PRODUCTS, SERVICES AND AGENCIES

PRODUCTS, SERVICES AND AGENCIES www.iretrading.com IRE TRADING LLC Add: PO Box 283374 Dubai, UAE Tel: +971 4 884 8149 Fax: +971 4 884 8186 Email: [email protected]

Transcript of PRODUCTS, SERVICES AND AGENCIES

Page 1: PRODUCTS, SERVICES AND AGENCIES

PRODUCTS, SERVICESAND AGENCIES

www.iretrading.com

IRE TRADING LLC Add: PO Box 283374 Dubai, UAETel: +971 4 884 8149 Fax: +971 4 884 8186 Email: [email protected]

admin
Typewritten text
ISO-4687
admin
Typewritten text
Q1-3265
Page 2: PRODUCTS, SERVICES AND AGENCIES

www.iretrading.com

PRODUCTSWe stock and supply a wide range of equipment including:

HOISTING& ROTARY

● Top Drive Spare Parts● Kelly Spinners● Rotating Mousehole● Motors & VFD’s● Sheaves● Instrumentation● Deadline Anchors

DRILL STEMVALVES

● Top Drive IBOPs and Hydraulic Actuators● Full Opening Safety Valves (FOSVs)● Stab-in IBOPs● Drop-in Retrievable Check Valves● Drill Pipe Float Valves (Type F & G)

TUBULARHANDLING

● Manual Handling Tools● Power Tongs● ST80 Spares● Slip Lifting Device

MUDSYSTEM

● Pulsation Dampeners● Mud Pumps spares● Mud Control● Instrumentation● Motors

PRESSURECONTROL

● Well Head Components● Annular Protector Cap● Pressure Test Stump● Pressure Test Safety Shield

SAFETY

● Hammer Union Wrench● Safety Flex Handles● Tong Die Drivers● Safety Make Up Stand● Tong Safety Handles● Fluid Containment Systems● Rig Floor Traction Matting

Page 3: PRODUCTS, SERVICES AND AGENCIES

IRE TRADING LLC Add: PO Box 283374 Dubai , UAE Tel : +971 4 884 8149 Fax: +971 4 884 8186 Emai l : in [email protected]

5000 PSI up to 15,000 PSI

2-3/8" up to 8-5/8"

IF, REG, VX, XT, HT, TT, DP, DS, FH, WT, EUE, LTC and many more

API Class 1 & Class 2 available

NACE (H2S Trim). FULL NACE (SS) also available

API 7-1. ABS & DNV also available

SPECIFICATIONS:Working Pressure

Thread sizes

Thread Connections

Class

H2S Service

Certification Body

DRILL STEM SAFETY VALVES (DSSV)

TOP DRIVE IBOPACTUATION SYSTEM

• We stock the Hi Kalibre Hydraulic Actuator + spares.

• Extensively used by Tesco, Bentec, Warrior and FDS.

• Next generation model now available and compatible with previously supported TDS plus Canrig.

• New design reduces downtime and improves performance.

Note: custom designs available upon request

FEATURES:

• IRE is the leading regional specialist when it comes to top drive IBOPs and actuators.

• We stock over $600k of products, including both OEM and aftermarket top drive IBOPs & spare parts

• OEM replacement IBOPs & Actuators for Tesco, Bentec, Cameron/Letourneau and Varco TDS

• Interchangeable alternatives for other top drive models

• Industry proven design for over 30 years

• Through our partnership with Hi Kalibre, we also offer OEM services including inspection and repairs

PRODUCTS:

► Top Drive IBOPs and Actuators

► Full Opening Safety Valves (FOSVs)

► Stab-in IBOPs (Gray valves)

► Drop-in Retrievable Check valves

DRILL STEM VALVES

w w w . i r e t r a d i n g . c o m

DRILL PIPE FLOAT VALVES

1-1/8" up to 8-5/8"

NACE (H2S Trim). FULL NACE (SS) also available

API 7-1

7500 PSI (Standard) / 10,000 PSI (HP)

350 C / 450 F

SPECIFICATIONS:Thread sizes

H2S Service

Certification Body

Max Pressure

Max Temp

FEATURES:

• Made in USA by Keystone Energy Tools

• Widely accepted by many major oil and service companies

• 100% Interchangeable with Baker style • Xtreme model also available for harsh drilling conditions

• IRE stocks in UAE all common sizes for standard and H2S along with repair kits for each

• Unique s/n and traceability for each individual valve

PRODUCTS:

► Type F

► Type FA

► Type FC

► Valve pullers

► Coil tubing float valves

► Type G

► Type GA

► Type GC

► Type GCA

► Baffle Plates

Page 4: PRODUCTS, SERVICES AND AGENCIES

IRE TRADING LLC Add: PO Box 283374 Dubai , UAE Tel : +971 4 884 8149 Fax: +971 4 884 8186 Emai l : in [email protected]

FEATURES:

• Manufactured by Keystone USA • API 8C & 7K Certified • Extensive stock available for short delivery times • Elevators made using high-alloy heat treated steel • Interchangeable with major OEMs like Varco & Forum

• Superior quality, pricing, and support

MANUAL HANDLING TOOLS PRODUCTS:

► Elevators (tubing, casing, drill pipe & slip type)

► Slips (tubing, casing & drill pipe)

► Kelco Style Tubing Tongs

► Safety Clamps

► Stabbing Guides

► Safety Flex Handles

► Tong Safety caps

► TS100 Bowl & Inserts

► Master Bushing & Bowls

► 2 & 4 Hook Chain Liting Slings

► Becket and Bails

► Dies & Inserts

► Tong line blocks

ST80 SPARE PARTS • 100% Interchangeable with OEM and Made in USA • Design upgrades which increase durability and operational performance compared to OEM parts

• Dies and Inserts are machined instead of cast • Extreme-torque model now available for heavy duty usage

TUBULAR HANDLING TOOLS

w w w . i r e t r a d i n g . c o m w w w . i r e t r a d i n g . c o m

SLIP LIFTING DEVICE • Designed to be used while tripping in or out of the hole to help reduce fatigue and prevent injuries

• Can be used with conventional rotary, drill collar or casing slips

• Pneumatic operated

• Pin drive or Square Drive

85 PSI

23.5" x 43.5" (600 MM x 1105 MM)

260 LBS (118 KG) SLD only525 LBS (238 KG) c/w stand, control valve, air supply plate and hoses

SPECIFICATIONS:Min. Operating Pressure

Base Dimensions

Weight

POWER TONGS PRODUCTS:

► Open mouth Power Tongs from 5-1/2" up to 24.5"

► Friction Bite unit for premium pipe

► Closed mouth unit 7" & 11-3/4"

► Hydraulic back ups

► Bucking unit

► Torque monitoring systems

► Hydrualic power unit (diesel or electric)

Max Torque

Size Range

Max RPM

CLOSE MOUTH 7"

13,000 ft/lbs

1-5/16" - 7"

135

TUBING

15,000 ft/lbs

2-1/16 - 5-1/2"

102

COMPACT

17,000 ft/lbs

2-1/16" - 7-5/8"

108

CASING 9-5/8"

27,000 ft/lbs

2-3/8 - 9-5/8"

41

CASING13"

36,000 ft/lbs

2-3/8 - 13-3/8"

37

CASING17"

41,000 ft/lbs

5-7/8" - 17"

31

CASING20"

50,000 ft/lbs

5-7/8" - 20"

27

CASING24"

56,000 ft/lbs

7-1/2" - 24.5"

23

SPECIFICATIONS:

FEATURES:

• Durable, reliable and low maintenance

• Simple to operate, maintain and repair• Modular Back up back up design which is interchangeable with competitors tongs• Lighter and more compact than the competition• Designed and built in Canada by Universe Machine Corporation

Page 5: PRODUCTS, SERVICES AND AGENCIES

IRE TRADING LLC Add: PO Box 283374 Dubai , UAE Tel : +971 4 884 8149 Fax: +971 4 884 8186 Emai l : in [email protected]

PULSATION DAMPENERS

FEATURES: • Gas Charged: designed as inter-changeable with the Hydril K20, but with added benefits

• ASME Section VIII Div. 1 U-STAMPED & 1/8” Corrosion Allowance Standard

• Maintanence-Free: NO ELASTOMERS, NO SPARES, NO GAS PRE-CHARGE, NO WORRIES

• Made in USA by Peformance Pulsation Control

• IRE stocks gas charged dampeners in Dubai along with range of spares

• Extensive stock in USA for quick shipments

PRODUCTS:

► Gas Charged Dampeners for Suction & Discharge

► Maintenance Free dampeners for Suction & Discharge

► Status Flow pulsation stabilizers for all pumping applications

► Spare parts for above

Discharge

5000 PSI & 7500 PSI

5 - 20 Gallon for gas charged80 - 240 gallon for maintenance free

4-1/16" 5000 PSI RTJ and;4-1/16" 7500 PSI RTJ

Nitrile (NBR), Hydrogenated Nitrile(HNBR), Urethane

ASME 1-UA. DNV & ABS also available upon request

Suction

150 PSI

300 - 4800 cubic inch

6" - 14" RF

Nitrile (NBR), Hydrogenated Nitrile(HNBR), EPDM, XR

SPECIFICATIONS:

Working Pressure

Size

Connection

Elastomer Material

Certification

Note: 316 SS and inconel inlay also available

SPARE PARTS LIST:

Discharge : Diaphragm, stabiliser, insert, charging valve, gauge, bolt & charging kits Suction : Cartdige assy, charging valve

Status flow : Cartdige assy & charging kits

MUD SYSTEM

w w w . i r e t r a d i n g . c o m

MUD PUMP SPARESPRODUCTS:

► Fluid End Spares Valves, Seats, Liners, Pistons, Rods, Clamps, Modules, Manifolds etc

► Power End Spares Bearings, Gears, Pinion Shafts, Crankshafts, Crossheads, Guides etc

FEATURES:

• 100% Interchangeable with brands like National, Gardener Denver, Emsco, Drillmec, Ideco etc • High Pressure & High Temperature options available • Wide range of stock available in GCC

• Industry proven, field tested and reliable

MUD CONTROL

PRODUCTS:

► Screw Conveyors

► Centrifual Pumps

► Mud Gate Valves

► Butterfly Valves

► Pop Off Valves

► Shakers and screens

► Agitators

► Mud guns

► Mud hoppers

• Pressure Gauges

• Pump stroke counters

• Pump monitoring systems

• AAC motors available for Mud Pump (see Hoisting & Rotary for more info)

INSTRUMENTATION

MOTORS

Page 6: PRODUCTS, SERVICES AND AGENCIES

IRE TRADING LLC Add: PO Box 283374 Dubai , UAE Tel : +971 4 884 8149 Fax: +971 4 884 8186 Emai l : in [email protected]

TOP DRIVE SPARES• Interchangeable with several major OEM's

• Manufactured by a certified engineering facility in USA

• Significant cost savings compared to major OEMs

• Fast lead times

• Superior service and after sales support

• Some products available ex works UAE

KELLY SPINNER • Available in single or dual direction • Powered by non-lube air motor with built in relay valves and mufflers • Mounted to bottom of swivel eliminating need for dangerous spinning chain • Driller can continue to turn rotary table while making a connection with spinner • Designed and built in Canada by Universe Machine Corporation

ROTATING MOUSEHOLE• Allow drilling crew to quickly and efficiently build stands simultaneously while drilling ahead with top drive

• Available in pneumatic or hydraulic • Installs flush with rig floor

• Rotates tubular below rig floor • Manufactured by API 8C certified company in USA

TYPE

AIR

TORQUEft lb (kg.m)

1050 (146)

WEIGHTLBS (KG)

750 (340)

POWERREQUIRMENTS

1-8 CFS / 90-150 PSI

SPEEDRPM

170

MODEL

06A

HOISTING & ROTARY

w w w . i r e t r a d i n g . c o m

MOTORS AND VFD'S • AC motors available for Drawworks, Rotary Table, Top Drive and Mud Pump • Single VFD up to 3600 HP • Designed and made in Germany by Breuer Motors (est. 1877) • Interchangeable footprint with many other brands • Grease cycle = 50,000 hrs: reduces downtime and maintenance • Supplies directly to OEMs such as Bentec, Tesco & Drillmec More Torque, More Reliable, Less Maintenance, Less Cost

OILFIELD ECOVERT® VFM(VARIABLE FREQUENCY MOTOR)• VFM combines motor and VFD through an innovative, compact design

• No need for power control room which can save end user significant time, space and money• Ideal for DC to AC upgrades • Harmonics reduced by eliminating the cable • Same footprint as regular motor • Customisable: VFD can be mounted above or on side

SHEAVES• OEM and Aftermarket sheaves for Travelling Blocks, Wireline and Crown Blocks

• Made in USA

• API 8A & 8C certified

• Save up to 75% vs buying from OEM

DEADLINE ANCHORS HERCULES DEADLINE ANCHORS

API Spec 8C and Monogram PSL 1 & 2 available

• Slickline Load Indicators

• Weight indicators • Torque gauges • Pressure Gauges • Industry proven design widely used since 1985

Made in USA Reliable and Cost effective

INSTRUMENTATION:

Page 7: PRODUCTS, SERVICES AND AGENCIES

IRE TRADING LLC Add: PO Box 283374 Dubai , UAE Tel : +971 4 884 8149 Fax: +971 4 884 8186 Emai l : in [email protected]

WELL HEAD COMPONENTSFEATURES:

• Locally Manufactured in UAE with stock on the ground • Experienced API 6A, 16C & 17D Machine Shop

PRODUCTS:

► Riser pipe

► DSA's

► Spools (Adaptor/ Drilling/ Spacer)

► API monogrammed flanges

► Studs/ Nuts/ Bolts

► Ring Gaskets

• Bell nipple and hoist slip table commonly cause damage to top connection of the annular

• Install our polyurethane cap on top ring groove of annular to prevent expensive and timely repairs• Endorsed by Cansco Well Control• Interface with standard API connections• Designed and built in Canada• Durable, no maintenance and re-usable

ANNULAR PROTECTOR CAP

SHEET 1 OF 1

DRAWN

CHECKEDAL

MS

04/01/2017

05/01/2017

DWG NO

Marketing_Req (Bell Nipple)

TITLE

Annular Cap Protection - Standard Bell Nipple

SIZE

A3SCALE

REV

0

CANSCO WELL CONTROL

Unless otherwise specified, all dimensions are in millimeter.

FEATURES:

• DSSV Test Stump allows for safe, quick and efficient testing of pressure control valves & subs on rig floor

• Testing DSSVs and pressure subs offline saves time and money, especially when installing new valve

• Internal PTFE O-ring allows for easy sealing

• Make & break by hand with chain tong

• Standard API approved BOP test stump design, built and manufactured in UAE

PRESSURE TEST STUMPPRODUCTS:

► Drill Stem Safety Valve (DSSV) Test Stump

► BOP Test Stump

PRESSURE CONTROL

w w w . i r e t r a d i n g . c o m

PRESSURE TEST SAFETY SHIELDFEATURES:

• Safety shield is installed around stand pipe manifold and the choke manifold to isolate while pressure testing

• Blast and frag proof material hangs from a frame and can be pulled open or closed like a curtain

• Allows rig floor operations to safely continue during pressure tests of manifolds

• Saves operator/contractors huge costs by increasing operational uptime

• Innovative concept provides competitive edge for drilling contractors bidding for contracts

• Tested and certified to protect against blast fragments and high velocity projectiles

• Independantly certified by Chesapeake, ASTM and UL. Approved by DNV, Total, Shell, BP, Transocean and Rowan

• Installed on over 30 rigs worldwide

DAILY RIG COST

HOURLY RIG COST

BOP TEST FREQUENCY

AVERAGE TEST TIME

ANNUAL LOST TIME

COST

$80,000

$3,333

EVERY 14 DAYS (26 PER ANNUM)

4 HOURS

104 HOURS

$346,632.00

LOST TIME/MONEY DUE TO TESTING

EST. SHIELD COST

SAVING IN 1 YEAR

SAVING IN 5 YEARS

ROI

$140,000

$206,632

$1,593,160

154 DAYS (11 TESTS)

COST SAVING AND ROI

Armourcore

BallisticsNylon

CoreMatrixCore

Matrix

Stops a bullet travelling at 1374 ft/sec from a .357 magnum

Page 8: PRODUCTS, SERVICES AND AGENCIES

IRE TRADING LLC Add: PO Box 283374 Dubai , UAE Tel : +971 4 884 8149 Fax: +971 4 884 8186 Emai l : in [email protected]

HAMMER UNION WRENCH• Innovative HUWE tool provides a safer, more practical alternative way to make and break your hammer union connection

• Eliminating the hammer substantially reduces hand and finger injuries

• HUWE® wrench sizes vary from 2” to 6” to cover most of the unions and pressure ratings used in the field

• Received safety and innovation award by Occidental in Oman

• Widely adopted across the world by majors such as Shell, Schlumberger and Halliburton

• Full range of stock available in GCC

• Economical: minimises hammer union damage and replacements

SAFETY FLEX HANDLES• Designed to reduce back injuries when picking up the slips • Added thumb guard prevents hand injuries

• Extreme Service model option for more durability and longer lifespan • Interchangeable for all major models of slips

• All pull tested prior to shipment

• GCC stock available

TONG SAFETY HANDLES/ BUMPERS • Provides hand and finger protection from working with manual tongs • Interchangeable with OEM

• Also offer ST-80 Bumpers

SAFETY MAKEUP STAND• Used to support stabilizers, subs and other drilling tools during bottom hole make-up • Located on side of rotary table • Rated to 10,000 lbs (spring 3000 lbs)

SAFETY

w w w . i r e t r a d i n g . c o m

TONG DIE DRIVER • Made in USA

• Replaceable die slots to extend life of tool

• Available in two head sizes: 1" and 1-1/4"

• Ex Stock GCC

• Innovative hammerless model minimises common injuries caused by hammering seized dies

FLUID CONTAINMENT SYSTEMS• Capture drilling fluid and mud under the rig floor to reduce environmental exposure and contamination • Keeps the cellar clean • Prevents mud and fluid wastage • Doesn’t interfere with tooling or travelling in/out the hole • Zero leak design • No seals required • Quick and easy installation • Drip trays and line containment trays also available

RIG FLOOR TRACTION MATTING• Two component custom blend of polyol polyurethane with embedded traction surface to withstand invert and other fluids encountered during drilling • Colour identification on danger zones • Easy to install • Extremely durable and resistant to fluids • Customised print/text available • Invert splash rings also available • Tubing stabbing mat and tray also available • Drill pipe racking mats also available • Roll up traction matting also available

• Composite grating also available

Page 9: PRODUCTS, SERVICES AND AGENCIES

www.iretrading.com

SERVICES AND AGENCIESWe provide the following services:

VALVE INSPECTION AND TESTING

We are the OEM authorized service agent for Hi Kalibre in MENA region. We offer full OEM inspection, redress and pressure testing for all Hi Kalibre valvesand actuators. We also service valves from other manufacturers.

MAKE UPS / BREAK OUTS

Our in-house torque machine has a max make up of 160,000 ft/lbs and max break out of 200,000 ft/lbs which allows us to handle high torque connections.

MAGNETIC PARTICLE INSPECTIONS

Our experienced technicians are certified to Level II for MPI/LPI. We also offer acid immersion tank facility for tool cleaning.

IRE represents several manufacturers including:

DSSV Test Stump (UK)

Pulsation Dampeners (USA)Safety Valves and Actuators (Canada) Handling Tools and Float valves (USA)

Hammer Union Wrench (Canada)

www.huwewrench.com

Power Tongs (Canada)

www.umcorp.comwww.kes-eng.com

www.pulsat ioncontrol .comwww.hikal ibre.com www.keystoneenergytools.com

Page 10: PRODUCTS, SERVICES AND AGENCIES

PRODUCTS, SERVICESAND AGENCIES

IRE TRADING LLC

Add: PO Box 283374 Dubai, UAETel: +971 4 884 8149Fax: +971 4 884 8186Email: [email protected]

www.iretrading.com

admin
Typewritten text
ISO-4687
admin
Typewritten text
Q1-3265