Pro/E WILDFIRE, week1
Transcript of Pro/E WILDFIRE, week1
1
1
Pro/E WILDFIRE, week1
1.Feature-based
• Represented by extrusion, cuts, holes, slots, …
• Not represented by lines, arcs, circles
2.Parametric
• Values assigned to the attributes (primarily dimensions) of its feature
3.Solid modeling
• The created model has volume. CAE
2
All Programs>Pro Engineer>Pro Engineer
2
3
Navigator controls
Browser controls
3D working space
4
Main graphics area
Pull-down menu
Shortcut buttons
Directories
4
7
Click File>New to create new objects
Check “Part” and “Solid” and Name “block1”
8
Click “Sketch Tool”
5
9
Click “Front plane” as sketch plane
Decide orientation
10
Now, you are in the 2D sketch mode.
Click “Create rectangular”
6
11
Drag your mouse to create a rectangular and click your left mouth
button to finish.
12
Double click dimensions to create a symmetric rectangular with width of 200 and height of 300
Note: My background color is intentionally changed for carbon printing.
7
13
Click “Check mark” to continue with this section
14
Click “Extrude Tool” to create a block with this section
9
17
Click check mark to save changes you have made
18
If you want to change the extrusion distance, highlight “Extrusion 1” and choose “Edit Definition”
10
19
If you want to change dimensions you did in 2D sketch plane, highlight “Sketch 1” and choose “Edit Definition”
20We finish creating a block!
11
21Extrusion distance : 1.2
Lab assignment cad week1(You should finish it before your leaving from your lab)
Draw this block and print its isometric view as shown next slide.
22
Lab assignment cad week1 (You should finish it before your leaving from your lab)
Submit this with your section number and your name.
801 BYUNGKI KIM