Protecting your fibre, for secure communication 100 x 100 100 100 1800 Material: UL94/V0, Zero...
Transcript of Protecting your fibre, for secure communication 100 x 100 100 100 1800 Material: UL94/V0, Zero...
Protecting your fibre, for secure communicationCanovate Duct is a flexible duct system for fibre optic cables specifically produced and designed for both the European and US Market. The system is fully enclosed protecting the fibre from dirt and dust, the duct is strong enough to protect cables against the most rigorous of conditions. It is manufactured from a Halogen free, flame-retardant UL94/V0 plastic. The product is designed to meet material specifications required throughout Europe. • The system is easy to assemble. The only tools required are a drill, a screwdriver and a saw to cut the channels to length. The system is designed for speed of installation and minimum labour for the installer. • The easy access covers allows fibre optic cables to be installed or removed at any time without the need to disconnect the whole system. • The system is extremely adapt-able and will evolve to suit this demanding market. Currently it is supplied in three sizes: 50mm x 50mm, 100mm x 100mm and 200mm x 100mm. Canovate offer a complete design package to assist you with the layout of your ducting system.
The company is committed to delighting the customer andexcelling in each of three key area’s.ServiceA demanding market requires fast solutions, to meet this challenge we believe that:• All standard product should be available within 24 hours from order.• If special solutions are required they will be available in 14 days.Product Technically advanced communications equipment needs superb ancillarysupport therefore:• We will design product that surpasses the latest standards at the lowest possible cost.• Continuous improvement will be at the forefront of our design strategy to continually inno-vate in our market.PeopleTo support the ideals of the company and the future needs of the customer we will invest in:• Relationships with our customers so we anticipate their requirements and have a solution available before it is requested. • Our people, will be competent to meet and surpass the requirements of the customer.
www.canvoate.com
System Overview
90º Horizontal ElbowPart Nos.CF-90HB-55YPCF-90HB-1010YPCF-90HB-2010YP
Fibre Raceway Outlet (FRO)Part No.CF-FDT-1010YP / G-FRO-001
Vertical (Drop) Tee & Tee ReducerPart Nos.CF-VT-55YPCF-VT-1010YPCF-VTRD-1155YPCF-VTR-2111YP
FixingsPart Nos.CF-CBNK-20CF-CB-20CF-N-MetalCF-FCM10-Y
Horizontal TeePart Nos.CF-HT-55YPCF-HT-1010YPCF-HT-2010YP
www.canvoate.com
45º Vertical Outside (down)ElbowPart Nos.CF-45VOB-55YPCF-45VOB-1010YPCF-45VOB-2010YP
90º Vertical Inside (up) ElbowPart Nos.CF-90VIB-55YPCF-90VIB-1010YPCF-90VIB2010YP
45º Vertical Inside (up) ElbowPart Nos.CF-45VIB-55YPCF-45VIB-1010YPCF-45VIB-2010YP
ReducerPart Nos.CF-RE-1155YPCF-RE-2111YP
Duct and Lid 1.2m & 1.8m lengthsPart Nos.CF-SD12-55YP, CF-SD12-1010YPCF-SD12-2010YPCF-SD18-55YP, CF-SD18-1010YP
4 Way CrossPart Nos.CF-4WC-5555YPCF-4WC-1111YPCF-4WC2121YP
Horizontal Tee &Tee ReducerPart Nos.CF-HT-55YPCF-HT-1010YPCF-HT2010YPCF-HTR-1155YPCF-HTR-2111YP
www.canvoate.com
Table of Contents
Section
1. Duct
2. Horizontal Elbows
3. Vertical Elbows
4. Tee’s & Tee Reducers
5. 4 Way Cross
6. Reducers
7. End Fittings
8. Splices
9. Excess Fibre Stor
10.Fibre Raceway Outlet
11. Converters
12.Brackets and Fixings
13. Labels
Material: UL94/V0, Zero Halogen. Colour: Standard yellow.
Other colours on request.All dimensions are for reference only.
Finish: Smooth
Duct 1.2mPart Number A B CCF-SD12-2010YP 200 x 100 200 100 1200
Duct 1.8mPart Number A B CCF-SD18-55YP 50 x 50 50 50 1800CF-SD18-1010YP 100 x 100 100 100 1800
Material: UL94/V0, Zero Halogen. Colour: Standard yellow.
Other colours on request.All dimensions are for reference only.
Finish: HaircellDimensions in mm.
www.canvoate.com
Cut out size: 50 x 50mm - 25mm (h) x 32mm(w)100 x 100mm - 70mm (h) x 32mm(w)
The number of cut outs is proportional to duct size and pitch.
Material: UL94/V0, Zero Halogen. Colour: Standard yellow.
Other colours on request.All dimensions are for reference only.
Finish: Smooth Dimensions in mm.
Slotted Duct 1.8mPart Number Pitch A B CCF-SDC18-55-YP 50 x 50 100 50 50 1800CF-SD50C18-55-YP 50 x 50 50 50 50 1800
CF-SDC18-1010-YP 100 x 100 100 100 100 1800
CF-SD50C-1010YP 100 x 100 50 100 100 1800
Notes: relating all products Material: UL94/V0, Zero Halogen.
Colour: Standard yellow. Other colours on request.All dimensions are for reference only.
Finish: all outside surfaces have a haircell texture. All parts have predrilled fastening holes.
Dimensions in mm.
45º Horizontal Elbow Part Number A BCF-45HB-55YP 50 x 50 60 65CF-45HB-1010YP 100 x 100 110 110
CF-45HB-2010YP 200 x 100 210 110
90º Horizontal ElbowPart Number A B CCF-90HB-55YP 50 x 50 130 130 65CF-90HB-1010YP 100 x 100 195 195 110
CF-90HB-2010YP 200 x 100 340 340 110
Notes: relating all products Material: UL94/V0, Zero Halogen.
Colour: Standard yellow. Other colours on request.All dimensions are for reference only.
Finish: all outside surfaces have a haircell texture. All parts have predrilled fastening holes.
Dimensions in mm.
45º Vertical Inside (up) ElbowPart Number A BCF-45VIB-55YP 50 x 50 60 60CF-45VIB-1010YP 100 x 100 110 110CF-45VIB-2010YP 200 x 100 110 210
45º Vertical Outside (down) ElbowPart Number A BCF-45VOB-55YP 50 x 50 60 60CF-45VOB-1010YP 100 x 100 110 110CF-45VOB-2010YP 200 x 100 110 210
www.canvoate.com
Notes: relating all products Material: UL94/V0, Zero Halogen.
Colour: Standard yellow. Other colours on request.All dimensions are for reference only.
Finish: all outside surfaces have a haircell texture. All parts have predrilled fastening holes.
Dimensions in mm.
90º Vertical Inside (up) ElbowPart Number A BCF-90VIB-55YP 50 x 50 125 60CF-90VIB-1010YP 100 x 100 190 110CF-90VIB-2010YP 200 x 100 190 210
90º Vertical Outside(down) ElbowPart Number A BCF-90VOB-55YP 50 x 50 125 60CF-90VOB-1010YP 100 x 100 190 100CF-90VOB-2010YP 200 x 100 190 210
Horizontal TeePart Number A B CCF-HT-55YP 50 x 50 130 210 60CF-HT-1010YP 100 x 100 200 280 110
CF-HT-2010YP 200 x 100 340 470 110
Notes: relating all products Material: UL94/V0, Zero Halogen.
Colour: Standard yellow. Other colours on request.All dimensions are for reference only.
Finish: all outside surfaces have a haircell texture. All parts have predrilled fastening holes.
Dimensions in mm.
Vertical TeePart Number A B CCF-VT-55YP 50 x 50 60 195 60
CF-VT-1010YP 100 x 100 110 280 110
100 to 50mm Horizontal Tee ReducerPart Number A B CCF-HTR-1155YP 100 x 100 180 235 110
200 to 100mm Horizontal Tee ReducerPart Number A B CCF-HTR-2111YP 200 x 100 270 270 110
Notes: relating all products Material: UL94/V0, Zero Halogen.
Colour: Standard yellow. Other colours on request.All dimensions are for reference only.
Finish: all outside surfaces have a haircell texture. All parts have predrilled fastening holes.
Dimensions in mm.
www.canvoate.com
Notes: relating all products Material: UL94/V0, Zero Halogen.
Colour: Standard yellow. Other colours on request.All dimensions are for reference only.
Finish: all outside surfaces have a haircell texture. All parts have predrilled fastening holes.
Dimensions in mm.
Vertical Tee Reducer 200 to 100mmPart Number A B C DCF-VTR-2111YP 200 to 100 240 370 210 110
Vertical Tee Reducer 100 to 50mmPart Number A B C DCF-VTRD-1155YP 100 to 50 110 280 110 55
4 Way CrossPart Number A B CCF-4WC-5555YP 50 x 50 195 195 65CF-4WC-1111YP 100 x 100 275 275 110
CF-4WC-2121YP 200 x 100 470 470 110
Notes: relating all products Material: UL94/V0, Zero Halogen.
Colour: Standard yellow. Other colours on request.All dimensions are for reference only.
Finish: all outside surfaces have a haircell texture. All parts have predrilled fastening holes.
Dimensions in mm.
Notes: relating all products Material: UL94/V0, Zero Halogen.
Colour: Standard yellow. Other colours on request.All dimensions are for reference only.
Finish: all outside surfaces have a haircell texture. All parts have predrilled fastening holes.
Dimensions in mm.
Reducer 100 to 50mmPart Number A B C D ECF-RE-1155YP 100 to 50 60 60 90 100 110
Reducer 200 to 100mmPart Number A B C D ECF-RE-2111YP 200 to 100 110 110 150 210 110
End CapPart Number A B CCF-EC-55YP 50 x 50 60 60 30CF-EC-1010YP 100 x 100 110 110 30
CF-EC-2010YP 200 x 100 110 210 30
www.canvoate.com
TrumpetPart Number A B CCF-TR-55YP 50 x 50 90 100 100CF-TR-1010YP 100 x 100 90 150 195CF-TR-2010YP 200 x 100 90 150 295
Notes: relating all products Material: UL94/V0, Zero Halogen.
Colour: Standard yellow. Other colours on request.All dimensions are for reference only.
Finish: all outside surfaces have a haircell texture. All parts have predrilled fastening holes.
Dimensions in mm.
4 Sided TrumpetPart Number A B CCF-TR4-55YP 50 x 50 90 135 135CF-TR4-1010YP 100 x 100 90 195 195CF-TR4-2010YP 200 x 100 90 195 295
Notes: relating all products Material: UL94/V0, Zero Halogen.
Colour: Standard yellow. Other colours on request.All dimensions are for reference only.
Finish: all outside surfaces have a haircell texture. All parts have predrilled fastening holes.
Dimensions in mm.
Ducting SplicePart Number A B CCF-DS-55YP 50 x 50 35 60 70CF-DS-1010YP 100 x 100 75 110 100
CF-DS-2010YP 200 x 100 75 210 100
Fitting SplicePart Number A B CCF-FS-55YP 50 x 50 50 50 50CF-FS-1010YP 100 x 100 90 100 70CF-FS-2010YP 200 x 100 90 200 70
Notes: relating all products Material: UL94/V0, Zero Halogen.
Colour: Standard yellow. Other colours on request.All dimensions are for reference only.
Finish: all outside surfaces have a haircell texture. All parts have predrilled fastening holes.
Dimensions in mm.
Excess Fibre Storage DuctPart Number A B C DCF-EFSD-2010YP 200 x 100 100 200 1200 80
Notes: relating all products Material: UL94/V0, Zero Halogen.
Colour: Standard yellow. Other colours on request.All dimensions are for reference only.
Finish: all outside surfaces have a haircell texture. All parts have predrilled fastening holes.
Dimensions in mm.
B D
C
A
www.canvoate.com
ConvertersPart Number From Canovate duct to:CF-ADAC-1010YP Canovate duct 100mm to ADC 6” Converter
Duct to Duct with ADC ConnectorCF-ADTE-1010YP Canovate duct 100mm to Telect 100mm Converter
Duct to Duct with Telect ConnectorCF-ADWB-1010YP Canovate duct 100mm to Warren and Brown/Ray Duct
100mm
Notes: relating all products Material: UL94/V0, Zero Halogen.
Colour: Standard yellow. Other colours on request.All dimensions are for reference only.
Finish: all outside surfaces have a haircell texture. All parts have predrilled fastening holes.
Dimensions in mm.
Each converter is engineered toaccept changes in profile from oneproduct to another.
Material: Mild Steel, 4mm thick x 25mm wide
Zinc Plated and Passivated.
All dimensions are for reference only.
Dimensions in mm.
Universal Bracket KitsPart Number Description Min MaxCF-UBKS-5511 Bracket Kit Short 134 224CF-UBKM-5511 Bracket Kit Medium 130 370CF-UBKL-5511 Bracket Kit Long 370 600
Ladder Rack Bracket KitsPart Number Description Min MaxCF-LRKS-5511 Bracket Kit Short 113 233CF-LRKL-5511 Bracket Kit Long 100 265
Short & short universal bracket in floor mounting mode
Short & long universal bracket in ceiling mounting mode
Ladder Rack bracket with short universal bracket
Ladder Rack bracket with long universal bracket
Under Floor Mounting KitPart Number A B C D ECF-UFMK-5511 70 130 25 MAX M6 75
Direct Ladder Rack Mounting BracketPart Number A BCF-DLRB-100 100 25
Material: Mild Steel, Zinc Plated and
Passivated.All dimensions are for
reference only. Dimensions in mm.
www.canvoate.com
Fixings
Material: Black Plastic.Pack Size: 100 pieces.All dimensions are for
reference only. Dimensions in mm.
Material: Steel, Zinc Plated and Passivated.Cap: Yellow PVC
Pack Size:100 piecesAll dimensions are for
reference only. Dimensions in mm.
Part Number DescriptionCF-CBNK-20 M6 x 20mm Coach Bolt, Flange Nut KitCF-CB-20 M6 x 20mm Coach BoltCF-N-Metal M6 Flange NutCF-FCM10-Y Bolt and Nut Cap
Coach Bolt
Hex Nut / Washer
Cap
RivetsPart Number DescriptionCF-PBR-B Plastic Barbed Rivet
Ø6.35
Ø19.05
www.canvoate.com