Project - Casting(1)
-
Upload
mohamed-ghoneim -
Category
Documents
-
view
21 -
download
4
description
Transcript of Project - Casting(1)
Faculty of Engineering Ain Shams UniversityDesign and Prod. Eng. Dept
2 nd year MechanicalCourse No. MDP 211Manufacturing Technology IIYEAR 2006 / 2007
Casting Project
تضرب * األبعاد 3 جميع
The purpose of the project is to train the student how to make a casting design, and how to correlate between the quality of casting produced and this design.
The students will work as groups each group consists of 4 to 5 students:
Each group should select a pattern from the following, then:I) Make a drawing for the casting, the pattern and core box.
2) Make a complete casting design:
a) Select cast alloy (cast iron, or Al - Si alloy)
b) Determine casting dimensions.
c) Design the gating system: type, parts, shape, location and dimension.
d) Design the feeding system: type, shape, location and dimensions.
e) A unique report from each group should be completed and extra brief report is needed from each
student to indicate his contribution.
Lecturers: Assistants:Prof. Dr. Mohamed A. Taha Eng. Sherif I. NassefDr. Tarek M. Moussa 1/8 Eng. Ahmed M. Kourachy
Eng. Mohamed A. Moussa
Faculty of Engineering Ain Shams UniversityDesign and Prod. Eng. Dept
2 nd year MechanicalCourse No. MDP 211Manufacturing Technology IIYEAR 2006 / 2007
Due Date: Sat. 06/05/2007
9 10
Lecturers: Assistants:Prof. Dr. Mohamed A. Taha Eng. Sherif I. NassefDr. Tarek M. Moussa 2/8 Eng. Ahmed M. Kourachy
Eng. Mohamed A. Moussa
Faculty of Engineering Ain Shams UniversityDesign and Prod. Eng. Dept
2 nd year MechanicalCourse No. MDP 211Manufacturing Technology IIYEAR 2006 / 2007
7
8
Lecturers: Assistants:Prof. Dr. Mohamed A. Taha Eng. Sherif I. NassefDr. Tarek M. Moussa 3/8 Eng. Ahmed M. Kourachy
Eng. Mohamed A. Moussa
Faculty of Engineering Ain Shams UniversityDesign and Prod. Eng. Dept
2 nd year MechanicalCourse No. MDP 211Manufacturing Technology IIYEAR 2006 / 2007
3 4
Lecturers: Assistants:Prof. Dr. Mohamed A. Taha Eng. Sherif I. NassefDr. Tarek M. Moussa 4/8 Eng. Ahmed M. Kourachy
Eng. Mohamed A. Moussa
Faculty of Engineering Ain Shams UniversityDesign and Prod. Eng. Dept
2 nd year MechanicalCourse No. MDP 211Manufacturing Technology IIYEAR 2006 / 2007
5 6
Lecturers: Assistants:Prof. Dr. Mohamed A. Taha Eng. Sherif I. NassefDr. Tarek M. Moussa 5/8 Eng. Ahmed M. Kourachy
Eng. Mohamed A. Moussa
Faculty of Engineering Ain Shams UniversityDesign and Prod. Eng. Dept
2 nd year MechanicalCourse No. MDP 211Manufacturing Technology IIYEAR 2006 / 2007
11 12
Lecturers: Assistants:Prof. Dr. Mohamed A. Taha Eng. Sherif I. NassefDr. Tarek M. Moussa 6/8 Eng. Ahmed M. Kourachy
Eng. Mohamed A. Moussa
Faculty of Engineering Ain Shams UniversityDesign and Prod. Eng. Dept
2 nd year MechanicalCourse No. MDP 211Manufacturing Technology IIYEAR 2006 / 2007
1 2
Lecturers: Assistants:Prof. Dr. Mohamed A. Taha Eng. Sherif I. NassefDr. Tarek M. Moussa 7/8 Eng. Ahmed M. Kourachy
Eng. Mohamed A. Moussa
Faculty of Engineering Ain Shams UniversityDesign and Prod. Eng. Dept
2 nd year MechanicalCourse No. MDP 211Manufacturing Technology IIYEAR 2006 / 2007
Lecturers: Assistants:Prof. Dr. Mohamed A. Taha Eng. Sherif I. NassefDr. Tarek M. Moussa 8/8 Eng. Ahmed M. Kourachy
Eng. Mohamed A. Moussa