PB 0

109E

24/7 Helpline+31 (0) 512 585 555

germany Telephone: +49 (0) 1729 72 93 02 • Fax +49 (0) 2821 97 34 19

italy Telephone: +39 (0) 340 0917925 • Fax +31 (0) 512 524 599

united kingdomTelephone: +44 (0) 7951 070800 • Fax: +44 (0) 1253 766420

www.dunlopconveyorbelting.com

the netherlands (head office)Telephone: +31 (0) 512 585 555 • Fax: +31 (0) 512 524 599Dunlop Conveyor Belting • Oliemolenstraat 2 • PO Box 14 9200 AA Drachten • The Netherlands

franceTelephone: +33 (0) 13055 3903 • Fax: +33 (0) 13054 0238Dunlop Conveyor Belting • 122 Rue des Cerisiers • ZI Sainte Apolline 78370 Plaisir • France

poland Telephone: +48 (0) 322 185 070 • Fax: +48 (0) 322 185 080 Dunlop Conveyor Belting • ul. wirki i Wigury 54 43-190 Miko ów • Poland spainTelephone: +34 (0) 93 805 54 46 • Fax: +34 (0) 93 805 42 69Dunlop Conveyor Belting • C/ Galicia No. 7 Planta 1ª 08700 • Igualada (Barcelona) • Spain

russia Telephone: +7 495 223 6718 • Fax: +7 495 223 6719Dunlop Conveyor Belting • ul. Bolshaya Pochtovaya 26B • office 405 105082 Moscow • Russia

All data and recommendations in this brochure have been supplied to the best of our knowledge, as accurately as possible and updated to reflect the most recent technological developments. Some products may have been rendered obsolete in the light of more recent technological developments. We cannot accept any responsibility for recommendations based solely on this brochure.

dunlop prof iled Beltst h e w o r l d s t a n d a r d i n

q u a l i t y a n d r e l i a B i l i t y

dunlop high qualit y profiled conve yor BeltsThe COST-eFFeC TIve SOluTION TO A WIDe R ANGe OF DeM ANDS

When reliable conveyor belts for steep inclines are needed,possibly as steep as 30º or even 40º, then the solution will almost certainly be found within the excellent range of Dunlop profiled belts. Our Chevron, High Chevron, Multiprof®, Fishbone and Rufftop profiled belts have been specifically developed to meet the demands of a wide range of applica-tions, from packed products to bulk material of up to 80 mm lump size. Dunlop profiles are available in several high quality covers including abrasion, heat, fire, oil and fat resistant.

slope angle Chevron and High Chevron can be successfully used on slope angles up to approx. 30º for slightly rolling materials such as gravel and coal and up to approx. 40º for sticky materials such as wet sand and earth. It is also a highly effective belt for conveying packages such as sacks and bales.

carcass construction The ultra reliable Dunlop Superfort® and Dunloflex® carcasses, with their polyester-nylon (EP) fabric plies, provide long elonga-tion, high tensile strength and are impervious to moisture.

Other constructions available on request.* For ROS and Betahete cover qualities the pulleys should be selected one step larger in diameter.

Other constructions available on request.* For ROS and Betahete cover qualities the pulleys should be selected one step larger in diameter.

chevron and high chevronThe multi-functional, wear-resistant profiled belt for steep angle conveying. The profiles are moulded and vulcanised in one single process together with the belt. One of the key advantages of this very solid construction is that it allows the use of smaller pulley diameters. The 16 mm high Chevron profile is suitable for lump sizes up to 30 mm. For larger lump sizes (up to 80 mm) the Dunlop High Chevron profile with 32 mm high profiles will provide the solution.

belt widthStandard widths range from 400 up to 1600 mm, depending on profile.

Cover qualities Available in RA, Betahete and ROS quality. Other qualities available on application.

Belt edgesChevron and high chevron belts are supplied with moulded edges.

chevron high chevron

HIGH CHEVRONCHEVRON

400 C 330/16 D 250/2 330 16 250 2+1.5 6.5 3.9 250*

500 C 430/16 D 250/2 430 16 250 2+1.5 6.5 5.2 250*

600 C 530/16 D 250/2 530 16 250 2+1.5 6.5 6.0 250*

650 C 530/16 D 250/2 530 16 250 2+1.5 6.5 6.4 250*

650 C 530/16 S 400/3 530 16 250 3+1.5 7.5 7.2 315

800 C 650/16 S 400/3 650 16 333 3+1.5 7.5 8.5 315

1000 C 800/16 S 400/3 800 16 333 3+1.5 7.5 10.2 315

1200 C 1000/16 S 500/4 1000 16 333 3+1.5 8.4 14.5 500

Belttype

Coverthickness

(mm)

Beltthickness

(mm)

Beltweight

(kg/m)

Minimumpully ø

(mm)

Profile

Height (mm)

Pitchness (mm)

Dimensions of the profile

Width (mm)

Minimumpully ø

(mm)

Beltwidth

(mm)

500 HC 450/32 S 250/2 450 32 250 2+1.5 6.5 6.2 315*

600 HC 450/32 S 250/2 450 32 250 2+1.5 6.5 6.9 315*

650 HC 450/32 S 250/2 450 32 250 2+1.5 6.5 7.3 315*

650 HC 450/32 S 400/3 450 32 250 3+1.5 7.5 7.5 315*

650 HC 600/32 S 250/2 600 32 333 2+1.5 6.5 8.2 315*

800 HC 600/32 S 400/3 600 32 333 3+1.5 7.5 9.7 315*

1000 HC 800/32 S 500/4 800 32 333 4+2 9.9 14.7 500

1200 HC 1000/32 S 500/4 1000 32 333 4+2 9.9 17.3 500

1400 HC 1200/32 S 550/4 1200 32 333 4+2 9.9 21.6 500

1600 HC 1200/32 S 550/4 1200 32 333 4+2 9.9 24.0 500

Beltwidth

(mm)

Belttype

Coverthickness

(mm)

Beltthickness

(mm)

Beltweight

(kg/m)

Profile

Height (mm)

Pitchness (mm)

Dimensions of the profile

Width (mm)

multiprof ®

Multiprof® is the definitive multi-functional profiled belt for inclined conveying. It has been developed by Dunlop speci-fically for transporting packaged goods such as boxes, bags and baggage as well as bulk materials including agricultural products, oily materials, woodchips and wet sand. Multiprof® profiled belting can be used at a slope angle as high as 30°. This belt has excellent drainage qualities, runs quietly, is simple to clean and can be supplied for every type of installation.

excellent range of cover qualities

* In some cases (with products containing high concentrations of animal and vegetable oils) ROS should be selected.

Other cover qualities for special applications are available on request.

carcass constructionMultiprof® can be supplied in Superfort® and Dunloflex® carcasses. All of which have EP fabric plies, providing low elongation, high tensile strength and are impervious to moisture. Other belt types for special applications available on request.

belt width availability Standard widths range from 550 mm up to 1200 mm.

cover quality Available in RA, Betahete, ROM and ROS cover qualities.

belt edgesThese belts can be supplied with solid rubber edges.

Dunlop cover quality

Abrasionresistant

Heat resistantOil- and fat resistant

RA

Betahete

ROM

ROS

Y

T

G*

G

D -30

-20

-20

-20

80

80

80

90

120

SBR/NBR

NBR

Heat resistant for conveying materials at moderate temperatures.Oil and fat resistant for most productswith animal and vegetable oils and fats.Oil and fat resistant for products containing mineral oils and greases.

DIN quality

y

EN/ISOquality

High abrasion resistance for normal service conditions.

Technical featuresApplication area

Base polymer

PeakMaterial

Cont.Material

Min.Ambient

Permissible temperature ºC

150 170 SBR

SBR100

fishBone and ruff top

application areaThe reliable profiled belt for conveying packed goods such as cardboard boxes, crates, jute and cement sacks. Fishbone is equally suitable for conveying bulk material in troughed installations. Both Fishbone and Rufftop are available in slider belt construction. Depending on the application, both of these profiled belts can be used for inclined conveying.

carcass Superfort® with EP fabric plies, which is impervious to moisture and provides both low elongation and high tensile strength.

belt width availability Fishbone up to 1150 mm, Rufftop up to 2000 mm.

unrivalled technic al support and guidanceWhen you buy from Dunlop you get more than just quality conveyor belts because we have one of the largest, most experienced and highly trained teams of conveyor belt specialists and application engineers in the industry.

Dunlop provides an unrivalled level of customer service, visiting our customers on-site, providing advice, guidance and practical support including:

• SITE VISITS AND SuRVEYS• BElT CAlCulATION SERVICE• TECHNICAl TRAINING (ON-SITE AND DuNlOP BASED)• SPlICE TRAINING• TROuBlE SHOOTING AND PROBlEM SOlVING• IN-HOuSE RESEARCH, TESTING AND DEVElOPMENT• AFTER-SAlES SuPPORT

Fishbone profile

cover qualitiesAvailable in RA, ROM and ROS quality. Other cover qualities are available upon request.

belt edgesThese belts can be supplied with a choice of either cut or sealed edges.

belt selectionThe correct choice of belt type and cover quality is dependent on several different factors. Because working conditions can be very different it is important to give as much information as possible to enable the correct belt type to be chosen. The final choice from the available options for each application will depend on conditions, which may differ from location to location.

Rufftop profile

Our 24-hour Helpline means that we are never more than a phone call away when our customers need our help or advice. This service is extremely well supported by our extensive network of highly reputable Dunlop Authorised Distributors, Vulcanisers and Approved Agents.

we are here to help!If you have any concerns or questions, please call our Application Engineering Department on +31 (0) 512 585 555.

24/7 Helpline+31 (0) 512 585 555