6th Latin American CFD Workshop Applied to the Oil and Gas Industry

2014 6

edition

th

Organization

Sponsor

December 02, 2014Windsor Florida Hotel - Rio de Janeiro - Brazil

Agência Nacional do Petróleo, Gás Natural e Biocombustíveis

Program

6th Latin American CFD Workshop Applied to the Oil and Gas Industry2014 6

edition

th

KEYNOTE SPEAKERS

Dr. Tsuji is a professor emeritus of Osaka University. He received the B.E. and M.E. degrees in Aeronautical Engineering at University of Osaka Prefecture and the D.E. degree in Mechanical Engineering at Osaka University. Since 2006 he is the chair person of the international Liaison Committee of APPIE (Association of Powder Process Industry and Engineering). His research field is measurement and numerical analysis of gas-particle multiphase flows.

Yutaka Tsuji, Dr. Professor Osaka University

Dr. Meeks has led product development and engineering services for more than 15 years at Reaction Design, including oversight of all major software releases, industry consortia, and several government-funded research projects. She was one of the principal developers of the CHEMKIN Software.

Ellen Meeks, Ph.D. Development Director ANSYS, Inc.

Dr. Capela is graduated in Civil Engineering at Polytechnic School of the University of São Paulo (USP), with a Master’s in Chemical Engineering, and Ph.D. in Mechanical Engineering from Coppe / UFRJ. Dr. Capela joined Petrobras in 1978. Since then, he has been coordinating different projects of basic engineering and research and development, focused on Primary Processing of Petroleum. He also specializes in phase separation and cyclonic technology.

Carlos Alberto Capela Moraes, Dr. Technical Consultant PETROBRAS

Dr. Hinojosa has Master’s and PhD. degrees in Chemical Engineering from Universidad Nacional Autónoma de México. He has experience in research and development applied to reservoir fluids properties calculation and process simulation. He also worked in several projects with PEMEX, using CFD applied to flow assurance processes.

Humberto Hinojosa, Ph.D. Reservoir Specialist GRUPO SSC

PROGRAM

Plenary Session Technical Keynote Speakers Technical Session

6th Latin American CFD Workshop Applied to the Oil and Gas Industry2014 6

edition

th

8:00 REGISTRATION OPEN

9:00 Applications of Reactive Flow Modeling in the Oil & Gas IndustryEllen Meeks, Ph.D. - ANSYS, Inc.

9:40 Use of CFD for Design and Research of Operating Conditions of SSAO Project at Marlim FieldCarlos Alberto Capela Moraes, Dr. - PETROBRAS

10:20 REFRESHMENTS IN EXHIBITION AREA / POSTER SESSION

11:00 Numerical Analysis of Dense Phase Gas-Solid Flows (Modelling and Applications)Yutaka Tsuji, Dr. - Osaka University

11:30 PVT Module Coupled with ANSYS CFD – Case StudiesHumberto Hinojosa, Ph.D. - GRUPO SSC

12:10 LUNCH

Room GUANABARA EXCELSIOR

13:40 ANSYS-CFD Applied to the Oil Industry in Mexico Luis Fernando López Cisneros - PEMEX-PEP

CFD Code Validation via Ultra-reduced Model Testing in LOC - COPPE / UFRJAntonio Carlos Fernandes - COPPE / UFRJ

14:10 Atomizers Simulation: A Model Validation for Industrial Cases Rodrigo Bernardo Medeiros - PETROBRAS / ESSS

CFD Modeling of the Effect of Wall Proximity on Vortex SheddingÉrico Almeida Santos - PETROBRAS

14:30CFD Investigation on the Influence of Turbulence Models for Gas-Solid Flow in a Circulant FluidizedJosé Luis Gomez Vergel - UNICAMP

Ultrasonic Flow Meter: How Line Dimensions Can Impact Quality of MeasurementAmanda Briggs - PETROBRAS / ESSS

14:50 Lifecycle Management: Increasing IT Productivity and EfficiencyAlaor Neto - Planus

Derfel Methodology for Detectors Allocation in Industrial Areas Igor Ribeiro de Souza - Safe Solutions Engenharia

15:10A CFD Methodology for Modelling the Cool Down Process in a 3-Phase Subsea Separator TankPatrick Farias - FMC Technologies

High Performance Computing for Oil and Gas IndustryPaul Holzhauer - NVIDIA

15:30 Numerical Simulation of a Plate Heat ExchangerRodrigo Peralta - PETROBRAS / ESSS

Simulation of the Dissociation of a Hydrate Plug in Horizontal LinesLeandro Saraiva Valim - PETROBRAS

15:50 REFRESHMENTS IN EXHIBITION AREA / POSTER SESSION

16:20Comparison Between Single and Coupled Cyclone Simulations, Evaluating the Influence of the Nonuniformity Velocity Profile at Inlet.Rodrigo Bernardo Medeiros - PETROBRAS / ESSS

Mass Transfer in Multicomponent Gas-Liquid Flow in a MicrodeviceNatan Padoin - UFSC

16:40 Hardware Solutions for Oil and Gas IndustryEdson Almeida - Lenovo

A numerical Study and Analysis of the Reactive Flow of a Microturbine Combustor with a Rotating CasingDiogo Dantas Ribeiro - PETROBRAS

17:00Improving the Efficiency of Oil Desalters Through Variations in Geometric ParametersGuilherme Pimentel - PETROBRAS

CFD Modeling of the Combustion Gases of a Ground Flare and the Dispersion of Pollutants GeneratedPaulo Roberto Pagot - PETROBRAS

17:20 Optimization of a Cross-Flow Heat ExchangerBrayan Marcelo Paredes - ESSS

Nitrogen Oxides Selective Non Catalytic Reduction (SNCR) in Industrial Furnaces Regarding Back Mixing Effect Fernando César Lopes de Oliveira - PETROBRAS

17:40 CFD Simulation of Non-Newtonian Flow Inside a Mixing Tank Maribel Valverde Ramirez - UFSCAR

CFD Study of a Higher Stack Displacement than Expected by DesignAna Paula da Silva Faria - ESSS

18:00 CLOSING SESSION

6th Latin American CFD Workshop Applied to the Oil and Gas Industry2014 6

edition

th

TRAINING COURSEIntegrated Computational Method for Reaction and Combustion Modeling

Contents:1. Introduction to Reaction Design solutions for combustion systems:

Chemkin Pro, Energico and Reaction Workbench;

2. Hands-on Chemkin Pro simulation;3. A brief overview of reacting flow simulation on ANSYS CFD;4. Hands-on Fluent and Chemkin Pro coupling.

VenueESSS OfficeAddress: Av. Presidente Vargas, 3131 - 12º floor - room 1203 City: Rio de Janeiro/RJ CEP: 20210-031

Instructors: Ellen Meeks, Ph.D. - ANSYS, Inc. Raphael Aquilino Bacchi, M.Sc. – ESSS

Date: December 03, 2014Duration: 08 hoursInvestment: R$ 1.150,00 (20% discount for students).

uu DECEMBER 03