Prof. Vineet Kansal DR. APJ ABDUL KALAM TECHNICAL ......Prof. Vineet Kansal Dean UGSE DR. APJ ABDUL...
7
Prof. Vineet Kansal Dean UGSE DR. APJ ABDUL KALAM TECHNICAL UNIVERSITY Sector-11, Jankipuram Extension, Lucknow E-mail:[email protected] Ref:AKTU/DeanUGSE/2019/162 Date: 04 April 2019 To Directors/Principals Institutes /Colleges affiliated to Dr. APJ Abdul Kalam Technical University Lucknow,Uttar Pradesh Subject: Regarding submission of selected prototypes of Innovation Gallery Round 3 and Round 4 on 9 April 2019 Dear Sir/Ma’am In continuation of University Letter Ref. AKTU/DeanUGSE/2019/147 dated 11 Feb 2019 and Ref: AKTU/DeanUGSE/2019/152 dated 05 March 2019 regarding result announcement of selected students for Dr. Kalam Innovation Gallery (both letters are attached herewith). The Colleges/ Institutions are requested to ensure the submission of developed prototype as per details below: Date: 9 April 2019 Time: 11:30 AM Venue: Digital Library, Dr. APJ Abdul Kalam Technical University, Sector 11 Jankipuram Ext. Lucknow Contact Person: Abhishake Nandan (Mobile - 8707728907) You are also requested to ensure the submission of claims for these prototypes as per previous circular regarding the same matter along with the followings: 1. Beneficiary Name (College) 2. Bank IFSC Code 3. Credit Account Number 4. Pan Number 5. Receiving of claimed amount from student Looking forward for your kind cooperation. Should you have any concern, feel free to write at [email protected] With warm regards (Prof.Vineet Kansal) Dean Under Graduate Studies and Entrepreneurship Copy to: 1. Registrar, AKTULucknow 2. Finance Officer, AKTU Lucknow 3. Controller of Examination, AKTU Lucknow 4. Coordinator TEQIP- 3, AKTU Lucknow 5. System Manager, AKTU Lucknow 6. Media Prabhari, AKTU Lucknow 7. Vyasvastha Adhikari, AKTU Lucknow 8. Staff OfficerHon’ble Vice Chancellor for kind information (Prof.Vineet Kansal)
Transcript of Prof. Vineet Kansal DR. APJ ABDUL KALAM TECHNICAL ......Prof. Vineet Kansal Dean UGSE DR. APJ ABDUL...
-
Prof. Vineet Kansal
Dean UGSE
DR. APJ ABDUL KALAM TECHNICAL UNIVERSITY
Sector-11, Jankipuram Extension, Lucknow
E-mail:[email protected]
Ref:AKTU/DeanUGSE/2019/162 Date: 04 April 2019
To
Directors/Principals
Institutes /Colleges affiliated to Dr. APJ Abdul Kalam Technical University
Lucknow,Uttar Pradesh
Subject: Regarding submission of selected prototypes of Innovation Gallery Round 3 and Round 4 on
9 April 2019
Dear Sir/Ma’am
In continuation of University Letter Ref. AKTU/DeanUGSE/2019/147 dated 11 Feb 2019 and Ref:
AKTU/DeanUGSE/2019/152 dated 05 March 2019 regarding result announcement of selected students for
Dr. Kalam Innovation Gallery (both letters are attached herewith).
The Colleges/ Institutions are requested to ensure the submission of developed prototype as per details below:
Date: 9 April 2019
Time: 11:30 AM
Venue: Digital Library, Dr. APJ Abdul Kalam Technical University, Sector 11 Jankipuram Ext. Lucknow
Contact Person: Abhishake Nandan (Mobile - 8707728907)
You are also requested to ensure the submission of claims for these prototypes as per previous circular regarding
the same matter along with the followings:
1. Beneficiary Name (College) 2. Bank IFSC Code 3. Credit Account Number 4. Pan Number 5. Receiving of claimed amount from student
Looking forward for your kind cooperation. Should you have any concern, feel free to write at [email protected]
With warm regards
(Prof.Vineet Kansal)
Dean Under Graduate Studies and Entrepreneurship
Copy to:
1. Registrar, AKTULucknow
2. Finance Officer, AKTU Lucknow
3. Controller of Examination, AKTU Lucknow
4. Coordinator TEQIP- 3, AKTU Lucknow
5. System Manager, AKTU Lucknow
6. Media Prabhari, AKTU Lucknow
7. Vyasvastha Adhikari, AKTU Lucknow
8. Staff OfficerHon’ble Vice Chancellor for kind information
(Prof.Vineet Kansal)
mailto:[email protected]
-
Prof. Vineet Kansal
Dean UGSE
DR. APJ ABDUL KALAM TECHNICAL UNIVERSITY
Sector-11, Jankipuram Extension,Lucknow
E-mail:[email protected]
Ref:AKTU/DeanUG/2019/147 Date: 11 Feb 2019
To
Directors/Principals
Institutes /Colleges affiliated to Dr. APJ Abdul Kalam Technical University
Lucknow,Uttar Pradesh
Subject: Regarding announcement of result for Innovation Gallery – Water Challenge
Dear Sir/Ma’am
In continuation of University Letter Ref. AKTU/DeanUGSE/2018/122 Dated 21 Dec 2019, I am glad to
share that we received excellent response for prototype grant. After screening in the first round, and taking
presentations at AKTU on 15th January 2019, five ideas were selected (Annexure 1) for prototyping grant and
exhibition as per predefined format and guidelines (Annexure 2) in Digital Library at Dr. APJ Abdul Kalam
Technical University, Lucknow.
Please ensure that the students of your institute prepare his/her prototype within 45 days and ready to exhibit at
next announcement.
The Colleges/ Institutions are requested for financial support upto Rs. 12000/- only towards the prototype
development of selected students, the same amount will be reimbursed through university.
Looking forward for your kind cooperation please.
Should you have any concern, feel free to write at [email protected]
With warm regards
(Prof.Vineet Kansal)
Dean Under Graduate Studies and Entrepreneurship
Copy to:
1. Registrar,AKTU,Lucknow
2. Finance Officer,AKTU ,Lucknow
3. Controller of Examination,AKTU,Lucknow
4. Coordinator TEQIP, AKTU, Lucknow
5. System Manager AKTU,Lucknow
6. Staff Officer Hon’ble Vice Chancellor for kind information
(Prof.Vineet Kansal)
mailto:[email protected]
-
Annexure 1
SELECTED STUDENTS FOR PROTOTYPING GRANT
Sr. No. Name of Student Roll Number College Name
1 Rohan Sharma 1503331096 Raj Kumar Goel Institute of Technology, Ghaziabad
2 Ananya shukla 1705714906 International Institute for Special Education (IISE), Lucknow
3 Shashank Agarwal 1516140180 Krishna Engineering College, Ghaziabad
4 Akash Deep Singh 1634840005 PSIT College Of Engineering, Kanpur
5 Shiv Abhishek Soni 1634831050 PSIT College Of Engineering, Kanpur
-
Annexure 2
Students need to prepare an infographic for their prototype to exhibit in the Innovation Gallery.
Format: Standee (iron frame)
Dimensions: 6x3 feet
Template:
Dr. A.P.J. Abdul Kalam Technical University
Dr. Kalam Innovative Gallery
Prototype Title:
Prototype Description:
Diagrams/Screenshots:
Team Leader/Members:
Links: Website, Facebook Twitter etc.
AKTU
Logo
-
Prof. Vineet Kansal
Dean UGSE
DR. APJ ABDUL KALAM TECHNICAL UNIVERSITY
Sector-11, Jankipuram Extension, Lucknow
E-mail:[email protected]
Ref:AKTU/DeanUGSE/2019/152 Date: 05 March 2019
To
Directors/Principals
Institutes /Colleges affiliated to Dr. APJ Abdul Kalam Technical University
Lucknow,Uttar Pradesh
Subject: Regarding announcement of result for Innovation Gallery on differently abled persons
(Divyangjan).
Dear Sir/Ma’am
In continuation of University Letter Ref. AKTU/DeanUGSE/2018/116, dated 13 December 2018, I am glad to share that we received excellent response for prototype grant. After screening in the first round, and
taking presentations at AKTU on 12 Feb 2019 (Letter Ref. AKTU/DeanUGSE/2019/145, dated 08 Feb. 2019) seven ideas were selected (Annexure 1) for prototyping grant and exhibition as per predefined format and
guidelines(Annexure 2) in Digital Library block at Dr. APJ Abdul Kalam Technical University, Lucknow.
Please ensure that the students of your institute prepare his/her prototype within 30 days and ready to exhibit at next announcement.
The Colleges/Institutions are requested for financial support upto Rs. 12000/- only towards the prototype
development of selected students, the same amount will be reimbursed through University.
Looking forward for your kind cooperation please.
Should you have any concern, feel free to write at [email protected]
With warm regards
(Prof.Vineet Kansal)
Dean Under Graduate Studies and Entrepreneurship
Copy to:
1. Registrar, AKTU Lucknow
2. Finance Officer, AKTU Lucknow
3. Controller of Examination, AKTU Lucknow
4. Coordinator TEQIP, AKTU Lucknow
5. System Manager, AKTU Lucknow
6. Media Prabhari, AKTU Lucknow
7. Staff Officer Hon’ble Vice Chancellor for kind information
(Prof.Vineet Kansal)
mailto:[email protected]
-
Annexure 1
SELECTED STUDENTS FOR PROTOTYPING GRANT
Sr. No. Name Roll Number College Name
1 Mukul Verma 1534840041 PSIT College of Engineering, Kanpur
2 Krishant Tomar 1609540012 Mahatama Gandhi Mission College of Engg. &
Technology, Gautam Buddh Nagar
3 Ghanistha Garg 1769540014 Sri Ram Group of Colleges, Muzaffarnagar
4 Monika Anand 1609531014 Mahatama Gandhi Mission College of Engg. & Technology, Gautam Buddh Nagar
5 Anmol 1609131026 J.S.S. Academy of Technical Education, Gautam Buddh Nagar
6 Araman Sahu 1702921036 KIET Group of Institutions (Krishna Instt. of Engg. & Technology),Ghaziabad
7 Varun Sharma 1819214809 G.L. Bajaj Institute of Technology &
Management, Gautam Buddh Nagar
-
Annexure 2
Students need to prepare an infographic for their prototype to exhibit in the Innovation Gallery.
Format: Standee (iron frame)
Dimensions: 6x3 feet
Template:
Dr. A.P.J. Abdul Kalam Technical University
Dr. Kalam Innovative Gallery
Prototype Title:
Prototype Description:
Diagrams/Screenshots:
Team Leader/Members:
Links: Website, Facebook, Twitter etc.
AKTU
Logo
