Product Overview - Reiplinger · 2017-12-12 · Punching machine for offset cut and straight cut...
Transcript of Product Overview - Reiplinger · 2017-12-12 · Punching machine for offset cut and straight cut...
Description: Utility model - protected by law; patent pending Corresponds to CE according to DIN EN 294 (passing through openings)
Hydro-Pneumatic drive Open tools for comfortable operation Press cut of the opening for the inlet drive*
Reiplinger® GLS for triple hole punching installed on rotating mechanism*
Including foot control Incl. measurement device (1:1 & 1:2, measuring range = 2500 mm)
Including blowout pistol for easy waste removal Solidworkbench Expandabletoamulti-taskworkstation
BS - Multi - Max® Bearbeitungstisch
Product Overview
BS Multi - Max HS®
Hand lever punch for straight and eccentric cut
Description: Manual Operation Fitting Punch For Straight and Eccentric CutIntegrated,AdjustableOffsetStroke Slotted Hole or Round Holer Compressed Air Independent Location Independent Punch Machine for manufacturing small batch dimensions
Technical data:Required leverage Force: 250 NLever Arm: 800 mmHeight without lever arm: 150 mmDeepness: 100 mmWidth: 140 mmWeight: 5 kg
Description: Hydropneumatic drive Straight cut Open tool – direct access Safe (CE) Easy handling Operating pressure 0,6 – 1 MPa (6 - 10 bar)
Precise, hardened guide bushes Multiple cutting edges by turning the die up to 8 times
Technical Data:Punching Force at 0,675 MPa (6,75 bar): 40kNMax. pressure: 1 MPa (10 bar)
Max. bar size: Fl. 18 x 6,5 mmCross section St 37: max. 96 mm2
Air consumption at 0,6 MPa (6 bar): (approx.) 4 NL/HubOil volume - Oil type HLP22: (approx.) 50 cm3
Weight: (approx.) 6kgIncluding controls & accessories: 8,5kg
BS - Multi - Max® BeSt40Punching Machine for straight cut (Form Cut)
Accessories Foot control Hand control Measuring equipment Scale Slide gauge mounting adapter for most common sash workingtables
Description: Corresponds to CE according to DIN EN 294 (passing through openings)
Pneumatic drive Including foot controlFreeWorkbenchmounting Mounting possibility to Reiplinger®
machiningworkbenchFreeWorkbenchmountingAllowsworkfloworientedpositioning
Accessories Measuring device (1:1 & 1:2), left or right site (max. measure range 2500 mm) Stand for measuring device
Technical Data:PunchForce: 14kNat 0,6 MPa (6 bar)
WorkingPressuremin.: 0,6 MPa (6 bar)
WorkingPressuremax.: 1 MPa (10 bar)
Weight: (approx.)13kg
Installation dimensions could be received
Aufsatzgetriebestanze PS AGSPress cut of the opening for top drives
Description: Corresponds to CE according to DIN EN 294 (Passing through Openings)
Pneumatic Drive Integrated Manual Control For Aluminum or Polyamide Driving Rods Diameter 4,5 – 10 mm Closed ToolPuncheswithDifferentCuttingProfiles: O | O (Hole-Slot-Hole) O (Hole Only, i.e. for Coupling)
Accessories Feet Control Stand for the Measuring Device Measuring Device (max. measuring
range = 2500 mm)
Technical Data:Punch diameter: 4,5 - 10 mmPunching Force: PolyamideDrivingRods 7,5 kNat 0,6 MPa (6 bar) Aluminum Driving Rods 10,3 kNat 0,6 MPa (6 bar)
WorkingPressuremin.: 0,6 MPa (6 bar)
WorkingPressuremax.: 1 MPa (10 bar)
Weight: (approx.)10 kgInstallation Dimensions could be received after Consultation!
BS - Multi - Max® PS AluFitting Punching machine for Machining of Driving Rods for Aluminum Windows
Handstanze PFS - Multi - Max®
Punching of bonding- and pin holes for corner joints
Description: Mobile light hand punching machine Ergonomic centre of mass Hydropneumatic drive Including hand controlOptionalavailablemountingpossibilitytoworkbenches Foot control (onlyincombinationwithworkbenchoption) CE conform (CE according DIN EN 294)
Compact designOptionalexpansionstageupto20kN(weightapprox.6kg)
Technical Data:PunchingForce: 8 kNat 0,6 MPa (6 bar)
WorkingPressuremin.: 0,6MPa(6 bar)
WorkingPressuremax.: 1MPa(10 bar)
ReturnForce: 0,9kNMax. cross section:Aluminum: 27 mm^2Steel: 16 mm^2Weight: (approx.)4,5 kg
Description: Utility model - protected by law; patent pending Corresponds to CE according to DIN EN 294 (passing through openings)
Hydro-Pneumatic drive Open tools for comfortable operation Press cut of the opening for the inlet drive*
Reiplinger® GLS for triple hole punching installed on rotating mechanism*
Including foot control Incl. measurement device (1:1 & 1:2, measuring range = 2500 mm)
Including blowout pistol for easy waste removal Solidworkbench Expandabletoamulti-taskworkstation
Technical Data:Punching Force Handle-Hole Punching: 50kNat 0,6 MPa (6 bar) Punching Force Access Devices Punching: 13,1kNat 0,6 MPa (6 bar) WorkingPressuremin.: 0,4MPa(4 bar)
WorkingPressuremax.: 0,6MPa(6 bar)
Weight: (approx.)50 kgDimensions (W x L x H): (approx.) 1050 x 600 x 500 mm
BS - Multi - Max® BearbeitungstischFitting Punching machine for Machining of Driving Rods for Aluminum Windows
* after consultation
Technical Data:Punching Force at 0,6 MPa (6 bar): Matrix 28kNPushrod 18kNMaximum pressure 1 MPa (10 bar)
Return force: Matrixside 2,5kNPushrodside 1,4kNStandard hardware:16 x 2,5 + 10 x 3 60 mm2
Air consumption at 0,6 MPa (6 bar): (approx.) 4,2 NL/HubOil volume: (approx.) 125 cm3
Weight: (approx.) 12kgIncludingcontrols&accessories: 13,9kg
BS - Multi - Max® DUOPunching Machine for eccentric cut(additionally punching / embossing)
Description: Hydropneumatic drive Eccentric cut Open tool – direct access User friendly Safe (CE) Compact design Easy handling Operating pressure 0,6 – 1 MPa (6 - 10 bar)
Good waste removal Precise, hardened guide bushes Noiseless, almost burr-free cut Patented
Accessories Foot control Hand control Tables Measuring equipment Scale Slide gauge
Description: Hydro pneumatic drive (separatepressureintensifier) Very compact designSimpleinsertionoftheprofiles High level of safety (CE) punching corner joints and post Advantages: Conceived stop system allowsquickandeasyeditingof differentprofilewidths.
Accessories: Foot Control
Technical data:Punchforceat0,6MPa(6bar): 50 kNOperating Pressure min.: 0,6 MPa (6 bar)
Operating Pressure max.: 1 MPa (10 bar)
Multi - Max® ZyDu 50VssPunch for aluminum facings
Technical data:PunchForceat0,6MPa(6bar): 60 kNOperation Pressure min.: 0,6 MPa (6 bar)
Operation Pressure max.: 1 MPa (10 bar)
ZY DU100 H20-AE®
Reinforcing Punch to punch a wide variety of reinforcing bars thanks cassette principle.
Accessories: Foot control
Opt. Acces-sories: Scale Slider
Description: Hydro pneumatic drive Various reinforcing bars thankscassetteprinciple Also closed sections (possibly with additional hole punching) Simple insert by threading Advantages: no sawdust, no complicated clamps necessary time saving comparedtotheSaws,flexibledesignthanks separatepressureintensifier.
BS - Multi - Max® PS 100Punching machine for offset cut and straight cut(additionally punching / counter sunk)
Description: Tool with pneumatic zylinder Designed for small up to medium size production Open tool Easy access Anodic oxidation treated zylinder surfaces Enforced die plate Hardened guides Integrated blow out function Offsetcuts (additionallypunchung/countersunk) Straight cuts Tool change within 15 minutes CE conform
Accessories Foot switch Hand switch Scale Slider
Technical Data:PunchingForceat0,6MPa(6bar): 15 kNWorkingPressuremin.: 0,6MPa(6 bar)
WorkingPressuremax.: 1MPa(10 bar)
BS - Multi - Max® PS 100 Türbeschlagstanze Multi - Max® UBS / FBS 40Punching machine for door locks
Description: Smooth cutting because of hydro-pneumatic drive Hardened guides Open tool - direct access Tool already mounted to zylinder Anodic oxidation treated zylinder surfacesForU-andFlatlocks Cutting stainless steel
Accessories Foot switch Scale Slider
Technical Data:PunchingForceat0,6MPa(6bar): 40 kNWorkingPressuremin.: 0,55MPa(5,5 bar)
WorkingPressuremax.: 1MPa(10 bar)
Standard tools: U-lock 24x6and24x8 Flatlock 24x3
REIPLINGER GmbH & Co.KGIm Voigtstedter Feld 2 06528 Edersleben
Sales Office: Bahnhofstraße 31 . 54634 Bitburgfon: 0049 (0)6561/94 75 0 fax: 0049 (0)6561/94 75 10email:[email protected]: www.reiplinger.com