PRODUCT RANGES - taichema.lt fileKRISTAL COATINGS. A CLEAR STORY! ... In center of our product...
Transcript of PRODUCT RANGES - taichema.lt fileKRISTAL COATINGS. A CLEAR STORY! ... In center of our product...
WINNER
PR
OD
UC
T R
AN
GES
WWW.KRISTALCOATINGS.COM
WELCOME TO KRISTAL COATINGS.A CLEAR STORY!
Since its establishment in 2006 Kristal Coatings focuses on the development of
innovative quality products for the latest generation of lacquer users. Cost savings
generated by a lower energy usage and timesaving are a key core in this process.
Our fast air drying clear coat is awarded with the Innovation Award during the
Automechanika in Frankfurt. And our waterborne AquaGreen-range is nominated
for the Green Directory at the same international trade fair.
Our product assortment consists out of a complete color system, surfacers and
clear coats, which virtually can immediately be integrated in your company.
In this brochure you will find a clear description of our products. You will find
multiple product ranges. In center of our product ranges is our color system
with which you have access to over 50.000 colors. This basecoat can be
finished with all KRISTAL clear coats, from HS to Univeral TimeClear.
We are confident that with our products you will find and keep linkage
with the latest generation who by using smart products saves on energy
and time.
KRISTAL AquaGreen P. 6-9
KRISTAL AquaGreen WB P. 10-13
KRISTAL TIME P. 14-17
KRISTAL UV Surfacer P. 18-19
KRISTAL eXcellent UHS P. 20-25
KRISTAL PLUS HS P. 26-35
KRISTAL Fillers P. 36-37
ZENITH P. 38-43
55WWW.KRISTALCOATINGS.COM
KRISTAL AquaGreen
KR
IST
AL
AQ
UA
GR
EE
NFOR TOP 25NOMINATED
KRISTAL AQUAGREEN
CLEAR
KRISTAL AquaGreen is the waterborne product range of
Kristal Coatings. An innovative, environmentally friendly
and latest range of Kristal Coatings. KRISTAL AquaGreen
offers products with excellent premium quality and curing
properties, which even can be compared to solvent-
based products. Without saying the products of KRISTAL
AquaGreen are VOC compliant according the latest
directive. KRISTAL AquaGreen is environmentally friendly
and health conscious towards end-users.
KRISTAL AQUAGREEN CLEAR
KRISTAL AquaGreen Clear is the waterborne and latest
Clear Coat developed by Kristal Coatings. KRISTAL
AquaGreen Clear needs to be cured for 30 minutes at
60°C, which is fast for waterborne and comparable to
solvent-based Clear Coats. KRISTAL AquaGreen Clear
contains very little solvents and therefore a low VOC
value, KRISTAL AquaGreen Clear contains <200 g/L.
VOC. Also due the low VOC value only a little part of
the product evaporates and creates a higher coverage
per m² together with a higher durability of the Clear
Coat. KRISTAL AquaGreen Clear has a durability of 8-10
years.
KRISTAL AQUAGREEN SURFACER
KRISTAL AquaGreen Surfacer is the
waterborne and latest Surfacer developed
by Kristal Coatings. KRISTAL AquaGreen
Surfacer fully cures at 60°C with a cycle
of 30 minutes. KRISTAL AquaGreen has
KRISTAL AquaGreen Clear is selected by Messe Frankfurt as top 25 product for the
Automechanika Green Directory 2012.
a very low VOC level, it contains <200
g/L. VOC. KRISTAL AquaGreen has
excellent sandability together with high
filling properties. Without saying KRISTAL
AquaGreen Surfacer complies with the
KRISTAL AquaGreen WB basecoat serie.
6 77WWW.KRISTALCOATINGS.COM WWW.KRISTALCOATINGS.COM
KRISTAL AquaGreen Surfacer
Mixing ratio4:1 with KRISTAL AquaGreen Surfacer Hardener Add up to 20-25% KRISTAL AquaGreen CS-Add
Equipment set-up1.4 – 1.7 mm spray nozzle2.0 – 2.2 bar at the air inlet
Spray coats & layer thickness
2 spray coats60 – 100 µm
Flash-off 10 – 15 minutes between the layers
Drying 30 – 40 minutes at 60°C
Application viscosity 27 – 30 seconds (DIN cup 4 mm / 20°C)
Application temperature 18°C – 30°C
Potlife 3 hours at 25°C
Available in 3,5 liter packaging
PROPERTIES∞ Waterborne product
∞ Excellent sanding
∞ High filling properties
∞ Environment friendly
Available in 5 liter packaging
PROPERTIES∞ Waterborne product
∞ Fast curing – comparable
with conventional
products
∞ Low VOC content
∞ Environment friendly
∞ Long durability
KRISTAL AQUAGREENSURFACER Article number: 2127
Available in 1 liter packaging
KRISTAL AQUAGREENSURFACER HARDENER
KRISTAL AQUAGREENCLEAR Article number: 4210
KRISTAL AQUAGREENCLEAR HARDENER Article number: 7210
Article number: 7127
Available in 1 liter packaging
KRISTAL AQUAGREENCS-ADD Article number: 6110
Available in 1 liter packaging
KR
IST
AL
AQ
UA
GR
EE
N
KRISTAL AquaGreen Clear
Mixing ratio3:1 with KRISTAL AquaGreen Clear Hardener Add up to 20-25% KRISTAL AquaGreen CS-Add
Equipment set-up1.2 – 1.4 mm spray nozzle2.0 – 2.2 bar at the air inlet
Spray coats & layer thickness
2 spray coats50 – 60 µm
Flash-off 5 – 10 minutes between the layers
Drying 30 – 40 minutes at 60°C
Application viscosity 22 – 26 seconds (DIN cup 4 mm / 20°C)
Application temperature 20°C – 25°C
Potlife 4 hours at 25°C
8 99WWW.KRISTALCOATINGS.COM WWW.KRISTALCOATINGS.COM
SOLID COLORS
Solid colors are manufactured by employing the latest
technology which provides high chroma from pigments,
maximises color fastness & durability, and ensures a deep
lustrous color base.
METALLICS
Metallics give exacting color matches to modern effect
paint finishes through the design of their tiny silver bronze
& gold metallic platelets.
PEARLESCENTS
Pearlescents are specially designed to maximise the
shimmering effects of light refraction. The full pearlescent
effect comes shining through from unrefracted light de-
pending on the angle it strikes the surface.
XIRALLICS
Xirallics are the latest developments in extreme color inten-
siveness. They include tiny aluminium flakes which enhan-
ce the brilliant colors with a sparkling glitter finish.
KRISTAL AquaGreen WB
KR
IST
AL
AQ
UA
GR
EE
N W
B
PROPERTIES1 x Pearlescent
7 x Xirallics
5 x Reduced Colors
PROPERTIES29 x solid colors
5 x metallics
2 x additives
15 x pearlescents
KRISTAL AQUAGREEN WBBASE
KRISTAL AQUAGREEN WBBASE
KRISTAL AQUAGREEN WBTHINNER FOR WATERBORNE Article number: 1050
Available in 5 and 1 liter packaging
Available in 0,5 liter packaging
Available in 1 liter packaging
KRISTAL AquaGreen WB
Mixing ratio100:30 with KRISTAL AquaGreen WB Thinner for Waterborne
Equipment set-up1.2 – 1.4 mm spray nozzle1.7 – 2.2 bar at the air inlet
Spray coats & layer thickness
SOLIDS: 2 spray coatsMETALLICS, PEARLESCENTS & XIRALLICS: closed coat, light coat, mist coat (mist coat: same pressure, double distance, angle of 45°)
Flash-off 5 – 10 minutes between the layers
Drying See TDS
Application viscosity 30 – 32 seconds (DIN cup 4 mm / 20°C)
Application temperature 15°C – 30°C
Potlife 1 month
KRISTAL AquaGreen WB is the waterborne basecoat color
system of Kristal Coatings. With a range of 64 tinters and 1
thinner KRISTAL AquaGreen WB has complying formulation
in excess of 50.000+ colors, together with an updated color
mixing software for excellent matching. KRISTAL AquaGreen
WB is divided in the following subcategories.
10 1111WWW.KRISTALCOATINGS.COM WWW.KRISTALCOATINGS.COM
CABINET FOR WATERBORNEArticle number: KC-CAB
KRISTAL AQUAGREEN WB COLOR SWATCH SETArticle number: KC-CSS
DOSING LID FOR 1/0,5L
SARTORIUS WEIGHING SCALE
Article number: KC-S35
Article number: KC-SCALE
KERN WEIGHING SCALEArticle number: KC-KERN
KR
IST
AL
AQ
UA
GR
EE
N W
B
12 1313WWW.KRISTALCOATINGS.COM WWW.KRISTALCOATINGS.COM
KRISTAL UNIVERSAL TIMECLEAR
As the name suggests this air-drying products
can be used universal – for small to large spray
jobs. KRISTAL Universal TimeClear fully cures at
only 20°C. For urgent spray jobs this clear coat
obviously can be cured with infra-red or by
heating the spray booth. The application
of KRISTAL Universal TimeClear is equal to
conventional clear coats. KRISTAL Universal
TimeClear has a high gloss finish and overall fast
curing – with 20°C you can assemble the car
after 2,5 hours. In addition, KRISTAL Universal
TimeClear has a lower product usage.
The KRISTAL TIME technology is also awarded with the prestigious Automechanika
Innovation Award 2010
KR
IST
AL
TIM
EKRISTAL TIME
KRISTAL TIME®
AWARD WINNER!
The KRISTAL TIME product range is the most innovative
product line of Kristal Coatings. The name “TIME” says
it all, the main focus is time (-saving) and cost saving
without any concessions to the quality of the product.
All the products of KRISTAL TIME fully cure at only 20°C.
Although the low curing temperature KRISTAL TIME still
has fast drying properties.
KRISTAL UNIVERSAL TIMESURFACER
KRISTAL Universal TimeSurfacer is the air-curing Primer-Surfacer of the KRISTAL TIME
product range. KRISTAL Universal TimeSurfacer is a fast air-drying grey colored
Primer-Surfacer. At only 20°C this product is sandable after 20 minutes, purely with air
drying – IR-curing is with KRISTAL Universal TimeSurfacer not required. The product
has easy application properties, the required film thickness is achieved by a 2-layer
application with a flash-off time of 2 to 3 minutes.
14 1515WWW.KRISTALCOATINGS.COM WWW.KRISTALCOATINGS.COM
Available in 1 liter packaging
KRISTAL UNIVERSALTIMEADD STD Article number: 3455
KRISTAL UNIVERSALTIMECLEAR Article number: 9455
Available in 4 and 1 liter packaging
KRISTAL UNIVERSALTIMEHARDENER Article number: 8455
Available in 1 and 0,25 liter packaging
Available in 1 and 0,25 liter packaging
Available in 1 liter packaging K
RIS
TA
L T
IME
HARDENER Article number: 8540
GREY Article number: 5457
PROPERTIES• Air-drying / 20°C
• Fast curing
• Good filling
• Time- and energy savings
• Environment conscious product
ADD Article number: 3541
KRISTAL Universal TimeClear
Mixing ratio4:1:1 with KRISTAL Universal TimeHardener & KRISTAL Universal TimeAdd
Equipment set-up1.2 – 1.3 mm spray nozzle2.0 – 2.2 bar at the air inlet
Spray coats & layer thickness
2 spray coats50 – 60 µm
Flash-off 3 – 5 minutes between the layers
Drying 20°C (see TDS)
Application viscosity 15 – 16 seconds (DIN cup 4 mm / 20°C)
Application temperature 18°C – 25°C
Potlife 80 minutes at 20°C
KRISTAL Universal TimeSurfacer
Mixing ratio3:1:1 with KRISTAL Universal TimeSurfacer Hardener & KRISTAL Universal TimeSurfacer Add Fast
Equipment set-up1.3 – 1.5 mm spray nozzle1.8 – 2.2 bar at the air inlet
Spray coats & layer thickness
1 – 2 spray nozzle50 – 60 µm (dry) 90 – 110 µm (wet)
Flash-off 2 – 3 minutes between the layers
Drying 20°C (see TDS)
Application viscosity 14 – 16 seconds (DIN cup 4 mm / 20°C)
Application temperature 20°C – 30°C
Potlife 20 – 25 minutes at 20°C
PROPERTIES• Air-drying / 20°C
• Easy application
• High gloss finish
• Excellent curing properties
• After 2,5 hours dry to assemble
• Time- and energy savings
• Environment conscious
product
Available in 3 liter packaging
KRISTAL UNIVERSAL TIMESURFACER
KRISTAL UNIVERSAL TIMESURFACER KRISTAL UNIVERSAL TIMESURFACER
16 1717WWW.KRISTALCOATINGS.COM WWW.KRISTALCOATINGS.COM
KR
IST
AL
UV
SU
RFA
CE
R
KRISTAL UV Surfacer
KRISTAL 1K UV
Available in 1 liter packaging
SURFACER Article number: 5810
KRISTAL 1K UV Surfacer
Mixing ratio Ready for use
Equipment set-up1.2 – 1.3 mm spray nozzle1.8 – 2.2 bar at the air inlet
Spray coats & layer thickness
1 – 2 spray coats60 – 100 µm
Flash-off2 – 4 minutes between the layers4 – 6 minutes before for UV curing
Drying 5 minutes with 400w UV-A lamp
Application viscosity 16 – 18 seconds (DIN cup 4 mm / 20°C)
Application temperature 18°C – 28°C
Potlife n.a.
PROPERTIES• Fast curing, only 5 min / 400w UV• Timesaving – both in preparation and application• 1K product, thus ready for use• No waste material• No potlife• Low curing costs• Grey-colored surfacer• High filling
The KRISTAL 1K UV Surfacer is an advanced product in both
coverage- and filling properties, furthermore the product
is grey-colored. KRISTAL 1K UV Surfacer contains metallic
parts, due to this metallic parts UV curing can be applied
in combination with full covering layers. The curing of
KRISTAL 1K UV Surfacer is just 5 minutes with a 400w UV-A
lamp. You will save time in both preparation and application
activities with KRISTAL 1K UV Surfacer
18WWW.KRISTALCOATINGS.COM 1919WWW.KRISTALCOATINGS.COM
KRISTAL eXcellent UHS
KR
IST
AL
EX
CE
LLE
NT
UH
SKRISTAL UHS CLEAR COAT 93 2:1CLEAR Article number: 9310
KRISTAL UHS CLEAR COAT 93 2:1MATT/SEMIGLOSS Article number: 9310 M, 9310 ZG
Available in 5 and 1 liter packaging Available in 1 liter packaging
KRISTAL UHS Clear Coat 93
Mixing ratio2:1 with KRISTAL HS Hardener 83Add up to 10% KRISTAL 2K PU ULTRA Thinner
Equipment set-up1.2 – 1.3 mm spray nozzle2.0 – 2.2 bar at the air inlet
Spray coats & layer thickness
1¼ – 1½ spray nozzle50 – 70 µm
Flash-off5 – 10 minutes between the layers5 – 10 minutes after the last spray coat
Drying 15 – 40 minutes at 60°C (see TDS)
Application viscosity 17 – 19 seconds (DIN cup 4 mm / 20°C)
Application temperature 18°C – 30°C
Potlife 4 hours at 25°C
KRISTAL UHS Clear Coat 93 MATT / SEMI-GLOSS
Mixing ratio2:1 with KRISTAL HS Hardener 83 FastAdd up to 10% KRISTAL 2K PU ULTRA Thinner
Equipment set-up1.2 – 1.3 mm spray nozzle2.0 – 2.2 bar at the air inlet
Spray coats & layer thickness
1¼ – 1½ spray coats50 – 70 µm
Flash-off5 – 10 minutes between the layers5 – 10 minutes after the last spray coat
Drying 15 – 40 minutes at 60°C (see TDS)
Application viscosity 17 – 19 seconds (DIN cup 4 mm / 20°C)
Application temperature 18°C – 30°C
Potlife 4 hours at 25°C
The KRISTAL eXcellent UHS product range is an assortment
of conventional, but nevertheless innovative, products.
Together with the low VOC contents of the products, it is
also an environment conscious product line. The products
within the KRISTAL eXcellent UHS range are high-quality
Ultra High Solid products. The products are innovative and
renewing, with the KRISTAL UHS Clear Coat 93 (9310) we
were one of the first coating manufacturers worldwide to
introduce an 1-layer Clear Coat.
KRISTAL UHS CLEAR COAT 93
KRISTAL UHS Clear Coat 93 is an Ultra High Solid Clear
Coat with which an 1-layer application is sufficient to
achieve the required layer thickness. Together with a VOC
value of max. 418 g/L, KRISTAL UHS Clear Coat 93 is VOC
compliant according the latest EU directive 2004/42/EC.
Furthermore this Clear Coat has an easy application
method which results in an outstanding gloss level of
premium quality. Kristal Coatings offers also Semi-Gloss
and Matt variants of this Clear Coat.
KRISTAL UHS SURFACER 53
KRISTAL UHS Surfacer 53 is a high-filling, excellent
sandable 2-pack Ultra High Solid Primer-Surfacer. As to
our philosophy KRISTAL UHS Surfacer 53 is easy-to-use,
besides regular application this Surfacer can be also be
sprayed wet-in-wet. KRISTAL UHS Surfacer 53 is available in
4 different colours, being Black, Dark Grey, Grey and White.
Furthermore this Surfacer is VOC Compliant according EU
directive 2004/42/EC.
PROPERTIES• 1-layer clear coat
• High gloss finish
• Ultra High Solid product
• VOC Compliant
• Easy application
• Excellent clearness
PROPERTIES• Matt and Semi-Gloss variant
of 9310
• 1-layer clear coat
• Ultra High Solid product
• VOC Complaint
• Easy application
20 2121WWW.KRISTALCOATINGS.COM WWW.KRISTALCOATINGS.COM
KRISTAL UHS SURFACER 53 5:1GREY Article number: 5327
KRISTAL UHS SURFACER 53 5:1DARK GREY Article number: 5326
KRISTAL UHS SURFACER 53 5:1BLACK Article number: 5325
PROPERTIES• Grey Surfacer
• Ultra High Solid product
• High filling properties
• Excellent anti-corrosive
• VOC Compliant
PROPERTIES• Black Surfacer
• Ultra High Solid product
• High filling properties
• Excellent anti-corrosive
• VOC Compliant
Available in 3,5 and 1 liter packaging
Available in 3,5 and 1 liter packaging
PROPERTIES• Dark Grey Surfacer
• Ultra High Solid product
• High filling properties
• Excellent anti-corrosive
• VOC Compliant
Verkrijgbaar in 3,5 en 1 liter verpakking
KR
IST
AL
EX
CE
LLE
NT
UH
S
KRISTAL UHS SURFACER 53 5:1WHITE Article number: 5329
KRISTAL HS HARDENER 83STD Article number: 8310
KRISTAL HS HARDENER 83FAST Article number: 8311
KRISTAL UHS Surfacer 53
Mixing ratio5:1 with KRISTAL HS Hardener 83 FastAdd up to 15% KRISTAL 2K PU ULTRA Thinner
Equipment set-up1.4 – 1.8 mm spray nozzle1.8 – 2.2 bar at the air inlet
Spray coats & layer thickness
1 – 3 spray coats60 – 180 µm
Flash-off 5 – 10 minutes between the layers
Drying 30 minutes at 60°C (see TDS)
Application viscosity 17 – 19 seconds (DIN cup 4 mm / 20°C)
Application temperature 18°C – 30°C
Potlife 90 – 120 minutes at 20°C
KRISTAL HS HARDENER 83SLOW Article number: 8312
Available in 5 and 1 liter packaging
Available in 5 and 1 liter packaging
Available in 5 and 1 liter packaging
PROPERTIES• White Surfacer
• Ultra High Solid product
• High filling properties
• Excellent anti-corrosive
• VOC Compliant
Available in 3,5 and 1 liter packaging
22 2323WWW.KRISTALCOATINGS.COM WWW.KRISTALCOATINGS.COM
KRISTAL 2K PU ULTRA THINNER KRISTAL 2K PU ULTRA THINNERSTD SLOWArticle number: 3130 Article number: 3132
KR
IST
AL
EX
CE
LLE
NT
UH
S
KRISTAL 2K PU ULTRA THINNERFAST Article number: 3131
KRISTAL 2K DRYING BOOSTERArticle number: 3121
Available in 1 liter packaging
Available in 5 and 1 liter packaging
Available in 5 and 1 liter packaging
Available in 5 and 1 liter packaging
24 2525WWW.KRISTALCOATINGS.COM WWW.KRISTALCOATINGS.COM
KRISTAL PLUS HS
KR
IST
AL
PLU
S H
S
The KRISTAL PLUS HS product line is an assortment of
conventional products. The KRISTAL HS Clear Coat 92 PLUS
is an ‘standard’ product, all coating manufacturers offer a
similar HS product. The products are very easy to use, the
sprayer can not go wrong with PLUS. The products within
the KRISTAL PLUS HS product line are high-quality High Solid
products.
KRISTAL HS CLEAR COAT 92 PLUS
KRISTAL HS Clear Coat 92 PLUS
is a conventional high-quality,
non-yellowing High Solid Clear
Coat which is very easy to use.
You cannot go wrong with this
Clear Coat. The easy application is
through 2 layers which results in
a premium quality gloss together
with a high chemical resistance. In
combination with the KRISTAL HS
Hardeners 50° LT PLUS costs can
be saved on heating by curing at
50°C. KRISTAL HS Clear Coat 92
PLUS is VOC compliant according
EU directive 2004/42/EC.
KRISTAL HS SURFACER 52 PLUS
KRISTAL HS Surfacer 52 PLUS is the
Primer-Surfacer within the KRISTAL PLUS HS
product range, a high-quality, easy to use,
high filling, 2-component Primer-Surfacer
with premium results. Also together with
the KRISTAL HS Hardeners 50° LT PLUS this
surfacer can be fully cured at 50°C. KRISTAL
HS Surfacer 52 PLUS can be applied wet-
in-wet and is VOC Compliant according the
latest EU directive. KRISTAL HS Surfacer 52
PLUS is available is 4 different colors, being
Black, Dark Grey, Grey and White. KRISTAL
HS Surfacer 52 PLUS is VOC compliant
according EU directive 2004/42/EC.
26 2727WWW.KRISTALCOATINGS.COM WWW.KRISTALCOATINGS.COM
Available in 5 and 1 liter packaging
KRISTAL HS HARDENER 82 PLUSEXTRA FAST Article number: 8214
KR
IST
AL
PLU
S H
S
KRISTAL HS HARDENER 82 PLUSSLOW Article number: 8212
KRISTAL HS HARDENER 82 PLUSArticle number: 8210
Available in 5 and 1 liter packaging
Available in 5 and 1 liter packaging
Available in 1 liter packaging
STD
KRISTAL HS HARDENER 82 PLUSFAST Article number: 8211
KRISTAL HS CLEAR COAT 92 PLUS 2:1CLEAR Article number: 9210
PROPERTIES• Premium quality clear coat
• Very easy application
• High gloss finish
• Also curing at 50°C
• VOC Compliant
Available in 5 and 1 liter packaging
KRISTAL HS Clear Coat 92 PLUS
Mixing ratio2:1 with KRISTAL HS Hardener 82 PLUS / KRISTAL HS Hardener 50° LT PLUSAdd up to 10% KRISTAL 2K PU Thinner PLUS
Equipment set-up1.2 – 1.4 mm spray nozzle2.0 – 2.2 bar at the air inlet
Spray coats & layer thickness
2 spray coats50 – 70 µm
Flash-off 5 – 10 minutes between the layers
Drying15 – 40 minutes at 60°C (see TDS)15 – 30 minutes at 50°C (see TDS)
Application viscosity 17 – 19 seconden (DIN cup 4 mm / 20°C)
Application temperature 18°C – 30°C
Potlife 4 hours at 25°C
28 2929WWW.KRISTALCOATINGS.COM WWW.KRISTALCOATINGS.COM
PROPERTIES• White Surfacer
• High Solid product
• Good covering strength
• Excellent filling properties
• VOC Complaint
Available in 3,5 and 1 liter packaging
PROPERTIES• Grey Surfacer
• High Solid product
• Good covering strength
• Excellent filling properties
• VOC Complaint
Available in 3,5 and 1 liter packaging
Available in 5 and 1 liter packaging
Available in 5 and 1 liter packaging
KRISTAL HS SURFACER 52 4:1 PLUSWHITE Article number: 5229
KR
IST
AL
PLU
S H
S
KRISTAL HS SURFACER 52 4:1 PLUSDARK GREY Article number: 5226
KRISTAL HS Surfacer 52 PLUS
Mixing ratio4:1 with KRISTAL HS Hardener 82 Fast PLUS / KRISTAL HS Hardener 50° LT Fast PLUSAdd up to 15% KRISTAL 2K PU Thinner PLUS
Equipment set-up1.4 – 1.8 mm spray nozzle1.8 – 2.2 bar at the air inlet
Spray coats & layer thickness
1 – 3 spray coats60 – 180 µm
Flash-off 5 – 10 minutes between the layers
Drying 30 minutes at 60°C (see TDS)
Application viscosity 17 – 19 seconds (DIN cup 4 mm / 20°C)
Application temperature 18°C – 30°C
Potlife 90 – 120 minutes at 20°C
KRISTAL HS SURFACER 52 4:1 PLUSArticle number: 5225 BLACK
KRISTAL HS SURFACER 52 4:1 PLUSGREY Article number: 5227
KRISTAL HS HARDENER 50° LT PLUS50° FAST Article number: 8217
KRISTAL HS HARDENER 50° LT PLUSArticle number: 821550° STD
PROPERTIES• Black Surfacer
• High Solid product
• Good covering strength
• Excellent filling properties
• VOC Complaint
PROPERTIES• Dark Grey Surfacer
• High Solid product
• Good covering strength
• Excellent filling properties
• VOC Complaint
Available in 3,5 and 1 liter packaging
Available in 3,5 and 1 liter packaging
30 3131WWW.KRISTALCOATINGS.COM WWW.KRISTALCOATINGS.COM
Available in 5 and 1 liter packaging
KR
IST
AL
PLU
S H
S
KRISTAL EPOXY PRIMER-SURFACER 62 GREY 4:1 PLUS & KRISTAL EP PRIMER-SURFACER 62 HARDENER PLUS Article number: 5370, 8370
KRISTAL 2K WASHRPRIMER CR 50 1:1 PLUS & KRISTAL WASHPRIMER 50 HARDENER PLUSArticle number: 5020, 8020
KRISTAL Epoxy Primer-Surfacer 62 PLUS
Mixing ratio4:1 with KRISTAL EP Primer-Surfacer 62 Hardener PLUS Add up to 30% KRISTAL 2K PU Thinner PLUS
Equipment set-up1.6 – 1.8 mm spray nozzle1.8 – 2.2 bar at the air inlet
Spray coats & layer thickness
1 – 3 spray coats60 – 180 µm
Flash-off 10 – 20 minutes between the layers
Drying 60 minutes at 60°C (see TDS)
Application viscosity 16 – 22 seconds (DIN cup 4 mm / 20°C)
Application temperature 15°C – 30°C
Potlife 24 hours at 20°C
KRISTAL 2K Washprimer CR 50 PLUS
Mixing ratio 1:1 with KRISTAL Washprimer 50 Hardener PLUS
Equipment set-up1.3 – 1.5 mm spray nozzle1.8 – 2.2 bar at the air inlet
Spray coats & layer thickness
1 – 2 spray coats15 – 30 µm
Flash-off 10 – 20 minutes between the layers
Drying 20 minutes at 60°C (see TDS)
Application viscosity 18 – 20 seconds (DIN cup 4 mm / 20°C)
Application temperature 10°C – 30°C
Potlife 24 hours at 20°C
KRISTAL 2K SPEED ADDITIVEArticle number: 3117
KRISTAL 2K PU THINNER PLUSSLOW Article number: 3112
KRISTAL 2K PU THINNER PLUSArticle number: 3110STD
KRISTAL 2K PU THINNER PLUSFAST Article number: 3111
Available in 5 and 1 liter packaging
Available in 5 and 1
liter packaging
Available in 1 liter packaging
Primer available in 4 and 1 liter packaging
Hardener available in 1 and 0,25 liter packaging
Available in 5 and 1 liter packaging
32 3333WWW.KRISTALCOATINGS.COM WWW.KRISTALCOATINGS.COM
Available in 5 and 1 liter packaging
KR
IST
AL
PLU
S H
S
KRISTAL 1K PLASTIC ADHESIVEPRIMER Article number: 5120
KRISTAL 1K Plastic Adhesive Primer
Mixing ratio Ready for use
Equipment set-up1.2 – 1.3 mm spray nozzle2.0 – 2.2 bar at the air inlet
Spray coats & layer thickness
1 full spray coat, maximum 2 full spray coats5 – 7 µm
Flash-offApply finish after 20 – 30 minutesMaximum 2 hours for finishing
Drying n.a.
Application viscosity n.a.
Application temperature 15°C – 30°C
Potlife n.a.
KRISTAL SPOT REPAIR THINNER PLUSArticle number: 3127
KRISTAL AQUA DEGREASER 3000 PLUSArticle number: 3000
KRISTAL SILICON REMOVER D6 PLUS KRISTAL SILICON REMOVER D8 PLUSSTD SLOWArticle number: 3113 Article number: 3115
Available in 5 liter packaging
Available in 5 and 1 liter packaging
SUITABLE FOR THE FOLLOWING PLASTICS:• PP
• ABS
• PUR
• PC
• PA
• EPDM
Available in 1 liter packaging
Available in 5 and 1 liter packaging
34 3535WWW.KRISTALCOATINGS.COM WWW.KRISTALCOATINGS.COM
KRISTAL FILLERS
KRISTAL MULTI POLYESTER UNIVERSAL
KRISTAL PLASTIC UNIVERSAL FILLER
PROPERTIES• Universal putty
• Large application area
• Easy to sand
• Little afterbake
PROPERTIES• Putty with glass fibers
• Suitable as repair for
reinforced polyester
substrates
• High filling properties
• Excellent adhesion
Available in 1,8 kilogram packaging Available in 1 kilogram packaging
PROPERTIES• Putty in cartridge packaging
• Universal putty
• Excellent adhesion on sheet
steel, aluminium and glass-fiber
reinforced body parts based on
polyester material
Available in 1,5 kilogram cartridge packaging
PROPERTIES• White universal putty
• Suitable for all filling works in the automotive branch
• Easy application
• Fast curing
Available in 1,8 kilogram packaging
FILLER
WHITE
Article number: 4007
Article number: 4009
KRISTAL FIBREGLASS FILLER
KRISTAL RENOVATION
FILLER
PASTE
Article number: 4010
Article number: 4017
KR
IST
AL
FILL
ER
S
The assortment of KRISTAL fillers consists out of high quality and
specific products suitable for all activities in the collision repair
sector. The KRISTAL fillers offer an excellent basis for the complete
system, are optimal applicable en provide an excellent adhesion
on all common substrates. The KRISTAL fillers have good curing
properties and a dry surface which eases the sanding activities.
36 3737WWW.KRISTALCOATINGS.COM WWW.KRISTALCOATINGS.COM
ZENITH
ZE
NIT
HZENITH is the budget product line of Kristal Coatings. We are aware
that besides serving the top market, there is also a market for lower
priced budget products. To give our valued distributors also an
opportunity to enter and serve this market we have developed ZENITH.
ZENITH is being offered at low pricing with nonetheless high-quality
products, products developed, manufactured in the Netherlands
with Dutch quality. The ZENITH product range offers 2 Clear Coats
and 1 Surfacer with the required auxiliary products as Hardeners
and Thinners. Furthermore all ZENITH products are VOC Compliant
according EU directive 2004/42/EC and are easy to use.
ZENITH HS CLEAR COATSCRATCH-RESISTANT Z39 2:1
ZENITH HS Clear Coat Scratch-Resistant
Z39 2:1 is the anti-scratch Clear Coat
within the ZENITH product range. A Clear
Coat which is easy to use and VOC
compliant according EU directive
2004/42/EC. ZENITH HS Clear Coat
Scratch-Resistant Z39 2:1 has a premium
gloss level, very good adhesive
properties and high chemical resistance.
A price conscious product with
high-quality end-results for a beautiful
finish.
ZENITH HS420 CLEAR COAT 2:1
ZENITH HS420 Clear Coat 2:1 is the latest Clear
Coat addition to the ZENITH product range of
Kristal Coatings. A premium quality product for
an economic price. ZENITH HS420 Clear Coat
2:1 is a very easy to use product, applied with the
‘conventional’ method. A forgiving Clear Coat
which has room for error, such as high
resistance for drops. If required, ZENITH HS420
Clear Coat 2:1 is very easy to polish. As the name
already indicates, the VOC value of ZENITH
HS420 Clear Coat 2:1 is 420 g/L. which makes
the Clear Coat VOC compliant according the
latest EU directive.
38 3939WWW.KRISTALCOATINGS.COM WWW.KRISTALCOATINGS.COM
ZENITH HS420 CLEAR COAT 2:1 ZENITH HS520 SURFACER GREY 5:1 ZENITH HS420 HARDENER
ZENITH HS420 HARDENER
ZENITH HS420 HARDENERArticle number: Z9209 Article number: Z5200 Article number: Z8200
Article number: Z8201
Article number: Z8202
PROPERTIES• High Solid product
• Premium quality
• High gloss finish
• Conventional drying
• VOC Compliant
• Easy application
Available in 5 liter packaging
PROPERTIES• Grey surfacer
• High Solid products
• Good sanding properties
• Good covering and filling
• VOC Compliant
Available in 3,5 liter packaging
STD
FAST
SLOW
ZE
NIT
H
ZENITH HS420 Clear Coat
Mixing ratio2:1 with ZENITH HS420 HardenerAdd up to 10% ZENITH Multi-Thinner
Equipment set-up1.2 – 1.3 mm spray nozzle2.0 – 2.2 bar at the air inlet
Spray coats & layer thickness
1½ – 2 spray coats50 – 70 µm
Flash-off5 – 10 minutes between the layers3 – 5 minutes after the last spray coat
Drying 20 – 35 minutes at 60°C (see TDS)
Application viscosity 16 – 18 seconds (DIN cup 4 mm / 20°C)
Application temperature 18°C – 30°C
Potlife 4 hours at 20°C
ZENITH HS520 Surfacer
Mixing ratio5:1 with ZENITH HS420 Hardener FastAdd up to 10% ZENITH Multi-Thinner
Equipment set-up1.4 – 1.8 mm spray nozzle1.8 – 2.2 bar at the air inlet
Spray coats & layer thickness
2 – 3 spray coats60 – 180 µm
Flash-off 5 – 10 minutes between the layers
Drying 30 minutes at 60°C (see TDS)
Application viscosity 20 – 23 seconds (DIN cup 4 mm / 20°C)
Application temperature 18°C – 30°C
Potlife 120 – 150 minutes at 20°C
Available in 2,5 liter packaging
Available in 2,5 liter packaging
Available in 2,5 liter packaging
40 4141WWW.KRISTALCOATINGS.COM WWW.KRISTALCOATINGS.COM
ZENITH MULTI-THINNER
ZENITH MULTI-THINNER
ZENITH HS CLEAR COAT SCRATCH-RESISTANT Z39 2:1 ZENITH HS HARDENER SR39 STD
Article number: Z3030
Article number: Z3032
Article number: Z9039 Article number: Z8130
SLOW
STD
ZENITH HS Clear Coat Scratch-Resistant Z39
Mixing ratio2:1 with ZENITH HS Hardener SR39Add up to 10% ZENITH Multi-Thinner
Equipment set-up1.2 – 1.3 mm spray nozzle2.0 – 2.2 bar at the air inlet
Spray coats & layer thickness
2 – 3 spray coats50 – 70 µm
Flash-off 10 – 15 minutes between the layers
Drying 30 minutes at 60°C (see TDS)
Application viscosity 16 – 18 seconds (DIN cup 4 mm / 20°C)
Application temperature 18°C – 30°C
Potlife 4 hours at 20°C
ZE
NIT
H
Available in 5 liter packaging
Available in 2,5 liter packaging
Available in 5 liter packaging
PROPERTIES
• High Solid product
• Excellent quality
• High gloss finish
• Scratch-Resistant product
• VOC Compliant
• Easy application
Available in 5 liter packaging
42 4343WWW.KRISTALCOATINGS.COM WWW.KRISTALCOATINGS.COM
All products feature an QR-code. When scanning
this code you will be redirected to the concerning
product page on our website.
Always want to be up to date with KRISTAL? Like Kristal on Facebook via
facebook.com/kristalcoatings or follow us on Twitter via @kristalcoatings
KRISTAL COATINGS B.V.
Postal address:P.O. Box 726640 AB BEUNINGENThe Netherlands
Visiting address:Platinawerf 22B6641 TL BEUNINGENThe Netherlands
T +31 24 675 2636F +31 24 675 3360E [email protected]
V 12