Produktbeschreibung Profile machining centre SBZ 122/74...A-axis angle adjustment -120° to +120°...
3
SBZ 122/74 29-06-2016 1:22 pm Page 1 of 3 elumatec AG Pinacher Straße 61 75417 Mühlacker Germany Phone +49 7041 14-0 Fax +49 7041 14-280 [email protected] www.elumatec.com The right to make technical alterations is reserved. SBZ 122/74 PROFILE MACHINING CENTRE PROFILE MACHINING CENTRE SBZ 122/74 The family of entirely redesigned SBZ 122 models have set new benchmarks in terms of performance, ergonomics and utility in the entry-level segment of the aluminium, PVC and steel profile machining industry. Intelligent control technology, powerful servo motors and a machine bed designed for high rates of travel deliver perfect finishing with high speed and efficiency. State-of-the-art components such as the control system, the RPM-regulated spindles and the energy-efficient drives save operating costs and ensure optimal machining results. The new generation of SBZ 122 machines maximize the available machining area while minimizing the footprint, providing an additional boost to the total productivity per square meter. The model series' modular design is another advantage. It makes it easy to configure the machine to perfectly match the customer's various requirements. The different models and equipment variants allow users to configure and select a machine the perfectly fits their requirements: SBZ 122/74: 4-axis model for metal construction and industrial applications includes autonomous clamp positioning, clamps with linear guides, A-axis for continuously variable angle adjustment, tapping without a compensation chuck Your advantages at a glance Machining area up to 300 x 300 mm Minimized footprint thanks to the machine's protective enclosure Precise machining results even at high rates of travel Low power consumption thanks to the intelligent control technology High process reliability, even under quickly changing loads, due to RPM-regulated spindles
Transcript of Produktbeschreibung Profile machining centre SBZ 122/74...A-axis angle adjustment -120° to +120°...
SBZ 122/74 29-06-2016 1:22 pm Page 1 of 3
elumatec AGPinacher Straße 6175417 MühlackerGermany
Phone +49 7041 14-0Fax +49 7041 [email protected]
The right to make technical alterations isreserved.
SBZ 122/74PROFILE MACHINING CENTRE
PROFILE MACHINING CENTRE SBZ 122/74
The family of entirely redesigned SBZ 122 models have set new benchmarks in terms ofperformance, ergonomics and utility in the entry-level segment of the aluminium, PVC andsteel profile machining industry. Intelligent control technology, powerful servo motors and amachine bed designed for high rates of travel deliver perfect finishing with high speed andefficiency. State-of-the-art components such as the control system, the RPM-regulatedspindles and the energy-efficient drives save operating costs and ensure optimal machiningresults. The new generation of SBZ 122 machines maximize the available machining areawhile minimizing the footprint, providing an additional boost to the total productivity persquare meter. The model series' modular design is another advantage. It makes it easy toconfigure the machine to perfectly match the customer's various requirements. Thedifferent models and equipment variants allow users to configure and select a machine theperfectly fits their requirements:
SBZ 122/74: 4-axis model for metal construction and industrial applications
includes autonomous clamp positioning, clamps with linear guides, A-axis for continuouslyvariable angle adjustment, tapping without a compensation chuck Your advantages at aglance
Machining area up to 300 x 300 mmMinimized footprint thanks to the machine's protective enclosurePrecise machining results even at high rates of travelLow power consumption thanks to the intelligent control technologyHigh process reliability, even under quickly changing loads, due to RPM-regulatedspindles
SBZ 122/74 29-06-2016 1:22 pm Page 2 of 3
elumatec AGPinacher Straße 6175417 MühlackerGermany
Phone +49 7041 14-0Fax +49 7041 [email protected]
The right to make technical alterations isreserved.
Short machining cycles thanks to the servo axes' high rate of travelErgonomic operation thanks to the modern inclined bed, uncovered spindle and height-adjustable control unitIncreased work safety thanks to remote-controlled clamp activation and protectiveenclosureMachine installation within a very short period of time
A-axis angle adjustment Four-axis machine SBZ 122/74 with continuously adjustableangle setting from -120° to +120° in the SBZ 122/74 New machine bed The new design isfully comprehensive. The travelling column moves on a machine bed that is executed as amodern inclined bed. Swarf automatically falls off of the 45° incline, making cleaning mucheasier. The operator can step close to the workpiece table when positioning profiles,ensuring an ergonomic economy of motion. The bed is dimensioned for high rates of travelwith minimal oscillation. The machine has a large work area despite its small overallfootprint. Noise reduction is a further benefit of the protective enclosure. Clamps Includedas standard equipment on the SBZ 122 are four completely redesigned clamps featuring aslim form and high degree of stiffness. The machine can optionally be equipped with up toeight clamps. In the SBZ 122/74, the clamps are equipped with linear guides instead ofround guides. Technical specifications
Max. processing length 4,100 mmA-axis angle adjustment -120° to +120° continuously adjustableTraverse path X-axis 4,170 mm, Vmax. 100 m/min.Traverse path Y-axis 900 mm, Vmax. 60 m/min.Traverse path Z-axis 500mm, Vmax. 30 m/min.Routing spindle speed max. 20,000 rpmRouting spindle power 7 kW, S1Tool holder HSK-63FAutomatic tool changingClamp positioning autonomousClamps Premium (with linear guides)
Configuration options
Optional protective enclosure to completely enclose the machine on all sides, withadditional sound insulation.Easy and intuitive operation thanks to the modern elumatec Customer Interface (ECI)Stationary tool magazine with four positions, optional flexible expansion to includeadditional tool magazines for a total of up to 20 positions.Four clamps as standard. Up to eight clamps can be equipped as an optionOptional material reference stop (right) for positioning workpiecesAdditional configuration options: multi-spindle boring heads, vacuum clamping tables,double clamping and other accessories on request
SBZ 122/74 29-06-2016 1:22 pm Page 3 of 3
elumatec AGPinacher Straße 6175417 MühlackerGermany
Phone +49 7041 14-0Fax +49 7041 [email protected]
The right to make technical alterations isreserved.
A-axis angleadjustmentFour-axis machine SBZ122/74 with continuouslyadjustable angle settingfrom -120° to +120°
Profile machiningcentre SBZ 122/74New machine bed
ClampsIncluded as standardequipment on the SBZ 122are four completelyredesigned clampsfeaturing a slim form andhigh degree of stiffness.The machine canoptionally be equippedwith up to eight clamps. Inthe SBZ 122/74, theclamps are equipped withlinear guides instead ofround guides.
Traverse path, Y and Z-axes SBZ122/74Profile machining fromabove
Traverse path, Y and Z-axes SBZ122/74Profile machining fromabove and from behind
Traverse path, Y and Z-axes SBZ122/74Profile machining from thefront and from behind
