Promotional range - Ritrama · PROMOTIONAL SERIES PROMOTIONAL SERIES PROMOTIONAL ADHESIVES PRODUCT...
6
www.ritrama.com FILMS PAPERS & BOARDS TECHNICAL DATA PROMOTIONAL RANGE
Transcript of Promotional range - Ritrama · PROMOTIONAL SERIES PROMOTIONAL SERIES PROMOTIONAL ADHESIVES PRODUCT...
w w w . r i t r a m a . c o m
GENERAL INFORMATION
Product Range
The product range represents the most typical applications. Many other constructions, according to specific customer requests, can be developed by our Technical Department.
All Ritrama products are subject to strict manufacturing controls to guarantee good quality products. All statements and technical information published in this document are based upon tests believed to be reliable, even if this does not constitute a warranty.
Considering all the possible uses of Ritrama products, the purchaser should make sure that the products fit for the purpose they are intended to be used.
Quality & Approvals
Ritrama products are manufactured to high quality standards and certified to ISO 9001:2008. All sheet products, with exception of those made using our standard red vinyl, comply with the requirements of:_ Packaging and Packaging waste directive 94/62/EC Art.11 (EEC). _ EN-71/3:2013 European Community Toy Safety Standard, restricting soluble metal content (EEC). _ EU Directive 2002/95/EC RoHS:_ EU Directive 1907/2006/EC Reach:
For specific information regarding certifications, please contact our Customer Information Service department or visit our website www.ritrama.com.
Sheets Size
Standard size for films and boards 70 X 100 cmStandard size for papers 70 X 100 cm or 50 X 70 cmOther sizes available under request only for papers (any other specific size can be provided according to quantity). 45 X 64 cm or 43 X 61 cm
RI-Line
Papers available with RI-Line: spacing 3,8 cm.PVC available with RI-Line: spacing 5 cm.
Recommended Storage Conditions
Please check all packaging on receipt of goods and inform the supplier immediately in case of shortage or damage. The material must be stored at a temperature of 22°C +/- 2°C and 50% of Relative Humidity. Do not store close to a heat source and do not expose to direct sun light.The storage area must be dry and clean. Turn the stock over using the oldest material. Please keep the material in the original packaging until required for use, in order to protect it from dust and contaminations. Boxes which are opened for partial use must be carefully closed again.
For further information please contact your Ritrama Sales representative or visit our website www.ritrama.com.Films papers & boards
T e c h n i c a l d a T a
Promotional range
www.ritrama.com
RITRAMA S.p.A. Viscom Slitting & Distribution CentreVia Senatore Simonetta, 2420867 Caponago (MB) - ITALYPh. +39 02 955 459.1Fax +39 02 955 [email protected]
RITRAMA S.p.A.Headquarters Roll Slitting & Distribution CentreVia Senatore Simonetta, 2420867 Caponago (MB) - ITALY Ph. +39 02 955 459.1Fax +39 02 955 [email protected]
RITRAMA S.p.A.Production CentrePolo Ind.le Berbentina60041 Sassoferrato (AN) - ITALYPh. +39 0732 97061Fax +39 0732 [email protected]
RITRAMA Inc.Production Centre800 Kasota Avenue SeMinneapolis MN 55414 - U.S.A.Ph. +1 612 378 2277Fax +1 612 378 9327Toll Free (800) 328 [email protected]
RITRAMA Inc.Production Centre341 Eddy RoadCleveland OH 44108 - U.S.A.Ph. +1 216 851.2300Fax +1 216 851.1938Toll Free (888) 362 [email protected]
RITRAMA S.p.A. Production CentreVia Brescia, 47/A20063 Cernusco sul Naviglio (MI) - ITALYPh. +39 02 923948.1Fax +39 02 [email protected]
RITRAMA MÉXICO Slitting & Distribution CentreMimosas #104 Col. Santa María Insurgentes06430 México D.F. - MÉXICO Ph. +52 55 2630 2516Fax +52 55 2630 [email protected]
RITRAMA UKRAINE Slitting & Distribution CentreUl. Novopirogovskaya, 64-A03045 Kiev - UKRAINEPh. +38 044 206 81 41Fax +38 044 206 81 [email protected]
RITRAMA POLAND Slitting & Distribution Centreul. Wrocławska 5356-410 Dobroszyce - POLANDPh. +48 71 314 46 95Fax +48 71 315 95 [email protected]
RITRAMA Inc.Slitting & Distribution Centre345 Eddy RoadCleveland OH 44108 - U.S.A. Toll Free (888) 362 [email protected]
RITRAMA COLOMBIA S.A.S.Slitting & Distribution CentreCalle 98 Sur # 48 -270 Bdg 18, Bodegas San SebastianLa Estrella, AntioquiaMedellín - COLOMBIAPh. +57 4 4445518Fax +57 4 [email protected]
RITRAMA S.A.Production & Distribution CentreAv. Tupungato 3420 - Lotes 39 y 40Parque Industrial CuraumaValparaíso - CHILEPh. +56 32 2996 304Fax +56 32 2996 [email protected]
RITRAMA S.A. Production & Distribution CentreAvda, Castell Barberà 30Polig. Ind. Santiga08210 Barberà del Valles - SPAIN Ph. +34 (0) 93 729 4998Fax +34 (0) 93 729 [email protected]
RITRAMA (UK) Ltd. Production & Distribution CentreTameside Park, Fifth AvenueDukinfield - East Manchester SK16 4PP UNITED KINGDOMPh. +44 (0) 161 786 1700Fax +44 (0) 161 786 [email protected]
RITRAMA (Hefei)Pressure-Sensitive Coated Materials Co. Ltd. Production & Distribution CentreQingluan Road, 33/35HEFEI Economic & Technological Development Zone Hefei 230601 - Anhui - CHINAPh. +86 551 638 79 747Fax +86 551 638 79 [email protected]
RITRAMA COSTA RICA S.A. Slitting & Distribution CentreDe Waterland 300N-200E-100SBodega #3 - La Asunción de BelénHeredia - COSTA RICAPh. +506 22392311Fax +506 [email protected]
RITRAMA AUTOADESIVO INDUSTRIA LTDA. Slitting & Distribution CentreRod.Vice Pref.Hermenegildo Tonolli 1500Bairro Fazgran - Jundiaí - SPCEP 13213-086 BRAZILPh. +55 11 4525 1123Fax +55 11 4525 [email protected]
RITRAMA GUATEMALA, S.A. Slitting & Distribution CentreAv. El Ferrocarril 19-97 - zona 12 Centro Empresarial El Cortijo I - Ofibodega 711Ciudad de Guatemala - GUATEMALAPh/Fax: +502 24745367 +502 [email protected]
Production Centre
Slitting & Distribution Centre
PR
OM
OT
ION
AL
TD
01.
15
PROMOTIONAL SERIES PROMOTIONAL SERIES PROMOTIONAL ADHESIVES
PRODUCT NAME ADHESIVE LINER FACE MATERIALWEIGHT
g/m²THICKNESS µ APPLICATIONS
Soft VinylsRI-140/80 PVC GLOSS WHITE AP900 WKPE144 Gloss white soft vinyl 110 80 Labels, stickers and p.o.p. advertising with medium outdoor durability.
RI-145/80 PVC GLOSS WHITE*AP900 - AR801-
AP902WK135 Gloss white soft vinyl 110 80 Labels, stickers and p.o.p. advertising with medium outdoor durability.
RI-175/200 PVC GLOSS WHITE AP900 WK135 Gloss white soft vinyl 260 200 Labels and stickers requiring high thickness and easy application.
RI-165/80 PVC MATT WHITE* AP900 WK135 Matt white soft vinyl 110 80 Labels, stickers and p.o.p. advertising with medium outdoor durability.
RI-205/80 PVC GLOSS CLEAR**AP900 - AR801-
AP902WK135 Gloss clear soft vinyl 104 80
Promotional labels, big size window stickers and electrowelded pouches.
RI-205/100 PVC GLOSS CLEAR** AP900 - AR801 WK135 Gloss clear soft vinyl 130 100Promotional labels, big size window stickers and electrowelded pouches.
RI-275/200 PVC GLOSS CLEAR AP900 WK135 Gloss clear soft vinyl 260 200 Labels and stickers requiring high thickness and easy application.
RI-265/80 PVC MATT CLEAR AP900 WK135 Matt clear soft vinyl 110 80Labels, stickers and p.o.p. advertising requiring a matt finish with medium outdoor durability.
RI-145/70 PVC GLOSS WARM YELLOW *** AP900 WK135 Gloss warm yellow soft vinyl 97 70 P.o.p. labels, industrial marking and decorations.
RI-145/70 PVC GLOSS COLD YELLOW *** AP900 WK135 Gloss cold yellow soft vinyl 97 70 P.o.p. labels, industrial marking and decorations.
RI-145/70 PVC GLOSS GREEN *** AP900 WK135 Gloss green soft vinyl 97 70 P.o.p. labels, industrial marking and decorations.
RI-405/80 PVC PHTHALATEFREE GLOSS WHITE AP902 WK135 Gloss white phthalatefree soft vinyl 104 80 Labels for children toys and promotional labels.
RI-405/80 PVC PHTHALATEFREE MATT WHITE AP902 WK135 Matt white phthalatefree soft vinyl 104 80 Labels for children toys and promotional labels.
RI-405/80 PVC PHTHALATEFREE GLOSS CLEAR AP902 WK135 Gloss clear phthalatefree soft vinyl 104 80 Labels for children toys and promotional labels.
RI-140/100 PVC GLOSS WHITE FLOOR TALKER AP906 GREY WKPE144 Gloss white soft vinyl 134 100For promotional labels and floor talkers (to use in combination with the overlaminating film RI-121/200).
RI-121/200 PVC EMBOSSED GLOSS CLEAR AP906 WG90 Gloss clear embossed scuff resistant soft vinyl 268 200Floor talker overlaminating film, slip resistant in accordance with “The Assessment of Floor Slip Resistance”- Issue 3 2005 by the UK Slip Resistance Group.
PROMO-RI-VIEW PVC PERFORATED GLOSS WHITE ASP30 WK135Black and white perforated 40% open area soft vinyl
170 145Outdoor and transit advertising, including p.o.p. displays and attractive window glazing. Certified by Kraftfahrt-Bundesamt ABG number D 5440 dated 05.03.2008.
RI-459 PVC PHOTOLUMINESCENT AP905 WKPE144 Photoluminescent soft vinyl 515 380Wall decorative stickers and photoluminescent safety signage. Luminance method DIN 67510-1: After 10 Min/101.5 mcd; After 60 Min 11.9 mcd.
* Also available with RI-LINE. The AP900 black is available under request.** Also available with RI-LINE .*** Also available in red, blue and black colours.
Rigid VinylsRI-100/90 PVC GLOSS WHITE AP900 WKPE144 Gloss white rigid vinyl 125 90 Advertising labels and marking specialties.
RI-150/190 PVC GLOSS WHITE AP900 WKPE144 Gloss white rigid vinyl 265 190Advertising labels and marking specialties, where a high thickness is required.
RI-300/90 PVC MATT WHITE AP900 WKPE144 Matt white rigid vinyl 125 90 Advertising labels and marking specialties.
RI-230/80 PVC GLOSS CLEAR AP900 WKPE144 Gloss clear rigid vinyl 110 80 Temporary p.o.p. advertising, marking labels and windows stickers.
RI-210/80 PVC GLOSS SILVER AP900 WKPE144 Gloss silver metallised rigid vinyl 105 80Advertising specialties, high quality metallic decorations and promotional labels.
RI-220/80 PVC GLOSS GOLD AP900 WKPE144 Gloss gold metallised rigid vinyl 105 80Advertising specialties, high quality metallic decorations and promotional labels.
Static Cling FilmsRI-4519/150 PREMIUM PVC GLOSS WHITE - BRD200 Gloss white static cling vinyl 170 150
Advertising specialties such as retail window signage, promotional displays and decorations.
RI-4519/150 PREMIUM PVC GLOSS CLEAR - BRD200 Gloss clear static cling vinyl 170 150Advertising specialties such as retail window signage, promotional displays and decorations.
PolypropylenesRI-705/60 PP GLOSS CLEAR TC AP900 - AR801 WK135 Gloss clear top coated polypropylene 54 60 Promotional and marking labels and p.o.p. advertising.
RI-705/60 PP GLOSS WHITE TC AP900 - AR801 WK135 Gloss white top coated polypropylene 54 60 Promotional and marking labels and p.o.p. advertising.
PRODUCT NAME ADHESIVE LINER FACE MATERIALWEIGHT
g/m²THICKNESS
µAPPLICATIONS
PolyestersLASER FIT PET 50 GLOSS CLEAR TC AP901 WK100
Gloss clear top coated thermostabilized polyester
70 50Office informative labels (like archives or files) and labelling in the logistic field (like identification or signalization labelling).
LASER FIT PET 50 GLOSS WHITE TC AP901 WK100Gloss white top coated thermostabilized polyester
70 50Office informative labels (like archives or files) and labelling in the logistic field (like identification or signalization labelling).
RI-600/23 PET GLOSS CLEAR TC AP900 WKPE144 Gloss clear top coated polyester 32 23Outdoor and indoor promotional and decorative labels where a low thickness is required.
RI-600/36 PET GLOSS CLEAR TC AP900 WKPE144 Gloss clear top coated polyester 50 36Labels for over flating applications in the cycles and motorcycles industry, where high aesthetic and durability is required.
RI-670/23 PET GLOSS SILVER TC AP900 WKPE144 Gloss silver metallised top coated polyester 33 23 High quality labels for appliances and nameplates.
RI-670/36 PET GLOSS SILVER TC AP900 WKPE144 Gloss silver metallised top coated polyester 50 36 High quality labels for appliances and nameplates.
RI-670/50 PET GLOSS SILVER TC * AP900 WKPE144 Gloss silver metallised top coated polyester 70 50 High quality labels for appliances and nameplates.
RI-620/50 PET BRUSHED GLOSS SILVER TC AP906 WKPE144Gloss silver metallised top coated brushed polyester
70 50Decorative and industrial labels and nameplates where a silver brushed finish is required.
RI-630/36 PET VOID GLOSS SILVER TC ** AP901 WKPE144Gloss silver metallised top coated polyester with VOID pattern
50 36Tamperproof labels that contain on the underside a security release pattern. It is impossible to remove the labels in one piece and the destroyed pattern indicates tampering.
RI-650/23 PET MATT SILVER TC AP900 WKPE144 Matt silver metallised top coated polyester 32 23High quality labels for appliances and nameplates, where a matt finish combined with a low thickness is required.
RI-650/36 PET MATT SILVER TC AP900 WKPE144 Matt silver metallised top coated polyester 50 36High quality labels for appliances and nameplates, where a matt finish is required.
* Available also in 75µ.** Available also with CHAIN pattern.
Solid Aluminium Foils
RI-500/40 ALUMINIUM GLOSS SILVER TC AP905 WKPE144 Gloss silver top coated solid aluminium foil 110 40Nameplates, industrial instructions labels for electrical appliances and motors with very good temperature resistance. Suitable for labels requiring embossable variable data.
RI-500/40 ALUMINIUM MATT SILVER TC AP905 WKPE144 Matt silver top coated solid aluminium foil 110 40Nameplates, industrial instructions labels for electrical appliances and motors with very good temperature resistance. Suitable for labels requiring embossable variable data.
Double Side AdhesivesDS-PET CLEAR AP902
WK135/WG90
Gloss clear polyester 17 12 To make adhesive all sorts of materials, unless paper, by lamination.
DS-PAPER WHITE AP902 WK85/WK85
White paper 62 55To make adhesive boards and other paper products by lamination. Ideal for samples collections.
BIADESIVO NATURAL 280 AP904WK85/WK85
White natural paper board 280 320 Specific to produce photo albums.
PapersLITHO 70 AP904 WK85 White calendered woodfree paper 70 78 General and promotional labels.
VELLUM SC AP904 WK85 White calandered woodfree paper 73 75 General and promotional labels.
SEMIGLOSS 80 AP904 WK85Semi-gloss white calendered woodfree coated paper
80 65 General and promotional labels, where a semi-gloss finish is required.
GLOSS 80 AP904 WK85 Gloss white coated woodfree paper 80 64 High quality general and promotional labels.
CAST GLOSS 80 AP904 WK85 CAST gloss white coated woodfree paper 80 80 Superior quality general and promotional labels.
MATT COATED 80 AP904 WK85 Matt white coated woodfree paper 80 74 General and promotional labels, where a matt finish is required.
GLOSS STICKER AR804 WK85 Gloss white calendered woodfree paper 80 64Album stickers which, after application, can be repositioned for a short period of time.
BoardsLITHO 170 AP904 WK85 Matt white woodfree paper board 170 215 Good stiffness labels, ideal for samples collection folders.
CAST GLOSS 180 AP904 WK85CAST gloss white coated woodfree high weight paper board
180 220 High quality good stiffness labels.
CAST GLOSS 300 AP904 WK85CAST gloss white coated woodfree high weight paper board
300 340 High quality good stiffness labels.
SpecialitiesRASO WHITE RP1005 WK135 Gloss white acetate satin fabric 120 140 Fabrics, shoes, cards, mattress labels and promotional stickers.
RI-1900/50 PVC ULTRADESTRUCTIBLE GLOSS WHITE ASP WKPE144 CAST gloss white ultradestructible vinyl 100 50Tamperproof labels that once applied have the characteristic of being ultra-destructible when tampered with, as the frontal face tears as pressure is applied.
RI-1960/50 PVC ULTRADESTRUCTIBLE MATT WHITE ASP WKPE144 CAST matt white ultradestructible vinyl 100 50Tamperproof labels that once applied have the characteristic of being ultra-destructible when tampered with, as the frontal face tears as pressure is applied..
Adhesive name Main application TypeDirect sunlight
resistance
Temperature
CohesionTack FTM9
N/INCH²
Ultimate adhesion
FTM2 N/INCH
Food contact Approvals
RemarksApplication minimum °C
Service °C ISEGA FDA
Filmic face materials
AP900General purpose mainly on filmic face materials.
Pure acrylic Excellent +10 -30 +120 Very High 7 9 175.105
Acrylic permanent adhesive featuring high clarity and very high cohesion. Designed for a wide variety of substrates such as glass, ABS, PS, PVC. Unsuitable for apolar surfaces (like PE and PP). Also available with coloured pigments.
AP901General purpose mainly on filmic face materials.
Pure acrylic Excellent -5 -40 +120 High 8 7Dry and Moist direct
175.105Acrylic permanent adhesive featuring high clarity and cohesion with strong adhesion to apolar substrates (like PE and PP).
AP902General purpose mainly on filmic face materials.
Pure acrylic Good +5 -20 +100 Medium 11 10 175.105
Acrylic permanent adhesive featuring good clarity. Excellent adhesion on a wide variety of substrates, including apolar ones (like PE and PP). This adhesive can be used on slightly rough surfaces.
AP905Suitable mainly on filmic face materials.
Pure acrylic Excellent +10 -40 +120 Very High 15 12 175.105Acrylic permanent adhesive featuring water, steam and temperature resistance.
AP906Suitable for doming and stickers.
Pure acrylic Excellent +10 -40 +140 Very High 15 7 175.105
Acrylic permanent adhesive featuring very good ultimate adhesion and excellent cohesion even at high temperatures. Not recommended on apolar substrates (like PE and PP).Also avaiable with coloured pigments.
ASP30Suitable for temporary applications
Modified Acrylic
Good +10 -30 +120 Medium 2 6 Semipermanent adhesive repositionable and easy to remove after application, when opacity is required.
RP1005General purpose mainly on synthetic filmic face materials
Rubber Permanent
Medium +5 -20 +70 High 20 11 Rubber based permanent adhesive with high tack and adhesion on rough, difficult and apolar (like PE and PP) substrates.
AR801General purpose mainly on filmic face materials.
Modified Acrylic
Medium +5 -40 +120 High 2 2 175.105
Acrylic removable adhesive featuring good clarity and clean removability from glass, laminated plastics and crosslinked enamels. Not suitable for application on papers, PVC and air dried paints and varnishes.
Paper face materials
AP904General purpose mainly on filmic face materials.
Modified acrylic
Good +5 -40 +100 Medium 13 11Dry and Moist direct
175.105Acrylic permanent adhesive. Good adhesion on a wide variety of materials including apolar substrates (like PE and PP).
AR804General purpose mainly on filmic face materials.
Modified acrylic
Good +10 -30 +100 High 4 5Acrylic semipermanent adhesive that can be removed after a short period of time after application.
All values given in the data sheet are typical. The information are based upon tests believed to be reliable, even if this does not constitute a warranty.
PROMOTIONAL LINERS
NAME ACRONYM COLOUR DESCRIPTION WEIGHT g/m² THICKNESS µ
Glassine 90* WG90 White One side siliconised supercalendered Glassine 90 77
Kraft 85 WK85 White One side siliconised clay coated Kraft 85 87
Kraft 100 WK100 White One side siliconised clay coated Kraft 100 108
Kraft 135 WK135 White One side siliconised clay coated Kraft 135 145
PE Kraft 144 WKPE144 White One side silicone coated two side PE coated Kraft 144 155
Board 200 BRD200 White Cast coated board 200 255
* Liner available only for RI-121/200 PVC embossed gloss clear.
PROMOTIONAL SERIES PROMOTIONAL SERIES PROMOTIONAL ADHESIVES
PRODUCT NAME ADHESIVE LINER FACE MATERIALWEIGHT
g/m²THICKNESS µ APPLICATIONS
Soft VinylsRI-140/80 PVC GLOSS WHITE AP900 WKPE144 Gloss white soft vinyl 110 80 Labels, stickers and p.o.p. advertising with medium outdoor durability.
RI-145/80 PVC GLOSS WHITE*AP900 - AR801-
AP902WK135 Gloss white soft vinyl 110 80 Labels, stickers and p.o.p. advertising with medium outdoor durability.
RI-175/200 PVC GLOSS WHITE AP900 WK135 Gloss white soft vinyl 260 200 Labels and stickers requiring high thickness and easy application.
RI-165/80 PVC MATT WHITE* AP900 WK135 Matt white soft vinyl 110 80 Labels, stickers and p.o.p. advertising with medium outdoor durability.
RI-205/80 PVC GLOSS CLEAR**AP900 - AR801-
AP902WK135 Gloss clear soft vinyl 104 80
Promotional labels, big size window stickers and electrowelded pouches.
RI-205/100 PVC GLOSS CLEAR** AP900 - AR801 WK135 Gloss clear soft vinyl 130 100Promotional labels, big size window stickers and electrowelded pouches.
RI-275/200 PVC GLOSS CLEAR AP900 WK135 Gloss clear soft vinyl 260 200 Labels and stickers requiring high thickness and easy application.
RI-265/80 PVC MATT CLEAR AP900 WK135 Matt clear soft vinyl 110 80Labels, stickers and p.o.p. advertising requiring a matt finish with medium outdoor durability.
RI-145/70 PVC GLOSS WARM YELLOW *** AP900 WK135 Gloss warm yellow soft vinyl 97 70 P.o.p. labels, industrial marking and decorations.
RI-145/70 PVC GLOSS COLD YELLOW *** AP900 WK135 Gloss cold yellow soft vinyl 97 70 P.o.p. labels, industrial marking and decorations.
RI-145/70 PVC GLOSS GREEN *** AP900 WK135 Gloss green soft vinyl 97 70 P.o.p. labels, industrial marking and decorations.
RI-405/80 PVC PHTHALATEFREE GLOSS WHITE AP902 WK135 Gloss white phthalatefree soft vinyl 104 80 Labels for children toys and promotional labels.
RI-405/80 PVC PHTHALATEFREE MATT WHITE AP902 WK135 Matt white phthalatefree soft vinyl 104 80 Labels for children toys and promotional labels.
RI-405/80 PVC PHTHALATEFREE GLOSS CLEAR AP902 WK135 Gloss clear phthalatefree soft vinyl 104 80 Labels for children toys and promotional labels.
RI-140/100 PVC GLOSS WHITE FLOOR TALKER AP906 GREY WKPE144 Gloss white soft vinyl 134 100For promotional labels and floor talkers (to use in combination with the overlaminating film RI-121/200).
RI-121/200 PVC EMBOSSED GLOSS CLEAR AP906 WG90 Gloss clear embossed scuff resistant soft vinyl 268 200Floor talker overlaminating film, slip resistant in accordance with “The Assessment of Floor Slip Resistance”- Issue 3 2005 by the UK Slip Resistance Group.
PROMO-RI-VIEW PVC PERFORATED GLOSS WHITE ASP30 WK135Black and white perforated 40% open area soft vinyl
170 145Outdoor and transit advertising, including p.o.p. displays and attractive window glazing. Certified by Kraftfahrt-Bundesamt ABG number D 5440 dated 05.03.2008.
RI-459 PVC PHOTOLUMINESCENT AP905 WKPE144 Photoluminescent soft vinyl 515 380Wall decorative stickers and photoluminescent safety signage. Luminance method DIN 67510-1: After 10 Min/101.5 mcd; After 60 Min 11.9 mcd.
* Also available with RI-LINE. The AP900 black is available under request.** Also available with RI-LINE .*** Also available in red, blue and black colours.
Rigid VinylsRI-100/90 PVC GLOSS WHITE AP900 WKPE144 Gloss white rigid vinyl 125 90 Advertising labels and marking specialties.
RI-150/190 PVC GLOSS WHITE AP900 WKPE144 Gloss white rigid vinyl 265 190Advertising labels and marking specialties, where a high thickness is required.
RI-300/90 PVC MATT WHITE AP900 WKPE144 Matt white rigid vinyl 125 90 Advertising labels and marking specialties.
RI-230/80 PVC GLOSS CLEAR AP900 WKPE144 Gloss clear rigid vinyl 110 80 Temporary p.o.p. advertising, marking labels and windows stickers.
RI-210/80 PVC GLOSS SILVER AP900 WKPE144 Gloss silver metallised rigid vinyl 105 80Advertising specialties, high quality metallic decorations and promotional labels.
RI-220/80 PVC GLOSS GOLD AP900 WKPE144 Gloss gold metallised rigid vinyl 105 80Advertising specialties, high quality metallic decorations and promotional labels.
Static Cling FilmsRI-4519/150 PREMIUM PVC GLOSS WHITE - BRD200 Gloss white static cling vinyl 170 150
Advertising specialties such as retail window signage, promotional displays and decorations.
RI-4519/150 PREMIUM PVC GLOSS CLEAR - BRD200 Gloss clear static cling vinyl 170 150Advertising specialties such as retail window signage, promotional displays and decorations.
PolypropylenesRI-705/60 PP GLOSS CLEAR TC AP900 - AR801 WK135 Gloss clear top coated polypropylene 54 60 Promotional and marking labels and p.o.p. advertising.
RI-705/60 PP GLOSS WHITE TC AP900 - AR801 WK135 Gloss white top coated polypropylene 54 60 Promotional and marking labels and p.o.p. advertising.
PRODUCT NAME ADHESIVE LINER FACE MATERIALWEIGHT
g/m²THICKNESS
µAPPLICATIONS
PolyestersLASER FIT PET 50 GLOSS CLEAR TC AP901 WK100
Gloss clear top coated thermostabilized polyester
70 50Office informative labels (like archives or files) and labelling in the logistic field (like identification or signalization labelling).
LASER FIT PET 50 GLOSS WHITE TC AP901 WK100Gloss white top coated thermostabilized polyester
70 50Office informative labels (like archives or files) and labelling in the logistic field (like identification or signalization labelling).
RI-600/23 PET GLOSS CLEAR TC AP900 WKPE144 Gloss clear top coated polyester 32 23Outdoor and indoor promotional and decorative labels where a low thickness is required.
RI-600/36 PET GLOSS CLEAR TC AP900 WKPE144 Gloss clear top coated polyester 50 36Labels for over flating applications in the cycles and motorcycles industry, where high aesthetic and durability is required.
RI-670/23 PET GLOSS SILVER TC AP900 WKPE144 Gloss silver metallised top coated polyester 33 23 High quality labels for appliances and nameplates.
RI-670/36 PET GLOSS SILVER TC AP900 WKPE144 Gloss silver metallised top coated polyester 50 36 High quality labels for appliances and nameplates.
RI-670/50 PET GLOSS SILVER TC * AP900 WKPE144 Gloss silver metallised top coated polyester 70 50 High quality labels for appliances and nameplates.
RI-620/50 PET BRUSHED GLOSS SILVER TC AP906 WKPE144Gloss silver metallised top coated brushed polyester
70 50Decorative and industrial labels and nameplates where a silver brushed finish is required.
RI-630/36 PET VOID GLOSS SILVER TC ** AP901 WKPE144Gloss silver metallised top coated polyester with VOID pattern
50 36Tamperproof labels that contain on the underside a security release pattern. It is impossible to remove the labels in one piece and the destroyed pattern indicates tampering.
RI-650/23 PET MATT SILVER TC AP900 WKPE144 Matt silver metallised top coated polyester 32 23High quality labels for appliances and nameplates, where a matt finish combined with a low thickness is required.
RI-650/36 PET MATT SILVER TC AP900 WKPE144 Matt silver metallised top coated polyester 50 36High quality labels for appliances and nameplates, where a matt finish is required.
* Available also in 75µ.** Available also with CHAIN pattern.
Solid Aluminium Foils
RI-500/40 ALUMINIUM GLOSS SILVER TC AP905 WKPE144 Gloss silver top coated solid aluminium foil 110 40Nameplates, industrial instructions labels for electrical appliances and motors with very good temperature resistance. Suitable for labels requiring embossable variable data.
RI-500/40 ALUMINIUM MATT SILVER TC AP905 WKPE144 Matt silver top coated solid aluminium foil 110 40Nameplates, industrial instructions labels for electrical appliances and motors with very good temperature resistance. Suitable for labels requiring embossable variable data.
Double Side AdhesivesDS-PET CLEAR AP902
WK135/WG90
Gloss clear polyester 17 12 To make adhesive all sorts of materials, unless paper, by lamination.
DS-PAPER WHITE AP902 WK85/WK85
White paper 62 55To make adhesive boards and other paper products by lamination. Ideal for samples collections.
BIADESIVO NATURAL 280 AP904WK85/WK85
White natural paper board 280 320 Specific to produce photo albums.
PapersLITHO 70 AP904 WK85 White calendered woodfree paper 70 78 General and promotional labels.
VELLUM SC AP904 WK85 White calandered woodfree paper 73 75 General and promotional labels.
SEMIGLOSS 80 AP904 WK85Semi-gloss white calendered woodfree coated paper
80 65 General and promotional labels, where a semi-gloss finish is required.
GLOSS 80 AP904 WK85 Gloss white coated woodfree paper 80 64 High quality general and promotional labels.
CAST GLOSS 80 AP904 WK85 CAST gloss white coated woodfree paper 80 80 Superior quality general and promotional labels.
MATT COATED 80 AP904 WK85 Matt white coated woodfree paper 80 74 General and promotional labels, where a matt finish is required.
GLOSS STICKER AR804 WK85 Gloss white calendered woodfree paper 80 64Album stickers which, after application, can be repositioned for a short period of time.
BoardsLITHO 170 AP904 WK85 Matt white woodfree paper board 170 215 Good stiffness labels, ideal for samples collection folders.
CAST GLOSS 180 AP904 WK85CAST gloss white coated woodfree high weight paper board
180 220 High quality good stiffness labels.
CAST GLOSS 300 AP904 WK85CAST gloss white coated woodfree high weight paper board
300 340 High quality good stiffness labels.
SpecialitiesRASO WHITE RP1005 WK135 Gloss white acetate satin fabric 120 140 Fabrics, shoes, cards, mattress labels and promotional stickers.
RI-1900/50 PVC ULTRADESTRUCTIBLE GLOSS WHITE ASP WKPE144 CAST gloss white ultradestructible vinyl 100 50Tamperproof labels that once applied have the characteristic of being ultra-destructible when tampered with, as the frontal face tears as pressure is applied.
RI-1960/50 PVC ULTRADESTRUCTIBLE MATT WHITE ASP WKPE144 CAST matt white ultradestructible vinyl 100 50Tamperproof labels that once applied have the characteristic of being ultra-destructible when tampered with, as the frontal face tears as pressure is applied..
Adhesive name Main application TypeDirect sunlight
resistance
Temperature
CohesionTack FTM9
N/INCH²
Ultimate adhesion
FTM2 N/INCH
Food contact Approvals
RemarksApplication minimum °C
Service °C ISEGA FDA
Filmic face materials
AP900General purpose mainly on filmic face materials.
Pure acrylic Excellent +10 -30 +120 Very High 7 9 175.105
Acrylic permanent adhesive featuring high clarity and very high cohesion. Designed for a wide variety of substrates such as glass, ABS, PS, PVC. Unsuitable for apolar surfaces (like PE and PP). Also available with coloured pigments.
AP901General purpose mainly on filmic face materials.
Pure acrylic Excellent -5 -40 +120 High 8 7Dry and Moist direct
175.105Acrylic permanent adhesive featuring high clarity and cohesion with strong adhesion to apolar substrates (like PE and PP).
AP902General purpose mainly on filmic face materials.
Pure acrylic Good +5 -20 +100 Medium 11 10 175.105
Acrylic permanent adhesive featuring good clarity. Excellent adhesion on a wide variety of substrates, including apolar ones (like PE and PP). This adhesive can be used on slightly rough surfaces.
AP905Suitable mainly on filmic face materials.
Pure acrylic Excellent +10 -40 +120 Very High 15 12 175.105Acrylic permanent adhesive featuring water, steam and temperature resistance.
AP906Suitable for doming and stickers.
Pure acrylic Excellent +10 -40 +140 Very High 15 7 175.105
Acrylic permanent adhesive featuring very good ultimate adhesion and excellent cohesion even at high temperatures. Not recommended on apolar substrates (like PE and PP).Also avaiable with coloured pigments.
ASP30Suitable for temporary applications
Modified Acrylic
Good +10 -30 +120 Medium 2 6 Semipermanent adhesive repositionable and easy to remove after application, when opacity is required.
RP1005General purpose mainly on synthetic filmic face materials
Rubber Permanent
Medium +5 -20 +70 High 20 11 Rubber based permanent adhesive with high tack and adhesion on rough, difficult and apolar (like PE and PP) substrates.
AR801General purpose mainly on filmic face materials.
Modified Acrylic
Medium +5 -40 +120 High 2 2 175.105
Acrylic removable adhesive featuring good clarity and clean removability from glass, laminated plastics and crosslinked enamels. Not suitable for application on papers, PVC and air dried paints and varnishes.
Paper face materials
AP904General purpose mainly on filmic face materials.
Modified acrylic
Good +5 -40 +100 Medium 13 11Dry and Moist direct
175.105Acrylic permanent adhesive. Good adhesion on a wide variety of materials including apolar substrates (like PE and PP).
AR804General purpose mainly on filmic face materials.
Modified acrylic
Good +10 -30 +100 High 4 5Acrylic semipermanent adhesive that can be removed after a short period of time after application.
All values given in the data sheet are typical. The information are based upon tests believed to be reliable, even if this does not constitute a warranty.
PROMOTIONAL LINERS
NAME ACRONYM COLOUR DESCRIPTION WEIGHT g/m² THICKNESS µ
Glassine 90* WG90 White One side siliconised supercalendered Glassine 90 77
Kraft 85 WK85 White One side siliconised clay coated Kraft 85 87
Kraft 100 WK100 White One side siliconised clay coated Kraft 100 108
Kraft 135 WK135 White One side siliconised clay coated Kraft 135 145
PE Kraft 144 WKPE144 White One side silicone coated two side PE coated Kraft 144 155
Board 200 BRD200 White Cast coated board 200 255
* Liner available only for RI-121/200 PVC embossed gloss clear.
PROMOTIONAL SERIES PROMOTIONAL SERIES PROMOTIONAL ADHESIVES
PRODUCT NAME ADHESIVE LINER FACE MATERIALWEIGHT
g/m²THICKNESS µ APPLICATIONS
Soft VinylsRI-140/80 PVC GLOSS WHITE AP900 WKPE144 Gloss white soft vinyl 110 80 Labels, stickers and p.o.p. advertising with medium outdoor durability.
RI-145/80 PVC GLOSS WHITE*AP900 - AR801-
AP902WK135 Gloss white soft vinyl 110 80 Labels, stickers and p.o.p. advertising with medium outdoor durability.
RI-175/200 PVC GLOSS WHITE AP900 WK135 Gloss white soft vinyl 260 200 Labels and stickers requiring high thickness and easy application.
RI-165/80 PVC MATT WHITE* AP900 WK135 Matt white soft vinyl 110 80 Labels, stickers and p.o.p. advertising with medium outdoor durability.
RI-205/80 PVC GLOSS CLEAR**AP900 - AR801-
AP902WK135 Gloss clear soft vinyl 104 80
Promotional labels, big size window stickers and electrowelded pouches.
RI-205/100 PVC GLOSS CLEAR** AP900 - AR801 WK135 Gloss clear soft vinyl 130 100Promotional labels, big size window stickers and electrowelded pouches.
RI-275/200 PVC GLOSS CLEAR AP900 WK135 Gloss clear soft vinyl 260 200 Labels and stickers requiring high thickness and easy application.
RI-265/80 PVC MATT CLEAR AP900 WK135 Matt clear soft vinyl 110 80Labels, stickers and p.o.p. advertising requiring a matt finish with medium outdoor durability.
RI-145/70 PVC GLOSS WARM YELLOW *** AP900 WK135 Gloss warm yellow soft vinyl 97 70 P.o.p. labels, industrial marking and decorations.
RI-145/70 PVC GLOSS COLD YELLOW *** AP900 WK135 Gloss cold yellow soft vinyl 97 70 P.o.p. labels, industrial marking and decorations.
RI-145/70 PVC GLOSS GREEN *** AP900 WK135 Gloss green soft vinyl 97 70 P.o.p. labels, industrial marking and decorations.
RI-405/80 PVC PHTHALATEFREE GLOSS WHITE AP902 WK135 Gloss white phthalatefree soft vinyl 104 80 Labels for children toys and promotional labels.
RI-405/80 PVC PHTHALATEFREE MATT WHITE AP902 WK135 Matt white phthalatefree soft vinyl 104 80 Labels for children toys and promotional labels.
RI-405/80 PVC PHTHALATEFREE GLOSS CLEAR AP902 WK135 Gloss clear phthalatefree soft vinyl 104 80 Labels for children toys and promotional labels.
RI-140/100 PVC GLOSS WHITE FLOOR TALKER AP906 GREY WKPE144 Gloss white soft vinyl 134 100For promotional labels and floor talkers (to use in combination with the overlaminating film RI-121/200).
RI-121/200 PVC EMBOSSED GLOSS CLEAR AP906 WG90 Gloss clear embossed scuff resistant soft vinyl 268 200Floor talker overlaminating film, slip resistant in accordance with “The Assessment of Floor Slip Resistance”- Issue 3 2005 by the UK Slip Resistance Group.
PROMO-RI-VIEW PVC PERFORATED GLOSS WHITE ASP30 WK135Black and white perforated 40% open area soft vinyl
170 145Outdoor and transit advertising, including p.o.p. displays and attractive window glazing. Certified by Kraftfahrt-Bundesamt ABG number D 5440 dated 05.03.2008.
RI-459 PVC PHOTOLUMINESCENT AP905 WKPE144 Photoluminescent soft vinyl 515 380Wall decorative stickers and photoluminescent safety signage. Luminance method DIN 67510-1: After 10 Min/101.5 mcd; After 60 Min 11.9 mcd.
* Also available with RI-LINE. The AP900 black is available under request.** Also available with RI-LINE .*** Also available in red, blue and black colours.
Rigid VinylsRI-100/90 PVC GLOSS WHITE AP900 WKPE144 Gloss white rigid vinyl 125 90 Advertising labels and marking specialties.
RI-150/190 PVC GLOSS WHITE AP900 WKPE144 Gloss white rigid vinyl 265 190Advertising labels and marking specialties, where a high thickness is required.
RI-300/90 PVC MATT WHITE AP900 WKPE144 Matt white rigid vinyl 125 90 Advertising labels and marking specialties.
RI-230/80 PVC GLOSS CLEAR AP900 WKPE144 Gloss clear rigid vinyl 110 80 Temporary p.o.p. advertising, marking labels and windows stickers.
RI-210/80 PVC GLOSS SILVER AP900 WKPE144 Gloss silver metallised rigid vinyl 105 80Advertising specialties, high quality metallic decorations and promotional labels.
RI-220/80 PVC GLOSS GOLD AP900 WKPE144 Gloss gold metallised rigid vinyl 105 80Advertising specialties, high quality metallic decorations and promotional labels.
Static Cling FilmsRI-4519/150 PREMIUM PVC GLOSS WHITE - BRD200 Gloss white static cling vinyl 170 150
Advertising specialties such as retail window signage, promotional displays and decorations.
RI-4519/150 PREMIUM PVC GLOSS CLEAR - BRD200 Gloss clear static cling vinyl 170 150Advertising specialties such as retail window signage, promotional displays and decorations.
PolypropylenesRI-705/60 PP GLOSS CLEAR TC AP900 - AR801 WK135 Gloss clear top coated polypropylene 54 60 Promotional and marking labels and p.o.p. advertising.
RI-705/60 PP GLOSS WHITE TC AP900 - AR801 WK135 Gloss white top coated polypropylene 54 60 Promotional and marking labels and p.o.p. advertising.
PRODUCT NAME ADHESIVE LINER FACE MATERIALWEIGHT
g/m²THICKNESS
µAPPLICATIONS
PolyestersLASER FIT PET 50 GLOSS CLEAR TC AP901 WK100
Gloss clear top coated thermostabilized polyester
70 50Office informative labels (like archives or files) and labelling in the logistic field (like identification or signalization labelling).
LASER FIT PET 50 GLOSS WHITE TC AP901 WK100Gloss white top coated thermostabilized polyester
70 50Office informative labels (like archives or files) and labelling in the logistic field (like identification or signalization labelling).
RI-600/23 PET GLOSS CLEAR TC AP900 WKPE144 Gloss clear top coated polyester 32 23Outdoor and indoor promotional and decorative labels where a low thickness is required.
RI-600/36 PET GLOSS CLEAR TC AP900 WKPE144 Gloss clear top coated polyester 50 36Labels for over flating applications in the cycles and motorcycles industry, where high aesthetic and durability is required.
RI-670/23 PET GLOSS SILVER TC AP900 WKPE144 Gloss silver metallised top coated polyester 33 23 High quality labels for appliances and nameplates.
RI-670/36 PET GLOSS SILVER TC AP900 WKPE144 Gloss silver metallised top coated polyester 50 36 High quality labels for appliances and nameplates.
RI-670/50 PET GLOSS SILVER TC * AP900 WKPE144 Gloss silver metallised top coated polyester 70 50 High quality labels for appliances and nameplates.
RI-620/50 PET BRUSHED GLOSS SILVER TC AP906 WKPE144Gloss silver metallised top coated brushed polyester
70 50Decorative and industrial labels and nameplates where a silver brushed finish is required.
RI-630/36 PET VOID GLOSS SILVER TC ** AP901 WKPE144Gloss silver metallised top coated polyester with VOID pattern
50 36Tamperproof labels that contain on the underside a security release pattern. It is impossible to remove the labels in one piece and the destroyed pattern indicates tampering.
RI-650/23 PET MATT SILVER TC AP900 WKPE144 Matt silver metallised top coated polyester 32 23High quality labels for appliances and nameplates, where a matt finish combined with a low thickness is required.
RI-650/36 PET MATT SILVER TC AP900 WKPE144 Matt silver metallised top coated polyester 50 36High quality labels for appliances and nameplates, where a matt finish is required.
* Available also in 75µ.** Available also with CHAIN pattern.
Solid Aluminium Foils
RI-500/40 ALUMINIUM GLOSS SILVER TC AP905 WKPE144 Gloss silver top coated solid aluminium foil 110 40Nameplates, industrial instructions labels for electrical appliances and motors with very good temperature resistance. Suitable for labels requiring embossable variable data.
RI-500/40 ALUMINIUM MATT SILVER TC AP905 WKPE144 Matt silver top coated solid aluminium foil 110 40Nameplates, industrial instructions labels for electrical appliances and motors with very good temperature resistance. Suitable for labels requiring embossable variable data.
Double Side AdhesivesDS-PET CLEAR AP902
WK135/WG90
Gloss clear polyester 17 12 To make adhesive all sorts of materials, unless paper, by lamination.
DS-PAPER WHITE AP902 WK85/WK85
White paper 62 55To make adhesive boards and other paper products by lamination. Ideal for samples collections.
BIADESIVO NATURAL 280 AP904WK85/WK85
White natural paper board 280 320 Specific to produce photo albums.
PapersLITHO 70 AP904 WK85 White calendered woodfree paper 70 78 General and promotional labels.
VELLUM SC AP904 WK85 White calandered woodfree paper 73 75 General and promotional labels.
SEMIGLOSS 80 AP904 WK85Semi-gloss white calendered woodfree coated paper
80 65 General and promotional labels, where a semi-gloss finish is required.
GLOSS 80 AP904 WK85 Gloss white coated woodfree paper 80 64 High quality general and promotional labels.
CAST GLOSS 80 AP904 WK85 CAST gloss white coated woodfree paper 80 80 Superior quality general and promotional labels.
MATT COATED 80 AP904 WK85 Matt white coated woodfree paper 80 74 General and promotional labels, where a matt finish is required.
GLOSS STICKER AR804 WK85 Gloss white calendered woodfree paper 80 64Album stickers which, after application, can be repositioned for a short period of time.
BoardsLITHO 170 AP904 WK85 Matt white woodfree paper board 170 215 Good stiffness labels, ideal for samples collection folders.
CAST GLOSS 180 AP904 WK85CAST gloss white coated woodfree high weight paper board
180 220 High quality good stiffness labels.
CAST GLOSS 300 AP904 WK85CAST gloss white coated woodfree high weight paper board
300 340 High quality good stiffness labels.
SpecialitiesRASO WHITE RP1005 WK135 Gloss white acetate satin fabric 120 140 Fabrics, shoes, cards, mattress labels and promotional stickers.
RI-1900/50 PVC ULTRADESTRUCTIBLE GLOSS WHITE ASP WKPE144 CAST gloss white ultradestructible vinyl 100 50Tamperproof labels that once applied have the characteristic of being ultra-destructible when tampered with, as the frontal face tears as pressure is applied.
RI-1960/50 PVC ULTRADESTRUCTIBLE MATT WHITE ASP WKPE144 CAST matt white ultradestructible vinyl 100 50Tamperproof labels that once applied have the characteristic of being ultra-destructible when tampered with, as the frontal face tears as pressure is applied..
Adhesive name Main application TypeDirect sunlight
resistance
Temperature
CohesionTack FTM9
N/INCH²
Ultimate adhesion
FTM2 N/INCH
Food contact Approvals
RemarksApplication minimum °C
Service °C ISEGA FDA
Filmic face materials
AP900General purpose mainly on filmic face materials.
Pure acrylic Excellent +10 -30 +120 Very High 7 9 175.105
Acrylic permanent adhesive featuring high clarity and very high cohesion. Designed for a wide variety of substrates such as glass, ABS, PS, PVC. Unsuitable for apolar surfaces (like PE and PP). Also available with coloured pigments.
AP901General purpose mainly on filmic face materials.
Pure acrylic Excellent -5 -40 +120 High 8 7Dry and Moist direct
175.105Acrylic permanent adhesive featuring high clarity and cohesion with strong adhesion to apolar substrates (like PE and PP).
AP902General purpose mainly on filmic face materials.
Pure acrylic Good +5 -20 +100 Medium 11 10 175.105
Acrylic permanent adhesive featuring good clarity. Excellent adhesion on a wide variety of substrates, including apolar ones (like PE and PP). This adhesive can be used on slightly rough surfaces.
AP905Suitable mainly on filmic face materials.
Pure acrylic Excellent +10 -40 +120 Very High 15 12 175.105Acrylic permanent adhesive featuring water, steam and temperature resistance.
AP906Suitable for doming and stickers.
Pure acrylic Excellent +10 -40 +140 Very High 15 7 175.105
Acrylic permanent adhesive featuring very good ultimate adhesion and excellent cohesion even at high temperatures. Not recommended on apolar substrates (like PE and PP).Also avaiable with coloured pigments.
ASP30Suitable for temporary applications
Modified Acrylic
Good +10 -30 +120 Medium 2 6 Semipermanent adhesive repositionable and easy to remove after application, when opacity is required.
RP1005General purpose mainly on synthetic filmic face materials
Rubber Permanent
Medium +5 -20 +70 High 20 11 Rubber based permanent adhesive with high tack and adhesion on rough, difficult and apolar (like PE and PP) substrates.
AR801General purpose mainly on filmic face materials.
Modified Acrylic
Medium +5 -40 +120 High 2 2 175.105
Acrylic removable adhesive featuring good clarity and clean removability from glass, laminated plastics and crosslinked enamels. Not suitable for application on papers, PVC and air dried paints and varnishes.
Paper face materials
AP904General purpose mainly on filmic face materials.
Modified acrylic
Good +5 -40 +100 Medium 13 11Dry and Moist direct
175.105Acrylic permanent adhesive. Good adhesion on a wide variety of materials including apolar substrates (like PE and PP).
AR804General purpose mainly on filmic face materials.
Modified acrylic
Good +10 -30 +100 High 4 5Acrylic semipermanent adhesive that can be removed after a short period of time after application.
All values given in the data sheet are typical. The information are based upon tests believed to be reliable, even if this does not constitute a warranty.
PROMOTIONAL LINERS
NAME ACRONYM COLOUR DESCRIPTION WEIGHT g/m² THICKNESS µ
Glassine 90* WG90 White One side siliconised supercalendered Glassine 90 77
Kraft 85 WK85 White One side siliconised clay coated Kraft 85 87
Kraft 100 WK100 White One side siliconised clay coated Kraft 100 108
Kraft 135 WK135 White One side siliconised clay coated Kraft 135 145
PE Kraft 144 WKPE144 White One side silicone coated two side PE coated Kraft 144 155
Board 200 BRD200 White Cast coated board 200 255
* Liner available only for RI-121/200 PVC embossed gloss clear.
w w w . r i t r a m a . c o m
GENERAL INFORMATION
Product Range
The product range represents the most typical applications. Many other constructions, according to specific customer requests, can be developed by our Technical Department.
All Ritrama products are subject to strict manufacturing controls to guarantee good quality products. All statements and technical information published in this document are based upon tests believed to be reliable, even if this does not constitute a warranty.
Considering all the possible uses of Ritrama products, the purchaser should make sure that the products fit for the purpose they are intended to be used.
Quality & Approvals
Ritrama products are manufactured to high quality standards and certified to ISO 9001:2008. All sheet products, with exception of those made using our standard red vinyl, comply with the requirements of:_ Packaging and Packaging waste directive 94/62/EC Art.11 (EEC). _ EN-71/3:2013 European Community Toy Safety Standard, restricting soluble metal content (EEC). _ EU Directive 2002/95/EC RoHS:_ EU Directive 1907/2006/EC Reach:
For specific information regarding certifications, please contact our Customer Information Service department or visit our website www.ritrama.com.
Sheets Size
Standard size for films and boards 70 X 100 cmStandard size for papers 70 X 100 cm or 50 X 70 cmOther sizes available under request only for papers (any other specific size can be provided according to quantity). 45 X 64 cm or 43 X 61 cm
RI-Line
Papers available with RI-Line: spacing 3,8 cm.PVC available with RI-Line: spacing 5 cm.
Recommended Storage Conditions
Please check all packaging on receipt of goods and inform the supplier immediately in case of shortage or damage. The material must be stored at a temperature of 22°C +/- 2°C and 50% of Relative Humidity. Do not store close to a heat source and do not expose to direct sun light.The storage area must be dry and clean. Turn the stock over using the oldest material. Please keep the material in the original packaging until required for use, in order to protect it from dust and contaminations. Boxes which are opened for partial use must be carefully closed again.
For further information please contact your Ritrama Sales representative or visit our website www.ritrama.com.Films papers & boards
T e c h n i c a l d a T a
Promotional range
www.ritrama.com
RITRAMA S.p.A. Viscom Slitting & Distribution CentreVia Senatore Simonetta, 2420867 Caponago (MB) - ITALYPh. +39 02 955 459.1Fax +39 02 955 [email protected]
RITRAMA S.p.A.Headquarters Roll Slitting & Distribution CentreVia Senatore Simonetta, 2420867 Caponago (MB) - ITALY Ph. +39 02 955 459.1Fax +39 02 955 [email protected]
RITRAMA S.p.A.Production CentrePolo Ind.le Berbentina60041 Sassoferrato (AN) - ITALYPh. +39 0732 97061Fax +39 0732 [email protected]
RITRAMA Inc.Production Centre800 Kasota Avenue SeMinneapolis MN 55414 - U.S.A.Ph. +1 612 378 2277Fax +1 612 378 9327Toll Free (800) 328 [email protected]
RITRAMA Inc.Production Centre341 Eddy RoadCleveland OH 44108 - U.S.A.Ph. +1 216 851.2300Fax +1 216 851.1938Toll Free (888) 362 [email protected]
RITRAMA S.p.A. Production CentreVia Brescia, 47/A20063 Cernusco sul Naviglio (MI) - ITALYPh. +39 02 923948.1Fax +39 02 [email protected]
RITRAMA MÉXICO Slitting & Distribution CentreMimosas #104 Col. Santa María Insurgentes06430 México D.F. - MÉXICO Ph. +52 55 2630 2516Fax +52 55 2630 [email protected]
RITRAMA UKRAINE Slitting & Distribution CentreUl. Novopirogovskaya, 64-A03045 Kiev - UKRAINEPh. +38 044 206 81 41Fax +38 044 206 81 [email protected]
RITRAMA POLAND Slitting & Distribution Centreul. Wrocławska 5356-410 Dobroszyce - POLANDPh. +48 71 314 46 95Fax +48 71 315 95 [email protected]
RITRAMA Inc.Slitting & Distribution Centre345 Eddy RoadCleveland OH 44108 - U.S.A. Toll Free (888) 362 [email protected]
RITRAMA COLOMBIA S.A.S.Slitting & Distribution CentreCalle 98 Sur # 48 -270 Bdg 18, Bodegas San SebastianLa Estrella, AntioquiaMedellín - COLOMBIAPh. +57 4 4445518Fax +57 4 [email protected]
RITRAMA S.A.Production & Distribution CentreAv. Tupungato 3420 - Lotes 39 y 40Parque Industrial CuraumaValparaíso - CHILEPh. +56 32 2996 304Fax +56 32 2996 [email protected]
RITRAMA S.A. Production & Distribution CentreAvda, Castell Barberà 30Polig. Ind. Santiga08210 Barberà del Valles - SPAIN Ph. +34 (0) 93 729 4998Fax +34 (0) 93 729 [email protected]
RITRAMA (UK) Ltd. Production & Distribution CentreTameside Park, Fifth AvenueDukinfield - East Manchester SK16 4PP UNITED KINGDOMPh. +44 (0) 161 786 1700Fax +44 (0) 161 786 [email protected]
RITRAMA (Hefei)Pressure-Sensitive Coated Materials Co. Ltd. Production & Distribution CentreQingluan Road, 33/35HEFEI Economic & Technological Development Zone Hefei 230601 - Anhui - CHINAPh. +86 551 638 79 747Fax +86 551 638 79 [email protected]
RITRAMA COSTA RICA S.A. Slitting & Distribution CentreDe Waterland 300N-200E-100SBodega #3 - La Asunción de BelénHeredia - COSTA RICAPh. +506 22392311Fax +506 [email protected]
RITRAMA AUTOADESIVO INDUSTRIA LTDA. Slitting & Distribution CentreRod.Vice Pref.Hermenegildo Tonolli 1500Bairro Fazgran - Jundiaí - SPCEP 13213-086 BRAZILPh. +55 11 4525 1123Fax +55 11 4525 [email protected]
RITRAMA GUATEMALA, S.A. Slitting & Distribution CentreAv. El Ferrocarril 19-97 - zona 12 Centro Empresarial El Cortijo I - Ofibodega 711Ciudad de Guatemala - GUATEMALAPh/Fax: +502 24745367 +502 [email protected]
Production Centre
Slitting & Distribution Centre
PR
OM
OT
ION
AL
TD
01.
15
w w w . r i t r a m a . c o m
GENERAL INFORMATION
Product Range
The product range represents the most typical applications. Many other constructions, according to specific customer requests, can be developed by our Technical Department.
All Ritrama products are subject to strict manufacturing controls to guarantee good quality products. All statements and technical information published in this document are based upon tests believed to be reliable, even if this does not constitute a warranty.
Considering all the possible uses of Ritrama products, the purchaser should make sure that the products fit for the purpose they are intended to be used.
Quality & Approvals
Ritrama products are manufactured to high quality standards and certified to ISO 9001:2008. All sheet products, with exception of those made using our standard red vinyl, comply with the requirements of:_ Packaging and Packaging waste directive 94/62/EC Art.11 (EEC). _ EN-71/3:2013 European Community Toy Safety Standard, restricting soluble metal content (EEC). _ EU Directive 2002/95/EC RoHS:_ EU Directive 1907/2006/EC Reach:
For specific information regarding certifications, please contact our Customer Information Service department or visit our website www.ritrama.com.
Sheets Size
Standard size for films and boards 70 X 100 cmStandard size for papers 70 X 100 cm or 50 X 70 cmOther sizes available under request only for papers (any other specific size can be provided according to quantity). 45 X 64 cm or 43 X 61 cm
RI-Line
Papers available with RI-Line: spacing 3,8 cm.PVC available with RI-Line: spacing 5 cm.
Recommended Storage Conditions
Please check all packaging on receipt of goods and inform the supplier immediately in case of shortage or damage. The material must be stored at a temperature of 22°C +/- 2°C and 50% of Relative Humidity. Do not store close to a heat source and do not expose to direct sun light.The storage area must be dry and clean. Turn the stock over using the oldest material. Please keep the material in the original packaging until required for use, in order to protect it from dust and contaminations. Boxes which are opened for partial use must be carefully closed again.
For further information please contact your Ritrama Sales representative or visit our website www.ritrama.com.Films papers & boards
T e c h n i c a l d a T a
Promotional range
www.ritrama.com
RITRAMA S.p.A. Viscom Slitting & Distribution CentreVia Senatore Simonetta, 2420867 Caponago (MB) - ITALYPh. +39 02 955 459.1Fax +39 02 955 [email protected]
RITRAMA S.p.A.Headquarters Roll Slitting & Distribution CentreVia Senatore Simonetta, 2420867 Caponago (MB) - ITALY Ph. +39 02 955 459.1Fax +39 02 955 [email protected]
RITRAMA S.p.A.Production CentrePolo Ind.le Berbentina60041 Sassoferrato (AN) - ITALYPh. +39 0732 97061Fax +39 0732 [email protected]
RITRAMA Inc.Production Centre800 Kasota Avenue SeMinneapolis MN 55414 - U.S.A.Ph. +1 612 378 2277Fax +1 612 378 9327Toll Free (800) 328 [email protected]
RITRAMA Inc.Production Centre341 Eddy RoadCleveland OH 44108 - U.S.A.Ph. +1 216 851.2300Fax +1 216 851.1938Toll Free (888) 362 [email protected]
RITRAMA S.p.A. Production CentreVia Brescia, 47/A20063 Cernusco sul Naviglio (MI) - ITALYPh. +39 02 923948.1Fax +39 02 [email protected]
RITRAMA MÉXICO Slitting & Distribution CentreMimosas #104 Col. Santa María Insurgentes06430 México D.F. - MÉXICO Ph. +52 55 2630 2516Fax +52 55 2630 [email protected]
RITRAMA UKRAINE Slitting & Distribution CentreUl. Novopirogovskaya, 64-A03045 Kiev - UKRAINEPh. +38 044 206 81 41Fax +38 044 206 81 [email protected]
RITRAMA POLAND Slitting & Distribution Centreul. Wrocławska 5356-410 Dobroszyce - POLANDPh. +48 71 314 46 95Fax +48 71 315 95 [email protected]
RITRAMA Inc.Slitting & Distribution Centre345 Eddy RoadCleveland OH 44108 - U.S.A. Toll Free (888) 362 [email protected]
RITRAMA COLOMBIA S.A.S.Slitting & Distribution CentreCalle 98 Sur # 48 -270 Bdg 18, Bodegas San SebastianLa Estrella, AntioquiaMedellín - COLOMBIAPh. +57 4 4445518Fax +57 4 [email protected]
RITRAMA S.A.Production & Distribution CentreAv. Tupungato 3420 - Lotes 39 y 40Parque Industrial CuraumaValparaíso - CHILEPh. +56 32 2996 304Fax +56 32 2996 [email protected]
RITRAMA S.A. Production & Distribution CentreAvda, Castell Barberà 30Polig. Ind. Santiga08210 Barberà del Valles - SPAIN Ph. +34 (0) 93 729 4998Fax +34 (0) 93 729 [email protected]
RITRAMA (UK) Ltd. Production & Distribution CentreTameside Park, Fifth AvenueDukinfield - East Manchester SK16 4PP UNITED KINGDOMPh. +44 (0) 161 786 1700Fax +44 (0) 161 786 [email protected]
RITRAMA (Hefei)Pressure-Sensitive Coated Materials Co. Ltd. Production & Distribution CentreQingluan Road, 33/35HEFEI Economic & Technological Development Zone Hefei 230601 - Anhui - CHINAPh. +86 551 638 79 747Fax +86 551 638 79 [email protected]
RITRAMA COSTA RICA S.A. Slitting & Distribution CentreDe Waterland 300N-200E-100SBodega #3 - La Asunción de BelénHeredia - COSTA RICAPh. +506 22392311Fax +506 [email protected]
RITRAMA AUTOADESIVO INDUSTRIA LTDA. Slitting & Distribution CentreRod.Vice Pref.Hermenegildo Tonolli 1500Bairro Fazgran - Jundiaí - SPCEP 13213-086 BRAZILPh. +55 11 4525 1123Fax +55 11 4525 [email protected]
RITRAMA GUATEMALA, S.A. Slitting & Distribution CentreAv. El Ferrocarril 19-97 - zona 12 Centro Empresarial El Cortijo I - Ofibodega 711Ciudad de Guatemala - GUATEMALAPh/Fax: +502 24745367 +502 [email protected]
Production Centre
Slitting & Distribution Centre
PR
OM
OT
ION
AL
TD
01.
15
