Project Name: DIR-655 - dlinktw.com.t€¦ · 1.Support 3G dongle DWM-156A2. 2.Syslog didn't...

Project Name: DIR-655

HW version: B1

Region code: EU

WLAN Domain: 0x30/ETSI

Channel List 2.4G: 1, 2, 3, 4, 5, 6, 7, 8 ,9, 10, 11, 12, 13

Firmware Query URL:

http://wrpd.dlink.com.tw/router/firmware/query.asp?model=DIR-655_Bx_Default

Flash size: 8MB

DRAM size: 64MB

Algorithm: New Algorithm

Reference Mac: Wan Mac.

=======================================================================

=

Release notes history.

Firmware Version: v2.05 Build: 05 Beta

Firmware Date: 16, Jan 2012

Hardware: B1

KERNEL version: 2.6.28,SDK: 1.0, Build: 0050, Date: Tue, 10, Mar, 2011

CheckSum: 0x33873485

Problem Resolved: 1. Client SharePort can’t detect USB device.

Firmware Version: v2.05 Build: 05


Hardware: B1


CheckSum: 0x33813CB0

Problem Resolved: Add Disable WPS-PIN Method

(This version base on v2.05 Build: 04)

Firmware Version: v2.05 Build: 04 Beta

Firmware Date: 14, Dec 2011

Hardware: B1


CheckSum: 0x3388D790

IPv6 Version: 1.18

Problem Resolved: 1. D-Track-HQ20111206000018 : DDNS doesn’t update the correct WAN ip


Firmware Date: 28, Nov 2011

Hardware: B1


CheckSum: 0x337D91D3

Problem Resolved: 2. Fix schedule bugs in access control web UI



Hardware: B1


CheckSum: 0x3383926B

Problem Resolved: 1. Enable Access control rule cause internet connection fail issue.

Step 1. Factory default DUT

Step 2.WAN type as PPPoe

Step 3.Configure “yahoo” in website filter for “ALLOW”

Step 4.Configure Access control as below

a. Choose “IP” for one LAN PC

b. Choose “Block Some Access” and enable “Website Filter”

c. Enable Web Access logging

Step 5.Try to access internet website, all PC in LAN can’t access to internet.



Hardware: B1


CheckSum: 0x33754E86

Problem Resolved:

1. Support Coexistent disable. (Fix status page Channel Width display wrong)



Hardware: B1


CheckSum: 0x337B8842

Problem Resolved: 1. Support Coexistent disable.



Hardware: B1


CheckSum: 0x337ECF3A

Problem Resolved: 1. Support Coexistent disable.


Firmware Date: 05, Oct 2011

Hardware: B1



Problem Resolved: 1. Fixed:D-Link IPCAM DCS-2121 can't open port 80 through UPnP


Firmware Date: 27, Sep 2011

Hardware: B1


CheckSum: 0x3367B75B

Problem Resolved: 1. Update to v2.02b10 for official release.

Firmware Version: v2.02 Build: 09Beta02


Hardware: B1


CheckSum: 0x3358DE75

Problem Resolved: 2. Fixed status page and internet connection LED of PPPoE 3. Fixed webUI setting schedule in Access Control page 4. Fixed weburl log when selected other machine in Access Control



Hardware: B1



Problem Resolved: 1. Optimize URL filter 2. Change sessions to 16000


Firmware Date: 11, Aug 2011

Hardware: B1


CheckSum: 0x351549F1

Problem Resolved: 1. Update to v2.02b09 for official release.


Firmware Date: 10,Aug 2011

Hardware: B1


CheckSum: 0x3517F14F

Problem Resolved: 1. Fixed: base on last version item 1, the “port filter” can’t be work when WAN type is pppoe.


Firmware Date: 09,Aug 2011

Hardware: B1


CheckSum: 0x33DC7017

Problem Resolved: 1. Fixed web browser can’t access to internet, when setup some steps in Access Control

page, the setup steps as below a. Choose “Other Machine b. Choose “Block Some Access” and enable “Apply Advanced Port Filters” c. setup port filter rules to block all ports except TCP 80, 443 and UDP 53

2. Fixed “allow pc”(as policy 2) can’t access to internet ,on Access control function, setup some Restricted Website as below and setup policy 1. Block all PC to access

those restricted website and policy 2. that Allow an IP 192.168.0.101 to access to All

Websites without any restriction

www.facebook.com

www.friendster.com

www.jobstreet.com.sg


Firmware Date: 12,Jul 2011

Hardware: B1


CheckSum: 0x3494C427

Problem Resolved: 1.Added the ipv6-firewall page to support multi-language



Hardware: B1



Problem Resolved:

3. Fix WAN type set static IP will cause NTP function fail.



Hardware: B1


CheckSum: 0x335F2B86

Problem Resolved:

4. Fix WAN type set static IP will cause NTP function fail.

Steps 1. Reset to Default, setup with Static IP wan mode and then save.

Steps 2. Change timezone, enable NTP Server option.

Steps 3. Check the time, It’s correct.

Steps 4. to System page, click reboot button

Steps 5. wait to complete, and then go to Time page

Result : Time do not update.


Firmware Date: 30,Jun 2011

Hardware: B1


CheckSum: 0x336A273E

Problem Resolved:

1. Fix virtual server issue : set a virtual rule and SAVE change, and then disable previous

virtual server rule, leave blank for “Name” and “IP Address” and “Uncheck”, SAVE

change, After finish LAN PC can’t access to internet.



Hardware: B1



Problem Resolved:

1. Fix oray status can’t refresh automatically.

2. Fix RTSP can’t work with Ericsson MOD-2 Trial test.

Firmware Version: v2.02 Build: 08Beta


Hardware: B1


CheckSum: 0x3341EB8B

Problem Resolved:

1. Fix Atheros Driver addba action frame issue with SONY TV.

2. Fix RTSP issue with Darwin streaming server.

3. update IPv6 code to the newest.

4. Fix Teredo server issue.

5. Fix IGMP frames to wlan.



Hardware: B1


CheckSum: 0x34B40B8E

Problem Resolved: 1. Add ALG item


Firmware Date: 8,June 2011

Hardware: B1



Problem Resolved: 1. Fix Atheros Driver addba action frame issue with SONY TV.


Firmware Date: 12,May 2011

Hardware: B1


CheckSum: 0x33469F5A

Problem Resolved: 1. Fix Vitual Server with schedule Fail when schedule name have blank.


Firmware Date: 06,May 2011

Hardware: B1

KERNEL version: 2.6.28,SDK: 1.0, Build: 0049, Date: Fri, 25, Feb, 2011

CheckSum: 0x333FE62B

Problem Resolved: 1. TOOLS DDNS add IPv6 DDNS

2. Fix MTU issue

3. Different Configuration don’t need restore to default.


Firmware Date: 20, Apr 2011

Hardware: B1


CheckSum: 0x334E573A

Problem Resolved:

1. SharePort and printing problem with a Canon MP360



Hardware: B1



Problem Resolved:

1. Routing rules and WAN status issue : if set more routing rules than 25, the

WAN status display incorrect. And it cause DUT cant browser internet. Firmware Version: v2.02 Build: 04Beta


Hardware: B1


CheckSum: 0x330A92B2

Problem Resolved:

1. 3G adapter DWM-156 A3 couldn't connect issue.

Test Steps (1). Restore DUT to default (2). Configured internet as 3G

(3). Plug-in DWM-156 A3 (4). Make sure lan client could connect to internet

(5). TOOLS-> SYSTEM -> Reboot the Device (6). DUT couldn't connect internet



Hardware: B1


CheckSum: 0x330BFE97

Problem Resolved:

1. 3G adapter DWM-156 A3 couldn't connect issue. Test Steps

(7). Restore DUT to default (8). Configured internet as 3G (9). Plug-in DWM-156 A3

(10). Make sure lan client could connect to internet (11). Try to power off then power on DUT

(12). DUT couldn't connect internet Firmware Version: v2.02 Build: 02


Hardware: B1


CheckSum: 0x331C270B

Problem Resolved: 1. Fix nvram configuration version control when upgrade new firmware

2. Fix can not eliminate none zero bits that behind prefix_len in 6rd prefix Firmware Version: v2.02 Build: 01

Firmware Date: 29, Mar 2011

Hardware: B1


CheckSum: 0x3311891A

Problem Resolved: 1. Support IPv6 Spec 1.16R(Not support IPv6 Multicast stream)

2.Add status IPv6 routing table

3.Support DNSSL (RFC6106)



Hardware: B1


CheckSum: 0x3202E6A1

Problem Resolved:

1. Remove ipv6 auto detect item.

2. Add log for sending mail.



Hardware: B1


CheckSum: 0x31FC0B3E

Problem Resolved:

1.fix https bug.

2.fix Oray DDNS problem.



Hardware: B1



Problem Resolved:

1.Support 3G dongle DWM-156A2.

2.Syslog didn't display update log for oray ddns.

3.Access control and log issue :

Fix When select the filtering method as "Block All Access", the rule "Logged"

display "Yes" in Policy Table.

4."Don't Save Setting" button didn't work in "SETUP->USB SETTING" issue

Test Steps as below,

(1). Configured "My USB type" as "SharePort" then click "Save Settings" button.

(2). After the configuration be saved then try to select another type, such as "WCN

Configuration"

(3). Click "Don't Save Settings" button, it didn't pop-up any message.

(4). Click another function, such as "WIRELESS SETTINGS", it also didn't pop-up

any message.

5."Don't Save Setting" behavior issue in SETUP -> INTERNET

Test Steps as below,

(1). Restore to Default.

(2). Change WAN type to others from DHCP mode.

(3). Input any settings INFO.

(4). Click "Don't Save Settings" button.

The settings page SHOULD change back to old settings page. (DHCP mode)

Notes,

Configured WAN type to another types then changed to different WAN type also has

this issue.

6.Remove PPPoe pass through

7.Enhance the throughput of PPPoE pass through.



Hardware: B1

KERNEL version: 2.6.28,SDK: 1.0, Build: 0048, Date: Thu, 27, Jan, 2011

CheckSum: 0x31E872F6

Problem Resolved:

1.Support Oray DDNS.


Firmware Date: 23, Dec 2010

Hardware: B1

KERNEL version: 2.6.28,SDK: 1.0, Build: 0046, Date: Thu, 23, Dec, 2010

CheckSum: 0x3358D8E0

Problem Resolved:

1.Support 3G dongle DWM-156A2.



Hardware: B1

KERNEL version: 2.6.28,SDK: 1.0, Build: 0043, Date: Thu, 11, Nov, 2010

CheckSum: 0x3341111A

Problem Resolved:

1.Fixed: The login timeout failed. (It can access web page when key in webpage

name (ex. lan.asp))

2.Fixed: There is change IP address notification when save MAC filter and

Schedule.

3.Fixed: Date format display issue on Information firmware.



Hardware: B1

KERNEL version: 2.6.28,SDK: 1.0, Build: 0042, Date: Tue, 09, Nov, 2010

CheckSum: 0x3336A8B9

Problem Resolved:

1.Fixed TCP connection be disconnected when Enable SPI

2.Follow SPE ChklstForMP_v114, change language pack version in chklst.txt

3.Fixed TSD#7: IP 0.0.0.0 is displayed in Status-> LAN Computer.

4.Fixed TSD#8: Website filter 'allow' URL/Domain can not given empty.

5.Fixed TSD#14:Description issue for Setup -> Internet -> L2TP at Support menu.

6.Fixed TSD#17: Schedule be disabled issue at E-mail Settings.

7.Fixed TSD#19: WAN LED bright incorrect issue.

8.Fixed TSD#20: Tcp port scan fail in port 0 and 1 by using

www.grc.com/default.htm test tool.

9.Fixed TSD#23: When WAN type is PPPoE and then Enable/Disable QoS function,

the count-down value is only 15 seconds. The GUI CAN'T change direction correct.

10.Fixed TSD#24: When modified Schedule rule, the behavior incorrect

11.Fixed TSD#25: Guset Zone security issue.

12.Fixed TSD#26: Website filter rules: Only the first tenth entries on both columns

work.

13.Fixed TSD#29: Network filter issue with Wireless client setting as static IP

14.Support Configuration Version Control.



Hardware: B1

KERNEL version: 2.6.28,SDK: 1.0, Build: 0038, Date: Tue, 21, Sep, 2010

CheckSum: 0x339AAA15

Problem Resolved:

15.Fixed TCP connection be disconnected when Enable SPI

16.Follow SPE ChklstForMP_v114, change language pack version in chklst.txt

old:Language-Version: verWW.XXbZZ

new: Language-Version: verWW.XXYYbZZ

YY: language

17.Fixed TSD#7: IP 0.0.0.0 is displayed in Status-> LAN Computer.

18.Fixed TSD#8: Website filter 'allow' URL/Domain can not given empty.

19.Fixed TSD#15:



Hardware: B1

KERNEL version: 2.6.28,SDK: 1.0, Build: 0037, Date: Wed, 15, Sep, 2010

CheckSum: 0x33A01FF4 Problem Resolved:

1.Modify "Checksum" to "checksum" in chklst.txt 2.Fixed bug: URL with capitalization cannot be blocked.



Hardware: B1

KERNEL version: 2.6.28,SDK: 1.0, Build: 0036, Date: Fri, 10, Sep, 2010

CheckSum: 0x33BE27D7 Problem Resolved:

1. Fixed can not support special character password and security for HNAP.


Firmware Date: 31, Aug 2010

Hardware: B1

KERNEL version: 2.6.28,SDK: 1.0, Build: 0035, Date: Tue, 31, Aug, 2010

CheckSum: 0x3393106F Problem Resolved:

1.Follow the SPEC for D-link HNAP support the special character.

2.Fixed routing page can't save setting without typing any rule name.

3.Update Kcodes lib to support USB and Fixed the USB Led can’t blink.

Firmware: v2.00 Build: 08Beta03

Hardware: B1

Date: 24, Aug 2010

KERNEL: 2.6.28

SDK: 1.0, Build: 0034, Date: Fri, 13, Aug, 2010

CheckSum: 0x34F31C2C

1. Fixed bug: IPv6 PPPoE can not save IPv6 address range.(Stateful DHCPv6)


Hardware: B1

Date: 19, Aug 2010

KERNEL: 2.6.28

SDK: 1.0, Build: 0034, Date: Thu, 13, Aug, 2010

CheckSum: 0x34F3651A

1.Fixed bug: IPv6 Static mode : no send RA packet .

2.Fixed bug:IPv6 PPPoE (Share with IPv4) no show wan / gateway ipv6 address after

connected and dns address

3.Fixed bug:IPv6 PPPoE (create a new one ), Manual mode , use the following DNS

address don’t work

4.Fixed bug:Fixed bug:IPv6 PPPoE (Share with IPv4),no way to connect after disconnect

5.Fixed bug:6rd fail


Hardware: B1

Date: 18, Aug 2010

KERNEL: 2.6.28


CheckSum: 0x34F29510

6.Fixed bug:static / autoconfiguarion mode , IPv6 DNS SETTINGS can't change to "use the

following DNS address"

7.Fixed bug:6rd IPv6 Prefix field can only enter the 9-bit uplink

8.Fixed bug:IPv6 PPPoE (create a new one ) don't work

9.Fixed bug:IPv6 PPPoE (Share with IPv4),no way to connect after disconnect

10.Fixed bug:IPv6 PPPoE (create a new one ) button erro

Firmware: v2.00 Build: 08Beta

Hardware: B1

Date: 13, Aug 2010

KERNEL: 2.6.28


CheckSum: 0x34E47126

11.Support IPv6 Spec 1.12R

Firmware: v2.00 Build: 07

Hardware: B1

Date: 12, Aug 2010

KERNEL: 2.6.28


CheckSum: 0x3373A109

1.Fix bug:QRS v5.04b06 dns ip can’t be shown in wan status.

2.Fix bug:DCC 4.0 auto-channel check mark be removed after set wireless security via DCC, but

wireless channel still use auto-channel function.


Hardware: B1

Date: 12, Aug 2010

KERNEL: 2.6.28



1.Fix QRS v5.04b06 and DCC v4.0 failed when set wan setting.


Hardware: B1

Date: 04, Aug 2010

KERNEL: 2.6.28

SDK: 1.0, Build: 0031, Date: Wed, 04, Aug, 2010

CheckSum: 0x3373A109

1.Fix QoS will let wan on demand not work.

2.Fix guest zone ssid has special character, "STATUS/DEVICE INFO" display error.

3.Fix ddns failed when DDNS Server Address is upper case string.

4.Fix Port Forwarding TCP and UDP port not single one, the configuration couldn't be

saved.

5.Fixed Language-Version info in chklst.txt issue.

6.Fix bug: Default port number issue for IPv6 firewall(TSD),The default port range for

IPv6 firewall should start from "1"

7.Test DCC 4.0 Firmware: v2.00 Build: 04 Hardware: B1 Date: 29, Jul 2010 KERNEL: 2.6.28 SDK: 1.0, Build: 0030, Date: Thu, 29, Jul, 2010


1.Fixed bug: WISH can’t work.

2.Fixed bug: USB Setting and WISH can’t show help file.

3.Fix sometimes display wrong name for LAN Computers at "STATUS/DEVICE INFO"

4.Fixed BT issue. Start BT and run 7 hours , DUT WAN will disconnected then connected

again.

5.Add European 3G ISP list.

6.Follow Specification of D-Link AP and Router Reset and Recovery Mode v1.0

Restore to factory default after reset button is pressed 5 seconds.

7.add USB 3G support DWM-152/156A3

8.Fixed WLAN PC's(static IP) hostname can not displayed for LAN Computers at

"STATUS/DEVICE INFO".

9.Fixed version.txt needs login and chklst.txt does not need to login.

10.Fixed GuestZone SSID not display on Device Info when SSID include special

character(\).

11.Fix wrong strings "Low/option>" for "Transmit Power" at "Advanced Wireless

Settings".

12.Fix bug: Wireless setting can not saved after save the configuration file.

13.Fix bug: Wireless wizard security 64 describes display error.

14.Fix bug: WCN configuration saves failed.

15.Fix bug: USB settings cannot save when 3G change to network/WCN.

16.Fix bug: Default port number issue for IPv6 firewall(TSD),The default port range for

IPv6 firewall should start from "1"

17.Fix bug: IPv6 firewall all not work when schedule applied at any of rule.

18.Fix bug: DDNS not check public IP(DLinkDDNS.com/No-Ip.com)

19.Fix bug: QRS can save advanced DNS.

20.Add Language Pack info in chklst.txt.

Firmware: v2.00 Build: 03 Hardware: B1 Date: 09, Jul 2010 Firmware Version: ver2.00b03 Firmware Date:Fri, 09,Jul, 2010 KERNEL: 2.6.28 SDK: 1.0, Build: 0029, Date: Fri, 9, Jul, 2010 CheckSum: 0x33789CE9 1.Support IPv6 spec 1.10 2.Fix the blank characters in port settings at port forwarding function,it will casue router NAT failed. 3.Fix warning message display incorrect for settings Device Name in lan.asp 4.Fix the blank characters in port settings at port forwarding function,it will casue router NAT failed. 5.IP address for Wake-On-LAN function should allow "x.x.x.255" to be saved 6.Remark printk MTD_KERN_NOTICE 7.Fix DCC security hole : users can set and get setting or reboot from DCC protocol. Firmware: v2.00 Build: 02 Hardware: B1 Date: 11, Jun 2010

KERNEL: 2.6.28 SDK: 1.0, Build: 0026, Date: Fri, 11, Jun, 2010

CheckSum: 0x31FCDED4

1.Fix bug - 3G can not work. 2.Fix bug - Guest zone GUI issue on WPA-PSK/EAP mode after saved settings. 3.Fix bug - Guest Zone Routing between Zones enable, Guest clients can access Ethernet (Host) clients but cannot access Wireless (Host) clients. 4.Fix bug - Failed to add the wireless device messenger not follow spec, should be: If users fail to press the button, display the below message and let users to do it again. 5.Fix bug - SMTP Server Port default is empty at Email settings - please reset to default. 6.Fix bug - QoS page not WISH item on Left-Menu. 7.Fix bug - Wireless LED solid green when Internet port plugs in cable. 8.Fix bug - Network Status connect/disconnect should be +"ed" on IPv6/Status. 9.Fix bug - XMLAgent: dhcp_server (no dhcpd_domain_name value) 10.Fix bug - QRS can save advance DNS settings. 11.Fix bug - wireless page will show security key from page source. 12. Fix bug - There is no status note at DDNS support (help file) via SPEC1.05. 13. Fix bug - Port range warning message error at WISH page. 14. Fix bug - User account can control firmware page. 15. Fixed the Wireless LED gpio behavior issue. When connect wireless, let Wireless LED blink. Firmware: v2.00 Build: 01 Hardware: B1 Date: 01, Jun 2010 Firmware Version: ver2.00b01 Firmware Date:Tue, 01,Jun, 2010 KERNEL: 2.6.28 SDK: 1.0, Build: 0024, Date: Tue, 01, Jun, 2010

CheckSum: 0x31E19FB4 1. New released wireless router firmware. 8.Supporting non-zero MAC ID. 9.Supporting DLink 404 10.Supporting 12/24 time format 11.Supporting SharePort/Kcode

12.Supporting http://router.dlink.com

13.Remove advanced DNS service 14.pass HNAP tool

http://router.dlink.com/

Project Name: DIR-655 - dlinktw.com.t€¦ · 1.Support 3G dongle DWM-156A2. 2.Syslog didn't...

Documents

Transcript of Project Name: DIR-655 - dlinktw.com.t€¦ · 1.Support 3G dongle DWM-156A2. 2.Syslog didn't...