ProRadiant Manifolds, Stations & Fittings - 2010...
Transcript of ProRadiant Manifolds, Stations & Fittings - 2010...
197
ProRadiant
Pro
Ra
dia
nt
ProRadiantManifolds, Stations and Fittings
198
StockCode
Dimension Qty Approx.wt./lb. Each
List PriceEach ($)
Stainless Manifolds and
Accessories
# of Outlets
STAINLESS MANIFOLD - SHUT-OFF / BALANCING / FLOW METERSThese preassembled 1-1/4" diameter stainless supply and return manifolds come attached to two 6-5/8" spacing brackets for compact remote mounting. This stainless manifold provides shut off and balancing valves with flow meters for each set of circuits. Manifold is used with flow rates up to 2 GPM per circuit with a maximum of 18 GPM. The air bleeders and purge valves are connected and factory tested. 1-1/4" Union connection, 1" NPT removable end caps. Circuit connection fittings are sold separately.
6model 2804
1590015901159021590315904159051590615907159081590915910
2 13 14 15 16 17 18 19 110 111 112 1
5.2895.8886.9137.9289.9279.942
11.00211.97713.02614.02115.001
XXXXXXXXXXXXXXXXXXXXXX
# of Outlets
STAINLESS MANIFOLD - SHUT-OFF / BALANCINGThese preassembled 1-1/4" diameter stainless supply and return manifolds come attached to two 6-5/8" spacing brackets for compact remote mounting. This stainless manifold provides shut off and balancing valves for each circuit. Manifold is used with flow rates up to 2 GPM per circuit with a maximum of 18 GPM. The air bleeders and purge valves are connected and factory tested. 1-1/4" Union connection, 1" NPT removable end caps. Circuit connection fittings are sold separately.
6model 2879
1570015701157021570315704157051570615707157081570915710
2 13 14 15 16 17 18 19 110 111 112 1
4.4745.7636.8597.1588.0638.9729.912
10.83213.16
12.64613.526
XXXXXXXXXXXXXXXXXXXXXX
# of Outlets
STAINLESS MANIFOLD - VALVELESSThese preassembled 1-1/4" diameter stainless supply and return manifolds come attached to two 6-5/8" spacing brackets for compact remote mounting. Manifold is used with flow rates up to 2 GPM per circuit with a maximum of 18 GPM. The air bleeders and purge valves are connected and factory tested. 1-1/4" Union connection, 1" NPT removable end caps. Circuit connection fittings are sold separately.
6model 2878
1650016501165021650316504165051650616507165081650916510
2 13 14 15 16 17 18 19 110 111 112 1
2.3393.2243.7244.2094.7195.2495.7386.2486.7537.2437.718
XXXXXXXXXXXXXXXXXXXXXX
Union x F NPT
STAINLESS MANIFOLD BALL VALVE SETUse stainless manifold ball valve set to isolate stainless manifold from existing piping.
6model 2877.2
15056 1 1/4 x 1 1 1.713XX
199
ProRadiant
StockCode
Dimension Qty Approx.wt./lb. Each
List PriceEach ($)
Pro
Ra
dia
nt
STAINLESS MANIFOLD EXPANSION SET - SHUT-OFF / BALANCINGThese stainless manifold extensions attach to stainless manifolds to add circuits. Expansion set comes with balancing valve on supply and shut off valve on return manifold. 1-1/4" M NPT x 1" M NPT adapter included in set.
6model 2877.4
15058 1 2.324XX
STAINLESS MANIFOLD EXPANSION SET - SHUT-OFF / BALANCING / FLOW METERThese stainless manifold extensions attach to stainless manifolds to add circuits. Expansion set comes with balancing valve/flow meter on supply and shut off valve on return manifold. 1-1/4" M NPT x 1" M NPT adapter included in set.
6model 2877.5
15059 1 2.439XX
EXPANSION NIPPLEAdapters to connect stainless manifolds.
6model 2878.922
15186 1 1/4 x 1 2 0.315XX
STAINLESS MANIFOLD OUTLET CAPSUse these caps to seal extra outlets on Stainless Steel Manifolds.
6model 2856.7
15054 SVC 2 0.033XX
M NPTx F NPT
REDUCERS1-1/4" to 1" NPT reducers are used to connect Stainless Manifolds to Mixing Stations and Injection Stations.
6model 1003.5SV
15044 1 1/4 x 1 2 0.364XX
200
StockCode
Dimension Qty Approx.wt./lb. Each
List PriceEach ($)
in
STAINLESS MANIFOLD END PLUGSThese plugs are used to seal the ends of the Stainless Steel Manifolds.
6model 2856.6
15053 1 2 0.136XX
in
AUTOMATIC AIR VENTAutomatic air vent can be used as an alternative for air bleeder on stainless manifolds. Air vent should be mounted on the supply header.
6model 2877.1
15040 1/2 1 0.408XX
CIRCUIT TEMPERATURE GAUGE SETThis mini temperature gauge snaps on return side of Stainless Manifold Shut-Off / Balancing / Flow Meter. Gauge reads return temperature of individual circuits.
6model 2877.6
15060 1 0.115XX
SYSTEM PRESSURIZATION KITPressurization kit for Viega stations or manifolds. Connects to purge valve or SVC fitting. Two 1-1/4" M NPT x 1" F NPT reducers and two 1" NPT plugs included for testing remote manifolds. Gauge reads 0 - 100 psi.
6model 2873.5US
21210 1 1.30XX
SVC CIRCUIT BALL VALVEAttach to valve seats on manifolds to provide individual circuit shut-off capability. Useful for purging one circuit at a time, or for circuit shut-off on 1-1/2" brass manifolds and stainless manifold valveless.
6model 1024SV
15031 1 0.30XX
201
ProRadiant
StockCode
Dimension Qty Approx.wt./lb. Each
List PriceEach ($)
Pro
Ra
dia
nt
PEX Press x SVC
SVC PRESS ADAPTERThese adapters allow the Viega PEX Press connection system to be used on manifolds or other SVC connection components.
6model 2819NG
8940789408894098941389410
5/16 53/8 51/2 55/8 53/4 5
0.1410.1370.1450.1610.156
XXXXXXXXXX
in
SVC COMPRESSION PEX ADAPTERThese compression fittings attach ViegaPEX tubing to Viega manifolds, SVC x M NPT and SVC couplings.
6model 1022SV
1900719008190091901019011
5/16 23/8 21/2 25/8 23/4 2
0.2160.2040.20
0.1960.375
XXXXXXXXXX
in
SVC COMPRESSION COPPER ADAPTERCompression fittings connect copper tubing to SVC seat without soldering. Compression fittings are compatible with type K, L and M copper tubing only.
6model 9438.5SV
1930519306
1/2 103/4 10
0.0860.32
XXXX
in
SVC MALE NPT ADAPTERThese fittings adapt any SVC adapters to a male NPT fitting.
6model 1022.6SV
1910919110
1/2 53/4 5
0.140.165
XXXX
SVC COUPLINGAccepts all SVC system adapters to couple tubing of the same or different sizes.
6model 1022.7SV
19012 10 0.154XX
202
StockCode
Dimension Qty Approx.wt./lb. Each
List PriceEach ($)
in
COMPRESSION COUPLING 5/16"Low profile compression coupling for 5/16" tubing, specifically for Climate Panel tubing repairs.
6model 1030SV
19013 5/16 10 0.15XX
in
SVC COMPRESSION COUPLINGSVC Compression Couplings allow easy repair of damaged tubing or connection of splices. Each includes SVC coupling and two PEX adapters.
6model 1030.1SV
19014190151901619017
3/8 11/2 15/8 13/4 1
0.560.5580.5270.898
XXXXXXXX
STRAP ON TEMPERATURE GAUGE SETEasy to read 2-1/2" diameter temperature gauge straps onto copper piping with included spring, or can be soldered. Gauge reads 32-250 °F.Heat transfer paste included.
6model 2810.3US
15055 1 0.30XX
203
ProRadiant
StockCode
Dimension Qty Approx.wt./lb. Each
List PriceEach ($)
Pro
Ra
dia
nt
Header xCircuit Connection- Outlets
COPPER MANIFOLD, SHUT-OFF VALVESCommonly used in commercial heating, cooling and snow-ice melting applications. These Shut-Off Valve Copper Manifolds are available in 1-1/2" and 2" configurations. Copper Manifolds with Shut-Off Valves are Viega PEX Press connection type only. Made of Type L copper. 1-1/2" and 2" Copper Manifolds are designed to utilize Viega’s ProPress fittings to connect to boiler loop. Recommended max. flow rate of 1-1/2" Copper Manifolds is 32 gpm. Recommended max. flow rate of 2" Copper Manifolds is 45 gpm.
6model 2834US
17121171221710217103
1 1/2 x 5/8 - 12 11 1/2 x 3/4 - 12 12 x 5/8 - 12 12 x 3/4 - 12 1
9.4679.347
11.34711.227
XXXXXXXX
Header xCircuit Connection- Outlets
COPPER MANIFOLD, SHUT-OFF / BALANCING VALVESCommonly used in commercial heating, cooling and snow-ice melting applications. These Shut-Off / Balancing Valve Copper Manifolds are available in 1-1/2" and 2" configurations. Copper Manifolds with Shut-Off / Balancing Valves are Viega PEX Press connection type only. Made of Type L copper. 1-1/2" and 2" Copper Manifolds are designed to utilize Viega’s ProPress fittings to connect to boiler loop. Recommended max. flow rate of 1-1/2" Copper Manifolds is 32 gpm. Recommended max. flow rate of 2" Copper Manifolds is 45 gpm.
6model 2834.4US
17123171241710417105
1 1/2 x 5/8 - 12 11 1/2 x 3/4 - 12 12 x 5/8 - 12 12 x 3/4 - 12 1
13.30613.18615.18615.066
XXXXXXXX
Header xCircuit Connection- Outlets
COPPER MANIFOLD, VALVELESSCommonly used in commercial heating, cooling and snow-ice melting applications. These Valveless Copper Manifolds are available in 1", 1-1/2" and 2" configurations. Made of Type L copper. 1-1/2" and 2" Copper Manifolds are designed to utilize Viega’s ProPress fittings to connect to boiler loop. 1" Copper Manifolds are either copper male or copper female for solder connections to boiler loop. Recommended max. flow rate for 1" Copper Manifolds is 13 gpm. Recommended max. flow rate of 1-1/2" Copper Manifolds is 32 gpm. Recommended max. flow rate of 2" Copper Manifolds is 45 gpm.
6model 2835US
171401714117142171431712017100
1 x 1/2 - 2 21 x 1/2 - 3 21 x 1/2 - 4 21 x 1/2 - 12 21 1/2 x 3/4 - 18 22 x 3/4 - 18 2
0.370.500.621.64
6.3889.067
XXXXXXXXXXXX
204
StockCode
Dimension Qty Approx.wt./lb. Each
List PriceEach ($)
PEX Press
PEX PRESS SLEEVESThese stainless steel sleeves provide a secure press fit for the Viega PEX Press system. The view hole can be used to verify full tubing insertion. Use only with Viega PEX Press fittings and tools.
6model 2811.5
61000610206103061040610606107061080
3/8 1001/2 1005/8 1003/4 1001 1001 1/4 501 1/2 50
0.0060.0070.0080.01
0.0160.0410.048
XXXXXXXXXXXXXX
Copper x PEX Press
SHUT-OFF VALVEThese Shut-Off Valves are available in Copper (female) x Viega PEX Press. These Shut-Off Valves can be used to connect radiant heating and / or cooling PEX tubing to Viega Valveless Copper Manifolds, or other copper x PEX Press connections.
6model 2834.1US
171601716117162
1/2 x 1/2 103/4 x 5/8 103/4 x 3/4 10
0.260.430.42
XXXXXX
Copper x PEX Press
SHUT-OFF / BALANCING VALVEThese Shut-Off / Balancing Valves are available in Copper (female) x Viega PEX Press only. These Shut-Off / Balancing Valves can be used to connect radiant heating and / or cooling PEX tubing to Viega Valveless Copper Manifolds, or other copper x PEX Press connections.
6model 2834.2US
171631716417165
1/2 x 1/2 103/4 x 5/8 103/4 x 3/4 10
0.520.750.74
XXXXXX
Copper x PEX Compression
SHUT-OFF VALVEThese Shut-Off Valves are available in Copper (female) x Compression. These Shut-Off Valves can be used to connect radiant heating and / or cooling PEX tubing to Viega Valveless Copper Manifolds, or other copper x PEX Compression connections.
6model 2834.3US
1716617167
1/2 x 1/2 103/4 x 5/8 10
0.390.65
XXXX
in
COPPER MANIFOLD END CAPSCopper Manifold End Caps have two F NPT adapters, one is 1/2" for a draw-off (purge valve). The other is 1/8" for an automatic air vent (bottle vent). Made of Type L copper.
6model 2834.5US
171441712517106
1 11 1/2 12 1
0.400.610.89
XXXXXX
205
ProRadiant
StockCode
Dimension Qty Approx.wt./lb. Each
List PriceEach ($)
Pro
Ra
dia
nt
in
COPPER MANIFOLD BRACKETSThe Copper Manifold Brackets simplify installation and are designed to give the proper offset between the supply and return header.
6model 2878.927
171451712617107
1 21 1/2 12 1
XXXXXX
206
StockCode
Dimension Qty Approx.wt./lb. Each
List PriceEach ($)
ProBlocThe Viega ProBloc provides a mixed system supply water temperature that is modulated by a built in mixing valve and actuator. With an easy flip of a dip switch to "ProBloc" on the front display of the Basic Heating Control, all control settings e.g. actuator speed will default to ProBloc. ProBlocs are available with two 3-speed circulator pump options, either high or low head. Boiler loop connections can be made with a variety of fittings: ProPress, PEX Press or F NPT adapters. To connect to a nearby stainless manifold use the new Stainless Manifold Connections Set. Additional Features:· Built in pressure differential valve· Circulator Pump with built-in check valve· Simple bracket installation to mount ProBloc· Shut-Off valves with built-in temperature
gauges on supply and return· Installation template including wiring to Basic
Heating Control· Modern insulated enclosure design
6model 2881
1260012605
Low Head 3-Speed Circulator 1High Head 3-Speed Circulator 1
XXXX
BA x SMA
Stainless Manifold Connection SetUse this Stainless Manifold Connection Set to hook up a stainless manifold directly to the ProBloc.BA = ProBloc outlet connectionSMA = Stainless Manifold
6model 2881.6
12860 1 1/2 x 1 1/4 1 4.959XX
BA x P
ProBloc Adapter ProPressThese adapters are designed to connect to any inlet or outlet of the ProBloc.
6model 2981.2
12800 1 1/2 x 1 2 0.423XX
BA x PEX Press
ProBloc AdapterThese adapters are disigned to connect to any inlet or outlet of the ProBloc.model 2881.2NG
8282582820
1 1/2 x 1 21 1/2 x 1 1/4 2
0.4450.531
XXXX
207
ProRadiant
StockCode
Dimension Qty Approx.wt./lb. Each
List PriceEach ($)
Pro
Ra
dia
nt
BA x F NPT
ProBloc AdapterThese adapters are disigned to connect to any inlet or outlet of the ProBloc.
6model 2881.3
12845 1 1/2 x 1 2 0.574XX
P x P x P
ProBloc Primary Loop Double TeeThe spacing of this Primary Loop Double Tee matches the inlet and outlet connections of the ProBloc.model 2881.4
1285212850
1 x 1 x 1 11 1/4 x 1 1/4 x 1 1
1.031.31
XXXX
208
Circulator Low Head 3-Speed High Head 3-Speed
Stock Stock Outlets Code Code
Mixing Station 2 outlets 15940 15980
Mixing Station 3 outlets 15941 15981
Mixing Station 4 outlets 15942 15982
Mixing Station 5 outlets 15943 15983
Mixing Station 6 outlets 15944 15984
Mixing Station 7 outlets 15945 15985
Mixing Station 8 outlets 15946 15986
Mixing Station 9 outlets 15947 15987
Mixing Station 10 outlets 15948 15988
Mixing Station 11 outlets 15949 15989
Mixing Station 12 outlets 15950 15990
ASSEMBLED MIXING STATIONS WITH STAINLESS MANIFOLD SHUT-OFF / BALANCING / FLOW METERS
The Viega Assembled Mixing Station is shipped ready to hang on the wall. The Stainless Manifold Shut-Off / Balancing / Flow meters is available with compression (COM), press (PRS) or copper compressiom (COP) adapters. Boiler or primary loop connections can be made with ProPress (PPS), PEX Press (PRS) or copper (male) (COP). Station comes preassembled and factory tested. Boiler feed, tubing direction, tubing size and circuit connection must be speciUed - see ordering example below.
CONFIGURATIONS
BL (Bottom Left ConUguration)
TL (Top Left ConUguration)
TR (Top Right ConUguration)
BR (Bottom Right ConUguration)
When ordering, specify:
STOCK — CONFIGURATIONS — TUBING — CIRCUIT — BOILER CODE SIZE CONNECTION ADAPTER
Example:
15940-BR-1/2-PRS-PPS
Stock code Bottom tubing,
Right boiler feed
(Configuration)
1/2" tubing Press Circuit
Connection
Boiler
Adapter
ProRadiant
Assembled Mixing Station order conUguration speciUcation examples
209
ProRadiant
StockCode
Dimension Qty Approx.wt./lb. Each
List PriceEach ($)
Pro
Ra
dia
nt
BASE MIXING STATIONSThe new Viega Mixing Station provides supply water temperature modulation when connected to a variety of heat sources such as conventional or condensing boilers, water heaters, or geothermal heat pumps. Stations are now available with 3 speed circulator pumps either in high or low head. Boiler connections can be made with ProPress, PEX Press Adapters or Copper (male) for soldering. Red and blue caps on the ProPress Ball Valves clearly indicate system supply and return connections. A built in sensor well allows easy mounting of the supply temperature sensor for either the Basic Heating Control or Advanced Heating Control.
HIGH HEADmodel 2801.0US
121211212212124
ProPress 1PEX Press 1Copper (male) 1
27.14224.27324.482
XXXXXX
LOW HEAD
6model 2801.8US
121201212312125
ProPress 1PEX Press 1Copper (male) 1
23.99327.42227.632
XXXXXX
outlets
ASSEMBLED MIXING STATIONS WITH STAINLESS MANIFOLD - SHUT OFF / BALANCING / FLOW METERSThe Viega Assembled Mixing Station is shipped ready to hang on the wall. The stainless manifold - shut off / balancing / flow meters is available with compression (com), press (prs) or copper (cop) adapters. Station comes preassembled and factory tested. Boiler feed, tubing direction, tubing size and circuit connection must be specified.
NOTE: Made to Order. Lead time apx. 10 working days.
LOW HEAD PUMPmodel 2804.2US
1594015941159421594315944159451594615947159481594915950
2 13 14 15 16 17 18 19 110 111 112 1
XXXXXXXXXXXXXXXXXXXXXX
HIGH HEAD PUMP
6model 2804.4US
1598015981159821598315984159851598615987159881598915990
2 13 14 15 16 17 18 19 110 111 112 1
210
StockCode
Dimension Qty Approx.wt./lb. Each
List PriceEach ($)
outlets
ASSEMBLED MIXING STATION WITH STAINLESS MANIFOLD - SHUT OFF / BALANCINGThe Viega Assembled Mixing Station is shipped ready to hang on the wall. Station comes preassembled and factory tested. Stock code, tubing direction, boiler location, tubing size, circuit connection and boiler connection type must be specified - see ordering example below.NOTE: Made to Order. Lead time apx. 10 working days.
LOW HEAD PUMPmodel 2879.2US
1574015741157421574315744157451574615747157481574915750
2 13 14 15 16 17 18 19 110 111 112 1
XXXXXXXXXXXXXXXXXXXXXX
HIGH HEAD PUMP
6model 2879.4US
1578015781157821578315784157851578615787157881578915790
2 13 14 15 16 17 18 19 110 111 112 1
XXXXXXXXXXXXXXXXXXXXXX
211
ProRadiant
StockCode
Dimension Qty Approx.wt./lb. Each
List PriceEach ($)
Pro
Ra
dia
nt
PEX Press Fittings
PEX Press x C
BRONZE PEX PRESS PROPRESS ADAPTERSUse these adapters to transition directly from ViegaPEX or FostaPEX to copper tubing. Press fittings make flameless plumbing and hydronic heating connections fast and simple. The ProPress tool, available through Ridge Tool distribution, is required for the copper connection. ProPress is compatible with type K, L and M copper tubing only.
6model 2813PNG
696206962669627696286963069640696606967069680
1/2 x 1/2 51/2 x 3/4 55/8 x 1/2 55/8 x 3/4 53/4 x 1/2 53/4 x 3/4 51 x 1 51 1/4 x 1 1/4 51 1/2 x 1 1/2 5
0.0790.130.08
0.1340.0810.1260.2020.3030.515
XXXXXXXXXXXXXXXXXX
PEX Press x Copper (female)
BRONZE PEX PRESS COPPER TUBING ADAPTERSUse copper tubing adapters to make a PEX Press connection between ViegaPEX or FostaPEX tubing and standard copper tubing. Adapters solder over copper tubing.
6model 2813.5NG
8200682021820268202782031820368204182045820608207082080
3/8 x 1/2 51/2 x 1/2 51/2 x 3/4 55/8 x 1/2 55/8 x 3/4 53/4 x 1/2 53/4 x 3/4 53/4 x 1 51 x 1 51 1/4 x 1 1/4 51 1/2 x 1 1/2 5
0.0640.0680.1040.0720.1170.0710.12
0.1790.1960.3530.488
XXXXXXXXXXXXXXXXXXXXXX
PEX x Copper (male)
BRONZE PEX PRESS COPPER FITTING ADAPTERSUse copper fitting adapters to make PEX Press connections between ViegaPEX or FostaPEX tubing and copper fittings. Adapters fit into solder cup or ProPress fittings.
6model 2813.1NG
87520875258753087531875358754087545875608757087580
1/2 x 1/2 51/2 x 3/4 55/8 x 1/2 55/8 x 3/4 53/4 x 1/2 53/4 x 3/4 53/4 x 1 51 x 1 51 1/4 x 1 1/4 51 1/2 x 1 1/2 5
0.0750.1190.0770.1190.0820.1210.1650.1790.3640.515
XXXXXXXXXXXXXXXXXXXX
PEX x Copper
BRONZE PEX PRESS COPPER TUBING ELBOWS90° elbows connect ViegaPEX or FostaPEX tubing to copper tubing. Bronze PEX Press fittings make baseboard and plumbing connections fast and simple. Sweat elbow fits over standard copper tubing or baseboard.
BRONZE PEX PRESS FEMALE COPPER TUBING ELBOWSmodel 2814.5NG
893088931289309
1/2 x 3/4 55/8 x 3/4 53/4 x 3/4 5
0.3460.3440.337
XXXXXX
Bronze Pex Press Male Copper Fitting Elbowsmodel 2814.6NG
89310 1/2 x 1/2 5 0.187XX
Bronze Pex Press Male or Female Copper Fitting or Tubing Elbows
6model 2814.7NG
893078931389311
1/2 x 3/4 or 1/2 55/8 x 3/4 or 1/2 53/4 x 3/4 or 1/2 5
0.3350.3330.326
XXXXXX
212
StockCode
Dimension Qty Approx.wt./lb. Each
List PriceEach ($)
PEX Press x PEX Press
BRONZE PEX PRESS ELBOWSUse elbows for making 90° PEX Press connections in ViegaPEX or FostaPEX runs.
6model 2816NG
835208353083540835608357083580
1/2 55/8 53/4 51 51 1/4 51 1/2 5
0.0930.1610.1610.2380.5910.851
XXXXXXXXXXXX
PEX Pressx PEX Pressx PEX Press
BRONZE PEX PRESS TEESUse these PEX Press tees to join ViegaPEX or FostaPEX tubing. Dimensions are listed as labeled, A x B x C.
6model 2818NG
840208402184022840308404084032840348403684060840378403984038840528405384050840568407084071840738407284074840808408184082840838408484085
1/2 51/2 x 3/8 x 3/8 51/2 x 1/2 x 3/4 55/8 53/4 53/4 x 1/2 x 1/2 53/4 x 1/2 x 3/4 53/4 x 3/4 x 1/2 51 51 x 1/2 x 1/2 51 x 1/2 x 1 51 x 3/4 x 1/2 51 x 3/4 x 3/4 51 x 3/4 x 1 51 x 1 x 1/2 51 x 1 x 3/4 51 1/4 51 1/4 x 1 x 3/4 51 1/4 x 1 x 1 51 1/4 x 1 1/4 x 3/4 51 1/4 x 1 1/4 x 1 51 1/2 51 1/2 x 1 x 3/4 51 1/2 x 1 x 1 51 1/2 x 1 1/2 x 3/4 51 1/2 x 1 1/2 x 1 51 1/2 x 1 1/2 x 1 1/4 5
0.1130.1060.1980.190.19
0.1790.1790.1870.3390.2890.3520.2930.2450.35
0.2540.2910.7030.5290.5930.5490.6020.86
0.6170.7380.6740.7670.884
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
PEX Press
BRONZE PEX PRESS TEST PLUGSUse PEX Press plugs to cap ViegaPEX or FostaPEX tubing with a PEX Press connection for pressure testing or at dead ends.
6model 2856NG
8500085121851318514185161
3/8 51/2 55/8 53/4 51 5
0.0270.0360.0480.0590.11
XXXXXXXXXX
213
ProRadiant
StockCode
Dimension Qty Approx.wt./lb. Each
List PriceEach ($)
Pro
Ra
dia
nt
PEX Press x M NPT
BRONZE PEX PRESS MALE NPT ADAPTERSUse male adapters to make a PEX Press connection between ViegaPEX or FostaPEX tubing and a female NPT thread.
6model 2811NG
8050680521805268052780531805428054180546805628055680561805668057180581
3/8 x 1/2 51/2 x 1/2 51/2 x 3/4 55/8 x 1/2 55/8 x 3/4 53/4 x 1/2 53/4 x 3/4 53/4 x 1 53/4 x 1 1/4 21 x 3/4 51 x 1 51 x 1 1/4 21 1/4 x 1 1/4 21 1/2 x 1 1/2 2
0.130.1310.1760.1190.1840.11
0.1850.3240.5360.2090.3440.5550.5950.716
XXXXXXXXXXXXXXXXXXXXXXXXXXXX
PEX Press x M NPT
BRONZE PEX PRESS MALE NPT ELBOWSUse male NPT threaded elbows to make a 90º PEX Press connection between ViegaPEX or FostaPEX tubing and a female NPT thread.
6model 2814NG
8252082525825408254582565825608257082575
1/2 x 1/2 51/2 x 3/4 53/4 x 3/4 53/4 x 1 53/4 x 1 1/4 21 x 1 51 x 1 1/4 21 1/4 x 1 1/4 2
0.220.3390.3310.8181.2540.8111.2521.299
XXXXXXXXXXXXXXXX
PEX Press x F NPT
BRONZE PEX PRESS FEMALE NPT ADAPTERSUse female adapters to make a PEX Press connection between ViegaPEX or FostaPEX tubing and a male NPT thread.
6model 2812NG
815208152581541815408154581560
1/2 x 1/2 51/2 x 3/4 53/4 x 1/2 53/4 x 3/4 51 x 3/4 51 x 1 5
0.1260.1420.1280.1480.1720.253
XXXXXXXXXXXX
PEX Press x PEX Press
BRONZE PEX PRESS COUPLINGSUse these couplings to connect two sections of ViegaPEX or FostaPEX tubing with the PEX Press connection. Use to repair damaged sections or connect long runs.
6model 2815NG
830018300083020830508303083040830558307183060830658307383070830758308083072
5/16 53/8 51/2 51/2 x 3/4 55/8 53/4 53/4 x 1 53/4 x 1 1/4 51 51 x 1 1/4 51 x 1 1/2 51 1/4 51 1/4 x 1 1/2 51 1/2 51 1/2 x 3/4 5
0.0320.0420.0550.0720.0670.0770.1190.1970.1370.2160.2640.2810.3310.3450.246
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX