IFTM UNIVERSITY

FORMAT FOR PREPARATION OF PROJECT REPORT

B.Com (Honors)

ARRANGEMENT OF CONTENTS:The sequence in which the project report material should be arranged is as follows:

1. Cover Page

2. Certificate

3. Acknowledgement

4. Abstract

5. Table of Contents

6. Chapters

7. References

8. Appendices( If any)

The tables and figures shall be introduced at the appropriate places.

WRITING INSTRUCTIONS:

1. The project must be submitted in one hand written copy duly signed by the Supervisor. Students should also submit the soft copy on CD .

2. The length of the report may be about 25 to 30 pages.

3. The project report shall be spiral bound. The name of the students, degree, month and

year of submission, name of the university including institute name shall be printed in

black letters on the cover page as per Annexure “A”.

4. The table of contents should list all headings and sub headings. The title page and

certificate will not find a place among the items listed in the Table of Contents. One and

a half spacing should be adopted for typing the matter under this head.

5. Project report consists of following chapters.

a. Chapter 1- Introduction

b. Chapter 2- Objective and scope of the study

c. Chapter3- Brief Profile of the Firm and the Supervisor

d. Chapter 4- Present Work

e. Chapter 5- Result & Discussion

f. Chapter 6- Conclusion & Future Scope

8. Each chapter should be given an appropriate title. Tables & figures in a chapter should be

placed in the immediate vicinity of the reference where they are cited. Footnotes should be used

sparingly.

9. The reference material should be listed in the alphabetical order of the surname of the first

author. The name of the author (s) should be immediately followed by the year and other details.

A typical illustrative list given below relates to the citation example quoted above.

REFERENCES:

1. Anderson, J.D. (1995) Computational Fluid Dynamics. McGraw Hill, Singapore 1995.

2. Barnard, R.W. and Kellogg, C. (1980) ‘Applications of Convolution Operators to

Problems in Univalent Function Theory’, Michigan Mach, J., Vol.27, pp.81–94.

3. Shin, K.G. and Mckay, N.D. (1984) ‘Open Loop Minimum Time Control of Mechanical

Manipulations and its Applications’, Proc.Amer.Contr.Conf., San Diego, CA, pp. 1231-1236.

Annexure ‘A’

A

PROJECT REPORT

ON

“TOPIC”

AT

NAME and LOGO OF THE COMPANY

Submitted in partial fulfillment of the requirement

For the award of degree

Of

BACHLEOR OF COMMERCE (Honours)

SESSION (20**-20**)

SUBMITTED TO: - SUBMITTED BY:-

Faculty Guide: Name:

Designation: Class:

University Roll No:-

University Logo

University Name

Year

Annexure ‘B’

CERTIFICATE OF ORIGINALITY (To be filled in by the student in his / her handwriting)

I ________________________________Roll No.______________________________ a full time bonafide

student of Third year of Bachelor of Commerece (B.com(Honours)) Programme of IFTM University,

Moradabad. I hereby certify that this project work carried out by me at

_________________________________________________________________________and the report

submitted in partial fulfillment of the requirement of the programme is an original work of mine under the

guidance of the industry mentor _________________________ and faculty mentor

______________________________. Further, the present work is not based or reproduced from any existing

work of any other person or on any earlier work undertaken at any other time or for any other purpose, and

has not been submitted anywhere else at any time.

(Student's Signature) (Faculty Mentor's Signature)

Date:__________________ Date:__________________

Annexure ‘C’

ACKNOWLEDGEMENT

It is my pleasure to be indebted to various people, who directly or indirectly contributed in

the development of this work and who influenced my thinking, behavior, and acts during the course of

study.

I express my sincere gratitude to …………………………….., for providing me an opportunity to

undergo winter training at ……………………..

I am thankful to Mr/ Ms.………………. for his support, cooperation, and motivation provided to

me during the training for constant inspiration, presence and blessings.

I also extend my sincere appreciation to Mr/Ms. …………………………who provided his valuable

suggestions and precious time in accomplishing my project report.

Lastly, I would like to thank the Almighty and my parents for their moral support and my

friends with whom I shared my day-to-day experience and received lots of suggestions that improved my

quality of work.

(Name and Signature of the student)

TABLE OF CONTENTS Page No.

Acknowledgement i

Abstract ii

Chapter 1: INTRODUCTION/ OR ABOUT THE TOPIC

Chapter 2: OBJECTIVE AND SCOPE OF THE STUDY

Chapter 3: BRIEF PROFILE OF THE FIRM AND THE SUPERVISOR

Chapter 4: PRESENT WORK

Chapter 5: RESULTS AND DISCUSSION

Chapter 6: CONCLUSION AND FUTURE SCOPE

References

Appendices