Programmable 10 Circular Chart Recorder NIST · processor-based circular chart recorders with over...

319Davis Inotek Instruments www.davis.com

Recorders / Data Acquisition

C

Programmable 10" Circular Chart Recorder

SPECIFICATIONSRecording

Pen Type Disposable fiber tipPen Color Pen 1 - Red

Pen 2 - GreenChart Size 10 inchChart Drive Stepper motorChart Rotation User configurable; 8 hour, 12 hour, 24 hour or 7 dayChart Span Bottom and top of span, -9999 to 9999 unitsInputsInput Types/Range Type RangeThermocouple J 0°C to 70°C 0°F to 1400°F

K 0°C to 1360°C 0°F to 2500°FT -200°C to 400°C -330°F to 750°FR 200°C to 1650°C 400°F to 3000°FS 200°C to 1650°C 400°F to 3000°F

RTD 100 ohm -140°C to 400°C -220°F to 750°FPlatinum.00385 ohms/ohm/°C

Current DC 0 to 20mA, 4 to 20mAInternal 4.7 ohm Shunt Resistor

Voltage DC 0 to 25mV, 0 to 50mV, 10 to 50mV, 0 to 5 V, 1 to 5 VInput PerformancePerformance Under Reference ConditionMeasurement Error Type J, K, T, R, S and RTD: ± 0.25% of span ± 1 degree

mA, mV and VDC: ± 0.25% of scaled span plus 1 leastsignificant digit

Cold Junction ± 0.2°C @ 25°CCompensation ErrorCold Junction 0.04°/°C deviation from 25°CCompensation RejectionLinearization Error TCs: ± 0.25°C typical, ± 0.5°C worst case withexpectations RTDs: ± 0.1°C typical, ± 0.3°C worst caseAmbient Temperature ± 0.01% of span per °C deviation from 25°CErrorPower RequirementsLine Voltage 90-264 VAC, 50/60 HzPower Consumption 18 VA MaximumConstructionEnclosure Injection molded Noryl case and cover with acrylic

windowNEMA Rating NEMA 3 standardMounting Panel or wallOverall Dimensions 14" wide x 14" high x 3.8" deep

(355.6mm x 355.6mm x 96.5mm)Panel Cutout 12.7" wide x 12.7" high (322.58mm x 322.58mm)Panel Depth 2.5" (63.5mm)Panel Protrusion 1.3" (33.0mm)Weight 15 lbs maximumAlarmsNumber Up to two process alarms for each of two inputsType Process high or lowLimit Device Optional high/low limits for each input with latchingoutput

Normally open output latches openRed reset button included to the right of the display

Hysteresis Fully adjustable, 0 to 200 units, single sidedSecurity Alarm setpoint changes can be prohibitedSensor Fault Action Alarms work normally in “Hi” and “Lo” conditionsRelay OutputsRelays SPDT, contacts rated 5 amps resistive at 115 VAC, 2.5

amps resistive at 230 VAC, 1/8 HP at 230 VAC (singlephase), 250 VA at 115/230

Catalog No. Model Description PricePL1487301 51000011 1 Channel Recorder $640.00

NEMA 3 Case with Alarms/RelaysPL1487311 51100011 2 Channel Recorder 872.00

NEMA 3 Case with Alarms/RelaysPL148732 54020011 1 Channel Recorder 806.00

NEMA 3 Case with Alarms & 2 Relay Outputs

PL148733 54422011 2 Channel Recorder 1,198.00NEMA 3 Case with Alarms & 2 Relay Outputs per Channel

NISTDL01 — NIST Traceable Certificate 200.00NISTDL02 — NIST Traceable Certificate with Data 250.00NISTDLQ01 — 2 Year NIST Traceable Certificate 300.00NISTDLQ02 — 2 Year NIST Traceable Certificate with Data 375.00

Charts — Box of 100Range 12 hour 24 hour 7 day0 to 14 pH – PL214417 PL2144160 to 100 PL213824 PL00213825 PL002138260 to 200 PL213819 PL213801 PL2138060 to 400 PL214410 PL213802 PL2138070 to 1000 – PL213820 PL2138210 to 2000 – PL213810 PL21383430 to 230 F PL213831 PL213832 PL213833Price $18.00 $18.00 $18.00

These recorders are designed with the latest innovation in recording technology, enclosuresand functionality. Finding a place to install thisrecorder is easy, with its compact 2.5" panel depthand short 1.3" protrusion from the front of thepanel. It can be panel or surface mounted. Thecutout size is the commonly utilized 12.7" squarecutout.

• 1 or 2 trend pen versions• 4 digit red LED display• High/Low limit capability

available

• Universal Inputs• Up to 2 alarms per pen• Universal power supply• Communications

NIST it

Davis Inotek Instruments www.davis.com

C

Reco

rder

s / D

ata

Acqu

isitio

n

320

10" Programmable Circular Chart Recorder

Options• Derived variable

Standard formulas for: MassFlow, Humidity, F0, ZrO2; user-entered customized calcula-tions:+, -, X, ÷, Av., Hi/LoSelect, Hi/Lo Peak, Log10Power10, 3rd Order Polynomial

• Retransmission1, 2, 3 or 4 isolated, scaled 4-20mA (into up to 600Ω) or 1-5Voutputs

• NEMA 4X enclosure

• Communications1 asynchronous RS-422 serialchannel, software selectablebaud rates: 9600, 4800, 2400,1200, 600, 300

• Alarm relaysUp to 8 individually assignable30 WDC or 37.5 VA AC, resistive.Maximums: 125 volts; 0.3A @125 VAC; 1.0 A @ 30 VDC

• TotalizerUp to four assignable integrators

SPECIFICATIONSNumber of Inputs 1, 2, 3 or 4Configuration Digital display and integral keypadWriting System Blue, red, green & black disposable markers-1500 feet of lineChart Type Circular, 4" calibrated widthChart Speeds 1 to 4096 hours per revolutionTC B, C, E, J, K, L, N, R, S, T, Ni/Ni MoRTD 100Pt, 10Cu, 100Ni, 120NiVoltage 4 mV to 5 Vdc (to 100 VDC with attenuator)Zero -20% to 100% of gain spanCurrent 4-20mA with 250Ω shuntEvent contact closure or logic lowLinearizations TC, RTD, square root, 3/2 & 5/2 power, Log and custom curvePen Response 5 sec. full scaleChannel Update Each channel scanned every 500 msecDisplay Accuracy 0.02% of operating gain spanCJC Rejection 0.04 degrees/degrees from 25°CInput Impedance >20MΩMemory Configuration saved in EEPROM, active values (totalizers,

avg. etc.) saved 100 hours by a “super” capacitor.Alarms Per channel Four (including derived channels)

Types High, low, deviation & rate of changeCase Panel Space (15.0 x 14.2")

Cutout (13.6 x 13.4") Depth (5.8")Average Weight 7 kg (15 lb)

Catalog No. Model Description PriceCH4080 392 Single channel chart recorder $1,165.00CH4081 392-2 Dual channel chart recorder 1,630.00CH4082 392-3 3-Channel Chart Recorder 2,100.00CH4085 392-4 4-Channel Chart Recorder 2,570.00CH4086 — Output alarm relays per channel 133.00CH4087 — Totalizer (integrators)per channel 220.00CH4088 — Transmitter 24VDC power supply 185.00

1-4 channelsCH4089 — Derived variables per channel 225.00

(2 channel max)CH4090 — Retransmission 4-20mA 260.00

output per channelCH4092 — RS422 communication output 321.00CH4093 — 5 pen replacement pack 17.00

(specify blue, red, green, black)CH4094 — Pack of 100 charts 22.00

(0-100 scale, 24 hr chart)CH4095 — NEMA 4X Enclosure 168.00NISTRC12 — NIST Traceable Certificate 200.00NISTRC13 — NIST Traceable Certificate with Data 250.00

• 40 character vacuum fluorescentdigital display provides highaccuracy readout of process values and totalizers

• 1,2,3 or 4 Inputs• Field programmable• Universal inputs accept:

TCs, RTDs, mA, mV and Volts• Continuous Trace

• EEPROM memory ensures total security

• Microprocessor power permitssimple on-site configurationusing only built-in push buttons

• Digital accuracy: 0.2% of operating span

• Multi-color• Configurable Inputs

NIST it ™

The New Model 392 is designed to pro-vide the latest in recorder technology withan all new servo motor drive system. It'sfrom the leading manufacturer of micro-processor-based circular chart recorderswith over 20,000 in operation worldwide.

The Model 392’s design and solid con-struction makes field upgrades and the ad-dition of features and maintenance quick,easy and affordable.

Individually programmable, the recordercan be quickly and easily configured to yourexact application using the integral key-board and display.

Much more than a recorder, the Model392 puts you in control with two available 3-mode PID controllers with features such ascascade or ratio/bias, feed forward and in-ternal setpoint generators available.Dedicated auto/manual and remote/localsetpoint keypads allow the operator toswitch easily between control modes.



C

Partlow ARC 4100 Circular Chart Recorders

Catalog No. Model Description PricePL411000 411000000211 1 Channel Chart Recorder, Standard Cover, 24 Hour Chart Rotation, 115V AC 60Hz $855.00PL411001 411001000211 Channel Chart Recorder, Standard Cover, 24 Hour Chart Rotation, 115V AC 60Hz 1,320.00PL413010 413010000211 1 Channel Chart Recorder, Standard Cover, On-Off Controller Relay, Second On-Off 1,062.00

Alarm Relay, 24 Hour Chart Rotation, 115V AC 60HzPL413013 PL413013010211 2 Channel Chart Recorder, Standard Cover, On-Off Controller Relays, Second On-Off 1,716.00

Alarm Relays, 24 Hour Chart Rotation, 115V AC 60HzNISTDL01 — NIST Traceable Certificate 200.00NISTDL02 — NIST Traceable Certificate with Data 250.00NISTDLQ01 — 2 Year NIST Traceable Certificate 300.00NISTDLQ02 — 2 Year NIST Traceable Certificate with Data 375.00

AccessoriesPL00214714 00214714 Chart Box of 100 10” Charts, 24-Hour, 0 to 10 18.00PL00213825 00213825 Chart Box of 100 10” Charts, 24-Hour, 0 to 100 18.00PL00213826 00213826 Chart Box of 100 10” Charts, 7-Day, 0 to 100 18.00PL213801 00213801 Chart Box of 100 10” Charts, 24-Hour, 0 to 200 18.00PL00213817 00213817 Chart Box of 100 10” Charts, 24-Hour, 0 to 600 18.00PL213810 00213810 Chart Box of 100 10” Charts, 24-Hour, 0 to 2000 18.00PL148701 60500402 Red Pen, 5 Pack 25.00PL60500401 60500401 Green Pen, 5 Pack 25.00PL64402001 64402001 Mounting Brackets 11.50

• Various inputs types available: thermocouple, mV, V, and mA • Sensor break protection • Disposable fiber tipped pens: red, green • Optional Features- RTD input - Limit device or Control capability - Controllers include a digital potentiometer for setpoint - Remote setpoint - Alarm output per pen - On-off, time proportioning, or current proportioning control - Tamperproof platen - Event pen - Door lock - NEMA 3 enclosure

SPECIFICATIONSAccuracy +/- 1% Accuracy Outputs 5A SPDT Relay or SSRD outputs Dimensions 13.19” H x 15.13” W x 3.63” D Power 115 or 230 (optional) VAC powered Warranty 1 Year warranty Agency Approvals UL Listed, CSA Certified

A general purpose, analog, one or two pen,10” circular chart recorder capable of measur-ing and recording process variables from avariety of inputs types. Recorders are avail-able with optional limit device or controllercapability. Available with 12, 24, 48, or 72hour, or 7 day rotation times and over 60ranges. Can be panel or surface mounted.

NIST it


C

Reco

rder

s / D

ata

Acqu

isitio

n

322

Partlow MRC 7000 Circular Chart Recorders

Catalog No. Model Description PricePL148600 710000000021 1 Channel Chart Recorder, Standard Cover, 115V AC $830.00PL148601 711000000021 2 Channel Chart Recorder, Standard Cover, 90-115V AC 1,096.00PL148602 740200000021 1 Channel Chart Recorder, 2- Relays, Standard Cover, 115V AC 1,027.00PL148603 741200000021 2 Channel Chart Recorder, 2- Relays, Standard Cover, 115V AC 1,211.00PL148604 720200000021 1 Channel Recording Controller Chart Recorder, 2- Relays, Standard Cover, 115V AC 1,027.00PL148605 722200000021 2 Channel Recording Controller Chart Recorder, 2- Relays, Standard Cover, 115V AC 1,211.00NISTDL01 — NIST Traceable Certificate 200.00NISTDL02 — NIST Traceable Certificate with Data 250.00AccessoriesPL00214714 00214714 Chart Box of 100 10” Charts, 24-Hour, 0 to 10 18.00PL00213825 00213825 Chart Box of 100 10” Charts, 24-Hour, 0 to 100 18.00PL00213826 00213826 Chart Box of 100 10” Charts, 7-Day, 0 to 100 18.00PL213801 00213801 Chart Box of 100 10” Charts, 24-Hour, 0 to 200 18.00PL00213817 00213817 Chart Box of 100 10” Charts, 24-Hour, 0 to 600 18.00PL213810 00213810 Chart Box of 100 10” Charts, 24-Hour, 0 to 2000 18.00PL148701 60500402 Red Pen, 5 Pack 25.00PL60500401 60500401 Green Pen, 5 Pack 25.00PL64402001 64402001 Mounting Brackets 11.50

• Standard features- 4 Digit display per pen - Universal Isolated sensor input: thermocouple, RTD, mA, mV, or V - Chart speed from 0.1 to 999.9 hours - Disposable fiber tipped pens: red, green • Optional capabilities- 2 Programmable alarms per pen - Up to 8 relay type outputs - Up to four 4-20mA outputs - Process value retransmission - RS-485 Communications - 24V Transmitter power supply - Door lock - Water-tight enclosure • Optional controller capabilities- On-off, time proportioning, or current proportioning control - Single or dual control output - Position proportioning for use with slidewire feedback - Relay, SSRD, or mA outputs - Remote setpoint input • Optional profiler capabilities- Profile one or two pens - 8 Profiles, each with 6 ramps and 6 soaks - Up to 6 event relay outputs - Remote Run/Hold

A general purpose, microcontroller based, oneor two pen, 10” circular chart recorder available infour versions; basic recorder, limit recorder,recording controller, and recording profile con-troller. The controller is capable of controlling anyprocess from simple on/off to dual 4-20mA outputswith full PID on both pens. Can be panel or sur-face mounted.

NIST it

SPECIFICATIONSMeasurement Accuracy +/- 0.25% Recording Accuracy +/- 0.5% Scan Rate 1 Scan per second Relay Outputs 5A SPST or SPDT Relay outputs Dimensions 13.19” H x 15.13” W x 3.63” D Power 115 or 230 (optional) VAC powered Warranty 3 Year warranty Agency Approvals UL Listed

CSA Certified CE Compliance (optional)



C

Partlow MRC 8000 Circular Chart Recorders

Catalog No. Model Description PricePL8100 810000000021 1 Channel Chart Recorder, Glass Window NEMA 3 Case, 115V AC $989.00PL8110 811000000021 2 Channel Chart Recorder, Glass Window NEMA 3 Case, 90-115V AC 1,285.00PL8202 820200000021 1 Channel Chart Recording Controller, 2- Relays, Glass Window 1,294.00

NEMA 3 Case, 115V ACPL8222 822200000021 Channel Chart Recording Controller, 2- Relays, Glass Window NEMA 3 Case, 115V AC 1,778.00NISTDL01 — NIST Traceable Certificate 200.00NISTDL02 — NIST Traceable Certificate with Data 250.00NISTDLQ01 — 2 Year NIST Traceable Certificate 300.00NISTDLQ02 — 2 Year NIST Traceable Certificate with Data 375.00

AccessoriesPL00215301 00215301 Chart Box of 100 12” Charts, 24-Hour, 0 to 100 18.00PL00215323 00215323 Chart Box of 100 12” Charts, 7-Day, 0 to 100 18.00PL00215303 00215303 Chart Box of 100 12” Charts, 24-Hour, 0 to 200 18.00PL00215324 00215324 Chart Box of 100 12” Charts, 24-Hour, 0 to 600 18.00PL00215329 00215329 Chart Box of 100 12” Charts, 24-Hour, 0 to 2000 18.00PL148701 60500402 Red Pen (5 pack) 25.00PL60500401 60500401 Green Pen (5 pack) 25.00PL64429601 64429601 Mounting Brackets 14.60

• Standard features- 4 Digit display per pen - Universal Isolated sensor input: thermocouple, RTD, mA, mV, or V

- Chart speed from 0.1 to 999.9 hours - Glass window with NEMA 3 enclosure - Disposable fiber tipped pens: red, green • Optional capabilities- 2 Programmable alarms per pen - Up to 4 relay type outputs - Up to two 4-20mA outputs - Process value retransmission - RS-485 Communications - 24V Transmitter power supply - Plastic window - NEMA 4X enclosure - Door lock • Optional controller capabilities- On-off, time proportioning, or current proportioning control

- Single or dual control output - Position proportioning for use with slidewire

feedback - Relay, SSRD, or mA outputs - Remote setpoint input

SPECIFICATIONSMeasurement Accuracy +/- 0.25% Recording Accuracy +/- 0.5% Scan Time 1 Scan per second Relay Outputs 5A SPSTDimensions 16.77” H x 14.12” W x 7.75” D

12.7” square panel cutout Power 115 or 230 (optional) VAC powered Warranty 2 Year warranty Agency Approvals UL Listed for USA

cUL Certified for Canada

A general purpose, microcontroller based, oneor two pen, 12” circular chart recorder available intwo versions; basic recorder and recording con-troller. The controller is capable of controlling anyprocess from simple on/off to dual 4-20mA outputswith full PID on both pens. Can be panel or sur-face mounted.

NIST it


C

Reco

rder

s / D

ata

Acqu

isitio

n

324

Partlow VersaChart Circular Chart Recorders

Catalog No. Model Description PricePL9122 PL91220200001112 Input, 2 Trend / 2 Color Chart Recorder, 2 Relays, Glass Window, $2,429.00

NEMA 3 Panel Mount, 115V AC, RS232/485 CommunicationsPL9222 PL92220200001112 Input, 2 Trend / 2 Color Controller Chart Recorder, 2 Relays, Glass 2,899.00

Window, NEMA 3 Panel Mount, 115V AC, RS232/485 CommunicationsPL9144 PL9144020000111 4 Input, 4 Trend / 4 Color Chart Recorder, 2 Relays, Glass Window, 3,296.00

NEMA 3 Panel Mount, 115V AC, RS232/485 CommunicationsPL9244 PL9244020000111 4 Input, 4 Trend / 4 Color Controller Chart Recorder, 2 Relays, Glass 3,766.00

Window, NEMA 3 Panel Mount, 115V AC, RS232/485 CommunicationsNISTDL01 — NIST Traceable Certificate 200.00NISTDL02 — NIST Traceable Certificate with Data 250.00NISTDLQ01 — 2 Year NIST Traceable Certificate 300.00NISTDLQ02 — 2 Year NIST Traceable Certificate with Data 375.00

AccessoriesPL00215208 00215208 Chart Box of 100 Charts, 12”, 100 Division 21.00PL60500802 60500802 Green / Red Pen Cartridge 40.60PL60500804 60500804 Blue / Green / Red / Black Pen Cartridge 46.80PL64429601 64429601 Brackets Mounting Brackets 14.60

Standard Features• Place trend scale on any portion of the chart • Magnify any portion of the trend scale • 4 alarms per pen • Event driven display messages and/or printed chart messages • Configurable logic equations for PLC like capability • Configurable operator inputs for digital state changes via the keypad and

display • Choice of 10”, 11” or 12” charts • Chart speed from 6 to 9999 hours • Disposable 4 color cartridge is changed in seconds • Colors: red, green, blue, and black • Can be panel or surface mounted • Configurable from an IBM PC compatible • 90 to 264V AC powered Optional capabilities• Up to 8 universal isolated inputs with programmable scan rates • Up to 8 relays or SSRDs • Up to 4 isolated 4-20mA outputs • Up to 4 isolated 24V transmitter power supplies • Four 9 digit totalizers for flow applications and event counting • Math package including: simple math operations, preconfigured equa-

tions, special functions, custom curves, and timers • 4 PID control loops • RS-485 Communications • Glass or plastic windows • Door lock • NEMA 3 or NEMA 4X enclosure

SPECIFICATIONSReference Accuracy +/- 0.025% Universal isolated Thermocouple, RTD, volt, mV, mA, switch sensing inputs 16 Input samples per second Relay Outputs 5A SPST Dimensions 16.77” H x 14.12” W x 7.75” D

Fits 12.7” square panel cutout Warranty 2 Year warranty Agency Approvals UL Listed

cUL Certified for Canada Immunity/Susceptibility - CE - Complies with EN50082-1 Emissions - CE - Complies with EN55011 Hazardous Locations - ETL Listed Class 1 and 2,Division 2 and Class 3, Division 1 and 2

The world’s first circular chart recorder that prints bril-liant 4 color trend lines, scales, and alphanumeric data onplain paper charts. All time lines are printed straight,rather than curved, and printed on even time intervals forimproved readability and easy time determination. Alltrend lines are synchronized; no drag pen time offsets.Brilliant, easy to read, 40-character vacuum fluorescentdisplay shows values in a variety of user configurable for-mats. Available in two versions; basic recorder and record-ing controller. The controller is capable of controlling anyprocess from simple on/off to dual 4-20mA outputs with fullPID on up to 4 loops.

Full English prompts and parameter selection byEnglish choices makes this instrument easy to configure.From simple recording to sophisticated applications, merelyuse the set of features you need to provide the solution.

NIST it



C

Desktop/Flatbed Recorders

Catalog No. Model Description PriceHK8841 8841-01 HiCorder up to 16 fully isolated channels $7,785.00HK8842 8842-01 HiCorder up to 16 fully isolated channels 8,465.00HK8835 8835-01 HiCorder, high-speed waveform recorder 3,995.00HK9221 9221 Recording paper (30m, 10 rolls/1 set) for 8835 only 70.00HK9231 9231 Recording paper (30m, 6 rolls, 1 set) for 8841 and 8842 only 90.00HK9439 9439 DC power adapter for 8835-01 only (using between 10 to 28 V DC) 599.00HK9433 9433 DC power adapter for 8841 and 8842 only (using between 10 to 28V DC) 535.00HK9388 9388 Carrying case for 8835-01 only 425.00HK9349 9349 Carrying case for 8842 only 675.00HK9397 9397 Carrying case for 8841 only 535.00HK9151 9151-02 GB-IB connection cable (2m) for all HiCorders 270.00HK9152 9152-04 GB-IB connection cable (4m) for all HiCorders 275.00

SPECIFICATIONSModel 8841, 8842 Model 8835-01

Measurement ranges 5 mV to 20 V/division, 12 ranges (20 division f.s.) 10 mV to 50 V/division, 12 ranges (10 division f.s.) (using 8936 Analog Unit/option) resolution: 1/80 of range resolution: 1/160 of rangeFrequency band DC to 400 kHz, ± 3dBTime axis at memory function 100µs to 5 minutes/division, 20 ranges (1 division = 100 samples)Functions Memory recorder, Recorder, RMS recorder (50/60 Hz Memory recorder, Recorder, RMS recorder (50/60 Hz

or DC only), Recorder and Memory, FFT or DC only), *Recorder and Memory, *X-Y recorder, *FFTNumber of input channels 8-analog plus 16 logic channels:8841 (using 8936) 4-analog channels plus 16 logic channels (using 8936)using 8936, 8946 analog unit/option 16-analog plus 16 logic channels: 8841 (using 8946) 8 analog channels plus 16 logic channels (using 8946)

16-analog plus16 logic channels:8842 (using 8936)Memory Capacity 12 bits x 4 M words*/channel (using 2 channels) 12 bits x 4 M words/channel (using 1 channel)

* Memory capacity can be expanded 4 timesData Storage FDD x 1m, Type-III PC Card x 1L SRAM, flash, ATA, hard-disk cardInterfaces LAN, SCSI (for MO drive connection, standard), GP-IB, LAN, GP-IB, or RS-232C (option, using PC card)

RS-232C, external printer (option, use PC card)Recording and display 216mm x 30m, roll type thermal paper, 110mm x 30m, roll type thermal paper,

Recording speed: 25mm/s, 10.4-inch color TFT LCD Recording speed: 25mm/s, 6.4 inch color TFT LCDOther functions Scaling, Waveform parameter calculations, Memory segmentation, Cursor readout, etc.Power supply 100 to 240 V AC (50/60 Hz) *10 to 28 V DC, using 9433 DC Power AdapterDimensions, mass 280W x 300H x 140D mm, , 7.0 kg:8842 285W x 220H x 132D mm, 4.5 kg

6 kg:8841 280W x 300H x 220D mmAccessories Power cord (1), Recording Paper (1 roll), Dust cover (1), PC card protection (1), Wave viewer software (1)Units cannot be used alone. Measurement requires optional input unit or similar peripheral.

The 8841, 8842 Memory HiCorders, featuring A4-widthrecording paper and a large color display, have a unique de-sign that allows them to be used both as desktop and flat-bedrecorders. These models combine portability with high relia-bility, ensure high performance and easy operation. Settingthe standard for portable 16-channel recorders, these modelsare suitable for capturing a variety of data in countless fields.

The 8835-01 Memory HiCorder is a high-speed waveformrecorder with the special features of advanced performance ofthe basic "wave recording" function for easy field measure-ment, easy-to-see color display, compact dimensions of an A-4sized paper, and 4/8* channels for measurement. The 8835-01 Memory HiCorder inherits all the functions of the 8835Memory HiCorder and accommodates a total of 8* channelswhen used with the input unit group to support a wide rangeof signals. The 8835-01 also comes standardly equipped with8X memory of the previous unit, making long-term recordingpossible.

NIST it

Save 50%on 2nd year

recalibration

Ask about2 YearNIST


C

Reco

rder

s / D

ata

Acqu

isitio

n

326

1 and 2 Pen Compact Flatbed Recorders

Special Features of the SE111• 48 calibrated ranges with 1.5-3-6 stepping for AC/DC voltage and AC/DC current

• Voltage ranges are from 150mV to 750V with a separate input terminal for the 750V range

• Current ranges are from 0.6mA to 6A with separate input terminal for the 6A range. Ideal for the secondary side of current transformers

• Maximum potential input to ground is 750V• Recorder scale 0 to 30 with 15 divisions • Recording paper is scaled from 0 to 30 with 30 divisions

The GSE111 RecorderThe recorder is particu-

larly well suited for the ap-plications which demand alow intrinsic consumptionwhen measuring both highand low currents. TheGSE111 offers a total of 48calibrated ranges measur-ing both AC and DC volt-ages and currents. Rangesfrom 0.6 mA to 1.5 A areprovided complete withfuse protection. A 6 amprange is designed withoutinterruption making itsuitable for connection to asecondary side of currenttransformers. Voltageranges from 150mV to300V enable the GSE111 tomeasure from the low volt-ages in a laboratory envi-ronment to the convention-al commercial voltages.The 750V range can beused to make direct mea-surements and recording ofvoltages in power supplysystems and power distrib-ution networks.

SPECIFICATIONSSE111Digital Display Liquid crystal display, 31⁄2 place (1 pen models)

Display Area 47 mm x 14 mm, digit height 9 mmDisplays: Measures values, polarity and overload0.3%; range 0.15 V: 0.66%Accuracy 1% from full scale value

Measurement 0,15-0,3-0,6-1,5-3-6-15-30-60-ranges 150-300 V DC/AC(calibrated) 750 V DC/AC via separate terminal

0,6-1,5-3-6-15-30-60-150-300-600-1500 mA DC/AC6 A DC/AC via separate terminalAccuracy 0.2% of reference value

Accuracy Ranges VDC: 1% from full scale valueRanges 0.15: 300 V AC:1,5% from FSV at 50: 60 Hz sinus3% of FSV at <60 Hz: 10 kHz6% of FSV at <10 kHz: 20 kHz750 V range:1,5% of FSV at 50: 60 Hz sinusRanges A DC: 1% from FSVA AC ranges:2% from FSV at 50: 60 Hz sinus4% of FSV at <60 Hz: 10 kHz8% of FSV at <10 kHz: 20 kHz

Paper Feed Drive by quartz-controlled and µP monitored stepping motorSpeed 12 feed speeds selectable by switch

1-3-6-12-30-60 cm/hr1-3-6-12-30-60 cm/min

Dead band 0,3% from full scale valueLinearity 0,25%Attenuation According to DIN 43 782; overshooting/rounding = 1% of recording widthRecording speed Approximately 20 cm/sCutoff frequency Approximately 1 HzProtocol Prints out charge status and subsequent printout of preselected measurement (1 pen models) parameters on the recording paper, according to the deflection direction of the

recording pen. Actuation by switch on operating panel. Character size 5 mm

Catalog No. Model Description PriceBB110602 GSE111 Compact flatbed recorder for voltages & current $1,811.00BB110621 GSE111-02 Compact flatbed recorder for voltages & current 2,535.00

2 pen versionAccessories

BB111605 GA697-75-10 SE111 roll paper (packs of 10) 100.00BB09 GKS17 Test leads, pins & clips 36.00BB100417 GA536-74 Pack of 5 red pens, channel 1 13.50BB100418 GA536-75 Pack of 5 blue pens, channel 2 13.50NISTRC1 — NIST Traceable Certificate 125.00NISTRC2 — NIST Traceable Certificate with Data 199.00

NIST it

Features digital display and protocol printing

• Records on roll chart or singlesheet paper with a maximum penspeed of 20 cm/s

• A printing protocol completely doc-uments each recording with chartspeed and recorder set up (1 pen models)

• Recorder can operated indepen-dent of main power thanks tooptional integrated, rechargeablebatteries

• Quartz/µp control chart speeds areswitch selectable from 1 cm/hr to60 cm/min

• The transparent plastic lift-up,removable dust cover protects therecorder without interfering with theprinting process

• A 3 1/2" digit digital LCD providesan immediate display of inputvalue, polarity and overflow displayon 1 pen models

Save 50%on 2nd year

recalibration

Ask about2 YearNIST



C

Flatbed Recorders

Catalog No. Model Description PriceKN42112 BD111 Single Pen Flatbed Recorder $1,682.00NISTRC1 — NIST Traceable Certificate 125.00NISTRC2 — NIST Traceable Certificate with Data 199.00

Chart PaperKN42115 XR-9 Chart Rolls, Linear Graduations, 86.00

10 Rolls/Box

Disposable Pens for Channel 1 of Flatbed RecordersKN42117 XR12/1 Red, Box of 6 29.00KN42118 XR12/2 Blue, Box of 6 29.00KN42119 XR12/3 Green, Box of 6 29.00KN42120 XR12/4 Black, Box of 6 29.00

Disposable Pens for Channel 2 of BD112 RecordersKN42121 XR13 Red, Box of 6 29.00KN42122 XR13B Black, Box of 6 29.00

SPECIFICATIONSInput Ranges 1mV to 20V in 14 calibrated steps (1-2-5)Variable Ranges 40 to 100% FSAccuracy Of Span Better than 0.3% FSNon-Linearity Better Than 0.3% FSDead Zone <0.2% FSPen Response Time <0.2 sec for 5 to 99% FSInput Impedance 1 MΩ DC

10KΩ in series with 1.5m+cF for ACInput Floating, non symmetricInput Bias Current <5 nAIsolation Between channel and between channel and power supply

more than 50MΩMaximum Input Voltage On input terminals 42VDC/30VAC max.

Between channels 500VDC max.Common Mode Rejection 130 dBZero Adjustment -50 to + 150% FSZero Position Selectable right hand or left hand side on the paperZero Suppression 6 calibrated steps -100, 0, + 100 to + 500% FSZero Drift <1 m+cV/°CChart Speeds 0.1-0.2-0.5-1-2-5-10-20 mm/min or mm/secTimebase Crystal or mains synchronizedChart Paper 25 m rolls according to DIN 16230Chart Life 4100 hr at lowest chart speed-20 min at highest chart speedExternal Output TTL level signal, paper moves 0.05 mm per pulse.

Dividend set with chart speed selector (1, 2, 5, 10, 20, 50, 100, 200 x1, x60)

Pen Lift Electric. Pens are lifted automatically if the chart has not been moved for more than 30 seconds

Safety According to CSA/C22-2 and VDE 411Disturbance According to FCC, class BAmbient Temperature Range Operating -10 to + 40° C

Storage -40 to + 75° CHumidity 35-85% RH, non condensingPower Supply Selectable 110V/220V -15% + 20%; 5060/Hz

30VA single channel50VA dual channel

Built According To CSA and VDEDimensions 380 x 290 x 90 (W x D x H) mm3Weight 3.5 kg unpacked

• Zero Suppression (-1 to + 5 time FS)• “Home” Function• “Grid” Function• Event Markers• Electric Pen Lift• 13 Input Ranges (1mV to 10V)

NIST it


C

Reco

rder

s / D

ata

Acqu

isitio

n

328

Rustrak Model 288 Strip Chart Recorder

Catalog No. Model Description PriceRK991710 PLRA14000156 1 Channel Strip Chart Recorder, 0 -10V DC Input, $516.00

120V AC 60Hz Power, 2RPM Motor, #1 Gear TrainRK991703 PLRA31000156 1 Channel Strip Chart Recorder, 0 -1mA DC Input, 494.00

120V AC 60Hz Power, 2RPM Motor, #1 Gear TrainRK991704 PLRA38000156 1 Channel Strip Chart Recorder, 4 -20mA DC Input, 516.00

120V AC 60Hz Power, 2RPM Motor, #1 Gear TrainNISTDL01 — NIST Traceable Certificate 200.00NISTDL02 — NIST Traceable Certificate with Data 250.00NISTDLQ01 — 2 Year NIST Traceable Certificate 300.00NISTDLQ02 — 2 Year NIST Traceable Certificate with Data 250.00

• Chart speed from 1/8” to 30” per hour • Ranges from 10 m A to 1 A • Internal paper take-up or top exit • Optional capabilities- Chart speed from 1/48” to 240” per hour - Single and dual event recording - 2W – Two recorders in one package - On-off switch - Low voltage DC powered

SPECIFICATIONSRecording accuracy +/- 2% Response time 1 second Dimensions 5 5/8” H x 3 5/8” W x 4 5/16” D Power 115 or 230 (optional) VAC powered Warranty 1 Year warranty

NIST it

The Model 288 is a general purpose, onepen, 2 5/16” strip chart recorder for DC volt-age and current. Available in freestanding,panel mount, and flush mount configurations.Uses pressure sensitive chart paper.



C

• 1-4 continuous trace with annotation option (4103C), 6-color multipoint (4103M)

• Up to 4 analog outputs • Contact event inputs• Up to 16 relay outputs• Roll or z-fold chart• 4-color digital display with analog bar graphs• Front panel or remote PC configuration• Universal isolated inputs• Math, timers, counters and totalizers• PC card reader• Modbus® /Profibus communications• 9.3" total depth behind panel• Remote file transfer• Transmitter power supply

100mm Programmable Strip Chart Recorder NIST it

Catalog No. Model Description PriceCH410311 4103C One Channel Recorder $1,330.00CH410312 4103C Two Channel Recorder 1,675.00CH410313 4103C Three Channel Recorder 2,045.00CH410314 4103C Four Channel Recorder 2,425.00CH410322 4103M Two Channel Recorder 1,900.00CH410323 4103M Three Channel Recorder 1,950.00CH410326 4103M Six Channel Recorder 2,100.00All recorders are equipped with Z-fold chart cassettes, 50 chart divisions and are 90-264 VAC poweredOptionsCH4103335 — Alarm relays—Three Form C SPDT (one card) 210.00CH3030 — Z-fold chart paper 17.00CH41002 — Printhead for ‘M’ Models (cartridge) 64.50CH410031 — Individual pen for ‘C” Models (Blue) 17.00CH410032 — Individual pen for ‘C” Models (Red) 17.00CH410033 — Individual pen for ‘C” Models (Green) 17.00CH410034 — Individual pen for ‘C” Models (Violet) 17.00NISTRC12 — NIST Traceable Certificate 200.00NISTRC13 — NIST Traceable Certificate with Data 250.00NISTRCQ12 — 2 Year NIST Traceable Certificate 300.00NISTRCQ13 — 2 Year NIST Traceable Certificate with Data 375.00

The 4103C and M models of chart recorder offeradvanced features, such as math capabilities, seri-al communications and data archiving in a com-pact 100mm (4") format. Handling up to six inputs(four for 4103C) the units give clear data handlingwith high visibility displays and superior chartannotation.

Save 50%on 2nd year

recalibration

Ask about2 YearNIST


C

Reco

rder

s / D

ata

Acqu

isitio

n

330

Fuji Electric offers the latest in low-cost inkjetrecording with the PHE Inkjet Series Recorder.This 100mm recorder, built with polymer plasticmold technology to make it lightweight anddurable, boasts many useful features. The PHE,which is available in one or two channel recording,offers continuous analog trending on the same axiswhich eliminates the phase shift syndrome exhib-ited by conventional pen recorders. In addition, ithas many digital printing capabilities—periodicdata, scale line, alarm condition, burnout, and pa-rameter printing.

Featuring an affordable inkjet print mechanismin a strip chart recorder, the PHE prints crisp, no-smudge characters without physical contact withthe paper. This printhead sprays the ink in tinydots to create a trace in vivid colors for one or twochannel continuous recording. Utilizing a piezo-electric element, the PHE recorder creates stun-ning reports and print quality for the same priceas a pen recorder.

While analog pen recorders have many movingparts and frequently require maintenance and re-pairs in order to keep them in working condition,the PHE recorders are extremely reliable and willgive you years of trouble-free operation becausethey have a third of the parts of conventional stripchart recorders. If that’s not enough, the PHE isbacked by a two-year warranty.

So, if you’re looking for an economical recorderthat offers many of the features found in higher-priced instruments, look no further than the FujiElectric PHE.

Strip Chart Recorders1- or 2-Channel inkjet Strip-Chart recorder

Catalog No. Description PriceFJPHE1 1-Channel Inkjet Strip-Chart Recorder $949.00FJPHE2 2-Channel Inkjet Strip-Chart Recorder 1,349.00FJ1001 Recording Head 85.00FJ5000 Chart Paper 1 Box (6 pkg.) 100.00

• Inkjet printing technology without physical contact with the paper• Low-cost• Available in one or two channel continuous trace• Continuous analog trending on the same axis• Many digital printing capabilities• Built with polymer plastic mold technology• The PHE offers many of the features found in higher-priced

instruments• Three-year warranty

SPECIFICATIONSInput Points 1 or 2 continuous recordingInput Signals

Thermocouple Input B, R, S, K, E, J, T, N, W, L, U, PNRTD Input Pt 100ΩDC Voltage Input 50mV, 500mV, 5V, 50V rangeDC Current Input 4 to 20mA, converted into voltage

with 10Ω or 250Ω shunt resistorMax. Allowable Input Voltage

Thermocouple, RTD and DC Voltage ± 10V DC or less(50mV, 500mV range)DC Voltage Input (5V, 50V range) ± 100V DC or less

Recording Method Inkjet type, 3 colorsRecording Points 1 or 2 continuousChart Paper Effective width: 100mm,

Z-folding type, length–15.08mMeasuring Cycle 200msec/pointRecording Accuracy Indicating accuracy ± 0.2%Chart Speed 10, 20, 24, 30, 50, 120, 200, 300,

400, 1000, 1200, 1500mm/hour,set from the keyboard

Rated Power Supply Voltage 100 to 120 VAC or 200 to 240 VAC

Range of Operating Voltage 85 to 132 VAC or 180 to 264 VAC

Supply Frequency 50/60HzExternal Dimensions (WxHxD) 5.67 x 5.67 x 6.89in.

(144 x 144 x 175mm)Panel Cutout 137mm x 137mm (+ 1.5, -0)

Save 50%on 2nd year

recalibration

Ask about2 YearNIST



C

Why use dot-matrix or fiber-tip pen printingwhen Fuji Electric’s patented, cutting-edge recording technology offers an affordable inkjetrecorder? With an excellent rating for measuringrange accuracy and analog trace accuracy, and athree-year warranty.

The PHC Series (100mm) and the PHA Series(180mm) recorders offer brilliant six color record-ing utilizing Fuji Electric’s patented inkjet mecha-nism. Tiny piezo elements electronically dispensesmall dots of colored ink, 0.3mm in diameter, ontothe chart paper. This non-contact printing ad-vancement traces vibrant trend lines and printssharp alphanumeric characters.

This technology, previously availableon expensive printers only, now comesin a strip chart recorder at an afford-able price. If you note the difference inprint quality between the dot-matrixand the inkjet typefaces, you’ll con-clude there’s simply no reason to use adot-matrix type recorder anymore.

The inkjet cartridges have a long lifeof up to 6 months of continuous operation. Eachchannel is assigned its own color, and reports gen-erated in reference to that channel are printed inthe corresponding color. As this method of printingrequires only one mechanism, these recorders re-quire fewer moving parts than conventionalrecorders — that means years of extremely reli-able, trouble-free operation for you.

As each channel has its own 16-bit A/D convert-er, these instruments offer high speed sampling ofthe input signal. Furthermore, these recordersare fully programmable from their easy-to-read,fluorescent front panels for a variety of parame-ters such as:

• Pass code• Main and Sub chart speeds• Record mode — trend/logging• Recording range• Input signal• Tag number• Communication parameters• Ink monitor status• Language (English, French, or German)• List print request• Daily report, date and time, and alarm settings• Illumination status• And more...

Strip Chart RecordersStrip Chart Recorders with Brilliant Six-Color Printing

Inkjet

Dot Matrix

Catalog No. Description PricePHA98003-EAOYV 12-Channel Recorder $3,450.00PHC66003-AAOYV 6-Channel Recorder 2,250.00PHZK8701 12 Alarm output/external 580.00

control unit for the PHA series PHZK1601 6 Alarm output/external 320.00

control unit for the PHC series FJ1001 Recording head 85.00PEX00PLI-5000B 100 mm paper 100.00PEX00BLI-1000B 180 mm paper 100.00

• Powerful Set of Printing andRecording Features

• Front Panel Programming• Large Fluorescent,

Multi-Language Display• Non-Contact, Inkjet Printing• One Mechanical Assembly for

Printing

• Side-by-Side Mounting• Logging Mode• Daily Report• Zoom, Zone and Auto

Range Trace• Three-Year Warranty

SPECIFICATIONSUniversal Input Points

PHA 6 or 12 continuous recordingPHC 3 or 6 continuous recording

Input Signal Accuracy ResolutionThermocouple & RTD (J, K, T, ±(0.15% + 1 digit) 0.1°CR, S, E, N, B, W, I, U, PN & Pt100)DC Voltage -50 to 50mV ±(0.15% + 1 digit) 10 µV

-500 to 500mV ±(0.15% + 1 digit) 100 µV-5 to 5V ±(0.15% + 1 digit) 1 mV-50 to 50V ±(0.15% + 1 digit) 10 mV

Max. Input VoltageThermocouple, RTD and ± 10 VDC or lessDC Voltage (50mV, 500mV Range)DC Voltage Input (5V, 50V Range) ± 100 VDC or less

Writing System Inkjet system, 6 colorsChart Width PHA PHC

180mm 100mmChart Length (Z-fold) PHA PHC

65.6ft (20m) 49.5ft (15.08m)Chart Speeds* PHA PHC

Continuous Recording 5-300mm/hour 5-400mm/hourDotting Recording 301-1500mm/hour 401-1500mm/hour

Case Size PHA PHCBezel 11.34” x 11.34” 5.67” x 5.67”

(288 x 288mm) (144 x 144mm)Depth 7.84” (199mm) 7.84” (199mm)Cutout 11.06” x 11.06” 5.39 x 5.39”

(281 x 281mm) (137 x 137mm)* Can be set in 1mm/hour steps


C

Reco

rder

s / D

ata

Acqu

isitio

n

332

Memory Data Loggers

Catalog No. Model Description PriceMS121140 50HR-U2-BR Memory Data Logger, Analog Input (16 points, T/C, RTD, Voltage) $2,850.00MS121141 50HR-U3-BR Memory Data Logger, Analog Input (8 points, T/C, RTD, Voltage) 2,450.00

AccessoriesMS121143 50HR-D10 Digital I/O unit, 16-bit logic input, 16-channel output) 495.00MS121144 50HR-RSC RS-232C Cable Mini DIN 9-pin - Dsub 9-pin, 1.5 m (4.92 ft) length 50.00MS121145 50HR-P1C Connector Cord for pulse input, 1.5 m (4.92 ft) length 30.00MS121146 50HR-BAT Battery Pack, 7.2V, 2400 mAh 140.00MS121147 50HR-PR Printer unit, prints up to 100mm (3.94 in) wide 425.00MS121148 MSRPAC Recording Software (free with 50HR-U2, U3) N/CMS121142 73ET-M2 PC Recorder (Panel mount, color 5.7 inch LCD touch screen panel) 2,300.00

OS: WindowsCE, external Compact Flash memory card, Ethernet interfaceNISTDL01 — NIST Traceable Certificate 200.00NISTDL02 — NIST Traceable Certificate with Data 250.00

The 50HR has been developed tomeet the demand for a temperaturerecorder with multi-channel record-ing capability.

• Real-Time Storage to High Capacity Memory Cards• Collect Data on a PC via Ethernet• Analog and Temperature Inputs Fully Isolated• Control up to 16 instruments via LAN connection• Color LCD Graphical Display Shows Data Trends

NIST it

73ET



C

Graphic Data Acquisition Recorders

Catalog No. Model Description PriceCH6001 5100E Graphic Data Acquisition Recorder, 6 channels with Windows® software $1,595.00CH600 5100V Graphic Data Acquisition Recorder, 6 channels with Windows® software 2,250.00CH1201 5100V Graphic Data Acquisition Recorder, 12 channels with Windows® software 2,900.00CH1200 5180V Graphic Data Acquisition Recorder, 12 channels with Windows® software 3,800.00CH2400 5180V Graphic Data Acquisition Recorder, 24 channels with Windows® software 4,600.00CH3600 5180V Graphic Data Acquisition Recorder, 36 channels with Windows® software 5,400.00CH2401 — 1Gb Memory Card 720.00CH2402 — 20 Mb Flash ATA Card 350.00NISTDL01 — NIST Traceable Certificate 200.00NISTDL02 — NIST Traceable Certificate with Data 250.00

SPECIFICATIONS5100E 5100V 5180V

No inputs 6 6 or 12 6 to 48Display type 5” Standard Color 5.5” (139.7 mm) (1/4 VGA) TFT Color LCD 12.1” (307.34 mm)(SVGA) TFT color LCDUser interface Touch Touch sensitive screen Touch sensitive screenConfigurable • • •Relay outputs Fixed-1 3 to 12 3 to 27Communications Ethernet Ethernet EthernetDatalogging • • •Archive media ATA & compact flash or 3.5” disk ATA & compact flash or 3.5” disk ATA & compact flash or 3.5” diskTotalizer, timers and counters Optional (Limited) Optional Optional

NIST it

5180V5100V

• Ethernet enabled• FTP and Modbus® TCP/IP• Touch Screen operation• Custom screens• Plant mimic

• Local or network archiving• PC based configuration program• Live remote view on PC• Universal inputs• 125ms input scan rate

The Series 5000 uses the very latest in RISCprocessor technology to give a powerful platform now and for the future. Communication viaEthernet makes it an industry standard network-ing tool–process data has never been so easilyavailable while still maintaining integrity and se-curity.

The units offer unrivaled input accuracy with a125ms total sample rate for up to 48 input chan-nels. All have onboard Flash data storage capabil-ity, Ethernet communication and either a PC card or floppy disk reader. All data is stored in a tam-per-proof binary format that can be used for se-cure, long-term records of your process. The 5000series is truly designed for today’s network world,units can be accessed via a Local Area Network,dial-up connection, Intranet or Internet.

5100E

Save 50%on 2nd year

recalibration

Ask about2 YearNIST


C

Reco

rder

s / D

ata

Acqu

isitio

n

334

2, 4 or 6 Channel Paperless Recording Systems• 2, 4 or 6 direct universal inputs: DC voltage, current, thermocouples,

RTD and dry contact• Serial output RS232 or RS485 (optional)• Ethernet 10 Base T option available• High speed storage capability: up to 8 samples per second/channel• Multiple storage media options: 3 1/2" 1.44Mb disk, 100Mb Zip™ disk

or ATA Flash PCMCIA card up to 200Mb (optional)• 5.6" Brilliant TFT active matrix color display or 5" monochrome display• Intuitive Touchscreen Control with anti-glare coating• 6 relay contact or solid state relay outputs/3 digital control input• Parallel printer output (optional)

NIST it

Catalog No. Channels Monochrome Display Active Color Matrix Display 6-Relays outputs 3 Digital Inputs PriceMI2120 2 Yes No No $1,395.00MI2121 4 Yes No No 1,495.00MI2122 6 Yes No No 1,695.00MI2123 2 Yes No Yes 1,690.00MI2124 4 Yes No Yes 1,790.00MI2125 6 Yes No Yes 1,990.00MI2126 2 No Yes No 1,995.00MI2127 4 No Yes No 2,095.00MI2128 6 No Yes No 2,295.00MI2131 2 No Yes Yes 2,290.00MI2129 4 No Yes Yes 2,390.00MI2130 6 No Yes Yes 2,590.00AccessoriesMI445674 SW-3T Windows based software program 199.00MI445677 5700-200 Portable serial printer 495.00MI445678 — Optional Ethernet (10 Base T) Communication 150.00NISTDL01 — NIST Traceable Certificate 200.00NISTDL02 — NIST Traceable Certificate with Data 250.00NISTDLQ01 — 2 Year NIST Traceable Certificate 300.00NISTDLQ02 — 2 Year NIST Traceable Certificate with Data 375.00

SPECIFICATIONSInput Signals DC Voltage: Linear, industrial square root, logarithmic Full Scale Ranges: ± 150mV, ± 1.25V, ± 2.5V, ± 12.5V and ± 25V Accuracy: 0.05%

DC Current: 4-20mA, 0-20mA and 10-50mA Accuracy: ± 0.1% using external 50ohm shuntThermocouple Resolution 0.1°C RTD Base Accuracy: 0.2% or 0.5°C (1°F). Resolution 0.1°CType Thermocouple burnout detection 2 or 3 wire connection. Cable compensation to

± 50ohm open and short circuit detectionJ 0.1% J -210 to 1200°C ± 1.5°C -340 to 2190°F ± 3.0°F 10 ohm Cu -70 to 170°C -94 to 338°FK 0.1% K -270 to 1372°C ± 1.5°C -450 to 2500°F ± 3.0°F 100 ohm Pt 385 -200 to 850°C -364 to 1560°FT 0.2% T -270 to 400°C ± 1.5°C -450 to 750°F ± 3.0°F 100 ohm Pt 392 -180 to 820°C -292 to 1500°FE 0.11% E -270 to 1000°C ± 1.5°C -450 to 1832°F ± 3.0°F 200 ohm Pt 385 -200 to 400°C -364 to 750°FR 0.16% R -50 to 1768°C ± 3.0°C -58 to 3200°F ± 6.0°F 200 ohm Pt 392 -180 to 400°C -292 to 750°FS 0.17% S -50 to 1768°C ± 3.0°C -58 to 3200°F ± 6.0°F 120 ohm Ni -70 to 300°C -94 to 570°FB 0.22% B 0 to 1820°C ± 4.0°C 32 to 3300°F ± 7.0°F 1000 ohm Ni -60 to 209°C -76 to 708°FC 0.13% C 0 to 2400°C ± 3.0%C 32 to 4350°F ± 6.0°F (DIN 43760)N 0.10% N -270 to 1300°C ± 1.5°C -450 to 2372°F ± 3.0°FRecording Rates Selectable from 8 sec. to 10 minutesInternal 1 Mb RAM (Non-Volatile)Power Requirements 100 to 250VAC, 50/60Hz or 125 to 300VDC, 35VA max.Wash Down IP65 Front panel onlyAlarm Contacts 3 or 6 isolated Form C, 3 amp @ 250VAC or 26VDCRemote Inputs 3 isolated inputs, user selectable as dry contact or 5 to 12VDC activatedCommunications ESD protected RS232 with full hand shaking. Supports Modem or isolated RS485 port (optional); Ethernet: 10 Base T (optional)

Save 50%on 2nd year

recalibration

Ask about2 YearNIST



C

6 & 12 Channel Paperless Recording Systems

Catalog No. Channels Monochrome Display Color Active Matrix Display 6-relay outputs and 3 digital inputs PriceMI5600 6 Yes No No $1,995.00MI5120 12 Yes No No 2,520.00MI5601 6 Yes No Yes 2,290.00MI5121 12 Yes No Yes 2,815.00MI5610 6 No Yes No 2,495.00MI5122 12 No Yes No 3,020.00MI5602 6 No Yes Yes 2,790.00MI5123 12 No Yes Yes 3,315.00AccessoriesMI445674 SW-3T Windows based software program 199.00MI5134 5700-200 Portable Serial Printer 495.00NISTDL01 — NIST Traceable Certificate 200.00NISTDL02 — NIST Traceable Certificate with Data 250.00

• 6 or 12 direct universal inputs plus math channels: DC volt-age, current thermocouples, dry contact and RTD’s

• Recording Rates: User programmable from 4 samples persecond to 1 sample every 600 seconds

• Storage media options: 3 1/2” 1.44 Mb disk (standard) ATAFlash PCMCIA card up to 200Mb (optional)

• 5.6" Brilliant TFT active matrix color display or 5" monochrome display

• Intuitive Touchscreen Control with anti-glare coating• Standard DIN enclosure: 144 mm x 144 mm bezel IP65

front bezel• Serial output options: RS232 standard or RS485 optional• Internal memory 1 Mb Ram Standard• Optional Alarm Contacts: 3 or 6 isolated Form C, 3 amp @

250VAC or 26 VDC• Optional Remote inputs :3 isolated inputs, user selectable

as dry contact or 5 to 12 Vdc activated• 250 msec sample rate per channel

SPECIFICATIONSInput Signals DC Voltage: Linear, Industrial square root, logarithmic Full Scale Ranges: +/- 100mV, +/-1V, +/-2.5, +/- 10V and +/- 25V Accuracy: 0.05%

DC Current: 4-20mA, 0 to 20mA and 10 to 50 mA Accuracy: +/-0.1% using external 50 ohm shuntThermocouple Resolution 0.1°CType Accuracy Thermocouple burnout detectionJ 0.1% J -210 to 1200°C +/- 1.5°C -340 to 2190°F +/-3.0°FK 0.1% K -270 to 1372°C +/-1.5°C -450 to 2500°F +/-3.0°FT 0.2% T -270 to 400°C +/-1.5°C -450 to 750°F +/-3.0°FE 0.11% E -270 to 1000°C +/-1.5°C -450 to 1832°F +/-3.0°FR 0.16% R -50 to 1768°C +/-3.0°C -58 to 3200°F +/-6.0°FS 0.17% S -50 to 1768°C +/-3.0°C -58 to 3200°F +/-6.0°FB 0.22 B 0 to 1820°C +/-4.0°C 32 to 3300°F +/-7.0°FC 0.13% C 0 to 2400°C +/-3.0°C 32 to 4350°F +/-6.0°FN 0.10% N -270 to 1300°C +/-1.5°C -450 to 2372°F +/-3.0°FRTD: Base accuracy 0.2% or 0.5°C (1°F). Resolution 0.1°C 2 or 3 wire connection. Cable compensation to +/-50 ohm open and short circuit detection.10 ohm Cu -70 to 170°C -94 to 338°F100 ohm Pt 385 -220 to 850°C -364 to 1560°F100 ohm Pt 392 -180 to 820°C -292 to 1500°F200 ohm Pt 385 -220 to 400°C -364 to 750°F200 ohm Pt 392 -180 to 400°C -292 to 750°F120 ohm Ni -70 to 300°C -94 to 570°FPower Requirements 90 to 132, 180 to 250VAC, 50/60 Hz or 125 to 300VDC, 35 VA Max.Safety UL (3111-1) cUL (IEC1010-1) CE low voltage directive 73/23/EEC. Complies with EN 61010-1Wash Down IP65 Front Panel Only

NIST it


C

Reco

rder

s / D

ata

Acqu

isitio

n

336

DataloggersData Logging Made Simple...Simple Logger®

• No user setup required — one button operation• Log and measure Amps rms, Volts rms, Temperature,

DC Volts, DC Amps• Autosampling up to 4096/hr — provides for maximum

information• Stores over 8000 readings• Auto-scaling — provides for optimum resolution

for the recording session• Innovative Time Extensive Recording™ (TXR™)

technique provides continuous recording for anylength of time without user setup

• Low power — records for up to one year using a9V Alkaline battery

Software Features• Windows® based graphing and analysis software

included with each Datalogger• Statistics appear on screen: Max, Min, Avg,

Data and Time• On-Line display of Datalogger values• Zoom capability with automatic statistics update• Export data to spreadsheet and database applications• Print both graph and tabular listings• Paste graphs into other applications• Programmable scale and units for all DC loggers

Automatic selection for AC loggers

Common FeaturesSample rate: 4096/hr maximumResolution: 8 to 12 bitData storage: 8192 to 65,536 Readings

(depending on model)Power: 9V Alkaline batteryOutput: RS-232 via DB9 connectorIndicator: Red LED flashes once every 2 seconds in

STANDBY mode, twice every 2 seconds inLOGGING mode, and is off in OFF mode

Controls: One membrane switch used to start and stoprecording sessions and to turn the Datalogger onand off

EnvironmentalOperating Temperature: -4 to + 158°F (-20 to + 70°C)Storage Temperature: -40 to + 176°F (-40 to + 80°C)Relative Humidity: 5 to 95% non-condensing

Simple Logger® is a single channel, low costDatalogger that requires no user setup. It has theability to automatically adjust both its scale rangeand its sample rate to optimize the recording ses-sion. Simple Logger® includes a Windows® basedsoftware package that can plot, analyze recordingdata and print graphs and data listings.

The main advantage of Simple Logger® is itsability to perform a wide variety of recordingtasks with high resolution and accuracy withoutthe need for user setup. It achieves this by meansof automatic scaling and Time ExtensionRecording™ (TXR™) along with a flexible input de-sign.

Simply connect the logger to the signal to berecorded and press the button to begin recording.When the session is complete press the button tostop. It is that simple!

• Machine load monitoring • Metering CT re-sizing• Temperature monitoring • HVAC troubleshooting• Computer room monitoring • Food storage/Refrigerated freight • Wave soldering • Process control monitoring• Railroad signal monitoring • Surge/sag monitoring• Line voltage/Stray voltage monitoring • Load profiling

Typical Applications:

On-line display of data

Automatic update of Y dataat cursor position

Plot area with value and timedata shown on the X and Y axis

Graph StatisticsAnnotate button

Click the annotate button to add a title and descriptiveinformation to your graph. This information can be storedand printed with a graph. Plot graphs and view statistics quickly

and easily when you download data fromSimple Logger® to your computer. Scaleand time axis update automatically.

Click and drag your mouse to zoom upthe desired area of the graph for betterviewing the Min, Max and average statis-tics at the bottom of the graph updateautomatically with zoom window.

Click the annotate button to add a titleand descriptive information to your graph.This information can be stored and print-ed with the graph.

Save 50%on 2nd year

recalibration

Ask about2 YearNIST



CCatalog No. Model Description PriceAE916111 L100 Simple Logger® Model L100 (RMS Current, 0 to 1Vac Input) $279.00AE916112 L110 Simple Logger® Model L110 (RMS Current, 0 to 1Aac Input) 279.00AE211605 L205 Simple Logger® Model L205 (Stray Voltage w/Leads, 0 to 25.5Vac Input) 289.00AE211607 L215 Simple Logger® Model L215 (RMS Voltage, 0 to 250Vac Input) 289.00AE211606 L220 Simple Logger® Model L220 (RMS Voltage, US 3 prong wall plug in 0 to 255Vac Input) 299.00AE916113 L230 Simple Logger® Model L230 (RMS Voltage w/Leads, 0 to 300Vac Input) 299.00AE916114 L260 Simple Logger® Model L260 (RMS Voltage w/Leads, 0 to 600Vac Input) 299.00AE211397 L320 Simple Logger® Model L320 (DC Current, 4 to 20mAdc Input) 199.00AE211405 L410 Simple Logger® Model L410 (DC Voltage, 0 to 100mVdc Input) 209.00AE211407 L430 Simple Logger® Model L430 (DC Voltage, 0 to 10Vdc Input) 209.00AE916116 L605 Simple Logger® Model L605 (Temperature, Temperature-Internal/External Thermistor) 209.00AE211615 L610 Simple Logger® Model L610 (Temperature, J Thermocouple) 209.00AE211616 L620 Simple Logger® Model L620 (Temperature, K Thermocouple) 209.00AE211617 L630 Simple Logger® Model L630 (Temperature, T Thermocouple) 209.00AE211611 CL600 Simple Logger® Model CL600 (Clamp-On, RMS Current, 0 to 600Arms Input) 369.00AE211372 AL24-2500 Simple Logger® Model AL24-2500 (RMS Current, 250/2500A, 24" AmpFlex™) 499.00AE211373 AL36-2500 Simple Logger® Model AL36-2500 (RMS Current, 250/2500A, 36" AmpFlex™) 599.00AE211374 AL24-5000 Simple Logger® Model AL24-5000 (RMS Current, 500/5000A, 24" AmpFlex™) 659.00AE211375 AL36-5000 Simple Logger® Model AL36-5000 (RMS Current, 500/5000A, 36" AmpFlex™) 759.00NISTDL30 — NIST Traceable Certificate 125.00NISTDL301 — NIST Traceable Certificate with Data 199.00NISTDLQ30 — 2 Year NIST Traceable Certificate 187.00NISTDLQ31 — 2 Year NIST Traceable Certificate with Data 298.00

AC Current Loggers

True RMS measurement with recessed safety bananajack input, optional current probe required

Model L100 0 to 1Vrms input0 to 10,000Arms based on probe

Model L110 0 to 1Arms input0 to 3,000Arms based on probe

AC Voltage LoggersTrue RMS measurement withrecessed safety banana jackinputs

Model L2050 to 25Vrms input(stray voltage)

Model L2300 to 300Vrms input

Model L2600 to 600Vrms input

AC Exception VoltageTrue RMS measurement tocapture short term events suchas sags, swells and dropoutconnection via recessed safetybanana jacks

Model L215 0 to 250Vrms

Plug-In AC Voltage LoggerPlugs directly into 120V wall out-let. Records line to neutral orneutral to ground voltage —switch selectable

Model L2200 to 255Vac

Process loggers — availablewith thermocouple, thermistor,4 to 20mA and DC voltage inputs

Thermocouple LoggersConnection via color-coded miniaturethermocouple jacks

Model L610 (Type J) 32 to 1382°F (0 to 750°C)

Model L620 (Type K) -328 to 2282°F(-200 to + 1250°C)

Model L630 (Type T) -328 to 662°F(-200 to + 350°C)

Thermistor LoggersMeasures temperature with internal or external thermistor

Model L605 Internal or External ThermistorInternal -4 to + 158°F (-20 to 70°C)Internal/External -4 to + 212°F (-20 to 100°C)

4-20mA LoggerAutoranging, programmable scale and units with stan-dard terminal strip input

Model L320 0 to 25mAdc

DC Voltage LoggerSProgrammable scale and units with recessed safetybanana jack inputs

Model L410 0 to 100mVdc

Model L430 0 to 10Vdc

Electrical loggers — available in standard and plug-inAC voltage models and AC current models

Clamp-On Current Loggers— available with split jaw orflexible sensor

Clamp-On AC LoggerTrue RMS measurementwith split jaw opening(1.65")

Model CL6000 to 600Arms

Flexible Current ProbeLoggersFit around hard-to-reachor oversized conductors.Perfect for continuous- monitoring applications,with six-month recordingcapability on a single bat-tery. Compact loggingmodule mounts via Velcro®

pads. Available in fourmodels, each with 24" or36" AmpFlex™ sensor.

Models AL24-2500 &AL36-25005 to 250 or 500Arms

Models AL24-5000 & AL36-50005 to 500 or 5000Arms

Model L320

Model L100

Model L220

Model CL600

Model AL36-2500

Each unit includes: 9V Alkaline battery, win-dows based graphing and analysis software(CD-ROM), 6 ft DB9 RS-232 serial cable, anduser manual.

NIST it


C

Reco

rder

s / D

ata

Acqu

isitio

n

338

Multi-Parameter Dataloggers

DLT — Temperature DataloggerAmbient Operating Temperature -40°F to + 150°F (-40°C to + 65°C)Resolution 0.1°F (0.2°C)Accuracy +/- 2°F (1°C)Capacity 10,000 Data SamplesPower 3.6 Volt Lithium Battery (Supplied)Battery Life 3 year (Average Use)

DLTT — Dual Temperature DataloggerAmbient Operating Temperature + 10°F to + 140°F (-12°C to + 60°C)Ambient Operating Temperature -40°F to + 170°F (-40°C to + 76°C)(Sensors)Remote Temperature Precision sensor with 6’ long Probe

(DLTP6) cable and 4” stainless steelsubmersible tip, interchangeable

Accuracy +/- 2°F (1°C)Resolution 0.1°F (0.2°C)Capacity 8,000 Data SamplesPower 9 Volt Alkaline Battery (Not Included)Battery Life 1 year (Average Use)

DLTH — Temperature Humidity DataloggerAmbient Operating Temperature + 32°F to + 140°F (0°C to + 60°C)Relative Humidity Range 0 to 100%Relative Humidity Accuracy +/-2% from 0-95% RHRelative Humidity Resolution 0.1%Temperature Accuracy +/-2°F (1°C)Temperature Resolution 0.1°F (0.2°C)Capacity 8,000 Data SamplesPower 9 Volt Alkaline Battery (Not Included)Battery Life 1 year (Average Use)

DL420 — 4-20mA DataloggerAmbient Operating + 10°F to + 150°F (-12°C to + 65°C)Temperature RangeCurrent Resolution 0.01maCurrent Accuracy 0.05maMeasurement Capacity 16,000 Data PointsPower 9 Volt Alkaline Battery (not included)Battery Life 1 year (Average Use)

DLAC — AC Current DataloggerAmbient Operating + 10°F to + 150°F (-12°C to + 65°C)Temperature RangeCurrent Range 0 to 300 Amps AC using supplied clamp-on probeCurrent Resolution 0.1 Amp ACCurrent Accuracy +/- 5%Memory Capacity 16,000 Data SamplesPower 9 Volt Alkaline Battery (Not Included)Battery Life 1 year (Average Use)

DLAV — Voltage DataloggerAmbient Operating + 10°F to + 150°F (-12°C to + 65°C)Temperature RangeVoltage Range 0 to 500 VACVoltage Resolution 0.1 VACVoltage Accuracy +/- 1 VACMemory Capacity 16,000 Data SamplesPower 9 Volt Alkaline Battery (Not Included)Battery Life 1 year (Average Use)

DLP — Pressure DataloggerAmbient Operating + 32°F to + 130°F (0°C to + 35°C)Temperature RangePressure Range 0 to 500 PSIPressure Resolution 0.15 PSIPressure Accuracy +/- 3 PSIMemory Capacity 16,000 Data SamplesPower 9 Volt Alkaline Battery (Not Included)Battery Life 1 year (Average Use)

Event DataloggersDLEV Range 24 VAC to 270 VAC (50/60 Hz.) 24 VDC to

180VDCDLEC Range Dry Contacts from 0 to 10 OhmsDLEL Range Illumination Threshold Range: 18 LUX to

1900 LUX +/-20%DLES Range Sound Threshold Range: 40 db to 114 db @

1Khz. +/-20%Ambient Operating + 10°F to + 140°F (-12°C to 60°C)Temperature RangeMeasurement Capacity 8,000 Event SamplesPower 9 Volt Alkaline Battery (Not Included)Battery Life 1 year (Average Use)

Parameters• Single Temperature• Dual Temperature• AC Voltage• AC Current• 4-20 mA

• Pressure• Event Contact• Event Voltage• Event Sound• Event Light

Save 50%on 2nd year

recalibration

Ask about2 YearNIST



C

NIST it

Catalog No. Model Description PriceSU001 DLT Temperature Datalogger $89.70SU002 DLTH Temperature & Humidity Datalogger 119.00SU003 DLTT Dual Temperature Datalogger 149.00SU004 DL420 4-20mA Datalogger 89.00SU005 DLAC Current Datalogger 89.00SU006 DLEC Event Voltage Datalogger 89.00SU007 DLP Pressure Datalogger 139.00SU008 DLEV Event Voltage Datalogger 89.00SU009 DLES Event Sound Datalogger 89.00SU010 DLEL Event Light Datalogger 89.00SU014 DLAV Voltage Datalogger 89.00AccessoriesSU011 DP3 Data Plotter (optional) 299.00SU012 DLS Win 95 and 98 Compatible Software with interface cable 44.00SU013 DST DataStor 159.00NISTRC1 — NIST Traceable Certificate 125.00NISTRC2 — NIST Traceable Certificate with Data 199.00

• All loggers can be individuallycalibrated in the field

• PC software compatible withWindows 95, 95, 2000 & NT

• Selectable recording intervals• Start and stop recordings in the

field

• Unique locking feature preventstampering

• LED indicator shows operation• Retrieve data with PC or

DataStor (DST)• External probes supplied with

certain loggers


C

Reco

rder

s / D

ata

Acqu

isitio

n

340

Measure and record a variety of measurement parameters in a single session.

General Purpose Dataloggers

• 24 bit A/D converter• Proflash™ upgradeable

firmware• MAS™ Windows® based

software• CE compliant• 3 Year Warranty• 4.3"x 2.3" (100 mm x 60 mm)

LCD screen• RS232 Interface with cable• 128 Kilobyte non volatile memo-

ry (approx 100,000 samples)

• Drop-down menu navigation• Constant background monitoring• Sleep mode for extended

recordings• User adjustable span/offset

settings• Event/Time-based triggered

recordings• Folder-based file management• Long-life Nicad battery pack

SPECIFICATIONSModel T6V4RangeT Type Thermocouple -418 to + 743°F (-250 to + 395°C)E Type Thermocouple -418 to + 1823°F (250 to + 995°C)J Type Thermocouple -346 to + 2183°F (-210 to + 1195°C)K Type Thermocouple -418 to + 2498°F (-250 to + 1370°C)Voltage ± 5VDC and + 30VDC (user-selectable)Common Mode Range ± 30VDC (voltage channels only)Resolution Temperature Above -148°F (-100°C): 0.1°F or °C At or below -148°F (-100°C): 1°F or °CResolution Voltage ± 5VDC: 200µV (0.0002V) ± 30VDC: 1mV (0.001V)Accuracy Temperature Above -148°F (-100°C): ± 0.1% of reading ± 0.9°F (0.5°C) At or below -148°F (-100°C): ± 1% of reading ± 0.9°F (0.5°C)Accuracy Voltage ± 5VDC: ± 0.3% of reading ± 0.6mV ± 30VDC: ± 0.3% of reading ± 3mVCommon Mode Error 0.1% of common mode voltageMinimum Sampling Interval Number of channels selected Temperature or temperature and Voltage channels only

(user-selectable) voltage channels selected (seconds) selected (seconds)1 0.2 0.22 0.3 0.33 0.5 0.44 0.6 0.55 0.76 0.8

SPECIFICATIONSData Storage Format Up to 50 named data sets, Up to 50 recordings per data set, Up to 9,999 samples per recordingData Storage 128 kilobytes - approximately 100,000 individual samplesData Set Name Up to 16 alphanumeric charactersDisplay LCD with graphic capabilitiesSoftware Allows internal firmware to be upgraded via built-in serial portCommunications RS232Baud rate 9600, 19200, 57600 bits per secondT6V4 Any combination of up to 6 channels for any recordingTemperature Sockets accept miniature thermocouple twin blade plugVoltage Screw terminalsInput Impedance Temperature Channels 1, 2, 3 & 4: greater than 100k Ohms Channels 5 & 6: 30k OhmsInput ImpedanceVoltage Channels 7, 8, 9 & 0: 2M OhmsIsolation 50VDC minimumBattery Type Custom Nickel-Cadmium packOperating Time 13 hours nominal with backlight off

7 hours nominal with backlight onCharger & Conditioner Built-in dual rate charger-automatic and manual controlSize 9.7" W x 6.1" L x 3.0" H (247 mm x 154 mm x 75 mm) Weight: 4.4 lb (2 kg)Temperature/Humidity Operating: 32°F to 122°F (0°C to 50°C)/80% RH 32°F to 86°F

70% RH 32°F to 122°F



C

SPECIFICATIONSModel GP4Nominal current range 4 to 20mAMaximum current range 3.2 to 24mACurrent Resolution 2µA (1 part in 2,000 @ 4mA, 1 part in 10,000 @ 20mA)Current Accuracy ± 0.1% of reading ± 5µAMinimum Sampling Interval Number of Channels selected (user-selectable) Minimum sampling time (seconds)

1 0.22 0.33 0.54 0.6

Data Storage Format Up to 50 named foldersMultiple files per foldersUp to 59,999 data points per file

Data Storage 512 kilobytes - approximately 400,000 individual samplesFile/Folder Name Up to 16 alphanumeric charactersDisplay LCD with graphic capabilitiesSoftware via built-in serial portCommunications RS232Baud Rate 9600, 19200, 57600 bits per secondInput Termination Screw terminals, 5 mm pitch, 2.5mm2 wire sizeLoop Burden Maximum 6 volts at 20mA loop currentIsolation Optically isolatedBattery Type Custom Nickel-Cadmium packOperating Time 13 hours nominal with backlight off, 7 hours nominal with backlight onCharger & Conditioner Builit-in dual rate charger - automatic and manual controlTemperature/HumidityOperating 32°F to 122°F (0°C to 50°C)/80% RH 32°F to 86°F

70% RH 32°F to 122°FEMC EN50081-1

EN50082-1Size 9.7” W x 6.1” L x 3.0” H (247 mm W x 154 mm L x 75 mm H)Weight 4.4 lb (2 kg)

Catalog No. Model Description PriceCM300064 T6V4 Temperature & DC Voltage Datalogger $995.00CM30004 GP4 General Purpose Dataloggers 995.00Includes PC analytical software, manual, plug pack, download cable and protective outer boot.NISTDL01 — NIST Traceable Certificate 200.00NISTDL02 — NIST Traceable Certificate with Data 250.00

NIST it

Model T6V4 features directthermocouple hook-up

Save 50%on 2nd year

recalibration

Ask about2 YearNIST

Portable Datalogging and Alarming System


C

Reco

rder

s / D

ata

Acqu

isitio

n

342

• Two models to choose from: ModuLogger™ for expandableI/O requirements and MINI for 4 channel applications

• Expandable to 44+ analog inputs• Up to 48+ digital inputs/Alarm outputs• Modular design for easy expansion and OEM applications• Utilizes revolutionary HyperWare™ software for graphic

programming, communications, data plotting, real-timetrending and more

• Modem option with Pager Alarm Output• Low Power; battery or line powered• 13 bit ADC or 18 bit with isolated module• Full differential, bipolar inputs with 5 uV Resolution• Real-Time trending to a PC via modem or RS-232 serial link• Download data via RS-232, Cellular phone, RF Modem or

EtherNet

The Modulogger™ is a modular, self-con-tained data logging and alarming system de-signed for field, production floor and lab datacollection. As a self-contained, battery or line-powered, stand-alone unit, the Moduloggercan be deployed for reliable data collection ofdigital and analog inputs, storing them to in-ternal or PCMCIA memory. Easily pro-grammed with HyperWare™, the ModuloggerSeries has extremely powerful processing ca-pabilities for data reduction (averaging,min/max, etc) mathematical manipulation (al-gebraic, trig, time integrals, etc), as well asunlimited, User-programmable, intelligentdata logging capabilities.

The ModuLogger consists of a User-speci-fied stack of ruggedly packaged, plug-together,interface modules. Increasing the functionali-ty of the ModuLogger is easily accomplishedwith communication options, additional ana-log or digital inputs (ModuLogger only), LCDdisplay and memory expansion modules tomeet your specific application, or build a fullycustomized system based on the ML-300 sys-tem integration product.

The ModuLogger CPU base module containsthe system microprocessor, data storage mem-ory, 13 bit Analog to Digital converter, basicUser switches and indicators, RS-232 port,and Cold Junction Compensation circuitry. Italso includes four alarm outputs (2 relays,TTL and 5V software controllable), four uni-versal analog inputs, and one digitalcount/event input. The analog inputs are soft-

ware configurable for 6 thermocouple types,15 ranges of DC voltage or 7 ranges of DC cur-rent (specifications are identical to MLIM-1).Each analog input offers full differential in-puts, software programmable configuration,front-end completion circuitry and ruggedsuppression protection circuitry to insure reli-able accurate readings.

The ModuLogger is easily expandable froma family of plug-on modules. Choose from ad-ditional analog inputs (isolated or non-isolat-ed), digital I/O, modem communication, PCM-CIA memory card interface, Userinterface/display, battery power and integrat-ed sensor power supply. As modules are added,they stack onto the CPU base module, build-ing a layered instrument to meet your needs.Modules are self-identifying and configurablevia the HyperWare software for input type andrange within the module’s capability.ModuLogger allows for up to 5 added I/O mod-ules. The ModuLogger is ordered by individualline items so it is recommended to consultDavis technical sales for assistance with speci-fying ModuLogger components.

The ML-300 system can house either theModuLogger or the ModuLogger MINI and ad-ditional interface modules or ancillary optionsfor a complete data logging solution. Availableoptions include rechargeable Gel-Cell batter-ies, cellular telephone or RF communications,regulated power supply for sensor excitation,Photovoltaic charging, and an EtherNet connection.

Save 50%on 2nd year

recalibration

Ask about2 YearNIST



C

SPECIFICATIONS

NIST it

Catalog No. Model Description PriceLB02082000 MNL-1 Modulogger MINI unit complete with HyperWare software, RS-232 cable, dB-9 and DB-25 RS-232 adapters, $995.00

120VAC/12VDC wall power adapter and manual. I/O is not expandableLB02082008 ML-CPU ModuLogger CPU with 15K sample memory, 2 relay outputs, 1 TTL output, 5 VDC output, RS-232 port, 1,580.00

4 analog inputs, CJC & GPDI InputAccessoriesLB02082031 Option ML-EXM Factory installed option expands internal ModuLogger memory to 80,000 readings 150.00LB02082032 ML-TOP Top Cover Plate 12.00LB02082017 ML-DISP Display Module with LCD & User Switches 180.00LB02082016 ML-BACK Bottom Cover Plate/Wall Mounting Bracket 24.00LB02082033 COMBO-PAK-1 Includes: CAR-4, RJDB-9H, RJDG-25H, DCXF, and MDL-MAN (with HyperWare™ software) 260.00LB02082019 ML-BATT Battery pack module (with 6 D-cells) and ML-BACK 65.00LB02082034 MLBATT-PSM2 Same as ML-BATT battery pack but also includes a software controllable 5, 10, 15 and 24 Vdc power 210.00

supply for sensor and/or 4-20 mA loop excitationLB02082035 MLPSM-2 Sensor Excitation Power Supply module (5, 10, 15 and 24 VDC Output... field programmable, apx 100 mA) 142.00LB02082010 MLIM-1 Analog Interface Module; 4 chan of Thermocouple, DC Voltage and/or DC Current input 320.00LB02082011 MLIM-2 Digital Interface Module; 4 chan of Frequency, Event, and/or Count input plus 4 digital outputs 320.00LB02082012 MLIM-4 Resistance Interface Module; 4 chan of RTD, Thermistor and/or Resistance input 320.00LB02082014 MLIM-5 PCMCIA Interface Module; includes socket for SRAM memory cards 120.00LB02082015 MLIM-5-144 Modem/PCMCIA Interface Module; includes 14400B modem and socket for SRAM memory cards 340.00LB02082036 MLIM-7 Analog Interface Module; 8 channels total, 4 pairs of isolated chan of Thermocouple or 8 channels in 4 pairs 520.00

of 2, DC Voltage and/or DC Current inputLB02082013 MLIM-8 Digital Interface Module; 8 chan configurable as input or outputs 260.00LB02082037 ML-300 System Integration package for Mini and ModuLogger Dataloggers. Weatherproof hinged-door enclosure 240.00

with slide out rack for logger.LB02082038 SRB-1 Battery, sealed gel-cell. Single battery 12 VDC/12 Ah. 2 may be ordered 75.00LB02082039 PSM-2 Sensor Excitation/Loop Power Supply. Door mounted module steps up logger battery voltage for 2-20mA- 160.00

loop power and other sensor excitation rqmnts. Field pgmble output voltages, 5, 10, 15 and 24Vdc. For HyperLogger or ML-300

NISTDL01 — NIST Traceable Certificate 200.00NISTDL02 — NIST Traceable Certificate with Data 250.00

Data Storage Memory Redundant battery backed up SRAM. Apx 15,000 samples internal, up to 80,000 samples with expanded memory optionA/D Converter 12 bit plus sign (13 bit) SAR converter. Programmable first-order filtering and 50/60 Hz noise rejection optionsA/D Converter Accuracy +/-0.1% RDG + 1 bitSampling Throughput Rate 150+ Samples per Second (analog input to memory); rate is dependent on number and type of channels and programmed signal

processing. Sampling rates are configurable for each channelAnalog Input Channels 4 individually programmable channels of the following analog signal input. Any combination of the following types/ranges can be

configured in a Modulogger.Thermocouple Type J, K, E, T, R, SAccuracy +/-0.2 to 1.0C depending on range and type (+/- 5C for R and S type)Cold Junction Compensation -10 to 60C(CJC) RangeCJC Accuracy +/-0.5CDC VoltageFull Scale Ranges +/-20 mV, +/-40 mV, +/-50 mV, +/-70 mV, +/-100 mV, +/-200 mV, +/-1V, +/-2 V, +/-5 V, +/-10 V, +/-30 VAccuracy +/-0.3% F.S.Common Mode Range 3.5 VDC, Full Differential InputInput Resistance >2.5 M for 5, 10 and 30 VDC; >10M for all other rangesDC CurrentFull Scale Ranges +/-400 uA, +/-1.2 mA, +/-2.5 mA, +/-11 mA, +/-22 mAAccuracy +/-0.3% of RdgInput Resistance 100 ohms (all current ranges)Digital Input One General Purpose Digital Input Channel. User programmable for Event or high-speed Counter applications. Contact closure

or TTL driven signal input (15VDC max)Outputs2 Low-voltage relays; 500 mA rated1 Current limited TTL digital outputs1 100 mA 5VDC regulated outputExternal power Terminal strip connection for external power source. Accepts 9-32 VDC, 10-26 VAC from any semi-regulated external source

(120 VAC wall adapter is included with Modulogger). Fuse and Transzorb protectedOperating Temp/Humidity -10 to 60C (14 to 140 F) 90% non-condensing Contact factory for extended temperature applicationsEnclosure/Dimensions/Weight Dust Sealed. 8.8” W x 4.8” H x 2.2” H (3.8” H with Battery pack attached) 1.5 lbs (3 lbs with battery pack)


C

Reco

rder

s / D

ata

Acqu

isitio

n

344

Smart Reader Plus Dataloggers

SPECIFICATIONSSize 107 x 74 x 22 mm (4.2" x 2.9" x 0.9")Weight 110 grams (3.75 ounces)Case Material Noryl® PlasticOperating Limits -45°C to 70°C (-50°F to 160°F) and 0

to 95% Relative Humidity (non-condensing)

Clock Accuracy ± 2 seconds per day plus one sampling interval

Battery 3.6-volt Lithium, 1 Amp-HourMemory Size 32KB-21,500 readings; 128KB-87,000 readingsSampling Methods 1. Continuous (First-in, First-out) Not available

for sample rates faster than 8 seconds2. Stop when full (Fill-then-stop)

Sampling Rates User selectable rates from 25 per second to every 8 hours (BP-100 battery pack required for sample rates less than 8 seconds See Accessories Catalog for details

Resolution 12 bit (1 part in 4096)Power Consumption 5 to 10 microamps (continuous)Battery Life Ten years (Factory replaceable)PC Hardware Requirements IBM PC or 100% compatible with at

least one free serial portSoftware Requirements TrendReader® for Windows-Windows

version 3.1, 95 or NT already running with at least 2 MB of RAM memory and 2 MB of hard disk space

External Connector Removable screw-type terminal strip with Common (-) connection

Internal Temperature Sensor (common on all models,except model 9)Type Negative Temperature Coefficient

Thermistor10,000 ohms @ 25°C(77°F)Tolerance (sensor only) ± 0.2°C, over the range of 0 to 70°C (±

0.3°F, over the range of 32 to 158°F)Range -40 to 70°C (-40 to 158F)Resolution 0.03°C (0.05°F) at 25°C (77°F)

Better than 0.07°C (0.12°F) between -25°C (-13°F) and 70°C (158°F)Better than 0.13°C (0.23°F) between -40°C (-40°F) and -25°C (-13°F)

SRP1 Temperature Two channels (one for internal temp. sensor and one for remote temp. sensing or switch status or resistance)

SRP2 Relative Humidity Four channels (one for internal temp. sensor, one for RH sensor and two remaining for optional remote sensing of temp, RH or resistance)

SRP3 3 Phase Current Four channels (one for ambient temp, and three external for use with Amprobe clamp-on current probes)

SRP5 2 Channel Three channels (one for internal thermistor for cold-Thermocouple junction compensation and two thermocouple inputs

for types J, K, S or T)SRP6 7 Channel Eight channels (one for internal thermistor for

Thermocouple cold-junction compensation and seven thermocouple inputs for types J, K, S or T) 0-10VDC or 0-25mADC

SRP7 Process Signal Eight channels (one for internal thermistor and seven analog inputs) 4-20 mA or 0-1VDC

Stores up to 87,000 — 12 Bit Readings

Software Features • Presentation quality graphs• One-Touch table view

• Fast and easy logger setup• Exports data to spreadsheets

NIST it

Memory Size 128KB

Cat. No. Model Description PriceAR97001 SRP1 Temperature Logger $469.00AR97002 SRP2 Temperature & Relative 869.00

Humidity LoggerAR97003 SRP3 Electrical Current and 759.00

Temperature LoggerAR97055 SRP4 0-100psia Pressure, 899.00

Temperature and RH Logger

AR97005 SRP5 Thermocouple Logger 849.00AR97006 SRP6 Multi-Channel 979.00

Thermocouple LoggerAR97007 SRP7 Process Signal Logger 949.00AR97008 SRP8 8-Channel Temperature Logger (128K) 889.00AR720091 SRP-009 2-Channel Pulse Logger (128K) 949.00AR97010 SRP-010 3-Channel RTD Temperature Logger (128K) 949.00AR100120 AM-100-120 Alarm Module for SRP Series 949.00NISTDL01 NIST Traceable Certificate 200.00NISTDL02 NIST Traceable Certificate with Data 250.00

Software, Probes and AccessoriesAR72020 TRS TrendReader® Software for Windows 159.00AR10076 TBS-WIN Talk back Software Package 149.00

for automatic download of dataAR10073 RTM-WIN Reat time Graphing Software 99.00AR72021 EH-020A General purpose probe 227.00

temperature and RHAR72022 ET-016 General purpose 82.00

temperature probeAR72023 ET-004 Low temperature 160.00

penetration probeAR72024 ET-081 High temperature probe 82.00AR72025 ET-086 Oven temperature probe 82.00AR72031 A70FL Amprobe current probe, 143.00

10, 50, 250 and 500 AmpsNISTTP10 — NIST Traceable Certificate for probe only 50.00NISTTP11 — NIST Traceable Certificate with Data 85.00

for probe onlyPlease inquire for additional probes and sensors



C

Information Loggers

SPECIFICATIONS

Size 60 mm x 48 mm x 19 mm (2.4" x 1.9" x 0.7")Weight 65 g (2.3 oz.)Case Material Polyurethane or Nory / Plastic Operating Limits -40 to 85°C (-40 to 185°F); 0 to 100% RHClock Accuracy ± 2 seconds per day plus one sampling intervalBattery 3.6 volt Lithium, 10-year typicalMemory Size Variable up to 32,767 readingsSampling Methods First-in First-out, Fill-then-stop, Delayed start,

Trigger startSampling Rages User selectable rates from 5 per second to once

every 12 hoursResolution 8 bit (1 part in 256). Can be optimized to the

equivalent of 10 bit resolutionCommunication Optical Send/Receive from up to 1" between

logger and interface cable (with no obstructions)Alarm Type Optical (Red LED)External Connector Removable; IP 67 occasional submergence rating

(excluding the OWL model 100)PC Requirements IBM PC or 100% compatibleSoftware Requirements1. TrendReader® for Windows® -- Windows® version 3.1 or later alreadyrunning with at least 2 MB or RAM memory and 2 MB or hard disk space2. TrendReader® for DOS-MS DOS version 3.0 or later and at least 512 K ofRAM memory. TrendReader® for DOS supports a wide range of printers and plotters.Product ApprovalsMeets Part 15 for Digital Devices of the Code of Federal Regulations of theFederal Communications Commission (FCC). Meets Class A radiated andconducted emission requirements of Section 2 of the Radio InterferenceRegulations of Communications Canada. IEC801-2, 3, 4 and EN55011covering ESD, RFI Immunity, EFT/Burst and Radiated Emissions respectivelyfor the Commission of the European Communities (CE)Interface Cable SpecificationsPC Connector Female DB 9 pin connector

Logger Connector Anodized Aluminum optical connecting tubeCable length 1.8 meters (6 feet)Internal Temperature ModelThermistor Type NTC Thermistor (10K ohms @ 25°C)Operating Range -40 to 85°C (-40 to 185°F); 0 to 100% RHTotal Accuracy ± 0.5°C (0.9°F @ 77°F). Can be increased by

using narrow range featureStandard Resolution 0.5°C (0.9°F) at 25°C (77°F). Better than 1°C

(1.8°F) between -25°C (77°F) and 70°C (158 °F). Better than 2.0°C (3.6°F) between -40°C (-40°F) and -25°C (-13°F)Can be increased by using narrow range feature

Submergence Rating 100 m (328') in fresh waterExternal Temperature ModelThermistor type NTC (10K ohms)Logging Accuracy ± 1% of range, probe requiredAC Current Model 300Frequency Ranges 60 Hz - A60FL and A70FL current probes

50 Hz - A65FL and A75FL current probesCurrent Ranges With OWL A60FL and A65FL

current probes 5, 25, 100, 250 AmpsWith OWL A70FL and A75FL current probes0, 50, 250 and 500 Amps

Accuracy ± 3% F.S. above 10% range, Probe requiredDC Voltage Model 400Input Range 0 to 38.4 volts max. DC

(software selectable ranges available)Input Impedance Greater than 100 K ohmsAccuracy ± 1% of full scaleDC Current Process Model 500Input Range 0 to 24 mA max. DCInput Impedance 100 ohmsAccuracy ± 1% of full scale

NIST it

Small, Reliable, Tough And Water Resistant

Catalog No. Model Description PriceAR72110 OWL-100 Info Logger, Internal Temperature $399.00AR72111 OWL-200 Info Logger, External Temperature 299.00

(probe required)AR72112 OWL-300 Info Logger, AC Current 299.00

(probe required)AR72113 OWL-400 Info Logger, DC Voltage 299.00AR72114 OWL-500 Info Logger, DC Current 299.00AR72121 OWL-100 Info Logger, Internal Temperature, 299.00

Plastic noryl plastic case

AccessoriesAR72115 01-0070 TrendReader® Software for Windows 169.00AR72117 01-0023 Computer interface cable 102.00

9 Pin with 25 to 9 pin adapterAR72118 01-0004 General purpose temperature probe 110.00

-30 to 200 °F for Model 200AR72120 01-0001 AC Current clamp 500 Amp 171.00

60 Hz for Model 300NISTDL30 — NIST Traceable Certificate 125.00NISTDL31 — NIST Traceable Certificate with Data 199.00

Presentation Quality GraphsTrendReader® allows you to present logged data the way you want. Multiple logged data sets can be displayed and

compounded to create new graphs. For added presentation power, TrendReader® lets you add comments, change graphcolors, zoom in on specific portions of data, display your data using custom engineering units and print to anyWindows compatible printer with ease. TrendReader® even lets you copy/paste your graphs directly into your case re-ports. If you prefer to use Excel®, Lotus® or other popular spreadsheet programs, data can be exported into severalASCII formats.


C

Reco

rder

s / D

ata

Acqu

isitio

n

346

Agilent Datalogger/Data Acquisition System

Measurements You Can TrustWith the 34970A, you get the benefit of proven performance,

universal inputs with built-in signal conditioning, and modularflexibility—in a compact data-acquisition package. Whetheryou need to measure temperature, AC/DC volts, resistance, fre-quency or current, the 34970A can handle it. The internal au-toranging DMM eliminates the need for expensive external sig-nal conditioning. This unique design allows complete per-chan-nel configurability for maximum flexibility and quick, easy setup. Three module slots and eight switch/control modules allowyou to customize the 34970A to meet your specific require-ments. Free Software Saves You Time and Money

BenchLink Datalogger software gives you a familiarWindows® interface for test configuration and real-time datadisplay and analysis. Even better, this full-featured data log-ging application is included free with every standard 34970A.Datalogger/Data Acquisition System In One

In the past, you had to choose between the simple operationand low cost of a Datalogger or the flexibility and higher perfor-mance of a modular data acquisition system. The 34970A givesyou the best of both: a simple user interface with low per-chan-nel cost, modular construction and impressive measurementperformance.Log Up To 120 Channels

Configured with a 20-channel relay multiplexer, the 34970Ais a powerful, low-cost datalogger that’s quick to set up andeasy to run. It’s perfect for a multitude of data logging andmonitoring applications, either stand-alone or with a computer.Its modular design makes it scaleable from 20 to 120 channels,and lets you add actuator, digital I/O and analog output chan-nels for simple control.Its rugged features make it perfect forportable applications, and its small footprint makes it ideal forcramped benchtop testing. Standard HP-IB (IEEE 488) andRS-232 interfaces let you program the instrument for automated tests.

The 34970A measures and converts 11 different input sig-nals: temperature with thermocouples, RTDs, and thermistors;DC/AC volts; 2- and 4-wire resistance; frequency and period;DC/AC current.

Alarms are available on a per-channel basis as well. Enter ahigh limit, a low limit, or both. You can assign one of four TTLalarm outputs to any input channel to trigger external alarmlights, sirens, or send a TTL pulse to your control system, with-out a PC connected.

A special display mode monitors a selected input channel,continuously updating the display with new readings—evenduring a scan. It’s great for checking a key input, or for trou-bleshooting your system before a test.

All readings are automatically time-stamped and stored in anon-volatile 50,000-reading memory, enough to hold more thana week’s worth of data. The memory holds your data even after

power is removed, so you can use the 34970A to collect data at aremote location for later uploading to a PC. And because sys-tem configuration is stored in memory, if you lose power in themiddle of a test, the unit resumes scanning when power isreturned.

The internal 6 1⁄2 -digit DMM adds the performance of aworld-class, stand-alone DMM to the 34970A, but at a fractionof the cost and in a fraction of the space. It’s as accurate as thebest bench DMM available: 0.004% basic DCV accuracy, 0.06%basic accuracy, and 0.01% basic resistance accuracy. Patentedtechnology offers outstanding linearity along with 22 bits ofreal resolution. And since it is an integrating A/D, it providesexcellent noise rejection as well. If you need high scan rates,the 34970A is capable of delivering fully converted measure-ments directly to HP-IB to RS-232 at speeds of up to 250 ch/s.The input section of the DMM is optically isolated and shieldedfrom the 34970A’s earth-referenced circuitry and computer in-terface, offering up to 300V or input isolation.

The internal DMM lets you measure 11 types of inputs easi-ly and inexpensively. Built-in signal conditioning and conver-sion routines turn raw inputs directly into real information.

NIST it

• Scan rates up to 250 channels/sec.• 61⁄2 digit resolution (22 bit)• ± 0.004% basic DC accuracy• Modular construction offers flexibility• Accepts 11 different input signal types

Catalog No. Model Description PriceHP34970A 34970A Datalogger/Data Acquisition Unit $1,290.00HP34901A 34901A 20-Channel Armature Multiplexer 395.00HP34902A 34902A 16-Channel Reed Multiplexer 395.00HP34903A 34903A 20-Channel Actuator/General 295.00

Purpose SwitchHP34905A 34905A Dual 4-Channel RF Multiplexer, 495.00

50Ω (includes adapter cables)HP34907A 34907A Multifunction Module 295.00HP34908A 34908A 40-Channel Single-Ended Multiplexer 395.00HP34161A 34161A Accessory Pouch 40.00HP34131A 34131A Hand Carrying Case 203.00NISTDL01 — NIST Traceable Certificate 200.00NISTDL02 — NIST Traceable Certificate with Data 250.00

Measures and converts 11 different input signals: temperature with thermocouples,RTDs, and thermistors; DC/AC volts; 2- and 4-wire resistance; frequency and period;DC/AC current



C

Analog/Digital Datalogger

Catalog No. Model Description PriceVKL128 AD128 Analog / Digital Datalogger $799.00NISTL01 — NIST Traceable Certificate 200.00NISTL02 — NIST Traceable Certificate with Data 250.00

• RS-232 interface• Lightweight, pocket-sized• Stand-alone--high capacity memory• Fast, easy setup--no programming• Operates from standard 9V battery or

included AC adapter• 10-year battery backup

SPECIFICATIONSSampling Channels 8 analog, 16 digitalAnalog InputsRange 0 to 5 VResolution 20 mVInput Bias 400 nADigital InputsHigh Threshold 3.5 VLow Threshold 1.0 VInput Bias ± 10 µASampling Intervals 0.1 seconds to 99 minutesData Storage 130,000 samples

The pocket-sized Model AD128 records up to 8analog and 16 digital input signals, simultaneous-ly, as fast as 100 samples per second. The super-reliable software interlock and 10-yearbackup battery facilitate worry-free data collec-tion and protection from loss of data. The recentlyreleased Version 3.0 software makes reviewingdata a snap--a single mouse click generates a pre-formatted graph with scroll and zoom functions.High quality graphs can be copied to other pro-grams or printed directly.

NIST it

Catalog No. Model Description PriceTG100 SW12W WinWedge v1.2 $199.00TG102 SW3032P WinWedge 32 Pro v3.0 495.00Bar Code SoftwareTG218 BC30W B-Coder DTP v3.0 199.00TG219 BW30WP B-Coder Pro v3.0 395.00

WinWedge v1.2 (Standard Edition)• Designed to work with simple devices such as bar code readers, elec-

tronic scales, calipers and gages, or any other device that transmitssimple text data

• Supports basic prompting and control of serial devices• Selectable input buffer size (up to 32K) • Baud rates up to 19,200 baud• WinWedge Standard fully supports Dynamic Data Exchange (DDE)

WinWedge 32 Pro• 32 bit version of WinWedge Pro for Windows 95 and NT• All the powerful benefits of WinWedge Pro plus support for up to 100

serial ports simultaneously and faster processing• WinWedge 22 Pro also comes with a free TCP Wedge program for

communication with an IP address on a network or the internetNote: The 32 bit version will only run on Windows 95 or NT.

The 16 bit versions are compatible with Windows3X, Windows 95 and NT

SoftwareWedge products are fully customizableserial I/O device drivers that input real-time datafrom instruments directly into spreadsheets, data-bases, statistical packages, LIMS, HMIs and otherapplications. They eliminate the need for errorprone manual data entry or difficult custom programming for data collection from your serialdevices.

Serial Instrument Direct to PC Software

Save 50%on 2nd year

recalibration

Ask about2 YearNIST


C

Reco

rder

s / D

ata

Acqu

isitio

n

348

Portable Datalogging SystemThe HyperLogger Datalogger meets all your remote site and plant floor datacollection and alarming needs.

SPECIFICATIONSParameterSampling Speed 150S/SecSample Capacity 40,000 std. 600,000 optional

with PCMCIA cardPower Battery or 10-16VDC ext

(3 wks logging on batteries)Interface Module Ports 6Thermocouples Accuracy(HLIM-1 module) J, K, E, T types 1.2°C (CJC

and curve)R, S types 5°C (CJC

and curve)VDC (HLIM-1 module) ± 20mV to ± 30VDC ± 0.3% fs

(11 ranges)ADC (HLIM-1 module) ± 200µA to ± 22mA ± 0.3% fsFrequency (HLIM-2 module) 5Hz-30kHz ± 5% + 1 countCount (HLIM-2 module) 0 count error

20KHz max inputRTD (100 or 1000 ohm) -200°C to 450°C range 0.4°C (HLIM-4) 0.5°C Resistance (HLIM-4) 0 to 400,000Ω (12 ranges) 0.5% fsAnalog Resolution 13 bitsHLIM-7 Fully isolated 18 bit, thermocouple, VDC, ADCEnclosure Lockable, weatherproof NEMA 4XSize 10.5" x 14" x 6.5"Weight 10 lbOperating Temperature -10°C to 60°C Warranty 1 year

• Expandable to 24 analog/48 digital inputs• 150 Analog samples per second• Multi-function interface modules for VDC, VAC,

thermocouples, RTD’s, resistance, digital and IsolatedAnalog inputs available

• 13 Bit ADC (12 bit-bipolar)• 5 Alarm outputs standard• Removable PCMCIA memory option• Battery or external power operation• Weatherproof enclosure standard• Modem, EtherNet, RF modem and cellular

communications methods• HyperWare software included for: communications,

icon-based programming, real-time trending, postprocessing and graphing

• Excel and ASCII file format output• Systems supplied complete with software, manual,

cables and batteries

Save 50%on 2nd year

recalibration

Ask about2 YearNIST



C

• Build HyperLogger programs visually via drag and drop icons• Programmable intelligent logging strategies• Unlimited programming flexibility• Zoomable graphic data display• BMP Plot outputs for other Windows applications• Full modem, RF Modem, EtherNet Support• Real-Time data display and tracking modes

Catalog No. Model Description PriceLB02081977 HL-1 HyperLogger System Base, including HyperWare for Windows, CJC Sensing Terminal Strip Adapter, $2,480.00

High Speed Digital Input, 5 Alarm Outputs, RS-232 Cable, DB9 & DB25 Adapters, Liquid Tite Fittings, Hanger, Instruction Manual, Power Pack Batteries

Plug-In Interface ModulesLB02081978 HLIM-1 Analog Input, 4 Channels (any mix) of Thermocouple (J, K, E, T, R, S), VDC, ± 30 VDC, 0-22 mA (bipolar ranges up to ± 25mA) 320.00LB02081979 HLIM-2 Multifunction Digital Input/Output, 4 Channels of Frequency Input, Counter Input or Digital Output (any mix) 380.00LB02081980 HLIM-4 Resistance Input , 4 Channels of RTD Thermistor, Resistance Input (any mix) 320.00LB020819811 HLIM-7 Analog Interface Module; 4 pairs of isolated channels of thermocouple, DC voltage and/or DC current input, 18 bit resolution 320.00LB02081981 HLIM-8 Digital Input/Output, 8 Channels Input/Output 320.00LB02081982 HLIM-5 PCMCIA & Modem Interface (supports both) 140.00AccessoriesLB02081983 MM-14.4 14.4K Baud Modem Module (requires HLIM-5) 220.00LB02081984 MC-200 PCMCIA Memory Card (ap x 200,000-300,000 samples) 260.00LB02081985 PD-1 PCMCIA Drive (connects to PC for reading of PCMCIA memory cards at PC location) 280.00LB020819861 PSM-2 Door mounted regulated sensor power supply 160.00NISTDL01 — NIST Traceable Certificate 200.00NISTDL02 — NIST Traceable Certificate with Data 250.00

HyperWare™ for Windows™ is simply pow-erful PC software providing everything need-ed for setup of the HyperLogger through col-lecting and plotting data. Use HyperWare forprogramming the HyperLogger, communicat-ing between the HyperLogger and the PC,graphic data display, and real-time tracking.With HyperWare™ for Windows, you are upand running immediately, benefiting fromthe standard Windows mouse and keyboardUser interface as well as printer and commu-nications equipment already installed foryour other Windows applications.

HyperWare™ for Windows includes:

Delta Logging – Log data only when sampled signals change by a pre-specified amount. Provides awesome memory conservation with a minimal loss of signal characterization.

Math Calculations – On-the-fly data reduction, inter-channel calculations, and engineering units conversion. Use our supplied library functions or add you own.

Thermocouple or Voltage –Versatile InterfaceModules are config-ured via software.For example, simply

click and a VDC input becomes aThermocouple input (including ColdJunction Compensation!)

LCD Message – Sends a message tothe HyperLogger display tolet on-site staff identify thecause for alarms.

Pager Alarming – Get paged whensomething runs amok. Hightemperatures, low pres-sures, memory full--anyalarm and you get a call.

Min, Max, and Average – For data reductionwhile log-ging. User-

defined sampling frequency and averaging interval.

A Sampling of Available Icons

HyperComm™ visual commu-nications via RS-232, modem orethernet. Re-program, check sta-tus, download data, and controlthe Logger all via serial link.

HyperNet™ intuitive, visualprogramming of theHyperLogger. Unlimited flexibili-ty with unparalleled simplicity--and no programming languagesrequired.

HyperPlot™ graphic data dis-play. Plot, analyze, print and ex-port to other Windows applica-tions.

HyperTrack™ real-time datadisplay. Monitor site data andperformance via modem, or usefor intelligent real-time data ac-quisition in the lab, all while theHyperLogger is logging data.

NIST it


C

Reco

rder

s / D

ata

Acqu

isitio

n

350

• 4 analog or digital input channels• Operates over standard telephone lines• Automatically calls up to 8 pre-programmed phone numbers• Call in for status report• Microphone to monitor local sounds• Digitally-recorded voice messages• Field programmable• Power failure alarm• Surge protection• Optional battery backup• Made in USA

SPECIFICATIONSUniversal Signal Inputs 4 input channels

Digital, open (5VDC)or closed(5mADC) contactsAnalog, 4-20 mA, single-ended

Autodialing Up to 8 different phone numbersLocal Alarm Relay Activated during unacknowledged alarmTelephone Connection RJ11 telephone line jackPower Requirements User supplied 10-14 VDC, 500 mA maxPower Consumption 200 mA minimum standby

500 mA maximum activePower Failure Automatic alarm for external power failure

(only if purchased with AC power and battery backup)Battery Backup 20 hours, optionalTemperature Range 20° to 130°FHumidity 0 to 95%, noncondensingWeight 4 lb., 6 lb. with optional batteryDimensions 6.85" H x 8.85"W x 2.85"DMounting Centers 3.6" H x 9" WEnclosure Durable steel cabinet, wall or flush mountingWarranty Two year parts and laborHandset User-furnished standard touch tone handset

required for programming

Catalog No. Model Description PriceRA100 GI-4 Guard-It Autodialer $795.00RA101 GAC AC Power Supply Option 50.00RA102 GBB Battery Backup Option 65.00RA103 GNEMA 4X NEMA 4X Enclosure 125.00

Analog or Digital InputsGUARD-IT monitors up to 4 input

channels, with each channel configurablefor an analog or digital signal input.

The system utilizes the public telephonenetwork for transmission of alarm messages and status calls.Automatic Alarm Reporting

Upon detection of an alarm condition,the system automatically calls a list of upto 8 pre-programmed phone numbers, calling each in turn until it gets an answer.When a connection is made, the system reports the station identity and the specificalarm condition in the form of a voice mes-sage, digitally pre-recorded by the user.

In addition to standard phones in office,plant, or home, the alarm calling sequencecan also include calls to pagers, cellularphones, and voice mail. The user can callthe system from any remote phone for astatus report of all points being monitored.AlarmAcknowledgement

An alarm is acknowl-edged simply by press-ing a button on thecalled phone. When ac-knowledging an alarm, abuilt-in microphone per-mits the caller to listenfor background soundsat the site. The user canalso call the system fromany remote phone for astatus report of allpoints being monitored.

Autodialer Monitoring System



C

The Cellularm System is designed to provide apermanent or temporary communications link foralarm autodialing if conventional telephone linesare disabled or not available, as well as providingsecurity and safety backup to regular phone service.

The System includes a GUARD-IT™ AlarmAutodialing and Remote Monitoring System andcellular transceiver in one compact package thatis easy to transport and install.

• Alarm monitoring and autodialing• Temporary or permanent field use• Security and safety backup to regular phone service• Easily transportable• Set-up in less than an hour• Convenient to move from job to job• Ruggedly built• Weather-resistant enclosure• Made in USA

SPECIFICATIONSUniversal Signal Inputs 4 input channels

Digital, open or closed contactsAnalog, 4-20 mA, single-ended

Autodialing Up to 8 different phone numbersLocal Alarm Relay Activated during unacknowledged alarmPower Output Transceiver: 3 wattsAntenna Mounted inside enclosurePower Requirements System: 120 VAC, 60 Hz; 12 to 14 VDCTemperature Range System: 20F to 130FWeight 50 lb. with cell phone, autodialer, batteries,

and enclosureDimensions 171⁄2" H x 151⁄2" W x 61⁄4" DEnclosure Fiberglass NEMA 4XWarranty 2 years parts and laborHandset User-furnished standard touch tone handset

required for programming autodialer

Cellular Phone Autodialer System

Catalog No. Model Description PriceRA110 GI-4CELLAC Autodialer/Cellularm System, AC powered $2,450.00RA112 BCELL HS Cellular phone programming handset 175.00Includes cellular transceiver, GUARD-IT Autodialer, 8-hour standby battery, inside antenna, and NEMA 4X enclosure. User must arrange for cellular servicewith a local provider. In a cellular fringe area, a higher strength antenna might be required (furnished by owner)


C

Reco

rder

s / D

ata

Acqu

isitio

n

352

4 Channel Sensor to Computer Interface Modules

Catalog No. Model Description PriceDG2045 D5131 Interface Module 0-5VDC Input with RS-232 $250.00DG2052 D5151 Interface Module 0-100VDC Input with RS-232 250.00DG2055 D5251 Interface Module 4-20mA input with RS-232 250.00DG2060 D5311 Interface Module Type J Input with RS-232 275.00DG2062 D5321 Interface Module Type K Input with RS-232 275.00DG2063 D5450 Interface Module Thermistor Input with RS-232 275.00NISTRC1 — NIST Traceable Certificate 125.00NISTRC2 — NIST Traceable Certificate with Data 159.00

SPECIFICATIONS

Converts Four Analog Input Signals to Engineering Units and Transmits in ASCII Format to any PC

Power

Requirements Unregulated + 10V to + 30VDC, 0.75W maxProtected against power supply reversalsEnvironmentalTemperature range Operating: -25°C to + 70°C

Storage: -25°C to + 85°CRelative Humidity 0 to 95% noncondensingD5131/D5151 Voltage InputsVoltages ± 100mV, ± 1V, ± 5V, ± 10V, ± 100VDCResolution 0.01% of FS (4 digits)Accuracy ± 0.02% of FS max.Zero drift ± 1 count max (autozero)Span tempco ± 50 ppm/°C max.Input burnout protection to 250VACInput impedance ≤± 1V input = 100MΩ min.

≥± 5V input = 1MΩ min.D5251 Current InputCurrent 4-20mADCResolution 0.04% of FSAccuracy 0.04% of FSZero drift ± 1 count max (autozero)

Span tempco ± 50 ppm/°C maxVoltage drop 1.0V maxD5311/5321 Thermocouple InputsThermocouple types J, K, T, E (factory set)Ranges J = 200°C to + 760°C T = -200°C to + 400°C

K = 150°C to + 1250°C E = -100°C to + 1000°CResolution ± 1°Overall Accuracy (error from all sources) from 0 to + 40°C ambient ± 1.0°CInput Impedance 100MΩ min.Lead resistance effect <20µV per 350ΩOpen thermocouple and overrange indicationInput burnout protection to 250VACUser selectable °C or °FAutomatic cold junction compensation and linearizationD5450 Thermistor InputsThermistor types 2252Ω at 25°CRange -0°C to + 100°CResolution 0.01°C or FAccuracy ± 0.1°CInput protection to 30VDCUser Selectable °C or °F

• Four analog input channels• Complete sensor to RS-485 or RS-232 interface• ASCII format command/response protocol• 500V RMS analog input isolation• 15 bit measurement resolution• Continuous self-calibration; no adjustments of any kind• Programmable digital filter• Requires + 10V to + 30VDC unregulated supply• Transient suppression on RS-485 communications lines• Screw terminal plug connectors supplied• Y2K compliant• CE markedAnalog• Four channel analog input• Maximum CMV, input to output at 60Hz: 500V RMS• Leakage I, input to output at 115Vrms, 60 Hz: <2µA rms• 15 bit measurement resolution• 8 conversions per second• Common mode rejection: 100dB at 50/60 Hz• Autozero & autocalibration-no adjustment potsDigital• 8-bit CMOS microcomputer• Digital scaling, linearization and calibration• Nonvolatile memory eliminates pots and switches• Small and large signal digital filtering with user selectable

time constants

NIST it

Save 50%on 2nd year

recalibration

Ask about2 YearNIST



C

SPECIFICATIONSFunction High speed, high level, 8 channel multiplexed

analog to digital converter with 16 digital I/Olines and 3 channel programmabletimer/counter

Bus Interface The 5500 is designed to plug directly into thePC ISA Bus

A/D InputsNumber of Inputs 8 single ended or pseudo-differential (jumper

selectable)Acquisition rate (Max.) 25 KHzA/D Full Scale Ranges ± 10 V, 0 to 10 V, ± 5 V, (jumper selectable)Linearity ± 1 LSBGain Error Adjustable to zeroGain Drift 30 ppm FSR/°CZero Error (offset) Adjustable to zeroZero Drift 15 ppm FSR/°CInput Impedance Shunt Res. to Ground 10 MΩShunt Capacitance 100 pf, Series Res: 1000ΩOvervoltage Protection Multiplexed Input ± 32 V powered ± 20 V not

powered Common Pseudo-Diff Return Line ± 15 V

Acceptable Operating Limit Multiplexed Input ± 10.5 V Common Pseudo-Diff Return Line -8 to + 11 V

Data Coding Unipolar Right Justified, true binary Bipolar Two’s compliment, or offset binary

Digital Inputs/OutputsNumber 16 lines, direction jumper selectable in

groups of fourInput Level TTL with 4.7 KΩ pull-up resistorRegister Two 8-bit registers. Lines configured as

inputs are unlatched read-only, while lines configured as outputs are latchedwrite and unlatched read

Maximum Output Current Low: 23 mA (sinking)High: 15 mA (sourcing)

Counter/TimerNumber/Size of Counters Three 16 bit countersType 8254Count Source Counter 0 (ADC trigger) 1.0227 MHz*Counter 1 Jumper selectable choice of 1.0227 MHz* or

externally provided clock sourceCounter 2 Externally provided clock sourceInput Frequency DC to 5 MHz, 60 nanosecond minimum pulse

widthInput Characteristics High + 2.4 V min., -5 V supply, + 0.3 V max.

Low -0.5 V min, + 0.8 V maxOutput Characteristics High + 3.0 V min @ -2.5 mA sourcing

Low 0.4 V max @ 2.5 mA sinkingA/D TriggerSource Counter 0 output, software, or external trig-

ger, jumper selectable, software enabledExternal Trigger Operation Triggers on falling edgeVoltage Range -0.5 V min., -5 V supply, + 0.5 V max.Characteristics 3.0 V minimum amplitude, 0.1 µsecond max.

fall time, 5 µsecond min. pulse widthPhysical & EnvironmentalSize 3.90" x 6.60" (9.91 cm x 15.24 cm)Connector Connector: 37-Pin standard “D” subminiature

socket brought to outside of PC. Mates with ITT/Cannon DC-37P series or equivalent

Cable (G40) 40 conductor flat ribbon, 37 pin “D” male at board end 3M 3417-6040 connector at user end

Screw Terminations 3.5" x 6.0" (8.89 cm x 15.24 cm) PC (TB5500) board with clamping terminals to accept 14-

22AWG wire. Terminal board mates with 3.75: x 6.25" x 2.0" (9.53 cm x 15.88 cm x 5.08 cm)protective enclosure

Temp. Range of Operation 0° C to 55° CPower Consumption + 5 V @ 0.6 A

+ 12 V @ 30 mA-12 V @ 50 mA

Catalog No. Model Description PriceAG5118 5500MF 8 analog inputs, 25 KHz max $195.00

throughput, 16 digital I/O, 3 channelcounter/timer, includes software

AG5119 G40-0 40 pin flat ribbon cable 40.00AG5120 TB5500 Terminal board with clamping screw 60.00

terminals for all functions on 5500MFNISTDL01 — NIST Traceable Certificate 200.00NISTDL02 — NIST Traceable Certificate with Data 250.00

The 5500MF is a low cost data acquisitionboard for the PC ISA Bus. The 5500MF has 8 highlevel (± 10 Volts) pseudo-differential analog inputsmultiplexed to a 12 bit A/D converter. Total hard-ware conversion time is approximately 40 mi-croseconds: maximum throughputs of 25 KHz canbe achieved when operating under program con-trol. The board also has 16 lines of TTL level digi-tal I/O with two 8 bit registers. In addition to theanalog and digital I/O, the 5500MF contains an8254 counter/timer chip which provides the boardwith three programmable timers, two of which canbe used as input counters. This counter/timer fea-ture allows the 5500MF to be used in pulse gener-ation, timing, and counting applications.

• 8 Analog Inputs • 12 Bit A/D Resolution• 25 KHz Max Throughput • 16 Lines of Digital I/O• Programmable Timers • CE Approved• Pulse and Frequency Measurements • Pulse Generator

High Speed Analog to Digital Converter NIST it


C

Reco

rder

s / D

ata

Acqu

isitio

n

354

The 4-20 mA Radio Link is truly state-of-the-art cable replacement technology. 4-20 mA RadioLinks allow direct communication between stan-dard 4-20 mA sensors and dataloggers or PLCs,without hardwired connections. Their range of upto 1 miles (1500m) makes them the perfect datatransmission tool for industrial and environmen-tal applications.

Using state-of-the-art spread spectrum technol-ogy, the 4-20RLs help to maximize your resources.They can reduce the number of data collection de-vices required at a site, can eliminate the cost oflaying cable, and can maximize flexibility in thedata collection process.

4-20 mA Transmitter and Receiver

Catalog No. Model Description PriceAC114210 101.420.100 4-20 Radio Link 2000 Transmitter $499.00AC114211 101.420.101 4-20 Radio Link 2000 Receiver 499.00Includes 12 VDC power cable, 8 wire signal cable & installation guideAntennasAC114215 901.000.269 Directional antennas are 895-980 MHz, 6 dBd, 4 element Yagi, N-Female 69.00

• Up to 1 miles (1500m) line-of-sight range• Approved for FCC License-free operation• User-selectable refresh intervals• Matched transmitter/receiver pairs mean easy plug & play installation• Transmitter accepts up to four 4-20 mA inputs• Receiver outputs up to four 4-20 mA signals• 12 bit resolution• Quick, easy installation

SPECIFICATIONS31 mW transmission powerFrequency 902-928 MHz in the ISM bandUser selects from 8 discrete intervals determining how often output is refreshed and updated (increments range from 1 second to 30 minutes)In power saving mode the sensor is only on while the radio is transmittingPower Consumption (maximum)Receive 85 mATransmit 185 mADimensionsReceiver approximately 6.25"x 3.25" x 2.5" (160 x 85 x 65 mm)Transmitter approximately 6.25" x 3.25" x 2.5" (160 x 85 x 65 mm)IP 67 Housing for waterproof operationIf radio communication is lost, output will be 0 mA

Receives and Transmits up to 4 Signals



C

PC Recorder and Remote I/O and PC Recorder Software

Catalog No. Model Input and Output Type Input and Output Range Communication PriceMS121172 R1M-GH2 DC Voltage or T/C input(16CH) ± 10mV to +-20V DC MODBUS RTU(38.4kbps) $1,200.00

T/C(PR,K,E,J,T,B,R,S,C,N, etc.)MS121173 R1M-J3 Platinum RTD or POT input(8CH) Platinum RTD MODBUS RTU(38.4kbps) 1,200.00

0-100, 0-500, 0-1k, 0-10k ohmMS121174 R1M-A1 Dry contact input - 32 Channel — MODBUS RTU(38.4kbps) 640.00MS121175 R1M-D1 Dry contact output - 32 Channel — MODBUS RTU(38.4kbps) 640.00MS121176 R2M-2H3 Thermocouple input - 8 Channel T/C(PR,K,E,J,T,B,R,S,C,N) MODBUS RTU(38.4kbps) 720.00MS121177 R2M-2G3 DC Current Input 4-20 mA MODBUS RTU(38.4kbps) 600.00

Accessories

Model Model Description PriceMS121178 REM3 Precision resistor module (250ohm) 20.00MS121179 R1CON R1X Configuration software & cable kit 150.00MS121180 MSRPAC2001 Free software with R1M —

Please inquire for NIST Certification.

R1M/R2M• Modbus RTU Network• High Speed Sampling 50ms/8 ch• External Trigger Input• RS-485 and RS232C Communication Port• Remote Limit Alarming• Data Collection by PC Recorder Software

MSRE32 PC Recorder Software• Ideal for logging, trending and analyzing

continuous process and batch applications• Up to 32 channels can be monitored simulta-

neously• Four network R1M modules can be polled

with remote limit alarming• Notifies personnel when an event occurs

and possible actionis needed

• Included with purchases of R1M/R2M mod-ules

• Works with all R1M/R2M modules

MSR16H PC Recorder Software• Ideal for capturing and analyzing system

events and fast transient occurrences, typi-cally caused by sensor failure, vibration,temperature fluctuations and power surges.

• Works with the thermocouple/DC volt/currentmodule only

• Included with purchase of R1M/R2M mod-ules

NIST it

Save 50%on 2nd year

recalibration

Ask about2 YearNIST

Programmable 10 Circular Chart Recorder NIST · processor-based circular chart recorders with over...

Documents

Transcript of Programmable 10 Circular Chart Recorder NIST · processor-based circular chart recorders with over...