Installed before relief valves, atmospheric valves, hydraulic control valves as well as other equipments, strainers serve to filter out the impurities in the flow medium for protection of valves and equipments in the piping system.

1. Material: Ductile Iron ASTM A536, 65-45-12Valve body and cover are produced in ductile iron material which provides guarantee for high strength and good corrosion resistance.2. Different Options of Screen Mesh SpecificationDifferent options of screen mesh specification available as per different service conditions. 3. Fusion Bonded Epoxy Coating Fusion bonded epoxy coating in accordance with ANSI/AWWA C550 for both interior and exterior surface which provides reliable corrosion resistance.

• Statement:

• Features:

• Statement:

• Features:

Y-Ty pe Strainer

Products Introduction

American Valves

• Ductile Iron Body & Bonnet• Stainless Steel Screen • Fusion Bonded Epoxy Coating • Gasket: EPDM or Graphite + Acanthopore Plate

KINGER INDUSTRY INC.

Part No. Part Standard Specification Options

1 Valve Body ASTM A536, 65-45-12

2 Screen AISI 304 (Perforated)AISI 304, AISI 316 (Perforated, Knitted, Double Screen)

3 Gasket EPDM Graphite + Acanthopore Plate

4 Bonnet ASTM A536, 65-45-12

5 Plug Malleable Iron Galvanized Bronze ASTM B584

6 Bolt Carbon Steel Zinc Plated AISI 304, AISI 316

7 Flat Washer Carbon Steel Zinc Plated AISI 304, AISI 316

• Connection Ends: Flange to ASME B16.1 CL 125

• Working Pressure: 300PSI 200PSI and 250PSI available upon request

• Temperature Range: 0℃- 80℃ rubber gasket, -10℃- 350℃ graphite gasket

• Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550

JMV4MATERIAL SPECIFICATION

STANDARD SCREEN

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm

2'' 50 7.87 200 5.98 152 4.74 120.5 0.63 16 4--0.75 4-Φ19.1 6.10 155

2.5" 65 10.00 254 7.01 178 5.49 139.5 0.69 17.5 4--0.75 4-Φ19.1 6.50 165

3" 80 10.12 257 7.52 191 6.00 152.5 0.75 19 4--0.75 4-Φ19.1 7.09 180

4" 100 12.13 308 9.02 229 7.50 190.5 0.94 24 8--0.75 8-Φ19.1 9.02 229

5" 125 15.63 397 10.00 254 8.50 216 0.94 24 8--0.88 8-Φ22.2 11.22 285

6" 150 18.50 470 10.98 279 9.51 241.5 1.00 25.5 8--0.88 8-Φ22.2 12.24 311

8" 200 21.61 549 13.50 343 11.75 298.5 1.12 28.5 8--0.88 8-Φ22.2 15.51 394

10" 250 25.75 654 15.98 406 14.25 362 1.20 30.5 12--1 12-Φ25.4 19.17 487

12" 300 29.88 759 19.02 483 17.01 432 1.26 32 12--1 12-Φ25.4 21.54 547

DN Dimensions(Inch/mm)

L D D1 b N-ΦL H

Inch mm Inch mm

2''-2.5" 50-65 25 0.16 4 48

3"-4" 80-100 19 0.20 5 59

5" 125 14 0.24 6 63

6"-12" 150-300 13 0.25 6.3 64

DN Sieve No.

Hole DiaFree Flow Area(%)

Flanged Y-Type Strainer (JMV4),

UL Listed

Grooved Y-Type Strainer (JMV8),

UL Listed

• Connection Ends: Groove to AWWA C606

• Working Pressure: 300PSI 200PSI and 250PSI available upon request

• Temperature Range: 0℃- 80℃

• Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550 or painting upon request

Part No. Part Standard Specification Options

1 Valve Body ASTM A536, 65-45-12

2 Screen AISI 304 AISI 316

3 Rigid Coupling ASTM A536, 65-45-12

4 Cap ASTM A536, 65-45-12

5 Plug Malleable Iron Galvanized Bronze ASTM B584

MATERIAL SPECIFICATION

STANDARD SCREEN

JMV8

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

American Valves

Inch mm Inch mm

2''-2.5" 50-65 25 0.16 4 48

3"-4" 80-100 18 0.20 5 53

5" 125 13 0.24 6 58

6"-12" 150-300 12 0.25 6.3 56

DN Sieve No.

Hole DiaFree Flow Area(%)

Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm

2'' 50 9.74 247.5 2.37 60.3 2.25 57.15 0.63 15.88 0.31 7.92

2.5" 65 10.75 273 2.87 73 2.72 69.09 0.63 15.88 0.31 7.92

3" 80 11.75 298.5 3.50 88.9 3.34 84.94 0.63 15.88 0.31 7.92

4" 100 14.25 362 4.50 114.3 4.33 110.08 0.63 15.88 0.37 9.52

5" 125 16.50 419 5.56 141.3 5.39 137.03 0.63 15.88 0.37 9.52

6" 150 18.50 470 6.63 168.3 6.46 163.96 0.63 15.88 0.37 9.52

8" 200 24.00 609.5 8.63 219.1 8.44 214.4 0.75 19.05 0.44 11.13

10" 250 27.01 686 10.75 273 10.56 268.28 0.75 19.05 0.50 12.7

12" 300 30.00 762 12.75 323.9 12.53 318.29 0.75 19.05 0.50 12.7

DN Dimensions(Inch/mm)

L OD d A B

GE

IN KIN R INDUSTRY C

J MV1

• Connection Ends: Thread to ANSI/ASME B1.20.1

• Working Pressure: 400PSI @-29 to 66 250PSI @208

• Coating: Painting

Part No. Part Standard Specification Options

1 Valve Body ASTM A536, 65-45-12

2 Screen AISI 304 AISI 316

3 Sealing Washer Graphite + Acanthopore Plate PTFE

4 Cover ASTM A536, 65-45-12

5 Plug Malleable Iron Galvanized

MATERIAL SPECIFICATION

Threaded Y-Type Strainer (JMV1)

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

JMV1

Inch mm Inch mm Inch mm Inch mm Inch mm

1/4'' 8 3.19 81 2.17 55 1/4'' 0.09 2.4 0.09 2.4

3/8'' 10 3.19 81 2.24 57 1/4'' 0.10 2.5 0.10 2.5

1/2'' 15 3.19 81 2.76 70 3/8'' 0.10 2.54 0.10 2.54

3/4'' 20 3.74 95 2.83 72 3/8'' 0.12 3 0.12 3

1'' 25 4.02 102 3.07 78 1/2'' 0.16 4.06 0.16 4.06

1 1/4'' 32 5.00 127 3.62 92 1/2'' 0.19 4.83 0.19 4.83

1 1/2'' 40 5.75 146 4.65 118 1/2'' 0.19 4.83 0.19 4.83

2'' 50 6.97 177 4.72 120 1/2'' 0.22 5.59 0.22 5.59

2 1/2" 65 9.21 234 5.35 136 3/4'' 0.22 5.59 0.22 5.59

3" 80 10.00 254 5.91 150 3/4'' 0.22 5.59 0.22 5.59

DN Dimensions(Inch/mm)

A B(max)Plug

t t1

KINGER INDUSTRY INC.

Landing Valve(JMSN)

• Thread: ISO 7-1

• Working Pressure: 300PSI 200PSI and 250PSI available upon request

• Temperature Range: 0℃ - 80℃

• Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550

MATERIAL SPECIFICATION

Part No. Part Standard Specification

1 Body ASTM A536, 65-45-12

2 Disc ASTM A536, 65-45-12

3 Steel Ball AISI 304

4 Inner Hex Screw AISI 304

5 Stem AISI 420

6 O-Ring NBR

7 Bonnet ASTM A536, 65-45-12

8 O-Ring NBR

9 Handwheel ABS

10 Screw AISI 304

JMSN

d1(Rc) D(R )

Inch mm Inch mm Inch mm Inch mm Inch Inch mm Inch

2'' 50 2.26 57.5 4.31 109.5 2.48 63 2 1.75 44.5 2

2.5" 65 2.80 71 4.30 109.3 2.80 71 2 1/2 2.28 58 2 1/2

DN H1 H2 L d2

Dimensions(Inch/mm)

MATERIAL SPECIFICATION

Water Flow Indicator (JMZSJZ)

JMZSJZ

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

Part No. Part Standard Specification Options

1 Body ASTM A536, 65-45-12

2 Bolt Carbon Steel Zinc Plated SS304, SS316

3 Lodicule Plastic

4 Nut Carbon Steel Zinc Plated SS304, SS316

5 Gasket EPDM NBR

• Connection Ends: AWWA C606

• Working Pressure: 300PSI 200PSI and 250PSI available upon request

• Temperature Range: 0℃ - 80℃

• Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550

American Valves

Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm

2'' 50 2.37 60.3 2.44 62 1.89 48 1.42 36 4.72 120

2.5" 65 2.87 73 2.44 62 1.89 48 1.22 31 5.12 130

3" 80 3.50 88.9 2.44 62 1.89 48 1.44 36.5 5.71 145

4" 100 4.50 114.3 2.44 62 1.89 48 1.20 30.5 7.28 185

5" 125 5.56 141.3 2.44 62 1.89 48 1.44 36.5 8.72 221.5

6" 150 6.63 168.3 2.44 62 1.89 48 1.30 33 10.00 254

8" 200 8.63 219.1 2.44 62 1.89 48 1.44 36.5 11.81 300

DN Dimensions(Inch/mm)

R A B C D