the standard model to a new level.
The HD lens system – the fluoride-based objective lens system offers substantially enhanced resolution, color fidelity, and contrast, especially at 40x for sharper, better defined images.
Soft-side, form-fitting case – in brown, it comes with the scope to provide extra protection and can remain on the scope during use.
LEUPOLD GOLDEN RING 12-40X60MM HD
(ALSO AVAILABLE IN STANDARD GOLDEN RING MODEL)
LEUPOLD GOLDEN RING 10-20X 40MM
COMPACT
SPOTTING SCOPES SPOTTING SCOPES
LEUPOLD GOLDEN RING 12-40X60MM HD KIT
GOLDEN RING SPOTTING SCOPE FINISH & PART MODELS NUMBER
10-20X40MM COMPACT 61080
15-30X50MM COMPACT 6109015-30X50MM COMPACT KIT 61100
12-40X60MM 6105012-40X60MM HD 6106012-40X60MM HD KIT 61070
NEW FOR 2006
BROWN LEUPOLD GOLDEN RING 15-30X50MM COMPACT KIT
L E U P O L D G R E E N R I N GL E U P O L D G R E E N R I N G
23
New! Leupold Sequoia™ 20-60x80mm Spotting Scopes
Huge magnification range for incredible flexibility and capability, with wide field of view for spotting movement and targets.
Mammoth 80mm objective lens – along with fully multi-coated lenses, it ensures high photopic transmission in all conditions, for excellent resolution, contrast, and brightness.
Focus dial – placed atop the scope for easy adjustment while viewing.
Covered by the Limited Lifetime Warranty.
Rugged, armored, and waterproof.
Twist-up eyecups and long eye relief – makes extended viewing comfortable, even with glasses.
Leupold Sequoia™ 15-45x60mm Spotting Scopes
Incredibly powerful with a sharp, bright sight picture across the entire range of magnification.
Two models available – one with a straight eyepiece and a second with a 45˚ angled eyepiece for ease of use in a variety of positions.
Built for the field – rugged and absolutely waterproof and fog proof in all conditions.
Shock-absorbing armor – offers extra protection and a solid grip.
Long eye relief and twist-up eyecups – makes extended viewing comfortable, even with glasses.
Leupold Sequoia™ Spotting Scope Kits
All four Sequoia™ models are available in kits that include everything you need to head straight into the field:
Sequoia spotting scope – 15-45x60mm, 15-45x60mm Angled, 20-60x80mm, or 20-60x80mm Angled.
Heavy-duty neoprene protective cover.
Lightweight, compact tripod – multi-directional, tilting head, and adjustable legs with non-slip rubber feet.
Protective case – black matte diamond plate body and reinforced edges.
SPOTTING SCOPES SPOTTING SCOPES
SEQUOIA SPOTTING SCOPE PART MODELS FINISH NUMBER
15-45X60MM 5354615-45X60MM KIT 55886
15-45X60MM ANGLED 5453415-45X60MM ANGLED KIT 55888
20-60X80MM 6113020-60X80MM KIT 61135
20-60X80MM ANGLED 6115520-60X80MM ANGLED KIT 61160
NEW FOR 2006
BLACK ARMOR ON ALL MODELS
SEQUOIA 20-60X80MM KIT (KITS AVAILABLE IN ALL
FOUR SEQUOIA MODELS)
SEQUOIA 20-60X80MM
(ANGLED MODEL NOT SHOWN)
SEQUOIA 15-45X60MM
ANGLED
SEQUOIA 15-45X60MM
L E U P O L D G O L D E N R I N G
BINOCULARSL E U P O L D G R E E N R I N G
RANGEFINDERS
New! Leupold RX™ Series Rangefinders
Leupold’s new RX™ Series of digital laser rangefinders sets an entirely new standard for rangefinder function and performance. These are no glorified tape measures. All four models in the new RX Series are packed with features and functions that make every other rangefinder obsolete.
Match 13™ Reticle System™ – are included in each RX rangefinder, including the new Bracket Circle Duplex®, Bracket Square Duplex®, and others.
The Quick Set Rotary Menu™– gives you fast, one-handed access to all RX functions.
Incredibly accurate ranging – to within +/- 1 yard accuracy at all ranges, out to 1,500 yards.
True Ballistic Range™ – gives you seven ballistics groups to choose from based on your rifle’s caliber and bullet weight. Your RX then calculates the ballistic range to the target, shown as a holdover aim point, an MOA adjustment, or the Equivalent Horizontal Distance. With experience, it makes long range shooting incredibly accurate.
Other features include – Celsius/Fahrenheit temperature readings, a precision magnetic inductor compass, declination setting, line of sight distance, Long Range Mode, Rain Mode, and more.
Rugged and waterproof – it’s built to withstand the kind of abuse that’s common in the field.
Compact and lightweight – the ergonomic body is easy to grip in any conditions.
6x to 8x magnification – gives you plenty of power, as well as a wide field of view.
Leupold RB800C Range Finding Binocular
Accurate determination of range can be a lifesaver in some situations. The RB800C takes the guesswork out of it, giving you the precise distance to targets up to 850 meters away. An invaluable resource for military, police sniper/spotter teams, or even the cop on the street, the RB800C binoculars are powerful and lightweight enough for everyday duty.
8x32mm optical system gives you generous magnification; a bright, clear image; and an optimal field of view.
Tough, waterproof, with shock-absorbing armor for increased durability.
Scan mode lets you continuously update ranges of a moving target or as you scan different objects.
The built-in compass gives the direction to a target.
2524
RX-III RX-IV
Leupold Golden Ring® Binoculars
Leupold Golden Ring binoculars are the end result of nearly 100 years of experience. We put everything we know about optics into them.
Phase coated, super-high reflection prisms reduce refraction and deliver more useable light to your eye.
The Index Matched Lens System uses lens coatings specifically matched to each lens surface and glass type. The coatings are layered to minimize reflections and maximize the amount of usable light that reaches your eye. The result is a standard of brightness, clarity, and color fidelity like you’ve never seen before.
Ergonomic design makes them easy to grip; they actually feel more comfortable the longer you hold them.
Wider perspective with a field of view of up to 420 feet at 1,000 yards, for quick acquisition of targets, even in a cluttered urban environment.
Twist-up, retractable eyecups make them easy to use with eyeglasses.
Interpupillary Distance Lock (IPD) lets you set the eyepieces to match the distance between your eyes, then lock them in place, for easy, one-handed use, time after time.
Accessories included – all Golden Ring binoculars come with a neck strap, case, and custom one-piece eyepiece and objective covers.
LEUPOLD GOLDEN RING FINISH & BINOCULAR MODELS PART NUMBER
8X32MM 61400 10X32MM 61405 8X42MM 58630 10X42MM 58370
NEW FOR 2006
BROWN
GOLDEN RING SERIES
10X 42MM8X 42MM10X 32MM8X 32MM
RANGEFINDER MODELS
FEATURES RX-I RX-II RX-III RX-IV RB800C
FINISH & PART NUMBER
BLACK BLACK/GREY MOSSY OAK® OBSESSION™ CAMO MOSSY OAK® BRUSH™ CAMO
61450 61455
61460 61465 61470
61475 54580
MAGNIFICATION 6x 6x 8x 8x 8x
MAX RANGE REFLECTIVE TARGET (YD) 750 750 1200 1500 900
MAX RANGE LIVE TARGET (YD) 500 500 700 800 550
INCLINOMETER No Yes Yes Yes No
TBR™ (TRUE BALLISTIC RANGE™) No Yes Yes Yes No
MATCH 13™ RETICLE SYSTEM™ Yes Yes Yes Yes No
COMPASS W/ DECLINATION SETTING No No No Yes Yes
THERMOMETER °C & °F Yes Yes Yes Yes No
YDS/FT/METERS MODE Yds/M/Ft Yds/M/Ft Yds/M/Ft Yds/M/Ft Yds/M
SCAN MODE Yes Yes Yes Yes Yes
ILLUMINATED DISPLAY No No Yes Yes Yes
BATTERY LIFE (ACTUATIONS) 2,000 2,000 2,000 2,000 1,000
WEIGHT 6.8 oz 6.8 oz 12 oz 12 oz 23 oz
DIMENSION (INCHES) 4 x 3 x 1.5 4 x 3 x 1.5 4.6 x 3.5 x 2 4.6 x 3.5 x 2 5.4 x 6.0 x 2.8
WATER-RESISTANT/WATERPROOF Water-Resistant Water-Resistant Waterproof Waterproof Waterproof
NEW FOR 2006
RX-I
RB800C
RX SERIES – QUICK SET ROTARY MENU™
1 - LONG RANGE MODE
2 - RAIN MODE
3 - 1ST TARGET MODE
4 - LAST TARGET MODE
5 - DISTANCE OUTPUT (M, FT, YD)
6 - LINE OF SIGHT OUTPUT
7 - TEMPERATURE (ºC OR ºF)
8 - DIGITAL COMPASS MODE (RX-IV ONLY)
9 - DECLINATION ANGLE OUTPUT
10 - TRUE BALLISTIC RANGE™ OUTPUT
11 - BOW BALLISTIC GROUP
12 - BALLISTIC GROUPS A, B, AND C 13 - MATCH 13™ RETICLE SYSTEM™
1 2 3 4 5
6
7
12
11
10
9
8
13
RB800C – DISPLAY
1 - DIGITAL COMPASS 2- DISTANCE OUTPUT
(M, YD)
1
2
L E U P O L D G R E E N R I N G
RANGEFINDERS
RX-II RX-II RX-IV
L E U P O L D G R E E N R I N G
BINOCULARS
L E U P O L D G R E E N R I N G
BINOCULARS
Leupold Cascades™ Series
Camo available – Advantage Timber® HD™
camo finish is available on the 8x42mm and 10x42mm models.
Keep your focus – integrated center focus / lockable diopter control.
Excellent sight picture – the center focus design with coated roof prisms, for an exceptional image.
Slim, ergonomic in-line design – a natural fit in all hand sizes.
Easy extended viewing – with twist-up eyecups and ample eye relief.
New! Leupold Cascades™ Internal Focus Porro Prism Series
All the optical advantages of a Porro prism binocular, with a new internal-focusing mechanism normally found in roof prism binoculars.
Internal focusing – makes the Cascades™ smaller and more comfortable to use. With no moving exterior parts, this adds to their ruggedness and waterproof performance, as well.
Fully multi-coated optics – for clarity, color fidelity, contrast, and a bright sight picture in all conditions.
Outstanding 3D image representation – for which Porro prism binoculars are prized.
Leupold Mesa™ Series
Camo available – Advantage Timber® HD™
camo finish is available on the 8x42mm and 10x50mm models.
Classic design – center focus Porro prism binoculars with lockable focus dial.
Twist-up eyecups – comfortable to use even with glasses.
Leupold Mesa™ Compact Series
Ultra compact – inverted Porro prism design is slim and easy to grip.
Aspheric lenses – flat field of view.
Roll-down eyecups and ample eye relief – versatile even for users with glasses.
New! Leupold Yosemite™ Series
The Yosemite™ is designed to be small, lightweight, and comfortable enough for people with any size of hands to use.
Smaller interpupillary distance settings – accommodate a wide range of users.
6x magnification – gives an ideal combination of power and field of view. Eye relief is generous and forgiving, even with glasses.
Multi-coated optics – offer maximum brightness, clarity, and contrast.
Rugged and absolutely waterproof – they’re ready for all conditions.
Three finishes available – black, natural, or red.
26
Leupold Green Ring™ Binoculars
Leupold Green Ring™ optics are hard-working, rugged binoculars that perform well no matter the mission. Built solid with a rubber armor coating, they’re 100 percent waterproof, with crisp, bright sight pictures, even in low light.
Leupold Pinnacles™ Series
Excellent resolution – thanks to fully multi-coated lenses, and phase and L-coated™, silver enhanced roof prisms.
Interchangeable eyecups – quickly and easily switch between vented, retractable contoured eyecups and padded, twist-up eyecups.
Leupold Olympic™ Series
Camo available – Advantage Timber® HD™
camo finish is available on the 10x50mm model.
Outstanding clarity – with center focus, phase coated, roof prisms.
Comfortable extended viewing – with twist-up eyecups and generous eye relief.
Leupold Olympic™ Compact Series
Get the same outstanding performance and many of the same features as the full-size Olympics™, in an even lighter-weight package.
Leupold Katmai™ Series
The Katmai™ Series features a 32mm objective lens that gives you full-size optical performance in a compact, lightweight binocular.
Two finishes available – black or natural on the 6x32mm, 8x32mm, and 10x32mm models.
Compact size – full-size optical performance in a small package.
Phase and L-coated™ prisms and fully multi-coated lenses – unique coatings offer optimal light management and a bright, clear image.
The new natural armor color blends well with most camo patterns, and works in settings from urban to desert terrain.
LEUPOLD GREEN RING FINISH & BINOCULAR MODELS PART NUMBER
PINNACLES SERIES
8X42MM 54504 10X42MM 54514
OLYMPIC SERIES
8X42MM 54184 10X50MM 54205 56315 12X50MM 54524
OLYMPIC COMPACT SERIES
8X25MM 53538 10X25MM 53540
KATMAI SERIES
6X32MM 56410 61210 8X32MM 56420 61215 10X32MM 56430 61220
CASCADES SERIES
8X42MM INTERNAL FOCUS PORRO PRISM 60992 10X42MM INTERNAL FOCUS PORRO PRISM 60643 8X42MM 53530 57500 10X42MM 53532 57505
MESA SERIES
8X42MM 53694 56305 10X50MM 53696 56310
MESA COMPACT SERIES
8X23MM 53534 10X23MM 53536
YOSEMITE SERIES 6X30MM 61165 61170 61175
NEW FOR 2006
ADVANTAGE TIMBER® HD™ CAMO
BLACK NATURAL RED
YOSEMITE SERIES
6X30MM
MESA COMPACT SERIES
8X23MM 10X23MM
MESA SERIES
8X42MM 10X50MM
CASCADES INTERNAL FOCUS PORRO PRISM SERIES
CASCADES SERIES
8X42MM 10X42MM8X32MM 10X32MM6X32MM
KATMAI SERIES
OLYMPIC COMPACT SERIES
8X25MM 10X25MM8X42MM 10X50MM 12X50MM
OLYMPIC SERIES
TWIST-UP EYECUPS
8X42MMINTERNAL FOCUS
PORRO PRISM
10X42MMINTERNAL FOCUS
PORRO PRISM
PINNACLES SERIES
8X42MM 10X42MM
MOUNTING SYSTEMS
29
QR™ Mount (Quick Release™)
• Remove and reattach a scope using our QR™ mount and return to within half an inch of the original point-of-impact on the target
• Proven in extensive testing
QRW™ (Quick Release Cross-Slot Format)
• Steel detachable accuracy mounts that are based on the familiar cross-slot design
• Use the QRW mounts to achieve detachable accuracy
PRW™ Rings (Permanent Cross-Slot Format)
• Steel rings that are based on the proven cross-slot design
• Uses the Leupold QRW bases or any other Picatinny-style mounting rails
Why invest in a Leupold Mark 4 riflescope and then attach it to your rifle with a substandard mount? Leupold’s mounting systems are
as rugged and reliable as the Leupold scopes they’re intended to secure. No matter which mount you choose, you can count on it for
rock-solid dependability and tack-driving repeatable accuracy.
Mark 4 CQ/T ARMS™ Throw Lever Mount
Get a precise and repeatable zero every time with this quick-detaching mount for the Leupold Mark 4 CQ/T optical sight. With rugged, all-metal construction and a black, anti-glare matte finish, it’s ready to handle
any mission. Fits all MIL-STD-1913/ Picatinny-style rails.
Mark 4 AR-15/M16 Handle Mount
Securely attach your scope to any M16 variant with a carrying handle.
• Fit it into the sight channel of the carrying handle
• Delivers rock-solid stability for repeatable accuracy
Mark 4 CQ/T Flat Top Mounting Bracket
Secure your Mark 4 CQ/T scope to any Picatinny-style mounting rail using this specially designed mounting bracket.
PR MR/T LR/T
SCO
PE M
OD
EL
Mar
k 4
1.5-
5x20
mm
PR
Mar
k 4
3-9x
40m
m P
R
Mar
k 4
3.5-
10x4
0mm
PR
Mar
k 4
4.5-
14x4
0mm
PR
Long
Ran
ge
Mar
k 4
1.5-
5x20
mm
MR/
T M
2 Ill
umin
ated
Ret
icle
Mar
k 4
2.5-
8x36
mm
MR/
T M
1 &
M2
(& Il
lum
inat
ed R
eticl
e)
Mar
k 4
3-9x
36m
m M
R/T
M1
& M
3 (&
Illu
min
ated
Ret
icle)
Mar
k 4
3.5-
10x4
0mm
LR/
T M
1, M
2, &
M3
(& Il
lum
. Ret
icle,
& Fr
ont F
ocal
)
Mar
k 4
4.5-
14x5
0mm
LR/
T M
1 (&
Illu
min
ated
Ret
icle)
Mar
k 4
6.5-
20x5
0mm
LR/
T M
1 (&
Illu
min
ated
Ret
icle)
Mar
k 4
8.5-
25x5
0mm
LR/
T M
1 (&
Illu
min
ated
Ret
icle)
Mar
k 4
10x4
0mm
LR/
T M
1 &
M3
Mar
k 4
16x4
0mm
LR/
T M
1
Maximum Ring Spacing in InchesFIREARM BASE PART NO. 5.5 5.6 5.8 5.9 5.8 5.8 5.8 6.2 5.5 6.5 6.5 6.1 6.0Base Model Gloss Matte Recommended RingsSavage 110 through 116 (Left Hand, Long Action, Heavy Barrel)
STD 110 LH (1-Piece) 50219 — L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30QR 110 (2-Piece) 52314 — L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30QRW / PRW 110 (2-Piece) 49833 — L L L L30 L30 L30 L30 L30 M30 M30 M30 L30 L30
Savage 110 through 116 Round Receiver (Left Hand, Long Action, Heavy Barrel)STD 110 LH Round Receiver (1-Piece) 55711 — L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30STD 10/110 Round Receiver (2-Piece) 55741 55742 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30QR 10/110 Round Receiver (2-Piece) 55761 — L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30
Savage 10 through 16 (Right Hand, Short Action, Heavy Barrel)STD 10 RH-SA (1-Piece) 52326 52317 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30QR 110 (2-Piece) 52314 — L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30QRW / PRW 110 (2-Piece) 49833 — L L L L30 L30 L30 L30 L30 M30 M30 M30 L30 L30
Savage 10 through 16 Round Receiver (Right Hand, Short Action, Heavy Barrel)STD 10 RH-SA Round Receiver (1-Piece) 55721 55724 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30STD 10/110 Round Receiver (2-Piece) 55741 55742 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30QR 10/110 Round Receiver (2-Piece) 55761 — L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30
Savage 10 through 16 (Left Hand, Short Action, Heavy Barrel)STD 10 LH-SA (1-Piece) 52326 — L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30QR 110 (2-Piece) 52314 — L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30QRW / PRW 110 (2-Piece) 49833 — L L L L30 L30 L30 L30 L30 M30 M30 M30 L30 L30
Savage 10 through 16 Round Receiver (Left Hand, Short Action, Heavy Barrel)STD 10 LH-SA Round Receiver (1-Piece) 55731 — L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30STD 10/110 Round Receiver (2-Piece) 55741 55742 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30QR 10/110 Round Receiver (2-Piece) 55761 — L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30
Winchester 70, 670, 770, & 70A (Long Action) (serial number higher than 66,360)STD 70A (1-Piece) 50000 50001 M M M M30 M30 M30 M30 M30 H30 H30 H30 M30 M30STD 70 Long Range RH-LA (1-Piece) — 51736 M M M M30 M30 M30 M30 M30 H30 H30 H30 M30 M30STD 70 RVR (2-Piece) 50020 50021 L M M M30 L30 M30 M30 M30 H30 H30 H30 M30 M30STD 70 RVF/R (2-Piece) 50022 50023 L M M M30 L30 M30 M30 M30 H30 H30 H30 M30 M30DD 70 (2-Piece) 50045 50046 L M M M30 L30 M30 M30 M30 H30 H30 H30 M30 M30DD 70 RVF (2-Piece) — 54241 L M M M30 L30 M30 M30 M30 H30 H30 H30 M30 M30QR 70 (2-Piece) 50053 50054 L M M M30 L30 M30 M30 M30 H30 H30 H30 M30 M30QRW / PRW 70 (2-Piece) — 49838 L M M M30 L30 M30 M30 M30 H30 H30 H30 M30 M30Mark 4 70 (2-Piece) — 51731 M M M M30 M30 M30 M30 M30 SH30 SH30 SH30 M30 M30
Winchester 70, 670, 770, & 70A (Short Action) (serial number higher than 66,360)STD 70 Long Range RH-SA (1-Piece) — 51738 L M M M30 L30 M30 M30 M30 H30 H30 H30 M30 M30STD 70 RVR (2-Piece) 50020 50021 L M M M30 L30 M30 M30 M30 H30 H30 H30 M30 M30STD 70 RVF/R (2-Piece) 50022 50023 L M M M30 L30 M30 M30 M30 H30 H30 H30 M30 M30DD 70 (2-Piece) 50045 50046 L M M M30 L30 M30 M30 M30 H30 H30 H30 M30 M30DD 70 RVF (2-Piece) — 54241 L M M M30 L30 M30 M30 M30 H30 H30 H30 M30 M30QR 70 (2-Piece) 50053 50054 L M M M30 L30 M30 M30 M30 H30 H30 H30 M30 M30QRW / PRW 70 (2-Piece) — 49838 L M M M30 L30 M30 M30 M30 H30 H30 H30 M30 M30Mark 4 70 (2-Piece) — 51731 M M M M30 M30 M30 M30 M30 SH30 SH30 SH30 M30 M30
RM — RingmountPRW — Perma-Ring: Cross-slot formatDD — Dual DovetailQR — Detachable Accuracy: Quick Release Mount SystemQRW — Detachable Accuracy: Cross-slot formatSTD — Dovetail front and windage adjustable rear ring
Mount System TypesSH — Super high 1"SH30 — Super high 30mmH — High 1"H30 — High 30mmM — Medium 1"M30 — Medium 30mm
RingsL — Low 1"SL — Super low 1"HX — High 1" extensionMX — Medium 1" extensionLX — Low 1" extensionNA — Not available
◆ Indicates the correct ring to be used with this scope
LR — Long rear baseRVF — Reversible front baseRVR — Reversible rear baseRVF/R — Reversible front and rear base
LA — Long actionSA — Short actionRH — Right handLH — Left hand
Abbreviations
Tactical Wear
Show your knowledge and appreciation for outstanding optics when you wear Leupold Mark 4 Tactical Gear.
Caps
Each of these all-cotton caps is embroidered with the Leupold medallion on the front and the Mark 4 logo on the rear.
Khaki# 75044 - S/M # 75045 - L/XL
Loden Green # 75046 - S/M # 75047 - L/XL
T-Shirt
Our classic short-sleeved T-shirt, with custom, tactical team artwork on the back, and the Leupold logo on the chest.
Sand# 75060 - S # 75061 - M # 75062 - L # 75063 - XL # 75064 - XXL # 75065 - XXXL
Olive # 75066 - S # 75067 - M # 75068 - L # 75069 - XL # 75070 - XXL # 75071 - XXXL
Polo
Make your mark with this distinctive polo, embroidered with the Leupold Mark 4 logo on the chest.
Black# 75072 - S # 75073 - M # 75074 - L # 75075 - XL # 75076 - XXL # 75077 - XXXL
TACTICAL APPAREL
Long-Sleeved T-Shirt
Featuring custom artwork on the back, the Leupold logo on the chest, and Leupold and Mark 4 on the sleeves, you leave no doubts about your choice of optics.
Sand# 75048 - S # 75049 - M # 75050 - L # 75051 - XL # 75052 - XXL # 75053 - XXXL
Olive # 75054 - S # 75055 - M # 75056 - L # 75057 - XL # 75058 - XXL # 75059 - XXXL
NEW PRODUCTS ARE SHOWN IN RED
PR MR/T LR/T
SCO
PE M
OD
EL
Mar
k 4
1.5-
5x20
mm
PR
Mar
k 4
3-9x
40m
m P
R
Mar
k 4
3.5-
10x4
0mm
PR
Mar
k 4
4.5-
14x4
0mm
PR
Long
Ran
ge
Mar
k 4
1.5-
5x20
mm
MR/
T M
2 Ill
umin
ated
Ret
icle
Mar
k 4
2.5-
8x36
mm
MR/
T M
1 &
M2
(& Il
lum
inat
ed R
eticl
e)
Mar
k 4
3-9x
36m
m M
R/T
M1
& M
3 (&
Illu
min
ated
Ret
icle)
Mar
k 4
3.5-
10x4
0mm
LR/
T M
1, M
2, &
M3
(& Il
lum
. Ret
icle,
& Fr
ont F
ocal
)
Mar
k 4
4.5-
14x5
0mm
LR/
T M
1 (&
Illu
min
ated
Ret
icle)
Mar
k 4
6.5-
20x5
0mm
LR/
T M
1 (&
Illu
min
ated
Ret
icle)
Mar
k 4
8.5-
25x5
0mm
LR/
T M
1 (&
Illu
min
ated
Ret
icle)
Mar
k 4
10x4
0mm
LR/
T M
1 &
M3
Mar
k 4
16x4
0mm
LR/
T M
1
Maximum Ring Spacing in Inches
FIREARM BASE PART NO. 5.5 5.6 5.8 5.9 5.8 5.8 5.8 6.2 5.5 6.5 6.5 6.1 6.0Base Model Gloss Matte Recommended RingsColt AR15 & M16 (carry handle mount)
Mark 4 AR15 / M16 Handle Mount — 52136 L L L L30 L30 L30 L30 L30 L30 L30 L30 L30 L30Colt AR15 Flat Top (all AR15 style rifles with a flat top Picatinny rail)
Mark 4 1" Super High — 50222 ◆ ◆ ◆
Mark 4 30mm Super High — 52083 ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
Remington 700/721/725 (Long Action, Right Hand Only)STD 700 RH-LA (1-Piece) 50003 50004 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30STD 700 Long Range RH-LA (1-Piece) — 51732 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30
Remington 700/721/725 (Long Action, Left Hand Only)STD 700 LH-LA (1-Piece) 50007 — L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30
Remington 700/721/725 (All Long Action Models)STD 700 (2-Piece) 50015 50016 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30STD 700 RVF (2-Piece) 50017 50018 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30DD 700 (2-Piece) 50041 50042 L M M M30 L30 M30 M30 M30 H30 H30 H30 M30 M30DD 700 RVF (2-Piece) — 50044 L M M M30 L30 M30 M30 M30 H30 H30 H30 M30 M30QR 700 (2-Piece) 50049 50050 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30QRW / PRW 700 (2-Piece) 49840 49841 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30Mark 4 700 (2-Piece) — 50039 M M M M30 M30 M30 M30 M30 SH30 SH30 SH30 M30 M30
Remington 700/721/725 (Short Action, Right Hand Only)STD 700 RH-SA (1-Piece) 50005 50006 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30STD 700 Long Range RH-SA (1-Piece) — 51734 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30QR 700 RH-SA (1-Piece) — 51247 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30Mark 4 700 (1-Piece) — 50040 M M M M30 M30 M30 M30 M30 SH30 SH30 SH30 M30 M30DD XP-100 (1-Piece) — 53570 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30
Remington 700/721/725 (All Short Action Models) STD 700 (2-Piece) 50015 50016 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30STD 700 RVF (2-Piece) 50017 50018 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30DD 700 (2-Piece) 50041 50042 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30DD 700 RVF (2-Piece) — 50044 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30QR 700 (2-Piece) 50049 50050 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30QRW / PRW 700 (2-Piece) 49840 49841 L L L L30 L30 L30 L30 L30 M30 M30 M30 L30 L30Mark 4 700 (2-Piece) — 50039 M M M M30 M30 M30 M30 M30 SH30 SH30 SH30 M30 M30
Savage 110 through 116 (Right Hand, Long Action, Heavy Barrel)STD 110 RH (1-Piece) 49996 — L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30QR 110 RH (1-Piece) — 50066 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30QR 110 (2-Piece) 52314 — L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30QRW / PRW 110 (2-Piece) 49833 — L L L L30 L30 L30 L30 L30 M30 M30 M30 L30 L30
Savage 110 through 116 Round Receiver (Right Hand, Long Action, Heavy Barrel)STD 110 RH Round Receiver (1-Piece) 55701 — L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30STD 10/110 Round Receiver (2-Piece) 55741 55742 L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30QR 10/110 Round Receiver (2-Piece) 55761 — L L L L30 L30 L30 L30 L30 H30 H30 H30 M30 M30
Leupold Mark 4 Aluminum Rings
In the field, you count every ounce of weight, because you’ve got to carry it. Mark 4 Aluminum mounts are machined from a single piece of aircraft- grade aluminum, so they’re incredibly strong, yet lightweight.
Mark 4 Tactical Mounts
System employs a slot and spline design, and comes in 1-Piece and 2-Piece configurations.
• Mark 4 bases accept Mark 4 rings, cross-lot rings, and QRW™ / PRW™ rings
• Bases have a 1/4-degree slope for long range shooting applications
• Mark 4 Super High rings specifically designed for use with handle mounting configurations
• Mark 4 bases are available for nearly every long-range tactical weapon in use, including:
– Remington 700, 721, and 725 long and short action models
– Winchester Model 70, 670, 770, and 70A
– The Savage 110 through 116
– The Savage 10 through 16
– The Ruger M77
TACTICAL BASE FIT & RING HEIGHT INFORMATION
MOUNTING SYSTEMS TACTICAL BASE FIT & RING HEIGHT INFORMATION
TACTICAL APPAREL
31
TOOLS AND ACCESSORIES
30
TOOLS AND ACCESSORIES
Mark 4 Scope Cover
You’ve made an investment in the best...now protect it! The same as our other popular scope covers, designed specifically to fit our Mark 4 riflescopes. Easy to put on and remove, the black neoprene sleeve offers 6mm of thick protection for your scope from dirt and moisture.
MODEL SIZE PART NO.Mark 4 1.5-5x20mm PR Mark 4 – S 54857Mark 4 3-9x40mm PR Mark 4 – L 57868Mark 4 3.5-10x40mm PR Mark 4 – L 57868Mark 4 4.5-14x40mm PR Long Range Mark 4 – L 57868Mark 4 1.5-5x20mm MR/T M2 Illuminated Reticle Mark 4 – S 54857Mark 4 2.5-8x36mm MR/T M1 Mark 4 – M 57866Mark 4 2.5-8x36mm MR/T M2 Mark 4 – M 57866Mark 4 3-9x36mm MR/T M1 (& Illuminated Reticle) Mark 4 – M 57866Mark 4 3-9x36mm MR/T M3 (& Illuminated Reticle) Mark 4 – M 57866Mark 4 3.5-10x40mm LR/T M1 (& Illuminated Reticle) Mark 4 – X-L 57877Mark 4 3.5-10x40mm LR/T M1 Front Focal Mark 4 – X-L 57877Mark 4 3.5-10x40mm LR/T M2 Mark 4 – X-L 57877Mark 4 3.5-10x40mm LR/T M3 (& Illuminated Reticle) Mark 4 – X-L 57877Mark 4 3.5-10x40mm LR/T M3 Front Focal Mark 4 – X-L 57877Mark 4 4.5-14x50mm LR/T M1 (& Metric, & Illuminated Reticle) Mark 4 – L 57868Mark 4 6.5-20x50mm LR/T M1 (& Illuminated Reticle) Mark 4 – XX-L 57864Mark 4 8.5-25x50mm LR/T M1 (& Illuminated Reticle) Mark 4 – XX-L 57864Mark 4 10x40mm LR/T M1 Mark 4 – X-L 57877Mark 4 10x40mm LR/T M3 Mark 4 – X-L 57877Mark 4 16x40mm LR/T M1 Mark 4 – X-L 57877Mark 4 1-3x14mm CQ/T Mark 4 – S 54857
Retractable Ballistic Chart
Keep critical, custom ballistics data where you can access it from any shooting position. Attaches to your scope’s maintube (1" or 30mm) for instant access, and the durable metal tape with your ballistics data automatically retracts after use. MODEL PART NO.
Chart 1" 54804Chart 30mm 54778
Torx® Driver
Gives you a better handle on driving and securing Torx®-head mounting screws, which won’t strip like old-fashioned hex-head screws. #50818
LensPen
Has a natural hair brush which is fully retractable for protection when not in use. The microfiber cleaning tip automatically replenishes itself with cleaning compound. #48807
Mounting Tool
Features one slotted screwdriver, two Torx drivers, and five hex-head drivers. #52296
Leupold Green Ring Binocular Tripod Adapter
With the binocular tripod adapter, you can enjoy the same steady view with your binoculars that’s normally reserved for spotting scopes. Fit Mesa™, Pinnacles™, and Olympic 8x42mm models. #48826
Anti-Reflection Device (ARD)
A quarter-inch deep and perforated with scores of tiny, light-transmitting honeycomb baffles, the ARD reduces lens glare. #52292
Leupold Mark 4 Ring Torque Wrench
With this special wrench you can not only tighten, but loosen the mounting screws on Mark 4 style rings. Delivers the proper amount of torque value (65-in lbs) when installing Mark 4 style rings for return to zero accuracy. #48701
Leupold Zero Point Magnetic Illum. Boresighter
With this revolutionary boresighter, you can get your rifle on the paper faster than ever, recheck your zero, and even record the zero at different ranges or bullet weights, and readjust your scope without the need to fire. #59012
Compact Tripod
When a full-size tripod is just “too much equipment” to take into the field, our compact tripod gets the job done. The 4-section legs extend to 31.5"and collapses to a mere 15". The adjustable ball head with quick-release base gives you incredible viewing versatility. #56446
Leupold Digital Camera Adapter for Spotting Scopes
Capture images at long range using this adapter, your digital camera, and the Leupold Golden Ring 12-40x60mm spotting scope. The adapter itself snaps onto any digital camera with a 58mm lens. With the plates included with the kit, you can convert the adapter to fit 28mm, 37mm, 43mm, and 52mm digital camera lenses. #58380
Leupold Alumina™ Accessories System
Leupold is excited to introduce the Alumina™ accessories system: thread-on optical accessories that will help you use the light available to your advantage, protect your optics from dirt, dust, rough handling during transport, and even help them shed water when it’s raining.
MODEL PART NO.RainCote Kit 50mm - Matte Finish 59025RainCote Kit 40mm - Matte Finish 59020RainCote Kit 36mm - Matte Finish 59015RainCote Kit 20mm - Matte Finish 59005
RAINCOTE(OBJECTIVE)
RAINCOTE(EYEPIECE)
THREADED LENS COVER
ALUMINA RS STACKER
THREADED LENS COVER
Alumina RainCote® Kit
Specially coated, so that water instantly sheds off the lens surface, RainCote® lens protectors are included for both objective lenses and eyepieces. The Alumina RainCote Kit also includes the Alumina RS Stacker, a compact, protective storage device for the Alumina RainCote Kit components.
Alumina Protective Lens Covers
These machined-aluminum, knurled disks thread into your objective lens and eyepiece to protect your optics during storage or rough transport.
Fits 2004 and newer Mark 4 40mm and 50mm scopes
Pre-2004 Lens Shades
These 2.5" and 4" lens shades can be threaded together to create custom lengths. Models to fit 40mm objective scopes are available.
Fits all pre-2004 40mm Adj. Obj. scopes
MODEL PART NO.Alumina 50mm 2.5" - Matte Finish 52350Alumina 50mm 4" - Matte Finish 52353Alumina 40mm 2.5" - Matte Finish 56187Alumina 40mm 4" - Matte Finish 56190
MODEL PART NO.40mm 2.5" - Matte Finish 5234440mm 4" - Matte Finish 52347
Alumina Series Lens Shades
Thread these 2.5" and 4" Alumina lens shades together to create custom lengths.
MODEL PART NO.Threaded Lens Cover 50mm - Matte Finish 58950Threaded Lens Cover 40mm - Matte Finish 58940Threaded Lens Cover 36mm - Matte Finish 58935Threaded Lens Cover 20mm - Matte Finish 58925
Alumina Rubber Eyepiece Guard
Shades the eyepiece, and protects you from recoil during extreme uphill shooting angles and extremely heavy recoiling firearms.
MODEL PART NO.Rubber Eyepiece Guard Standard EP - Matte Finish 58965
Alumina Flip-Back Lens Covers
These machined-aluminum flip-back lens covers protect your lenses from the water, snow, dust, and dirt you encounter in the field, yet keep them ready for action at an instant’s notice.
EYEPIECE LENS COVER
OBJECTIVE LENS COVER
MODEL PART NO.Flip-Back Lens Cover 50mm - Matte Finish 59050Flip-Back Lens Cover 40mm - Matte Finish 59045Flip-Back Lens Cover 36mm - Matte Finish 59040Flip-Back Lens Cover 20mm - Matte Finish 59030
RETICLE CONFIGURATIONS
Circle Line:
The width of the line creating the circle is large enough to be easily visible but thin enough so as not to obliterate an 18-inch object at 500 yards when set on 3x.
3 MOA at 3x9 MOA at 1x
Dot Size:
Tactical Milling Reticle (TMR)
The Tactical Milling Reticle expands on existing Mil Dot reticles by using various sized and spaced hash marks on the vertical and horizontal stadia for increased ranging precision, accuracy, and quick 1-meter range estimating reference points. All Mil Dot calculations are TMR compatible. To use the system, simply determine the range to the target using the mil system, then, use the corresponding aiming point that is matched to your cartridge to engage the target.
5.00 MIL
0.20 MIL
0.50 MIL1.00 MIL
1 METER TARGETRANGING
500.0 METERS555.6 METERS625.0 METERS714.3 METERS833.3 METERS1000.0 METERS
DETAIL 2
1.00 MIL
DETAIL 1
0.40 MIL
0.15 MIL
CENTER APERTURE IS0.18 x 0.18 MIL FOR 8X AND 9X0.14 x 0.14 MIL FOR 10X0.10 x 0.10 MIL FOR 14X AND 40X0.09 x 0.09 MIL FOR 16X0.07 x 0.07 MIL FOR 20X0.06 x 0.06 MIL FOR 25X
ALL FINE LINES ARE 0.06 MIL FOR 8X 0.05 MIL FOR 10X 0.04 MIL FOR 14X 0.03 MIL FOR 16X, 20X AND 40X 0.02 MIL FOR 25X
APPROXIMATE HOLDOVER VALUESACTUAL VALUES WILL
VARY BY +/- 20 METERSTHESE HOLDOVERS CAN BE
APPLIED TO ANY CARTRIDGE
SS109 5.56 X 45MM 62gr. 2800 FPS
M118LR 7.62 X 51MM
175gr. 2600 FPS
350 METERS
550 METERS
650 METERS
750 METERS
850 METERS
350 METERS
550 METERS
700 METERS
850 METERS
950 METERS
HOLDOVER CONCEPT, 5.56mm and 7.62mm:
200 METERS
300 METERS
400 METERS
500 METERS
200 METERS
300 METERS
400 METERS
500 METERS
APPROXIMATE HOLDOVER VALUESACTUAL VALUES WILL
VARY BY +/-25 METERSTHESE HOLDOVERS CAN BE
APPLIED TO ANY CARTRIDGE
MK 262 MOD 0/1 AA535.56mm 77gr.
M118LR AA117.62mm 175gr.
Mil Dot
Several Leupold riflescopes are available with the Mil Dot reticle, which was designed to help the U.S. Marine Corps estimate distances. It’s now standard for all military branches.
Range Estimating with the Mil Dot Reticle:
With practice, the Mil Dot system is simple to use. Dots are spaced in one mil (milliradian) increments on the crosshair. Using the mil formula, the shooter can create a table based on the known size of the object targeted. Just look through the scope, bracket the object between dots, and refer to the table for an estimated distance to the target. Leupold scopes fitted with the Mil Dot reticle include more specific instructions on its use.
1 mil
5 mil
1 mil
1 mil
0.20 mil
0.80 mil
0.90 mil
Target Dot
This is a conventional shooter’s dot, which seems to “float.” The crosshairs are extremely thin.
CQ/T Illuminated Circle Dot
The Circle Dot reticle is designed to offer fast target acquisition in any environment. It can also be used to estimate range.
Range Estimating with the Circle Dot Reticle:
Estimating range using the Circle Dot reticle is simple. Place the target inside the circle of the reticle. At 3x the diameter equates to 6 feet in height at 100 yards. At 200 yards, 6 feet is measured from the dot to the edge of the circle.
Duplex®
Leupold invented the Duplex design more than 35 years ago. Heavy posts stand out against cover and in twilight conditions, pointing boldly to the intersection. Centering is a snap. The thin crosshairs obscure little.
CENTER DOT IS0.30 MILS
5.0 MILS
ALL FINE LINES ARE0.10 MILS
0.30 MILS
0.50 MILS
DETAIL
2.5 MILS
Fine Duplex
Thinner posts and crosshairs allow for less target coverage, making precision shots on small targets easy.
CQT Illuminated Circle Dot
(when illuminated)
Illuminated Circle Dot
(when not illuminated)
We’re proud to offer a wide selection of reticles, in a variety of riflescopes, designed to help
you achieve your goals in nearly any type of shooting, from plinking to competition, and
hunting to tactical environments. Several reticles are available as illuminated reticle options.
Some are exclusive to certain riflescope lines. If you don’t see the reticle you prefer listed as
available in a particular scope, contact the Leupold Custom Shop for information on custom
reticle installation.
Special Purpose Reticle (SPR)
With the Special Purpose Reticle, you can engage targets with greater precision at longer ranges than generally possible with other reticle styles, yet also use it for instinctive, close-range/low-magnification engagements. It also features several methods of accurate range estimation, using the height or width of the target as a guide. To use the system, simply determine the range to the target using the mil system, then, use the corresponding aiming point that is matched to your cartridge to engage the target. For targets that are inside 300 yards, simply use the center aiming dot to engage.
SPR HOLDOVER VALUES
TMR HOLDOVER VALUES
Circle Size: From edge to edge of circle–Subtension of circle at 3x: 18 inches at 25 yards, 6 feet at 100 yards
Circle Size: From center of dot to edge of circle–Subtension of circle at 3x: 6 feet at 200 yards
100m 200m 400m 100m 200m 400m 200m 400m 800m
TORSO & HEAD BODY LENGTH SHOULDERS
RANGE ESTIMATING METHODS
Note: Subtension values are in inches at 100 yards and cm at 100 meters.* Available in illuminated reticle.
IlluminatedTMR
Illuminated Mil Dot
IlluminatedSPR
32 33
RETICLE CONFIGURATIONS
Illuminated Duplex
TACTICAL RETICLE SUBTENSIONS Scope Type PR CQ/T MR/T LR/TScope Model 1.5-5 3-9 3.5-10* 4.5-14* 1-3 1.5-5 2.5-8 3-9* 3.5-10* 4.5-14* 6.5-20 8.5-25 10 16Power Setting 1.5 5 3 9 3.5 10 4.5 14 1 3 1.5 5 2.5 8 3 9 3.5 10 4.5 14 6.5 20 8.5 25 10 16
Fine Duplex
Heavy Section
inch — — — — — — 0.8 0.3 — — — — — — — — — — — — — — — — — —
cm — — — — — — 2.2 0.7 — — — — — — — — — — — — — — — — — —
Thin Section
inch — — — — — — 0.3 0.1 — — — — — — — — — — — — — — — — — —
cm — — — — — — 0.8 0.3 — — — — — — — — — — — — — — — — — —
Thin Opening
inch — — — — — — 16.1 5.4 — — — — — — — — — — — — — — — — — —
cm — — — — — — 44.7 14.9 — — — — — — — — — — — — — — — — — —
Duplex Heavy Section
inch — — 2.2 0.8 2.1 0.7 1.5 0.5 — — — — — — 2.2 0.8 2.1 0.7 0.4 0.1 — — — — 0.7 0.4
cm — — 6.1 2.3 5.9 2.0 4.1 1.4 — — — — — — 6.1 2.3 5.9 2.0 1.2 0.4 — — — — 1.9 1.2
Thin Section
inch — — 0.7 0.3 0.7 0.2 0.5 0.2 — — — — — — 0.7 0.3 0.7 0.2 0.1 0.0 — — — — 0.2 0.1
cm — — 2.0 0.9 1.9 0.6 1.3 0.4 — — — — — — 2.0 0.9 1.9 0.6 0.4 0.1 — — — — 0.6 0.4
Thin Opening
inch — — 16.3 6.2 16.1 5.4 16.1 5.4 — — — — — — 16.3 6.2 16.1 5.4 4.7 1.6 — — — — 14.3 14.4
cm — — 45.4 17.2 44.8 15.0 44.8 15.0 — — — — — — 45.4 17.2 44.8 15.0 13.1 4.5 — — — — 39.8 40.0
Target Dot
Dot inch — — — — — — — — — — — — — — — — — — — — — — — — — 0.4
cm — — — — — — — — — — — — — — — — — — — — — — — — — 1.0
Illum. Circle Dot
Circle Inside
inch — — — — — — — — 212.5 72.3 — — — — — — — — — — — — — — — —
cm — — — — — — — — 590.4 200.7 — — — — — — — — — — — — — — — —
Circle Line Width
inch — — — — — — — — 3.6 1.2 — — — — — — — — — — — — — — — —
cm — — — — — — — — 9.9 3.3 — — — — — — — — — — — — — — — —
Dot inch — — — — — — — — 9.2 3.1 — — — — — — — — — — — — — — — —
cm — — — — — — — — 25.6 8.7 — — — — — — — — — — — — — — — —
1 On all fixed power scopes, dimension “E” is measured from the back of the eyepiece to the beginning of the eyepiece tube threads.2 On all scopes with adjustable objectives, dimension “G” is measured over the knurled ring.4 Dimensions “A” and “E” may vary according to the focusing position of the eyepiece.
SCOPE DIMENSIONS
DIAGRAM #2
BF
C D
E
H
▲
▲
A
▲
▲
G
▲
▲
▲
▲
▲
▲
▲▲
▲▲
▲
▲
▲
▲
I
34 35
SPECIFICATIONS
Actual Magnification
Linear Field of ViewAngular Field of
View Weight Length Objective
Aperture Twilight Factor
Exit Pupil
Eye Relief
Interpupillary Distance
Close Focus
Distance
ft/1000 yd m/1000 m degrees ounce gram inches mm mm mm mm mm ft mmLeupold Golden Ring Binoculars
8x32mm 8x 420 140 8.0 27.0 765 5.2 132 32 16.0 4.0 17.5 56 - 72 4.9 1.510x32mm 10x 356 119 6.8 27.1 768 5.2 132 32 17.9 3.2 14.7 56 - 72 4.9 1.58x42mm 8x 381 127 7.3 33.1 938 6.0 152 42 18.3 5.3 16.5 56 - 72 7.0 2.110x42mm 10x 340 113 6.5 33.8 958 6.0 152 42 20.5 4.2 16.0 56 - 72 7.0 2.1
Leupold Golden Ring Spotting Scopes10-20x40mm Compact 10.0x - 19.9x 199 - 136 66 - 45 3.8 - 2.6 15.8 447 7.5 191 40 20.0 - 28.3 4.0 - 2.0 18.5 - 17.2 NA 5.5 1.715-30x50mm Compact 15.2x - 30.4x 136 - 89 45 - 30 2.6 - 1.7 21.5 610 11.0 279 50 27.6 - 39.0 3.3 - 1.6 17.5 - 17.1 NA 13.5 4.112-40x60mm 12.7x - 38.1x 168 - 52 56 - 18 3.2 - 1.0 37.0 1049 12.4 315 60 26.8 - 48.9 4.8 - 1.5 30.0 - 30.0 NA 36.0 11.012-40x60mm HD 12.7x - 38.1x 168 - 52 56 - 18 3.2 - 1.0 37.0 1049 12.4 315 60 26.8 - 48.9 4.8 - 1.5 30.0 - 30.0 NA 36.0 11.0
Leupold Tactical Binoculars10x50mm Tactical 10x 262 87 5.0 25.7 729 6.7 170 50 22.4 5.0 18.0 60 - 70 10.5 3.210x50mm Tactical w/ Mil Dot 10x 262 87 5.0 25.7 729 6.7 170 50 22.4 5.0 18.0 60 - 70 10.5 3.210x50mm Tactical w/ TMR 10x 262 87 5.0 25.7 729 6.7 170 50 22.4 5.0 18.0 60 - 70 10.5 3.2
Leupold Mark 4 Spotting Scopes12-40x60mm Tactical w/ Mil Dot 12.7x - 38.1x 168 - 52 56 - 18 3.2 - 1.0 37.0 1049 12.4 315 60 26.8 - 48.9 4.8 - 1.5 30.0 - 30.0 NA 36.0 11.012-40x60mm Tactical w/ TMR 12.7x - 38.1x 168 - 52 56 - 18 3.2 - 1.0 37.0 1049 12.4 315 60 26.8 - 48.9 4.8 - 1.5 30.0 - 30.0 NA 36.0 11.0
Leupold Green Ring Pinnacles Series Binoculars8x42mm 8x 341 114 6.5 23.0 652 5.5 138 42 18.3 5.3 17.8 60 - 70 6.6 2.010x42mm 10x 267 89 5.1 25.0 708 5.5 138 42 20.5 4.3 16.5 60 - 70 6.6 2.0
Leupold Green Ring Olympic Series Binoculars8x25mm Compact 8x 273 91 5.2 14.8 420 4.9 124 25 14.1 3.1 16.5 60 - 70 8.2 2.510x25mm Compact 10x 262 87 5.0 14.8 420 4.9 124 25 15.8 2.5 15.5 60 - 70 9.8 3.08x42mm 8x 325 108 6.2 21.8 619 5.7 146 42 18.3 5.3 18.0 60 - 70 7.5 2.310x50mm 10x 262 87 5.0 25.7 728 6.7 170 50 22.4 5.0 18.0 60 - 70 10.5 3.2
12x50mm 12x 252 84 4.8 25.7 730 6.6 167 50 22.5 4.0 15.5 60 - 70 13.1 4.0
SPECIFICATIONS
Actual Magnification
Linear Field of ViewAngular Field of
View Weight Length Objective
Aperture Twilight Factor
Exit Pupil
Eye Relief
Interpupillary Distance
Close Focus Distance
ft/1000 yd m/1000 m degrees ounce gram inches mm mm mm mm mm ft mmLeupold Green Ring Katmai Series Binoculars
6x32mm 6x 425 142 8.1 18.2 515 4.1 105 32 13.9 5.3 19.2 57 - 72 4.9 1.58x32mm 8x 335 112 6.4 18.9 535 4.1 105 32 16.0 4.0 15.9 57 - 72 4.9 1.510x32mm 10x 272 91 5.2 18.2 515 4.1 105 32 17.9 3.2 10.2 57 - 72 4.9 1.5
Leupold Green Ring Cascades Series Binoculars8x42mm 8x 341 114 6.5 22.9 650 5.5 140 42 18.3 5.0 18.0 58 - 72 9.9 3.08x42mm Int. Focus Porro 8x 336 110 6.4 24.9 706 5.0 127 42 18.3 5.25 18.0 56 - 73 10.8 3.2710x42mm 10x 267 89 5.1 23.1 656 5.5 140 42 20.5 4.0 16.0 58 - 72 9.9 3.010x42mm Int. Focus Porro 10x 272 90 5.2 25.4 720 5.0 127 42 20.5 4.2 16.0 56 - 73 11.1 3.36
Leupold Green Ring Mesa Series Binoculars8x23mm Compact 8x 336 112 6.4 13.2 375 4.2 107 23 13.5 2.5 9.0 60 - 70 9.8 3.010x23mm Compact 10x 262 87 5.0 13.2 375 4.2 107 23 15.2 2.0 9.0 60 - 70 9.8 3.08x42mm 8x 341 114 6.5 26.5 750 5.2 132 42 18.3 5.0 18.0 60 - 70 16.4 5.010x50mm 10x 288 96 5.5 32.3 917 6.5 166 50 22.4 4.9 18.0 60 - 70 29.5 9.0
Leupold Green Ring Yosemite Series Binoculars6x30mm 6x 420 140 8.0 17.0 482 4.6 117 30 13.4 5.0 20.0 50 - 70 16.4 5.0
Leupold Green Ring Range Finding BinocularsRB800C 8x32mm w/ compass 8x 314 105 6.0 23.0 652 5.4 138 32 16.0 4.0 16.0 58 - 72 19.7 6.0
Leupold RX Series RangefindersRX-I 6x 325 100 6.0 6.8 193 4.0 102 23 11.7 3.8 21.0 NA 18.0 6.0RX-II 6x 325 100 6.0 6.8 193 4.0 102 23 11.7 3.8 21.0 NA 18.0 6.0RX-III 8x 236 71.5 4.5 12.0 340 4.7 119 28 15.0 3.5 16.0 NA 18.0 6.0 RX-IV 8x 236 71.5 4.5 12.0 340 4.7 119 28 15.0 3.5 16.0 NA 18.0 6.0
Leupold Green Ring Sequoia Spotting Scopes15-45x60mm 15x - 45x 131 - 63 44 - 21 2.5 -1.2 35.1 995 13.0 331 60 30.0 - 52.0 3.9 - 1.3 16.5 - 13.0 NA 29.9 9.115-45x60mm Angled 15x - 45x 131 - 63 44 - 21 2.5 -1.2 35.1 995 12.5 317 60 30.0 - 52.0 3.9 - 1.3 16.5 - 13.0 NA 29.9 9.1 20-60x80mm 20x - 60x 99.6 - 33.2 30 -10 1.9 - 0.09 62.8 1780 15.9 400 80 40.0 - 69.3 3.9 - 1.3 19.9 - 15.0 NA 30.0 9.1420-60x80mm Angled 20x - 60x 99.6 - 33.2 30 -10 1.9 - 0.09 62.8 1780 15.9 317 80 40.0 - 69.3 3.9 - 1.3 19.9 - 15.0 NA 30.0 9.14
NEW PRODUCTS ARE SHOWN IN RED
DIAGRAM #1 (Mark 4® CQ/T® 1-3x14mm)
▲
▲
▲
▲
▲
▲
H▲
▲
B
▲
▲
E
▲
▲
A
IG
6 On CQ/T, dimension is measured from where mounting foot rests on the base.* BDC (Bullet Drop Compensation) Dial** Elevation and windage adjustment ranges are the distance from one extreme of the adjustment to the other.
PRODUCT ORDERINGPRODUCT ORDERING
LEUPOLD MARK 4 RIFLESCOPES PART NO.
MARK 4 Finish
DuplexFine
DuplexTarget
DotMil Dot
Illum. Duplex
Illum. Mil Dot
Illum. Circle Dot SPR
Illum. SPR
TMR
Illum. TMR
1.5-5x20mm PR Matte — — — — — — — 59100 — — —3-9x40mm PR Matte 56860 — — 56870 — — — — — —3.5-10x40mm PR Matte 56125 — — 56120 — — — — — — —4.5-14x40mm PR Long Range Matte 56140 56145 — 56130 — — — — — — —1-3x14mm CQ/T Matte — — — — — — 52155 — — — —1.5-5x20mm MR/T M2 Matte — — — — — — — — 56994 — —2.5-8x36mm MR/T M1 Matte — — — 60205 — 60190 — — — 60210 602202.5-8x36mm MR/T M2 Matte — — — 60160 — 60150 — — — 60180 601703-9x36mm MR/T M1 Matte 57080 — — 57070 57060 57050 — — — 60055 600453-9x36mm MR/T M3 Matte — — — 57075 — 57055 — — — 60060 600503.5-10x40mm LR/T M1 Matte 52218 — — 52128 53666 53668 — — — 60020 600103.5-10x40mm LR/T M2 Dark Earth — — — — — — — — — — 621503.5-10x40mm LR/T M3 Matte 51182 — — 51850 53670 53672 — — — 60025 600153.5-10x40mm LR/T M1 Front Focal Matte — — — 58850 — — — — — 60030 —3.5-10x40mm LR/T M3 Front Focal Matte — — — 58860 — — — — — 60035 —4.5-14x50mm LR/T M1 Matte 54660 — — 54560 56060 56070 — — — 60005 600004.5-14x50mm LR/T M1 Metric Matte — — — — — 57045 — — — — —6.5-20x50mm LR/T M1 Matte — — — 54680 — 56080 — — — 60080 600758.5-25x50mm LR/T M1 Matte — — — 54690 — 56090 — — — 60070 6006510x40mm LR/T M1 Matte 45578 — — 48431 — — — — — 60085 —10x40mm LR/T M3 Matte 45582 — — 47638 — — — — — 60090 —16x40mm LR/T M1 Matte 45580 — 45581 50541 — — — — — 60095 —
LEUPOLD BINOCULARS AND SPOTTING SCOPES FINISH & PART NO. GOLDEN RING BINOCULARS Brown
8x32mm 6140010x32mm 614058x42mm 5836010x42mm 58370
GOLDEN RING SPOTTING SCOPES Brown12-40x60mm 6105012-40x60mm HD 6106012-40x60mm HD Kit 6107010-20x40mm Compact 6108015-30x50mm Compact 6109015-30x50mm Compact Kit 61100
MARK 4 SPOTTING SCOPES Black12-40x60mm Tactical w/ Mil Dot 5375612-40x60mm Tactical w/ TMR 60040
GREEN RING YOSEMITE BINOCULARS Black Red Natural6x30mm 61165 61170 61175
GREEN RING MESA BINOCULARS Black Camo8x23 Compact 53534 —10x23 Compact 53536 — 8x42mm 53694 5630510x50mm 53696 56310
GREEN RING CASCADES BINOCULARS Black Camo8x42mm 53530 575008x42mm Internal Focus Porro Prism 60992 — 10x42mm 53532 5750510x42mm Internal Focus Porro Prism 60643 —
GREEN RING OLYMPIC BINOCULARS Black Camo8x25mm Compact 53538 —10x25mm Compact 53540 — 8x42mm 54184 —10x50mm 54205 5631512x50mm 54524 —
GREEN RING KATMAI BINOCULARS Black Natural6x32mm 56410 612108x32mm 56420 61215 10x32mm 56430 61220
GREEN RING PINNACLES BINOCULARS Black8x42mm 5450410x42mm 54514
GREEN RING RB800C RANGE FINDING BINOCULARS BlackRB800C 8x32 Range Finding Binocular w/Compass 54580
GREEN RING SEQUOIA SPOTTING SCOPES Black15-45x60mm 5354615-45x60mm Angled 5453415-45x60mm Kit 5588615-45x60mm Angled Kit 5588820-60x80mm 6113020-60x80mm Kit 6113520-60x80mm Angled 6115520-60x80mm Angled Kit 61160
LEUPOLD BINOCULARS FINISH & PART NO.TACTICAL BINOCULARS RETICLE Coyote Brown
10x50mm Tactical Mil Dot 5912510x50mm Tactical TMR 5913010x50mm Tactical — 59120
ACCESSORIESSCOPE COVERS PART NO.
Mark 4 – S 54857Mark 4 – M 57866Mark 4 – L 57868Mark 4 – X-L 57877Mark 4 – XX-L 57864
LEUPOLD RANGEFINDERSRANGEFINDERS FINISH RETICLE PART NO.
RX-I Rangefinder Black Match 13™ Reticle System™ 61450RX-II Rangefinder Black/Grey Match 13™ Reticle System™ 61455RX-II Rangefinder Mossy Oak Obsession Match 13™ Reticle System™ 61460RX-III Rangefinder Black Match 13™ Reticle System™ 61465RX-IV Rangefinder Black/Grey Match 13™ Reticle System™ 61470RX-IV Rangefinder Mossy Oak Brush Match 13™ Reticle System™ 61475
ACCESSORIES BINOCULARS AND SPOTTING SCOPES PART NO.
Green Ring Binocular Tripod Adapter 48826Window Mount 58400Compact Tripod 56446Shoulder Pod 4864312-40x60mm Spotting Scope Soft Case 5371512-40x60mm Spotting Scope Digital Camera Adapter 58380Quick Release Binocular Harness 55895
NEW PRODUCTS ARE SHOWN IN RED
BULLET DROP COMPENSATION OPTIONS
ACCESSORIES SCOPE ACCESSORIES PART NO.
ARD (Anti-Reflection Device) 52292LensPen 48807Zero Point Illuminated Magnetic Boresighter 59012Mounting Tool 52296Ring Wrench 48762Torx Driver 50818Retractable Ballistic Chart 1-inch 54804Retractable Ballistic Chart 30mm 54778Threaded 50-Ft Focus Adapter (Pre-2004) 31685Torx® Screw Kit 52395CQ/T Battery Pack 52644Mark 4 Ring Torque Wrench 48701
Contacting Leupold Technical ServiceLeupold & Stevens, Inc. • P.O. Box 688 • Beaverton, OR 97075-0688 Phone: (503) 526-1400 – 8:00 a.m.- 4:30 p.m. PST M-F Fax: (503) 352-7621 24 hours a day, seven days a week E-mail: [email protected]
To locate dealers near you, call the Leupold Authorized Dealer Network at 1 (800) 929-4949 or visit our Web site at www.leupold.com.
To find great places to shoot in your area, visit www.wheretoshoot.org.
To send a product to Leupold Product Service: By Parcel Service: Leupold & Stevens, Inc. Attn: Product Service Dept. 14400 NW Greenbrier Parkway Beaverton, OR 97006-5790 USA
Customers in Canada may send their products to Leupold Canada for service: Leupold Canada • Jim Korth Agencies, Ltd 103 Stockton Point • Box 490 • Okotoks, AB T1S 1A7, Canada Tel: (403) 938-3255 • FAX: (403) 938-2722 • E-mail: [email protected]
By Mail: Leupold & Stevens, Inc. Attn: Product Service Dept. P.O. Box 688 Beaverton, OR 97075-0688 USA
Many Leupold Mark 4 riflescopes feature Bullet Drop Compensation Dials. If yours doesn’t, let the Leupold Custom Shop put 50+ years of scopesmithing experience to work, adding custom Bullet Drop Compensation (BDC) dials to your Leupold riflescope. Fill out our ballistics worksheet (available at www.leupold.com) with your ballistics data, and we will, in turn, create a precision laser engraved dial that allows you to adjust for bullet impact at extremely long range.
The positive “click” adjustment dials are made of aircraft-grade aluminum, with the appropriate ranges clearly and accurately laser engraved on the dial. Simply determine range to the target then adjust to the corresponding mark on the elevation dial to achieve startling long range precision. In addition to the precision laser-engraving, Leupold adjustment dials are double O-ring sealed against the moisture, dust, and sand you’ll encounter in the field. They also give you superior repeatable adjustment, virtually free of accuracy-degrading backlash or overtravel.
This is a simple, yet extremely valuable modification to your riflescope that will prove its worth immediately in the field.
BULLET DROP COMPENSATION OPTIONS
AVAILABLE DIALS FOR M1, M2, AND M3 ADJUSTMENTSM2 LOW PROFILE MARK 4 VARIABLES (1.5-5x20mm MR/T only)
Blank 1/2-MOA Elevation Dial (No BDC Info) 1/2-MOA Windage Dial5.56mm / .223 Rem7.62mm / .308 Win
M2 TALL MARK 4 VARIABLESBlank 1/2-MOA Elevation Dial (No BDC Info)1/2 MOA Windage Dial5.56mm / .223 Rem7.62mm / .308 Win
M3 MARK 4 FIXED POWERBlank 1-MOA Elevation Dial (No BDC Info)1/2-MOA Windage Dial5.56mm / .223 Rem7.62mm / .308 Win.30-06300 Win Mag.338 Lapua
M3 MARK 4 VARIABLESBlank 1-MOA Elevation Dial (No BDC Info)1/2-MOA Windage Dial5.56mm / .223 Rem7.62mm / .308 Win.30-06.300 Win Mag.338 Lapua.50 Cal
COMING SOONAdditional .50 Cal6.8mm.408 CheytacSee the Leupold Web site at www.leupold.com for more information.
BULLET DROP COMPENSATION OPTIONS
SCOPE DIMENSIONS
SPECIFICATIONS
Maximum Range
Minimum Range
yards meters yards meters
Leupold Green Ring Range Finding Binoculars
RB800C 8x32mm w/ compass 800 731.5 10 9.1
Leupold RX Series Rangefinders
RX-I 750 685.8 3 2.7RX-II 750 685.8 3 2.7RX-III 1,200 1,097.3 3 2.7RX-IV 1,500 1,371.6 3 2.7
RANGEFINDER MAXIMUM AND MINIMUM RANGES
RANGEFINDER MAXIMUM AND MINIMUM RANGES
SPECIFICATIONS
Actual Magnification
Linear Field of View Optimum Eye Relief Objective Clear Aperture Weight
Elevation Adjustment
Range*
Windage Adjustment
Range** Dimensions (inches unless otherwise stated) ft at 100 yd m at 100 m inch mm
A4 B 6 C D E1, 4 F G H I 6 Low High Low High Low High Low High Low High inch mm ounce gram MOA MOALeupold Mark 4 Long Range / Tactical (LRT)
10x40mm LR/T M1 13.1 6.1 2.3 2.2 2.7 4.3 2.0 1.7 30mm 10.0 — 11.1 — 3.7 — 3.4 — 86 — 1.6 40 21.0 595 90 60 10x40mm LR/T M3* 13.1 6.1 2.3 2.2 2.7 4.3 2.0 1.7 30mm 10.0 — 11.1 — 3.7 — 3.4 — 86 — 1.6 40 21.0 595 75 5216x40mm LR/T M1 13.1 6.0 3.1 1.4 2.7 4.3 2.0 1.7 30mm 15.6 — 6.8 — 2.3 — 4.0 — 101 — 1.6 40 22.5 638 140 453.5-10x40mm LR/T M1 13.5 6.2 2.4 2.4 3.2 4.3 1.8 1.6 30mm 3.2 9.5 29.9 11.0 10.0 3.7 4.7 3.4 119 93 1.6 40 19.5 553 65 653.5-10x40mm LR/T M1 Ill. Ret. 13.5 6.2 2.4 2.4 3.2 4.3 1.8 1.7 30mm 3.2 9.5 29.9 11.0 10.0 3.7 4.7 3.4 119 93 1.6 40 21.0 595 65 653.5-10x40mm LR/T M1 Front Focal 13.5 6.2 2.4 2.4 3.2 4.3 1.8 1.6 30mm 3.2 9.5 29.9 11.0 10.0 3.7 4.7 3.4 119 93 1.6 40 19.5 553 65 653.5-10x40mm LR/T M2 13.5 6.2 2.4 2.4 3.2 4.3 1.8 1.6 30mm 3.2 9.5 29.9 11.0 10.0 3.7 4.7 3.4 119 93 1.6 40 19.5 553 65 653.5-10x40mm LR/T M3* 13.5 6.2 2.4 2.4 3.2 4.3 1.8 1.6 30mm 3.2 9.5 29.9 11.0 10.0 3.7 4.7 3.4 119 93 1.6 40 19.5 553 65 653.5-10x40mm LR/T M3* Ill. Ret. 13.5 6.2 2.4 2.4 3.2 4.3 1.8 1.7 30mm 3.2 9.5 29.9 11.0 10.0 3.7 4.7 3.4 119 93 1.6 40 21.0 595 65 653.5-10x40mm LR/T M3* Front Focal 13.5 6.2 2.4 2.4 3.2 4.3 1.8 1.6 30mm 3.2 9.5 29.9 11.0 10.0 3.7 4.7 3.4 119 93 1.6 40 19.5 553 65 654.5-14x50mm LR/T M1 12.5 5.5 1.6 2.4 3.2 3.7 2.3 1.6 30mm 4.8 14.3 19.0 7.6 6.3 2.5 4.5 3.6 113 93 2.0 50 22.0 624 100 1004.5-14x50mm LR/T M1 Ill. Ret. 12.8 5.5 1.6 2.4 3.2 3.7 2.3 1.7 30mm 4.8 14.3 19.0 7.6 6.3 2.5 4.5 3.6 113 93 2.0 50 22.0 624 100 1004.5-14x50mm LR/T M1 Ill. Ret. (metric) 12.8 5.5 1.6 2.4 3.2 3.7 2.3 1.7 30mm 4.8 14.3 19.0 7.6 6.3 2.5 4.5 3.6 113 93 2.0 50 22.0 624 100 1006.5-20x50mm LR/T M1 14.5 6.5 2.6 2.4 3.2 4.9 2.3 1.6 30mm 6.5 19.5 14.3 5.5 4.8 1.8 4.4 3.6 111 93 2.0 50 22.0 624 70 706.5-20x50mm LR/T M1 Ill. Ret. 14.4 6.5 2.6 2.4 3.2 4.9 2.3 1.7 30mm 6.5 19.5 14.3 5.5 4.8 1.8 4.4 3.6 111 93 2.0 50 22.0 624 70 708.5-25x50mm LR/T M1 14.5 6.5 2.6 2.4 3.2 4.9 2.3 1.6 30mm 8.2 25.1 11.2 4.4 3.7 1.4 5.3 3.7 134 94 2.0 50 22.5 638 75 708.5-25x50mm LR/T M1 Ill. Ret. 14.4 6.5 2.6 2.4 3.2 4.9 2.3 1.7 30mm 8.2 25.1 11.2 4.4 3.7 1.4 5.3 3.7 134 94 2.0 50 22.5 638 75 70
Leupold Mark 4 Mid Range / Tactical (MR/T) 1.5-5x20mm MR/T M2 9.3 5.8 2.1 2.5 3.1 — 1.2 1.7 30mm 1.5 4.5 65.7 23.7 7.9 21.9 4.4 3.6 112 91 0.8 20 15.0 425 120 1202.5-8x36mm MR/T M1 11.3 5.8 1.9 2.4 3.1 2.6 1.7 1.7 30mm 3.0 8.7 35.5 13.6 11.7 4.5 3.7 3.0 93 76 1.4 36 16.0 454 90 902.5-8x36mm MR/T M2 11.3 5.8 1.9 2.4 3.1 2.6 1.7 1.7 30mm 3.0 8.7 35.5 13.6 11.7 4.5 3.7 3.0 93 76 1.4 36 16.0 454 90 903-9x36mm MR/T M1 11.3 5.8 1.9 2.4 3.1 2.6 1.7 1.7 30mm 3.0 8.7 35.5 13.6 11.7 4.5 3.7 3.0 93 76 1.4 36 16.0 454 90 903-9x36mm MR/T M1 Ill. Ret. 11.3 5.8 1.9 2.4 3.1 2.6 1.7 1.7 30mm 3.0 8.7 35.5 13.6 11.7 4.5 3.7 3.0 93 76 1.4 36 16.0 454 90 903-9x36mm MR/T M3* 11.3 5.8 1.9 2.4 3.1 2.6 1.7 1.7 30mm 3.0 8.7 35.5 13.6 11.7 4.5 3.7 3.0 93 76 1.4 36 16.0 454 90 903-9x36mm MR/T M3 Ill. Ret.* 11.3 5.8 1.9 2.4 3.1 2.6 1.7 1.7 30mm 3.0 8.7 35.5 13.6 11.7 4.5 3.7 3.0 93 76 1.4 36 16.0 454 90 90
Leupold Mark 4 Precision Rifle (PR) 1.5-5x20mm PR 9.3 5.5 2.0 3.3 3.1 — 1.0 1.6 1.0 1.5 4.7 65.7 23.9 21.9 7.9 4.4 3.6 113 93 0.8 20 9.7 275 80 803-9x40mm PR 12.3 5.6 2.3 2.2 3.1 3.5 1.8 1.6 1.0 3.3 8.6 32.9 13.0 11.0 4.4 4.3 3.2 108 82 1.6 40 13.0 369 56 563.5-10x40mm PR 12.6 5.8 2.3 2.4 3.2 3.5 1.8 1.6 1.0 3.3 9.6 29.6 11.0 9.9 3.6 4.4 3.7 113 93 1.6 40 13.5 383 57 574.5-14x40mm PR Long Range 12.6 5.4 1.8 2.3 3.2 4.0 2.0 1.6 30mm 4.9 14.6 18.6 7.3 6.2 2.4 4.4 3.7 113 93 1.6 40 16.0 454 100 100
Leupold Mark 4 Close Quarter / Tactical (CQ/T) 1-3x14mm CQT 8.8 1.6 — — 3.0 — 1.2 1.5 2.9 1.0 2.9 112.0 4.10 37.5 13.9 2.8 2.0 71 51 0.6 14 17.5 496 90 90
MARK 4 SCOPE SPECIFICATIONS
BINOCULAR, SPOTTING SCOPE AND RANGEFINDER SPECIFICATIONS