Projector PX803UL-WH/PX803UL-BK · If you touch the cooling fluid with your hand, rinse your hands...
Transcript of Projector PX803UL-WH/PX803UL-BK · If you touch the cooling fluid with your hand, rinse your hands...
Projector
PX803UL-WH/PX803UL-BKUser’s Manual
Model No.NP-PX803UL-WH/NP-PX803UL-BK
Ver. 1 11/15
• Apple,Mac,MacOS,andMacBookaretrademarksofAppleInc.registeredintheU.S.andothercountries.
• Microsoft,Windows,WindowsVista, InternetExplorer, .NETFrameworkandPowerPointareeitheraregisteredtrademarkortrademarkofMicrosoftCorporationintheUnitedStatesand/orothercountries.
• MicroSaverisaregisteredtrademarkofKensingtonComputerProductsGroup,adivisionofACCOBrands.
• Adobe,AdobePDF,AdobeReader,andAcrobatareeitherregisteredtrademarksortrademarksofAdobeSystemsIncorporatedintheUnitedStatesand/orothercountries.
• VirtualRemoteToolusesWinI2C/DDClibrary,©NicomsoftLtd.
• HDMI,theHDMILogoandHigh-DefinitionMultimediaInterfacearetrademarksorregisteredtrademarksofHDMILicensingLLC.
• DisplayPortandDisplayPortComplianceLogoaretrademarksownedbytheVideoElectronicsStandardsAssocia-tion.
• HDBaseT™isatrademarkofHDBaseTAlliance.
• DLPandBrilliantColoraretrademarksofTexasInstruments.
• TrademarkPJLinkisatrademarkappliedfortrademarkrightsinJapan,theUnitedStatesofAmericaandothercountriesandareas.
• Wi-Fi®,Wi-FiAlliance®,andWi-FiProtectedAccess(WPA,WPA2)®areregisteredtrademarksoftheWi-FiAlliance.
• Blu-rayisatrademarkofBlu-rayDiscAssociation
• CRESTRONandROOMVIEWareregisteredtrademarksofCrestronElectronics,Inc.intheUnitedStatesandothercountries.
• EthernetiseitheraregisteredtrademarkortrademarkofFujiXeroxCo.,Ltd.
• ExtronandXTPareregisteredtrademarksofRGBSystems,Inc.intheUnitedStates.
• Otherproductandcompanynamesmentionedinthisuser’smanualmaybethetrademarksorregisteredtrademarksoftheirrespectiveholders.
• TOPPERSSoftwareLicenses
TheproductincludessoftwarelicensedunderTOPPERSLicense.
Formoreinformationoneachsoftware,see“readme.pdf”insidethe“aboutTOPPERS”folderonthesuppliedCD-ROM.
NOTES(1)Thecontentsofthisuser’smanualmaynotbereprintedinpartorwholewithoutpermission.
(2)Thecontentsofthisuser’smanualaresubjecttochangewithoutnotice.
(3)Greatcarehasbeentakeninthepreparationofthisuser’smanual;however,shouldyounoticeanyquestionablepoints,errorsoromissions,pleasecontactus.
(4)Notwithstandingarticle(3),NECwillnotberesponsibleforanyclaimsonlossofprofitorothermattersdeemedtoresultfromusingtheProjector.
i
Important InformationSafety CautionsPrecautionsPleasereadthismanualcarefullybeforeusingyourNECprojectorandkeepthemanualhandyforfuturereference.
CAUTIONToturnoffmainpower,besuretoremovetheplugfrompoweroutlet.Thepoweroutletsocketshouldbeinstalledasneartotheequipmentaspossible,andshouldbeeasilyaccessible.
CAUTIONTOPREVENTSHOCK,DONOTOPENTHECABINET.THEREAREHIGH-VOLTAGECOMPONENTSINSIDE.REFERSERVICINGTOQUALIFIEDSERVICEPERSONNEL.
Thissymbolwarnstheuserthatuninsulatedvoltagewithintheunitmaybesufficienttocauseelectricalshock.Therefore,itisdangeroustomakeanykindofcontactwithanypartinsideoftheunit.
Thissymbolalertstheuserthatimportantinformationconcerningtheoperationandmaintenanceofthisunithasbeenprovided.Theinformationshouldbereadcarefullytoavoidproblems.
WARNING:TOPREVENTFIREORSHOCK,DONOTEXPOSETHISUNITTORAINORMOISTURE.DONOTUSETHISUNIT’SPLUGWITHANEXTENSIONCORDORINANOUTLETUNLESSALLTHEPRONGSCANBEFULLYINSERTED.
DOC Compliance Notice (for Canada only)ThisClassAdigitalapparatuscomplieswithCanadianICES-003.
Machine Noise Information Regulation - 3. GPSGV,Thehighestsoundpressurelevelislessthan70dB(A)inaccordancewithENISO7779.
Disposing of your used product
EU-widelegislationasimplementedineachMemberStaterequiresthatusedelectricalandelectronicprod-uctscarryingthemark(left)mustbedisposedofseparatelyfromnormalhouseholdwaste.Thisincludesprojectorsandtheirelectricalaccessories.Whenyoudisposeofsuchproducts,pleasefollowtheguidanceofyourlocalauthorityand/orasktheshopwhereyoupurchasedtheproduct.Aftercollectingtheusedproducts,theyarereusedandrecycledinaproperway.Thiseffortwillhelpusreducethewastesaswellasthenegativeimpacttothehumanhealthandtheenvironmentattheminimumlevel.ThemarkontheelectricalandelectronicproductsonlyappliestothecurrentEuropeanUnionMemberStates.
For EU:Thecrossed-outwheeledbinimpliesthatusedbatteriesshouldnotbeputtothegeneralhouseholdwaste!Thereisaseparatecollectionsystemforusedbatteries,toallowpropertreatmentandrecyclinginaccordancewithlegislation.
According the EU directive 2006/66/EC, the battery can’t be disposed improperly. The battery shall be sepa-rated to collect by local service.
ii
Important Information
WARNING TO CALIFORNIA RESIDENTS:Handlingthecablessuppliedwiththisproductwillexposeyoutolead,achemicalknowntotheStateofCaliforniatocausebirthdefectsorotherreproductiveharm.WASHHANDSAFTERHANDLING.
RF Interference
WARNINGThisisaClassAproduct.Inadomesticenvironmentthisproductmaycauseradiointerferenceinwhichcasetheusermayberequiredtotakeadequatemeasures.CAUTION• Inordertoreduceanyinterferencewithradioandtelevisionreceptionuseasignalcablewithferritecoreattached.Useofsignalcableswithoutaferritecoreattachedmaycauseinterferencewithradioandtelevisionreception.• ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassAdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferencewhentheequipmentisoperatedinacommercialenvironment.Thisequipmentgenerates,uses,andcanradi-ateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstallationmanual,maycauseharmfulinterferencetoradiocommunications.Operationofthisequipmentinaresidentialareaislikelytocauseharmfulinterferenceinwhichcasetheuserwillberequiredtocorrecttheinterferenceathisownexpense.
ForUKonly:InUK,aBSapprovedpowercordwithmouldedplughasaBlack(fiveAmps)fuseinstalledforusewiththisequipment.Ifapowercordisnotsuppliedwiththisequipmentpleasecontactyoursupplier.
Important SafeguardsThesesafetyinstructionsaretoensurethelonglifeofyourprojectorandtopreventfireandshock.Pleasereadthemcarefullyandheedallwarnings.
WARNING• Whentheprojectorisdamaged,coolingfluidsmaycomeoutofinternalpart. Shouldthishappen,immediatelyturnofftheACsupplytotheprojectorandcontactyourdealer. DONOTtouchanddrinkthecoolingfluid.Whenthecoolingfluidsareswallowedorcontactedwithyoureyes,pleaseconsultmedicalattentionimmediately.Ifyoutouchthecoolingfluidwithyourhand,rinseyourhandswellunderrunningwater.
Installation• Donotplacetheprojectorinthefollowingconditions:- onanunstablecart,stand,ortable.- nearwater,baths,ordamprooms.- indirectsunlight,nearheaters,orheatradiatingappliances.- inadusty,smokyorsteamyenvironment.- onasheetofpaperorcloth,rugsorcarpets.• Donotinstallandstoretheprojectorinthebelowcircumstances.Failuretodosomaycauseofmalfunction.- Inpowerfulmagneticfields- Incorrosivegasenvironment- Outdoors• Ifyouwishtohavetheprojectorinstalledontheceiling:- Donotattempttoinstalltheprojectoryourself.- Theprojectormustbeinstalledbyqualifiedtechniciansinordertoensureproperoperationandreducetheriskofbodilyinjury.- Inaddition,theceilingmustbestrongenoughtosupporttheprojectorandtheinstallationmustbeinaccordancewithanylocalbuildingcodes.- Pleaseconsultyourdealerformoreinformation.
iii
Important Information
WARNING• Donotuseanyotherobjectthantheprojector’slenscovertocoverthelenswhiletheprojectorison.Doingsocancausetheobjecttogetextremelyhot,andpossiblyresultinginafireordamageduetotheheatemittedfromthelightoutput.
• Donotplaceanyobjects,whichareeasilyaffectedbyheat,infrontoftheprojectorlens.Doingsocouldleadtotheobjectmeltingfromtheheatthatisemittedfromthelightoutput.
Thisprojectorcanbeinstalledanyanglewithinverticalandhorizontal360°range,however,lifeofopticalpartswillbeshorteninthefollowinginstallationstate:• Whentheprojectorisinstalledonwhichlensfacesdownward.• Whentheintakeventontheprojectorsidefacesdownwardintheportraitinstallation.(→page154)Forportraitinstallation,installtheprojectorwiththeintakeventatthebottom.Observeprecautionsforportraitinstallation.* Acustomizedstandisrequiredtobeattachedtotheprojector.(→page155)
Fire and Shock Precautions • Ensurethatthereissufficientventilationandthatventsareunobstructedtopreventthebuild-upofheatinsideyourprojector.Allowenoughspacebetweenyourprojectorandawall.(→pagexi)• Donottrytotouchtheexhaustventontherearside(whenseenfromthefront)asitcanbecomeheatedwhiletheprojectoristurnedonandimmediatelyaftertheprojectoristurnedoff.PartsoftheprojectormaybecometemporarilyheatediftheprojectoristurnedoffwiththePOWERbuttonoriftheACpowersupplyisdisconnectedduringnormalprojectoroperation. Usecautionwhenpickinguptheprojector.• Preventforeignobjectssuchaspaperclipsandbitsofpaperfromfallingintoyourprojector.Donotattempttoretrieveanyobjectsthatmightfallintoyourprojector.Donotinsertanymetalobjectssuchasawireorscrewdriverintoyourprojector.Ifsomethingshouldfallintoyourprojector,disconnectitimmediatelyandhavetheobjectremovedbyaqualifiedservicepersonnel.• Donotplaceanyobjectsontopoftheprojector.• Donottouchthepowerplugduringathunderstorm.Doingsocancauseelectricalshockorfire.• Theprojectorisdesignedtooperateonapowersupplyof100-240VAC50/60Hz.Ensurethatyourpowersupplyfitsthisrequirementbeforeattemptingtouseyourprojector.• Donotlookintothelenswhiletheprojectorison.Seriousdamagetoyoureyescouldresult.• Donotlookintothelightsourceusingopticalinstruments(suchasmagnifyingglassesandmirrors).Visualimpair-mentcouldresult.• Whenturningontheprojector,ensurethatnobodyisfacingtowardsthelensinthepathofthelightemittedfromthelaser.
• Keepanyitems(magnifyingglassetc.)outofthelightpathoftheprojector.Thelightpathbeingprojectedfromthelensisextensive,thereforeanykindofabnormalobjectsthatcanredirectlightcomingoutofthelens,cancauseanunpredictableoutcomesuchasafireorinjurytotheeyes.• Donotplaceanyobjects,whichareeasilyaffectedbyheat,infrontofaprojectorexhaustvent. Doingsocouldleadtotheobjectmeltingorgettingyourhandsburnedfromtheheatthatisemittedfromtheexhaustvent.
iv
Important Information
• Handlethepowercordcarefully.Adamagedorfrayedpowercordcancauseelectricshockorfire.- Donotuseanypowercordotherthantheonesuppliedwiththeprojector.- Donotbendortugthepowercordexcessively.- Donotplacethepowercordundertheprojector,oranyheavyobject.- Donotcoverthepowercordwithothersoftmaterialssuchasrugs.- Donotheatthepowercord.- Donothandlethepowerplugwithwethands.• Turnofftheprojector,unplugthepowercordandhavetheprojectorservicedbyaqualifiedservicepersonnelunderthefollowingconditions:- Whenthepowercordorplugisdamagedorfrayed.- Ifliquidhasbeenspilledintotheprojector,orifithasbeenexposedtorainorwater.- Iftheprojectordoesnotoperatenormallywhenyoufollowtheinstructionsdescribedinthisuser’smanual.- Iftheprojectorhasbeendroppedorthecabinethasbeendamaged.- Iftheprojectorexhibitsadistinctchangeinperformance,indicatinganeedforservice.• Disconnectthepowercordandanyothercablesbeforecarryingtheprojector.• Turnofftheprojectorandunplugthepowercordbeforecleaningthecabinet.• Turnofftheprojectorandunplugthepowercordiftheprojectorisnottobeusedforanextendedperiodoftime.• WhenusingaLANcable: Forsafety,donotconnecttotheterminalforperipheraldevicewiringthatmighthaveexcessivevoltage.•Donotusethemalfunctionedprojector.Itmaycauseofnotonlyelectricshockorfirebutalsoseriousdamagetoyoureyesight.• Donotletchildrentooperatetheprojectorbythemselves.Iftheprojectorisoperatedbychildren,adultsneedtoattendandkeeptheireyesonchildren.• Ifdamageormalfunctionoftheprojectorisfound,immediatelystoptouseitandconsultyourdealerforrepair.• Neverdisassemble,repair,andremodelbyendusers.Iftheseareperformedbyendusers,itmaycauseofseriousproblemonusers’safety.• Consultyourdealerfordisposingtheprojector.Neverdisassembletheprojectorbeforedisposingit.
CAUTION• Keephandsawayfromthelensmountingportionwhileperformingalensshift.Failuretodosocouldresultinfingersbeingpinchedbythemovinglens.• Donotusethetilt-footforpurposesotherthanoriginallyintended.Misusessuchasgrippingthetilt-footorhang-ingonthewallcancausedamagetotheprojector.• Donotsendtheprojectorinthesoftcasebyparceldeliveryserviceorcargoshipment.Theprojectorinsidethesoftcasecouldbedamaged.• Select[HIGH]inFanmodeifyoucontinuetousetheprojectorforconsecutivedays.(Fromthemenu,select[SETUP]→[OPTIONS(1)]→[FANMODE]→[MODE]→[HIGH].)• Donotunplugthepowercordfromthewalloutletorprojectorwhentheprojectorispoweredon.DoingsocancausedamagetotheACINterminaloftheprojectorand(or)theprongplugofthepowercord. ToturnofftheACpowersupplywhentheprojectorispoweredon,usetheprojector’smainpowerswitch,apowerstripequippedwithaswitch,orabreaker.• Whenmovingtheprojector,makesureyouhaveatleasttwopeople.Attemptingtomovetheprojectoralonecouldresultinbackpainorotherinjuries.
Caution on Handling the Optional LensWhenshippingtheprojectorwiththelens,removethelensbeforeshippingtheprojector.Alwaysattachthedustcaptothelenswheneveritisnotmountedontheprojector.Thelensandthelensshiftmechanismmayencounterdamagecausedbyimproperhandlingduringtransportation.Donotholdthelenspartwhencarryingtheprojector.Doingsocouldcausethefocusringtorotate,resultinginaccidentaldroppingoftheprojector.Formounting,replacing,andcleaningthelens,makesuretopowerofftheprojectoranddisconnectthepowercord.Failuretodosocanresultineyeinjury,electricshock,orburninjuries.
v
Important Information
Precautions when installing or replacing the lens unit sold separately (LENS CALIBRATION) Afterinstallingorreplacingthelensunit,presseithertheSHUTTER/CALIBRATIONbuttononthemainunitortheINFO/L-CALIB.buttonwhilepressingtheCTLbuttonontheremotecontroltocarryout[LENSCALIBRATION].(→ page18,118)Bycarryingout[LENSCALIBRATION],theadjustmentrangeofthezoom,focus,andshiftofthe[LENSMEMORY]iscalibrated.Contactyourdealertoinstallandreplacethelensunit.
Remote Control Precautions• Handletheremotecontrolcarefully.• Iftheremotecontrolgetswet,wipeitdryimmediately.• Avoidexcessiveheatandhumidity.• Donotshort,heat,ortakeapartbatteries.• Donotthrowbatteriesintofire.• Ifyouwillnotbeusingtheremotecontrolforalongtime,removethebatteries.• Ensurethatyouhavethebatteries’polarity(+/−)alignedcorrectly.• Donotusenewandoldbatteriestogether,orusedifferenttypesofbatteriestogether.• Disposeofusedbatteriesaccordingtoyourlocalregulations.
Light Module1. Alightmodulecontainingmultiplelaserdiodesisequippedintheproductasthelightsource.2. Theselaserdiodesaresealedinthelightmodule.Nomaintenanceorserviceisrequiredfortheperformanceofthelightmodule.
3. Enduserisnotallowedtoreplacethelightmodule.4. Contactqualifieddistributorforlightmodulereplacementandfurtherinformation.
Laser Safety Caution• ThisproductisclassifiedasClass1ofIEC60825-1Thirdedition2014-05. ThisproductisclassifiedasClass3RofIEC60825-1Secondedition2007-03. AlsocomplieswithFDAperformancestandards21CFR1040.10and1040.11forlaserproductsexceptfordevia-tionspursuanttoLaserNoticeNo.50,datedJune24,2007. Obeythelawsandregulationsofyourcountryinrelationtotheinstallationandmanagementofthedevice.• Bluelaserdiodes:Wavelength450–460nm.• Pulsewidth&repetitionrate:0.74ms,240Hz• Outputpower:240W• Thelasermoduleisequippedinthisproduct. Useofcontrolsoradjustmentsofproceduresotherthanthosespecifiedhereinmayresultinhazardousradiationexposure.
CAUTION
• Useofcontrolsoradjustmentsorperformanceofproceduresotherthanthosespecifiedhereinmayresultinhazardousradiationexposure.
CAUTION – CLASS 3R LASER PRODUCTLASERLIGHT–AVOIDDIRECTEYEEXPOSURE
vi
Important Information
Applicablelensunit:NP16FL/NP17ZL/NP18ZL/NP19ZL/NP20ZL/NP21ZL/NP31ZL
HorizontalangleH
Lens ZoomTele Wide
NP16FL — 32.9NP17ZL 15.5 21.7NP18ZL 12.4 16.1NP19ZL 7.7 12.7NP20ZL 5.3 7.9NP21ZL 3.4 5.4NP31ZL 27.8 33.6
VerticalangleV
Lens ZoomTele Wide
NP16FL — 22.0NP17ZL 9.8 14.0NP18ZL 7.8 10.2NP19ZL 4.8 8.0NP20ZL 3.3 5.0NP21ZL 2.1 3.4NP31ZL 18.2 22.5
H
H
V
V
Applicablelensunit:NP39ML
HorizontalangleH
Lens ZoomTele Wide
NP39ML — 52.8
VerticalangleV
Lens ZoomTele Wide
V1 V2NP39ML — 9.68 21.52
H
H
V1
V2
vii
Important Information
• ThecautionlabelandtheexplanatorylabelsoftheCLASS3RLASERPRODUCTSarestuckonthebelowindicatedpositions.
Label1
Label2 Label3
Label 3
Label 1
Label 2
viii
Important Information
• Manufacturer'sIDLabel
(ForPX803UL-WH)
(ForPX803UL-BK)
PositionoftheManufacturer'sIDLabel
ix
Important Information
About Copyright of original projected pictures:Pleasenotethatusingthisprojectorforthepurposeofcommercialgainortheattractionofpublicattentioninavenuesuchasacoffeeshoporhotelandemployingcompressionorexpansionofthescreenimagewiththefollowingfunc-tionsmayraiseconcernabouttheinfringementofcopyrightswhichareprotectedbycopyrightlaw.[ASPECTRATIO],[KEYSTONE],Magnifyingfeatureandothersimilarfeatures.
Turkish RoHS information relevant for Turkish marketEEE Yönetmeliğine Uygundur.
Thisdeviceisnotintendedforuseinthedirectfieldofviewatvisualdisplayworkplaces.Toavoidincommodingreflec-tionsatvisualdisplayworkplacesthisdevicemustnotbeplacedinthedirectfieldofview.
x
Important Information
Health precautions to users viewing 3D images
Beforeviewing,besuretoreadhealthcareprecautionsthatmaybefoundintheuser’smanualincludedwithyour3Deyeglassesoryour3DcompatiblecontentsuchasBlu-rayDiscs,videogames,computer’svideofilesandthelike.Toavoidanyadversesymptoms,heedthefollowing:• Donotuse3Deyeglassesforviewinganymaterialotherthan3Dimages.• Allowadistanceof2m/7feetorgreaterbetweenthescreenandauser.Viewing3Dimagesfromtoocloseadistancecanstrainyoureyes.• Avoidviewing3Dimagesforaprolongedperiodoftime.Takeabreakof15minutesorlongeraftereveryhourofviewing.• Ifyouoranymemberofyourfamilyhasahistoryoflight-sensitiveseizures,consultadoctorbeforeviewing3Dimages.• Whileviewing3Dimages,ifyougetsicksuchasnausea,dizziness,queasiness,headache,eyestrain,blurryvision,convulsions,andnumbness,stopviewingthem.Ifsymptomsstillpersist,consultadoctor.• View3Dimagesfromthefrontofthescreen.Viewingfromananglemaycausefatigueoreyestrain.
Power management functionInordertokeeppowerconsumptionlow,thefollowingpowermanagementfunctions(1)and(2)havebeensetwhenshippedfromthefactory.Pleasedisplaytheon-screenmenuandchangethesettings(1)and(2)accordingtotheaimofusingtheprojector.
1. STANDBY MODE (Factory preset: NORMAL)
• When[NORMAL]isselectedfor[STANDBYMODE],thefollowingterminalsandfunctionswillnotwork:
HDMIOUTterminal,Ethernet/HDBaseTPort,USBPort,LANfunctions,MailAlertfunction
(→page134)
2. AUTO POWER OFF (Factory preset: 1 hour)
• When[1:00]isselectedfor[AUTOPOWEROFF],youcanenabletheprojectortoautomaticallyturnoffin1hourifthereisnosignalreceivedbyanyinputorifnooperationisperformed.
(→page135)
xi
Important Information
Clearance for Installing the ProjectorAllowampleclearancebetweentheprojectoranditssurroundingsasshownbelow.Thehightemperatureexhaustcomingoutofthedevicemaybesuckedintothedeviceagain.AvoidinstallingtheprojectorinaplacewhereairmovementfromtheHVACisdirectedattheprojector.HeatedairfromtheHVACcanbetakeninbytheprojector’sintakevent.Ifthishappens,thetemperatureinsidetheprojectorwillrisetoohighcausingtheover-temperatureprotectortoautomaticallyturnofftheprojectorspower.• Concerningtotheportraitprojection,pleaserefer“Portraitprojection”onpage154.
Example 1 – If there are walls on both sides of the projector.
30cm/11.8"orgreater 30cm/11.8"orgreater
Intakevent
NOTE:The drawing shows the proper clearance required for the front, back and top of the projector.
Example 2 – If there is a wall behind the projector.
50cm/19.7"orgreater
Lens
Exhaustvent
NOTE:The drawing shows the proper clearance required for the right, left, and top of the projector.
xii
Table of ContentsImportant Information ............................................................................................ i
1. Introduction ...........................................................................................................1❶What’sintheBox? ..........................................................................................................1❷IntroductiontotheProjector ...........................................................................................3
CongratulationsonYourPurchaseoftheProjector ..................................................3General .....................................................................................................................3Lightsource·Brightness ..........................................................................................3Installation .................................................................................................................3Videos .......................................................................................................................4Network .....................................................................................................................4Energy-saving ...........................................................................................................4Aboutthisuser’smanual ...........................................................................................5
❸PartNamesoftheProjector ...........................................................................................6Front/Top ...................................................................................................................6Rear ..........................................................................................................................7Controls/IndicatorPanel ............................................................................................8TerminalsFeatures ...................................................................................................9
❹PartNamesoftheRemoteControl ..............................................................................10BatteryInstallation ..................................................................................................11RemoteControlPrecautions ...................................................................................11OperatingRangeforWirelessRemoteControl .......................................................12UsingtheRemoteControlinWiredOperation ........................................................12
2. Projecting an Image (Basic Operation) ...............................................13❶FlowofProjectinganImage .........................................................................................13❷ConnectingYourComputer/ConnectingthePowerCord ..............................................14
UsingtheSuppliedPowerCords ............................................................................15UsingthePowerCordStopper ...............................................................................16
❸TurningontheProjector ...............................................................................................17PerformingLensCalibration ...................................................................................18NoteonStartupscreen(MenuLanguageSelectscreen) .......................................19
❹SelectingaSource .......................................................................................................20Selectingthecomputerorvideosource..................................................................20
❺AdjustingthePictureSizeandPosition ........................................................................22Adjustingtheverticalpositionofaprojectedimage(Lensshift) .............................23Focus ......................................................................................................................26Zoom .......................................................................................................................31AdjustingtheTiltFoot .............................................................................................32
❻OptimizingComputerSignalAutomatically ..................................................................33AdjustingtheImageUsingAutoAdjust ...................................................................33
❼TurningofftheProjector ...............................................................................................34❽AfterUse.......................................................................................................................35
3. Convenient Features ......................................................................................36❶Turnoffthelightoftheprojector(LENSSHUTTER) ....................................................36❷TurningofftheImage ....................................................................................................36❸TurningOfftheOn-ScreenMenu(On-ScreenMute) ....................................................36
xiii
Table of Contents
❹FreezingaPicture ........................................................................................................37❺MagnifyingaPicture .....................................................................................................38❻ChangingLIGHTMODE/CheckingEnergy-SavingEffectUsingLIGHTMODE
[LIGHTMODE]........................................................................................................39CheckingEnergy-SavingEffect[CARBONMETER] ..............................................41
❼CorrectingHorizontalandVerticalKeystoneDistortion[CORNERSTONE] .................42❽PreventingtheUnauthorizedUseoftheProjector[SECURITY] ..................................45❾Projecting3Dvideos.....................................................................................................48
Proceduretowatch3Dvideosusingthisprojector .................................................48Whenvideoscannotbeviewedin3D .....................................................................51
❿ControllingtheProjectorbyUsinganHTTPBrowser ..................................................52⓫StoringChangesforLensShift,Zoom,andFocus[LENSMEMORY] .........................58
Tostoreyouradjustedvaluesin[REF.LENSMEMORY]: .......................................59Tocallupyouradjustedvaluesfrom[REF.LENSMEMORY]: ................................61
4. Multi-Screen Projection ...............................................................................64❶Thingsthatcanbedoneusingmulti-screenprojection ................................................64
Case1.Usingasingleprojectortoprojecttwotypesofvideos[PIP/PICTUREBYPICTURE] .........................................................................................................64Case2.Usingfourprojectors(resolution:WUXGA)toprojectvideoswitharesolutionof2560×1600pixels[TILING]...............................................................65Thingstonotewheninstallingprojectors ................................................................67
❷DisplayingTwoPicturesattheSameTime ...................................................................68Projectingtwoscreens ............................................................................................69Switchingthemaindisplaywiththesub-displayandviceversa .............................70Restrictions .............................................................................................................71
❸DisplayingaPictureUsing[EDGEBLENDING] ...........................................................72Settingtheoverlapofprojectionscreens ................................................................73BlackLevelAdjustment ...........................................................................................76
5. Using On-Screen Menu .................................................................................78❶UsingtheMenus ...........................................................................................................78❷MenuElements .............................................................................................................79❸ListofMenuItems ........................................................................................................80❹MenuDescriptions&Functions[INPUT] ......................................................................86
HDMI .......................................................................................................................86DisplayPort ..............................................................................................................86BNC ........................................................................................................................86BNC(CV) .................................................................................................................86BNC(Y/C) ................................................................................................................86COMPUTER ...........................................................................................................86HDBaseT ................................................................................................................86SLOT .......................................................................................................................86ENTRYLIST ...........................................................................................................86TESTPATTERN ......................................................................................................86
❺MenuDescriptions&Functions[ADJUST] ...................................................................90[PICTURE] ..............................................................................................................90[IMAGEOPTIONS] .................................................................................................94[VIDEO] ...................................................................................................................98
xiv
Table of Contents
[3DSETTINGS] ....................................................................................................100UsingtheLensMemoryFunction[LENSMEMORY] ............................................101
❻MenuDescriptions&Functions[DISPLAY] ................................................................103[PIP/PICTUREBYPICTURE] ...............................................................................103[GEOMETRICCORRECTION] .............................................................................105[EDGEBLENDING] ..............................................................................................109[MULTISCREEN]..................................................................................................110
❼MenuDescriptions&Functions[SETUP] ...................................................................112[MENU] .................................................................................................................112[INSTALLATION(1)] ...............................................................................................114[INSTALLATION(2)] ...............................................................................................117[CONTROL] ..........................................................................................................119[NETWORKSETTINGS] .......................................................................................127[SOURCEOPTIONS] ...........................................................................................132[POWEROPTIONS] .............................................................................................134ReturningtoFactoryDefault[RESET] ..................................................................136
❽MenuDescriptions&Functions[INFO.] .....................................................................137[USAGETIME] ......................................................................................................137[SOURCE(1)] ........................................................................................................137[SOURCE(2)] ........................................................................................................138[SOURCE(3)] ........................................................................................................138[SOURCE(4)] ........................................................................................................138[WIREDLAN] ........................................................................................................139[VERSION(1)] .......................................................................................................139[OTHERS] .............................................................................................................139[HDBaseT] ............................................................................................................140
6. Connecting to Other Equipment ...........................................................141❶Mountingalens(soldseparately) ...............................................................................141
Mountingthelens..................................................................................................141Removingthelens ................................................................................................142
❷MakingConnections ...................................................................................................143AnalogRGBsignalconnection .............................................................................143DigitalRGBsignalconnection ..............................................................................144ConnectinganExternalMonitor ...........................................................................147ConnectingYourBlu-rayPlayerorOtherAVEquipment .......................................148ConnectingComponentInput ...............................................................................149ConnectingHDMIInput.........................................................................................150Connectingadocumentcamera ...........................................................................151ConnectingtoaWiredLAN ..................................................................................152ConnectingtoaHDBaseTtransmissiondevice(soldcommercially) ....................153Portraitprojection(verticalorientation) .................................................................154Stackingprojectors ...............................................................................................156
7. Maintenance .....................................................................................................159❶CleaningtheLens.......................................................................................................159❷CleaningtheCabinet ..................................................................................................159
8. User Supportware ..........................................................................................160❶OperatingEnvironmentforSoftwareIncludedonCD-ROM .......................................160
xv
Table of Contents
NamesandFeaturesofBundledSoftwarePrograms ...........................................160Downloadservice .................................................................................................160
❷InstallingSoftwareProgram .......................................................................................161InstallationforWindowssoftware ..........................................................................161
❸OperatingtheProjectorViatheLAN(VirtualRemoteTool) ........................................164ConnecttheprojectortoaLAN. ............................................................................165
❹ControllingtheProjectoroveraLAN(PCControlUtilityPro4/Pro5) ........................167
9. Appendix ..............................................................................................................171❶Throwdistanceandscreensize .................................................................................171
Lenstypesandthrowdistance .............................................................................171Tablesofscreensizesanddimensions ................................................................173Lensshiftingrange ................................................................................................174
❷MountingtheOptionalBoard(soldseparately) ..........................................................175❸CompatibleInputSignalList .......................................................................................177❹Specifications .............................................................................................................180
PowerCord ...........................................................................................................183❺CabinetDimensions ...................................................................................................184❻Pinassignmentsandsignalnamesofmainterminals ...............................................185❼Troubleshooting ..........................................................................................................187
IndicatorMessages ...............................................................................................187CommonProblems&Solutions ............................................................................189Ifthereisnopicture,orthepictureisnotdisplayedcorrectly. ...............................191
❽PCControlCodesandCableConnection ..................................................................192❾TroubleshootingCheckList .........................................................................................193
1
1. Introduction❶ What’s in the Box?Makesureyourboxcontainseverythinglisted.Ifanypiecesaremissing,contactyourdealer.Pleasesavetheoriginalboxandpackingmaterialsifyoueverneedtoshipyourprojector.
Projector
Dustcapforlens* Theprojectorisshippedwithout
alens.Forthetypesoflensandthrowdistances,seepage171.
Remotecontrol(7N901041)
AAalkalinebatteries(x2)
Lenstheftpreventionscrew(79TM1071)Thisscrewmakesitdif-ficulttoremovethelensmountedontheprojec-tor.(→page142)
Powercord×3
(79TM1021) (79TQ1001forAC120V) (79TQ1011forAC200V)
ForEurope/Asia/SouthAmerica ForNorthAmerica
4Stackingholders(79TM1101)Whenstackingprojectors(doublestacking),thetiltfootoftheupperprojectorwillbeplacedontothesestackingholders.(→ page157)
For North America onlyLimitedwarrantyFor customers in Europe: YouwillfindourcurrentvalidGuar-anteePolicyonourWebSite:www.nec-display-solutions.com• ImportantInfomation
(7N8N6631)• QuickSetupGuide(7N8N6641)• SecuritySticker (Usethisstickerwhensecurity
passwordisseton.)
NECProjectorCD-ROMUser’smanual(PDF)andtheutilitysoftware(7N952341)
2
1. Introduction
Attaching/Removing the Dust CapTo remove the dust cap from the projector, push thetongueatthetopleftoutwardandpulltheknobatthecenterofthecap.
Toattachthedustcaptotheprojector,locatethecatchonthelowerendofthedustcapandplaceitintotheopen-ingoftheprojectorwiththepointofatrianglemark(▽)facingdownward(①inthefigurebelow),andthenpushtheupperendof thedustcapagainst theprojector toplacethecatchesintotheslotwhileclutchingthehandle(②inthefigurebelow).
3
1. Introduction
❷ Introduction to the ProjectorThissectionintroducesyoutoyournewprojectoranddescribesthefeaturesandcontrols.
Congratulations on Your Purchase of the ProjectorThisprojectorisoneoftheverybestprojectorsavailabletoday.Theprojectorenablesyoutoprojectpreciseimagesupto500inchesacross(measureddiagonally)fromyourPCorMaccomputer(desktopornotebook),VCR,Blu-rayplayer,ordocumentcamera.Youcanusetheprojectoronatabletoporcart,youcanusetheprojectortoprojectimagesfrombehindthescreen,andtheprojectorcanbepermanentlymountedonaceiling*1.Theremotecontrolcanbeusedwirelessly.
*1 Donotattempttomounttheprojectoronaceilingyourself.
Theprojectormustbeinstalledbyqualifiedtechniciansinordertoensureproperoperationandreducetheriskofbodilyinjury.
Inaddition,theceilingmustbestrongenoughtosupporttheprojectorandtheinstallationmustbeinaccordancewithanylocalbuildingcodes.Pleaseconsultyourdealerformoreinformation.
General
• Single-chipDLPprojectorwithhighresolutionandhighbrightness
Realizedtoprojecttheimageintheresolution1920×1200pixels(WUXGA),theaspectratioin16:10,andthebrightnessin8000lumens.
Light source · Brightness
• Along-lifelaserdiodeisequippedinthelightmodule
Theproductcanbeoperatedatlowcostbecausethelaserlightsourcecanbeusedforalongtimewithoutrequir-ingreplacementormaintenance.
• Brightnesscanbeadjustedwithinawiderange
Unlikewithordinarylightsources,thebrightnesscanbeadjustedfrom20to100%in1%increments.
• [CONSTANTBRIGHTNESS]mode
Brightnessnormallydecreaseswithuse,butbyselecting[CONSTANTBRIGHTNESS]mode,sensorsinsidetheprojectordetectandautomaticallyadjusttheoutput,therebymaintainingconstantbrightnessthroughoutthelifeofthelightmodule.
However,ifbrightnessoutputissetatthemaximum,brightnesswilldecreasewithuse.
Installation
• Widerangeofoptionallensesselectableaccordingtotheplaceofinstallation
Thisprojectorsupports8typesofoptionallenses,providingaselectionoflensesadaptedtoavarietyofplacesofinstallationandprojectionmethods.
Inaddition,thelensescanbemountedandremovedinonetouch.
Notethatnolensismounteduponshipmentfromthefactory.Pleasepurchaseoptionallensesseparately.
• Thisprojectorcanbeinstalledanyanglewithinverticalandhorizontal360°range,however,lifeofopticalparts will be shorten in the following installation state:
• Whentheprojectorisinstalledonwhichlensfacesdownward.
• Whentheintakeventontheprojectorsidefacesdownwardintheportraitinstallation.(Seepage154)
• Doublestackableforhighlightoutputprojection
Bystacking2projectors,increasedbrightnessonalargescreenispossible.
• Powerlenscontrolforquickandeasyadjustment
Byusingbuttonsontheprojectorortheremotecontrol,zoom,focus,andposition(lensshift)canbeadjusted.
4
1. Introduction
Videos
• Widerangeofinput/outputterminals(HDMI,DisplayPort,BNC,HDBaseT,etc.)andbuilt-inmonauralspeaker
Theprojector isequippedwithavarietyof input/outputterminals:HDMI,DisplayPort,BNC(5-core),computer(analog),HDBaseT,etc.
Theprojector’sHDMIinput/outputterminalsandDisplayPortinputterminalsupportHDCP.
HDBaseT,promotedandadvancedbytheHDBaseTAlliance,isaconsumerelectronic(CE)andcommercialcon-nectivitytechnology.
• Slotforoptionalboard
Thisprojectorhasaslotforoptionalboards(soldseparately).
• Simultaneousdisplayof2images(PIP/PICTUREBYPICTURE)
Twoimagescanbeprojectedsimultaneouslywithasingleprojector.
Therearetwotypesoflayoutsforthetwoimages:“picture-in-picture”(PIP)inwhichasub-pictureisdisplayedonthemainpicture,and“picture-by-picture”(PICTUREBYPICTURE)inwhichthemainandsubpicturesaredisplayednexttoeachother.
• Multi-screenprojectionusingmultipleprojectors
ThisprojectorisequippedwithmultipleHDMIinput&outputterminalsthatcanconnectmultipleprojectorsinadaisychain.Bydividingandprojectinghighresolutionimageoneachprojector,highqualityimagecanberealized.
Furthermore,theboundariesofthescreensaresmoothedusinganedgeblendingfunction.
• SupportsHDMI3Dformat
Thisprojectorcanbeusedtowatchvideosin3Dusingcommercially-availableactiveshutter-type3Deyewearand3DemittersthatsupportXpand3D.
Network
• Convenientutilitysoftware(UserSupportware)providedasstandard
ThethreeutilitysoftwarestoredintheenclosedNECProjectorCD-ROM(VirtualRemoteTool,PCControlUtilityPro4(forWindows)andPCControlUtilityPro5(forMacOS))canbeused.
• CRESTRONROOMVIEWcompatible
ThisprojectorsupportsCRESTRONROOMVIEW,allowingmultipledevicesconnectedtothenetworktobeman-agedfromacomputerorcontroller.
Energy-saving
• Energy-savingdesignwithastandbypowerconsumptionof0.27wattsorunder
Whentheon-screenmenu’sstandbymodeissetto“NORMAL”,thepowerconsumptioninthestandbymodeis0.27wattsorunder.
0.18wattswithpowervoltageAC100V-130Vand0.27wattswithpowervoltageAC200V-240V.
• “LIGHTMODE”forlowpowerconsumptionand“CarbonMeter”display
Theprojectorisequippedwithan“LIGHTMODE”forreducingpowerconsumptionduringuse.Furthermore,thepower-savingeffectwhentheLIGHTMODEissetisconvertedintotheamountofreductionsofCO2emissionsandthisisindicatedontheconfirmationmessagedisplayedwhenthepoweristurnedoffandat“Information”ontheon-screenmenu(CARBONMETER).
5
1. Introduction
About this user’s manualThefastestwaytogetstartedistotakeyourtimeanddoeverythingrightthefirsttime.Takeafewminutesnowtoreviewtheuser’smanual.Thismaysaveyoutimelateron.Atthebeginningofeachsectionofthemanualyou’llfindanoverview.Ifthesectiondoesn’tapply,youcanskipit.
6
1. Introduction
❸ Part Names of the ProjectorFront/TopThelensissoldseparately.ThedescriptionbelowisforwhentheNP18ZLlensismounted.
Lens
RemoteSensor(locatedonthefrontandtherear)
(→page12)
IndicatorPanel(→page8)
IntakeventTakesinairtocooltheunit.
(→pagexi,154)
RemoteSensor(→page12)
StackingHolderfixingsection(4locations)
IntakeventTakesinairtocooltheunit.(→pagexi,154)
TiltFoot(→page32)
LensRelease(LENS)Button(→page142)
LensCap(Thelenscapisattached
tothelens.)
7
1. Introduction
Rear
ACINterminalConnectthesuppliedpowercord’sthree-pinplughere,andplugtheotherendintoanactivewalloutlet.(→page14)
Theftpreventionscrewholeforthelensunit
MainpowerswitchWhileACpowerisbeingsupplied,setthemainpowerswitchtoONposition(|),thenyourprojectorwillenterastandbystate.
PowerCordStopper(→page16)
* ThissecurityslotsupportstheMicroSaver®SecuritySystem.
Built-inSecuritySlot( )*
SecurityBarFixingatheftprevention
device.Thesecuritybaracceptssecuritywiresorchains
upto0.18inch/4.6mmindiameter.
Handle(locatedon4posi-tions)
Fortransportation
NOTE: • For moving the projector,
makesureyouhaveatleasttwopeople.Attemptingtomove the projector alonecould result in back pain or other injuries.
IntakeventTakesinairtocooltheunit.(→pagexi,154)
Terminals(→page9)
ExhaustventHeatedaiirisexhausted
fromhere.(→pagexi,154)
Controls(→page8)
8
1. Introduction
Controls/Indicator Panel
10 11
5 4 3 2 161513 8
7
141716 9 12
1. (POWER)Button (→page17,34)
2. POWER Indicator (→page17,18,34,186)
3. STATUS Indicator (→page186)
4. LIGHT Indicator (→page39,187)
5. TEMP.Indicator (→page187)
6. SOURCEButton (→page20)
7. AUTOADJ.Button (→page33)
8. 3DREFORMButton (→page42)
9. MENUButton (→page78)
10. ▲▼◀▶Buttons (→page78)
11.ENTERButton (→page78)
12.EXITButton (→page78)
13.SHUTTER/CALIBRATIONButton (→page36)
14.LIGHTButton (→page39)
15.LENSSHIFT/HOMEPOSITIONButton (→page23,58,174)
16.FOCUS+/−Button (→page26)
17.ZOOM+/−Button (→page31)
9
1. Introduction
Terminals Features
9
101112
1 7
4
56
238
1314
1. COMPUTERIN(MiniD-Sub15Pin) (→page14,143,149,184)
2. DisplayPortINTerminal(DisplayPort20Pin) (→page144,184)
3. HDMIINTerminal(TypeA) (→page144,146,150,184)
4. BNCInput[R/Cr/CV,G/Y/Y,B/Cb/C,H,V]Termi-nals(BNC×5)
(→page143,148)
5. BNC(Y/C)InputTerminal(BNC×2) (→page148)
6. BNC(CV)InputTerminal(BNC×1) (→page148)
7. USBPort(TypeA) (→page185) (Forfutureexpansion.Thisportallowsforpowersup-ply.)
8. HDMIOUTTerminal(TypeA) (→page147)
9. Ethernet/HDBaseTPort(RJ-45) (→page152,153,185)
10.3DSYNCTerminal(MiniDIN3Pin) (→page50)
11.PCCONTROLPort(D-Sub9Pin) (→page185,191) Use this port to connect aPC or control system.Thisenablesyoutocontroltheprojectorusingserialcommunicationprotocol.Ifyouarewritingyourownprogram,typicalPCcontrolcodesareonpage191.
12.REMOTETerminal(StereoMini) Usethisjackforwiredremotecontroloftheprojectorusingacommerciallyavailableremotecablewith⌀3.5 stereomini-plug(withoutresistance).
Connecttheprojectorandthesuppliedremotecontrolusingacommerciallyavailablewiredremotecontrolcable.
(→page12)
NOTE: • Whenaremotecontrolcable isconnectedtotheREMOTE
terminal,infraredremotecontroloperationscannotbeper-formed.
• PowercannotbesuppliedfromtheREMOTEterminaltotheremotecontrol.
• When [HDBaseT] is selected in the [REMOTE SENSOR]and theprojector isconnected toacommercially-availabletransmissiondevicethatsupportsHDBaseT,remotecontroloperationsininfra-redcannotbecarriedoutiftransmissionofremotecontrolsignalshasbeensetupinthetransmissiondevice.However,remotecontrolusinginfraredrayscanbecarriedoutwhenthepowersupplyofthetransmissiondeviceis switched off.
13. SLOT (→page175)
14. Service terminal Forserviceonly
10
1. Introduction
❹ Part Names of the Remote Control
1. Infrared Transmitter (→page12)
2. RemoteJack Connectacommerciallyavailableremotecablehereforwiredopera-tion.(→page12)
3. POWERONButton (→page17)
4. POWEROFFButton (→page34)
5. INFO/L-CALIB.Button Displaythe[SOURCE(1)]screenoftheon-screenmenu.
(→page18,137)
6. VOL./FOCUS+/−Buttons (→page26)
7. D-ZOOM/ZOOM+/−Buttons (→page38)
8. TESTButton (→page86)
9. ECO/L-SHIFTButton (→page25,39)
10.MENUButton (→page78)
11.EXITButton (→page78)
12.ENTERButton (→page78)
13. ▲▼◀▶Button (→page78)
14.ON-SCREENButton (→page36)
15.SHUTTERButton (→page36)
16.AV-MUTEButton (→page36)
17.PICTUREButton (→page90)
18.SOURCEButton (→page20)
19.3DREFORMButton (→page42)
20.PIP/FREEZEButton (→page37,69)
1
3
4
6
14
10
12
16
20
7
2
5
8
9
11
15
1817
13
2119
252832
2322
35
24
30
26
29
34
27
3136
33
21.AUTOADJ.Button (→page33)
22,23.COMPUTER1/2Button (→page20)
24.COMPUTER3Button (This button is notwork on thisprojector.)
25.VIDEOButton (→page20)
26.S-VIDEOButton (→page20)
27.HDMIButton (→page20)
28.DisplayPortButton (→page20)
29.VIEWERButton (TheVIEWERbuttonwillnotworkonthisseriesofprojectors.)
30.NETWORKButton (→page20)
31.SLOTButton (→page175)
32.IDSETButton (→page125)
33.Numeric(0to9/CLEAR)But-tons
(→page125) (TheAUXbuttonwillnotworkonthisseriesofprojectors.)
34.CTLButton Thisbuttonisusedinconjunctionwith other buttons, similar to aCTRLkeyonacomputer.
35.LIGHTButton Thisbuttonisusedtoturnonthebacklight for the remote controlbuttons.
The backlight will turn off if nobutton operation ismade for 10seconds.
36.HELPButton (→page137)
11
1. Introduction
Battery Installation1. Press the catch and remove
the battery cover.2. Install new ones (AA). En-
sure that you have the bat-teries’ polarity (+/−) aligned correctly.
3. Slip the cover back over the batteries until it snaps into place.
NOTE:Donotmixdifferenttypesofbatteriesornewand old batteries.
1
2 1 2
Remote Control Precautions
• Handletheremotecontrolcarefully.
• Iftheremotecontrolgetswet,wipeitdryimmediately.
• Avoidexcessiveheatandhumidity.
• Donotshort,heat,ortakeapartbatteries.
• Donotthrowbatteriesintofire.
• Ifyouwillnotbeusingtheremotecontrolforalongtime,removethebatteries.
• Ensurethatyouhavethebatteries’polarity(+/−)alignedcorrectly.
• Donotusenewandoldbatteriestogether,orusedifferenttypesofbatteriestogether.
• Disposeofusedbatteriesaccordingtoyourlocalregulations.
12
1. Introduction
Operating Range for Wireless Remote Control
7m/276inch
7m/276inch
Remotecontrol
Remotesensoronprojectorcabinet
7m/276inch
7m/276inch
30°
30°
30°
30°15°
30°
30°
30°15°
30°
• Theinfraredsignaloperatesbyline-of-sightuptoadistanceofabovemetersandwithina60-degreeangleoftheremotesensorontheprojectorcabinet.
• Theprojectorwillnotrespondifthereareobjectsbetweentheremotecontrolandthesensor,orifstronglightfallsonthesensor.Weakbatterieswillalsopreventtheremotecontrolfromproperlyoperatingtheprojector.
Using the Remote Control in Wired OperationConnectoneendoftheremotecabletotheREMOTEterminalandtheotherendtotheremotejackontheremotecontrol.
REMOTE
RemoteJack
NOTE: • WhenaremotecableisinsertedintotheREMOTEterminal,theremotecontroldoesnotworkforinfraredwirelesscommunication.• PowerwillnotbesuppliedtotheremotecontrolbytheprojectorviatheREMOTEjack.Batteryisneededwhentheremotecontrol
is used in wired operation.
13
Thissectiondescribeshowtoturnontheprojectorandtoprojectapictureontothescreen.
❶ Flow of Projecting an Image
Step 1• Connectingyourcomputer/Connectingthepowercord(→ page 14)
Step 2 • Turningontheprojector(→ page 17)
Step 3 • Selectingasource(→ page 20)
Step 4• Adjustingthepicturesizeandposition(→ page 22)
• Correctingkeystonedistortion[CORNERSTONE](→ page 42)
Step 5• Adjustingapicture
- Optimizingacomputersignalautomatically(→page33)
Step 6• Makingapresentation
Step 7• Turningofftheprojector(→ page 34)
Step 8• Afteruse(→ page 35)
2. Projecting an Image (Basic Operation)
14
2. Projecting an Image (Basic Operation)
❷ Connecting Your Computer/Connecting the Power Cord
1. Connectyourcomputertotheprojector.
Thissectionwillshowyouabasicconnectiontoacomputer.Forinformationaboutotherconnections,see“(2)MakingConnections”onpage143.
Connectthedisplayoutputterminal(miniD-sub15pin)onthecomputertotheCOMPUTERINterminalontheprojectorwithacommercially-availablecomputercable(withferritecore)andthenturntheknobsoftheterminalstosecurethem.
2. Connectthesuppliedpowercordtotheprojector.
WARNING
MAKESURETOTAKETHEGROUNDCONNECTIONFORTHEDEVICE.TOPREVENTFIREORSHOCK,DONOTEXPOSETHISUNITTORAINORMOISTURE.DONOTUSETHISUNIT'SPLUGWITHANEXTENSIONCORDOR INANOUTLETUNLESSALLTHEPRONGSCANBEFULLYINSERTED.
ImportantInformation:
• Whenplugginginorunpluggingthesuppliedpowercord,makesurethatthemainpowerswitchispushedtotheoff[O]position.Failuretodosomaycausedamagetotheprojector.
• Donotuseathree-phasepowersupply.Doingsomaycauseofmalfunction.
Firstconnectthesuppliedpowercord’sthree-pinplugtotheACINterminaloftheprojector,andthenconnecttheotherplugofthesuppliedpowercordinthewalloutlet.
COMPUTER IN
MakesurethattheprongsarefullyinsertedintoboththeACINterminalandthewalloutlet.
Towalloutlet
Computercable(withferritecore)(soldcommercially)
15
2. Projecting an Image (Basic Operation)
CAUTION:PartsoftheprojectormaybecometemporarilyheatediftheprojectoristurnedoffwiththePOWERbuttonoriftheACpowersupplyisdisconnectedduringnormalprojectoroperation.Usecautionwhenpickinguptheprojector.
Using the Supplied Power CordsSelectthepowercordsuitableforyourcountryorregion.
ForEurope/Asia/SouthAmerica ForNorthAmerica
(120V) (200V)
(→page183)
16
2. Projecting an Image (Basic Operation)
Using the Power Cord StopperTopreventthepowercordfromaccidentlyremovingfromtheACINoftheprojector,attachthepowercordstoppertoclampthepowercord.
CAUTION• Topreventthepowercordfromcomingloose,makesurethatalltheprongsofthepowercordarefullyinsertedintotheACINterminaloftheprojectorbeforeusingthepowercordstoppertofixthepowercord.Aloosecontactofthepowercordmaycauseafireorelectricshock.
Attaching the power cord stopper1. Raise up the power cord stopper and lay it over the power cord.
Powercordstopper
• Forreleasingthestopper,raiseupthestopperandlayitdowntotheoppositeside.
17
2. Projecting an Image (Basic Operation)
❸ Turning on the ProjectorNOTE:• Theprojectorhastwopowerswitches:AmainpowerswitchandaPOWERbutton(POWERONandOFFontheremotecontrol)•Turningontheprojector:1. Press the main power switch to the ON position (I).
Theprojectorwillgointostandbymode.
2. Press the POWER button .
Theprojectorwillbecomereadytouse.
•Turningofftheprojector:1. Press the POWER button.
Theconfirmationmessagewillbedisplayed.
2. Press the POWER button again.
Theprojectorwillgointostandbymode.
3. Press the main power switch to the OFF position (O).
Theprojectorwillbeturnedoff.
Preparation: Remove the lens cap from the lens unit.
1. Press the main power switch to the ON position ( I ).
ThePOWERindicatorlightsupred.*
* ThisindicatesthattheSTANDBYmodeisin[NORMAL]setting.
(→page134,186)
WARNING
Theprojector producesa strong light.When turningonthepower,makesurenoonewithinprojection range islookingatthelens.
NOTE: • The[STANDBYMODE]settingwillbedisabledandtheprojector
willgointothesleepmodewhenthenetworkserviceisutilizedortheprojectorreceivesHDBaseTsignal.Inthesleepmode,thefansin the projector rotate for the purpose of interior parts protection. Pleaserefertopage134aboutthesleepmode.
18
2. Projecting an Image (Basic Operation)
2. Press the (POWER) button on the projector cabinet or the POWER ON button on the remote control.
The POWER indicator goes from a steady red light toaflashingblue light,and thepicture isprojectedon thescreen.
TIP:• Whenthemessage“PROJECTORISLOCKED!ENTERYOUR
PASSWORD.” is displayed, it means that the [SECURITY]featureisturnedon.(→ page 45)
Afteryouturnonyourprojector,ensurethatthecomputerorvideosourceisturnedon.
NOTE:Thebluescreen([BLUE]background)isdisplayedwhennosignalisbeinginput(byfactorydefaultmenusettings).
Standby Blinking Power On
Steady red light Blinking blue light
Steady blue light
(→page186)
Performing Lens Calibration Afterinstallationorreplacementofthelens,besuretoperform[LENSCALIBRATION]bypressingandholdingtheSHUTTER/CALIBRATIONbutton on theprojector cabinet for at leasttwosecondsorbyholdingtheCTLbuttonandpressingtheINFO/L-CALIB.buttonontheremotecontrol.Calibrationcor-rectstheadjustablezoom,shift,andfocusrange.Ifcalibrationisnotperformed,youmaynotbeabletogetthebestfocusandzoomevenifyouadjustthefocusandzoomforthelens.• Thefollowinglensesneedcalibration: NP16FL,NP17ZL,NP18ZL,NP19ZL,NP20ZL,NP21ZL,NP31ZL
19
2. Projecting an Image (Basic Operation)
Note on Startup screen (Menu Language Select screen)Whenyoufirstturnontheprojector,youwillgettheStartupmenu.Thismenugivesyoutheopportunitytoselectoneofthe29menulanguages.
To select a menu language, follow these steps:
1. Use the ▲, ▼, ◀ or ▶buttontoselectoneofthe29languagesfromthemenu.
2. Press the ENTER button to execute the selection.
After this has been done, you can proceed to themenuoperation.Ifyouwant,youcanselectthemenulanguagelater.(→[LANGUAGE]onpage82and112)
NOTE: • Ifoneofthefollowingthingshappens,theprojectorwillnotturnon.
- Iftheinternaltemperatureoftheprojectoristoohigh,theprojectordetectsabnormalhightemperature.Inthisconditiontheprojectorwillnotturnontoprotecttheinternalsystem.Ifthishappens,waitfortheprojector’sinternalcomponentstocooldown.
- IftheSTATUSindicatorlightsorangewiththepowerbuttonpressed,itmeansthatthe[CONTROLPANELLOCK]isturnedon.Cancelthelockbyturningitoff.(→ page 124)
• WhilethePOWERindicatorisblinkingblueinshortcycles,thepowercannotbeturnedoffbyusingthepowerbutton.(WhilethePOWERindicatorisblinkingblueinlongcycles,theOFFTIMERisfunctionedandthepowercanbeturnedoff.)
20
2. Projecting an Image (Basic Operation)
❹ Selecting a SourceSelecting the computer or video sourceNOTE:Turnonthecomputerorvideosourceequipmentconnectedtotheprojector.
Detecting the Signal AutomaticallyPress theSOURCEbutton for 1 secondor longer.Theprojectorwillsearchfortheavailableinputsourceanddisplayit.Theinputsourcewillchangeasfollows:
HDMI→DisplayPort→BNC→BNC(CV)→BNC(Y/C)→COMUPTER→HDBaseT→SLOT→ …
• Pressitbrieflytodisplaythe[INPUT]screen.
Pressthe▼/▲buttonstomatchthetargetinputterminalandthenpresstheENTERbuttontoswitchtheinput.Todeletethemenudisplayinthe[INPUT]screen,presstheMENUorEXITbutton.
TIP:Ifnoinputsignalispresent,theinputwillbeskipped.
Using the Remote ControlPress any oneof theHDMI,DisplayPort,COMPUTER2,VIDEO,S-VIDEO,COMPUTER1,NETWORK,orSLOTbuttons.• COMPUTER2buttonselectstheBNCinputterminal.
• VIDEObuttonselectstheBNC(CV)inputterminal(CompositeVideo).
• S-VIDEObuttonselectstheBNC(Y/C)inputterminal(S-Video).
21
2. Projecting an Image (Basic Operation)
Selecting Default Source Youcansetasourceasthedefaultsourcesothatitwillbedisplayedeachtimetheprojectoristurnedon.
1. Press the MENU button.
Themenuwillbedisplayed.
2. Press the ▶buttontoselect[SETUP]andpressthe▼buttonortheENTERbuttontoselect[BASIC].
3. Press the ▶buttontoselect[SOURCEOPTIONS].
4. Press the ▼buttonfourtimestoselect[DEFAULTINPUTSELECT]andpresstheENTERbutton.
The[DEFAULTINPUTSELECT]screenwillbedisplayed.
(→page132)
5. Selectasourceasthedefaultsource,andpresstheENTERbutton.
6. Press the EXIT button three times to close the menu.
7. Restart the projector.
Thesourceyouselectedinstep5willbeprojected.
NOTE:Evenwhen[AUTO]isturnedon,the[HDBaseT]willnotbeautomaticallyselected.Tosetyournetworkasthedefaultsource,select[HDBaseT].
TIP:• WhentheprojectorisinStandbymode,applyingacomputersignalfromacomputerconnectedtotheCOMPUTERINinputwill
powerontheprojectorandsimultaneouslyprojectthecomputer’simage. ([AUTOPOWERONSELECT]→ page 135)• OntheWindows7keyboard,acombinationoftheWindowsandPkeysallowsyoutosetupexternaldisplayeasilyandquickly.
22
2. Projecting an Image (Basic Operation)
❺ Adjusting the Picture Size and PositionUsethelensshiftdial,theadjustabletiltfoot,thezoomringandthefocusringtoadjustthepicturesizeandposition.Inthischapterdrawingsandcablesareomittedforclarity.
Adjusting theprojected image’sverticalandhorizontalposition[Lensshift](→page23)
Adjustingthefocus[Focus](→page26)
Finelyadjustingthesizeofanimage[Zoom](→page31)
Adjustingtheprojectedimage’sheightandhorizontaltilt[Tiltfoot]*¹(→page32)
NOTE*1:Adjusttheprojectedimage’sheightusingthetiltfootwhenyouwanttoprojecttheimageatapositionhigherthanthelensshiftadjustmentrange.
TIP:• Built-intestpatternscanbeconvenientlyusedforadjustingthepicturesizeandposition.(→ page 86) ApressoftheTESTbuttonwilldisplaythetestpattern.The◀ or ▶ button can select one test pattern. To close the test pattern,
change the source to another.
23
2. Projecting an Image (Basic Operation)
Adjusting the vertical position of a projected image (Lens shift)
CAUTION• Performtheadjustmentfrombehindorfromthesideoftheprojector.Performingadjustmentfromthefrontcouldexposeyoureyestostronglightwhichcouldinjurethem.• Keephandsawayfromthelensmountingportionwhileperformingalensshift.Failuretodosocouldresultinfingersbeingpinchedbythemovinglens.
NOTE:• ThelensshiftfunctionisnotavailableontheprojectorwitheitherNP16FLorNP39MLlensinstalled. ForusingNP16FL,setbackthelenstothehomeposition. ForusingNP39ML,select[SETUP]→[INSTALLATION(2)]→[LENSPOSITION]→[TYPE]ontheonscreenmenu,thelenswill
bemovedtotheappropriatepositionautomatically.• Shiftingthelenstothemaximuminobliqueanglewillcausetheedgesoftheimagetobecomedarkorwillcausedarkshadows.
Adjusting with buttons on the cabinet1. Press the LENS SHIFT/HOME POSITION button.
The[LENSSHIFT]screenwillbedisplayed.
24
2. Projecting an Image (Basic Operation)
2. Press the ▼▲◀ or ▶ button.
Usethe▼▲◀▶buttonstomovetheprojectedimage.
• Returningthelensshiftpositiontothehomeposition
PressandholdtheLENSSHIFT/HOMEPOSITIONbuttonfor2secondstoreturnthelensshiftpositiontothehomeposition(nearlycenterposition)
25
2. Projecting an Image (Basic Operation)
Adjusting with the remote control1. HoldtheCTLbuttonandpresstheECO/L-SHIFTbutton.
The[LENSSHIFT]screenwillbedisplayed.
2. Press the ▼▲◀ or ▶ button.
Usethe▼▲◀▶buttonstomovetheprojectedimage.
NOTE:LensCalibrationIfthepoweroftheprojectoriswronglyshutdownduringthemotionoflensshift,itmayshiftthehomepositionofthelensandmaycauseofmalfunction.Inthiscase,performlenscalibration.Lenscalibrationprocedures1.Powerontheprojector.2.Pressthe(SHUTTER/CALIBRATION)buttononthecontrolpanelover2secondsorkeeppressingtheCTLbuttonandpressthe
INFO/L-CALIB.buttonontheremotecontrol. Calibrationisperformed.
TIP:• Thediagrambelowshowsthelensshiftadjustmentrange(projectionmode:desktopfront).Toraisetheprojectionpositionhigher
thanthis,adjustbythetiltfoot.(→ page 32)
100%V
50%V
30%V
100%H
20%H
10%H
10%H
20%H
Heightofprojectedimage
Widthofprojectedimage
Descriptionofsymbols:Vindicatesvertical(heightoftheprojectedimage),Hindicateshorizontal(widthoftheprojectedimage).
26
2. Projecting an Image (Basic Operation)
Focus
Applicablelensunit:NP16FL/NP17ZL/NP18ZL/NP19ZL/NP20ZL/NP21ZL1. PresstheFOCUS+/−button.
• Ontheremotecontrol,whilepressingontheCTLbutton,pressonVOL/FOCUS(+)or(−)button.
Thefocusisadjusted.
TIP:Toobtainthebestfocus,performthefollowing(forpermanentinstallation)Preparation:Warmuptheprojectorforonehour.
1. UsetheFOCUS+/−buttonstomakesureyouobtainthebestfocus.Ifyoudonot,movetheprojectorbackandforth.
2. Selectthe[TESTPATTERN]fromthemenuanddisplaythetestpattern.(→ page 86)
• YoucanalsousetheTESTbuttonontheremotecontroltodisplaythetestpattern.
3. KeeppressingtheFOCUS−buttonuntilthegridofthetextpatternismadeinvisible.
4. KeeppressingtheFOCUS+buttonuntilyouobtainthebestfocus.
Ifyouadjustbeyondthebestfocalpoint,gobacktostep3andrepeattheprocedures.
27
2. Projecting an Image (Basic Operation)
Applicablelensunit:NP31ZL1. Focusontheprojectedimagearoundtheopticalaxis.(Poweredfocus)
Thedrawingbelowshowsanexamplewhentheprojectedimageisshiftedupward.Inthiscasetheopticalaxisisatthebottomedgeoftheprojectedimage.
Adjusting with buttons on the cabinet
PresstheFOCUS+/−BUTTONonthecontrolpanel
Adjusting with the remote control
PresstheVOL/FOCUSbuttonholdingtheCTLbutton
Opticalaxis
* Whenthelensisatthecenterposition,theopticalaxisisatthecenteroftheimage.Inthiscase,adjustthefocusatthecenteroftheprojectedimage.
28
2. Projecting an Image (Basic Operation)
2. Adjustthefocusattheedgesoftheprojectedimage.(Manualfocus)
Turntheedgefocusringclockwiseorcounterclockwise.
Opticalaxis
Thiscompletesadjustingtheprojectedimage’soverallfocus.
NOTE:TheNP31ZLsupportstheLensMemoryfunction,whichallowsyoutostoreadjustedvalueforLensShift,Zoom,andFocus.IfyouaccidentallymovetheEdgefocusring(drawingshownbelow)afterhavingstoredadjustedvalues,theadjustedvaluesstoredintheLensMemorywillnotbecorrectlyapplied.
Edgefocusring
Afterhavingremovedthelensfromtheprojectorandmounteditback,calluptheadjustedvaluesstoredintheLensMemoryandthenfollowStep2intheprocedureabovetoadjustthefocusattheedgesoftheprojectedimageagain.
29
2. Projecting an Image (Basic Operation)
TIP:Toobtainthebestfocus,performthefollowing(forpermanentinstallation)Preparation:Warmuptheprojectorforonehour.1.PresstheFOCUS+/−buttonstochecktheadjustablefocusrange.Forcheckingitbytheremotecontrol,pressandholdtheCTL
buttonandpressVOL./FOCUS+/−button.Iftheprojectorinuseisnotwithintheadjustablefocusrange,movetheprojectorbackand forth.
2.Selectthe[TESTPATTERN]fromthemenuanddisplaythetestpattern.(→ page 86)• Fordisplayingthetestpatternbytheremotecontrol,pressTESTbutton.
3.KeeppressingtheFOCUS−buttonuntilthegridofthetextpatternbecomesinvisible.4.KeeppressingtheFOCUS+buttonuntilyouobtainthebestfocus. Forobtainingthebestfocusbytheremotecontrol,presstheVOL./FOCUS+buttonwhileholdingtopresstheCTLbutton. Ifyouadjustbeyondthebestfocalpoint,gobacktostep3andrepeattheprocedures.5.Turntheedgefocusringclockwiseorcounterclockwisetoadjustthefocusattheedgesoftheprojectedimage.
Applicablelensunit:NP39ML1. Focusontheprojectedimagearoundtheopticalaxis.(Poweredfocus)
Theopticalaxisisatthebottomoftheimage.
PresseithertheFOCUS+/−buttononthecontrolpanelortheVOL/FOCUS+/−buttonwhileholdingtopresstheCTLbuttonontheremotecontrol.
Opticalaxis
30
2. Projecting an Image (Basic Operation)
2. Adjustthefocusattheedgesoftheprojectedimage.
PresseithertheZOOM+/−buttononthecontrolpanelortheD-ZOOM/ZOOM+/−buttonwhileholdingtopresstheCTLbuttonontheremotecontrol.
Focusaroundtheopticalaxissetatstep1isremainedunchanged.
Opticalaxis
3. Repeatsteps1and2untiltheoptimalfocuscanbeobtainedonwholeimage.
TIP:Toobtainthebestfocus,performthefollowing(forpermanentinstallation)Preparation:Warmuptheprojectorforonehour.
1. UsetheFOCUS+/−buttonstomakesureyouobtainthebestfocus.Ifyoudonot,movetheprojectorbackandforth.
2. Selectthe[TESTPATTERN]fromthemenuanddisplaythetestpattern.(→ page 86)
• YoucanalsousetheTESTbuttonontheremotecontroltodisplaythetestpattern.
3. KeeppressingtheFOCUS−buttonuntilthegridofthetextpatternismadeinvisible.
4. KeeppressingtheFOCUS+buttonuntilyouobtainthebestfocus.
Ifyouadjustbeyondthebestfocalpoint,gobacktostep3andrepeattheprocedures.
5. PresstheZOOM+/−buttonforadjustingtheedgesoftheprojectedimage.
PresstheD-ZOOM/ZOOM+/−buttonholdingtopresstheCTLbuttonforadjustingitbytheremotecontrol.
Repeatsteps1to5untiltheoptimalfocuscanbeobtainedonwholeimage.
31
2. Projecting an Image (Basic Operation)
Zoom
Applicablelensunits:NP17ZL/NP18ZL/NP19ZL/NP20ZL/NP21ZL/NP31ZL1. Press the ZOOM +/− button.
• Ontheremotecontrol,whilepressingontheCTLbutton,presstheD-ZOOM/ZOOM(+)or(−)button.
Thezoomisadjusted.
32
2. Projecting an Image (Basic Operation)
Adjusting the Tilt Foot1. Theposition toproject imagemaybeadjustedby the tilt foot
positionedatfourcornersofthecabinetbottom.
Thetiltfootheightcanbeadjustedbyitsturn.
“Toadjusttheheightoftheprojectedimage”
Theheightoftheprojectedimageisadjustedbyturningeitherfrontorreartiltfoot.
“Iftheprojectedimageistilted”
Iftheprojectedimageistilted,turneitherleftorrighttiltfoottoadjusttheimagesothatitislevel.
• Iftheprojectedimageisdistorted,see“3-7CorrectingHorizontalandVerticalKeystoneDistortion[CORNERSTONE]”(→page42) and“[GEOMETRICCORRECTION]”(→page105).
• Thetiltfootcanbelengthenedbyamaximumof48mm.
• Thetiltfootcanbeusedtotilttheprojectorbyamaximumof6°.
NOTE:• Donotlengthenthetiltfootanymorethan50mm/1.9".Doingsowillmakethe
tiltfeet’smountsectionunstableandcouldcausethetiltfeettocomeofftheprojector.
• Payattentiontolengthenorshortentwotiltfootatfrontatthesametime.Samefor the rear foot, otherwise, the weight of the projector is loaded on one side anditmaycauseofdamagetoit.
• Donotuse the tilt foot foranypurposeother thanadjusting theprojector’sprojection angle.
Handlingthetiltfootimproperly,suchascarryingtheprojectorbygraspingthetiltfootorhookingitontoawallusingthetiltfoot,coulddamagetheprojector.
• PleasechecklevelofthelensunitWhenthelensunitNP39MLisinstalledonsincethelensunitmaysligtlyinclineinleftorright.
Tiltfoot(thereisonemoreintherear)
Up Down
33
2. Projecting an Image (Basic Operation)
❻ Optimizing Computer Signal AutomaticallyAdjusting the Image Using Auto AdjustWhenanimagefromHDMIIN,DisplayPortIN,BNCinputterminal(analogRGB),COMPUTERIN,orHDBaseTisbeingprojected,andtheedgeiscutoffortheimagequalityispoor,thisbuttoncanbeusedtoautomaticallyoptimizetheprojectionimageonthescreen.
PresstheAUTOADJ.buttontooptimizeacomputerimageautomatically.
[Poorpicture] [Adjustedpicture]
NOTE:Somesignalsmaytaketimetodisplayormaynotbedisplayedcorrectly.• IftheAutoAdjustoperationcannotoptimizethecomputersignal,trytoadjust[HORIZONTAL],[VERTICAL],[CLOCK],and[PHASE]
manually.(→ page 94, 95)• Ifyoucannotobtainanoptimizedpicture,referpage190.
34
2. Projecting an Image (Basic Operation)
❼ Turning off the Projector1. Press the (POWER) button on the projector cabinet
or the POWER OFF button on the remote control.
The[POWEROFF/AREYOUSURE?/CARBONSAV-INGS-SESSION0.000[g-CO2]]messagewillappear.
2. Press one among the ENTER, the (POWER), and the POWER OFF button.
When theprojector is inSTANDBYMODE, thePOWERindicator lights up red. (When [STANDBY MODE] is in[NORMAL]setting)
• Ifyoudonotwanttoturnoff,select[NO]by◀/▶buttonandpressENTER.
3. Make sure the projector is in STANDBY MODE, then turnoffthemainpowerswitch(○ OFF)
ThePOWERindicatorwillgooffandthemainpowerwillturnoff.
• While the POWER indicator is blinking blue in shortcycles,thepowercannotbeturnedoff.
Power On
Steady blue light
Standby
Steady red lightPress twice
CAUTION:PartsoftheprojectormaytemporarilyoverheatiftheprojectoristurnedoffwiththemainpowerswitchortheACpowersupplyisdisconnectedwhiletheprojectorisinoperationorthecoolingfanisrunning.Handlewithcare.
35
2. Projecting an Image (Basic Operation)
NOTE:• Donotunplugthepowercordfromtheprojectororfromthepoweroutletwhileanimageisbeingprojected.Doingsocould
deterioratetheprojector’sACINterminalorthepowerplug’scontact.ToturnofftheACpowersupplywhentheprojectorispoweredon,usetheprojector’smainpowerswitch,apowerstripequippedwithaswitch,orabreaker.
• DonotturnoffthemainpowerswitchordisconnecttheACpowersupplywithin10secondsofmakingadjustmentsorsettingchangesandclosingthemenu.Doingsocancauselossofadjustmentsandsettings.
❽ After UsePreparation:Makesurethattheprojectoristurnedoff.
1. Unplug the power cord.
2. Disconnect any other cables.
3. Mount the lens cap on the lens.
4. Beforemovingtheprojector,screwinthetiltfeetiftheyhavebeenlengthened.
36
3. Convenient Features❶ Turn off the light of the projector (LENS SHUTTER)PresstheSHUTTERbutton.Thelightsourcewillturnofftemporarily.Pressagaintoallowthescreentobecomeilluminatedagain.• Anotherwaytoshut the lightsourceoff is topresstheSHUTTERbuttonontheremotecontrol.
• Youcansettheprojectionlighttograduallyfadeinorout.
NOTE: • DonotpressandholdtheSHUTTER/CALIBRATIONbuttononthecabinetover
2seconds.Itwillstartthelenscalibration.
❷ Turning off the ImagePresstheAV-MUTEbuttontoturnofftheimageforashortperiodoftime.Pressagaintorestoretheimage.
TIP:• Thevideowilldisappearbutnotthemenudisplay.
❸ Turning Off the On-Screen Menu (On-Screen Mute)ApressoftheON-SCREENbuttonontheremotecontrolwillhidetheon-screenmenu,thesourcedisplayandothermessages.Pressagaintorestorethem.
TIP:• Toconfirmthattheon-screenmuteisturnedon,presstheMENUbutton.Iftheon-screenmenuisnotdisplayedeventhough
youpresstheMENUbutton,itmeanstheon-screenmuteisturnedon.• Theon-screenmuteismaintainedevenwhentheprojectoristurnedoff,• HoldingdowntheMENUbuttonontheprojectorcabinetforatleast10secondswillturnofftheon-screenmute.
37
3. Convenient Features
❹ Freezing a PictureHoldtheCTLbuttonandpressthePIP/FREEZEbuttontofreezeapicture.Pressagaintoresumemotion.
NOTE:Theimageisfrozenbuttheoriginalvideoisstillplayingahead.
38
3. Convenient Features
❺ Magnifying a PictureYoucanmagnifythepictureuptofourtimes.
NOTE: • Dependingonaninputsignal,themaximummagnificationmaybelessthanfourtimes,orthefunctionmayberestricted.
Todoso:
1. PresstheD-ZOOM(+)buttontomagnifythepicture.
2. Press the ▲▼◀▶ button. Theareaofthemagnifiedimagewillbemoved
3. Press the D-ZOOM (−) button.
EachtimetheD-ZOOM(−)buttonispressed,theimageisdemagni-fied.
NOTE: • Theimagewillbemagnifiedordemagnifiedatthecenterofthescreen.• Displayingthemenuwillcancelthecurrentmagnification.
39
3. Convenient Features
❻ Changing LIGHT MODE/Checking Energy-Saving Effect Using LIGHT MODE [LIGHT MODE]Wheneither[ECO1]or[ECO2]in[LIGHTMODE]isselected,motionnoiseoftheprojectoriscutdownbyloweringbrightnessofitslightsource.Bysavingenergyconsumption,theCO2emissionfromthisprojectorcanbereduced.
LIGHTMODEIconatthebottomofthemenu
Description
NORMAL 100%brightnessThescreenwillbebrightlylit.
ECO1 Brightnesswillbeatabout80%.Thecoolingfanwillalsoslowdownaccordingly.Lowerpowerconsumption
ECO2 Brightnesswillbeatabout50%.Thecoolingfanwillalsoslowdownaccordingly.Lowerpowerconsumptionconsiderably
Toturnonthe[LIGHTMODE],dothefollowing:1. Press LIGHT button on the cabinet.
• Inanotherway,pressECO/L-SHIFTbuttonontheremotecontrol.
The[LIGHTMODE]screenwillbedisplayed.
2. Press the ENTER button.
The[LIGHTMODE]selectionscreenwillbedisplayed.
3. Use the ▼▲ buttons to make a selection, and press the ENTER button.
Thedisplaywillreturntothe[LIGHTMODE]screenandtheselectedoptionwillbeapplied.
PresstheMENUbuttontoreturntotheoriginalscreen.
40
3. Convenient Features
NOTE: • The[LIGHTMODE]canbechangedbyusingthemenu. Select[SETUP]→[INSTALLATION(1)]→[LIGHTMODE]→[LIGHTMODE].• Thelightmodulehoursusedcanbecheckedin[USAGETIME]onthemenu.Select[INFO.]→[USAGETIME].• Afteralapseof1minutefromwhentheprojectordisplaysablue,blackorlogoscreen,[LIGHTMODE]willautomaticallyswitch
to[ECO].• Thisprojectorequipsthesensortodetectatmosphericpressureandtemperatureandtheprojectorcontrolsthepowerbasedon
thedetectedvalues.Whentheprojectorisusedinhighaltitudeandhightemperature,thelightsourcebrightnessbecomeslowerregardlessofthesettingforLIGHTMODE.Thisiscalled“ForcedECOMODE”.PleasereferthebelowtablefortheconditionsandoutputpowerinForcedECOMODE.
Altitudes Atmospherictemperature
5–25°C(41–77°F)
26–30°C(78–86°F)
31–35°C(87–95°F)
36–40°C(96–104°F)
1600–3000m(5500–10000ft)
100% 90% 80% 70%
1200–1600m(4000–5500ft)
100% 90% 80%
0–1200m(0–4000ft)
100% 80%
• WhentheprojectorisintheForcedLIGHTMODE,thepicturebrightnessdecreasesslightlyandtheTEMP.indicatorlightsorange.AtthesametimetheThermometersymbol[ ]isdisplayedatthebottomrightofthescreen.
Whentheprojectorcomesbacktonormaltemperature,theForcedECOMODEiscancelledandthe[LIGHTMODE]returnsto[NORMAL]mode.
41
3. Convenient Features
Checking Energy-Saving Effect [CARBON METER]Thisfeaturewillshowenergy-savingeffectintermsofCO2emissionreduction(kg)whentheprojector’s[LIGHTMODE]issettoeither[ECO1]or[ECO2].Thisfeatureiscalledas[CARBONMETER].
Therearetwomessages:[TOTALCARBONSAVINGS]and[CARBONSAVINGS-SESSION].The[TOTALCARBONSAVINGS]messageshowsthetotalamountofCO2emissionreductionfromthetimeofshipmentuptonow.Youcanchecktheinformationon[USAGETIME]from[INFO.]ofthemenu.(→page137)
The[CARBONSAVINGS-SESSION]messageshowstheamountofCO2emissionreductionbetweenthetimeofchangingtoLIGHTMODEimmediatelyafterthetimeofpower-onandthetimeofpower-off.The[CARBONSAVINGS-SESSION]messagewillbedisplayedinthe[POWEROFF/AREYOUSURE?]messageatthetimeofpower-off.
TIP:• TheformulashownbelowisusedtocalculatetheamountofCO2emissionreduction.AmountofCO2emissionreduction=(Power
consumptionin[NORMAL]LIGHTMODE–Powerconsumptionincurrentsetting)×CO2conversionfactor.*Whenanenergy-savingLIGHTMODEisselected,ortheLensShutterisused,therewillbeafurtherreductioninCO2emission.* CalculationforamountofCO2emissionreductionisbasedonanOECDpublication“CO2EmissionsfromFuelCombustion,
2008Edition”.• The[TOTALCARBONSAVINGS]iscalculatedbasedonsavingsrecordedin15minutesintervals.• Thisformulawillnotapplytothepowerconsumptionwhichisnotaffectedbywhether[LIGHTMODE]isturnedonoroff.
42
3. Convenient Features
❼ Correcting Horizontal and Vertical Keystone Distortion [CORNERSTONE]
Usethe[CORNERSTONE]featuretocorrectkeystone(trapezoidal)distortiontomakethetoporbottomandtheleftorrightsideofthescreenlongerorshortersothattheprojectedimageisrectangular.
1. Pressandholdthe3DREFORMbuttonfor2secondsatleasttoresetcurrentadjustments.
Currentadjustmentsfor[GEOMETRICCORRECTION]willbecleared.
2. Projectanimagesothatthescreenissmallerthantheareaoftheraster.
Projectedimage
Thedrawingshowstheupperrightcorner.
3. Pickupanyoneofthecornersandalignthecorneroftheimagewithacornerofthescreen.
4. Press the 3D REFORM button.
Displaythe[GEOMETRICCORRECTION]screenoftheon-screenmenu.
43
3. Convenient Features
5. Press the ▼buttontoalignwiththe[CORNERSTONE]andthenpresstheENTERbutton.
Thedrawingshowstheupperlefticon( )isselected.
Thescreenwillswitchtothe[CORNERSTONE]screen.
NOTE:• Whena[GEOMETRICCORRECTION]functionotherthan[CORNERSTONE]hasbeensetup,the[CORNERSTONE]screen
willnotbedisplayed.Whenthescreenisnotdisplayed,eitherpressthe3DREFORMbuttonfor2ormoreseconds,orrun[RESET]in[GEOMETRICCORRECTION]tocleartheadjustmentvalueof[GEOMETRICCORRECTION].
6. Use the ▲▼◀▶ button to select one icon (▲) which points in the direction you wish to move the projected imageframe.
7. Press the ENTER button.
8. Use the ▲▼◀▶buttontomovetheprojectedimageframeasshownontheexample.
9. PresstheENTERbutton.
10. Use the ▲▼◀▶ button to select another icon which points in the direction.
11.Repeatstepsfrom7to10tocompletethecornerstoneadjustment.
12.Onthe[CORNERSTONE]screen,select[EXIT]orpresstheEXITbuttonontheremotecontrol.
Theconfirmationscreenisdisplayed.
44
3. Convenient Features
13. Press the ◀ or ▶buttontohighlightthe[OK]andpresstheENTERbutton.
Thiscompletesthe[CORNERSTONE]correction.
• Returningtothe[CORNERSTONE]screen,select[CANCEL]andpresstheENTERbutton.
NOTE: • Eveniftheinstallationangleischangedwhentheprojectoristurnedonagain,thecorrectionvaluesintheprevioustimehasbeen
maintained.• Carryouteitheroneofthefollowingactionstocleartheadjustmentvalueof[CORNERSTONE].
• InStep12,select[RESET]andthenpresstheENTERbutton.• Pressthe3DREFORMbuttonfor2ormoreseconds.• Run[DISPLAY]→[GEOMETRICCORRECTION]→[RESET]intheon-screenmenu.
• UsingCORNERSTONEcorrectioncancausetheimagetobeslightlyblurredbecausethecorrectionismadeelectronically.
45
3. Convenient Features
❽ Preventing the Unauthorized Use of the Projector [SECURITY]AkeywordcanbesetforyourprojectorusingtheMenutoavoidoperationbyanunauthorizeduser.Whenakeywordisset,turningontheprojectorwilldisplaytheKeywordinputscreen.Unlessthecorrectkeywordisentered,thepro-jectorcannotprojectanimage.•The[SECURITY]settingcannotbecancelledbyusingthe[RESET]ofthemenu.
To enable the Security function:
1. Press the MENU button.
Themenuwillbedisplayed.
2. Press the ▶buttontwicetoselect[SETUP]andpressthe▼buttonortheENTERbuttontoselect[MENU].
3. Press the ▶buttontoselect[CONTROL].
4. Press the ▼buttonthreetimestoselect[SECURITY]andpresstheENTERbutton.
TheOFF/ONmenuwillbedisplayed.
5. Press the ▼buttontoselect[ON]andpresstheENTERbutton.
The[SECURITYKEYWORD]screenwillbedisplayed.
6. Typeyourkeywordinacombinationofthefour▲▼◀▶ buttons and press the ENTER button.
NOTE:Akeywordmustbe4to10digitsinlength.
The[CONFIRMKEYWORD]screenwillbedisplayed.
NOTE:Makeanoteofyourpasswordandstoreitinasafeplace.
46
3. Convenient Features
7. Typeyourkeywordinthesamecombinationof▲▼◀▶ buttons and press the ENTER button.
Theconfirmationscreenwillbedisplayed.
8. Select[YES]andpresstheENTERbutton.
TheSECURITYfunctionhasbeenenabled.
Toturnontheprojectorwhen[SECURITY]isenabled:
1. Press the button.
• Ifusingtheremotecontrol,pressthePOWERONbutton.
Theprojectorwillbeturnedonanddisplayamessagetotheeffectthattheprojectorislocked.
2. Press the MENU button.
3. Type in the correct keyword and press the ENTER button. The projector will display an image.
NOTE:Thesecuritydisablemodeismaintaineduntilthemainpoweristurnedofforunpluggingthepowercord.
47
3. Convenient Features
TodisabletheSECURITYfunction:
1. Press the MENU button.
Themenuwillbedisplayed.
2. Select[SETUP]→[CONTROL]→[SECURITY]andpresstheENTERbutton.
TheOFF/ONmenuwillbedisplayed.
3. Select[OFF]andpresstheENTERbutton.
TheSECURITYKEYWORDscreenwillbedisplayed.
4. Type in your keyword and press the ENTER button.
Whenthecorrectkeywordisentered,theSECURITYfunctionwillbedisabled.
NOTE:Ifyouforgetyourkeyword,contactyourdealer.Yourdealerwillprovideyouwithyourkeywordinexchangeforyourrequestcode.YourrequestcodeisdisplayedintheKeywordConfirmationscreen.Inthisexample[NB52-YGK8-2VD6-K585-JNE6-EYA8]is a request code.
48
3. Convenient Features
❾ Projecting 3D videosThisprojectorsupportsDLP-Linkglassesand3Demitter.
CAUTION
Health precautionsBeforeuse,pleasemakesuretoreadanyhealthprecautionsthatmaybestatedintheoperatingmanualsenclosedwiththe3Deyewearand3Dvideosoftware(Blu-rayplayer,games,computeranimationfiles,etc.).Pleasetakenoteofthefollowinginordertoavoidadversehealtheffects.• Pleasedonotusethe3Deyewearforpurposesotherthantowatch3Dvideos.• Pleasekeepadistanceofatleast2mawayfromthescreenwhenwatchingvideos.Watchingavideotooclosetothescreenwillincreaseeyefatigue.• Pleasedonotwatchvideoscontinuouslyforalongperiodoftime.Pleasetakea15minutes’breakaftereveryhourofwatching.• Pleaseconsultadoctorbeforewatchingifyouoranyofyourfamilymembershaveahistoryofsufferingfromseizurescausedbylightsensitivity.• Pleasestopwatchingimmediatelyandtakearestwhenyoufeelphysicallyunwellwhilewatching(vomiting,gid-diness,nausea,headaches,soreeyes,blurredvision,crampsanddumbnessinthelimbs,etc.).Pleaseconsultadoctorifthesymptomspersist.• Pleasewatcha3Dvideodirectlyinfrontofthescreen.Ifyouwatcha3Dvideoobliquelyfromthesides,thismayresultinphysicalandeyefatigue.
Procedure to watch 3D videos using this projectorThedescriptionhereareforDLP®Link.[DLP®Link]isdefaultsettingfor[3DGLASSES]atthefactory.
3D eyewear and 3D emitter preparationsUseDLP®Linkglassesorothercompatiblecommercially-availableliquidcrystalshutterspectacles.
1. Connectthevideodevicetotheprojector.
2. Switch on the projector.
3. Runthe3Dvideosoftware.
The3Dvideowillbeprojected.
Thedefaultfactorysettingis[AUTO].When3Dimageisnotprojected,itmaycauseinputsignaldoesnotcontain3Ddetectionsignaloritcannotbedetectedbythisprojector.Inthiscase,pleasesetuptheformatmanually.
(1)PresstheMENUbutton.
TheMENUwillbedisplayed.
(2)Pressthe▶button,select[ADJUST],thenpressENTER.
[PICTURE]willbehighlighted.
(3)Usethe▶buttontoselect[3DSETTINGS].
49
3. Convenient Features
The[3DSETTINGS]screenwillbedisplayed.
(4)Usethe▼buttontoalignthecursorwith[FORMAT],thenpressENTER.
The[FORMAT]screenwillbedisplayed.
(5)Usethe▼/▲buttonstoalignthecursoratoneamongformatoptions,thenpressENTERforsettingitup.
Thedisplaywillreturntothe[FORMAT]screen.
PresstheMENUbuttontoreturntotheoriginalscreen.
• The3Dcautionmessagescreenwillbedisplayedwhenswitchingtoa3Dvideo(defaultfactorysettingwhenshipped).Pleasereadthe“HealthPrecautions”onthepreviouspagetowatchvideosinthecorrectmanner.Thescreenwilldisappearafter60secondsorwhentheENTERbuttonispressed.(→page113)
4. Turnonthepowersupplyofthe3Deyewearandweartheeyeweartowatchthevideo.
Anormalvideowillbeshownwhena2Dvideoisinput.
Towatcha3Dvideoin2D,select[OFF(2D)]inthe[FORMAT]screenmentionedabovein(3).
NOTE:• If3Dcontentisplayedbackonyourcomputerandtheperformanceispoor,itmaybecausedbytheCPUorgraphicschip.Inthis
caseyoumayhavedifficultyseeingthe3Dimagesastheywereintended.Checktoseeifyourcomputermeetstherequirementsprovidedinyouruser’smanualincludedwithyour3Dcontent.
• TheDLP®Linkcompatible3Deyeglassesallowyoutoview3Dimagesbyreceivingsynchsignals,whichareincludedinlefteyeandrighteyeimages,reflectedfromthescreen.Dependingonenvironmentsorconditionssuchastheambientbrightness,screensizeorviewingdistance,the3Deyeglassesmayfailtoreceivesynchsignals,causingpoor3Dimages.
• Whenthe3Dmodeisenabled,theKeystonecorrectionrangewillbenarrower.• Whenthe3Dmodeisenabled,thefollowingsettingsareinvalid. [WALLCOLOR],[PRESET],[REFERENCE],[COLORTEMPERATURE],[DYNAMICCONTRAST],[BrilliantColor]• Signalsotherthanthoselistedin“CompatibleInputSignalList”onpage178 and 179willbeoutofrangeordisplayedin2D.
50
3. Convenient Features
Using a 3D emitterThisprojectorcanbeusedtowatchvideosin3Dusingcommercially-availableactiveshutter-type3Deyewear.Inordertosynchronizethe3Dvideoandeyewear,acommercially-available3Demitterneedstobeconnectedtotheprojector(ontheprojectorside).The3Deyewearreceivesinformationfromthe3Demitterandperformsopeningandclosingontheleftandright.
3D eyewear and 3D emitter preparationsPleaseuseanactiveshutter-type3DeyewearthatconformswiththeVESAstandard.Acommercially-availableRFtypemadebyXpandisrecommended.
3D eyewear ������������ Xpand X105-RF-X23D emitter �������������� Xpand AD025-RF-X1
Connectyour3Demittertothe3DSYNCterminaloftheprojector.Change[3DGLASSES]settingto[OTHERS].
NOTE:• Uponswitchingto3Dimage,thefollowingfunctionswillbecancelledanddisabled.[BLANKING],[PIP/PICTUREBYPICTURE],
[GEOMETRICCORRECTION],[EDGEBLENDING]([GEOMETRICCORRECTION]and[EDGEBLENDING]adjustmentvalueswillbemaintained.)
• Theoutputmaynotautomaticallyswitchtoa3Dvideodependingonthe3Dinputsignal.• ChecktheoperatingconditionsdescribedintheusermanualoftheBlu-rayplayer.• PleaseconnecttheDINterminalofthe3Demittertothe3DSYNCofthemainprojector.• The3Deyewearallowsvideostobeviewedin3Dbyreceivingsynchronizedopticalsignalsoutputfromthe3Demitter. Asaresult,the3Dimagequalitymaybeaffectedbyconditionssuchasthebrightnessofthesurroundings,screensize,viewing
distance, etc.• Whenplayinga3Dvideosoftwareonacomputer,the3DimagequalitymaybeaffectedifthecomputerCPUandgraphicschip
performancearelow.Pleasechecktherequiredoperatingenvironmentofthecomputerthatisstatedintheoperatingmanualattachedtothe3Dvideosoftware.
• Dependingonthesignal,[FORMAT]and[L/RINVERT]maynotbeabletobeselected.Pleasechangethesignalinthatcase.
51
3. Convenient Features
When videos cannot be viewed in 3DPleasecheckthefollowingpointswhenvideoscannotbeviewedin3D.Pleasealsoreadtheoperatingmanualattachedtothe3Deyewear.
Possible reasons Solutions
The selected signal does not support 3D output� Please change the video signal input to one that supports 3D�
The format for the selected signal is turned to [OFF(2D)]� Please change the format in the on-screen menu to [AUTO] or a format that supports 3D�
A eyewear that is not supported by the projector is being used� Please purchase a commercially-available 3D eyewear or 3D emit-ter (recommended)� (→ page 50)
Please check the following points when a video cannot be viewed in 3D using a 3D eyewear that is supported by the projector�
The power supply of the 3D eyewear is turned off� Please turn on the power supply of the 3D eyewear�
The internal battery of the 3D eyewear is flat� Please charge or replace the battery�
The viewer is located too far away from the screen� Please get closer to the screen until the video can be seen in 3D�
Please turn the L/R INVERT in the on-screen menu to [OFF]�
Due to multiple 3D projectors working at the same time in the vicinity, the projectors may interfere with one another� Alter-natively, there may be a bright light source near the screen�
Please maintain sufficient distance between the projectors�
Please keep the light source away from the screen�
Please turn the L/R INVERT in the on-screen menu to [OFF]�
Please check the following points when videos played back on the computer cannot be viewed in 3D�
Settings on the computer are not compatible with 3D video playback�
Check to make sure that settings on the computer meet require-ments for 3D video playback�
Image resolution on the computer cannot be recognized by the projector as 3D video�
Change the image resolution on the computer to one that the projector can recognize as 3D video�
The vertical scan rate on the computer cannot be recognized by the projector as 3D video�
Change the vertical scan rate on the computer to 60 Hz or 120 Hz�
There is an obstacle between the optical receiver of the 3D eye-wear and the 3D emitter�
Please remove the obstacle�
The 3D format of the 3D video contents is not supported� Please check with the company selling the 3D video contents�
52
3. Convenient Features
❿ Controlling the Projector by Using an HTTP BrowserOverviewTheHTTPServerfunctionprovidessettingsandoperationsfor:1. Settingforwirednetwork(NETWORKSETTINGS)
TousewiredLANconnection,connecttheprojectortothecomputerwithacommerciallyavailableLANcable.(→ page152)
2. Setting Alert Mail (ALERT MAIL)
Whentheprojectorisconnectedtoawirednetwork,errormessageswillbesentviae-mail.
3. Operating the projector
Poweron/off,selectinginput,volumecontrolandpictureadjustmentsarepossible.
4. SettingPJLinkPASSWORDandAMXBEACON
AccesstotheHTTPserverfunctionisavailable:• StarttheWebbrowseronthecomputerviathenetworkconnectedtotheprojectorandenterthefollowing
URL :
http://<the projector’s IP address> /index.html
TIP:ThefactorysettingIPaddressis[DHCPON].
NOTE: • Tousetheprojectorinanetwork,consultwithyournetworkadministratoraboutnetworksettings.• Thedisplay’sorbutton’sresponsecanbesloweddownoroperationmaynotbeaccepteddependingthesettingsofyournetwork. Shouldthishappen,consultyournetworkadministrator.Theprojectormaynotrespondifitsbuttonsarerepeatedlypressedin
rapidintervals.Shouldthishappen,waitamomentandrepeat.Ifyoustillcan’tgetanyresponse,turnoffandbackontheprojec-tor.
• IfthePROJECTORNETWORKSETTINGSscreendoesnotappearinthewebbrowser,presstheCtrl+F5keystorefreshyourwebbrowser(orclearthecache).
• Thisprojectoruses“JavaScript”and“Cookies”andthebrowsershouldbesettoacceptthesefunctions.Thesettingmethodwillvarydependingontheversionofbrowser.Pleaserefertothehelpfilesandtheotherinformationprovidedinyoursoftware.
Preparation before UseConnecttheprojectortoacommerciallyavailableLANcablebeforeengaginginbrowseroperations.(→page152)Operationwithabrowserthatusesaproxyservermaynotbepossibledependingonthetypeofproxyserverandthesettingmethod.Althoughthetypeofproxyserverwillbeafactor,itispossiblethatitemsthathaveactuallybeensetwillnotbedisplayeddependingontheeffectivenessofthecache,andthecontentssetfromthebrowsermaynotbereflectedinoperation.Itisrecommendedthataproxyservernotbeusedunlessitisunavoidable.
53
3. Convenient Features
Handling of the Address for Operation via a BrowserRegardingtheactualaddressthatisenteredfortheaddressorenteredtotheURLcolumnwhenoperationofthepro-jectorisviaabrowser,thehostnamecanbeusedasitiswhenthehostnamecorrespondingtotheIPaddressoftheprojectorhasbeenregisteredtothedomainnameserverbyanetworkadministrator,orthehostnamecorrespondingtotheIPaddressoftheprojectorhasbeensetinthe“HOSTS”fileofthecomputerbeingused.
Example1:Whenthehostnameoftheprojectorhasbeensetto“pj.nec.co.jp”,accessisgainedtothenetworksettingbyspecifying http://pj.nec.co.jp/index.html fortheaddressortheentrycolumnoftheURL.
Example2:WhentheIPaddressoftheprojectoris“192.168.73.1”,accessisgainedtothenetworksettingbyspecifying http://192.168.73.1/index.html fortheaddressortheentrycolumnoftheURL.
PROJECTOR ADJUSTMENT
POWER:Thiscontrolsthepoweroftheprojector.ON ������������������������� Power is switched on�OFF ������������������������ Power is switched off�
VOLUME:Cannotbeusedforthisdevice.
AV-MUTE:Thiscontrolsthemutefunctionoftheprojector.PICTURE ON ���������� Mutes the video�PICTURE OFF ��������� Cancels the video muting�SOUND ON ������������ Cannot be used for this device�SOUND OFF ����������� Cannot be used for this device�ALL ON ������������������ Mutes the video functions�ALL OFF ����������������� Cancels the muting of the video functions�
54
3. Convenient Features
PICTURE:Controlsthevideoadjustmentoftheprojector.BRIGHTNESS ▲ ���� Increases the brightness adjustment value�BRIGHTNESS ▼ ���� Decreases the brightness adjustment value�CONTRAST ▲ �������� Increases the contrast adjustment value�CONTRAST ▼ �������� Decreases the contrast adjustment value�COLOR ▲ �������������� Increases the color adjustment value�COLOR ▼ �������������� Decreases the color adjustment value�HUE ▲ ������������������� Increases the hue adjustment value�HUE ▼ ������������������� Decreases the hue adjustment value�SHARPNESS ▲ ����� Increases the sharpness adjustment value�SHARPNESS ▼ ����� Decreases the sharpness adjustment value�• Thefunctionsthatcanbecontrolledwillvarydependingonthesignalbeinginputtotheprojector.(→page93)
SOURCESELECT:Thisswitchestheinputterminaloftheprojector.HDMI ��������������������� Switches to the HDMI IN terminal�DisplayPort ������������ Switches to the DisplayPort IN�BNC ����������������������� Switch to BNC video input�BNC(CV) ���������������� Switch to BNC (CV) video input�BNC(Y/C) ��������������� Switch to BNC (Y/C) video input�COMPUTER ����������� Switches to the COMPUTER IN terminal�HDBaseT ���������������� Switch to image input sent from a transmission device that supports HDBaseT�SLOT ���������������������� The projector switches to video input from the optional board when an optional board (sold separately) is
equipped on�
PROJECTORSTATUS:Thisdisplaystheconditionoftheprojector.LIGHT HOURS USED ����������Displays how many hours the light module has been used�ERROR STATUS ������������������Displays the status of errors occurring within the projector�
LOGOFF:Loggingoffyourprojectorandreturningtotheauthenticationscreen(LOGONscreen).
55
3. Convenient Features
NETWORK SETTINGS
•SETTINGS
WIRED
SETTING SetforwiredLAN.
APPLY ApplyyoursettingstowiredLAN.
PROFILE1/PROFILE2 TwosettingscanbesetforwiredLANconnection.SelectPROFILE1orPROFILE2.
DISABLE TurnoffwiredLANconnection
DHCPON AutomaticallyassignIPaddress,subnetmask,andgatewaytotheprojectorfromyourDHCPserver.
DHCPOFF SetIPaddress,subnetmask,andgatewaytotheprojectorassignedbyyournetworkadministrator.
IPADDRESS SetyourIPaddressofthenetworkconnectedtotheprojector.
SUBNETMASK Setyoursubnetmasknumberofthenetworkconnectedtotheprojector.
GATEWAY Setthedefaultgatewayofthenetworkconnectedtotheprojector.
AUTODNSON DHCPserverwillautomaticallyassign IPaddressofDNSserverconnected to theprojector.
AUTODNSOFF SetyourIPaddressofDNSserverconnectedtotheprojector.
56
3. Convenient Features
•NAME
PROJECTORNAME Enteranameforyourprojectorso thatyourcomputercan identify theprojector.Aprojectornamemustbe16charactersorless.TIP:Projectornamewillnotbeaffectedevenwhen[RESET]isdonefromthemenu.
HOSTNAME Enterthehostnameofthenetworkconnectedtotheprojector.Ahostnamemustbe15orless.
DOMAINNAME Enter thedomainnameof thenetworkconnectedtotheprojector.Adomainnamemustbe60charactersorless.
•ALERTMAIL
ALERTMAIL Thisoptionwillnotifyyourcomputeroferrormessagesviae-mailwhenusingwiredLAN.PlacingacheckmarkwillturnontheAlertMailfeature.ClearingacheckmarkwillturnofftheAlertMailfeature.Sampleofamessagetobesentfromtheprojector:Subject:[Projector]ProjectorInformationTHECOOLINGFANHASSTOPPED.[INFORMATION]PROJECTORNAME:PX803ULSeriesLIGHTHOURSUSED:0000[H]
SENDER’SADDRESS Entersender’saddress.
SMTPSERVERNAME EntertheSMTPservernametobeconnectedtotheprojector.
RECIPIENT’SADDRESS1,2,3
Enteryourrecipient’saddress.Uptothreeaddressescanbeentered.
TESTMAIL SendatestmailtocheckwhetheryoursettingsarecorrectornotNOTE:• Ifyouexecuteatest,youmaynotreceiveanAlertmail.Shouldthishappen,checkifnetwork
settings are correct.• Ifyouenteredanincorrectaddressinatest,youmaynotreceiveanAlertmail.Shouldthis
happen,checkiftheRecipient’sAddressiscorrect.
SAVE Clickthisbuttontosaveyoursettingstotheprojector’smemory.
57
3. Convenient Features
•NETWORKSERVICE
PJLinkPASSWORD SetapasswordforPJLink*.Apasswordmustbe32charactersorless.Donotforgetyourpassword.However,ifyouforgetyourpassword,consultwithyourdealer.
HTTPPASSWORD SetapasswordforHTTPserver.Apasswordmustbe10charactersorless.Whenapasswordissetup,youwillbepromptedforyourusername(arbitrary)andpasswordduringLOGON.
AMXBEACON TurnonorofffordetectionfromAMXDeviceDiscoverywhenconnectingtothenetworksupportedbyAMX’sNetLinxcontrolsystem.TIP:WhenusingadevicethatsupportsAMXDeviceDiscovery,allAMXNetLinxcontrolsystemwillrecognizethedeviceanddownloadtheappropriateDeviceDiscoveryModulefromanAMXserver.PlacingacheckmarkwillenabledetectingtheprojectorfromAMXDeviceDiscovery.ClearingacheckmarkwilldisabledetectingtheprojectorfromAMXDeviceDiscovery.
ExtronXTP SetforconnectingthisprojectortotheExtronXTPtransmitter.PlacingacheckmarkwillenabletoconnectwiththeXTPtransmitter.ClearingacheckmarkwilldisabletoconnectwiththeXTPtransmitter.
NOTE:Ifyouforgetyourpassword,contactyourdealer.
*WhatisPJLink?PJLinkisastandardizationofprotocolusedforcontrollingprojectorsofdifferentmanufacturers.ThisstandardprotocolisestablishedbyJapanBusinessMachineandInformationSystemIndustriesAssociation(JBMIA)in2005.TheprojectorsupportsallthecommandsofPJLinkClass1.SettingofPJLinkwillnotbeaffectedevenwhen[RESET]isdonefromthemenu.
CRESTRON
•ROOMVIEWformanagingfromthecomputer.
DISABLE DisablesROOMVIEW.
ENABLE EnablesROOMVIEW.
•CRESTRONCONTROLformanagingfromthecontroller.
DISABLE DisablesCRESTRONCONTROL.
ENABLE EnablesCRESTRONCONTROL.
IPADDRESS SetyourIPaddressofCRESTRONSERVER.
IPID SetyourIPIDofCRESTRONSERVER.
•INFORMATION
WIREDLAN DisplayalistofsettingsofwiredLANconnection.
UPDATE Reflectsettingswhentheyarechanged.
TIP:TheCRESTRONsettingsarerequiredonlyforusewithCRESTRONROOMVIEW.Formoreinformation,visithttp://www.crestron.com
58
3. Convenient Features
⓫ Storing Changes for Lens Shift, Zoom, and Focus [LENS MEMORY]TheadjustedvaluescanbestoredinprojectormemorywhenusingtheLENSSHIFT,ZOOMandFOCUSbuttonsoftheprojector.Adjustedvaluescanbeappliedtothesignalyouselected.Thiswilleliminatetheneedtoadjustlensshift,focus,andzoomatthetimeofsourceselection.Therearetwowaystosaveadjustedvaluesforlensshift,zoom,andfocus.
Functionname Description page
REF.LENSMEMORY Adjustedvaluescommontoallinputsignals.Atthetimeofinstallation,twokindsofadjustedvaluescanberecorded.Ifnoadjustedvaluesarestoredin[LENSMEMORY],adjustedvaluesfromtheselectedprofile([REF.LENSMEMORY])willbeappliedforlensadjustment.
→page118
LENSMEMORY Adjustedvaluesforeachinputsignal.Usetheadjustedvaluesforthesignalwithadifferentaspectratioorresolution.Theadjustedvaluescanbeappliedatthetimeofsourceselection.
→page101
NOTE:• ForusingthelensunitNP16FL,NP17ZL,NP18ZL,NP19ZL,NP20ZL,NP21ZL,andNP31ZL,besuretocarryout[LENSCALIBRA-
TION]afterreplacingthelensunit.(→ page 18, 118)• Forthelensunit,NP16FL,thestorablevalueas[LENSMEMORY]featureisfor[FOCUS]only.• The[LENSMEMORY]featureisnotavailableforthelensunit,NP39ML.
59
3. Convenient Features
To store your adjusted values in [REF. LENS MEMORY]:1. Press the MENU button.
Themenuwillbedisplayed.
2. Press the ▶buttontoselect[SETUP]andpresstheENTERbutton.
3. Press the ▶buttontoselect[INSTALLATION(2)].
4. Press the ▼buttontoselect[REF.LENSMEMORY]andpresstheENTERbutton.
The[REF.LENSMEMORY]screenwillbedisplayed.
5. Makesure[PROFILE]ishighlighted,thenpresstheENTERbutton.
The[PROFILE]selectionscreenappears.
6. Press the ▼/▲buttonstoselectthe[PROFILE]number,thenpresstheENTERbutton.
Returntothe[REF.LENSMEMORY]settingsscreen.
7. Select[STORE]andpresstheENTERbutton.
60
3. Convenient Features
Theconfirmationscreenwillbedisplayed.
8. Press the ◀buttontoselectand[YES]andpresstheENTERbutton.
Selecta[PROFILE]numberandsavetheadjusted[LENSSHIFT],[ZOOM],and[FOCUS]valuestoit.
• The[FORCEDMUTE]settingstopsprojectionduringlensshift.(→page118)
9. PresstheMENUbutton.
Themenuwillbeclosed.
TIP:• Tostoreadjustedvaluesforeachinputsource,usetheLensMemoryfunction.(→ page 101)
61
3. Convenient Features
To call up your adjusted values from [REF. LENS MEMORY]:1. Press the MENU button.
Themenuwillbedisplayed.
2. Press the ▶buttontoselect[SETUP]andpresstheENTERbutton.
3. Press the ▶buttontoselect[INSTALLATION(2)].
4. Press the ▼buttontoselect[REF.LENSMEMORY]andpresstheENTERbutton.
The[REF.LENSMEMORY]screenwillbedisplayed.
5. Makesure[PROFILE]ishighlighted,thenpresstheENTERbutton.
The[PROFILE]selectionscreenappears.
6. Press the ▼/▲buttonstoselectthe[PROFILE]number,thenpresstheENTERbutton.
Returntothe[REF.LENSMEMORY]settingsscreen.
7. Select[MOVE]andpresstheENTERbutton.
62
3. Convenient Features
Thelenswillshiftbasedontheadjustedvaluesstoredintheselected[PROFILE].
8. Press the ◀buttontoselectand[YES]andpresstheENTERbutton.
Theadjustedvalueswillbeappliedtothecurrentsignal..
9. PresstheMENUbutton.
Themenuwillbeclosed.
63
3. Convenient Features
TIP:Tocalluptheadjustedvaluesfrom[LENSMEMORY]:1. Fromthemenu,select[ADJUST]→[LENSMEMORY]→[MOVE]andpresstheENTERbutton.
Theconfirmationscreenwillbedisplayed.
2. Press the ◀buttontoselectand[YES]andpresstheENTERbutton.
Duringprojection,iftheadjustedvaluesforaninputsignalhavebeensaved,thelenswillshift.Ifnot,thelenswillshiftaccordingtotheadjustedvaluesstoredintheselected[REF.LENSMEMORY][PROFILE]number.
Toautomaticallyapplytheadjustedvaluesatthetimeofsourceselection:1. Fromthemenu,select[SETUP]→[REF.LENSMEMORY]→[LOADBYSIGNAL]andpresstheENTERbut-
ton.
2. Press the ▼buttontoselectand[ON]andpresstheENTERbutton.
Thiswillmovethelensautomaticallytothepositionatthetimeofsourceselectionaccordingtotheadjustedvalues.
NOTE:TheLensMemoryfunctionmaynotproduceacompletelyalignedimage(duetotolerancesinthelenses)usingtheadjustedvaluesstoredintheprojector.AftercallingupandapplyingtheadjustedvaluesfromtheLensMemoryfunction,finelyadjustthelensshift,zoomandfocustoproducethebestpossibleimage.
64
4. Multi-Screen Projection❶ Things that can be done using multi-screen projectionThisprojectorcanbeusedsinglyorarrangedinmultipleunitsformulti-screenprojection.Wewillintroduceanexampleusingtwoprojectionscreenshere.
Case 1Usingasingleprojectortoprojecttwotypesofvideosatthesametime[PIP/PICTUREBYPICTURE]
Case 2Usingfourprojectors(resolution:WUXGA)toprojectvideowitharesolutionof2560×1600pixels[TILING]
Case 1. Using a single projector to project two types of videos [PIP/PICTURE BY PICTURE]
Connection example and projection image
Inthecaseof[PICTUREBYPICTURE] Inthecaseof[PIP]
On-screen menu operationsDisplay[DISPLAY]→[PIP/PICTUREBYPICTURE]→[MODE]screenintheon-screenmenuandselect[PIP]or[PICTUREBYPICTURE].Fordetails,pleasereferto“4-2DisplayingTwoPicturesattheSameTime”.(→page68)
4. Multi-Screen Projection
65
Case 2. Using four projectors (resolution: WUXGA) to project videos with a resolution of 2560 × 1600 pixels [TILING]
Connection example and projection image
On-screen menu operations1 Foursimilarvideosaredisplayedwhenfourprojectorsareprojected.
Pleaserequestthedealertoadjusttheprojectionpositionofeachprojector.
4. Multi-Screen Projection
66
2 Operatetheon-screenmenuusingthefourrespectiveprojectorstodividetheimageintofourportions.
Display[DISPLAY]→[MULTISCREEN]→[PICTURESETTING]Screenintheon-screenmenuandselect[TIL-ING].
(1)Inthescreenforsettingthenumberofhorizontalunits,select[2UNITS].(numberofunitsinthehorizontaldirec-tion)
(2)Inthescreenforsettingthenumberofverticalunits,select[2UNITS].(numberofunitsintheverticaldirection)
(3)Inthescreenforsettingthehorizontalorder,select[1stUNIT]or[2ndUNIT].
(lookatthescreens,theoneontheleftisthe[1stUNIT]whiletheoneontherightisthe[2ndUNIT])
(4)Inthescreenforsettingtheverticalorder,selectthe[1stUNIT]orthe[2ndUNIT].
(lookatthescreens,theoneatthetopisthe[1stUNIT]whiletheoneatthebottomisthe[2ndUNIT])
3 Adjustthelensshiftofeachprojectortofine-tunetheboundariesofthescreen.
Forfurtherfine-tuning,adjustusing[DISPLAY]→[EDGEBLENDING]intheon-screenmenuforeachprojector.
Fordetails,pleasereferto“4-3DisplayingaPictureUsing[EDGEBLENDING]”.
(→page72)
4. Multi-Screen Projection
67
Things to note when installing projectors• Leave30cmoroverspacebetweeneachprojectorsandbetweentheintakeventandthewallforinstallingprojec-torssidebyside,sothatairintakeoftheprojectorsarenotobstructed.Whentheairintakeanddischargeoutletareobstructed,thetemperatureinsidetheprojectorwillriseandthismayresultinamalfunction.
30cmorgreater
• Twoprojectorscanbestackedontopofeachother(STACKsetting).(→page156)Donotattempttodirectlystackthreeormoreprojectors.Whentheprojectorsarepiledupontopofoneanother,theymayfalldown,resultingindamageandfailure.
• Installationexamplewhenusing3ormoreprojectors Thefollowinginstallationisrecommendedwheninstallingacombinationof3ormoreprojectorsformulti-screenprojection.[Installationexample]
ExhaustventIntakevent Cabinet
Airexhaust
Airintake
Back Back
WARNING
Pleaserequestthedealerforspecialinstallationservicessuchaswhenmountingtheprojectortotheceiling.Nevercarryouttheinstallationbyyourself.Theprojectormayfalldownandresultininjury.Pleaseuseasturdycabinetthatcanwithstandtheweightoftheprojectorfortheinstallation.Pleasedonotpileuptheprojectorsdirectlyontopofoneanother.
NOTE:• Fortherangeoftheprojectiondistance,pleaserefertotheAppendix“Throwdistanceandscreensize”.(→ page 171)
4. Multi-Screen Projection
68
❷ Displaying Two Pictures at the Same TimeTheprojectorhasafeaturethatallowsyoutoviewtwodifferentsignalssimultaneously.Youhavetwomodes:pictureinpicture(PIP)modeandpicturebypicture(PICTUREBYPICTURE)mode.Theprojectionvideointhefirstscreendisplayisknownasthemaindisplaywhiletheprojectionvideothatiscalledoutsubsequentlyisknownasthesub-display.Selecttheprojectionfunctionunder[DISPLAY]→[PIP/PICTUREBYPICTURE]→[MODE]intheon-screenmenu(thedefaultfactorysettingwhenshippedisPIP).(→page103)• Asinglescreenisprojectedwhenpoweristurnedon.
PictureinPicturefunction(PIP)Asmallsub-displayisdisplayedinsidethemaindisplay.
Thesub-displaycanbesetupandadjustedasfollows.(→page104)• Selectwhethertodisplaythesub-displayatthetopright,topleft,bottomrightorbottomleftofthescreen(thesizeofthesub-displaycanbeselectedandthepositioncanbefine-tuned)• Switchthemaindisplaywiththesub-display
Main Display
Sub-Display
Picturebypicturefunction(PICTUREBYPICTURE)Displaythemaindisplayandsub-displaysidebyside.
Themaindisplayandsub-displaycanbesetupandadjustedasfollows.(→ page104)• Selectingthedisplayboundary(ratio)ofthemaindisplayandsub-display• Switchthemaindisplayandsub-display
Main Display Sub-Display
Input terminals that can be used for the main screen and sub-screen.Themainscreenandsub-screencanprovidethefollowinginputterminals.• Themaindisplayandsub-displaysupportcomputersignalsuptoWUXGA@60HzRB.
Sub-Display or additional displayHDMI DisplayPort BNC BNC(CV) BNC(Y/C) COMPUTER HDBaseT SLOT
Main Display
HDMI No Yes Yes Yes Yes No NoDisplayPort Yes Yes Yes YesBNC Yes Yes
NoNo Yes Yes
BNC(CV) Yes Yes Yes Yes YesBNC(Y/C) Yes Yes Yes Yes YesCOMPUTER Yes Yes No Yes Yes No Yes YesHDBaseT No Yes Yes Yes Yes No NoSLOT No Yes Yes Yes Yes No No
NOTE:• Somesignalsmaynotappeardependingontheresolution.
4. Multi-Screen Projection
69
Projecting two screens1. PresstheMENUbuttontodisplaytheon-screenmenuandselect[DISPLAY]→[PIP/PICTUREBYPICTURE].
Thisdisplaysthe[PIP/PICTUREBYPICTURE]screenintheon-screenmenu.
2. Select[SUBINPUT]usingthe▼/▲ buttons, and press the ENTER button.
Thisdisplaysthe[SUBINPUT]screen.
3. Select the input signal using the ▼/▲ buttons, and press the ENTER button.
The[PIP](PICTUREINPICTURE)or[PICTUREBYPICTURE]screensetupunder[MODE]isprojected.(→page103)
• Whenthesignalnameisdisplayedingrey,thismeansthatitcannotbeselected.
• ThesignalcanalsobeselectedbypressingthePIP/FREEZEbuttonontheremotecontrol.
4. Press the MENU button.
Theon-screenmenuwilldisappear.
5. Whenreturningtosinglescreen,displaythe[PIP/PICTUREBYPICTUE]screenonemoretimeandselect[OFF]inthe[SUBINPUT]screenoftheStep3.
TIP:• Duringdual-screenprojection,iftheselectedinputisnotsupportedbythesub-screen,thesub-screenwillappearasablack
screen.
4. Multi-Screen Projection
70
Switching the main display with the sub-display and vice versa1. PresstheMENUbuttontodisplaytheon-screenmenuandselect[DISPLAY]→[PIP/PICTUREBYPICTURE].
Thisdisplaysthe[PIP/PICTUREBYPICTURE]screenintheon-screenmenu.
2. Select[PICTURESWAP]usingthe▼/▲ buttons and then press the ENTER button.
Displaythescreenforswitchingthedisplaypositions.
3. Select[ON]usingthe▼ button and then press the ENTER button.
Thevideoofthemaindisplaywillswitchwiththatofthesub-display.
Whenturned“OFF” Whenturned“ON”
Sub-displayvideo
Maindisplayvideo Sub-displayvideo
Maindisplayvideo
ThesignaloutputfromtheHDMIOUTterminaldoesnotchangeevenifthedisplaypositionsareswitched.
4. Press the menu button.
Theon-screenmenuwilldisappear.
4. Multi-Screen Projection
71
Restrictions
• Thefollowingoperationsareenabledonlyforthemaindisplay.
• Visualadjustments
• Videomagnification/demaginificationusingthepartialD-ZOOM/ZOOM+/−buttons.
However,magnification/demaginificationisuptotheboundarysetin[PICTUREBYPICTURE].
• TESTPATTERN
• Thefollowingoperationsareenabledforboththemaindisplayandsub-display.Theseoperationscannotbeap-pliedindividually.
• Momentarydeletionofvideo
• Videopause
• [PIP/PICTUREBYPICTURE]cannotbeusedwhena3Dvideoisbeingdisplayed.
• Whenusingthe[PIP/PICTUREBYPICTURE]function,[CLOSEDCAPTION]and[DYNAMICCONTRAST]canbeused.
• [PIP/PICTUREBYPICTURE]cannotbeusedwhenthesignalinputhasaresolutionof1920×1200ormore.
• TheHDMIOUTterminalhasarepeaterfunction.Theoutputresolutionislimitedbythemaximumresolutionoftheconnectedmonitorandprojector.
4. Multi-Screen Projection
72
❸ Displaying a Picture Using [EDGE BLENDING]Ahighresolutionvideocanbeprojectedonanevenbiggerscreenbycombiningmultipleprojectorsontheleft,right,topandbottom.Thisprojectorisequippedwithan“EDGEBLENDINGFunction”thatmakestheedges(boundaries)oftheprojectionscreenindistinguishable.
NOTE:• Forprojectorthrowdistances,referto“Throwdistanceandscreensize”onpage171.• BeforeperformingtheEdgeBlendingfunction,placetheprojectorinthecorrectpositionsothattheimagebecomessquarein
theappropriatesize,andthenmakeopticaladjustments(lensshift,focus,andzoom).• Adjustthebrightnessofeachprojectorusing[ADJUST]under[LIGHTMODE].Afteradjustingthebrightness,youcankeepthe
setbrightnesslevelbyturningONthe[CONSTANTBRIGHTNESS]mode.Inaddition,use[REF.WHITEBALANCE]toadjustthe[CONTRAST]and[BRIGHTNESS].
BeforeexplaininguseoftheEdgeBlendingfunctionThissectionexplainsthecasefor“Example:Placingtwoprojectorssidebyside”.Asshown,theprojectedimageontheleftisreferredtoas“ProjectorA”andtheprojectedimageontherightisreferredto“ProjectorB”.Unlessotherwisespecifiedhereinafter,the“projector”isusedtomeanbothAandB.
Example: Placing two projectors side by side
EdgeBlendingarea
Projectedarea Projectedarea
ProjectorA ProjectorB
4. Multi-Screen Projection
73
Preparation:• Turnontheprojectoranddisplayasignal.• Whenperformingsettingsoradjustmentsusingtheremotecontrol,enablethe[CONTROLID]soasnottoactivatetheotherprojectors.(→page125)
Setting the overlap of projection screens
①Enable[EDGEBLENDING].1. Press the MENU button.
Themenuwillbedisplayed.
2. Select[EDGEBLENDING].
The[EDGEBLENDING]screenwillbedisplayed.Alignthecursorwith[MODE]andthenpresstheENTERbutton.Themodescreenwillbedisplayed.
3. Select[MODE]→[ON]andpresstheENTERbutton.
ThisenablestheEdgeBlendingfunction.Thefollowingmenuitemsareavailable:
[TOP],[BOTTOM],[LEFT],[RIGHT],and[BLACKLEVEL]
4. Select[RIGHT]forProjectorAand[LEFT]forProjectorB.
PresstheENTERbutton.
Thefollowingitemsareavailable:
[CONTROL],[MARKER],[RANGE],and[POSITION]
4. Multi-Screen Projection
74
5. Select[CONTROL]→[ON]andpresstheENTERbutton.
Each[TOP],[BOTTOM],[LEFT],[RIGHT],and[BLACKLEVEL]hasitsown[CONTROL],[MARKER],[RANGE],and[POSITION].
• ForProjectorA,setthe[CONTROL]forthe[TOP],[LEFT]and[BOTTOM]to[OFF].SimilarlyforProjectorB,setthe[CONTROL]forthe[TOP],[RIGHT]and[BOTTOM]to[OFF].
②Adjust[RANGE]and[POSITION]todetermineanareaofoverlappededgesofimagesprojected from each projector.Turningon[MARKER]willdisplaymarkersinmagentaandgreen.Themagentamarkerisusedfor[RANGE]andgreenonefor[POSITION].
[RANGE](Determineanareaofoverlappededgesofimages.)
[POSITION](Determinethepositionofoverlappededgesofimages.)Greenmarker
Turnon[RIGHT]
Magentamarker
Turnon[LEFT]
Magentamarker
* The2screensareseparatedinthediagramforexplanatorypurposes.
4. Multi-Screen Projection
75
1 Adjust[RANGE].
Usethe◀or▶buttontoadjusttheoverlappedarea.
TIP:• Adjusttooverlaponeprojector’markerwiththeotherprojector’smarker.
2 Adjust[POSITION].
Usethe◀or▶buttontoalignoneedgewiththeotheredgeofoverlappedimages.
TIP:• Whendisplayingasignalwithadifferentresolution,performtheEdgeBlendingfunctionfromthestart.• Settingof[MARKER]willnotbesavedandreturnto[OFF]whentheprojectoristurnedoff.• Todisplayorhidethemarkerwhiletheprojectorisrunning,turnonoroff[MARKER]fromthemenu.
4. Multi-Screen Projection
76
Black Level AdjustmentThisadjuststheblackleveloftheoverlappingareaandthenon-overlappingareaofthemulti-screen(EDGEBLENDING).Adjustthebrightnesslevelifyoufeelthedifferenceistoolarge.
NOTE: Thisfunctionisenabledonlywhen[MODE]isturnedon.Adjustableareavariesdependingonwhatcombinationof[TOP],[BOTTOM],[LEFT]and[RIGHT]areturnedon.
Example:AdjustingtheBlackLevelwhenplacingtwoprojectorssidebyside
Widthofoverlap
Adjust[CENTER] Adjust[CENTER]
ProjectorA’simage
ProjectorB’simage
Adjust[CENTER-RIGHT] Adjust[CENTER-LEFT]
1. Turnon[MODE]
2. Select[BLACKLEVEL]andpresstheENTERbutton.
Thescreenwillswitchtotheblackleveladjustmentscreen.
3. Use the ▼ or ▲ button to select an item and use the ◀ or ▶ to adjust the black level.
Dothisfortheotherprojectorifnecessary.
4. Multi-Screen Projection
77
9-segmentedportionsforBlackLeveladjustmentThecenterprojector
Thisfunctionadjuststhebrightnesslevelof9-segmentedportionsforthecenterprojectorand4-segmentedportionsfortheleftbottomprojectorasshownbelow.
TOP-LEFT
BOTTOM-LEFT
CENTER-LEFT
TOP-RIGHT
CENTER-RIGHT
BOTTOM-RIGHT
TOP-CENTER
CENTER
CENTER
BOTTOM-CENTER
TOP-RIGHT
CENTER-RIGHT
TOP-CENTER
TIP:• Thenumberofblackleveldivisionscreens(maximumofninedivisions)changesdependingonthenumberofedgeblending
positionsselected(top,bottom,right,left).Inaddition,whenthetop/bottomandleft/rightendsareselected,thecornerdivisionscreen appears.
• Theedgeblendingwidthisthewidthsetintherangeandthecornerisformedbytheintersectingareaofthetop/bottomendsorleft/rightends.
• The[BLACKLEVEL]canbeadjustedtomakeitbrighteronly.
78
5. Using On-Screen Menu❶ Using the Menus
NOTE:Theon-screenmenumaynotbedisplayedcorrectlydependingoninputsignalandtheprojectorsetting.
1. Press the MENU button on the remote control or the projector cabinet to display the menu.
NOTE:Thecommandssuchas ENTER,EXIT,▲▼, ◀▶inthebottomshowavailablebuttonsforyouroperation.
2. Press the ◀▶ buttons on the remote control or the projector cabinet to display the submenu.
3. PresstheENTERbuttonontheremotecontrolortheprojectorcabinettohighlightthetopitemorthefirsttab.
4. Use the ▲▼ buttons on the remote control or the projector cabinet to select the item you want to adjust or set.
You can use the ◀▶ buttons on the remote control or the projector cabinet to select the tab you want.
5. Press the ENTER button on the remote control or the projector cabinet to display the submenu window.
6. Adjustthelevelorturntheselecteditemonoroffbyusingthe▲▼◀▶ buttons on the remote control or the projector cabinet.
Changesarestoreduntiladjustedagain.
7. Repeat steps 2-6 to adjust an additional item, or press the EXIT button on the remote control or the projec-tor cabinet to quit the menu display.
NOTE:Whenamenuormessageisdisplayed,severallinesofinformationmaybelost,dependingonthesignalorsettings.
8. Press the MENU button to close the menu.
To return to the previous menu, press the EXIT button.
79
5. Using On-Screen Menu
❷ Menu ElementsSlidebar
Solidtriangle
Menumode
Tab
Radiobutton
HIGHsymbol
LIGHTMODEsymbol
Menuwindowsordialogboxestypicallyhavethefollowingelements:
Highlight ����������������������������� Indicates the selected menu or item� Solid triangle ���������������������� Indicates further choices are available� A highlighted triangle indicates the item is active� Tab �������������������������������������� Indicates a group of features in a dialog box� Selecting on any tab brings its page to the front�Radio button �����������������������Use this round button to select an option in a dialog box�Source �������������������������������� Indicates the currently selected source�Menu mode ������������������������ Indicates the current menu mode: BASIC or ADVANCED�Off Timer remaining time ���� Indicates the remaining countdown time when the [OFF TIMER] is preset�Slide bar ����������������������������� Indicates settings or the direction of adjustment�LIGHT MODE symbol ���������� Indicates [LIGHT MODE] is set�Key Lock symbol ���������������� Indicates the [CONTROL PANEL LOCK] is enabled�Thermometer symbol ��������� Indicates the [LIGHT MODE] is forcibly set to [ECO] mode because the internal temperature is too
high�HIGH symbol ���������������������� Indicates the [FAN MODE] is set to [HIGH] mode�
Source
Availablebuttons
Thermometersymbol
KeyLocksymbol
OffTimerremainingtime
Highlight
80
5. Using On-Screen Menu
* Theasterisk(*)indicatesthatthedefaultsettingvariesdependingonthesignal.*1 The[GAMMACORRECTION]itemisavailablewhenanitemotherthan[DICOMSIM.]isselectedfor[REFERENCE].*2 The[SCREENSIZE]itemisavailablewhen[DICOMSIM.]isselectedfor[REFERENCE].*3 When[PRESENTATION]or[HIGH-BRIGHT]isselectedin[REFERENCE],the[COLORTEMPERATURE]isnotavailable.*4 The[INPUTRESOLLUTION]itemisavailablewheneitherCOMPUTERorBNCsignalisselectedastheinputterminal.
•Basicmenuitemsareindicatedbyshadedarea.❸ List of Menu ItemsSomemenuitemsarenotavailabledependingontheinputsource.Menu Item Default Options
INPUT
HDMI *DisplayPort *BNC *BNC(CV) *BNC(Y/C) *COMPUTER *HDBaseTSLOTENTRY LISTTEST PATTERN
ADJUST
PICTURE
MODE STANDARD STANDARD, PROFESSIONAL
PRESET * HIGH-BRIGHT, PRESENTATION, VIDEO, MOVIE, GRAPHIC, sRGB, DICOM SIM�, EDGE BLENDING
DETAIL SETTINGS
GENERAL
REFERENCE * HIGH-BRIGHT, PRESENTATION, VIDEO, MOVIE, GRAPHIC, sRGB, DICOM SIM�, EDGE BLENDING
GAMMA CORRECTION*1
SELECT DYNAMIC, NATURAL, BLACK DETAILREFERENCE
SCREEN SIZE*2 * LARGE, MEDIUM, SMALLCOLOR TEMPERATURE*3 *DYNAMIC CONTRAST * OFF, ONBrilliant Color * OFF, MEDIUM, HIGH
WHITE BALANCECONTRAST R 0CONTRAST G 0CONTRAST B 0BRIGHTNESS R 0BRIGHTNESS G 0BRIGHTNESS B 0
COLOR CORRECTION
RED HUE 0SATURATION
GREEN HUE 0SATURATION
BLUE HUE 0SATURATION
YELLOW HUE 0SATURATION
MAGENTA HUE 0SATURATION
CYAN HUE 0SATURATIONCONTRAST 0BRIGHTNESS 0SHARPNESS 0COLOR 0HUE 0RESET
IMAGE OPTIONS
CLOCK *PHASE *HORIZONTAL *VERTICAL *BLANKING * TOP, BOTTOM, LEFT, RIGHTOVERSCAN AUTO AUTO, 0[%], 5[%], 10[%]
ASPECT RATIO
AUTO (COMPUTER) AUTO, 4:3, 5:4, 16:9, 15:9, 16:10, FULL, NATIVE
AUTO (COMPONENT/VIDEO/S-VIDEO) AUTO, 4:3, LETTERBOX, WIDE SCREEN, ZOOM
AUTO (COMPONENT/VIDEO/S-VIDEO) AUTO, 4:3 WINDOW, LETTERBOX, WIDE SCREEN, FULL
INPUT RESOLUTION*4 * –
81
5. Using On-Screen Menu
Menu Item Default Options
ADJUST
VIDEO
NOISE REDUCTIONRANDOM NR OFF OFF, LOW, MEDIUM, HIGHMOSQUITO NR OFF OFF, LOW, MEDIUM, HIGHBLOCK NR OFF OFF, LOW
DEINTERLACE NORMAL NORMAL, MOVIE, STILLCONTRAST ENHANCEMENT
MODE AUTO OFF, AUTO, NORMALGAIN
SIGNAL TYPE AUTO AUTO, RGB, COMPONENTVIDEO LEVEL AUTO AUTO, NORMAL, ENHANCED, SUPER WHITE
3D SETTINGS FORMAT AUTOAUTO, OFF(2D), FRAME PACKING, SIDE BY SIDE(HALF), SIDE BY SIDE(FULL), TOP AND BOTTOM, FRAME ALTERNATIVE, LINE ALTERNATIVE
L/R INVERT OFF OFF, ON
LENS MEMORY
STOREMOVERESET
DISPLAY
PIP/PICTURE BY PICTURE
SUB INPUT OFF, HDMI, DisplayPort, BNC, BNC(CV), BNC(Y/C), COMPUTER, HDBaseT, SLOT
MODE PIP PIP, PICTURE BY PICTUREPICTURE SWAP OFF OFF, ON
PIP SETTING
START POSITION TOP-LEFT TOP-LEFT, TOP-RIGHT, BOTTOM-LEFT, BOTTOM-RIGHTHORIZONTAL POSITIONVERTICAL POSITIONSIZE MEDIUM LARGE, MEDIUM, SMALL
BORDER
GEOMETRIC CORRECTION
KEYSTONE
HORIZONTALVERTICALTILTTHROW RATIO
CORNERSTONE TOP-LEFT, TOP, TOP-RIGHT, LEFT, RIGHT, BOTTOM-LEFT, BOTTOM, BOTTOM-RIGHT
HORIZONTAL CORNER TOP-LEFT, TOP, TOP-RIGHT, LEFT, RIGHT, BOTTOM-LEFT, BOTTOM, BOTTOM-RIGHT
VERTICAL CORNER TOP-LEFT, TOP, TOP-RIGHT, LEFT, RIGHT, BOTTOM-LEFT, BOTTOM, BOTTOM-RIGHT
PINCUSHION
TOPBOTTOMLEFTRIGHT
PC TOOL OFF OFF, 1, 2, 3RESET
EDGE BLENDING
MODE OFF OFF, ON
TOP
CONTROL ON OFF, ONMARKER ON OFF, ONRANGEPOSITION
BOTTOM
CONTROL ON OFF, ONMARKER ON OFF, ONRANGEPOSITION
LEFT
CONTROL ON OFF, ONMARKER ON OFF, ONRANGEPOSITION
RIGHT
CONTROL ON OFF, ONMARKER ON OFF, ONRANGEPOSITION
BLACK LEVEL
TOP-LEFTTOP-CENTERTOP-RIGHTCENTER-LEFTCENTERCENTER-RIGHTBOTTOM-LEFTBOTTOM-CENTERBOTTOM-RIGHT
82
5. Using On-Screen Menu
Menu Item Default Options
DISPLAY MULTI SCREEN
WHITE BALANCE
MODE OFF OFF, ONCONTRAST WCONTRAST RCONTRAST GCONTRAST BBRIGHTNESS WBRIGHTNESS RBRIGHTNESS GBRIGHTNESS B
PICTURE SETTING
MODE OFF OFF, ZOOM, TILING
ZOOM
HORIZONTAL ZOOMVERTICAL ZOOMHORIZONTAL POSITIONVERTICAL POSITION
TILING
WIDTH 1 UNIT, 2 UNITS, 3 UNITS, 4 UNITSHEIGHT 1 UNIT, 2 UNITS, 3 UNITS, 4 UNITSHORIZONTAL POSITION 1st UNIT, 2nd UNIT, 3rd UNIT, 4th UNITVERTICAL POSITION 1st UNIT, 2nd UNIT, 3rd UNIT, 4th UNIT
SETUP
MENU
LANGUAGE ENGLISH
ENGLISH, DEUTSCH, FRANÇAIS, ITALIANO, ESPAÑOL, SVENSKA, 日本語DANSK, PORTUGUÊS, ČEŠTINA, MAGYAR, POLSKI, NEDERLANDS, SUOMINORSK, TÜRKÇE, РУССКИЙ, , Ελληνικά, 中文, 한국어ROMÂNĂ, HRVATSKA, БЪЛГАРСКИ, INDONESIA, हिन्दी, ไทย,
, 繁體中文COLOR SELECT COLOR COLOR, MONOCHROMEINPUT DISPLAY ON OFF, ONMESSAGE DISPLAY ON OFF, ONID DISPLAY ON OFF, ON3D CAUTION MESSAGE ON OFF, ON
DISPLAY TIME AUTO 45 SEC MANUAL, AUTO 5 SEC, AUTO 15 SEC, AUTO 45 SEC
INSTALLA-TION(1)
ORIENTATION AUTO AUTO, DESKTOP FRONT, CEILING REAR, DESKTOP REAR, CEILING FRONT
SCREEN TYPE FREE FREE, 4:3 SCREEN, 16:9 SCREEN, 16:10 SCREEN
WALL COLOR OFF OFF, BLACKBOARD, BLACKBOARD (GRAY), LIGHT YELLOW, LIGHT GREEN, LIGHT BLUE, SKY BLUE, LIGHT ROSE, PINK
FAN MODE AUTO AUTO, HIGH
LIGHT MODELIGHT MODE NORMAL NORMAL, ECO1, ECO2CONSTANT BRIGHTNESS OFF OFF, ONADJUST 20–100%
REF� WHITE BALANCE
CONTRAST RCONTRAST GCONTRAST BBRIGHTNESS RBRIGHTNESS GBRIGHTNESS B
3D GLASSES DLP® Link DLP® Link, OTHERS
INSTALLA-TION(2)
SHUTTER SETTINGS
POWER ON SHUTTER OPEN OPEN, CLOSEPICTURE MUTE SHUTTER OPEN OPEN, CLOSEFADE IN TIME 0–10 sec�FADE OUT TIME 0–10 sec�
REF� LENS MEMORY
PROFILE 1 1, 2STOREMOVERESETLOAD BY SIGNAL OFF ON, OFFFORCED MUTE OFF ON, OFF
LENS CALIBRATION
LENS POSITION HOMETYPE NP39ML
83
5. Using On-Screen Menu
Menu Item Default Options
SETUP CONTROL
TOOLS
ADMINISTRA-TOR MODE
MENU MODE ADVANCED ADVANCED, BASICNOT SAVE SETTING VALUES OFF OFF, ONNEW PASSWORDCONFIRM PASSWORD
PROGRAM TIMER
ENABLE OFF OFF, ON
SETTINGS
EDIT
ACTIVE OFF, ON
DAY SUN, MON, TUE, WED, THU, FRI, SAT, MON-FRI, MON-SAT, EVERY DAY
TIMEFUNCTION POWER, INPUT, LIGHT MODEADVANCED SETTINGSPOWER OFF OFF, ON
INPUT HDMI HDMI, DisplayPort, BNC, BNC(CV), BNC(Y/C), COMPUTER, HDBaseT, SLOT
LIGHT MODE NORMAL NORMAL, ECO1, ECO2REPEAT OFF OFF, ON
DELETEUPDOWNBACK
DATE AND TIME SETTINGS
TIME ZONE SETTIMGS
GMT
-12:00, -11:30, -11:00, -10:30, -10:00, -09:30, -09:00, -08:30, -08:00, -07:30, -07:00, -06:30, -06:00, -05:30, -05:00, -04:30, -04:00, -03:30, -03:00, -02:30, -02:00, -01:30, -01:00, -00:30, 00:00, +00:30, +01:00, +01:30, +02:00, +02:30, +03:00, +03:30, +04:00, +04;30, +05:00, +05:30, +06:00, +06:30, +07:00, +07:30, +08:00, +08:30, +09:00, +09:30, +10:00, +10:30, +11:00, +11:30, +12:00, +12:30, +13:00
DATE AND TIME SETTINGS
DATE MM/DD/YYYYTIME HH:MMINTERNET TIME SERVER OFF OFF, ON
IP ADDRESSUPDATE
SUMMER TIME SETTINGS
ENABLE OFF OFF, ONMON(START) 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
DAY(START) FIRST, SECOND, THIRD, FOURTH, LASTSUN, MON, TUE, WED, THU, FRI, SAT
TIME(START)MON(EXIT) 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
DAY(EXIT)FIRST WEEK, SECOND WEEK, THIRD WEEK, FOURTH WEEK, LAST WEEKSUN, MON, TUE, WED, THU, FRI, SAT
TIME(EXIT)TIME DIFFERENCE +01:00, +00:30, -00:30, -01:00
MOUSE (Note) Cannot be used for this device�CONTROL PANEL LOCK OFF OFF, ONSECURITY OFF OFF, ONCOMMUNICATION SPEED 38400bps 4800bps, 9600bps, 19200bps, 38400bps, 115200bps
CONTROL ID CONTROL ID NUMBER 1 1–254CONTROL ID OFF OFF, ON
REMOTE SENSOR FRONT/BACK FRONT/BACK, FRONT, BACK, HDBase-T
84
5. Using On-Screen Menu
Menu Item Default Options
SETUP
NETWORK SETTINGS
WIRED LAN
PROFILES DISABLE, PROFILE 1, PROFILE 2DHCP OFF, ONIP ADDRESS 192�168�0�10SUBNET MASK 255�255�255�0GATEWAY 192�168�0�1AUTO DNS OFF, ONDNS CONFIGURATIONRECONNECT
PROJECTOR NAME PROJECTOR NAME PX803UL Series
DOMAIN HOST NAME necpjDOMAIN NAME
ALERT MAIL
ALERT MAIL OFF, ONHOST NAMEDOMAIN NAMESENDER'S ADDRESSSMTP SERVER NAMERECIPIENT'S ADDRESS 1RECIPIENT'S ADDRESS 2RECIPIENT'S ADDRESS 3TEST MAIL
NETWORK SERVICE
HTTP SERVER
NEW PASSWORDCONFIRM PASSWORD
PJLink NEW PASSWORDCONFIRM PASSWORD
AMX BEACON OFF, ON
CRESTRON
ROOMVIEW OFF, ONCRESTRON CONTROL (ENABLE, CONTROLLER IP ADDRESS, IP ID)
Extron XTP OFF, ON
SOURCE OPTIONS
AUTO ADJUST NORMAL OFF, NORMAL, FINE
COLOR SYSTEM BNC(VIDEO) AUTO AUTO, NTSC3�58, NTSC4�43, PAL, PAL-M, PAL-N, PAL60, SECAMBNC(Y/C) AUTO AUTO, NTSC3�58, NTSC4�43, PAL, PAL-M, PAL-N, PAL60, SECAM
DEFAULT INPUT SELECT LAST LAST, AUTO, HDMI, DisplayPort, BNC, BNC(CV), BNC(Y/C), COMPUTER, HDBaseT, SLOT
CLOSED CAPTION OFF OFF, CAPTION1, CAPTION2, CAPTION3, CAPTION4, TEXT1, TEXT2, TEXT3, TEXT4
BACKGROUND BLUE BLUE, BLACK, LOGO
POWER OPTIONS
STANDBY MODE NORMAL NORMAL, NETWORK STANDBYDIRECT POWER ON OFF OFF, ONAUTO POWER ON SELECT OFF OFF, HDMI, DisplayPort, COMPUTER, HDBaseT, SLOTAUTO POWER OFF 1:00 OFF, 0:05, 0:10, 0:15, 0:20, 0:30, 1:00OFF TIMER OFF OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00
SLOT POWER PROJECTOR ON ON OFF, ONPROJECTOR STANDBY ENABLE DISABLE, ENABLE
RESETCURRENT SIGNALALL DATAALL DATA (INCLUDING ENTRY LIST)
85
5. Using On-Screen Menu
Menu Item Default Options
INFO�
USAGE TIME LIGHT HOURS USEDTOTAL CARBON SAVINGS
SOURCE(1)
INPUT TERMINALRESOLUTIONHORIZONTAL FREQUENCYVERTICAL FREQUENCYSYNC TYPESYNC POLARITYSCAN TYPESOURCE NAMEENTRY NO�
SOURCE(2)
SIGNAL TYPEVIDEO TYPEBIT DEPTHVIDEO LEVELLINK RATELINK LANE3D FORMAT
SOURCE(3)
INPUT TERMINALRESOLUTIONHORIZONTAL FREQUENCYVERTICAL FREQUENCYSYNC TYPESYNC POLARITYSCAN TYPESOURCE NAMEENTRY NO�
SOURCE(4)
SIGNAL TYPEVIDEO TYPEBIT DEPTHVIDEO LEVELLINK RATELINK LANE3D FORMAT
WIRED LAN
IP ADDRESSSUBNET MASKGATEWAYMAC ADDRESS
VERSION(1)FIRMWAREDATASUB-CPU
OTHERS
DATE TIMEPROJECTOR NAMEMODEL NO�SERIAL NUMBERCONTROL ID (when [CONTROL ID] is set)
HDBaseT
SIGNAL QUALITYOPERATION MODELINK STATUSHDMI STATUS
86
5. Using On-Screen Menu
❹ Menu Descriptions & Functions [INPUT]
HDMIThisprojectsthevideoofthedeviceconnectedtotheHDMIINterminal.
DisplayPortThisprojectsthevideoofthedeviceconnectedtotheDisplayPortINterminal.
BNCThisprojectsthevideoofthedeviceconnectedtothevideoinputterminal.(ThisprojectstheanalogRGBsignalorcomponentsignal.)
BNC(CV)ThisprojectsthevideoofthedeviceconnectedtotheBNC(CV)videoinputterminal.(Thisprojectsthecompositevideosignal.)
BNC(Y/C)ThisprojectsthevideoofthedeviceconnectedtotheBNC(Y/C)videoinputterminal.(ThisprojectstheS-videosignal.)
COMPUTERThisprojectsthevideoofthedeviceconnectedtotheCOMPUTERINterminal.(ThisprojectstheanalogRGBsignalorcomponentsignal.)
HDBaseTProjectingtheHDBaseTorWIREDLANsignal.
SLOTProjectsthepictureviatheoptionalboard(soldseparately)insertedintotheSLOT.
ENTRY LISTDisplaysalistofsignals.Seethefollowingpages.
TEST PATTERNClosesthemenuandswitchestothetestpatternscreen.Selectthepatternusingthe◀▶buttons.
87
5. Using On-Screen Menu
Using the Entry ListWhenanysourceadjustmentsaremade,theadjustmentsareautomaticallyregisteredintheEntryList.The(adjust-mentvaluesof)registeredsignalscanbeloadedfromtheEntryListwhenevernecessary.Upto100patternscanberegisteredintheEntryList.When100patternshavebeenregisteredintheEntryList,anerrormessageisthendisplayedandnoadditionalpatternscanberegistered.Youshouldthusdelete(adjustmentvaluesof)signalsthatarenolongerneeded.
Displaying the Entry list1. Press the MENU button.
Themenuwillbedisplayed.
2. Press the ◀ or ▶buttontoselect[INPUT].
TheINPUTlistwillbedisplayed.
3. Use the ◀, ▶, ▲, or ▼toselect[ENTRYLIST]andpresstheENTERbutton.
TheENTRYLISTwindowswillbedisplayed.
IftheENTRYLISTwindowisnotdisplayed,switchthemenuto[ADVANCED].
Toswitchthemenubetween[ADVANCED]and[BASIC],select[SETUP]→[CONTROL]→[TOOLS]→[ADMIN-ISTRATORMODE]→[MENUMODE].(→page119)
88
5. Using On-Screen Menu
EnteringthecurrentlyprojectedsignalintotheEntryList[STORE]
1. Press the ▲ or ▼ button to select any number.
2. Press the ◀ or ▶buttontoselect[STORE]andpresstheENTERbutton.
CallingupasignalfromtheEntryList[LOAD]Pressthe▲ or ▼buttontoselectasignalandpresstheENTERbutton.
EditingasignalfromtheEntryList[EDIT]
1. Press the ▲ or ▼ button to select a signal you wish to edit.
2. Press the ◀, ▶, ▲, or ▼buttontoselect[EDIT]andpresstheENTERbutton.
TheEditwindowwillbedisplayed.
SOURCENAME Enterasignalname.Upto18alphanumericcharacterscanbeused.INPUT Theinputterminalcanbechanged.SwitchingbetweenHDMI/DisplayPort/BNC/BNC(CV)/
BNC(Y/C)/Computer/HDBaseT/SLOTispossible.LOCK Setso that theselectedsignalcannotbedeletedwhen [ALLDELETE] isexecuted.The
changesmadeafterLOCKexecutioncannotbesaved.SKIP Setsothattheselectedsignalwillbeskippedduringautosearch.
3. Settheaboveitemsandselect[OK]andpresstheENTERbutton.
NOTE:Theinputterminalcannotbechangedtothecurrentlyprojectedsignal.
89
5. Using On-Screen Menu
CuttingasignalfromtheEntryList[CUT]
1. Press the ▲ or ▼ button to select a signal you wish to delete.
2. Press the ◀, ▶, ▲, or ▼buttontoselect[CUT]andpresstheENTERbutton.
ThesignalwillbedeletedfromtheEntryListandthedeletedsignalwillbedisplayedontheclipboardatthebottomoftheEntryList.
NOTE:• Thecurrentlyprojectedsignalcannotbedeleted.• Whenthelockedsignalisselected,itwillbedisplayedingraywhichindicatesitisnotavailable.
TIP:• DataontheclipboardcanbepassedontotheEntryList.• DataontheclipboardwillnotbelostaftertheEntryListisclosed.
CopyingandpastingasignalfromtheEntryList[COPY]/[PASTE]
1. Press the ▲ or ▼ button to select a signal you wish to copy.
2. Press the ◀, ▶, ▲, or ▼buttontoselect[COPY]andpresstheENTERbutton.
ThecopiedsignalwillbedisplayedontheclipboardatthebottomoftheEntryList.
3. Press the ◀ or ▶ button to move to the list.
4. Press the ▲ or ▼ button to select a signal.
5. Press the ◀, ▶, ▲, or ▼buttontoselect[PASTE]andpresstheENTERbutton.
Dataontheclipboardwillbepastedtothesignal.
DeletingallthesignalsfromtheEntryList[ALLDELTE]
1. Press the ◀, ▶, ▲, or ▼buttontoselect[ALLDELETE]andpresstheENTERbutton.
Theconfirmationmessagewillbedisplayed.
2. Press the ◀ or ▶buttontoselect[YES]andpresstheENTERbutton.
NOTE: The locked signal cannot be deleted.
90
5. Using On-Screen Menu
❺ Menu Descriptions & Functions [ADJUST][PICTURE]
[MODE]Thisfunctionallowsyoutodeterminehowtosavesettingsfor[DETAILSETTINGS]of[PRESET]foreachinput.
STANDARD ������������ Saves settings for each item of [PRESET] (Preset 1 through 8)PROFESSIONAL ����� Saves all the settings of [PICTURE] for each input�
NOTE: • When[TESTPATTERN]isdisplayed,[MODE]cannotbeselected.
[PRESET]Thisfunctionallowsyoutoselectoptimizedsettingsforyourprojectedimage.Youcanadjustneutraltintforyellow,cyanormagenta.Thereareeightfactorypresetsoptimizedforvarioustypesofimages.Youcanalsouse[DETAILSETTINGS]tosetuseradjustablesettingstocustomizeeachgammaorcolor.Yoursettingscanbestoredin[PRESET1]to[PRESET8].
HIGH-BRIGHT �������� Recommended for use in a brightly lit room�PRESENTATION ����� Recommended for making a presentation using a PowerPoint file�VIDEO �������������������� Recommended for typical TV program viewing�MOVIE ������������������� Recommended for movies�GRAPHIC ��������������� Recommended for graphics�sRGB ��������������������� Standard color valuesDICOM SIM� ���������� Recommended for DICOM simulation format�EDGE BLENDING ��� Recommended for edge blending�
NOTE: • The[DICOMSIM.]optionisfortraining/referenceonlyandshouldnotbeusedforactualdiagnosis.• DICOMstandsforDigitalImagingandCommunicationsinMedicine.ItisastandarddevelopedbytheAmericanCollegeofRadiol-
ogy(ACR)andtheNationalElectricalManufacturersAssociation(NEMA). Thestandardspecifieshowdigitalimagedatacanbemovedfromsystemtosystem.• Adjustmentmaynotworkdependingoninputsignal.
91
5. Using On-Screen Menu
[DETAILSETTINGS]
[GENERAL]StoringYourCustomizedSettings[REFERENCE]Thisfunctionallowsyoutostoreyourcustomizedsettingsin[PRESET1]to[PRESET8].First,selectabasepresetmodefrom[REFERENCE],thenset[GAMMACORRECTION]and[COLORTEMPERATURE].
HIGH-BRIGHT �������� Recommended for use in a brightly lit room�PRESENTATION ����� Recommended for making a presentation using a PowerPoint file�VIDEO �������������������� Recommended for typical TV program viewing�MOVIE ������������������� Recommended for movies�GRAPHIC ��������������� Recommended for graphics�sRGB ��������������������� Standard color values�DICOM SIM� ���������� Recommended for DICOM simulation format�EDGE BLENDING ��� Recommended for edge blending�
SelectingGammaCorrectionMode[GAMMACORRECTION]Eachmodein[SELECT]correctscolortoneofprojectedimageandisrecommendedfor:
DYNAMIC �������������� Creates a high-contrast picture�NATURAL ��������������� Natural reproduction of the picture�BLACK DETAIL ������� Emphasizes detail in dark areas of the picture�
In[REFERENCE],itadjustscorrectedvalueforprojectedimage.Highervaluemeansdeepercorrection.
NOTE:Thisfunctionisnotavailablewhen[DICOMSIM.]isselectedfor[DETAILSETTINGS].
92
5. Using On-Screen Menu
SelectingScreenSizeforDICOMSIM[SCREENSIZE]Thisfunctionwillperformgammacorrectionappropriateforthescreensize.
LARGE ������������������� For screen size of 150"MEDIUM ���������������� For screen size of 100"SMALL ������������������� For screen size of 50"
NOTE: • Thisfunctionisavailableonlywhen[DICOMSIM.]isselectedfor[DETAILSETTINGS].• Correctionvalueischangeddependingonprojectionimages.
AdjustingColorTemperature[COLORTEMPERATURE]Thisoptionallowsyoutoselectthecolortemperatureofyourchoice.Avaluebetween5000Kand10500Kcanbesetina500Kunit.
NOTE: • When[HIGH-BRIGHT]isselectedin[REFERENCE],thisfunctionisnotavailable.• When[PRESENTATION]isselectedin[REFERENCE],theselectablerangefor[COLORTEMPERATURE]is3levels,0,1,and3.
AdjustingBrightnessandContrast[DYNAMICCONTRAST]If[ON]isselected,themostoptimalcontrastratioisusedaccordingtothepicture.
NOTE:• Dependingontheconditions,projectorsettingssuchas[DYNAMICCONTRAST]maynotbeabletobeselected.
[BrilliantColor]Selectsthebrightnessofthecolorwhite.Selectingoptionsfrom[MEDIUM]to[HIGH]increasesthebrightnessofthecolorwhite.
NOTE:• Ifunder[REFERENCE],[HIGH-BRIGHT]or[PRESENTATION]areselected,[BrilliantColor]cannotbechanged.
AdjustingWhiteBalance[WHITEBALANCE]Thisallowsyoutoadjustthewhitebalance.Contrastforeachcolor(RGB)toadjustthewhitelevelofthescreen;Brightnessforeachcolor(RGB)isusedtoadjusttheblacklevelofthescreen.
[COLORCORRECTION]Correctsthecolorforallsignals.Adjuststhetoneforthecolorsred,green,blue,yellow,magentaandcyan.
RED HUE +Direction Magentadirection−Direction Yellowdirection
SATURATION +Direction Vivid−Direction Weak
GREEN HUE +Direction Yellowdirection−Direction Cyandirection
SATURATION +Direction Vivid−Direction Weak
BLUE HUE +Direction Cyandirection−Direction Magentadirection
SATURATION +Direction Vivid−Direction Weak
YELLOW HUE +Direction Reddirection−Direction Greendirection
SATURATION +Direction Vivid−Direction Weak
93
5. Using On-Screen Menu
MAGENTA HUE +Direction Bluedirection−Direction Reddirection
SATURATION +Direction Vivid−Direction Weak
CYAN HUE +Direction Greendirection−Direction Bluedirection
SATURATION +Direction Vivid−Direction Weak
[CONTRAST]Adjuststheintensityoftheimageaccordingtotheincomingsignal.
[BRIGHTNESS]Adjuststhebrightnesslevelorthebackrasterintensity.
[SHARPNESS]Controlsthedetailoftheimage.
[COLOR]Increasesordecreasesthecolorsaturationlevel.
[HUE]Variesthecolorlevelfrom+/−greento+/−blue.Theredlevelisusedasreference.
Inputsignal CONTRAST BRIGHTNESS SHARPNESS COLOR HUE
RGBsystemof“COMPUTER/DisplayPort/HDMI/HDBaseT”
Yes Yes Yes No No
COMPONENTsystemof“COMPUTER/DisplayPort/HDMI/HDBaseT”
Yes Yes Yes Yes Yes
CompositeVideo/S-Video Yes Yes Yes Yes Yes
Yes=Adjustable,No=Notadjustable
NOTE:• When[TESTPATTERN]isdisplayed,[CONTRAST],[BRIGHTNESS],[SHARPNESS],[COLOR]and[HUE]cannotbeadjusted.
[RESET]Thesettingsandadjustmentsfor[PICTURE]willbereturnedtothefactorysettingswiththeexceptionofthefollowing;Presetnumbersand[REFERENCE]withinthe[PRESET]screen.Thesettingsandadjustmentsunder[DETAILSETTINGS]withinthe[PRESET]screenthatarenotcurrentlyselectedwillnotbereset.
94
5. Using On-Screen Menu
[IMAGE OPTIONS]
AdjustingClockandPhase[CLOCK/PHASE]ThisallowsyoutomanuallyadjustCLOCKandPHASE.
CLOCK ������������������� Use this item to fine tune the computer image or to remove any vertical banding that might appear� This function adjusts the clock frequencies that eliminate the horizontal banding in the image�This adjustment may be necessary when you connect your computer for the first time�
PHASE ������������������� Use this item to adjust the clock phase or to reduce video noise, dot interference or cross talk� (This is evident when part of your image appears to be shimmering�)Use [PHASE] only after the [CLOCK] is complete�
NOTE:The[CLOCK]and[PHASE]itemsareavailableforRGBsignalsonly.
95
5. Using On-Screen Menu
AdjustingHorizontal/VerticalPosition[HORIZONTAL/VERTICAL]Adjuststheimagelocationhorizontallyandvertically.
• Animagecanbedistortedduringtheadjustmentof[CLOCK]and[PHASE].Thisisnotmalfunction.
• Theadjustments for [CLOCK], [PHASE], [HORIZONTAL],and[VERTICAL]willbestored inmemoryfor thecurrentsignal.Thenexttimeyouprojectthesignalwiththesameresolution,horizontalandverticalfrequency,itsadjustmentswillbecalledupandapplied.
Todeleteadjustmentsstoredinmemory,fromthemenu,youselect[RESET]→[CURRENTSIGNAL]andresettheadjustments.
[BLANKING]Adjuststhedisplayrange(blanking)atthetop,bottom,leftandrightedgesoftheinputsignal.
SelectingOverscanPercentage[OVERSCAN]Selectoverscanpercentage(Auto,0%,5%and10%)forsignal.
Projectedimage
Overscanedby10%
NOTE: • The[OVERSCAN]itemisnotavailable: -when[NATIVE]isselectedfor[ASPECTRATIO].
96
5. Using On-Screen Menu
SelectingtheAspectRatio[ASPECTRATIO]Usethisfunctiontoselectthescreen’svertical:horizontalaspectratio.Selectthescreentype(4:3screen,16:9screenor16:10screen)inthe[INSTALLATION(1)]beforesettingtheaspectratio.(→page115)Theprojectorautomaticallyidentifiesthesignalbeinginputandsetstheoptimumaspectratio.
For Computer signal
ForComponent/Video/S-Videosignals
Whenthescreentypeissetto4:3 Whenthescreentypeissetto16:9or16:10
Resolution AspectRatioVGA 640×480 4:3SVGA 800×600 4:3XGA 1024×768 4:3WXGA 1280×768 15:9WXGA 1280×800 16:10HD(FWXGA) 1366×768 approx.16:9WXGA+ 1440×900 16:10SXGA 1280×1024 5:4SXGA+ 1400×1050 4:3WXGA++ 1600×900 16:9UXGA 1600×1200 4:3WSXGA+ 1680×1050 16:10FHD(1080P) 1920×1080 16:9WUXGA 1920×1200 16:10WQXGA 2560×1600 16:10
Options Function
AUTO Theprojectorwillautomaticallydeterminetheincomingsignalanddisplayitinitsaspectratio.Theprojectormayerroneouslydeterminetheaspectratiodependingonitssignal.Ifthisoccurs,selecttheappropriateaspectratiofromthefollowing.
4:3 Theimageisdisplayedin4:3aspectratio.
5:4 Theimageisdisplayedin5:4aspectratio
16:9 Theimageisdisplayedin16:9aspectratio
15:9 Theimageisdisplayedin15:9aspectratio
16:10 Theimageisdisplayedin16:10aspectratio
97
5. Using On-Screen Menu
Options Function
NATIVE Theprojectordisplaysthecurrentimageinitstrueresolutionwhentheincomingcomputersignalhasalowerorhigherresolutionthantheprojector’snativeresolution.(→page3)Whentheincomingcomputersignalhasahigherresolutionthantheprojector'snativeresolution,thecenterofanimagewillbedisplayed.
LETTERBOX Theimageofaletterboxsignal(16:9)isstretchedequallyinthehorizontalandverticaldirectionstofitthescreen.
WIDESCREEN Theimageofasqueezesignal(16:9)isstretchedleftandrightin16:9.
ZOOM Theimageofasqueezesignal(16:9)isstretchedleftandrightin4:3.Partsofthedisplayedimagearecroppedattheleftandrightedgesandthereforenotvisible.
FULL Projecttofullscreensize.
TIP:• Imagepositioncanbeadjustedverticallyusing[POSITION]whenthe[16:9],[15:9],or[16:10]aspectratiosareselected.• Theterm“letterbox”referstoamorelandscape-orientedimagewhencomparedtoa4:3image,whichisthestandardaspect
ratioforavidesource. Theletterboxsignalhasaspectratioswiththevistasize“1.85:1”orcinemascopesize“2.35:1”formoviefilm.• Theterm“squeeze”referstothecompressedimageofwhichaspectratioisconvertedfrom16:9to4:3.
[INPUTRESOLUTION]TheresolutionisassignedautomaticallywhentheresolutionoftheinputsignalfromthecomputervideoinputterminalorBNCvideoinputterminal(analogRGB)cannotbedistinguished.
98
5. Using On-Screen Menu
[VIDEO]
UsingNoiseReduction[NOISEREDUCTION]Whenprojectingavideoimage,youcanusethe[NOISEREDUCTION]functiontoreducethescreennoise(roughnessanddistortion).Thisdeviceisequippedwiththreetypesofnoisereductionfunctions.Selectthefunctionaccordingtothetypeofnoise.Dependingonthenoiselevel,thenoisereductioneffectcanbesetto[OFF],[LOW],[MEDIUM]or[HIGH].[NOISEREDUCTION]canbeselectedforSDTV,HDTVsignalandcomponentsignalinput.
RANDOM NR ��������� Reduces flickering random noise in an image� MOSQUITO NR ������ Reduces mosquito noise that appears around the edges of an image during Blu-ray playback�BLOCK NR ������������� Reduces block noise or mosaic-like patterns by selecting ON�
SelectingInterlacedProgressiveConversionProcessMode[DEINTERLACE]Thisfunctionallowsyoutoselectaninterlaced-to-progressiveconversionprocessforvideosignals.
NORMAL ���������������� Automatically distinguishes a moving image from a static image to create a distinct image� Please select [MOVIE] if there are any obvious jitter and noises�
MOVIE ������������������� Select when projecting moving images� This is suitable for signals with a lot of jitter and noise�STILL ��������������������� Select when projecting static images� The video will flicker when a moving image is projected�
NOTE:ThisfunctionisnotavailablewithRGBsignals.
[CONTRASTENHANCEMENT]Usingthecharacteristicsofthehumaneye,apicturequalitywithasenseofcontrastandresolutionisachieved.
OFF ������������������������ Suite vision is switched off�AUTO ��������������������� Contrast and picture quality are automatically improved using the suite vision function�NORMAL ���������������� Adjust the gain manually�
99
5. Using On-Screen Menu
[SIGNALTYPE]SelectionofRGBandcomponentsignals.Normally,thisissetto[AUTO].Pleasechangethesettingifthecoloroftheimageremainsunnatural.
AUTO ��������������������� Automatically distinguishes RGB and component signals�RGB ����������������������� Switches to the RGB input�COMPONENT ��������� Switches to the component signal input�
[VIDEOLEVEL]SelectionofthevideosignallevelwhenconnectinganexternaldevicetotheHDMIINterminal,DisplayPortinputterminal,andHDBaseTinputterminaloftheprojector.
AUTO ��������������������� The video level is switched automatically based on the information from the device outputting the signal�Depending on the connected device, this setting may not be made properly� In this case, switch to [NORMAL” or “ENHANCED” from the menu and view with the optimum setting�
NORMAL ���������������� This disables the enhanced mode�ENHANCED ������������ This improves the image’s contrast, expressing the dark and light sections more dynamically�SUPER WHITE ������� The video contrast is improved and the dark areas appear more dynamic�
100
5. Using On-Screen Menu
[3D SETTINGS]
Pleasereferto“3-9Projecting3Dvideos”(→page48)fortheoperation.
FORMATSelectthe3Dvideoformat(recording/transmissionformat).Selecttomatchthe3Dbroadcastand3Dmedia.Nor-mally,[AUTO]isselected.Pleaseselectthe3Dinputsignalformatwhenthe3Ddetectionsignaloftheformatcannotbedistinguished.
L/RINVERTInvertthedisplayorderoftheleftandrightvideos.Select[ON]ifyoufeeluncomfortablewiththe3Ddisplaywhen[OFF]isselected.
101
5. Using On-Screen Menu
Using the Lens Memory Function [LENS MEMORY]
ThisfunctionservestostoretheadjustedvaluesforeachinputsignalwhenusingtheLENSSHIFT,ZOOMandFO-CUSbuttonsoftheprojector.Adjustedvaluescanbeappliedtothesignalyouselected.Thiswilleliminatetheneedtoadjustlensshift,focus,andzoomatthetimeofsourceselection.
STORE ������������������� Stores the current adjusted values in memory for each input signal�MOVE �������������������� Applies the adjusted values to the current signal�RESET �������������������� Returns the adjusted values to the last condition�
NOTE:• LensmemoryadjustmentswillbeautomaticallyregisteredtheENTRYLIST.Theselensmemoryadjustmentscanbeloadedfrom
theENTRYLIST.(→ page 87) Notethatperforming[CUT]or[ALLDELETE]intheENTRYLISTwilldeletelensmemoryadjustmentsaswellassourceadjust-
ments.Thisdeletionwillnottakeeffectuntilotheradjustmentsisloaded.• Forstoringeachadjustmentoflensshift,zoomandfocusascommonvalueforallinputsignal,storethemasreferencelens
memory.
Tostoreyouradjustedvaluesin[LENSMEMORY]:1. Project the connected device signal you want to adjust.
2. Adjusttheprojectingimageofposition,sizeandfocusbytheLENSSHIFT/HOMEPOSITION,ZOOM+/−,andFOCUS+/−buttons.
• Adjustmentcanbeperformedbytheremotecontrol.Pleasereferto“AdjustingthePictureSizeandPosition”onpage22.
• Slightadjustmentbymovingtheprojectorpositionandbythetiltfootisnotsubjectof[LENSMEMORY].
3.Movethecursoron[STORE]andpressENTER.
4.Movethecursoron[YES]andpressENTER.
102
5. Using On-Screen Menu
Tocalluptheadjustedvaluesfrom[LENSMEMORY]:1. Fromthemenu,select[ADJUST]→[LENSMEMORY]→[MOVE]andpresstheENTERbutton.
Theconfirmationscreenwillbedisplayed.
2. Press the ◀buttontoselectand[YES]andpresstheENTERbutton.
Duringprojection,iftheadjustedvaluesforaninputsignalhavebeensaved,thelenswillshift.Ifnot,thelenswillshiftaccordingtotheadjustedvaluesstoredintheselected[REF.LENSMEMORY][PROFILE]number.
Toautomaticallyapplytheadjustedvaluesatthetimeofsourceselection:1. Fromthemenu,select[SETUP]→[INSTALLATION(2)]→[REF.LENSMEMORY]→[LOADBYSIGNAL]and
press the ENTER button.
2. Press the ▼buttontoselectand[ON]andpresstheENTERbutton.
Thiswillmovethelensautomaticallytothepositionatthetimeofsourceselectionaccordingtotheadjustedvalues.
NOTE: • TheLensMemoryfunctionmaynotproduceacompletelyalignedimage(duetotolerancesinthelenses)usingtheadjusted
valuesstoredintheprojector.AftercallingupandapplyingtheadjustedvaluesfromtheLensMemoryfunction,finelyadjustthelensshift,zoomandfocustoproducethebestpossibleimage.
103
5. Using On-Screen Menu
❻ Menu Descriptions & Functions [DISPLAY][PIP/PICTURE BY PICTURE]
SUBINPUTSelecttheinputsignaltobedisplayedinthesub-display.Pleasereferto“4-2DisplayingTwoPicturesattheSameTime”(→page68)fordetailsontheoperation.
MODESelecteitherPIPorPICTUREBYPICTUREwhenswitchingto2-screendisplay.
PICTURE SWAPThevideosinthemaindisplayandsub-displaywillbeswitched.Pleasereferto“4-2DisplayingTwoPicturesattheSameTime”(→page70)fordetails.
PIP SETTINGSelectthedisplayposition,positionadjustmentandsizeofthesub-displayinthePIPscreen.
START POSITION ��� Selection of the display position of the sub-display when switching to the PIP screen�HORIZONTAL POSITION ������������������������������ Adjust the display position of the sub-display in the horizontal direction� The respective corners will serve
as reference points�VERTICAL POSITION ������������������������������ Adjust the display position of the sub-display in the vertical direction� The respective corners will serve as
reference points�SIZE ����������������������� Select the display size of the sub-display�
104
5. Using On-Screen Menu
TIP:Thehorizontalpositionandverticalpositionaretheamountofmovementfromthereferencepoints.Forexample,whenTOP-LEFTisadjusted,thepositionisdisplayedwiththesameamountofmovementevenifdisplayedwithotherstartingpositions.Themaximumamountofmovementishalftheresolutionoftheprojector.
ReferencepointAdjustusingthehorizon-talposition
Sub-display Maindisplay
Referencepoint
Adjustusingtheverticalposition
TOP-LEFT TOP-RIGHT
BOTTOM-LEFT BOTTOM-RIGHT
ReferencepointReferencepoint
BORDERSelectthedisplayboundaryofthemaindisplayandsub-displayofthe[PICTUREBYPICTURE]screen.
Displayboundary
Maindisplay Sub-displayMaindisplay Sub-display MaindisplaySub-display
TIP:• 6stepscanbeselectedonthisprojector.
105
5. Using On-Screen Menu
[GEOMETRIC CORRECTION]
KEYSTONEDisplaythetrapezoidcorrectionscreenandadjustthetrapezoidaldistortionoftheprojectionscreen.Todisplaythe[KEYSTONE]screen,select→[DISPLAY]→[GEOMETRICCORRECTION]→[KEYSTONE]intheon-screenmenu.The[GEOMETRICCORRECTION]screencanalsobedisplayedbypressing the3DREFORMbuttonontheremotecontrol.
HORIZONTAL ��������� Adjustments when projecting from a diagonal direction to the screen�
VERTICAL �������������� Adjustments when projecting from the top or bottom direction to the screen�
TILT ����������������������� Adjusts the distortion when performing trapezoidal correction with the screen moved in the vertical direction using the lens shift�
THROW RATIO ������� Adjusts according to the projection ratio of the optional lens used�
Modelnameoflensunit
Adjustmentrange
NP16FL 7–8NP17ZL 12–18NP18ZL 17–23NP19ZL 21–37NP20ZL 34–55NP21ZL 50–85NP31ZL 7–10NP39ML 4
NOTE:• Whenpowerissuppliedtothedevice,theadjustmentvalueofthe[KEYSTONE]usedpreviouslyisretainedevenifthegradient
ofthedeviceischanged.• Whenclearingtheadjustmentvalueof[KEYSTONE],pressthe3DREFORMbuttonfor2ormoreseconds.• Whensettingother[GEOMETRICCORRECTION]functions,the[KEYSTONE]menucannotbeselected.Whenperformingtrapezoidal
correction,pressthe3DREFORMbuttonfor2ormoresecondstocleartheadjustmentvalueof[GEOMETRICCORRECTION].• Aselectricalcorrection iscarriedoutby [KEYSTONE], thebrightnessmaybe reducedor thescreenqualitymaydeteriorate
sometimes.
106
5. Using On-Screen Menu
CORNERSTONEDisplaythe4-pointcorrectionscreenandadjustthetrapezoidaldistortionoftheprojectionscreen.Pleasereferto“CorrectingHorizontalandVerticalKeystoneDistortion[CORNERSTONE]”(→page42)fordetailsontheoperation.
HORIZONTALCORNER/VERTICALCORNERDistortioncorrectionforcornerprojectionsuchaswallsurfaces.
HORIZONTAL CORNER ������������������������������ Performs correction for projection onto a wall lying at an angle to the horizontal direction�
* Reverse angle correction is also possible�VERTICAL CORNER ������������������������������ Performs correction for projection onto a wall lying at an angle to the vertical direction�
* Reverse angle correction is also possible�
NOTE:• Whenthemaximumadjustmentrangeisexceeded,distortionadjustmentisdisabled.Setuptheprojectoratanoptimalangleas
thedeteriorationintheimagequalityincreasesasthedistortionadjustmentvolumegetslarger.• Pleasenotethattheimagewillgooutoffocusduetothedifferenceinthedistancebetweentheupperandlowerorleftandright
sidesandthecenterofthescreenforprojectionscuttingacrosscorners.Lenseswithshortfocalpointsarealsonotrecommendedforprojectionscuttingacrosscornersastheimagewillgooutoffocus.
107
5. Using On-Screen Menu
Adjustment method1. Alignthecursorwiththe[HORIZONTALCORNER]or[VERTICALCORNER]ofthe[GEOMETRICCORREC-
TION]menuandthenpresstheENTERbutton.
• Theadjustmentscreenwillbedisplayed.
2. Press the ▼▲◀▶ buttons to align the cursor (yellow box) with the target adjustment point and then press the ENTER button.
• Thecursorwillchangeintoanadjustmentpoint(yellowincolor).
3. Press the ▼▲◀▶buttonstoadjustthecornersorsidesofthescreenandthenpresstheENTERbutton.
• Theadjustmentpointwillgobacktobeingacursor(yellowbox).
Explanationofscreentransition
• Theadjustmentpointsofthefourcorners(a,c,fandhinthedrawing)willmoveindependently.
• Thefollowingadjustmentpointsdifferatthe[HORIZONTALCORNER]and[VERTICALCORNER].
HORIZONTALCORNER:WhenPointbinthedrawingismoved,andtheuppersideandPointgaremoved,thelowersidewillmoveinaparallelmanner.
VERTICALCORNER:WhenPointdinthedrawingismoved,andtheleftsideandPointearemoved,therightsidewillmoveinaparallelmanner.
[Adjustmentpointsofthe[HORIZONTALCORNER]screenandmovementpointsoftheprojectionscreen]
a
b
b c
d e
f g h
a c
d e
fg
h
PointbwillbedisplacedinaparallelmanneratthesametimeasPointsa,b,c
PointgwillbedisplacedinaparallelmanneratthesametimeasPointsf,g,h
[Adjustmentpointsofthe[VERTICALCORNER]screenandmovementpointsoftheprojectionscreen]
a
a
b
bc
cd
dee
f
f
g
gh
h
PointdwillbedisplacedinaparallelmanneratthesametimeasPointsa,d,f
PointewillbedisplacedinaparallelmanneratthesametimeasPointsf,g,h
4. StartfromStep2onwardstoadjusttheotherpoints.
5. When the adjustment is completed, press the ▼▲◀▶buttonstoalignthecursorwiththe[EXIT]intheadjustment screen and then press theENTER button.
• Switchtothe[GEOMETRICCORRECTION]menuscreen.
108
5. Using On-Screen Menu
PINCUSHIONAdjustthecurvedistortionoftheprojectionscreen.
TOP ������������������������ Adjust the curve distortion of the upper edge of the projection screen�
BOTTOM ���������������� Adjust the curve distortion of the lower edge of the projection screen�
LEFT ���������������������� Adjust the curve distortion of the left edge of the projection screen�RIGHT �������������������� Adjust the curve distortion of the right edge of the projection
screen�
TOP
LEFT RIGHT
BOTTOM
PCTOOL(Forfuturesupport)Recallthegeometriccorrectiondatathatisregisteredintheprojectorbeforehand.Therearethreetypesofregistereddata.
NOTE:• KEYSTONE,CORNERSTONE,andPINCUSHIONcannotbeselectedwhensettingthegeometriccorrectionusingaPCtool.• Toclearthe[GEOMETRICCORRECTION]datathathasbeensetup,pressthe3DREFORMbuttonfor2ormoreseconds.• Aselectricalcorrectioniscarriedout ingeometriccorrection,thebrightnessmaybeaffectedandthepicturequalitymaybe
degraded.
RESETResettheadjustmentvaluethathasbeensetupinGEOMETRICCORRECTION(returntotheinitialvalue).
109
5. Using On-Screen Menu
[EDGE BLENDING]
Thisadjuststheedges(boundaries)oftheprojectionscreenwhenprojectinghighresolutionvideosusingacombina-tionofseveralprojectorsintheup,down,leftandrightpositions.
MODEThisenablesordisablestheEDGEBLENDINGfunction.WhenMODEissettoON,theTOP,BOTTOM,LEFT,RIGHTandBLACKLEVELsettingscanbeadjusted.
TOP/BOTTOM/LEFT/RIGHTThisselectstheEDGEBLENDINGlocationsontheleft,right,topandbottomonthescreen.Thefollowingsettingscanbeadjustedwhenanitemisselected.(→page73)
CONTROL �������������� Enable TOP, BOTTOM, LEFT and RIGHT functions�MARKER ���������������� Set whether to display marker or not when adjusting the range and display position� When turned on, a
magenta marker for adjusting the range adjustment and a green marker for adjusting the display position will be displayed�
RANGE ������������������� Adjust the range (width) of the edge blending�POSITION �������������� Adjust the display position of the edge blending�
BLACKLEVELDividethescreenintoninepartsandkeeptheblackleveluniformforeachprojector.TheninedivisionsscreensareTOP-LEFT,TOP-CENTER,TOP-RIGHT,CENTER-LEFT,CENTER,CENTER-RIGHT,BOTTOM-LEFT,BOTTOM-CENTERandBOTTOM-RIGHT.(→page76)
110
5. Using On-Screen Menu
[MULTI SCREEN]
WHITEBALANCEThisadjuststhewhitebalanceforeachprojectorwhenprojectingusingacombinationofseveralprojectors.Thiscanbeadjustedwhen[MODE]issetto[ON].
BRIGHTNESS W, BRIGHTNESS R, BRIGHTNESS G, BRIGHTNESS B ������������������������������ Adjusting the black color of the video�CONTRAST W, CONTRAST R, CONTRAST G, CONTRAST B ������������������������������ Adjusting the white color of the video�
PICTURE SETTINGThissetsthedivisionconditionwhenprojectingusingacombinationofseveralprojectors.Pleasereferto“4.Multi-ScreenProjection”(→page64)fordetails.
MODE OFF Usetheprojectorinastandalonestate.
ZOOM Thisadjuststhepositionandwidthofthevideoareathatyouwishtodivide.Theedgeblendingwidthwillalsobeautomaticallysettothatwidth.
TILING Thisassignsthedividedscreenstotheprojectors.Theedgeblendingfunctionwillalsobesetautomatically.
ZOOM HORIZONTALZOOM
Thismaginifiesthevideoareainthehorizontaldirection.
VERTICALZOOM
Thismaginifiesthevideoareaintheverticaldirection.
HORIZONTALPOSITION
Thisshiftsthevideoareainthehorizontaldirection.
VERTICALPO-SITION
Thisshiftsthevideoareaintheverticaldirection.
TILING WIDTH Thisselectsthenumberofprojectorstobearrangedhorizontally.
HEIGHT Thisselectsthenumberofprojectorstobearrangedvertically.
HORIZONTALPOSITION
Thisselectsthepositionoftheprojectorstartingfromtheleftamongthosearrangedhorizontally.
VERTICALPO-SITION
Thisselectsthepositionoftheprojectorstartingfromthetopamongthosearrangedvertically.
111
5. Using On-Screen Menu
Conditions for using tiling• Alltheprojectorsneedtofulfilthefollowingconditions.• Thepanelsizemustbethesame• Theprojectionscreensizemustbethesame• Theleftandrightendsortopandbottomendsoftheprojectionscreenmustbeconsistent.• Thesettingsfortheleftandrightedgesoftheedgeblendingarethesame• Thesettingsforthetopandbottomedgesoftheedgeblendingarethesame Ifthetilingconditionsaresatisfied,thevideoscreenoftheprojectorateachinstallationpositionwillbeautomaticallyextractedandprojected. Ifthetilingconditionsarenotsatisfied,adjustthevideoscreenoftheprojectorateachinstallationpositionusingthezoomfunction.• AssignauniquecontrolIDtoeachprojector.• Setthe“ColorSetting”and“DeepColorSetting”onyourBlu-rayplayerorcomputerto“Auto”.Refertotheowner’smanualaccompanyingyourBlu-rayplayerorcomputerformoreinformation. ConnecttheHDMIoutputofyourBlu-rayplayerorcomputertothefirstprojector.ThenconnecttotheHDMIINinputterminalofthesecondandsubsequenttiledprojectors.
Tilingsettingexample)Numberofhorizontalunits=2,Numberofverticalunits=2
Horizontalorder=SecondunitVerticalorder=Firstunit
112
5. Using On-Screen Menu
❼ Menu Descriptions & Functions [SETUP]
[MENU]
SelectingMenuLanguage[LANGUAGE]Youcanchooseoneof29languagesforon-screeninstructions.
NOTE:Yoursettingwillnotbeaffectedevenwhen[RESET]isdonefromthemenu.
SelectingMenuColor[COLORSELECT]Youcanchoosebetweentwooptionsformenucolor:COLORandMONOCHROME.
TurningOn/OffSourceDisplay[INPUTDISPLAY]ThisoptionturnsonoroffinputnamedisplaysuchasHDMI,DisplayPort,BNC,BNC(CV),BNC(Y/C),COMPUTER,HDBaseTtobedisplayedonthetoprightofthescreen.
Turningmessagesonandoff[MESSAGEDISPLAY]Thisoptionselectswhetherornottodisplayprojectormessagesatthebottomoftheprojectedimage.Evenwhen“OFF”isselected,thesecuritylockwarningisdisplayed.Thesecuritylockwarningturnsoffwhenthesecuritylockiscanceled.
TurningON/OFFControlID[IDDISPLAY]ID DISPLAY ����������� This option turns on or off the ID number which is displayed when the ID SET button on the remote control
is pressed� (→ page 125)
113
5. Using On-Screen Menu
[3DCAUTIONMESSAGE]Thisselectswhethertodisplayacautionmessageornotwhenswitchingtoa3Dvideo.ThedefaultconditionwhenshippedfromthefactoryisON.
OFF ������������������������ The 3D caution message screen will not be displayed�ON ������������������������� The 3D caution message screen will be displayed when switching to a 3D video� Press the ENTER button
to cancel the message�• Themessagewilldisappearautomaticallyafter60secondsorwhenotherbuttonsarepressed.Ifitdisap-
pears automatically, the 3D caution message will be displayed again when switching to a 3D video�
SelectingMenuDisplayTime[DISPLAYTIME]Thisoptionallowsyoutoselecthowlongtheprojectorwaitsafterthelasttouchofabuttontoturnoffthemenu.Thepresetchoicesare[MANUAL],[AUTO5SEC],[AUTO15SEC],and[AUTO45SEC].The[AUTO45SEC]isthefac-torypreset.
114
5. Using On-Screen Menu
[INSTALLATION(1)]
SelectingProjectorOrientation[ORIENTATION]Thisreorientsyourimageforyourtypeofprojection.Theoptionsare:desktopfrontprojection,ceilingrearprojection,desktoprearprojection,andceilingfrontprojection.
NOTE: • Pleaseconsultthedealerifyourequirespecialinstallationservicese.g.whenmountingtheprojectortoaceiling.Neverinstall
theprojectoronyourown.Thismayresultintheprojectorfallingdownandcausinginjurytopeople.
AUTO ��������������������� This automatically detects and projects the DESKTOP FRONT and CEILING FRONT�
NOTE:• TheDESKTOPREARandCEILINGREARwillnotbedetected.Pleaseselectmanually.
DESKTOPFRONT CEILINGREAR
DESKTOPREAR CEILINGFRONT
TIP:• CheckwhethertheautomaticDESKTOPFRONTisinstalledwithin±10degreesforfloorinstallationandwhethertheCEILING
FRONTiswithin±10degreesforceilinginstallation.Selectmanuallywhentheprojectionscreenisinverted.
115
5. Using On-Screen Menu
SelectingAspectRatioandPositionforScreen[SCREENTYPE]
Screentype Setstheaspectratiooftheprojectionscreen.
FREE Theratiooftheliquidcrystalpanelisselected.Selectthiswhenprojectingmulti-screenand17:9screen(2K).
4:3screen Forascreenwitha4:3aspectratio
16:9screen Forascreenwitha16:9aspectratio
16:10screen Forascreenwitha16:10aspectratio
NOTE:• Afterchangingthescreentype,checkthesettingof[ASPECTRATIO]inthemenu.(→ page 96)
UsingtheWallColorCorrection[WALLCOLOR]
Thisfunctionallowsforquickadaptivecolorcorrectioninapplicationswherethescreenmaterialisnotwhite.
SelectingFanMode[FANMODE]FanModeisusedtosetthespeedoftheinternalcoolingfan.
MODE �������������������� Select mode for fan speed: AUTO and HIGH�AUTO: The built-in fans automatically run at a variable speed depending on the temperature and atmospheric pressure sensor�HIGH: The built-in fans run at a high speed� Select this option for continuously using the projector for several days�
NOTE: • Yoursettingwillnotbeaffectedevenwhen[RESET]isdonefromthemenu.
TIP:• When[HIGH]isselectedfor[FANMODE],asymbolicon willbedisplayedatthebottomofthemenu.
116
5. Using On-Screen Menu
[LIGHTMODE]Adjusting theenergysavingssettingsand thebrightnessofeachprojector inmulti-screenprojection.Forenergysavingssettings,seepage39“3-6.ChangingLIGHTMODE/CheckingEnergy-SavingEffectUsingLIGHTMODE[LIGHTMODE]”.
LIGHTMODE NORMAL Thelightmoduleluminance(brightness)willbecome100%andthescreenwillturnbright.
ECO1 Bycontrollingthebrightnessandfanspeedaccordingtotheselectedsetting,energycanbesavedandmotionnoiseandthepowerconsumptioncanbelowered.Canbeselectedwhen[CONSTANTBRIGHTNESS]modeissetto[OFF].ECO2
CONSTANTBRIGHTNESS
OFF [CONSTANTBRIGHTNESS]modewillbecanceled.
ON Maintainsthebrightnessthatisineffectatthetime[ON]isselected.Unless[OFF]isse-lected,thesamesettingswillremainineffectevenwhentheprojectoristurnedoff.• Tore-adjustthebrightness,firstturnthissettingOFFbeforemakingfurtheradjustments.
NOTE:• [CONSTANTBRIGHTNESS]modeisafunctionusedtomaintainthebrightnessataconstant
level.Colorwillnotbefixed.
ADJUST Brightnesscanbeadjustedin1%incrementsfrom20to100%.Whenseveralprojectorsareusedformulti-screenprojection,thebrightnesscanbead-justedindividuallyoneachprojector.Theadjustmentiseffectivewhen[NORMAL][LIGHTMODE]isselectedand[CONSTANTBRIGHTNESS]modeisturned[OFF].
TIP:• Brightnessnormallydecreaseswithuse,butbyselecting[CONSTANTBRIGHTNESS]mode,sensorsinsidetheprojectordetect
brightnessandautomaticallyadjusttheoutput,therebymaintainingaconstantbrightnessthroughoutthelifeofthelightmodule. However,ifoutputisalreadyatitsmaximum,brightnesswilldecreasewithuse. Forthisreason,whenusingmulti-screenprojection,itisrecommendedtoadjustthebrightnesstoaslightlylowerlevel,then
settingthe[CONSTANTBRIGHTNESS]modeto[ON].
[REF.WHITEBALANCE]Thisfeatureallowsyoutoadjustthewhitebalanceforallsignals.Thewhiteandblacklevelsofthesignalareadjustedforoptimumcolorreproduction.
CONTRAST R/CONTRAST G/CONTRAST B ������������������������������ These adjust the picture’s white color�BRIGHTNESS R/BRIGHTNESS G/BRIGHTNESS B ������������������������������ These adjust the picture’s black color�
3D GLASSESSelect3Dglassesmethod.
DLP® Link ������������� Select when using DLP® Link type 3D glasses�OTHERS ����������������� Select when using a non 3D emitter type glasses� It is required to connect the 3D emitter to the 3D SYNC
terminal of this projector� Please refer to page 50 about recommended items of 3D glasses and 3D emitter for this projector�
117
5. Using On-Screen Menu
[INSTALLATION(2)]
[SHUTTERSETTINGS]Enablinganddisablingthelensshutterfunction.YoucanalsosethowlongthelightwilltaketofadeinandfadeoutwheneithertheSHUTTERbuttonontheremotecontrolortheSHUTTER/CALIBRATIONbuttononthecabinetispressed.
POWERONSHUTTER
OPEN When thepower is turnedon, the lightsourcecomesonand thepicture isprojected.
CLOSE Thelightsourcedoesnotcomeonwhenthepoweristurnedon.WhentheSHUTTERbuttonispressed,theshutter isreleasedandthelightsourceisturnedon.
PICTUREMUTESHUTTER
OPEN Thelightsourceisstillonwhenthepictureisturnedoffforswitchingtheinputterminals.
CLOSE Thelightsourceturnsoffwhenthepictureisturnedoffforswitchingtheinputterminals.
FADEINTIME SethowlongthelightwilltaketofadeinaftertheSHUTTERbuttonispressed.Thetimecanbesetfrom0to10secondsinincrementsof1second.
FADEOUTTIME SethowlongthelightwilltaketofadeoutaftertheSHUTTERbuttonispressed.Thetimecanbesetfrom0to10secondsinincrementsof1second.
118
5. Using On-Screen Menu
UsingtheReferenceLensMemoryFunction[REF.LENSMEMORY]ThisfunctionservestostoretheadjustedvaluescommontoallinputsourceswhenusingtheLENSSHIFT,ZOOMandFOCUSbuttonsoftheprojectorortheremotecontrol.Theadjustedvaluesstoredinmemorycanbeusedasareferencetothecurrent.
PROFILE ���������������� Select a stored [PROFILE] number�STORE ������������������� Stores the current adjusted values in memory as a reference�MOVE �������������������� Applies the adjusted reference values stored in [STORE] to the current signal�RESET �������������������� Reset selected [PROFILE] number [REF� LENS MEMORY] to the factory default settings�LOAD BY SIGNAL �� When you switch signals the lens will shift to the lens shift, zoom, and focus values for the selected [PRO-
FILE] number�If no adjusted values have been saved to [LENS MEMORY], the lens will apply [REF� LENS MEMORY] adjusted values� Alternatively, if no adjusted values have been saved to [REF� LENS MEMORY], the unit will return to factory default settings�
FORCED MUTE ������ To turn off the image during lens shift, select [YES]�
NOTE:• Adjustedvaluesin[REF.LENSMEMORY]willnotbereturnedtodefaultwhenperforming[CURRENTSIGNAL]or[ALLDATA]for
[RESET]fromthemenu.• Tostoreadjustedvaluesforeachinputsource,usetheLensMemoryfunction.(→ page 58, 101)• When[PICTUREMUTESHUTTER]under[SHUTTERSETTINGS]is[ON],[FORCEDMUTE]willturnoffthelightsourceandstop
projection.(→ previouspage)
[LENSCALIBRATION]Theadjustmentrangeofthezoom,focus,andshiftofthe[LENSMEMORY]iscalibrated.Besuretocarryout[LENSCALIBRATION]afterreplacingthelens.
[LENSPOSITION]Movethelensposition.
HOME �������������������� Set back the lens to the home position�TYPE ���������������������� Select this for using the lens unit NP39ML� The lens position will be adjusted to the appropriate position�
119
5. Using On-Screen Menu
[CONTROL]
TOOLS
ADMINISTRATORMODEThisallowsyoutoselectMENUMODE,savesettings,andsetapasswordfortheadministratormode.
MENUMODE Selecteither[BASIC]or[ADVANCED]menu.(→page80)
—
NOTSAVESETTINGVALUES
Placing a check mark will not save your projector settings�Clear this check box to save your projector settings�
—
NEWPASSWORD/CONFIRMPASS-WORD
Assignapasswordfortheadministratormode. Upto10alphanumericcharacters
120
5. Using On-Screen Menu
PROGRAMTIMER
Thisoptionturnson/standbytheprojectorandchangesvideosignals,andselectsLIGHTmodeautomaticallyataspecifiedtime.
NOTE:• Beforeusing[PROGRAMTIMER],makesurethatthe[DATEANDTIME]featureisset.(→ page 123) MakesurethattheprojectorisinthestandbyconditionwiththePOWERcordconnected. Theprojectorhasabuilt-inclock.Theclockwillkeepworkingforabouttwoweeksafterthemainpoweristurnedoff.Ifthemain
powerisnotsuppliedtotheprojectorfortwoweeksormore,itrequirestoset[DATEANDTIMESETTINGS]featureagain.
Setting a new program timer1. On the PROGRAM TIMER screen, use the ▲ or ▼buttontoselect[SETTINGS]andpresstheENTERbutton.
The[PROGRAMLIST]screenwillbedisplayed.
2. Select a blank program number and press the ENTER button.
The[EDIT]screenwillbedisplayed.
3. Makesettingsforeachitemasrequired.
ACTIVE ������������������ Place a check mark to enable the program�DAY ������������������������ Select days of the week for the program timer� To execute the program from Monday to Friday, select [MON-
FRI]� To execute the program in everyday basis, select [EVERYDAY]�
121
5. Using On-Screen Menu
TIME ���������������������� Set the time to execute the program� Enter time in 24-hour format�FUNCTION ������������� Select a function to be executed� Selecting [POWER] will allow you to turn on or off the projector by setting
[ADVANCED SETTINGS]� Selecting [INPUT] will allow you to select a video source by setting [ADVANCED SETTINGS]� Selecting [LIGHT MODE] will allow you to select [LIGHT MODE] by setting [ADVANCED SET-TINGS]�
ADVANCED SETTINGS ������������������������������ Select power on/off, a type of video source, or LIGHT MODE for the selected item in [FUNCTION]�REPEAT ������������������ Place a check mark to repeat the program continuing basis� To use the program this week only, clear the
check mark�4. Select[OK]andpresstheENTERbutton.
Thiswillcompletethesettings.
Youwillbereturnedtothe[PROGRAMLIST]screen.
5. Select[BACK]andpresstheENTERbutton.
Youwillbereturnedtothe[PROGRAMTIMER]screen.
6. Select[EXIT]andpresstheENTERbutton.
Youwillbereturnedtothe[TOOLS]screen.
NOTE:• Upto30differenttimersettingscanbeprogrammed.• When[PROGRAMTIMER]isturnedon,the[STANDBYMODE]settingisignored.• TheProgramTimerisexecutedonasettimebasis,notinaprogrambasis.• Oncetheprogramnotmarkedwithacheckin[REPEAT]hasbeenexecuted,thecheckmarkinthe[ACTIVE]checkboxwillbe
clearedautomaticallyandtheprogramwillbedisabled.• Whentheon-timeandtheoff-timesetforthesametime,theoff-timesettingwilltakepreference.• Twodifferentsourcesaresetforthesametime,thelargerprogramnumberwilltakepreference.• Theon-timesettingwillnotbeexecutedwhilethecoolingfansarerunningoranerrorisoccurring.• Iftheoff-timesettingisexpiredundertheconditioninwhichthepoweroffisnotpossible,theoff-timersettingwillnotbeexecuted
untilthepoweroffbecomespossible.• Programsnotmarkedwithacheckmarkin[ACTIVE]ofthe[EDIT]screenwillnotbeexecutedeveniftheProgramTimeris
enabled.• Whentheprojectoristurnedonbyusingtheprogramtimerandifyouwanttoturnofftheprojector,settheoff-timeordoit
manuallysoasnottoleavetheprojectoronforalongperiodoftime.
122
5. Using On-Screen Menu
Activating the program timer
1. Select[ENABLE]onthe[PROGRAMTIMER]screenandpresstheENTERbutton.
Theselectionscreenwillbedisplayed.
2. Press the ▼buttontoalignthecursorwith[ON]andthenpresstheENTERbutton.
Returntothe[PROGRAMTIMER]screen.
NOTE:• Whentheeffectivesettingsofthe[PROGRAMTIMER]havenotbeensetto[ON],theprogramwillnotbeexecutedevenifthe
[ACTIVE]itemsintheprogramlisthavebeenticked.• Evenwhentheeffectivesettingsofthe[PROGRAMTIMER]aresetto[ON],the[PROGRAMTIMER]willnotworkuntilthe[PRO-
GRAMTIMER]screenisclosed.
Changing the programmed settings
1. Onthe[PROGRAMLIST]screen,selectaprogramyouwanttoeditandpresstheENTERbutton.
2. Changethesettingsonthe[EDIT]screen.
3. Select[OK]andpresstheENTERbutton.
Theprogrammedsettingswillbechanged.
Youwillbereturnedtothe[PROGRAMLIST]screen.
Changing the order of programs
1. Onthe[PROGRAMLIST]screen,selectaprogramwhoseorderyouwanttochangeandpressthe▶ button.
2. Press the ▼ button to select ▲ or ▼.
3. PresstheENTERbuttonafewtimestoselectarowtowhichyouwishtomovetheprogram.
Theorderoftheprogramswillbechanged.
Deleting the programs
1. Onthe[PROGRAMLIST]screen,selectaprogramnumberyouwanttodeleteandpressthe▶ button.
2. Press the ▼buttontoselect[DELETE].
3. Press the ENTER button.
Theconfirmationscreenwillbedisplayed.
4. Select[YES]andpresstheENTERbutton.
Theprogramwillbedeleted.
Thiswillcompletedeletingtheprogram.
123
5. Using On-Screen Menu
DATEANDTIMESETTINGS
Youcansetthecurrenttime,month,date,andyear.NOTE:Theprojectorhasabuilt-inclock.Theclockwillkeepworkingforabout2weeksafterthemainpoweristurnedoff.Ifthemainpowerisofffor2weeksormore,thebuilt-inclockwillcease.Ifthebuilt-inclockceases,setthedateandtimeagain.Thebuilt-inclockwillnotceasewhileinthestandbymode.
TIME ZONE SETTINGS �������������� Select your time zone�DATE AND TIME SETTINGS ������ Set your current date (MM/DD/YYYY) and time (HH:MM)� INTERNET TIME SERVER ��������� If you place a check mark, the projector’s built-in clock will be synchronized with an Internet
time server in every 24 hours and at the time of projector’s startup�UPDATE ������������������������������������ Synchronizes the projector’s built-in clock immediately� The UPDATE button is not available
unless the INTERNET TIME SERVER check box is turned on�SUMMER TIME SETTINGS ������� If you place a check mark, the clock for daylight saving will be enabled�
[MOUSE]Thisfunctioncannotbeusedinthisdevice.Itisusedforfutureexpansionpurposesonly.
124
5. Using On-Screen Menu
DisablingtheCabinetButtons[CONTROLPANELLOCK]ThisoptionturnsonorofftheCONTROLPANELLOCKfunction.
NOTE:• Howtocancelthe[CONTROLPANELLOCK] Whenthe[CONTROLPANELLOCK]issetto[ON],presstheSOURCEbuttononthemainbodyforabout10secondstocancel
the[CONTROLPANELLOCK].
TIP:• Whenthe[CONTROLPANELLOCK]isturnedon,akeylockicon[ ]willbedisplayedatthebottomrightofthemenu.• ThisCONTROLPANELLOCKdoesnotaffecttheremotecontrolfunctions.
EnablingSecurity[SECURITY]ThisfeatureturnsonorofftheSECURITYfunction.Unlessthecorrectkeywordisentered,theprojectorcannotprojectanimage.(→page45)
NOTE:Yoursettingwillnotbeaffectedevenwhen[RESET]isdonefromthemenu.
SelectingCommunicationSpeed[COMMUNICATIONSPEED]ThisfeaturesetsthebaudrateofthePCControlport(D-Sub9P).Itsupportsdataratesfrom4800to115200bps.Thedefaultis38400bps.Selecttheappropriatebaudrateforyourequipmenttobeconnected(dependingontheequipment,alowerbaudratemayberecommendedforlongcableruns).
NOTE:• Select[38400bps]orlesswhenusingthesuppliedsoftwareprograms.• Yourselectedcommunicationspeedwillnotbeaffectedevenwhen[RESET]isdonefromthemenu.
125
5. Using On-Screen Menu
SettingIDtotheProjector[CONTROLID]YoucanoperatemultipleprojectorsseparatelyandindependentlywiththesingleremotecontrolthathastheCONTROLIDfunction.IfyouassignthesameIDtoalltheprojectors,youcanconvenientlyoperatealltheprojectorstogetherusingthesingleremotecontrol.Todoso,youhavetoassignanIDnumbertoeachprojector.
CONTROL ID NUMBER �������Select a number from 1 to 254 you wish to assign to your projector�CONTROL ID �����������������������Select [OFF] to turn off the CONTROL ID setting and select [ON] to turn on the CONTROL ID setting�
NOTE: • When[ON]isselectedfor[CONTROLID],theprojectorcannotbeoperatedbyusingtheremotecontrolthatdoesnotsupport
theCONTROLIDfunction.(Inthiscasethebuttonsontheprojectorcabinetcanbeused.)• Yoursettingwillnotbeaffectedevenwhen[RESET]isdonefromthemenu.• PressingandholdingtheENTERbuttonontheprojectorcabinetfor10secondswilldisplaythemenuforcancelingtheControl
ID.
Assigning or Changing the Control ID1. Turn on the projector.
2. Press the ID SET button on the remote control.
TheCONTROLIDscreenwillbedisplayed.
IftheprojectorcanbeoperatedwiththecurrentremotecontrolID,the[AC-TIVE]willbedisplayed.IftheprojectorcannotbeoperatedwiththecurrentremotecontrolID,the[INACTIVE]willbedisplayed.Tooperatetheinactiveprojector,assignthecontrolIDusedfortheprojectorbyusingthefollowingprocedure(Step3).
3. PressoneofnumerickeypadbuttonswhilepressingandholdingtheIDSET button on the remote control.
Example:
Toassign“3”,pressthe“3”buttonontheremotecontrol.
NoIDmeansthatalltheprojectorscanbeoperatedtogetherwithasingleremotecontrol.Toset“NoID”,enter“000”orpresstheCLEARbutton.
TIP:TherangeofIDsisfrom1to254.4. Release the ID SET button.
TheupdatedCONTROLIDscreenwillbedisplayed.
NOTE: • TheIDscanbeclearedinafewdaysafterthebatteriesarerundownorremoved.• Ifoneofbuttonsof theremotecontrolwithoutbatteries ispressedaccidentally,
currentspecifiedIDwillbecleared.
126
5. Using On-Screen Menu
TurningOnorOffRemoteSensor[REMOTESENSOR]Thisoptiondetermineswhichremotesensorontheprojectorisenabledinwirelessmode.Theoptionsare:FRONT/BACK,FRONT,BACK,andHDBaseT.
NOTE:• TheremotecontroloftheprojectorwillnotbeabletoreceivesignalsifthepowersupplyoftheHDBaseTsupportedtransmission
deviceconnectedtotheprojectoronwhich“HDBaseT”settinghasbeenON.
TIP:• Iftheremotecontrolsystemdoesnotfunctionwhendirectsunlightorstrongilluminationstrikestheremotecontrolsensorof
the projector, change another option.
127
5. Using On-Screen Menu
[NETWORK SETTINGS]
Important:• Consultwithyournetworkadministratoraboutthesesettings.• WhenusingawiredLANconnection,connectaLANcable(Ethernetcable)totheLANport(RJ-45)oftheprojector.(→ page
152)
TIP:Thenetworksettingsyoumakewillnotbeaffectedevenwhen[RESET]isdonefromthemenu.
Hints on How to Set Up LAN Connection
To set up the projector for a LAN connection:Select[WIREDLAN]→[PROFILES]→[PROFILE1]or[PROFILE2].TwosettingscanbesetforwiredLAN.Nextturnonorofffor[DHCP],[IPADDRESS],[SUBNETMASK],and[GATEWAY]andselect[OK]andpresstheENTERbutton.(→page128)To recall LAN settings stored in the profile number:Select[PROFILE1]or[PROFILE2]forwiredLAN,andthenselect[OK]andpresstheENTERbutton.(→page128)To connect a DHCP server:Turnon[DHCP]forwiredLAN.Select[ON]andpresstheENTERbutton.TospecifyIPaddresswithoutusingtheDHCPserver,turnoff[DHCP].(→page128)To receive error messages via e-mail:Select[ALERTMAIL],andset[SENDER'SADDRESS],[SMTPSERVERNAME],and[RECIPIENT'SADDRESS].Last,select[OK]andpresstheENTERbutton.(→page130)
128
5. Using On-Screen Menu
WIRED LAN
PROFILES • Thesettingsforusingthebuilt-inEthernet/HDBaseTportintheprojectorcanberecordedintheprojectormemoryintwoways.• Select[PROFILE1]or[PROFILE2]andthendosettingsfor[DHCP]andtheotheroptions. Afterdoingthis,select[OK]andpresstheENTERbutton.Thiswillstoreyoursettingsinmemory.• Torecallthesettingsfrommemory: Afterselecting[PROFILE1]or[PROFILE2]fromthe[PRO-FILES]list. Select[OK]andpresstheENTERbutton.• Select[DISABLE]whennotconnectingtoawiredLAN
—
DHCP PlaceacheckmarktoautomaticallyassignanIPaddresstotheprojectorfromyourDHCPserver.ClearthischeckboxtoregistertheIPaddressorsubnetmasknumberobtainedfromyournetworkadministrator.
—
IPADDRESS SetyourIPaddressofthenetworkconnectedtotheprojectorwhen[DHCP]isturnedoff.
Upto12numericcharacters
SUBNETMASK Setyoursubnetmasknumberofthenetworkconnectedtotheprojectorwhen[DHCP]isturnedoff.
Upto12numericcharacters
GATEWAY Setthedefaultgatewayofthenetworkconnectedtotheprojectorwhen[DHCP]isturnedoff.
Upto12numericcharacters
AUTODNS PlaceacheckmarktoautomaticallyassigntheIPaddressofyourDNSserverconnectedtotheprojectorfromyourDHCPserver.ClearthischeckboxtosettheIPaddressofyourDNSserverconnectedtotheprojector.
Upto12numericcharacters
DNSCONFIGURA-TION
SettheIPaddressofyourDNSserveronthenetworkconnectedtotheprojectorwhen[AUTODNS]iscleared.
Upto12numericcharacters
RECONNECT Retrytoconnecttheprojectortoanetwork.Trythisifyouhavechanged[PROFILES].
—
129
5. Using On-Screen Menu
PROJECTORNAME
PROJECTORNAME Setauniqueprojectorname. Upto16alphanu-mericcharactersandsymbols
DOMAINSetahostnameanddomainnameoftheprojector.
HOSTNAME Setahostnameoftheprojector. Upto15alphanumericcharacters
DOMAINNAME Setadomainnameoftheprojector. Upto60alphanumericcharacters
130
5. Using On-Screen Menu
ALERTMAIL
ALERTMAIL Thisoptionwillnotifyyourcomputeroferrormessagesviae-mailwhenusingwirelessorwiredLAN.
Placing a checkmark will turn on the Alert Mail feature�Clearing a checkmark will turn off the Alert Mail feature�
Sample of a message to be sent from the projector:
Subject:[Projector]ProjectorInformationTHECOOLINGFANHASSTOPPED.[INFORMATION]PROJECTORNAME:PX803ULSeriesLIGHTHOURSUSED:0000[H]
—
HOSTNAME Typeinahostname. Upto15alphanumericcharacters
DOMAINNAME Typeinadomainnameofthenetworkconnectedtotheprojector. Upto60alphanumericcharacters
SENDER'SAD-DRESS
Specifythesender’saddress. Upto60alphanu-mericcharactersandsymbols
SMTPSERVERNAME
TypeintheSMTPservernametobeconnectedtotheprojector. Upto60alphanumericcharacters
RECIPIENT'SAD-DRESS1,2,3
Typeinyourrecipient’saddress. Upto60alphanu-mericcharactersandsymbols
TESTMAIL Sendatestmailtocheckifyoursettingsarecorrect.NOTE:• Ifyouenteredanincorrectaddressinatest,youmaynotreceivean
Alert mail. Should this happen, check if the Recipient’s Address iscorrectlyset.
• Unless any one of the [SENDER'S ADDRESS], [SMTP SERVER'SNAME]or[RECIPIENT'SADDRESS1-3]isselected,[TESTMAIL]isnotavailable.
• Besuretohighlight[OK]andpresstheENTERbuttonbeforeexecuting[TESTMAIL].
—
131
5. Using On-Screen Menu
NETWORKSERVICE
HTTPSERVER SetapasswordforyourHTTPserver. Upto10alphanumericcharacters
PJLink This option allows you to set a passwordwhen you use thePJLinkfeature.NOTE: • Donotforgetyourpassword.However,ifyouforgetyourpassword,
consultwithyourdealer.• WhatisPJLink? PJLinkisastandardizationofprotocolusedforcontrollingprojectors
ofdifferentmanufacturers.Thisstandardprotocol isestablishedbyJapanBusinessMachineandInformationSystemIndustriesAssocia-tion(JBMIA)in2005.
TheprojectorsupportsallthecommandsofPJLinkClass1.• SettingofPJLinkwillnotbeaffectedevenwhen[RESET]isdonefrom
themenu.
Upto32alphanumericcharacters
AMXBEACON Turnonoroff fordetection fromAMXDeviceDiscoverywhenconnectingtothenetworksupportedbyAMX’sNetLinxcontrolsystem.
TIP:WhenusingadevicethatsupportsAMXDeviceDiscovery,allAMXNetLinxcontrolsystemwillrecognizethedeviceanddownloadtheappropriateDeviceDiscoveryModulefromanAMXserver.
Placing a checkmark will enable detecting the projector from AMX Device Discovery�Clearing a checkmark will disable detecting the projector from AMX Device Discovery�
—
CRESTRON ROOMVIEW:TurnonoroffwhencontrollingtheprojectorfromyourPC.CRESTRONCONTROL:Turn on or offwhen controlling theprojectorfromyourcontroller.• CONTROLLERIPADDRESS:EnteryourIPaddressofCREST-RONSERVER.• IPID:EnteryourIPIDofCRESTRONSERVER.
Upto12numericcharacters
ExtronXTP SetforconnectingthisprojectortotheExtronXTPtransmitter.PlacingacheckmarkwillenabletoconnectwiththeXTPtrans-mitter.ClearingacheckmarkwilldisabletoconnectwiththeXTPtransmitter.
TIP:TheCRESTRONsettingsarerequiredonlyforusewithCRESTRONROOMVIEW.Formoreinformation,visithttp://www.crestron.com
132
5. Using On-Screen Menu
[SOURCE OPTIONS]
SettingAutoAdjust[AUTOADJUST]ThisfeaturesetstheAutoAdjustmodesothatthecomputersignalcanbeautomaticallyormanuallyadjustedfornoiseandstability.Youcanautomaticallymakeadjustmentintwoways:[NORMAL]and[FINE].
OFF ������������������������ The computer signal will not be automatically adjusted� You can manually optimize the computer signal�NORMAL ���������������� Default setting� The computer signal will be automatically adjusted� Normally select this option�FINE ����������������������� Select this option if fine adjustment is needed� It takes more time to switch to the source than when [NOR-
MAL]is selected�
TIP:• Thedefaultsettingwhenshippedfromthefactoryis[NORMAL].• WhentheAUTOADJ.buttonispressed,thesame[FINE]adjustmentiscarriedout.
[COLORSYSTEM]ThisfeatureallowsyoutoselecttheTVvideosignal,whichdiffersfromcountrytocountry(NTSC,PAL,etc.).Thisissetto[AUTO]byfactorydefault.Setthisiftheprojectorcannotidentifythesignalautomatically.
SelectingDefaultSource[DEFAULTINPUTSELECT]Youcansettheprojectortodefaulttoanyoneofitsinputseachtimetheprojectoristurnedon.
LAST ���������������������� Set the projector to default to the previous or last active input each time the projector is turned on�AUTO ��������������������� Search for an active source in order of HDMI → DisplayPort → BNC → BNC(CV) → BNC(Y/C) → COMPUTER
→ HDBaseT → SLOT and displays the first found source�HDMI ��������������������� Display the digital source from the HDMI IN terminal every time the projector is turned on� DisplayPort ������������ Display the digital source from the DisplayPort IN terminal every time the projector is turned on� BNC ����������������������� Project the input signal from the BNC input terminalBNC(CV) ���������������� Project the input signal from the BNC(CV) input terminal�BNC(Y/C) ��������������� Project the input signal from the BNC(Y/C) input terminal�COMPUTER ����������� Display the computer signal from the COMPUTER IN terminal every time the projector is turned on�HDBaseT ���������������� Project the HDBaseT or WIRED LAN signal�SLOT ���������������������� Project the picture via the optional board (sold separately) inserted into the SLOT�
133
5. Using On-Screen Menu
SettingClosedCaption[CLOSEDCAPTION]ThisoptionsetsseveralclosedcaptionmodesthatallowtexttobesuperimposedontheprojectedimageofVideoorS-Video.Thesubtitlesandtextwillbedisplayedashortwhileaftertheon-screenmenudisappears.
OFF ������������������������ This exits the closed caption mode�CAPTION 1-4 ��������� Text is superimposed�TEXT 1-4 ���������������� Text is displayed�
SelectingaColororLogoforBackground[BACKGROUND]Usethisfeaturetodisplayablue/blackscreenorlogowhennosignalisavailable.Thedefaultbackgroundis[BLUE].
NOTE: • Evenwhenthebackgroundlogoisselected,iftwopicturesaredisplayedin[PIP/PICTUREBYPICTURE]mode,thebluebackground
isdisplayedwithoutthelogowhenthereisnosignal.
134
5. Using On-Screen Menu
[POWER OPTIONS]
SelectingPower-savingin[STANDBYMODE]Settingthepowerconsumptioninthestandbymode.
NORMAL ���������������� In the standby mode, the power consumption of the projector is 0�5 W�In the standby mode, the POWER indicator lights up in red while the STATUS indicator will go off�• Whensetto[NORMAL],thefollowingterminalsandfunctionswillbedisabled.HDMIOUTterminals,
Ethernet/HDBaseT port, LAN function, mail notification functionNETWORK STANDBY ������������������������������ Compared to [NORMAL], the power consumption in the standby mode is higher but power can be supplied
to the projector using a wired LAN�In the standby mode, the power indicator will light up in orange while the status indicator will be turned off�
Important:• When[NETWORKSTANDBY]isselected,[AUTOPOWEROFF]willturngreyincolorandbedisabledand[0:15]willbeselected
automatically.• Inthefollowingconditions,the[STANDBYMODE]settingwillbedisabledandtheprojectorwillgointothesleepmode.Inthe
sleepmode,thefansintheprojectorrotateforthepurposeofinteriorpartsprotection.* Sleepmodereferstothemodewherebythefunctionalrestrictionsduetothe[STANDBYMODE]settingareremoved.• When[ON]isselectedunder[NETWORKSERVICE]→[AMXBEACON]• When[ENABLE]isselectedunder[NETWORKSERVICE]→[CRESTRON]→[CRESTRONCONTROL].• Whenacheckmarkisplacedfor[NETWORKSERVICE]→[ExtronXTP].• When[HDBaseT]isselectedunder[CONTROL]→[REMOTESENSOR]• WhenasignalisbeingreceivedfromaHDBaseTtransmissiondevice
• When[NORMAL]isselected,the[AUTOPOWERONSELECT]displayturnsgreyincolorandisdisabled,and[OFF]isautomati-callyselected.
NOTE:• WhenconnectingtoaHDBaseTtransmissiondevicesoldcommercially,ifthetransmissiondeviceissettotransmitremotecontrol
signals,thepowerconsumptionoftheprojectorinthestandbymodewillincrease.
TIP:• Yoursettingwillnotbeaffectedevenwhen[RESET]isdonefromthemenu.• ThepowerconsumptioninthestandbymodewillnotbeincludedincalculatingCO2emissionreduction.
EnablingDirectPowerOn[DIRECTPOWERON]Turnstheprojectoronautomaticallywhenthepowercordisinsertedintoanactivepoweroutlet.ThiseliminatestheneedtoalwaysusethePOWERbuttonontheremotecontrolorprojectorcabinet.
135
5. Using On-Screen Menu
TurningOntheProjectorByApplyingComputerSignal[AUTOPOWERONSELECT]Ifsetto[NETWORKSTANDBY],theprojectorautomaticallydetectsthesynchronizingsignalinputfromthefollowingselectedterminalsandprojectsthepictureaccordingly:Computer,HDMI,DisplayPort,HDBaseT,andSLOT.
OFF ������������������������ AUTO POWER ON SELECT function will be switch off�HDMI, DisplayPort, COMPUTER, HDBaseT, SLOT ������������������������������ When a computer signal of a selected input terminal is detected, the power supply of the projector will be
turned on automatically and the computer screen will be projected�
NOTE: • IfyouwanttoactivatetheAUTOPOWERONSELECTfunctionafterpoweringOFFtheprojector,interruptthesignalfromtheinput
terminalsordisconnectthecomputercablefromtheprojectorandwaitforatleast3secondsbeforeinputtingthesignalfromtheselectedterminal.WhentheprojectoristurnedoffandentersNETWORKSTANDBYmode,butsignalsfromthecomputercontinuetobesenttheprojector,theprojectormaintainsNETWORKSTANDBYmodeandwillnotturnONautomatically.Inaddi-tion,ifsignalsfromHDMI,DisplayPortorHDBaseTcontinuetobesenttotheprojector,dependingonthesettingsofconnectedexternaldevices,theprojectormayturnONautomaticallyevenifitispoweredoffandNETWORKSTANDBYmodeisineffect.
• ThisfunctiondoesnotworkwhencomponentsignalscomeintoCOMPUTERINterminalorwhencomputersignalsareSynconGreenorCompositeSync.
EnablingPowerManagement[AUTOPOWEROFF]Whenthisoptionisselectedyoucanenabletheprojectortoautomaticallyturnoff(attheselectedtime:0:05,0:10,0:15,0:20,0:30,1:00)ifthereisnosignalreceivedbyanyinputorifnooperationisperformed.
NOTE:• ThepowerwillnotgooffautomaticallywhenasignalfromtheEthernet/HDBaseTportisbeingprojected.• [AUTOPOWEROFF]appearsingreywhenthe[STANDBYMODE]issetto[NETWORKSTANDBY]and[0:15]willbesetautomati-
cally.
UsingOffTimer[OFFTIMER]1. Select your desired time between 30 minutes and 16 hours: OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.
2. Press the ENTER button on the remote control.
3. The remaining time starts counting down.
4. Theprojectorwillturnoffafterthecountdowniscomplete.
NOTE:• Tocancelthepresettime,set[OFF]forthepresettimeorturnoffthepower.• Whentheremainingtimereaches3minutesbeforetheprojectoristurnedoff,the[THEPROJECTORWILLTURNOFFWITHIN3
MINUTES]messagewillbedisplayedonthebottomofthescreen.
SettingfortheOptionalBoard[SLOTPOWER]Whenusingtheoptionalboardinstalledintheslot,setthefollowingoptions.
PROJECTOR ON �����������������Thisfeaturewillturnonoroffthepowertotheoptionalboard.OFF: Forcibly turn off the power to the optional board installed in the slot�ON (Default): Turn on the power to the optional board installed in the slot�
PROJECTOR STANDBY �������Thisfeaturewillautomaticallyenableordisabletheoptionalboardinstalledintheslotwhentheprojectorisinstandby.
DISABLE: Select this option to disable the optional board in the projector standby�ENABLE (Default): Select this option to enable the optional board in the projector standby�
136
5. Using On-Screen Menu
Returning to Factory Default [RESET]TheRESETfeatureallowsyoutochangeadjustmentsandsettingstothefactorypresetfora(all)source(s)exceptthefollowing:
[CURRENTSIGNAL]Resetstheadjustmentsforthecurrentsignaltothefactorypresetlevels.Theitemsthatcanberesetare:[PRESET],[CONTRAST],[BRIGHTNESS],[COLOR],[HUE],[SHARPNESS],[AS-PECTRATIO],[HORIZONTAL],[VERTICAL],[CLOCK],[PHASE],and[OVERSCAN].
[ALLDATA]Resetalltheadjustmentsandsettingsforallthesignalstothefactorypreset.AllitemscanberesetEXCEPT[LANGUAGE],[BACKGROUND],[FILTERMESSAGE],[EDGEBLENDING],[MULTISCREEN],[SCREENTYPE],[GEOMETRICCORRECTION],[REF.WHITEBALANCE],[ADMINISTRATORMODE],[CONTROLPANELLOCK],[SECURITY],[COMMUNICATIONSPEED],[DATEANDTIMESETTINGS],[CONTROLID],[STANDBYMODE],[FANMODE],[LIGHTHOURSUSED],[TOTALCARBONSAVINGS],and[WIREDLAN].
[ALLDATA(INCLUDINGENTRYLIST)]Resetalltheadjustmentsandsettingsforallthesignalstothefactorypresetexcept[LANGUAGE],[BACKGROUND],[FILTERMESSAGE], [EDGEBLENDING], [MULTISCREEN], [SCREENTYPE], [GEOMETRICCORRECTION],[REF.WHITEBALANCE],[ADMINISTRATORMODE],[CONTROLPANELLOCK],[SECURITY],[COMMUNICATIONSPEED],[DATEANDTIMESETTINGS],[CONTROLID],[STANDBYMODE],[FANMODE],[LIGHTHOURSUSED],[TOTALCARBONSAVINGS],and[WIREDLAN].Alsodeletesallthesignalsinthe[ENTRYLIST]andreturnstothefactorypreset.
NOTE:LockedsignalsinEntryListcannotbereset.
137
5. Using On-Screen Menu
❽ Menu Descriptions & Functions [INFO.]Displaysthestatusofthecurrentsignalandlightmoduleusage.Thisitemhasninepages.Theinformationincludedisasfollows:
TIP:PressingtheHELPbuttonontheremotecontrolwillshowthe[INFO.]menuitems.
[USAGE TIME]
[LIGHTHOURSUSED](H)[TOTALCARBONSAVINGS](kg-CO2)
• [TOTALCARBONSAVINGS]
Thisdisplaystheestimatedcarbonsavinginformationinkg.Thecarbonfootprintfactorinthecarbonsavingcal-culationisbasedontheOECD(2008Edition).(→page41)
[SOURCE(1)]
INPUTTERMINAL RESOLUTIONHORIZONTALFREQUENCY VERTICALFREQUENCYSYNCTYPE SYNCPOLARITYSCANTYPE SOURCENAMEENTRYNO.
138
5. Using On-Screen Menu
[SOURCE(2)]
SIGNALTYPE VIDEOTYPEBITDEPTH VIDEOLEVELLINKRATE LINKLANE3DFORMAT
[SOURCE(3)]
INPUTTERMINAL RESOLUTIONHORIZONTALFREQUENCY VERTICALFREQUENCYSYNCTYPE SYNCPOLARITYSCANTYPE SOURCENAMEENTRYNO.
[SOURCE(4)]
SIGNALTYPE VIDEOTYPEBITDEPTH VIDEOLEVELLINKRATE LINKLANE3DFORMAT
139
5. Using On-Screen Menu
[WIRED LAN]
IPADDRESS SUBNETMASKGATEWAY MACADDRESS
[VERSION(1)]
FIRMWARE DATASUB-CPU
[OTHERS]
DATETIME PROJECTORNAMEMODELNO. SERIALNUMBERCONTROLID(when[CONTROLID]isset)
140
5. Using On-Screen Menu
[HDBaseT]
SIGNALQUALITY OPERATIONMODELINKSTATUS HDMISTATUS
141
❶ Mounting a lens (sold separately)Thisprojectorcanbeusedwith8kindsofoptionallenses(soldseparately).ThedescriptionsherearefortheNP18ZL(standardzoom)lens.Mountotherlensesinthesamemanner.Seepage182forlensoptions.Important:• Forusingthefollowingoptionlenses,besuretocarryout[LENSCALIBRATION]afterreplacingthelens.(→ page 18, 118) NP16FL,NP17ZL,NP18ZL,NP19ZL,NP20ZL,NP21ZL,NP31ZL
WARNING:(1)Turnoffthepowerandwaitforthecoolingfantostop,(2)turnoffthemainpowerswitch,(3)disconnectthepowercordandwaitfortheunittocoolbeforemountingorremovingthelens.Failuretodosocanresultineyeinjury,electricshock,orburninjuries.
NOTE:• Theprojectorandlensesaremadeofprecisionparts.Donotsubjectthemtoshockorexcessiveforces.• Removetheseparatelysoldlenswhenmovingtheprojector.Ifnot,thelenscouldbesubjecttoshockwhiletheprojectorisbeing
moved,damagingthelensandthelensshiftmechanism.• Whendismountingthelensfromtheprojector,returnthelenspositiontothehomepositionbeforeturningoffthepower.Failure
todosomaypreventthelensfrombeingmountedordismountedbecauseofnarrowspacebetweentheprojectorandthelens.• Nevertouchthelenssurfacewhiletheprojectorisoperating.• Beverycarefulnottoletdirt,grease,etc.,onthelenssurfaceandnottoscratchthelenssurface.• Performtheseoperationsonaflatsurfaceoverapieceofcloth,etc.,topreventthelensfromgettingscratched.• Whenleavingthelensofftheprojectorforlongperiodsoftime,mountthedustcapontheprojectortopreventdustordirtfrom
gettinginside.Ifthelensremainsdetachedfromtheprojectorforlongperiodsoftime,dustmaycollectwithintheopticalunitanddamagethelens,causingdeteriorationofprojectedimage.
• Lensesotherthanspecifiedinthismanualcannotbemountedonthisprojector.
Mounting the lens1. Removethedustcapfromtheprojector.
Pushthetongueatthetopleftoutwardandpulltheknobatthecenterofthecap.
2. Removethelenscaponthebackofthelens.
• ThelensNP18ZLisusedasanexample.
NOTE: • Makesuretoremovethelenscapattheunitbackside.Ifthelens
unitwiththelenscapremainingonisinstalledontheprojector,itmaycauseofmalfunction.
3. Hold the lens unit aligning the labelled arrow on the unit coming top and insert the unit to the projector.
Insertthelensslowlyallthewayin,keepingthepositioningslitatthesameangle.
Arrowmark
6. Connecting to Other Equipment
142
6. Installation and Connections
4. Turn the lens unit rightward until click is heard.
Thelensisnowfastenedontotheprojector.
TIP:MountingthelenstheftpreventionscrewFastenthelenstheftpreventionscrewincludedwiththeprojectortothebottomoftheprojectorsothatthelenscannotberemovedeasily.
Removing the lens
Beforeremovingthelens:
1. Turn on the projector and display an image. (→ page 17)
2. Press and hold the SHUTTER/HOME POSITION button over 2 seconds.
Thelenspositionwillbemovedtothehomeposition.
3. Turnoffthemainpowerswitch,andthenunplugthepowercord.
4. Wait until the projector cabinet is cool enough to handle.
1. While pressing the LENS release button on the projec-tor’sfrontpanelfullyin,turnthelenscounterclockwise.
Thelenscomesoff.
NOTE:IfthelenscannotberemovedwhentheLENSreleasebuttonispressed,checkwhetherthelenstheftpreventionscrewismounted.
2. Afterslowlypullingthelensofftheprojector,releasetheLENS release button.
- Afterremovingthelens,mountthelenscaps(frontandback)includedwiththelensbeforestoringthelens.
- Ifnolensisgoingtobemountedontheprojector,mountthedustcapincludedwiththeprojector.
143
6. Installation and Connections
❷ Making ConnectionsAcomputercable,BNCcable(5-coretype),HDMIcable,oraDisplayPortcablecanbeusedtoconnecttoacomputer.Theconnectioncableisnotenclosedwiththeprojector.Pleasegetreadyasuitablecablefortheconnection.
Analog RGB signal connection
• Connectthecomputercabletothedisplayoutputterminal(miniD-sub15pin)onthecomputerandtheCOMPUTERINterminalontheprojector.Pleaseuseacomputercableattachedwithaferritecore.
• Whenconnectingthedisplayoutputterminal(miniD-sub15pin)onthecomputertotheBNCinputterminal,useaconversioncabletoconverttheBNCcable(5core)toaminiD-sub15pincable.
• Selectthesourcenameforitsappropriateinputterminalafterturningontheprojector.
InputterminalSOURCEbuttonontheprojector
cabinetButtonontheremotecontrol
COMPUTERIN COMPUTER COMPUTER1
BNC BNC COMPUTER2
COMPUTER IN
BNC IN
Computercable(soldcommercially)
RGB-to-BNCcable(notsupplied)
NOTE:Pleasechecktheoperatingmanualofthecomputerasthename,positionanddirec-tionof the terminalmaydifferdependingonthecomputer.
144
6. Installation and Connections
Digital RGB signal connection
• ConnectacommerciallyavailableHDMIcablebetweenthecomputer’sHDMIoutputterminalandtheprojector’sHDMIINterminal.
• ConnectacommerciallyavailableDisplayPortcablebetweenthecomputer’sDisplayPortoutputterminalandtheprojector’sDisplayPortINterminal.
• Selectthesourcenameforitsappropriateinputterminalafterturningontheprojector.
InputterminalSOURCEbuttonontheprojector
cabinetButtonontheremotecontrol
HDMIIN HDMI HDMI
DisplayPortIN DisplayPort DisplayPort
DisplayPort INHDMI IN
HDMIcable(notsupplied) DisplayPortcable(notsupplied)
145
6. Installation and Connections
CautionswhenconnectinganHDMIcable• UseacertifiedHighSpeedHDMI®CableorHighSpeedHDMI®CablewithEthernet.
Cautions when connecting a DisplayPort cable• UseacertifiedDisplayPortcable.
• Dependingonthecomputer,sometimemayberequireduntiltheimageisdisplayed.
• SomeDisplayPortcables(commerciallyavailable)havelocks.
• Todisconnectthecable,pressthebuttononthetopofthecable’sterminal,thenpullthecableout.
• PowercanbesuppliedtotheconnectingdevicefromtheDisplayPortINterminal(maximumof1.65W).However,powerwillnotbesuppliedtothecomputer.
• WhensignalsfromadevicethatusesasignalconverteradapterareconnectedtotheDisplayPortINterminal,insomecasestheimagemaynotbedisplayed.
• WhentheHDMIoutputofacomputerisconnectedtotheDisplayPortINterminal,useaconverter(commerciallyavailable).
146
6. Installation and Connections
CautionswhenusingaDVIsignal• WhenthecomputerhasaDVIoutputterminal,useacommerciallyavailableconvertercabletoconnectthecom-putertotheprojector’sHDMIINterminal(onlydigitalvideosignalscanbeinput).
HDMI IN
NOTE:WhenViewingaDVIDigitalSignal• Turnoffthepowerofthecomputerandprojectorbeforeconnectingdevices.• Whenavideodeckisconnectedviaascanconverter,etc.,thedisplaymaynotbecorrectduringfast-forwardingandrewinding.• UseaDVI-to-HDMIcablecompliantwithDDWG(DigitalDisplayWorkingGroup)DVI(DigitalVisualInterface)revision1.0stan-
dard.Thecableshouldbewithin197"/5mlong.• TurnofftheprojectorandthePCbeforeconnectingtheDVI-to-HDMIcable.• ToprojectaDVIdigitalsignal:Connectthecables,turntheprojectoron,thenselecttheHDMI.Finally,turnonyourPC. Failuretodosomaynotactivatethedigitaloutputofthegraphicscardresultinginnopicturebeingdisplayed.Shouldthishappen,
restartyourPC.• SomegraphicscardshavebothanalogRGB(15-pinD-Sub)andDVI(orDFP)outputs.Useofthe15-pinD-Subterminalmay
resultinnopicturebeingdisplayedfromthedigitaloutputofthegraphicscard.• DonotdisconnecttheDVI-to-HDMIcablewhiletheprojector isrunning.If thesignalcablehasbeendisconnectedandthen
reconnected,animagemaynotbecorrectlydisplayed.Shouldthishappen,restartyourPC.• TheCOMPUTERINterminalssupportWindowsPlugandPlay.TheBNCinputterminaldoesnotsupportWindowsPlugandPlay.• AMacsignaladapter(commerciallyavailable)mayberequiredtoconnectaMaccomputer. ToconnectaMaccomputerequippedwithaMiniDisplayPorttotheprojector,useacommerciallyavailableMiniDisplayPort→
DisplayPortconvertercable.
147
6. Installation and Connections
HDMI IN
HDMI OUT
Connecting an External Monitor
Youcanconnectaseparate,externalmonitortoyourprojectortosimultaneouslyviewonamonitorthecomputeranalogimageyou’reprojecting.• BNC(CV)componentvideosignalsandBNC(Y/C)S-videosignalswillnotbeoutput.• PleaserefertoPage68whendisplayingthePIP/PBPscreen.
NOTE:• WhenoutputtingHDMIsignals,turnonthepowerofthevideodeviceontheoutputsideandkeepitconnectedbeforeinputting
videosignalsintothisdevice.TheHDMIOUTterminalsoftheprojectorareequippedwithrepeaterfunctions.WhenadeviceisconnectedtotheHDMIOUTterminal,theresolutionoftheoutputsignalislimitedbytheresolutionsupportedbytheconnecteddevice.
• InthecaseoftheHDMIOUTterminaloftheprojector,thetheoreticalnumberofunitsthatcanbeconnectedinaseriesisseven.Themaximumnumberofunitsthatcanbeconnectedmaybereducedbytheexternalenvironmentandqualityofthesignalandcable,etc.ThenumberofunitsthatcanbeconnectedmaydifferdependingontheHDCPversion,restrictiononthenumberofHDCPrepeatersinthesourcedeviceandthequalityofthecable.Theoverallsystemneedstobecheckedinadvancewhenbuild-ingasystem.
• Whenthe[STANDBYMODE]issetto[NORMAL],videowillnotbeoutputiftheprojectorgoesintothestandbymode.Setthemodeto[NETWORKSTANDBY],turnonthepowerofthetransmissiondeviceandkeepitinaconnectedstate.
• Whenthe[STANDBYMODE]ofthisdeviceissetto[NORMAL],HDMIsignalswillnotbeoutput.TooutputHDMIsignals,setthe[STANDBYMODE]to[NETWORKSTANDBY],turnonthepowersupplyofthetransmissiondeviceandkeepitconnected.
• HDMIrepeaterfunctionwillnotbefunctionedifswitchingterminalsandputtingin/pullingouttheHDMIcableisperformedonthe 2nd projector and after.
Computercable(VGA)(notsupplied)
HDMIcable(notsupplied)
148
6. Installation and Connections
Connecting Your Blu-ray Player or Other AV EquipmentComponentvideosignal/S-videosignalconnection
• Selectthesourcenameforitsappropriateinputterminalafterturningontheprojector.
InputterminalSOURCEbuttonontheprojector
cabinetButtonontheremotecontrol
BNC(CV) BNC(CV) VIDEO
BNC(Y/C) BNC(Y/C) S-VIDEO
CV Y C
BNC(CV)
BNC(Y) BNC(C)
BNCcable(notsupplied)
Audioequipment
149
6. Installation and Connections
Connecting Component Input
• Selectthesourcenameforitsappropriateinputterminalafterturningontheprojector.
InputterminalSOURCEbuttonontheprojector
cabinetButtonontheremotecontrol
COMPUTERIN COMPUTER COMPUTER1
BNC BNC COMPUTER2
NOTE:• Whenthesignalformatissetto[AUTO](defaultfactorysettingwhenshipped),thecomputersignalandcomponentsignalare
automatically distinguished and switched. If the signals cannot bedistinguished, select [COMPONENT]under [ADJUST]→ [VIDEO]→[SIGNALTYPE]intheon-screenmenuoftheprojector.
• ToconnecttoavideodevicewithaDterminal,usethesoldseparatelyDterminalconverteradapter(modelADP-DT1E).
COMPUTER IN
15-pin-to-RCA(female)×3cableadapter(ADP-CV1E) BNC(male)-to-RCA(male)conversion
cable×3(soldcommercially)
ComponentvideoRCA×3cable(notsupplied)
Blu-rayplayerAudioEquipment
150
6. Installation and Connections
Connecting HDMI InputYoucanconnecttheHDMIoutputofyourBlu-rayplayer,harddiskplayer,ornotebooktypePCtotheHDMIINterminalofyourprojector.
InputterminalSOURCEbuttonontheprojector
cabinetButtonontheremotecontrol
HDMIIN HDMI HDMI
TIP:ForusersofaudiovideoequipmentwithanHDMIterminal:Select“Enhanced”ratherthan“Normal”ifHDMIoutputisswitchablebetween“Enhanced”and“Normal”.Thiswillprovideimprovedimagecontrastandmoredetaileddarkareas.Formoreinformationonsettings,refertotheinstructionmanualoftheaudiovideoequipmenttobeconnected.
• WhenconnectingtheHDMIINterminaloftheprojectortotheBlu-rayplayer,theprojector’svideolevelcanbemadesettingsinaccordancewiththeBlu-rayplayer’svideolevel.Inthemenuselect[ADJUST]→[VIDEO]→ [VIDEOLEVEL]andmakenecessarysettings.
HDMI IN
Audiocable(notsupplied)
HDMIcable(notsupplied)UseHighSpeedHDMI®Cable.
151
6. Installation and Connections
Connecting a document cameraYoucanconnectadocumentcameraandprojectprinteddocuments,etc.
• Selectthesourcenameforitsappropriateinputterminalafterturningontheprojector.
InputterminalSOURCEbuttonontheprojector
cabinetButtonontheremotecontrol
COMPUTERIN COMPUTER COMPUTER1
BNC(CV) BNC(CV) VIDEO
BNC (CV)
COMPUTER IN
VIDEO
NOTE:• Name,position, anddirectionof ter-
minalsarevarydependingoncameramodel.Pleasecheckuser’smanualofyourcamerafordetails.
BNC(male)andRCA(male)conver-sioncable(notsupplied)
Computercable(notsupplied)
152
6. Installation and Connections
Connecting to a Wired LANTheprojectorcomesstandardwithaEthernet/HDBaseTport(RJ-45)whichprovidesaLANconnectionusingaLANcable.TouseaLANconnection,youarerequiredtosettheLANontheprojectormenu.Select[SETUP]→[NETWORKSETTINGS]→[WIREDLAN].(→page127).
Example of LAN connectionExampleofwiredLANconnection
Ethernet/HDBaseT
Server
Hub
LANcable(notsupplied)
NOTE:UseaCategory5orhigherLANcable.
153
6. Installation and Connections
Connecting to a HDBaseT transmission device (sold commercially)HDBaseTisaconnectionstandardforhomeappliancesthatisestablishedbytheHDBaseTAlliance.UseaLANcablesoldcommerciallytoconnecttheEthernet/HDBaseTportoftheprojector(RJ-45)toaHDBaseTtransmissiondevicesoldcommercially.TheEthernet/HDBaseTportoftheprojectorsupportsHDMIsignals(HDCP)fromtransmissiondevices,controlsignalsfromexternaldevices(serial,LAN)andremotecontrolsignals(IRcommands).
Connection example
Ethernet/HDBaseT
Computer(forcontroluse)Computer(foroutputuse)
Exampleofatransmissiondevice
Remotecontrol
HDMIoutputvideodevice
NOTE:• Pleaseuseashieldedtwistedpair(STP)cableofCategory5eorhigherfortheLANcable(soldcommercially).• ThemaximumtransmissiondistanceovertheLANcableis100m.(themaximumdistanceis70mfora4Ksignal)• Pleasedonotuseothertransmissionequipmentbetweentheprojectorandtransmissionequipment.Thepicturequalitymaybe
deteriorated as a result.• ThisprojectorisnotguaranteedtoworkwithallHDBaseTtransmissiondevicessoldcommercially.
154
6. Installation and Connections
Portrait projection (vertical orientation)Thisprojectorcanbeinstalledverticallytodisplaycomputerimagesinportraitorientation.
Precautions during installation• Pleasedonotinstalltheprojectorinaverticalorientationontopofthefloorortableonitsown.Ifnot,thepro-jectormayfallover,resultingininjury,damageormalfunction.
• Astandforsupportingtheprojectorneedstobemadeforthispurposetokeepintakeairflowsecurelyandpreventivemeasureoffallingover.Thestandmustbedesignedsuchthatthecenterofgravityoftheprojectorislocatedwellwithinthelegsofthestand.Ifnot,theprojectormayfalloverandresultininjury,damageandmalfunction.
• Iftheprojectorisinstalledonwhichtheintakeventfacingdown,opticalpartlifemaybeshorten.
155
6. Installation and Connections
Design and manufacturing conditions for the standPleasehireaninstallationserviceprovider(forafee)forthedesignandmanufactureofacustomizedstandtobeusedforportraitprojection.Pleaseensurethatthedesigncomplieswiththefollowingconditions:
• Thereare3ventilationholesatthebottomoftheprojector.Theseholesshouldremainunobstructed.
• Usethe6screwholesatthebackoftheprojectortosecureittothestand.
Screwholecenterdimension:300×300(pitch=150)mm
Screwholedimensionontheprojector:M4withthemaximumdepth16mm
4ofthelegscanbeunscrewedforremoval.
• Horizontaladjustmentmechanism(forexample,boltsandnutsin4places)
• Pleasedesignthestandsothatitdoesnoteasilytoppleover.
Reference drawings* Thedrawingshowingthedimensionalrequirementsisnotanactualstanddesigndrawing.
300
150 150124.5
[Side View][Front View]
(Unit: mm)
Horizontal adjuster
Air exhaust
6 - M4 bolt
Air intakeAir intake
Air intake
156
6. Installation and Connections
Stacking projectorsTheprojectedimagebrightnesscanbedoubledbygravitystackinguptotwoprojectorswithoutexternalsupport.Thisiscalled“StackingProjection”.2projectorscanbestackedontopofeachotherfor“Stacking”setup.
CAUTION:Aminimumoftwopersonsarerequiredtocarrytheprojector.Otherwisetheprojectormaytumbleordrop,causingpersonalinjury.
NOTE:• Projectorswithdifferentmodelnumberscannotbegravitystacked. Optionallenseswiththesamemodelnumbersmustbeusedforstackingprojection.• Forstackingprojectors,attachthesuppliedfourstackingholderstothetopofthelowerprojector.(→ nextpage)• Itdoesnotsupportoverlayaccuracybystackedprojectors.Preciseimagesassmalltextsanddetailedgraphicscannotbeclearly
read or seen.• Useacommerciallyavailabledistributionamplifiertoboththeprimary(upper)andthesecondary(lower)projectorstodistribute
signal to two outputs of the two projectors.• Notesforstacking
- Askyourservicepersonforsettingupandadjustingprojectors.- Setuptheprojectorsinaplaceorstructureinawaywithsufficientstrengthtosupportthecombinedweightofthetwoprojec-
tors.Thesingleprojectorwithalensweighsuptoapproximately31kg/68lbs.- Topreventtheprojectorsfromfalling,fastentheminawaytowithstandearthquakes.- Doublestackingwillcauseroomtemperaturetoincrease.Ventilatetheroomwell.- Donotattempttostackprojectorsontheceiling.Gravitystackingcannotbedoneontheceiling.- Warmuptheprojectorsforonehourbeforethedesiredprojectionisobtained.- Makesurethatthepositionoftheupperprojectordoesnotexceeditsspecifications.Whensettingupthetwoprojectors,
adjustable height range for the tilt foot on the upper projector is added to the total adjustable range.- Setuptheprojectorssothattheprojectedimageshowsaslittlegeometricdistortionsaspossible.Thelensisdifferentin
geometricdistortionbetweenwide(+)andtele(−)forzoom.- Adjustthehorizontallensshifttothelenscenter.
s
157
6. Installation and Connections
AttachingStackingHoldersAttachthreestackingholderstothreelocationsonthetopofthelowerprojector.
Preparation:ToolsrequiredarePhillipsscrewdriver(plus-head)andfourstackingholderspackagedwiththeprojector.Loosenthetiltfoot(fourlocations)oftheprojector.
1. Removerubbercapsandscrewsatfourlocations.
(1)Useyourtweezersornailtopinchandpulluptherubbercap.
(2)Removethescrewfromasquarehole.(1) (2)
2. Attachthethreestackingholdersatfourlocations.
(1)Placeastackingholderinasquarehole.
(2)UsethescrewremovedatStep1tofixthestackingholderinthesquarehole.
(3)PuttherubbercapremovedatStep1backintothesquarehole.
• Snapthetabsonbothoftherubbercapintotheslitsonbothsidesinthesquarehole.(1) (2) (3)
158
6. Installation and Connections
3. Putanotherprojectoronthefirstprojector.
Puteachtiltfootoftheupperprojectoronthestackingholders(fourlocations).
• Eachtiltfoothasarubber.Placeeachtiltfootrubberonstackingholders(fourlocations).
Footrubber
TIP:• Toremovethestackingholders,performtheabovestepsinreverseorder.
159
7. Maintenance❶ Cleaning the Lens• Turnofftheprojectorbeforecleaning.
• Useablowerorlenspapertocleanthelens,andbecarefulnottoscratchormarthelens.
WARNING• Pleasedonotuseaspraycontainingflammablegastoremovedustattachedtothelens,etc.Doingsomayresultinfires.
• Donotlookintothelenswhiletheprojectorison.Seriousdamagetoyoureyescouldresult.
❷ Cleaning the CabinetTurnofftheprojector,andunplugtheprojectorbeforecleaning.• Useadrysoftclothtowipedustoffthecabinet.
Ifheavilysoiled,useamilddetergent.
• Neverusestrongdetergentsorsolventssuchasalcoholorthinner.
• Whencleaningtheventilationslitsorthespeakerusingavacuumcleaner,donotforcethebrushofthevacuumcleanerintotheslitsofthecabinet.
Vacuumthedustofftheventilationslits.
• Poorventilationcausedbydustaccumulationinventilationopenings(alsoatthebottomoftheprojector)canresultinoverheatingandmalfunction.Theseareasshouldbecleanedregularly.
• Donotscratchorhitthecabinetwithyourfingersoranyhardobjects
• Contactyourdealerforcleaningtheinsideoftheprojector.
NOTE:Donotapplyvolatileagentsuchasinsecticideonthecabinet,thelens,orthescreen.Donotleavearubberorvinylproductinprolongedcontactwithit.Otherwisethesurfacefinishwillbedeterioratedorthecoatingmaybestrippedoff.
160
8. User Supportware❶ Operating Environment for Software Included on CD-ROMNames and Features of Bundled Software Programs
Nameofsoftwareprogram Features
VirtualRemoteTool(Windowsonly)
Whenthecomputerandprojectorareconnectedusinganetwork(wiredLAN),suchoperationsasturningtheprojector’spoweronandoffandswitchingthesignalcanbeperformed.Itisalsopossibletosendanimagetotheprojectorandregisteritasthebackgroundlogo.Oncetheimageisregistered,itcanbelockedtopreventthelogofrombeingoverwritten.
PCControlUtilityPro4PCControlUtilityPro5(forMacOS)
This isasoftwareprogramusedtooperatetheprojector fromthecomputerwhenthecomputerandtheprojectorareconnectedwithLAN.(→page152)• PCControlUtilityPro4canbeusedwithaserialconnection.
NOTE:• ToconnecttheprojectortothenetworkbyusingtheVirtualRemoteTool,PCControlUtilityPro4,PCControlUtilityPro5,please
configurethesettingsof[SETUP]→[NETWORKSETTINGS]intheon-screenmenu(→ page 127).
Download serviceFortheupdateinformationaboutthesesoftwareprogramsandtheiroperatingenvironment,visitourwebsite:URL:http://www.nec-display.com/dl/en/index.html
161
8. User Supportware
❷ Installing Software Program
Installation for Windows software
ThesoftwareprogramsexceptPCControlUtilityPro5supportWindows8.1,Windows8,Windows7,WindowsVista,andWindowsXP.
NOTE:• Toinstalloruninstalleachsoftwareprogram,theWindowsuseraccountmusthave“Administrator”privilege(Windows8.1,
Windows8,Windows7,WindowsVista)or“ComputerAdministrator”privilege(WindowsXP).• Exitallrunningprogramsbeforeinstallation.Ifanotherprogramisrunning,theinstallationmaynotbecompleted.• TorunVirtualRemoteToolorPCControlUtilityPro4onWindows8.1,Windows8,WindowsXPHomeEdition,andWindows
XPProfessional,“Microsoft.NETFrameworkVersion2.0”isrequired.TheMicrosoft.NETFrameworkVersion2.0,3.0or3.5isavailablefromMicrosoft’swebpage.Downloadandinstallitonyourcomputer.
1 InserttheaccompanyingNECProjectorCD-ROMintoyourCD-ROMdrive.
Themenuwindowwillbedisplayed.
TIP:Ifthemenuwindowwillnotbedisplayed,trythefollowingprocedure.ForWindows71. Click“start”onWindows.
2. Click“AllPrograms”→“Accessories”→“Run”.
3. Type your CD-ROM drive name (example:“Q:\”) and“LAUNCHER.EXE” in“Name”. (example: Q:\LAUNCHER.EXE)
4. Click“OK”.
Themenuwindowwillbedisplayed.
162
8. User Supportware
2 Clickasoftwareprogramyouwishtoinstallonthemenuwindow.
Theinstallationwillstart.
• Followtheinstructionsontheinstallerscreenstocompletetheinstallation.
TIP:
Uninstalling a Software ProgramPreparation:Exit thesoftwareprogrambeforeuninstalling.Touninstall thesoftwareprogram, theWindowsuseraccountmusthave“Administrator”privilege(Windows8.1,Windows8,Windows7,andWindowsVista)or“ComputerAdministra-tor”privilege(WindowsXP).
•ForWindows8.1/Windows8/Windows7/WindowsVista1 Click“Start”andthen“ControlPanel”.
TheControlPanelwindowwillbedisplayed.
2 Click“Uninstallaprogram”under“Programs”
The“ProgramsandFeatures”windowwillbedisplayed.
3 Selectthesoftwareprogramandclickit.
4 Click“Uninstall/Change”or“Uninstall”.
•Whenthe“UserAccountControl”windowsisdisplayed,click“Continue”.
Followtheinstructionsonthescreenstocompletetheuninstallation.
•ForWindowsXP1 Click“Start”andthen“ControlPanel”.
TheControlPanelwindowwillbedisplayed.
2 Double-click“Add/RemovePrograms”.
TheAdd/RemoveProgramswindowwillbedisplayed.
3 Clickthesoftwareprogramfromthelistandthenclick“Remove”.
Followtheinstructionsonthescreenstocompletetheuninstallation.
163
8. User Supportware
Using on Mac OS
Step 1: Install PC Control Utility Pro 5 on the computer.
1. InserttheaccompanyingNECProjectorCD-ROMinyourMacCD-ROMdrive.
TheCD-ROMiconwillbedisplayedonthedesktop.
2. Double-clicktheCD-ROMicon.
TheCD-ROMwindowwillbedisplayed.
3. Double-clickthe“MacOSX”folder.
4. Double-click“PCControlUtilityPro5.pkg”.
Theinstallerwillstart.
5. Click“Next”.
“ENDUSERLICENSEAGREEMENT”screenwillbedisplayed.
6. Read“ENDUSERLICENSEAGREEMENT”andclick“Next”.
Theconfirmationwindowwillbedisplayed
7. Click“Iacceptthetermsinthelicenseagreement”.
Followtheinstructionsontheinstallerscreenstocompletetheinstallation.
TIP:
•Uninstallingasoftwareprogram1. Putthe“PCControlUtilityPro5”foldertotheTrashicon.
2. PuttheconfigurationfileofPCControlUtilityPro5totheTrashicon.
• TheconfigurationfileofPCControlUtilityPro5islocatedin“/Users/<yourusername>/ApplicationData/NECProjectorUserSupportware/PCControlUtilityPro5”.
164
8. User Supportware
❸ Operating the Projector Via the LAN (Virtual Remote Tool)Thiswillhelpyouperformoperationssuchasprojector’spoweronoroffandsignalselectionviaaLANconnection.Itisalsousedtosendanimagetotheprojectorandregisteritasthelogodataoftheprojector.Afterregisteringit,youcanlockthelogotopreventitfromchanging.
Control FunctionsPowerOn/Off,signalselection,picturefreeze,picturemute,audiomute,Logotransfertotheprojector,andremotecontroloperationonyourPC.
VirtualRemotescreen
RemoteControlWindow Toolbar
ThissectionprovidesanoutlineofpreparationforuseofVirtualRemoteTool.ForinformationonhowtouseVirtualRemoteTool,seeHelpofVirtualRemoteTool.(→page166)
NOTE:• Logodata(graphics)thatcanbesenttotheprojectorwithVirtualRemoteToolhasthefollowingrestrictions: (OnlyviaserialorLANconnection)
* Filesize:Within256kilobytes* Imagesize:Withintheresolutionoftheprojector* Fileformat:PNG(Fullcolor)
• Logodata(image)sentusingtheVirtualRemoteToolwillbedisplayedinthecenterwiththesurroundingareainblack.• Toputthedefault“NEClogo”backinthebackgroundlogo,youneedtoregisteritasthebackgroundlogobyusingtheimagefile
(\Logo\NEC_logo2015_1920x1200.png)includedonthesuppliedNECProjectorCD-ROM.
165
8. User Supportware
Connect the projector to a LAN.ConnecttheprojectortotheLANbyfollowingtheinstructionsin“ConnectingtoaWiredLAN”(→page152)and“10.ControllingtheProjectorbyUsinganHTTPBrowser”(→page52)
Start Virtual Remote Tool
Start using the shortcut icon• Double-clicktheshortcuticon on the Windows Desktop.
Start from the Start menu• Click[Start]→[AllPrograms]or[Programs]→[NECProjectorUserSupportware]→[VirtualRemoteTool]
→[VirtualRemoteTool].
WhenVirtualRemoteToolstartsforthefirsttime,“EasySetup”windowwillbedisplayed.
The“EasySetup”featureisnotavailableonthismodel.Click“CloseEasySetup”.
Closingthe“EasySetup”windowwilldisplaythe“ProjectorList”window.
Selectyourprojectoryouwishtoconnect.ThiswilldisplaytheVirtualRemotescreen.
NOTE:• When[NORMAL]isselectedfor[STANDBYMODE]fromthemenu,theprojectorcannotbeturnedonvianetworkconnection.
TIP:• TheVirtualRemoteToolscreen(orToolbar)canbedisplayedwithoutdisplaying“EasySetup”window. Todoso,clicktoplaceacheckmarkfor“ DonotuseEasySetupnexttime”onthescreen.
166
8. User Supportware
ExitingVirtualRemoteTool1 ClicktheVirtualRemoteToolicon on the Taskbar.
Thepop-upmenuwillbedisplayed.
2 Click“Exit”.
TheVirtualRemoteToolwillbeclosed.
ViewingthehelpfileofVirtualRemoteTool•Displayingthehelpfileusingthetaskbar1 ClicktheVirtualRemoteToolicon onthetaskbarwhenVirtualRemoteToolisrunning.
Thepop-upmenuwillbedisplayed.
2. Click“Help”.
TheHelpscreenwillbedisplayed.
•DisplayingthehelpfileusingtheStartMenu.1. Click“Start”.“Allprograms”or“Programs”.“NECProjectorUserSupportware”.“VirtualRemoteTool”.and
then“VirtualRemoteToolHelp”inthisorder.
TheHelpscreenwillbedisplayed.
167
8. User Supportware
❹ Controlling the Projector over a LAN (PC Control Utility Pro 4/Pro 5)Usingtheutilitysoftware“PCControlUtilityPro4”or“PCControlUtilityPro5”includedonthecompanionNECPro-jectorCD-ROM,theprojectorcanbecontrolledfromacomputeroveraLAN.PCControlUtilityPro4isaprogramcompatiblewithWindows.(→thispage)PCControlUtilityPro5isaprogramcompatiblewithMacOS.(→page170)
Control FunctionsPowerOn/Off,signalselection,picture freeze,picturemute,audiomute,adjusting,errormessagenotification,eventschedule.
ScreenofPCControlUtilityPro4
ThissectionprovidesanoutlineofpreparationforuseofPCControlUtilityPro4/Pro5.ForinformationonhowtousePCControlUtilityPro4/Pro5,seeHelpofPCControlUtilityPro4/Pro5.(→page169,170)
Step1:InstallPCControlUtilityPro4/Pro5onthecomputer.Step2:ConnecttheprojectortoaLAN.Step3:StartPCControlUtilityPro4/Pro5.
TIP:• PCControlUtilityPro4canbeusedwithaserialconnection.
Using on Windows
Step 1: Install PC Control Utility Pro 4 on the computer
NOTE:• Toinstalloruninstalltheprogram,theWindowsuseraccountmusthave[Administrator]privilege(Windows8.1,Windows8,
Windows7,WindowsVistaandWindowsXP)• Exitallrunningprogramsbeforeinstallation.Ifanotherprogramisrunning,theinstallationmaynotbecompleted.
1 InserttheaccompanyingNECProjectorCD-ROMintoyourCD-ROMdrive.
Themenuwindowwillbedisplayed.
168
8. User Supportware
TIP:Ifthemenuwindowwillnotbedisplayed,trythefollowingprocedure.ForWindows7:1. Click“start”onWindows.
2. Click“AllPrograms”→“Accessories”→“Run”.
3. Type your CD-ROM drive name (example:“Q:\”) and“LAUNCHER.EXE” in“Name”. (example: Q:\LAUNCHER.EXE)
4. Click“OK”.
themenuwindowwillbedisplayed.
2 Click“PCControlUtilityPro4”onthemenuwindow.
Theinstallationwillstart.
Whentheinstallationiscomplete,theWelcomewindowwillbedisplayed.
3 Click“Next”.
“ENDUSERLICENSEAGREEMENT”screenwillbedisplayed.
Read“ENDUSERLICENSEAGREEMENT”carefully.
4 Ifyouagree,click“Iacceptthetermsinthelicenseagreement”andthenclick“Next”.
• Followtheinstructionsontheinstallerscreenstocompletetheinstallation.
• Whentheinstallationiscomplete,youwillreturntothemenuwindow.
TIP:•UninstallingPCControlUtilityPro4TouninstallPCControlUtilityPro4,dothesameproceduresstatedasin“UninstallingaSoftwareProgram”.(→ page 162, 163)
169
8. User Supportware
Step 2: Connect the projector to a LAN.ConnecttheprojectortotheLANbyfollowingtheinstructionsin“ConnectingtoaWiredLAN”(→page152)and“10.ControllingtheProjectorbyUsinganHTTPBrowser”(→page52)
Step 3: Start PC Control Utility Pro 4Click“Start”→“Allprograms”or“Programs”→“NECProjectorUserSupportware”→“PCControlUtilityPro4”→ “PCControlUtilityPro4”.
NOTE: • FortheSchedulefunctionofthePCControlutilityPro4towork,youmusthaveyourcomputerrunningandnotinstandby/
sleepmode.Select“PowerOptions”fromthe“ControlPanel”inWindowsanddisableitsstandby/sleepmodebeforerunningthescheduler.
[Example]ForWindows7:Select“ControlPanel”→“SystemandSecurity”→“PowerOptions”→“Changewhenthecomputersleeps”→“Putthecomputertosleep”→“Never”.NOTE: • When[NORMAL]isselectedfor[STANDBYMODE]fromthemenu,theprojectorcannotbeturnedonviathenetwork(wiredLAN)
connection.
TIP:
ViewingtheHelpofPCControlUtilityPro4• DisplayingtheHelpfileofPCControlUtilityPro4whileitisrunning.
Click“Help(H)”→“Help(H)…”ofwindowofPCControlUtilityPro4inthisorder.
Thepop-upmenuwillbedisplayed.
• DisplayingthehelpfileusingtheStartMenu.
Click“Start”→“Allprograms”or“Programs”→“NECProjectorUserSupportware”→“PCControlUtilityPro4”→ “PCControlUtilityPro4Help”.
TheHelpscreenwillbedisplayed.
170
8. User Supportware
Using on Mac OS
Step 1: Install PC Control Utility Pro 5 on the computer1. InserttheaccompanyingNECProjectorCD-ROMinyourMacCD-ROMdrive.
TheCD-ROMiconwillbedisplayedonthedesktop.
2. Double-clicktheCD-ROMicon.
TheCD-ROMwindowwillbedisplayed.
3. Double-clickthe“MacOSX”folder.
4. Double-click“PCControlUtilityPro5.pkg”.
Theinstallerwillstart.
5. Click“Next”.
“ENDUSERLICENSEAGREEMENT”screenwillbedisplayed.
6. Read“ENDUSERLICENSEAGREEMENT”andclick“Next”.
Theconfirmationwindowwillbedisplayed
7. Click“Iacceptthetermsinthelicenseagreement”.
Followtheinstructionsontheinstallerscreenstocompletetheinstallation.
Step 2: Connect the projector to a LANConnecttheprojectortotheLANbyfollowingtheinstructionsin“ConnectingtoaWiredLAN”(→page152)and“10.ControllingtheProjectorbyUsinganHTTPBrowser”(→page52)
Step 3: Start PC Control Utility Pro 51. OpenyourApplicationsfolderinMacOS.
2. Clickthe“PCControlUtilityPro5”folder.
3. Clickthe“PCControlUtilityPro5”icon.
PCControlUtilityPro5willstart.
NOTE: • FortheSchedulefunctionofthePCControlutilityPro5towork,youmusthaveyourcomputerrunningandnotinsleepmode.
Select“EnergySaver”fromthe“SystemPreferences”inMacanddisableitssleepmodebeforerunningthescheduler.• When[NORMAL]isselectedfor[STANDBYMODE]fromthemenu,theprojectorcannotbeturnedonviathenetwork(wiredLAN)
connection. TIP:
ViewingtheHelpofPCControlUtilityPro5•DisplayingtheHelpfileofPCControlUtilityPro5whileitisrunning.• Fromthemenubar,click“Help”→“Help”inthisorder.
TheHelpscreenwillbedisplayed.
•DisplayingtheHelpusingtheDock1. Open“ApplicationFolder”inMacOS.
2. Clickthe“PCControlUtilityPro5”folder.
3. Clickthe“PCControlUtilityPro5Help”icon.
TheHelpscreenwillbedisplayed.
171
9. Appendix
❶ Throw distance and screen sizeThisprojectorcanbeusedwith8kindsofoptionallenses(soldseparately).Refertotheinformationonthispageandusealenssuitedfortheinstallationenvironment(screensizeandthrowdistance).Forinstructionsonmountingthelens,seepage141.
Lens types and throw distance
Applicablelensunit:NP16FL/NP17ZL/NP18ZL/NP19ZL/NP20ZL/NP21ZL/NP31ZL
Screensize Lensunitmodelnameinch NP16FL NP31ZL NP17ZL NP18ZL NP19ZL NP20ZL NP21ZL40 0.6- 0.8 50 0.8 0.8 - 1.0 1.3 - 1.9 1.8 - 2.4 2.4- 4.0 3.8 - 5.8 5.6- 8.960 1.0 1.0 - 1.2 1.6- 2.3 2.2- 2.9 2.8- 4.8 4.6- 7.0 6.8- 10.780 1.3 1.3 - 1.6 2.2- 3.1 3.0 - 3.9 3.8 - 6.4 6.2- 9.3 9.1- 14.4
100 1.7 1.6- 2.0 2.7- 3.9 3.7- 4.9 4.8- 8.0 7.7- 11.7 11.5 - 18.1 120 2.0 2.0- 2.5 3.3 - 4.7 4.5- 5.9 5.8 - 9.6 9.3- 14.1 13.8 - 21.7150 2.5 2.5- 3.1 4.1- 5.8 5.6- 7.4 7.2- 12.0 11.7- 17.6 17.4- 27.3200 3.4 3.3 - 4.1 5.5 - 7.8 7.5- 9.9 9.7- 16.1 15.6- 23.5 23.3- 36.4240 4.1 4.0- 5.0 6.6- 9.4 9.1- 11.9 11.6- 19.3 18.8 - 28.3 28.0- 43.8300 5.1 5.0 - 6.2 8.2- 11.7 11.3 - 14.9 14.5- 24.1 23.5- 35.4 35.0 - 54.8350 5.8 - 7.3400 6.6- 8.3 450 7.5- 9.4500 8.3 - 10.4
TIPCalculationofthethrowdistancefromthescreensizeNP16FLlensthrowdistance(m)=H×0.8:0.8m(min.)to5.1m(max.)NP17ZLlensthrowdistance(m)=H×1.3toH×1.8:1.3m(min.)to11.7m(max.)NP18ZLlensthrowdistance(m)=H×1.7toH×2.3:1.8m(min.)to14.9m(max.)NP19ZLlensthrowdistance(m)=H×2.2toH×3.7:2.4m(min.)to24.1m(max.)NP20ZLlensthrowdistance(m)=H×3.6toH×5.4:3.8m(min.)to35.4m(max.)NP21ZLlensthrowdistance(m)=H×5.3toH×8.3:5.6m(min.)to54.8m(max.)NP31ZLlensthrowdistance(m)=H×0.8toH×0.9:0.6m(min.)to10.4m(max.)“H”(Horizontal)referstothescreenwidth.*Figuresdifferbyseveral%withthetableabovebecausethecalculationisapproximate.Ex.:Throwdistancewhenprojectingona150"screenusingtheNP18ZLlens:Accordingtothe“ScreenSize(forreference)”table(→ page 173),H(screenwidth)=127.2"/323.1cm.Thethrowdistanceis323.1cm×1.7to323.1cm×2.3=549.3cmto743.13cm(becauseofthezoomlens).
172
9. Appendix
Projection range for the different lenses
50-300"40-500"
50-300"
50-300" 50-300" 50-300"
0.8–5.1 mNP16FL :
NP17ZL: 1.3–11.7 m
NP31ZL: 0.6–10.4 m
NP18ZL: 1.8–14.9 m
NP19ZL: 2.4–24.1 m
NP20ZL: 3.8–35.4 m
NP21ZL: 5.6–54.8 m
50-300"
Applicablelensunit:NP39ML
Screensize(inch)
ThrowdistanceL1(m)
L2(m) H1(m) H2(m)
100 0.82 -0.024 2.05 0.71120 0.97 0.13 2.43 0.81150 1.20 0.35 3.00 0.98200 1.57 0.73 3.95 1.26250 1.95 1.11 4.90 1.54300 2.33 1.49 5.85 1.81350 2.71 1.87 6.81 2.09
TIPCalculationofthethrowdistancefromthescreensizeNP39MLlensthrowdistance(m)=H×0.38:0.8m(min.)to2.7m(max.)“H”(Horizontal)referstothescreenwidth.* Figuresdifferbyseveral%withthetableabovebecausethe
calculationisapproximate.
L1
H1
H2
L2
Screen face
Screen center
Projector rear face
Center of the lens unit projection window
Projector bottom face(In the condition the tilt foot is not
lengthen)
[Throw distance]
Screen bottom end
Screen top end
173
9. Appendix
Tables of screen sizes and dimensions
Screenheight
Screenwidth
16:10screensize (diagonal)
Size(inches) Screenwidth Screenheight
(inches) (cm) (inches) (cm)
40 33.9 86.2 21.2 53.860 50.9 129.2 31.8 80.880 67.8 172.3 42.4 107.7
100 84.8 215.4 53.0 134.6120 101.8 258.5 63.6 161.5150 127.2 323.1 79.5 201.9200 169.6 430.8 106.0 269.2240 203.5 516.9 127.2 323.1300 254.4 646.2 159.0 403.9400 339.2 861.6 212.0 538.5500 424.0 1077.0 265.0 673.1
174
9. Appendix
Lens shifting rangeThisprojectorisequippedwithalensshiftfunctionforadjustingthepositionoftheprojectedimagebyusingtheLENSSHIFTbuttons(→page23).Thelenscanbeshiftedwithintherangeshownbelow.
NOTE: • Pleasedonotusethelensshiftfunctionwhenprojectingportraitimages.Pleaseuseitwiththelensinthecenterwhenoneamong
thelensunits,NP16FL,NP17ZL,NP18ZL,NP19ZL,NP20ZL,NP21ZLorNP31ZLisfixedon.ForusingthelensunitNP39ML,select[TYPE]for[LENSPOSITION]in[INSTALLATION(2)]in[SETUP]ontheonsceenmenuformovingthelensattheappropriateposition.
Legend:V“Vertical”referstothescreenheightandH“Horizontal”referstothescreenwidth.Thelensshiftrangeisexpressedasaratioofheightandwidth,respectively.
100%V
50%V
30%V
100%H
20%H
10%H
10%H
20%H
Heightofprojectedimage
Widthofprojectedimage
* Thelensshiftrangeisthesameforceilinginstallation.
(Example)Whenusingtoprojectona150"screenAccordingtothe“Tableofscreensizesanddimensions”(→page173),H=127.2"/323.1cm,V=79.5"/201.9cm.Adjustment range in the vertical direction: the projected image canbemovedupwards 0.5× 79.5"/201.9 cm≈ 39.8"/101cm,downwardsapproximately39.8"/101cm(whenthelensisatthecenterposition).Adjustmentrangeinthehorizontaldirection:theprojectedimagecanbemovedtotheleft0.15×127.2"/323.1cm≈19.1"/48cm,totherightapproximately19.1"/48cm.* Figuresdifferbyseveral%becausethecalculationisapproximate.
175
9. Appendix
❷ Mounting the Optional Board (sold separately)CAUTIONBeforemountingorremovingtheoptionalboard,besuretoturnofftheprojector,waitforthefanstostopandturnoffthemainpowerswitch.
Toolneeded:Phillipsscrewdriver(plus-head)
1. Turnoffthemainpowerswitchoftheprojector.
2. LoosenthetwoscrewsontheSLOTcoveroftheterminals.
RemovethetwoscrewsandtheSLOTcover.
NOTE: • Keepthetwoscrewsandtheslotcover.
3. Insert the optional board into the slot.
Makesurethattheboardisinsertedintotheslotinthecorrectorientation.
Incorrect orientation may cause miscommunicationbetweentheoptionalboardandprojector.
176
9. Appendix
4. Tightenthetwoscrewsonbothsidesoftheslot.
• Besuretotightenthescrews.
Thiswillcompleteinstallationoftheoptionalboard.
Toselecttheoptionalboardsource,selectSLOTastheinput.
NOTE:• Mountingtheoptionalboardmaycausethefanstoruninthestandbymodeforthepurposeofcoolingdependingontheoptional
board.Thefanspeedmayalsoincreaseinordertocooltheprojectorproperly.Bothoftheseinstancesareconsiderednormalandnotamalfunctionoftheprojector.
177
9. Appendix
❸ Compatible Input Signal ListAnalog Computer Signal
Signal Resolution(dots) AspectRatio RefreshRate(Hz)VGA 640 × 480 4 : 3 60/72/75/85/iMacSVGA 800 × 600 4 : 3 56/60/72/75/85/iMacXGA 1024 × 768 4 : 3 60/70/75/85/iMacXGA+ 1152 × 864 4 : 3 60/70/75/85
WXGA
1280 × 768 15 : 9 601280 × 800 16 : 10 601360 × 768 *1 16 : 9 601366 × 768 *1 16 : 9 60
Quad-VGA 1280 × 960 4 : 3 60/75/85SXGA 1280 × 1024 5 : 4 60/75/85SXGA+ 1400 × 1050 4 : 3 60/75WXGA+ 1440 × 900 16 : 10 60WXGA++ 1600 × 900 16 : 9 60UXGA 1600 × 1200 *2 4 : 3 60/65/70/75WSXGA+ 1680 × 1050 16 : 10 60WUXGA 1920 × 1200 *2 16 : 10 60(ReducedBlanking)2K 2048 × 1080 17 : 9 60FullHD 1920 × 1080 *2 16 : 9 60MAC13" 640 × 480 4 : 3 67MAC16" 832 × 624 4 : 3 75MAC19" 1024 × 768 4 : 3 75MAC21" 1152 × 870 *3 4 : 3 75MAC23" 1280 × 1024 5 : 4 65
ComponentSignal Resolution(dots) AspectRatio RefreshRate(Hz)
HDTV(1080p) 1920 × 1080 16 : 9 50/60HDTV(1080i) 1920 × 1080 16 : 9 50/60HDTV(720p) 1280 × 720 16 : 9 50/60SDTV(480p) 720 × 480 4:3/16:9 60SDTV(576p) 720 × 576 4:3/16:9 50SDTV(480i) 720 × 480 4:3/16:9 60SDTV(576i) 720 × 576 4:3/16:9 50
CompositeVideo/S-VideoSignal AspectRatio RefreshRate(Hz)
NTSC 4 : 3 60PAL 4 : 3 50PAL60 4 : 3 60SECAM 4 : 3 50
178
9. Appendix
HDMISignal Resolution(dots) AspectRatio RefreshRate(Hz)
VGA 640 × 480 4 : 3 60SVGA 800 × 600 4 : 3 60XGA 1024 × 768 4 : 3 60HD 1280 × 720 16 : 9 60
WXGA1280 × 768 15 : 9 601280 × 800 16 : 10 601366 × 768 *1 16 : 9 60
Quad-VGA 1280 × 960 4 : 3 60SXGA 1280 × 1024 5 : 4 60SXGA+ 1400 × 1050 4 : 3 60WXGA+ 1440 × 900 16 : 10 60WXGA++ 1600 × 900 16 : 9 60WSXGA+ 1680 × 1050 16 : 10 60UXGA 1600 × 1200 *2 4 : 3 60FullHD 1920 × 1080 *2 16 : 9 60WUXGA 1920 × 1200 *2 16 : 10 60(ReducedBlanking)2K 2048 × 1080 17 : 9 60WQHD iMac27"
2560 × 1440 16 : 9 60
WQXGA 2560 × 1600 16 : 10 60(ReducedBlanking)
4K3840 × 2160 16 : 9 23.98/24/25/29.97/304096 × 2160 17 : 9 24
HDTV(1080p) 1920 × 1080 16 : 9 50/60HDTV(1080i) 1920 × 1080 16 : 9 50/60HDTV(720p) 1280 × 720 16 : 9 50/60SDTV(480i/p) 720/1440 × 480 4:3/16:9 60SDTV(576i/p) 720/1440 × 576 4:3/16:9 50
HDMI3DSignalResolution(dots) RefreshRate(Hz) AspectRatio 3DFormat
1920 × 1080p23.98/24
16 : 9
FramePackingTopandBottom
50 SideBySide59.94/60 SideBySide
1920 × 1080i50 SideBySide
59.94/60 SideBySide
1280 × 720p
50FramePackingSideBySideTopandBottom
59.94/60FramePackingSideBySideTopandBottom
179
9. Appendix
DisplayPortSignal Resolution(dots) AspectRatio RefreshRate(Hz)
VGA 640 × 480 4 : 3 60SVGA 800 × 600 4 : 3 60XGA 1024 × 768 4 : 3 60HD 1280 × 720 16 : 9 60
WXGA1280 × 768 15 : 9 601280 × 800 16 : 10 601366 × 768 *1 16 : 9 60
Quad-VGA 1280 × 960 4 : 3 60SXGA 1280 × 1024 5 : 4 60SXGA+ 1400 × 1050 4 : 3 60WXGA+ 1440 × 900 16 : 10 60WXGA++ 1600 × 900 16 : 9 60WSXGA+ 1680 × 1050 16 : 10 60UXGA 1600 × 1200 *2 4 : 3 60FullHD 1920 × 1080 *2 16 : 9 60WUXGA 1920 × 1200 *2 16 : 10 60(ReducedBlanking)2K 2048 × 1080 17 : 9 60WQHD iMac27"
2560 × 1440 16 : 9 60
WQXGA 2560 × 1600 16 : 10 60(ReducedBlanking)
4K3840 × 2160 16 : 9 23.98/24/25/29.97/304096 × 2160 17 : 9 24
HDTV(1080p) 1920 × 1080 16 : 9 50/60HDTV(1080i) 1920 × 1080 16 : 9 50/60HDTV(720p) 1280 × 720 16 : 9 50/60SDTV(480i/p) 720/1440 × 480 4:3/16:9 60SDTV(576i/p) 720/1440 × 576 4:3/16:9 50
DisplayPort 3DSignalResolution(dots) RefreshRate(Hz) AspectRatio 3DFormat
1920 × 1080p
23.98/24
16 : 9
SideBySideTopandBottom
25SideBySideTopandBottom
50SideBySideTopandBottom
59.94/60SideBySideTopandBottom
1920 × 1080i50
TopandBottomSideBySide
59.94/60TopandBottomSideBySide
1280 × 720p
50SideBySideTopandBottom
59.94/60FramePackingSideBySideTopandBottom
*1 Theprojectormayfailtodisplaythesesignalscorrectlywhen[AUTO]isselectedfor[ASPECTRATIO]intheon-screenmenu. Thefactorydefaultis[AUTO]for[ASPECTRATIO].Todisplaythesesignals,select[16:9]for[ASPECTRATIO].*2 Nativeresolution*3 Theprojectormayfailtodisplaythesesignalscorrectlywhen[AUTO]isselectedfor[ASPECTRATIO]intheon-screenmenu. Thefactorydefaultis[AUTO]for[ASPECTRATIO].Todisplaythesesignals,select[4:3]for[ASPECTRATIO].
• Signalsexceedingtheprojector’sresolutionarehandledwithAdvancedAccuBlend.• WithAdvancedAccuBlend,thesizeofcharactersandruledlinesmaybeunevenandcolorsmaybeblurred.• Uponshipment,theprojectorissetforsignalswithstandarddisplayresolutionsandfrequencies,butadjustmentsmayberequireddependingonthetypeofcomputer.
180
9. Appendix
❹ SpecificationsModelname PX803UL-WH/PX803UL-BKMethod SingleDLP®chipSpecificationsofmainparts
DMDpanel Size 0.67"(aspectratio:16:10)Pixels(*1) 2,304,000(1920dots×1200lines)
Projectionlenses Pleaserefertothespecificationsofoptionlens(→page182)Lightsource LaserDiodeOpticaldevice Opticalisolationbydichroicmirror,combiningbydichroicprism
Lightoutput(*2) (*3) 8,000lmContrastratio(*2)(allwhite/allblack) 10,000:1withdynamiccontrastScreensize(throwdistance) Pleaserefertothespecificationsofoptionlens(→page182)Colorreproducibility 10-bitcolorprocessing(approx.1.07billioncolors)Scanningfrequency Horizontal Analog:15kHz,24to100kHz(24kHzorgreaterforRGBinputs),conformingto
VESAstandardsDigital:15kHz,24to153kHz,conformingtoVESAstandards
Vertical Analog:48Hz,50to85Hz,100,120HzconformingtoVESAstandardsDigital:24,25,30,48Hz,50to85Hz,100,120HzconformingtoVESAstandards
Mainadjustmentfunctions Powerzoom,powerfocus,powerlensshift,inputsignalswitching(HDMI/DisplayPort/BNC/BNC(CV)/BNC(Y/C)/COMPUTER/HDBaseT/SLOT),autoimageadjustment,pic-turemaginification,muting(video),poweron/standby,on-screendisplay/selection,etc.
Max.displayresolution(horizontal×vertical)
Analog:1920×1200(handledwithAdvancedAccuBlend)Digital:4096×2160(handledwithAdvancedAccuBlend)
InputsignalsR,G,B,H,V RGB:0.7Vp-p/75Ω
Y:1.0Vp-p/75Ω(withNegativePolaritySync)Cb,Cr(Pb,Pr):0.7Vp-p/75ΩH/VSync:4.0Vp-p/TTLCompositeSync:4.0Vp-p/TTLSynconG:1.0Vp-p/75Ω(withSync)
Compositevideo 1.0Vp-p/75ΩS-Video Y:1.0Vp-p/75Ω
C:286Vp-p/75ΩComponent Y:1.0Vp-p/75Ω(withSync)
Cb,Cr(Pb,Pr):0.7Vp-p/75ΩDTV:480i,480p,720p,1080i,1080p(60Hz)
576i,576p,720p,1080i,1080p(50Hz)DVD:Progressivesignal(50/60Hz)
Input/outputterminalsComputer/Com-ponent
Videoinput MiniD-Sub15-pin×1,BNCterminal×5
HDMI Videoinput HDMI®TerminaltypeA×1DeepColor(colordepth):8-/10-/12-bitcompatibleColorimetry:RGB,YcbCr444andYcbCr422compatibleLipSynccompatible,HDCPcompatible(*4),Supports4Kand3D
Videooutput RepeaterAudioinput HDMI:Samplingfrequency–32/44.1/48kHz,Samplingbits–16/20/24bits
HDBaseT Videoinput DeepColor(colordepth):Support8/10/12bitsColorimetry:SupportRGB,YCbCr444andYCbCr422SupportLipSync,HDCP(*4),4K,3D
Audioinput Samplingfrequency:32/44.1/48kHzSamplingbit:16/20/24bit
DisplayPort Videoinput DisplayPort×1Datarate:2.7Gbps/1.62GbpsNo.lanes:1lane/2lanes/4lanesColordepth:6-bit,8-bit,10-bitColorimetry:RGB,YcbCr444andYcbCr422compatibleHDCPcompatible(*4)
Audioinput DisplayPort:Samplingfrequency–32/44.1/48kHz,Samplingbits–16/20/24bitsBNC(CV) Videoinput BNC×1BNC(Y/C) Videoinput BNC×2PCcontrolterminal D-Sub9-pin×1USBport USBtypeA×1,USBtypeB×1(Forserviceonly)Ethernet/HDBaseTport RJ-45×1,SupportsBASE-TXRemoteterminal Stereominijack×13DSYNCoutputterminal 5V/10mA,synchronizedsignaloutputfor3Duse
181
9. Appendix
Modelname PX803UL-WH/PX803UL-BKUsageenvironment(*5) Operatingtemperature:41to104°F(5to40°C)
Operatinghumidity:20to80%(withnocondensation)Storagetemperature:14to140°F(-10to60°C)Storagehumidity:20to80%(withnocondensation)Operatingaltitude:0to3000m/10,000feet
Powersupply 100-240VAC,50/60HzPowercon-sumption
LIGHTMODE
NORMAL 874W(100-130V)/850W(200-240V)ECO1 695W(100-130V)/680W(200-240V)ECO2 456W(100-130V)/446W(200-240V)
STAND-BYMODE
NORMAL 0.18W(100-130V)/0.27W(200-240V)NETWORKSTANDBY
4.3W(100-130V)/4.4W(200-240V)
Ratedinputcurrent 9.6A-4.0AExternaldimensions 19.7"(width)×8.3"(height)×22.7"(depth)/500(width)×211(height)×577(depth)
mm(notincludingprotrudingparts)19.7"(width)×8.5"(height)×23.0"(depth)/500(width)×216(height)×583(depth)mm(includingprotrudingparts)
Weight 61.7lbs/28kg(notincludinglens)
*1 Effectivepixelsaremorethan99.99%.*2 Thisisthelightoutputvaluethatresultsfromsettingthe[LIGHTMODE]to[NORMAL]andsettingthe[PRESET]to[HIGH-BRIGHT]whileusingtheNP18ZLlens(soldseparately).
Thelightoutputvalueislowerwhensettingthe[LIGHTMODE]to[ECO1]or[ECO2].([ECO1]:about80%,[ECO2]:about50%).Ifanyothermodeisselectedasthe[PRESET]mode,thelightoutputvaluemaydropslightly.
*3 CompliancewithISO21118-2012*4 HDMI®(DeepColor,LipSync)withHDCP WhatisHDCP/HDCPtechnology? HDCPisanacronymforHigh-bandwidthDigitalContentProtection.HighbandwidthDigitalContentProtection(HDCP)isasystemforpreventingillegalcopyingofvideodatasentoveraHigh-DefinitionMultimediaInterface(HDMI).
IfyouareunabletoviewmaterialviatheHDMIinput,thisdoesnotnecessarilymeantheprojectorisnotfunctioningproperly.WiththeimplementationofHDCP,theremaybecasesinwhichcertaincontentisprotectedwithHDCPandmightnotbedisplayedduetothedecision/intentionoftheHDCPcommunity(DigitalContentProtection,LLC).
Video:DeepColor;8/10/12-bit,LipSync Audio:LPCM;upto2ch,samplerate32/44.1/48KHz,samplebit;16/20/24-bit*5 Dependingonthealtitudeandtemperature,theprojectorgoesinto“ForcedECOMODE”.• Thesespecificationsandtheproduct’sdesignaresubjecttochangewithoutnotice.
Foradditionalinformationvisit:US:http://www.necdisplay.com/Europe:http://www.nec-display-solutions.com/Global:http://www.nec-display.com/global/index.htmlForinformationonouroptionalaccessories,visitourwebsiteorseeourbrochure.
182
9. Appendix
Optionlens(soldseparately)
NP16FL Powerfocusthrowratio0.76:1,F1.85,f=11.6mmImageSize(Diagonal):50–300inches/1.27–7.62mProjectionDistance(Min.–Max.):0.81–5.08m
NP17ZL Powerzoomandfocusthrowratio1.25–1.79:1,F1.85–2.5,f=18.7–26.5mmImageSize(Diagonal):50–300inches/1.27–7.62mProjectionDistance(Min.–Max.):1.33–11.74m
NP18ZL Powerzoomandfocusthrowratio1.73–2.27:1,F1.64–1.86,f=25.7–33.7mmImageSize(Diagonal):50–300inches/1.27–7.62mProjectionDistance(Min.–Max.):1.83–14.88m
NP19ZL Powerzoomandfocusthrowratio2.22–3.67:1,F1.86–2.48,f=32.91–54.23mmImageSize(Diagonal):50–300inches/1.27–7.62mProjectionDistance(Min.–Max.):2.36–24.13m
NP20ZL Powerzoomandfocusthrowratio3.6–5.4:1,F1.85–2.41,f=52.8–79.1mmImageSize(Diagonal):50–300inches/1.27–7.62mProjectionDistance(Min.–Max.):3.80–35.36m
NP21ZL Powerzoomandfocusthrowratio5.3–8.3:1,F1.85–2.48,f=78.5–121.9mmImageSize(Diagonal):50–300inches/1.27–7.62mProjectionDistance(Min.–Max.):5.60–54.81m
NP31ZL Powerzoomandfocusthrowratio0.75–0.93:1,F1.96–2.3,f=11.3–14.1mmImageSize(Diagonal):40–500inches/1.02–12.7mProjectionDistance(Min.–Max.):0.62–10.41m
NP39ML PowerfocusThrowratio0.38:1,F2.0,f=5.64mmImagesize(Diagonal):100–350inches/2.54–8.89mProjectionDistance(Min.–Max.):0.82–2.7m
183
9. Appendix
Power CordIfthesuppliedpowercordcannotbeusedorinyourareathevoltageconditionisdifferentfromthesuppliedpowercord,usepowercordsthataresuitablefortheelectricalspecifications,typesofpowercordsandregulationsofthecountryofinstallation,asshowninthefollowingtableasshownbelow.Formoreinformation,contactyourdealer.Power Cord Electrical Specifications
Powersupply PowercordelectricalspecsAC100-130V 125V15Aorhigher
250V16AorhigherAC200-240V 250V16Aorhigher
Type of power cord
plug
connector
cord
Plug and cordYourplugmustcomplywithyourcountry’ssafetyrequirementsandyouroutlettype.ConnectorDimensionsoftheconnectorofthepowercordareshownbelow
7+0.5−0
13±0.2
20min2.5+0.5−08±0.2
2.5+0.5−0 R3.5min
6.0+0.5−0
28+0−0.9 20+0−0.7
Unit:mm
184
9. Appendix
❺ Cabinet Dimensions
Unit:mm(inch)
500 (19.7)
300 (11.8)
150 (5.9)
583
(23)
577
(22.
7)
112.
5 (4
.4)
216
(8.5
)
211
(8.3
)12
4.5
(4.9
)15
0 (5
.9)
150
(5.9
)
Lenscenter
6-M4×L16(Max)forCeilingMount*
* The screws specifications forCeilingMount:
Screwtype:M4 Screw hole dimension on theprojector:M4withthemaximumdepth16mm(0.63")
CAUTION:Donotattempttomounttheprojectoronaceilingyourself.Theprojectormustbeinstalledbyqualifiedtechniciansinordertoensureproperoperationandreducetheriskofbodilyinjury.Inaddition,theceilingmustbestrongenoughtosupporttheprojectorandtheinstallationmustbeinaccordancewithanylocalbuildingcodes.Pleaseconsultyourdealerformoreinformation.
185
9. Appendix
❻ Pin assignments and signal names of main terminalsCOMPUTER IN/ Component Input Terminal (Mini D-Sub 15 Pin)
Connection and signal level of each pin
51 42 310
11 12 13 14 156 97 8
Signal LevelVideosignal:0.7Vp-p(Analog)Syncsignal:TTLlevel
Pin No. RGBSignal(Analog) YCbCrSignal1 Red Cr2 GreenorSynconGreen Y3 Blue Cb4 Ground5 Ground6 RedGround CrGround7 GreenGround YGround8 BlueGround CbGround9 NoConnection10 SyncSignalGround11 NoConnection12 Bi-directionalDATA(SDA)13 HorizontalSyncorCompositeSync14 VerticalSync15 DataClock
HDMI IN Terminal (Type A)
1 3 5 7 9 11 13 15 17 192 4 6 8 10 12 14 16 18
Pin No. Signal Pin No. Signal1 TMDSData2+ 11 TMDSClockShield2 TMDSData2Shield 12 TMDSClock−3 TMDSData2− 13 CEC4 TMDSData1+ 14 Disconnection5 TMDSData1Shield 15 SCL6 TMDSData1− 16 SDA7 TMDSData0+ 17 DDC/CECgrounding8 TMDSData0Shield 18 +5Vpowersupply9 TMDSData0− 19 Hotplugdetection10 TMDSClock+
DisplayPort IN Terminal
1 3 5 7 9 11 13 15 17 192 4 6 8 10 12 14 16 18 20
Pin No. Signal Pin No. Signal1 Mainlinklane3− 11 Grounding02 Grounding3 12 Mainlinklane0+3 Mainlinklane3+ 13 Configuration14 Mainlinklane2− 14 Configuration25 Grounding2 15 Supplementarychannel+6 Mainlinklane2+ 16 Grounding47 Mainlinklane1− 17 Supplementarychannel−8 Grounding1 18 Hotplugdetection9 Mainlinklane1+ 19 Return
10 Mainlinklane0− 20 +3.3Vpowersupply
186
9. Appendix
Ethernet/HDBaseT Port (RJ-45)
1 2 3 4 5 6 7 8
Pin No. Signal1 TxD+/HDBT0+2 TxD−/HDBT0−3 RxD+/HDBT1+4 Disconnection/HDBT2+5 Disconnection/HDBT2−6 RxD−/HDBT1−7 Disconnection/HDBT3+8 Disconnection/HDBT3−
USB Port (Type A)
1
3
2
4
Pin No. Signal1 VBUS2 D−3 D+4 Grounding
PC CONTROL Port (D-Sub 9 Pin)
12345
6789
Communications protocol
Pin No. Signal1 Unused2 RxD receptiondata3 TxD transmissiondata4 Unused5 Grounding6 Unused7 RTS transmissionrequest8 CTS transmissionallowed9 Unused
187
9. Appendix
❼ TroubleshootingThissectionhelpsyouresolveproblemsyoumayencounterwhilesettinguporusingtheprojector.
Indicator Messages
POWER Indicator
Indicatordisplay Projectorstatus Procedure
Off Powerisoff. –
Flashing Blue(shortflashes) Preparingtoturnpoweron Waitawhile.
Blue(longflashes) Offtimer(enabled)Programtimer(offtimeenabled)
–
Orange(shortflashes) Projectorcooling Waitawhile.
Orange(longflashes) Programtimer(ontimeenabled) –
Lit Blue Poweron –
Red Standbymode(NORMAL) –
Orange Standbymode(NETWORKSTANDBY) –
STATUS Indicator
Indicatordisplay Projectorstatus Procedure
Off Noproblem,orSTAND-BYMODE-“NETWORKSTANDBY”
–
Flashing Red(oncepercycle)
Lensisnotfixedon. Checkfixingconditionsofthelens.
Red(fourtimespercycle)
Fanproblem The cooling fan has stopped turning.Contact anNECprojectorcustomersupportcenterforrepairs.
Orange Networkconflict It is not possible to connect theprojector’s built-in LANandwireless LANsimultaneously to the samenetwork.Toconnecttheprojector’sbuilt-inLANandwirelessLANsimultaneously,connectthemtodifferentnetworks.
Lit Green STANDBYMODEinsleepmode*
–
Orange Buttonhasbeenpressedwhileprojectorisinkeylockmode
Theprojector’skeysarelocked.Thesettingmustbecan-celedtooperatetheprojector.(→Page124)
Projector’sIDnumberandremotecontrol’sIDnumberdonotmatch
CheckthecontrolIDs.(→Pages125)
* Sleepmodereferstothestatewherebythefunctionalrestrictionsduetothestandbymodesettingareremoved.
188
9. Appendix
LIGHT Indicator
Indicatordisplay Projectorstatus Procedure
Off Thelightmoduleisturnedoff.
–
Flashing Red(sixtimespercycle)
Thelightsourceisnotturnedon.
Waitforover1minuteandtrytopowerONtheprojectoragain.Iftheproblemstillpersists,contacttheNECprojectorcustomersupportcenter.
Lit Green Lightmodulelit –
TEMP.Indicator
Indicatordisplay Projectorstatus Procedure
Off Noproblem
Flashing Red(cyclesof2)
Temperatureproblem Thetemperatureprotectorhasbeenactivated.Iftheroomtemperatureishigh,movetheprojectortoacoolplace.Iftheproblemstillpersists,contacttheNECprojectorcus-tomersupportcenter.
Lit Orange Highsurroundingtem-perature(ForcedECOMode)
The surrounding temperature is high. Lower the roomtemperature.
If the temperature protector is activatedIftheprojector’sinternaltemperaturerisesabnormally,thelightmoduleturnsoffandthetemperatureindicatorflashes(repeatedlytwoflashespercycle).Itmayhappenthattheprojector’stemperatureprotectorissimultaneouslyactivatedandtheprojector’spowerturnsoff.Ifthishappens,dothefollowing:- Unplugthepowercordfromthepoweroutlet.
- Ifusinginaplacewherethesurroundingtemperatureishigh,movetheprojectortoadifferent,coolplace.
- Ifthereisdustintheventilationslits,clean.(→page159)
- Waitassuchabout1hourfortheprojector’sinternaltemperaturetolower.
189
9. Appendix
Common Problems & Solutions(→“POWER/STATUS/LIGHT/TEMP.Indicator”onpage186,187.)
Problem CheckTheseItems
Does not turn onor shut down
• Checkthatthepowercordispluggedinandthatthepowerbuttonontheprojectorcabinetortheremotecontrol is on� (→ pages 14, 15)
• Checktoseeiftheprojectorhasoverheated.Ifthereisinsufficientventilationaroundtheprojectororiftheroom where you are presenting is particularly warm, move the projector to a cooler location�
• Thelightmodulemayfailtolight.Waitafullminuteandthenturnonthepoweragain.• Incaseit’shardtothinkthetroubleisnotcausedontheabovementionedconditions,unplugthepower
cord from the outlet� Then wait 5 minutes before plugging it in again� (→ page 34)
Will turn off • Ensurethatthe[OFFTIMER],[AUTOPOWEROFF]or[PROGRAMTIMER]isoff.(→ page 120, 135)
No picture • Checkiftheappropriateinputisselected.(→ page 20) If there is still no picture, press the SOURCE button or one of the source buttons again�
• Ensureyourcablesareconnectedproperly.• Usemenustoadjustthebrightnessandcontrast.(→ page 93)• CheckthattheSHUTTER(lensshutter)orAVMUTE(imageoff)buttonsarenotpressed.• Checkthe[POWERONSHUTTER]intheonscreenmenuisnotsetto[CLOSE].• Resetthesettingsoradjustmentstofactorypresetlevelsusingthe[RESET]intheMenu.(→ page 136)• EnteryourregisteredkeywordiftheSecurityfunctionisenabled.(→ page 45)• IftheHDMIINortheDisplayPortINsignalcannotbedisplayed,trythefollowing.
- Reinstall your driver for the graphics card built in your computer, or use the updated driver� For reinstalling or updating your driver, refer to the user guide accompanied with your computer or
graphics card, or contact the support center for your computer manufacturer� Install the updated driver or OS on your own responsibility� We are not liable for any trouble and failure caused by this installation�
• SignalsmaynotbesupporteddependingontheHDBaseTtransmissiondevice.IRandRS232Ccannotbeused in certain cases as well�
• BesuretoconnecttheprojectorandnotebookPCwhiletheprojectorisinstandbymodeandbeforeturningon the power to the notebook PC�
In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up�* If the screen goes blank while using your remote control, it may be the result of the computer’s screen-
saver or power management software�• Seealsothepage190�
Picture suddenly becomes dark
• CheckiftheprojectorisintheForcedECOmodebecauseoftoohighambienttemperature.
Color tone or hue is unusual
• Checkifanappropriatecolorisselectedin[WALLCOLOR].Ifso,selectanappropriateoption.(→ page 115)
• Adjust[HUE]in[PICTURE].(→ page 93)
Image isn’t square to the screen
• Repositiontheprojectortoimproveitsangletothescreen.(→ page 22)• UsetheKeystonecorrectionfunctiontocorrectthetrapezoiddistortion.(→ page 42)
Picture is blurred • Adjustthefocus.(→ page 26)• Repositiontheprojectortoimproveitsangletothescreen.(→ page 22)• Ensure that thedistancebetween theprojectorandscreen iswithin theadjustment rangeof the lens.
(→ page 171)• Hasthelensbeenshiftedbyanamountexceedingtheguaranteedrange?(→ page 174)• Condensationmayformonthelensiftheprojectoriscold,broughtintoawarmplaceandisthenturned
on� Should this happen, let the projector stand until there is no condensation on the lens�
Image is scrolling vertically, horizontally or both
• Checkthecomputer’sresolutionandfrequency.Makesurethattheresolutionyouaretryingtodisplayissupported by the projector� (→ page 177)
• AdjustthecomputerimagemanuallywiththeHorizontal/Verticalinthe[IMAGEOPTIONS].(→ page 94)
Remote control does not work
• Installnewbatteries.(→ page 11)• Makesuretherearenoobstaclesbetweenyouandtheprojector.• Standwithin22feet(7m)oftheprojector.(→ page 12)
Indicator is lit or blinking
• SeethePOWER/STATUS/LIGHT/TEMP.Indicator.(→ page 186, 187)
190
9. Appendix
Problem CheckTheseItems
Cross color in RGB mode
• PresstheAUTOADJ.buttonontheprojectorcabinetortheremotecontrol.(→ page 33)• Adjustthecomputerimagemanuallywith[CLOCK]/[PHASE]in[IMAGEOPTIONS]inthemenu.(→ page
94)
Formoreinformationcontactyourdealer.
191
9. Appendix
If there is no picture, or the picture is not displayed correctly.
• PoweronprocessfortheprojectorandthePC.
BesuretoconnecttheprojectorandnotebookPCwhiletheprojectorisinstandbymodeandbeforeturningonthepowertothenotebookPC.
InmostcasestheoutputsignalfromthenotebookPCisnotturnedonunlessconnectedtotheprojectorbeforebeingpoweredup.
NOTE:Youcancheckthehorizontalfrequencyofthecurrentsignalintheprojector’smenuunderInformation.Ifitreads“0kHz”,thismeansthereisnosignalbeingoutputfromthecomputer.(→ page 137orgotonextstep)
• Enablingthecomputer’sexternaldisplay.
DisplayinganimageonthenotebookPC’sscreendoesnotnecessarilymeanitoutputsasignaltotheprojector.WhenusingaPCcompatiblelaptop,acombinationoffunctionkeyswillenable/disabletheexternaldisplay.Usu-ally,thecombinationofthe“Fn”keyalongwithoneofthe12functionkeysgetstheexternaldisplaytocomeonoroff.Forexample,NEClaptopsuseFn+F3,whileDelllaptopsuseFn+F8keycombinationstotogglethroughexternaldisplayselections.
• Non-standardsignaloutputfromthecomputer
IftheoutputsignalfromanotebookPCisnotanindustrystandard,theprojectedimagemaynotbedisplayedcorrectly.Shouldthishappen,deactivatethenotebookPC’sLCDscreenwhentheprojectordisplayisinuse.EachnotebookPChasadifferentwayofdeactivate/reactivatethelocalLCDscreensasdescribedinthepreviousstep.Refertoyourcomputer’sdocumentationfordetailedinformation.
• ImagedisplayedisincorrectwhenusingaMac
WhenusingaMacwiththeprojector,settheDIPswitchoftheMacadapter(notsuppliedwiththeprojector)ac-cordingtoyourresolution.Aftersetting,restartyourMacforthechangestotakeaffect.
ForsettingdisplaymodesotherthanthosesupportedbyyourMacandtheprojector,changingtheDIPswitchonaMacadaptermaybounceanimageslightlyormaydisplaynothing.Shouldthishappen,settheDIPswitchtothe13"fixedmodeandthenrestartyourMac.Afterthat,restoretheDIPswitchestoadisplayablemodeandthenrestarttheMacagain.
NOTE:AVideoAdaptercablemanufacturedbyAppleComputerisneededforaMacBookwhichdoesnothaveaminiD-Sub15-pinterminal.
• MirroringonaMacBook
* WhenusingtheprojectorwithaMacBook,outputmaynotbesetto1024×768unless“mirroring”isoffonyourMacBook.Refertoowner’smanualsuppliedwithyourMaccomputerformirroring.
• FoldersoriconsarehiddenontheMacscreen
Foldersoriconsmaynotbeseenonthescreen.Shouldthishappen,select[View]→[Arrange]fromtheApplemenuandarrangeicons.
192
9. Appendix
❽ PC Control Codes and Cable ConnectionPC Control Codes
Function Code Data
POWER ON 02H 00H 00H 00H 00H 02H
POWER OFF 02H 01H 00H 00H 00H 03H
INPUT SELECT HDMI 02H 03H 00H 00H 02H 01H A1H A9H
INPUT SELECT DisplayPort 02H 03H 00H 00H 02H 01H A6H AEH
INPUT SELECT BNC 02H 03H 00H 00H 02H 01H 02H 0AH
INPUT SELECT BNC(CV) 02H 03H 00H 00H 02H 01H 06H 0EH
INPUT SELECT BNC(Y/C) 02H 03H 00H 00H 02H 01H 0BH 13H
INPUT SELECT COMPUTER 02H 03H 00H 00H 02H 01H 01H 09H
INPUT SELECT HDBaseT 02H 03H 00H 00H 02H 01H 20H 28H
INPUT SELECT SLOT 02H 03H 00H 00H 02H 01H ABH B3H
PICTURE MUTE ON 02H 10H 00H 00H 00H 12H
PICTURE MUTE OFF 02H 11H 00H 00H 00H 13H
NOTE:ContactyourlocaldealerforafulllistofthePCControlCodesifneeded.
Cable ConnectionCommunicationProtocol
Baud rate �����������������������������������������38400 bpsData length ��������������������������������������8 bitsParity �����������������������������������������������No parityStop bit ��������������������������������������������One bitX on/off ��������������������������������������������NoneCommunications procedure �������������Full duplex
NOTE:Dependingontheequipment,alowerbaudratemayberecommendedforlongcableruns.
PC Control Terminal (D-SUB 9P)
NOTE1:Pins1,4,6and9arenoused.
NOTE2:Jumper“RequesttoSend”and“CleartoSend”togetheronbothendsofthecabletosimplifycableconnection.
NOTE3:Forlongcablerunsitisrecommendedtosetcommunicationspeedwithinprojectormenusto9600bps.
1 52 43
6 7 98
ToGNDofPC
ToRxDofPC
ToTxDofPC
ToRTSofPC
ToCTSofPC
193
9. Appendix
❾ Troubleshooting Check ListBeforecontactingyourdealerorservicepersonnel,checkthefollowinglisttobesurerepairsareneededalsobyreferringtothe“Troubleshooting”sectioninyouruser’smanual.Thischecklistbelowwillhelpussolveyourproblemmoreefficiently.* Printthispageandthenextpageforyourcheck.
Frequency of occurrence □ always □sometimes(Howoften?_____________________) □other(__________________)
Power□ No power (POWER indicator does not light blue)� See also “Status
Indicator (STATUS)”�□ Power cord’s plug is fully inserted into the wall outlet�□ No power even though you press and hold the POWER button�□ The main power switch is in the “ON (I)” position�
□ Shut down during operation�□ Power cord’s plug is fully inserted into the wall outlet�□ [AUTO POWER OFF] is turned off (only models with the [AUTO
POWER OFF] function)�□ [OFF TIMER] is turned off (only models with the [OFF TIMER]
function)�
Video and Audio□ No image is displayed from your PC or video equipment to the
projector�□ Still no image even though you connect the projector to the PC
first, then start the PC�□ Enabling your notebook PC’s signal output to the projector�
• Acombinationoffunctionkeyswillenable/disabletheexter-naldisplay.Usually,thecombinationofthe“Fn”keyalongwithoneofthe12functionkeysturnstheexternaldisplayon or off.
□ No image (blue or black background, no display)�□ Still no image even though you press the AUTO ADJUST button�□ Still no image even though you carry out [RESET] in the
projector’s menu�□ Signal cable’s plug is fully inserted into the input terminal□ A message appears on the screen�
(_____________________________________________)□ The source connected to the projector is active and available�□ Still no image even though you adjust the brightness and/or
the contrast�□ Input source’s resolution and frequency are supported by the
projector�□ Image is too dark�
□ Remains unchanged even though you adjust the brightness and/or the contrast�
□ Image is distorted�□ Image appears to be trapezoidal (unchanged even though you
carry out the [KEYSTONE] adjustment)�
□ Parts of the image are lost�□ Still unchanged even though you press the AUTO ADJUST
button�□ Still unchanged even though you carry out [RESET] in the
projector’s menu�□ Image is shifted in the vertical or horizontal direction�
□ Horizontal and vertical positions are correctly adjusted on a computer signal�
□ Input source’s resolution and frequency are supported by the projector�
□ Some pixels are lost�□ Image is flickering�
□ Still unchanged even though you press the AUTO ADJUST button�
□ Still unchanged even though you carry out [RESET] in the projector’s menu�
□ Image shows flickering or color drift on a computer signal�□ Still unchanged even though you change [FAN MODE] from
[HIGH] to [AUTO]�□ Image appears blurry or out of focus�
□ Still unchanged even though you checked the signal’s resolution on PC and changed it to projector’s native resolution�
□ Still unchanged even though you adjusted the focus�
Other□ Remote control does not work�
□ No obstacles between the sensor of the projector and the remote control�
□ Projector is placed near a fluorescent light that can disturb the infrared remote controls�
□ Batteries are new and are not reversed in installation�
□ Buttons on the projector cabinet do not work (only models with the [CONTROL PANEL LOCK] function)□ [CONTROL PANEL LOCK] is not turned on or is disabled in
the menu�□ Still unchanged even though you press and hold the SOURCE
button for a minimum of 10 seconds�
194
9. Appendix
In the space below please describe your problem in detail.
Information on application and environment where your projector is used
Projector PC
Blu-rayplayer
Projector
Model number:Serial No�:Date of purchase:Light module operating time (hours):Eco Mode: □ OFF □ ONInformation on input signal:
Horizontal synch frequency [ ] kHzVertical synch frequency [ ] HzSynch polarity H □ (+) □ (−) V □ (+) □ (−)Synch type □ Separate □ Composite □ Sync on Green
STATUS Indicator:Steady light □ Orange □ GreenFlashing light [ ] cycles
Remote control model number:
Installation environment
Screen size: inchScreen type: □ White matte □ Beads □ Polarization
□ Wide angle □ High contrastThrow distance: feet/inch/mOrientation: □ Ceiling mount □ DesktopPower outlet connection:□ Connected directly to wall outlet□ Connected to power cord extender or other (the
numberofconnectedequipment______________)□ Connected to a power cord reel or other (the number
ofconnectedequipment______________)
Computer
Manufacturer:
Model number:
Notebook PC □ / Desktop □
Native resolution:
Refresh rate:
Video adapter:
Other:
Videoequipment
VCR, Blu-ray player, Video camera, Video game or other
Manufacturer:
Model number:Signal cable
NECstandardorothermanufacturer’scable?Model number: Length: inch/m
Distribution amplifierModel number:
SwitcherModel number:
AdapterModel number:
©NECDisplaySolutions,Ltd.2015 7N952341