Protecrete Solutions for Buildings and Maintenance 2015
-
Upload
david-johnson -
Category
Documents
-
view
57 -
download
5
Transcript of Protecrete Solutions for Buildings and Maintenance 2015
Solutions for Buildings and MaintenanceAll Green Chemical Solutions, Llc.
Why Protecrete products?
• Highly innovative, unique products which will modernize your concrete and building materials
• 25-year-old company with proven track record of project successes
• Specified by major companies and governments, like Disney, Populous, U.S. Federal and state DOTs, Japanese government (10-year test results)
• Environmentally friendly: low to no VOCs
• Strategies to lower construction and maintenance costs
Solving Moisture ProblemsDensifier, Densifier plus Repeller, Densifier for Rebar, Radiance (Matte or Glossy)
Moisture ProblemsEliminating water and vapor penetration through concrete foundations/supports, floors, walls and roofs
Of course, the picture on the left shows there are some moisture problems even we can’t solve . . .
Problem: Moisture Migration through Concrete
• Concrete absorbs ground and airborne water
• Wall & roof water penetration
• Creates slip & fall exposure
• Damages floors and contents
• Corrodes rebar
• Deteriorates concrete
• Fosters mildew growth
• Produces unattractive appearance
Solution: Moisture Remediation
1. Clean off any surface sealers, waxes, mop & glow type products, etcetera on the floor
2. Waterproof inside of concrete with Densifier Penetrates up to 4-6 inches into concrete depending on porosity Permanently binds with free lime Fills capillaries and micro-channels to prevent transmission of water
3. Seal surface of concrete (different appearance options available) Repeller – breathable, invisible waterproof barrier Radiance (Matte or Glossy) – waterproof membrane for decorative appearance
4. Makes polishing and cleaning easier
Product Definitions
Densifier: Waterproofs and dustproofs concrete – from
the inside out. A permanent non-soluble, lithium-
colloidal gel that will last the life of the concrete. Best to
use an airless paint spray on application.
Product Definitions
Densifier plus Repeller: Repels water, oils, coolants,
acids, and most chemicals. For newly placed, green
concrete only. Will cure, harden and seal — all in one
application — as soon as the finisher is done with
placement.
Product Definitions
Densifier for Rebar: Penetrates deeply into the concrete
with a corrosion inhibitor to help prevent (further)
corrosion of the rebar — without removing the old
concrete to get to the rebar.
Product Definitions
Radiance (Matte or Glossy): Protective water-cured
membrane with attractive matte or glossy finish for a
wide variety of surfaces, including concrete, masonry,
drywall and wood. An excellent anti-graffiti coating.
Fixing Moisture Problems in SubfloorsFloor Saver System: Parts One and Two
Delaminating Floors and Moisture RemediationWe give an industry-leading 20-year warranty
Problem: Remediating Water-damaged Floors
Billions of dollars every year in insurance claims and costs to repair floors damaged by water:
• Moisture rising through unsealed slabs• Rain water contamination• Broken pipe flooding• Disaster flooding
Adhesives are readily destroyed by moisture and water which create catastrophic failure
Solution: Floors treated with Floor Saver System
Nearly unheard of 20-year warranty (with a perfect track record of success – “no loss” history whatsoever)
Prevents water from seeping up through the concrete and dissolving the adhesive and ruining the flooring material
Ultra fast, often same day full application means you can have a completely replaced floor overnight
How Floor Saver System Works
1. Strip or scarify floor to remove existing covering/coating and any remove any remaining adhesive (mechanically strip or strip with Potecrete PowerStrip).
2. Apply Floor Saver Part One using airless paint sprayer. Dries in 30-45 minutes.
3. Apply Floor Saver Part Two using roller, squeegee or sprayer. Ready for adhesive in 45 minutes to 1 hour.
4. Install new floor according to manufacturer’s specifications.
Product Definitions
Floor Saver – Part 1: Warrantied waterproofing system for portland cement concrete subfloors. Travels 4-6 inches into the substrate to provide an internal moisture barrier to ensure the floor will not fail due to moisture concerns.
Floor Saver – Part 2: Provides a very fast (15-30 minutes) optimum water cured finish and moisture barrier for adhesive bondability. Increases durability and decreases concrete permeability.
The Floor Saver System is environmentally friendly and easy to apply.
Installation Assistance
Customer Application: Many of the products can applied by the end user. We offer training and support to help our customers properly apply the products.
Job Site Assistance: We provide application support upon request.
Certified Applicators: Our certification program approves applicators for our products, including the Floor Saver System.
Documentation of application details
Testing to verify knowledge of application and product issues
Certificate for successful completion of training and demonstration of product knowledge.
Decorative Concrete SurfacesPermaStain, PermaPaint, PermaMetallic, PermaIR
Decorative Concrete FloorsLifetime color that doesn’t wear off
Creating a Decorative Floor. . . can be a challenge!
Protecrete Permanent Colors
Lithium coatings provide a brand new technology with
penetrating, permanent colors for concrete floors and walls.
They molecularly bond for life to masonry, brick and
concrete floors and walls. They never peel or blister.
50+ year life expectancy.
Protecrete Permanent Colors
PermaPaint (opaque)
Eliminates epoxy issues – No peeling
Hard wearing surface (actually hardens the concrete)
PermaStain (semi-transparent) eliminates acid stains
PermaMetallic makes surfaces look like metal
PermaIR (Infrared) lowers temperature of concrete surfaces
by 20% – i.e., pool decks, exterior stucco and concrete walls
PermaPaintWall panels, we also have the technology to produce any type of form for your next projects
PermaStainPlus PermaPaint and PermaMetallicfinishes
PermaStainplus PermaMetallic
PermaMetallicWall panels, we also have the technology to produce any type of form for your next projects
PermaMetallicand PermaStain applied to black slate
PermaPaint
Before After
PermaPaintIn progress
PermaPaintCompleted project
Perma Color Chart – 1 of 2
Perma Color Chart – 2 of 2
Easy Care Glossy FloorsDensifier, Radiance
Protecrete’s Easy Care Glossy Floors
Apply Densifier to a clean bare concrete surface. On
existing floors, contaminants may purge to the surface.
The surface must then be cleaned before the application
of Redeemer.
Roll on Radiance at the rate of 400 sq ft per gallon.
While it is still wet, buff with a red pad until dry. A
second application may be necessary to get a brighter
shine.
Protecrete’s Easy Care Glossy Floors
Heavy duty: suitable for forklift traffic and parking garage use
Incredibly resistant to oils, brake fluids, Skydrol and other chemicals
100% UV stable – will not yellow
Very hard, with amazing scratch resistance
Anti-Graffiti coating
Safe for concrete countertops inside or outside (heat tested to 500 degrees) – USDA approved
No hot tire pick up
Easy Care Glossy FloorsBeautiful floors that last
Easy Care Glossy FloorsInterior or exterior applications
Easy Care Glossy FloorsPool decks with PermaPaint IR
GraffitiPowerStripper, Densifier, Radiance
GraffitiNew solutions for a very old problem, providing easier removal and protecting against future vandalism
Some kids learn graffiti. . . at a very early age
Graffiti
“Graffiti is a crime . . . Graffiti is ugly . . . It comes in all
shapes and colors and can be found on buildings, highways,
fences and other surfaces. It’s often done without permission,
and it’s against the law. Graffiti is an eyesore that decreases
property values, is a drain on tax dollars, and makes residents
feel unsafe.”
Source: http://www.houstontx.gov/graffiti/
The Graffiti Solution: Removal
PowerStripper: Non-hazardous, water-soluble paint stripping
solution. Softens coatings by expanding the molecules so that coating can be removed easily. Will not burn the person applying it. PS works on conventional water-based and solvent-based paints, varnishes and sealers, as well as urethane and epoxy formulations.
Despite the fact PS contains no highly toxic solvents or caustics, it retains benefits associated with each. Long lasting so, like caustics, it is able to remove multiple layers of built up coatings without rapidly evaporating and losing its strength.
The Graffiti Solution: Future Protection
Densifier is applied after the graffiti is removed.
Radiance provides a hard non-removable sealer which
protects the surface and seals the pores. The sealer can
be cleaned with any cleaning solution, allowing easy
removal of future graffiti damage.
Fresh Solutions for Fresh ConcreteMWC10.0 and M-Cast 64
New ConcreteSolving problems before they start
MWC10.0: A High Performance Pre-Additive
• MWC10.0 is a pre-additive which is added to the water at the batch plant before the cement, aggregate, and admixtures are added. This product creates a gel that controls segregation and stratification of aggregate, and virtually eliminates all bleed water. It hydrates the lime much more completely and provides a more impermeable and durable high performance concrete.
• It also provides impressive results for integral color concrete. MWC10.0 stops the bleed water and solves a host of problematic issues with colored concrete including the mottling and color inconsistencies created by bleed water.
MWC10.0: A High Performance Pre-Additive
High performance concrete at a minimal cost
Increases hydration of the cementitious particles
Improved microstructure with no segregation
Controls bleed water
Ease of placement and faster finishing
Improves concrete pumping
Less plastic shrinkage, cracking, and curling
Tightens the capillaries, yet allows the concrete to breathe
Improved durability
Greater density and less permeability
Reduced efflorescence
MWC10.0: A High Performance Pre-Additive
Superior freeze-thaw resistance
Promotes chemical and mechanical bonding to steel
Improves rebar protection
Higher compressive strength
Increased flexural and tensile strength
Reduced honeycombing, delamination, laitance, and dusting
Lower heat of hydration
Higher acid/chemical resistance
Reduces water absorption – lower water permeability
MWC10.0(formerly called Mix Water Conditioner)
For the world’s most beautiful concrete
MWC10.0(formerly called Mix Water Conditioner)
Photo taken in 2010
M-Cast 64 Additive for Concrete
M-Cast 64 is a zero VOC synthetic additive specifically designed for water retention in vibrocompacted “semi-dry” concrete applications – precast & Gunite. This is an extremely thixotropic additive that allows the user to increase the level of water in concrete formulations without sacrificing high viscosity characteristics.
With M-Cast 64
Without M-Cast 64
Are there any other problem areas we haven’t addressed?
We want to work with you to find the solutions that you need. Detailed product information is also available at:
www.concretesbestsolution.com
All Green Chemical Solutions, Llc.
Paducah, KY
270.415.5289
Thank you, remember us for your next projects.