Propane Powered 21” Industrial Walk Mower€¦ · Zipper Mowers has partnered with EnviroGard to...
Transcript of Propane Powered 21” Industrial Walk Mower€¦ · Zipper Mowers has partnered with EnviroGard to...
137 Cross Center Road # 246 | Denver, NC 28037Telephone: 316-775-7766 | Fax: 704-820-2892
www.zippermowers.com
Available through:
Propane Powered 21” Industrial Walk MowerZipper Mowers has partnered with EnviroGard to introduce the first ever 21” Environmentally Friendly Propane Powered Industrial Walk Mower. These mowers are industrial grade, featuring cast aluminum decks with superior cutting and bagging capabilities. They are powered by clean burning, American made propane gas. Propane reduces emissions, fuel costs, and maintenance while providing long run time with less down time boosting overall productivity.
WHEELS: Cast aluminum, dual steel ball bearings with stabilizer bushings, replacable rubber tire. 9” x 2 1/4” (front and rear)
HANDLE: 1” diameter one piece steel, 3 position height adjustmentCUTHEIGHT: 3/4 - 4 inchesCUTWIDTH: 21 inchesGRASSCATCHER:Easy lift, nylon mesh, dust liner, 2.5 bushel
capacity (3.1 cu feet) standardMULCH: Mulch plug standardWEIGHT: 125 Zone; 130 BBCWARRANTY: 1 year mower (2 years engine)OPTIONS: Shaft guard (zone start only)
ENGINE: EnviroGard / Kawasaki FJ180V K.A.I. 6HP EPA & CARB Certified Gasoline Powered Option AvailableFUELCYLINDER: LPG (Propane) 10LB (2.4 US gallons)
Motor Fuel Rated Composite Fuel Cylinder RUNTIME: Approximately 10 hours per CylinderDRIVE: Self-propelled models, 3 speed
transmission “shift on the fly” • 1st Gear 2.4 MPH• 2nd Gear 3.3 MPH • 3rd Gear 4.1 MPH
DECK: Cast aluminum, hi vacuum, rear discharge, edge guard.
ZoneStartRetail $1,793 | Sale $1,629
BBCModelRetail $1,793 | Sale $1,629
Environmentally Friendly• 90% Reduction in Toxic Emissions• Designated Clean Fuel by the EPA
Reliable Productivity• Zero Fuel Contamination & Spillage, Reduced Theft Potential• Closed Fuel System Produces Consistent, Reliable Fuel Delivery• Propane Does Not Contain Ethanol• Long 10+ Hour Run Time Per Cylinder
Reduced Costs • Propane Costs Less Than Gasoline • Propane Does Not Go Bad • Longer Engine Life With Reduced Maintenance • Federal & State Tax Incentives
Meet the Family: Propane and Gasol ine Options Avai lable
Available through:137 Cross Center Road # 246 | Denver, NC 28037Telephone: 316-775-7766 | Fax: 704-820-2892
www.zippermowers.com
Propane Powered 21” Industrial Walk Mower
64”&74”IndustrialFrontCut
List $13,148Sale Price From
$11,953
44”&54”ProfessionalFrontCutList $9,861
Sale Price From $8,890
50”&60”IndustrialMidCut
List $10,124Sale Price From
$9,204
DIECASTALUMINUMDECKHiVac commercial-duty alum deck with a deep draw and large discharge chute designed to maximize air flow and suction. This design ensures full loading and compaction of clippings into the bag even in very wet and soggy conditions.
CRANKSHAFT1 inch crankshaft (zone start models) with Optional steel crankshaft protector 7/8” crankshaft (BBC model)
ALUMINUMWHEELS2” X 9” alum wheels featuring large diameter sealed bearings and steel stabilizer bushings to handle heavy side loads.
TIRESReplaceable high durameter rubber tires for long lasting performance. The tires eliminate “ovalizing” of the wheel commonly found on semi-pneumatic wheel/tire combinations. No need to replace the wheel because of a worn tire.
HANDLES1” diameter heavy duty one-piece handle. The handle height is easily adjustable for operator’s comfort and convenience.
TRANSMISSION3-speed shift on the fly rear wheel drive. The transmission features steel cut gears, internally sprung clutch requiring no adjustment and full ball bearing construction.
AXLEHUBMachined front and rear axle hubs. Rear hubs are fitted with grease-able bearings, zerk fittings and dust seals for long life and superior performance expected in a commercial mower.
PROPANECYLINDER10LB (2.4 Gallon) horizontal vapor withdraw composite cylinders are specifically designed for mowing and provide over 10 hours cutting time while allowing operators to see the fuel level. Cylinders exceed all DOT safety requirements & ASME motor fuel specifications. They feature left hand service valves and quick fill valves with overfill protection.
Eastman Commercial
Eastman Industries 70 Ingersoll Drive, Portland, ME 04103 • 800-760-1680 • Fax 207-878-9109www.eastmanmowers.com [email protected]
SPX 21 Kawasaki 6 HP
DIE CAST ALUMINUM DECKHiVac commercial-duty alum deck with a deep draw and large discharge chute designed to maximize air flow and suction. This design ensures full loading and compaction of clippings into the bag even in very wet and soggy conditions.
CRANKSHAFT1 inch crankshaft (zone start models) with Optional steel crankshaft protector7/8" crankshaft (BBC model)
ALUMINUM WHEELS2" X 9" alum wheels featuring large diameter sealed bearings and steel stabilizer bushings to handle heavy side loads.
TIRESReplaceable high durameter rubber tires for long lasting performance. The tires eliminate “ovalizing” of the wheel commonly found on semi-pneumatic wheel/tire combinations. No need to replace the wheel because of a worn tire.
HANDLES1" diameter heavy duty one-piece handle. The handle height is easily adjustable for operator's comfort and convenience.
TRANSMISSION3-speed shift on the fly rear wheel drive. The transmission features steel cut gears, internally sprung clutch requiring no adjustment and full ball bearing construction.
AXLE HUBMachined front and rear axle hubs. Rear hubs are fitted with grease-able bearings, zerk fittings and dust seals for long life and superior performance expected in a commercial mower.
PARTS & SERVICEThe mower design incorporates interchangeable components. For example: Height adjuster levers, locators and wheels are interchangeable. A removable rear deck panel provides easy access for servicing the cables and drive train.
Optional mulch plug