Product overview industrial lubrication BEKA OVERVIEW INDUSTRIAL LUBRICATION...

Click here to load reader

  • date post

    15-May-2019
  • Category

    Documents

  • view

    229
  • download

    2

Embed Size (px)

Transcript of Product overview industrial lubrication BEKA OVERVIEW INDUSTRIAL LUBRICATION...

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

00-1

-10-0

2

BEKA

BEKA

BEKAR

PRODUCT OVERVIEWINDUSTRIAL LUBRICATION

Single Line Lubrication Systems

Gear pump units .................................................................................................................................. 01-1-10-05

Pneumatic pump units .......................................................................................................................... 01-1-10-07

Hydraulic pump units ............................................................................................................................ 01-1-10-08

Manual piston pumps

Proportioning valves, metering valves .................................................................................................. 01-1-10-09

Metering distributor block, Metering unit ............................................................................................... 01-1-10-10

Distributor strips ................................................................................................................................... 01-1-10-11

Single line distributor (NV, UEN, GVO-1, BL-1, BL-11)

Progressive Central Lubrication Systems

Progressive distributors ........................................................................................................................ 01-1-10-12

(MX-F, MX-I, LX-2, LX-3, LX-4, SX-1, SX-2, SX-3, SX-5, UX, SXE-2, SXE-2R, SXE-3, SXD, SXW-1, SXW-2)

Dual Line Central Lubrication Systems

Dual line distributors (BV, BW, BX, BY, BZ, UXZ)...................................................................................... 01-1-10-13

Components for main line controlling

Components for change-over monitoring

Piston pumps

Oil Lubrication Pumps

Series ............................................................................................................................................ 01-1-10-14TDM

Series ................................................................................................................................................ 01-1-10-15A

Series D

Series ................................................................................................................................................ 01-1-10-16C

Series - electric drive ................................................................................................................... 01-1-10-17OKG

Electromagnetic drive (K 407, K 412, K 442, K400, MP 2646)

Pneumatic drive (P2663, P2664, P2669, P2686, PAU) ......................................................................... 01-1-10-18

Mechanic drive, single piston-tappet pump (EHS) or tappet pump (SP)

Hydraulic drive (HP-2122)

Grease Lubrication Pumps

Series (FKR, FKP, FKG, FKG-V, FKG-S, FKG-A) ........................................................................... 01-1-10-19FK

Series and (FKGM, FKMS, FVAM) - electric driveFK FVAM

Series - electric drive ................................................................................................................... 01-1-10-20PICO

Series - electric or rotating driveFK...-OC / FK...-EP

Series - electric drive .............................................................................................. 01-1-10-21GIGA/ GIGAPLUS

Series (F6, F-super, F-super 3) ......................................................................................................... 01-1-10-22F

Electromagnetic drive (MP-2643) ......................................................................................................... 01-1-10-23

Mechanic drive (FHX-2, HAP-2535, FHX, FHX-MX)

Pneumatic drive (P-2103,FKG-PP1)

Hydraulic drive (FKGM-HP1,HP-2369, HKP-1, HPM-2, HPH-2) .......................................................... 01-1-10-24

Circulating Lubrication Systems

Flow control valve, flow limiting device, volume flow control FXE ........................................................ 01-1-10-25

Gear pumps ......................................................................................................................................... 01-1-10-26

Internal gear pumps

Special lubrication systems

Barrel pumps (EFP-1, HFP-3U, Qmaxx-2, Qmaxx-1, PFP-1U) ............................................................. 01-1-10-27

Lubrication pinions for gears................................................................................................................... 01-1-10-28

Central lubrication systems

Product overview industrial lubrication

Table of contents

revision 01/2015

BEKA 201 All rights reserved!510902

00384

Pro

duct

overv

iew

industr

ial lu

bri

cati

on

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

Product overview industrial lubrication

Table of contents

Product overview industrial lubrication

PU-lubrication pinion for gearings and chains ......................................................................................... 01-1-10-28

Special units ......................................................................................................................................... 01-1-10-29

Oil-air units ........................................................................................................................................... 01-1-10-30

Oil-air mixing distributor

Accessories

Oil reservoir .......................................................................................................................................... 01-1-10-31

01-1

-10-0

4

01-1

-10-0

3

Singleline Central Lubrication SystemsSingleline Central Lubrication Systems

Table of contents

Pro

duct

overv

iew

industr

ial lu

bri

cati

on

Pro

duct

overv

iew

industr

ial lu

bri

cati

on

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

Product overview industrial lubrication

Table of contents

Product overview industrial lubrication

PU-lubrication pinion for gearings and chains ......................................................................................... 01-1-10-28

Special units ......................................................................................................................................... 01-1-10-29

Oil-air units ........................................................................................................................................... 01-1-10-30

Oil-air mixing distributor

Accessories

Oil reservoir .......................................................................................................................................... 01-1-10-31

01-1

-10-0

4

01-1

-10-0

3

Singleline Central Lubrication SystemsSingleline Central Lubrication Systems

Table of contents

Pro

duct

overv

iew

industr

ial lu

bri

cati

on

Pro

duct

overv

iew

industr

ial lu

bri

cati

on

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

Overview

Model Type Delivery volume Oper. pressure Reservoir Reservoir Lubricant Operating

max. capacity material voltage(l/min) (bar) (l)

2700 - -EA 3 / EA 6

(without reservoir)

3 aluminiumEA 3 / EA 6

with 3 l-reservoir

6 steel / oilEA 3 / EA 6

with 6 l-reservoir 2705 1 or 2 35 plastic 20 - 700 400 V AC /

transparent* mm/s 3~

13 aluminiumEA 3 / EA 6

with 13 l-reservoir

16 steelEA 3 / EA 6

with 16 l-reservoir

30 aluminiumEA 3 / EA 6

with 30 l-reservoir

Model Type Delivery volume Oper. pressure Reservoir Reservoir Lubricant Operating

max. capacity material voltage(l/min) (bar) (l)

(w/o reservoir) 2710 - -ES

3 aluminiumES 2711

with 3 l-reservoir oil

6 steel / 20 - 700ES 2711

with 6 l-reservoir platic mm/s 400 V AC /

transparent* or 3~

2711 0,4 35 13 aluminium fluid greaseES 2711

with 13 l-reservoir acc. to

16 steel release listES 2711

with 16 l-reservoir

30 aluminiumES 2711

with 30 l-reservoir

Pump units

Gear pump units

Pum

p u

nit

s

EA 3 EA 3 / EA 6 EA 3 / EA 6 EA 3 / EA 6 EA 3 / EA 6 EA 3 / EA 6

EA 6 with 3 l-reservoir with 6 l-reservoir with 13 l-reservoir with 16 l-reservoir with 30 l-reservoir

ES ES 2711 ES 2711 ES 2711 ES 2711 ES 2711

with 3 l-reservoir with 6 l-reservoir with 13 l-reservoir with 16 l-reservoir with 30 l-reservoir

Singleline Central Lubrication Systems

EA 1,5 BEKA

Xlube

Overview

Model Type Delivery volume Oper. pressure Reservoir Reservoir Lubricant Operating

max. capacity material voltage(l/min) (bar) (l)

2805Super 3 EA-tronic

left 3 plastic,

2806 transparent oilSuper 3 EA-tronic

right 20 - 700 115 V AC

4 aluminium mm/s 230 V ACSuper EA-tronic

with 4 l-reservoir 0,4 35 or 24 V DC

2800 6 steel / fluid greaseSuper EA-tronic

with 6 l-reservoir plastic acc.to

transparent* release list

3Mini EA-tronic

with 3 l-reservoir plastic,

2810 1,5 transparent 115 V ACMini 2 EA-tronic

230 V AC

Model Type Delivery volume Oper. pressure Reservoir Reservoir Lubricant Operating

max. capacity material voltage(l/min) (bar) (l)

oil 2727 oil, 20 - 700EA 1,5

0,4 40 3 / 6* mm/s 400 V AC /

fluid grease 2728 fluid grease a/t 3~EA 1,5

plastic, release list

transparent oil, 20 - 700

2712 0,25 28 1,2 mm/s or 230 V ACBEKA Xlube

fluid grease a/t

release list

Pump units

Gear pump units

Pum

p u

nit

sSuper 3 Super 3 Super EA-tronic Super EA-tronic Mini EA-tronic Mini 2

EA-tronic EA-tronic EA-tronicleft right with 4 l-reservoir with 6 l-reservoir with 3 l-reservoir

Singleline Central Lubrication Systems

01-1

-10-0

6

01-1

-10-0

5

* = on request

* = on request

* = on request * = on request

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

Overview

Model Type Delivery volume Oper. pressure Reservoir Reservoir Lubricant Operating

max. capacity material voltage(l/min) (bar) (l)

2700 - -EA 3 / EA 6

(without reservoir)

3 aluminiumEA 3 / EA 6

with 3 l-reservoir

6 steel / oilEA 3 / EA 6

with 6 l-reservoir 2705 1 or 2 35 plastic 20 - 700 400 V AC /

transparent* mm/s 3~

13 aluminiumEA 3 / EA 6

with 13 l-reservoir

16 steelEA 3 / EA 6

with 16 l-reservoir

30 aluminiumEA 3 / EA 6

with 30 l-reservoir

Model Type Delivery volume Oper. pressure Reservoir Reservoir Lubricant Operating

max. capacity material voltage(l/min) (bar) (l)

(w/o reservoir) 2710 - -ES

3 aluminiumES 2711

with 3 l-reservoir oil

6 steel / 20 - 700ES 2711

with 6 l-reservoir platic mm/s 400 V AC /

transparent* or 3~

2711 0,4 35 13 aluminium fluid greaseES 2711

with 13 l-reservoir acc. to

16 steel release listES 2711

with 16 l-reservoir

30 aluminiumES 2711

with 30 l-reservoir

Pump units

Gear pump units

Pum

p u

nit

s

EA 3 EA 3 / EA 6 EA 3 / EA 6 EA 3 / EA 6 EA 3 / EA 6 EA 3 / EA 6

EA 6 with 3 l-reservoir with 6 l-reservoir with 13 l-reservoir with 16 l-reservoir with 30 l-reservoir

ES ES 2711 ES 2711 ES 2711 ES 2711 ES 2711

with 3 l-reservoir with 6 l-reservoir with 13 l-reservoir with 16 l-reservoir with 30 l-reservoir

Singleline Central Lubrication Systems

EA 1,5 BEKA

Xlube

Overview

Model Type Delivery volume Oper. pressure Reservoir Reservoir Lubricant Operating

max. capacity material voltage(l/min) (bar) (l)

2805Super 3 EA-tronic

left 3 plastic,

2806 transparent oilSuper 3 EA-tronic

right 20 - 700 115 V AC

4 aluminium mm/s 230 V ACSuper EA-tronic

with 4 l-reservoir 0,4 35 or 24 V DC

2800 6 steel / fluid greaseSuper EA-tronic

with 6 l-reservoir plastic acc.to

transparent* release list

3Mini EA-tronic

with 3 l-reservoir plastic,

2810 1,5 transparent 115 V ACMini 2 EA-tronic

230 V AC

Model Type Delivery volume Oper. pressure Reservoir Reservoir Lubricant Operating

max. capacity material voltage(l/min) (bar) (l)

oil 2727 oil, 20 - 700EA 1,5

0,4 40 3 / 6* mm/s 400 V AC /

fluid grease 2728 fluid grease a/t 3~EA 1,5

plastic, release list

transparent oil, 20 - 700

2712 0,25 28 1,2 mm/s or 230 V ACBEKA Xlube

fluid grease a/t

release list

Pump units

Gear pump units

Pum

p u

nit

s

Super 3 Super 3 Super EA-tronic Super EA-tronic Mini EA-tronic Mini 2

EA-tronic EA-tronic EA-tronicleft right with 4 l-reservoir with 6 l-reservoir with 3 l-reservoir

Singleline Central Lubrication Systems01-1

-10-0

6

01-1

-10-0

5

* = on request

* = on request

* = on request * = on request

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

Model Type Delivery volume Pressure Operating Relief press. Reservoir Reservoir Lubric.

reduction press. capacity material(cm/stroke) (bar) (bar) (l)

1 1:2 oilPH1

2577 6 - - 20 - 700PH6

10 1:1 mm/sPH10

without reservoir max. 55 1 - 2 or

PH1-6 1 1:2 fluid gre.

2578 6 6 steel / acc.toPH6-6

10 1:1 plastic releasePH10-6

with 6 l-reservoir transp.* list

Model Type Delivery volume Operating Reservoir Reservoir Lubricant

press. capacity material(cm/stroke) (bar) (l)

2532 6 / 10 / 15 30 1,2 plastic, oil, 20 - 700 mm/s orHAP-2532

2533 6 / 10 transparent fluid grease acc.to release listHAP-2533

Pum

p u

nit

s

Hydraulic pump units

Manual piston pumps

PH1/ PH6/ PH10 PH1-6 / PH6-6 / PH10-6

without reservoir with 6 l-reservoir

HAP-2532 HAP-2533

Overview

Pump units

Singleline Central Lubrication Systems

Model Type Delivery volume Pressure Drive Reservoir Reservoir Lubricant

reduction press. capacity material(cm/stroke) (bar) (l)

2,5 / 4,2 / 8 plastic,P30.2 to P50.8

2564 2,7 transparent

with 2,7 l-reservoir 2564 30 or 50 1:9 5 - 10 oil

6 steel / 20 - 700 mm/sP30-6

with 6 l-reservoir plastic or

transparent* fluid grease

2563 2,5 / 4,2 / 8 plastic, tr. acc. toP5.2 / P8.4 / P8.8

P5.6 / P8.6 10 1:11 4 - 8 steel / release list

with 6 l-reservoir 2565 15 1:8 6 plastic

transparent*

Model Type Delivery volume Pressure Drive Reservoir Reservoir Lubricant

reduction press. capacity material(cm/stroke) (bar) (l)

2564 30 or 50 1:9 5 - 10P30 and P50

(without reservoir) Oil

3 1:32 - - 20 - 700 mm/sP605

(without reservoir) 2566 9,5 1:12 3 - 8 or

15 1:8 fluid grease

P5.1,2 and P8.1,2 2562 10 1:11 4 - 8 1,2 plastic, acc.to

with 1,2 l-reservoir 15 1:8 transparent release list

2161 50 1:5 6 - 10 4PPF-1

Pum

p u

nit

sP30.2 P50.8 2564 P30-6 P5.2 / P8.4 / P8.8 P5.6 / P8.6towith reservoir with 2,7 l-reservoir with 6 l-reservoir with reservoir with 6 l-reservoir

Pneumatic pump units

P30 P50 P605 P5.1,2 P8.1,2 PPF-1and and

without reservoir without reservoir with 1,2 l-reservoir with 4 l reservoir

Pump units

Overview

Singleline Central Lubrication Systems

01-1

-10-0

8

01-1

-10-0

7

* = on request

* = on request

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

Model Type Delivery volume Pressure Operating Relief press. Reservoir Reservoir Lubric.

reduction press. capacity material(cm/stroke) (bar) (bar) (l)

1 1:2 oilPH1

2577 6 - - 20 - 700PH6

10 1:1 mm/sPH10

without reservoir max. 55 1 - 2 or

PH1-6 1 1:2 fluid gre.

2578 6 6 steel / acc.toPH6-6

10 1:1 plastic releasePH10-6

with 6 l-reservoir transp.* list

Model Type Delivery volume Operating Reservoir Reservoir Lubricant

press. capacity material(cm/stroke) (bar) (l)

2532 6 / 10 / 15 30 1,2 plastic, oil, 20 - 700 mm/s orHAP-2532

2533 6 / 10 transparent fluid grease acc.to release listHAP-2533

Pum

p u

nit

s

Hydraulic pump units

Manual piston pumps

PH1/ PH6/ PH10 PH1-6 / PH6-6 / PH10-6

without reservoir with 6 l-reservoir

HAP-2532 HAP-2533

Overview

Pump units

Singleline Central Lubrication Systems

Model Type Delivery volume Pressure Drive Reservoir Reservoir Lubricant

reduction press. capacity material(cm/stroke) (bar) (l)

2,5 / 4,2 / 8 plastic,P30.2 to P50.8

2564 2,7 transparent

with 2,7 l-reservoir 2564 30 or 50 1:9 5 - 10 oil

6 steel / 20 - 700 mm/sP30-6

with 6 l-reservoir plastic or

transparent* fluid grease

2563 2,5 / 4,2 / 8 plastic, tr. acc. toP5.2 / P8.4 / P8.8

P5.6 / P8.6 10 1:11 4 - 8 steel / release list

with 6 l-reservoir 2565 15 1:8 6 plastic

transparent*

Model Type Delivery volume Pressure Drive Reservoir Reservoir Lubricant

reduction press. capacity material(cm/stroke) (bar) (l)

2564 30 or 50 1:9 5 - 10P30 and P50

(without reservoir) Oil

3 1:32 - - 20 - 700 mm/sP605

(without reservoir) 2566 9,5 1:12 3 - 8 or

15 1:8 fluid grease

P5.1,2 and P8.1,2 2562 10 1:11 4 - 8 1,2 plastic, acc.to

with 1,2 l-reservoir 15 1:8 transparent release list

2161 50 1:5 6 - 10 4PPF-1

Pum

p u

nit

sP30.2 P50.8 2564 P30-6 P5.2 / P8.4 / P8.8 P5.6 / P8.6towith reservoir with 2,7 l-reservoir with 6 l-reservoir with reservoir with 6 l-reservoir

Pneumatic pump units

P30 P50 P605 P5.1,2 P8.1,2 PPF-1and and

without reservoir without reservoir with 1,2 l-reservoir with 4 l reservoir

Pump units

Overview

Singleline Central Lubrication Systems01-1

-10-0

8

01-1

-10-0

7

* = on request

* = on request

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

Design Version Meter. volume Type Connection type Relief Operating Metering

press. press. medium(mm/stroke) (bar) (bar)

G oilA

L 30 4176 Bolted connection 40 - 250 mm/sB

T 60 max. 1 max. 35 fluid greaseC

W 100 acc.release listD

(pivotable) LS 4174 Plug-type conn. 4 mm oilE

(pivotable) TS for polyamide pipes 40 - 250 mm/sF

Meter.- Type Number Connections Relief Operating Metering

Model volume Connection type of lube main lube press. max. press. medium

(mm/stroke) (bar) (bar)points line line

10 4018

30 Threaded connection

60 M10x1 3 15 - 40DVB-1

100 40181

160 Plug-type connection 1 to 10 oil

100 10 - 10004180

200 Threaded connection M8x1 mm/s

DVB-2 300 M12x1 pipe or

400 4 mm fluid grease4181

600 Plug-type connection 4 16 - 50 acc.to

200 release list41820/ 41823/ 41824

400 Threaded connection M12x1

DVB-3 600 1 to 3 or

1000 G 1/841840/ 41841/ 41842

1500 Plug-type connection

Metering elements

Metering distributor blocks DVB

Metering units 231-DV for direct lubrication point connection (static system)

4018 40181 4180 4181 41823 41841

Threaded connection Plug connection Threaded connection Plug connection Threaded connection Plug connection

Design A Design B Design C Design D

Singleline Central Lubrication Systems

Overview

Mete

ring e

lem

ents

Model Meter. volume Size Type / Connection type Relief Operating Metering

press. press. medium(mm/stroke) (bar) (bar)

10Z31ZV1

20 4036 / 4036 / oilZ31ZV2

30 plug-type plug-type 50 - 700Z31ZV3 1

50 connection connection mm/sZ31ZV5

100 4030 / for for PA pipes orZ31ZV10

150 threaded PA-pipes and max. 1 15 - 40 fluid greaseZ31ZV15

200 connection chamfer acc.toZ31ZV20 2

400 releaseZ31ZV40

500 listZ31ZV50 3

600Z31ZV60

1000Z31ZV100

Metering volume Relief Operating Material Metering

Model Type Connection type press. max. press. medium(mm/stroke)

(bar) (bar)

30 - threaded connection steel oilZ31DV3

50 - plug-type conn. or 20 - 700 mm/sZ31DV5

100 4031 for polyamide pipes 4 15 - 40 V2A or fluid greaseZ31DV10

150 - elbow plug-type conn. (1.4305) acc.toZ31DV15

200 for polyamide pipes release listZ31DV20

30Z31DDV3

60 4032 - threaded connection 1 12 - 40 steel oilZ31DDV6

100 - plug-type conn. 20 - 700 mm/sZ31DDV10

160Z31DDV16

Metering elements

Metering valves (dynamic system)

Metering valves (static system)

Z31DV.. / Z31DDV.. Z31DV.. / Z31DDV.. Z31DV..

with threaded connection with plug connection with elbow plug connection

Singleline Central Lubrication Systems

Overview

Mete

ring e

lem

ents

Size 1 Size 1 Size 1 Size 1

with threaded connection with threaded connection with plug connection with plug connection

for pipe 4 for pipe 6 for PA pipes for PA-pipes with chamfer

01-1

-10-1

0

01-1

-10-0

9

DVB-1 DVB-2 DVB-3

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

Design Version Meter. volume Type Connection type Relief Operating Metering

press. press. medium(mm/stroke) (bar) (bar)

G oilA

L 30 4176 Bolted connection 40 - 250 mm/sB

T 60 max. 1 max. 35 fluid greaseC

W 100 acc.release listD

(pivotable) LS 4174 Plug-type conn. 4 mm oilE

(pivotable) TS for polyamide pipes 40 - 250 mm/sF

Metering elements

Metering distributor blocks DVB

Metering units 231-DV for direct lubrication point connection (static system)

4018 40181 4180 4181 41823 41841

Threaded connection Plug connection Threaded connection Plug connection Threaded connection Plug connection

Design A Design B Design C Design D

Singleline Central Lubrication Systems

Overview

Mete

ring e

lem

ents

Model Meter. volume Size Type / Connection type Relief Operating Metering

press. press. medium(mm/stroke) (bar) (bar)

10Z31ZV1

20 4036 / 4036 / oilZ31ZV2

30 plug-type plug-type 50 - 700Z31ZV3 1

50 connection connection mm/sZ31ZV5

100 4030 / for for PA pipes orZ31ZV10

150 threaded PA-pipes and max. 1 15 - 40 fluid greaseZ31ZV15

200 connection chamfer acc.toZ31ZV20 2

400 releaseZ31ZV40

500 listZ31ZV50 3

600Z31ZV60

1000Z31ZV100

Metering volume Relief Operating Material Metering

Model Type Connection type press. max. press. medium(mm/stroke)

(bar) (bar)

30 - threaded connection steel oilZ31DV3

50 - plug-type conn. or 20 - 700 mm/sZ31DV5

100 4031 for polyamide pipes 4 15 - 40 V2A or fluid greaseZ31DV10

150 - elbow plug-type conn. (1.4305) acc.toZ31DV15

200 for polyamide pipes release listZ31DV20

30Z31DDV3

60 4032 - threaded connection 1 12 - 40 steel oilZ31DDV6

100 - plug-type conn. 20 - 700 mm/sZ31DDV10

160Z31DDV16

Metering elements

Metering valves (dynamic system)

Metering valves (static system)

Z31DV.. / Z31DDV.. Z31DV.. / Z31DDV.. Z31DV..

with threaded connection with plug connection with elbow plug connection

Singleline Central Lubrication Systems

Overview

Mete

ring e

lem

ents

Size 1 Size 1 Size 1 Size 1

with threaded connection with threaded connection with plug connection with plug connection

for pipe 4 for pipe 6 for PA pipes for PA-pipes with chamfer

01-1

-10-1

0

01-1

-10-0

9

DVB-1 DVB-2 DVB-3

Meter.- Type Number Connections Relief Operating Metering

Model volume Connection type of lube main lube press. max. press. medium

(mm/stroke) (bar) (bar)points line line

10 4018

20

30 Threaded connectionDVB-1

60 M10x1 3 15 - 40

100 40181

160 Plug-type connection 1 to 10 oil

100 10 - 10004180

200 Threaded connection M8x1 mm/s

DVB-2 300 M12x1 pipe or

400 4 mm fluid grease4181

600 Plug-type connection 4 16 - 50 acc.to

200 release list41820/ 41823/ 41824

400 Threaded connection M12x1

DVB-3 600 1 to 3 or

1000 G 1/841840/ 41841/ 41842

1500 Plug-type connection

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

Progressive distributors

Progressive Central Lubrication Systems

Disk construction

Segment construction Sandwich construction

Overview

Pro

gre

ssiv

e d

istr

ibuto

rs

Size Model Outlets Number of Type Connection Connection Material

outlets inlets outlets

one-sided 1 to 12 with or without M8x1 steel, galv.Z32VL1 - Z32VL12

union nut M10x1 or 1.43051

two-sided 2x1 to 2x12 4020 (M10x1, pipe- 6, steel,Z33VL2 - Z33VL24

one-sided 1 to 10 with olive M10x1 galvanized2 Z32VL1/2 - Z32VL10/2

two-sided 2x1 to 2x10Z33VL2/2 - Z33VL20/2

Distributor blocks

Metering elements

Singleline Central Lubrication Systems

Overview

Mete

ring e

lem

ents

01-1

-10-1

2

01-1

-10-1

1

Single line distributors

* no. of outlets can be increased by a connector

** no. of outlet can be increased by a connecting element

Max. no Oper. No. of Metering volume

Mod. Type of revolutions press. outlets Connection Connection Material optional Metering

max. max. inlet outlets medium(rev./min) (mm /stroke

(bar) and outlet)

4010 24 steel galv. 25 - 105MX-F 180

3979 60 16 1.4404 45 - 105MX-I

LX-2 3972 180 M10x1 M10x1 steel ZnNi

3973 60 1.4404 200 oils andLX-3

300 1.4401 greases

LX-4 3950 steel ZnNi 50 - 200

SX-1 4000 180 20 steel galv. 68 - 430 up to

3989 G 1/8 G 1/8 NLGI-cl. 2SX-2

4008 1.4301 75 - 470SX-3 60

3983 180 G 3/8 G 1/4 steel galv.SX-5

UX 4005 250 G 1/2 G 3/8 1130 - 2000

MX-F LX-2 / LX-4 LX-3MX-I

SX-1 SX-2 SX-3 UXSX-5Size 1 Size 1 Size 1

Z32VL3 Z33VL6 Z32VL4 Z33VL8 Z32VL5 Z33VL10or or or

Operating Number Metering volume

Model Type pressure of Connection Connection Material optional Metering

max. outlets inlet outlet medium(mm / stroke

(bar) and outlet)

Housing: oils;

4020 45 1 to 6* M16x1,5 M8x1 Zn diecasting 100 - 1000 fluid greaseNV

additional part: NLGI-cl.

brass 000, 00

fluid grease;

4124 300 1 to 12** G 1/4 M10x1 25 - 400 grease up toUEN

steel, ZnNi- NLGI-cl. 2

coating acc. oil;

4126 70 1 to 15 M10x1 pipe 4 to DIN 50979 16 - 50 fluid greaseGVO-1

1/8-27 NPTF pipe 1/8" NLGI-cl.

000, 00

steel, (up to 200 - 1200

1 to 6 3/8-18 NPT 1/8-27 NPT 720 h resistant adjustable fluid grease,BL-1

4125 240 against red rust) grease up to

1 1/2-14 NPTF 1/4-18 NPTF steel, galvanized 1000 - 11000 NLGI-cl. 2BL-11

yellow chromated adjustable

SXE-2 / SXE-2R SXE-3 SXD SXW-1 SXW-2(with return)

No. of revol. Oper. No. of Meterin vol.

Model Type max. press. outlets Connection Connection Material optional Metering

max. max. inlet outlets medium(rev./min) (mm / stroke

(bar) and outlet)

4003 G 1/4 G 1/8SXE-2

3971 300 M11x1 steel, 100 - 760 oils andSXE-2R

SXE-3 3985 G 3/8 G 1/4 galvanized greases

3998 180 200 20 G 3/8 up toSXD

3977 G 1/4 G 1/4 steel, galv., 100 - 900 NGLI-cl. 2SXW-1

3978 150 G 1/2 G 3/8 connec. plate. 900 - 3700SXW-2

aluminium

NV UEN GVO-1 BL-1 BL-112-fold

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

Progressive distributors

Progressive Central Lubrication Systems

Disk construction

Segment construction Sandwich construction

Overview

Pro

gre

ssiv

e d

istr

ibuto

rs

Size Model Outlets Number of Type Connection Connection Material

outlets inlets outlets

one-sided 1 to 12 with or without M8x1 steel, galv.Z32VL1 - Z32VL12

union nut M10x1 or 1.43051

two-sided 2x1 to 2x12 4020 (M10x1, pipe- 6, steel,Z33VL2 - Z33VL24

one-sided 1 to 10 with olive M10x1 galvanized2 Z32VL1/2 - Z32VL10/2

two-sided 2x1 to 2x10Z33VL2/2 - Z33VL20/2

Distributor blocks

Metering elements

Singleline Central Lubrication Systems

Overview

Mete

ring e

lem

ents

01-1

-10-1

2

01-1

-10-1

1

Single line distributors

* no. of outlets can be increased by a connector

** no. of outlet can be increased by a connecting element

Max. no Oper. No. of Metering volume

Mod. Type of revolutions press. outlets Connection Connection Material optional Metering

max. max. inlet outlets medium(rev./min) (mm /stroke

(bar) and outlet)

4010 24 steel galv. 25 - 105MX-F 180

3979 60 16 1.4404 45 - 105MX-I

LX-2 3972 180 M10x1 M10x1 steel ZnNi

3973 60 1.4404 200 oils andLX-3

300 1.4401 greases

LX-4 3950 steel ZnNi 50 - 200

SX-1 4000 180 20 steel galv. 68 - 430 up to

3989 G 1/8 G 1/8 NLGI-cl. 2SX-2

4008 1.4301 75 - 470SX-3 60

3983 180 G 3/8 G 1/4 steel galv.SX-5

UX 4005 250 G 1/2 G 3/8 1130 - 2000

MX-F LX-2 / LX-4 LX-3MX-I

SX-1 SX-2 SX-3 UXSX-5Size 1 Size 1 Size 1

Z32VL3 Z33VL6 Z32VL4 Z33VL8 Z32VL5 Z33VL10or or or

Operating Number Metering volume

Model Type pressure of Connection Connection Material optional Metering

max. outlets inlet outlet medium(mm / stroke

(bar) and outlet)

Housing: oils;

4020 45 1 to 6* M16x1,5 M8x1 Zn diecasting 100 - 1000 fluid greaseNV

additional part: NLGI-cl.

brass 000, 00

fluid grease;

4124 300 1 to 12** G 1/4 M10x1 25 - 400 grease up toUEN

steel, ZnNi- NLGI-cl. 2

coating acc. oil;

4126 70 1 to 15 M10x1 pipe 4 to DIN 50979 16 - 50 fluid greaseGVO-1

1/8-27 NPTF pipe 1/8" NLGI-cl.

000, 00

steel, (up to 200 - 1200

1 to 6 3/8-18 NPT 1/8-27 NPT 720 h resistant adjustable fluid grease,BL-1

4125 240 against red rust) grease up to

1 1/2-14 NPTF 1/4-18 NPTF steel, galvanized 1000 - 11000 NLGI-cl. 2BL-11

yellow chromated adjustable

SXE-2 / SXE-2R SXE-3 SXD SXW-1 SXW-2(with return)

No. of revol. Oper. No. of Meterin vol.

Model Type max. press. outlets Connection Connection Material optional Metering

max. max. inlet outlets medium(rev./min) (mm / stroke

(bar) and outlet)

4003 G 1/4 G 1/8SXE-2

3971 300 M11x1 steel, 100 - 760 oils andSXE-2R

SXE-3 3985 G 3/8 G 1/4 galvanized greases

3998 180 200 20 G 3/8 up toSXD

3977 G 1/4 G 1/4 steel, galv., 100 - 900 NGLI-cl. 2SXW-1

3978 150 G 1/2 G 3/8 connec. plate. 900 - 3700SXW-2

aluminium

NV UEN GVO-1 BL-1 BL-112-fold

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

TDM-FSU TDM-FS 4

Series TDM - drive see table

Overview

Oil lubrication pumps

Oil lubri

cati

on p

um

ps

Multiline Central Lubrication Systems

BV BW BX BY BZ UXZ

Overview

Dualline Central Lubrication Systems

Dual line components

Dual line c

om

ponents

Dual line distributors

For changeover of the main lines For monitoring

changeover

4/3-way 4/2-way Pressure changeover Differentiall press. electronic

control valve control valve switch control device press. sensor

Operating Flow Connection

Component Type Actuation pressure volume main Material Lubricant

line(bar) (l/min)

4340 electrical 400 8 G 1/2 GG-254/3-waycontrol valve

G 3/4

4065 electro-pneumatic 350 20 G 3/8 oils and4/2-waycontrol valve

0421 hydraulic 150 / 300 8 G 1/4 steel, greasesPressure changeover

galvanized up toswitch

4305 NLGI-cl. 2Differential pressure

electric 400 - G 3/8control device

0421 -electron. press. sensor

Operating No. of Metering volume

Model Type pressure outlets Connection Connection Material optional Metering

max. max. inlets outlets medium(mm / stroke

(bar) and outlet)

3981 steel 70 - 300BV

3980 8 G 1/4 galv. 300 - 1500 oils,BW

4235 200 - 1500 fluid grease,BX

400 G 1/4 steel ZnNi (adjustable) grease

4236 (min. 35) 4 or 1.4305 1000 - 15000 up toBY

(adjustable) NLGI-cl. 3

4001 8 G 3/8 steel galv. 250 - 3000BZ

or 1.4305 (adjustable)

4006 150 20 G 3/8 steel galv. 1130 - 2000 NLGI-cl. 2UXZ

01-1

-10-1

4

01-1

-10-1

3

Delivery volume Drive speed Operating Suction

Model Type No. of adjustable, max. Reduction max. pressure height

drive outlets max. max.(cm / stroke (rev / min)

and outlet) (bar) (mm)

2200TDM-FSU

rotating 1 - 2

2201TDM-FSU-M

electric 0-1 33 300 - 1800 3 300

2204TDM-FS 4

rotating 3 - 4

2205TDM-FS 4-M

electric

Delivery volume Drive speed Operating Suction

Model Type No. of adjustable, max. Reduction max. pressure height

outlets max. max.(cm / stroke (r.p.m.)

and outlet) (bar) (mm)

2210TDM 2

rotating 1 - 2

2211TDM 2-M

electric 71,5:1 - 428:1

2212TDM 4

rotating 3 - 4 0,039 - 0,088 500 - 3000 3 / 5 300

2213TDM 4-M

electric

2214TDM 8

rotating 5 - 8 92:1 - 1050:1

2215TDM 8-M

electric

Power consumption: 0,09 / 0,11 kW; available for all pumps of series TDM, see TDM-FSU-M,TDM-M

with motor TDM-FS 4-M, TDM 2-M, TDM 4-M, TDM 8-M

TDM 2 TDM 4 TDM 8 TDM 4-M

230/400 V AC / 3~

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

TDM-FSU TDM-FS 4

Series TDM - drive see table

Overview

Oil lubrication pumps

Oil lubri

cati

on p

um

ps

Multiline Central Lubrication Systems

BV BW BX BY BZ UXZ

Overview

Dualline Central Lubrication Systems

Dual line components

Dual line c

om

ponents

Dual line distributors

For changeover of the main lines For monitoring

changeover

4/3-way 4/2-way Pressure changeover Differentiall press. electronic

control valve control valve switch control device press. sensor

Operating Flow Connection

Component Type Actuation pressure volume main Material Lubricant

line(bar) (l/min)

4340 electrical 400 8 G 1/2 GG-254/3-waycontrol valve

G 3/4

4065 electro-pneumatic 350 20 G 3/8 oils and4/2-waycontrol valve

0421 hydraulic 150 / 300 8 G 1/4 steel, greasesPressure changeover

galvanized up toswitch

4305 NLGI-cl. 2Differential pressure

electric 400 - G 3/8control device

0421 -electron. press. sensor

Operating No. of Metering volume

Model Type pressure outlets Connection Connection Material optional Metering

max. max. inlets outlets medium(mm / stroke

(bar) and outlet)

3981 steel 70 - 300BV

3980 8 G 1/4 galv. 300 - 1500 oils,BW

4235 200 - 1500 fluid grease,BX

400 G 1/4 steel ZnNi (adjustable) grease

4236 (min. 35) 4 or 1.4305 1000 - 15000 up toBY

(adjustable) NLGI-cl. 3

4001 8 G 3/8 steel galv. 250 - 3000BZ

or 1.4305 (adjustable)

4006 150 20 G 3/8 steel galv. 1130 - 2000 NLGI-cl. 2UXZ

01-1

-10-1

4

01-1

-10-1

3

Delivery volume Drive speed Operating Suction

Model Type No. of adjustable, max. Reduction max. pressure height

drive outlets max. max.(cm / stroke (rev / min)

and outlet) (bar) (mm)

2200TDM-FSU

rotating 1 - 2

2201TDM-FSU-M

electric 0-1 33 300 - 1800 3 300

2204TDM-FS 4

rotating 3 - 4

2205TDM-FS 4-M

electric

Delivery volume Drive speed Operating Suction

Model Type No. of adjustable, max. Reduction max. pressure height

outlets max. max.(cm / stroke (r.p.m.)

and outlet) (bar) (mm)

2210TDM 2

rotating 1 - 2

2211TDM 2-M

electric 71,5:1 - 428:1

2212TDM 4

rotating 3 - 4 0,039 - 0,088 500 - 3000 3 / 5 300

2213TDM 4-M

electric

2214TDM 8

rotating 5 - 8 92:1 - 1050:1

2215TDM 8-M

electric

Power consumption: 0,09 / 0,11 kW; available for all pumps of series TDM, see TDM-FSU-M,TDM-M

with motor TDM-FS 4-M, TDM 2-M, TDM 4-M, TDM 8-M

TDM 2 TDM 4 TDM 8 TDM 4-M

230/400 V AC / 3~

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

C 1,5 CS 3 CS 3

oscillating rotating oscillating

CCS 3 CCS 6 CC 30 CCS 30

rotating oscillating rotating oscillating

Oil lubrication pumps

Oil lubri

cati

on p

um

ps

Overview

Multiline Central Lubrication Systems

Oil lubrication pumps

Oil lubri

cati

on p

um

ps

Overview

Multiline Central Lubrication Systems

Out- Deliv. volume Res. Max.

Model Drive Type lets adjustable, max. capa- Reduction Max. operating

max. city input speed pressure(cm / stroke

and outlet) (l) (r.p.m.) (bar)

rotating 2300 12 12/18/36 or 72:1 500/ 750/ 1400/ 2600C 1,5

oscillating 2301 1:1 / 3,15:1 40 / 125

rotating 2302 6 12/18/36 or 72:1 500/ 750/ 1400/ 2600CS 1,5

oscillating 2303 1,8 1:1 / 3,15:1 40 / 125

rotating 2310 12 3 12/18/36 or 72:1 500/ 750/ 1400/ 2600C 3

oscillating 2311 1:1 / 3,15:1 40 / 125

rotating 2312 6 12/18/36 or 72:1 500/ 750/ 1400/ 2600CS 3

oscillating 2313 1:1 / 3,15:1 40 /125

rotating 2320 24 12/18/36 or 72:1 500/ 750/ 1400/ 2600CC 3

oscillating 2321 1:1 / 3,15:1 40 / 125

rotating 2322 12 12/18/36 or 72:1 500/ 750/ 1400/ 2600CCS 3

oscillating 2323 0,15 3 1:1 / 3,15:1 40 / 125 50

rotating 2340 24 6 12/18/36 or 72:1 500/ 750/ 1400/ 2600CC 6

oscillating 2341 1:1 / 3,15:1 40 / 125

rotating 2342 12 12/18/36 or 72:1 500/ 750/ 1400/ 2600CCS 6

oscillating 2343 1:1 / 3,15:1 40 / 125

rotating 2360 48 12/18/36 or 72:1 500/ 750/ 1400/ 2600CC 30

oscillating 2361 1:1 / 3,15:1 40 / 125

oscillating 2362 24 30 1:1 / 3,15:1 40 / 125CCS 30

rotating 2363 12/18/36 or 72:1 500/ 750/ 1400/ 2600

with motor 2364 48 80/120/180/240/ 1500/ 1800CC 30 M

400 V AC/3~ 2368 24 360 or 720:1CCS 30 M

01-1

-10-1

6

01-1

-10-1

5

Series C - drive see tableSeries A - drive see table

Series D - drive see table

Delivery volume Operating Suction

Model Type Outlets adjustable, max. Reduction Input speed pressure height

drive max. max. max. max.(cm / stroke

and outlet) (U / min) (bar) (mm)

2260 12:1 / 18:1 / 36:1 500 - 750DU

rotating

2262 2:1 80DP

oscillating

2266 80:1 / 160:1 / 2500DG

rotating 12 0,15 320:1 / 640:1 50 1000

2268 160:1 / 320:1 / 640:1 2500DFG

rotating

2270 80:1 / 160:1 / Power demandDFG-M

electric 320:1 / 640:1 0,25 kW

Delivery volume Operating Suction

Model Type Outlets adjustable, max. Reduction Input speed pressure height

drive max. max. max. max.(cm / stroke

and outlet) (rev / min) (bar) (mm)

2240 8:1 / 16:1 200 / 400AZU

rotating 25:1 / 50:1 600 / 1300

2242 1:1 40AZP

oscillating

2244 18:1 / 25:1 / 500 / 600 /AF

rotating 12 0,06 36:1 1400 10 500

2248 80:1 / 160:1 / 2400AFG

rotating 320:1 / 640:1 2800

2250 50:1 / 80:1 / 160:1 / 1500 / 1800AFG-M

electric 320:1 / 640:1

APG-M 2243 400:1 / 288:1 2900 / 3000

electric

AZU AZP AF AFG AFG-M APG-M

400 V AC / 3~ DC

DU DP DG DFG DFG-M

400 V AC / 3~

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

C 1,5 CS 3 CS 3

oscillating rotating oscillating

CCS 3 CCS 6 CC 30 CCS 30

rotating oscillating rotating oscillating

Oil lubrication pumps

Oil lubri

cati

on p

um

ps

Overview

Multiline Central Lubrication Systems

Oil lubrication pumps

Oil lubri

cati

on p

um

ps

Overview

Multiline Central Lubrication Systems

Out- Deliv. volume Res. Max.

Model Drive Type lets adjustable, max. capa- Reduction Max. operating

max. city input speed pressure(cm / stroke

and outlet) (l) (r.p.m.) (bar)

rotating 2300 12 12/18/36 or 72:1 500/ 750/ 1400/ 2600C 1,5

oscillating 2301 1:1 / 3,15:1 40 / 125

rotating 2302 6 12/18/36 or 72:1 500/ 750/ 1400/ 2600CS 1,5

oscillating 2303 1,8 1:1 / 3,15:1 40 / 125

rotating 2310 12 3 12/18/36 or 72:1 500/ 750/ 1400/ 2600C 3

oscillating 2311 1:1 / 3,15:1 40 / 125

rotating 2312 6 12/18/36 or 72:1 500/ 750/ 1400/ 2600CS 3

oscillating 2313 1:1 / 3,15:1 40 /125

rotating 2320 24 12/18/36 or 72:1 500/ 750/ 1400/ 2600CC 3

oscillating 2321 1:1 / 3,15:1 40 / 125

rotating 2322 12 12/18/36 or 72:1 500/ 750/ 1400/ 2600CCS 3

oscillating 2323 0,15 3 1:1 / 3,15:1 40 / 125 50

rotating 2340 24 6 12/18/36 or 72:1 500/ 750/ 1400/ 2600CC 6

oscillating 2341 1:1 / 3,15:1 40 / 125

rotating 2342 12 12/18/36 or 72:1 500/ 750/ 1400/ 2600CCS 6

oscillating 2343 1:1 / 3,15:1 40 / 125

rotating 2360 48 12/18/36 or 72:1 500/ 750/ 1400/ 2600CC 30

oscillating 2361 1:1 / 3,15:1 40 / 125

oscillating 2362 24 30 1:1 / 3,15:1 40 / 125CCS 30

rotating 2363 12/18/36 or 72:1 500/ 750/ 1400/ 2600

with motor 2364 48 80/120/180/240/ 1500/ 1800CC 30 M

400 V AC/3~ 2368 24 360 or 720:1CCS 30 M

01-1

-10-1

6

01-1

-10-1

5

Series C - drive see tableSeries A - drive see table

Series D - drive see table

Delivery volume Operating Suction

Model Type Outlets adjustable, max. Reduction Input speed pressure height

drive max. max. max. max.(cm / stroke

and outlet) (U / min) (bar) (mm)

2260 12:1 / 18:1 / 36:1 500 - 750DU

rotating

2262 2:1 80DP

oscillating

2266 80:1 / 160:1 / 2500DG

rotating 12 0,15 320:1 / 640:1 50 1000

2268 160:1 / 320:1 / 640:1 2500DFG

rotating

2270 80:1 / 160:1 / Power demandDFG-M

electric 320:1 / 640:1 0,25 kW

Delivery volume Operating Suction

Model Type Outlets adjustable, max. Reduction Input speed pressure height

drive max. max. max. max.(cm / stroke

and outlet) (rev / min) (bar) (mm)

2240 8:1 / 16:1 200 / 400AZU

rotating 25:1 / 50:1 600 / 1300

2242 1:1 40AZP

oscillating

2244 18:1 / 25:1 / 500 / 600 /AF

rotating 12 0,06 36:1 1400 10 500

2248 80:1 / 160:1 / 2400AFG

rotating 320:1 / 640:1 2800

2250 50:1 / 80:1 / 160:1 / 1500 / 1800AFG-M

electric 320:1 / 640:1

APG-M 2243 400:1 / 288:1 2900 / 3000

electric

AZU AZP AF AFG AFG-M APG-M

400 V AC / 3~ DC

DU DP DG DFG DFG-M

400 V AC / 3~

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

P-2663 P-2669

EHS 0,6 / EHS 0,15 S55

HP-2122

Model Type Outlets Delivery volume max. Operating pressure Drive pressure

max. max.(cm/stroke and outlet) (bar) (bar)

2122 10 2 / 3 / 4,5 / 6 / 7,5 200 60 - 200HP-2122

Model Type Outlets Delivery volume max. Reservoir Reservoir Pressure Drive

max. capacity material ratio press.(cm / stroke and outlet) (l) (bar)

2663 0,025 0,5P-2663

2664 5 1,2 plastic 1:20P-2664

2669 0,010 0,5 6 - 10P-2669

2686 4 0,005 - 0,015 1:84P-2686

0,025 - 0,050 - - 1:47

2685 1 10 1:20PAU

Oil lubrication pumps

Overview

Oil lubri

cati

on p

um

ps

Multiline Central Lubrication Systems

Series OKG - electric drive

OKGGM-OC OKGGM-OC OKGM-OC OKGGM-EP OKGGM-EP OKGM-EP

DC with PSU, 400 V AC / 3 DC with PSU, 400 V AC / 3~ ~

115 or 230 V AC 115 or 230 V AC

Delivery Reser. Input Pump

Out- volume content Reduction speed speed Press. Operating

Model Type lets max. motor / shaft 1 rev. = max. voltage(kg)

max. 1 stroke(cm / stroke ( / min) (bar)rev.

and outlet) rev.( / min)

2035 12 V DCOKGGM-OC

0,005 - - 15 24 V DC

2029 0,010 115 V ACOKGGM-OC

with PSU 21 0,015 200 230 V AC

0,025 80:1 150:1 1350 at 50 Hz 400 V AC // /

2017 0,050 2,5 300:1 400:1 1600 at 60 Hz - 3~OKGM-OC / /

4,2 600:1 1200:1/

2040 8,0 12 V DCOKGGM-EP

3 - - 15 24 V DC

2038 0,06 115 V ACOKGGM-EP

with PSU 0,12 350** 230 V AC

0,17 (80:1)* 150:1 1350 at 50 Hz 400 V AC // /

2011 6 300:1 400:1 1600 at 60 Hz - 3~OKGM-EP / /

600:1 1200:1/

Oil lubrication pumps

Overview

Oil lubri

cati

on p

um

ps

* Special request after consultation

** Pressure limiting valve adjusted to 280 bar,

PSU= power supply unit

Multiline Central Lubrication Systems

Model Type Outlets Delivery volume max. Operating press. Suct. height

max. max. max.(cm / stroke and outlet) (bar) (mm)

2140 4 0,15 12 300EHS 0,6

2141EHS 0,15 S55

2605 1 0,56 80 -SP 0,56

1,12SP 1,12

01-1

-10-1

8

01-1

-10-1

7

Electro magnetic drive

K-407 K-412 K-442 K-400 MP-2646or

Model Type Outlets Delivery volume max. Reservoir Reservoir Duty Operating

capacity material ratio voltage(cm / stroke and outlet) (l)

2652 0,75 plasticK-407

2653 1,2K-412

2640 4,2 plastic, 40 % 24 V DCK-442

1 - 6 0,040 transparent

2654 0,100K-400

2641 without - 230 V AC

2646 reservoir 25 % 24 V DCMP-2646

180 V DC

Pneumatic drive

Mechanic drive

Hydraulic drive

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

P-2663 P-2669

EHS 0,6 / EHS 0,15 S55

HP-2122

Model Type Outlets Delivery volume max. Operating pressure Drive pressure

max. max.(cm/stroke and outlet) (bar) (bar)

2122 10 2 / 3 / 4,5 / 6 / 7,5 200 60 - 200HP-2122

Model Type Outlets Delivery volume max. Reservoir Reservoir Pressure Drive

max. capacity material ratio press.(cm / stroke and outlet) (l) (bar)

2663 0,025 0,5P-2663

2664 5 1,2 plastic 1:20P-2664

2669 0,010 0,5 6 - 10P-2669

2686 4 0,005 - 0,015 1:84P-2686

0,025 - 0,050 - - 1:47

2685 1 10 1:20PAU

Oil lubrication pumps

Overview

Oil lubri

cati

on p

um

ps

Multiline Central Lubrication Systems

Series OKG - electric drive

OKGGM-OC OKGGM-OC OKGM-OC OKGGM-EP OKGGM-EP OKGM-EP

DC with PSU, 400 V AC / 3 DC with PSU, 400 V AC / 3~ ~

115 or 230 V AC 115 or 230 V AC

Delivery Reser. Input Pump

Out- volume content Reduction speed speed Press. Operating

Model Type lets max. motor / shaft 1 rev. = max. voltage(kg)

max. 1 stroke(cm / stroke ( / min) (bar)rev.

and outlet) rev.( / min)

2035 12 V DCOKGGM-OC

0,005 - - 15 24 V DC

2029 0,010 115 V ACOKGGM-OC

with PSU 21 0,015 200 230 V AC

0,025 80:1 150:1 1350 at 50 Hz 400 V AC // /

2017 0,050 2,5 300:1 400:1 1600 at 60 Hz - 3~OKGM-OC / /

4,2 600:1 1200:1/

2040 8,0 12 V DCOKGGM-EP

3 - - 15 24 V DC

2038 0,06 115 V ACOKGGM-EP

with PSU 0,12 350** 230 V AC

0,17 (80:1)* 150:1 1350 at 50 Hz 400 V AC // /

2011 6 300:1 400:1 1600 at 60 Hz - 3~OKGM-EP / /

600:1 1200:1/

Oil lubrication pumps

Overview

Oil lubri

cati

on p

um

ps

* Special request after consultation

** Pressure limiting valve adjusted to 280 bar,

PSU= power supply unit

Multiline Central Lubrication Systems

Model Type Outlets Delivery volume max. Operating press. Suct. height

max. max. max.(cm / stroke and outlet) (bar) (mm)

2140 4 0,15 12 300EHS 0,6

2141EHS 0,15 S55

2605 1 0,56 80 -SP 0,56

1,12SP 1,12

01-1

-10-1

8

01-1

-10-1

7

Electro magnetic drive

K-407 K-412 K-442 K-400 MP-2646or

Model Type Outlets Delivery volume max. Reservoir Reservoir Duty Operating

capacity material ratio voltage(cm / stroke and outlet) (l)

2652 0,75 plasticK-407

2653 1,2K-412

2640 4,2 plastic, 40 % 24 V DCK-442

1 - 6 0,040 transparent

2654 0,100K-400

2641 without - 230 V AC

2646 reservoir 25 % 24 V DCMP-2646

180 V DC

Pneumatic drive

Mechanic drive

Hydraulic drive

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

Grease lubrication pumps

Gre

ase lubri

cati

on p

um

ps

Overview

Multiline Central Lubrication Systems

Grease lubrication pumps

Overview

Gre

ase lubri

cati

on p

um

ps

Multiline Central Lubrication Systems

01-1

-10-2

0

01-1

-10-1

9

Series FK - drive see table

FKR FKP FKG FKG-V FKG-S FKG-A

rotating oscillating rotating rotating rotating rotating

vertical pivotable by 90 vertical vertical

Delivery volume Reser. Press.

Model Type Outlets adjustable, max. capacity Reduction Input speed max.

drive max. (cm / stroke (rev / min) (bar)

and outlet) (kg)

2000 14:1 / 19:1 / min.: 28/38/56/114FKR

rotating 28:1 / 57:1 max.: 210/300/430/850

2001 3,5:1 35FKP

oscillating

2002 84:1 / 150:1 /FKG

rotating vertical 1 300:1 / 400:1 /

12 0,1 1,5 600:1 / 1200:1 50

2004 2FKG-V

rotating 4 84:1 / 150:1 / 300 - 2800

pivotable by 90 300:1 / 400:1 /

2005 600:1 / 1200:1FKG-S

rotating vertical

2006 8 300:1 / 450:1 /FKG-A

rotating vertical 900:1

PICO - electric drive

Out- Deliv. volume Reservoir Pump speed Operating Operating

Model Type lets max. capacity System 1 rev. = 1 stroke press. max. voltage(cm / stroke

max. typeand outlet) (kg) (rev. / min) (bar)

0,005 / 0,010 /

2185 8 0,015 / 0,025 / 1,2 multi line 200 12 V DCPICO 15

0,05 24 V DC

2 0,12 progressive 280

FKGM FKMS FVAM

with motor with motor with motor

Series FK and FVAM - electric drive

Out- Delivery volume Reservoir Input Operating Operating

Model Type lets adjustable, max. capacity Reduction speed press. max. voltage

max. (cm/h and outlet) (kg) (rev / min) (bar)

2007 1 84:1 / 150:1 / 1420 230 / 400FKGM

with motor 12 0,1 1,5 300:1 / 400:1 / at 50 Hz 50 V AC / 3~

2008 2 600:1 / 1200:1 400 V AC /FKMS

with motor 4 1700 3~

2030 8 0,15 1 / 1,5 / 420:1 / 560:1 / at 60 Hz 100 230 / 400FVAM

with motor 2 / 4 / 10 750:1 V AC / 3~

FKGGM-OC FKGGM-OC FKGM-OC FKGGM-EP FKGGM-EP FKGGM-EPC

DC with PSU, 400 V AC / 3 DC with PSU, with control,~

115 or 230 V AC 115 or 230 V AC 100 to 250 V AC

Max. Res. Drive Pump

Max. delivery capa- Reduction speed speed Max. Operating

Model Type outlets volume city motor / shaft 1 rev. = press. voltage

(cm / stroke (kg) (r ) (bar)1 stroke.p.m.

and outlet) r.p.m.( )

2154 12 V DCFKGGM-OC

0,005 - - 15 24 V DC

2024 0,010 115 V ACFKGGM-OC

with PSU 21 0,015 200 230 V AC

0,025 80:1 150:1 1350 at 50 Hz 400 V AC // /

2016 0,050 1,9 300:1 400:1 1600 at 60 Hz - 3~FKGM-OC / /

2,5 600:1 1200:1/

2018 4,2 12 V DCFKGGM-EP

8,0 24 V DC

2037 3 0,06 - 0,17 - - 15 350 ** 115 V ACFKGGM-EP

with PSU 230 V AC

2036 100 V toFKGGM-EPC

with control 250 V AC

** Pressure limiting valve adjusted to 280 bar

Series FK...-OC / FK...-EP - Drive electric or rotating

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

Grease lubrication pumps

Gre

ase lubri

cati

on p

um

ps

Overview

Multiline Central Lubrication Systems

Grease lubrication pumps

Overview

Gre

ase lubri

cati

on p

um

ps

Multiline Central Lubrication Systems01-1

-10-2

0

01-1

-10-1

9

Series FK - drive see table

FKR FKP FKG FKG-V FKG-S FKG-A

rotating oscillating rotating rotating rotating rotating

vertical pivotable by 90 vertical vertical

Delivery volume Reser. Press.

Model Type Outlets adjustable, max. capacity Reduction Input speed max.

drive max. (cm / stroke (rev / min) (bar)

and outlet) (kg)

2000 14:1 / 19:1 / min.: 28/38/56/114FKR

rotating 28:1 / 57:1 max.: 210/300/430/850

2001 3,5:1 35FKP

oscillating

2002 84:1 / 150:1 /FKG

rotating vertical 1 300:1 / 400:1 /

12 0,1 1,5 600:1 / 1200:1 50

2004 2FKG-V

rotating 4 84:1 / 150:1 / 300 - 2800

pivotable by 90 300:1 / 400:1 /

2005 600:1 / 1200:1FKG-S

rotating vertical

2006 8 300:1 / 450:1 /FKG-A

rotating vertical 900:1

PICO - electric drive

Out- Deliv. volume Reservoir Pump speed Operating Operating

Model Type lets max. capacity System 1 rev. = 1 stroke press. max. voltage(cm / stroke

max. typeand outlet) (kg) (rev. / min) (bar)

0,005 / 0,010 /

2185 8 0,015 / 0,025 / 1,2 multi line 200 12 V DCPICO 15

0,05 24 V DC

2 0,12 progressive 280

FKGM FKMS FVAM

with motor with motor with motor

Series FK and FVAM - electric drive

Out- Delivery volume Reservoir Input Operating Operating

Model Type lets adjustable, max. capacity Reduction speed press. max. voltage

max. (cm/h and outlet) (kg) (rev / min) (bar)

2007 1 84:1 / 150:1 / 1420 230 / 400FKGM

with motor 12 0,1 1,5 300:1 / 400:1 / at 50 Hz 50 V AC / 3~

2008 2 600:1 / 1200:1 400 V AC /FKMS

with motor 4 1700 3~

2030 8 0,15 1 / 1,5 / 420:1 / 560:1 / at 60 Hz 100 230 / 400FVAM

with motor 2 / 4 / 10 750:1 V AC / 3~

FKGGM-OC FKGGM-OC FKGM-OC FKGGM-EP FKGGM-EP FKGGM-EPC

DC with PSU, 400 V AC / 3 DC with PSU, with control,~

115 or 230 V AC 115 or 230 V AC 100 to 250 V AC

Max. Res. Drive Pump

Max. delivery capa- Reduction speed speed Max. Operating

Model Type outlets volume city motor / shaft 1 rev. = press. voltage

(cm / stroke (kg) (r ) (bar)1 stroke.p.m.

and outlet) r.p.m.( )

2154 12 V DCFKGGM-OC

0,005 - - 15 24 V DC

2024 0,010 115 V ACFKGGM-OC

with PSU 21 0,015 200 230 V AC

0,025 80:1 150:1 1350 at 50 Hz 400 V AC // /

2016 0,050 1,9 300:1 400:1 1600 at 60 Hz - 3~FKGM-OC / /

2,5 600:1 1200:1/

2018 4,2 12 V DCFKGGM-EP

8,0 24 V DC

2037 3 0,06 - 0,17 - - 15 350 ** 115 V ACFKGGM-EP

with PSU 230 V AC

2036 100 V toFKGGM-EPC

with control 250 V AC

** Pressure limiting valve adjusted to 280 bar

Series FK...-OC / FK...-EP - Drive electric or rotating

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

Grease lubrication pumps

Gre

ase lubri

cati

on p

um

ps

Overview

Grease lubrication pumps

Overview

Gre

ase lubri

cati

on p

um

ps

Multiline Central Lubrication SystemsMultiline Central Lubrication Systems

01-1

-10-2

2

01-1

-10-2

1

Series F - drive see table

F6 F6 F-super F-super F-super 3 F-super 3

rotating with geared motor with geared motor rotating with geared motor rotating

Delivery Reserv. Input Pump

Model Out- volume capacity Reduction speed speed Press. Operating

drive Type lets max. motor / shaft 1 rev. = max. voltage(kg)

max. 1 stroke(cm / stroke (rev. / min) (bar)

and outlet) rev.( / min)

F6 2032 9:1 / 18:1 / min. 1

rotating 25:1 / 36:1 / - max. 25 -

50:1

5 135:1 / 270:1 /

20 7,5 375:1 / 450:1 /F6

w. geared 2034 10 540:1 / 600:1 / 2800 at 50 Hz

motor 0,06 750:1 / 900:1 / 3300 at 60 Hz

/0,12 1250:1 1800:1/ - 250 230 / 400

0,17 2500:1 V AC / 3~

88:1 / 165:1 /F-super

w. geared 2050 280:1 / 410:1 / 1420 at 50 Hz

motor 600:1 / 800:1 / 1700 at 60 Hz

21 1000:1

5 15:1 / 22,5:1 / min. 1F-super

rotating 2051 10 45:1 - max. 25 -

oscillating 2052 20 2,5:1

48 1420 at 50 Hz 230 / 400F-super 3

w. geared 2053 3 100 46:1 1700 at 60 Hz - V AC / 3~

motor (4= 0,56 400

Special 15:1 / 22,5:1 / min. 1F-super 3

rotating 2054 version 45:1 - max. 25 -

oscillating 2055 2,5:1

FKGM-EP FKGM-EP FKG-EP FKR-EP

400 V AC / 3 with norm motor, rotating, with flange 56 C rotating~

400 V AC / 3 acc. to NEMA (USA)~

Max. Res. Drive Pump

Max. delivery capa- Reduction speed speed Max. Operating

Model Type outlets volume city motor / shaft 1 rev. = press. voltage

(cm / stroke (kg) (r ) (bar)1 stroke.p.m.

and outlet) r.p.m.( )

2013 6 1,9/ 2,5/ 1350 at 50 HzFKGM-EP

4,2 / 8,0 1600 at 60 Hz 400 V AC /

FKGM-EP (80:1)* 150:1 1500 at 50 Hz - 3/ / ~

with standard 1,9 300:1 400:1 1800 at 60 Hz/ /

motor 2014 8 2,5 600:1 1200:1/

with 0,06 - 0,17 4,2 350**FKG-EP

flange 56 C 8,0

acc. to NEMA - min. 1 -

rotating (2 / 4 max. 25

2015 7 steel) 14:1 / 19:1 /FKR-EP

rotating 28:1 / 57:1

* special requests after consultation ** Pressure limiting valve adjusted to 280 bar

Series FK...-OC / FK...-EP - Drive electric or rotating (continuation)

Max. Res. Pump

Model Max. delivery capa- Lubrication Control speed Max. Operating

drive Type outlets volume city system 1 rev. = press. voltage

(cm / (kg) (bar)stroke 1 stroke

and outlet) r.pm.( )

GIGA 2172A 0,12 / 0,25 without

4 p e GIGA-tronicrogressiv

2172P 3 8 GIGA-multitronic 17 300 * 24 V DC

2172S 0,25 16 sectional GIGA-multitronicGIGA PLUS

2172E single line without

dual line2172Z GIGA-multitronic

Series GIGA / GIGA PLUS - Electric drive

(DC) (DC) (DC)GIGA PLUS GIGA PLUS GIGA PLUS

4 kg reservoir 8 kg reservoir 16 kg reservoir

without control GIGA-tronic control GIGA-multitronic control

* Pressure limiting valve adjusted to 280 bar

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

Grease lubrication pumps

Gre

ase lubri

cati

on p

um

ps

Overview

Grease lubrication pumps

Overview

Gre

ase lubri

cati

on p

um

ps

Multiline Central Lubrication SystemsMultiline Central Lubrication Systems01-1

-10-2

2

01-1

-10-2

1

Series F - drive see table

F6 F6 F-super F-super F-super 3 F-super 3

rotating with geared motor with geared motor rotating with geared motor rotating

Delivery Reserv. Input Pump

Model Out- volume capacity Reduction speed speed Press. Operating

drive Type lets max. motor / shaft 1 rev. = max. voltage(kg)

max. 1 stroke(cm / stroke (rev. / min) (bar)

and outlet) rev.( / min)

F6 2032 9:1 / 18:1 / min. 1

rotating 25:1 / 36:1 / - max. 25 -

50:1

5 135:1 / 270:1 /

20 7,5 375:1 / 450:1 /F6

w. geared 2034 10 540:1 / 600:1 / 2800 at 50 Hz

motor 0,06 750:1 / 900:1 / 3300 at 60 Hz

/0,12 1250:1 1800:1/ - 250 230 / 400

0,17 2500:1 V AC / 3~

88:1 / 165:1 /F-super

w. geared 2050 280:1 / 410:1 / 1420 at 50 Hz

motor 600:1 / 800:1 / 1700 at 60 Hz

21 1000:1

5 15:1 / 22,5:1 / min. 1F-super

rotating 2051 10 45:1 - max. 25 -

oscillating 2052 20 2,5:1

48 1420 at 50 Hz 230 / 400F-super 3

w. geared 2053 3 100 46:1 1700 at 60 Hz - V AC / 3~

motor (4= 0,56 400

Special 15:1 / 22,5:1 / min. 1F-super 3

rotating 2054 version 45:1 - max. 25 -

oscillating 2055 2,5:1

FKGM-EP FKGM-EP FKG-EP FKR-EP

400 V AC / 3 with norm motor, rotating, with flange 56 C rotating~

400 V AC / 3 acc. to NEMA (USA)~

Max. Res. Drive Pump

Max. delivery capa- Reduction speed speed Max. Operating

Model Type outlets volume city motor / shaft 1 rev. = press. voltage

(cm / stroke (kg) (r ) (bar)1 stroke.p.m.

and outlet) r.p.m.( )

2013 6 1,9/ 2,5/ 1350 at 50 HzFKGM-EP

4,2 / 8,0 1600 at 60 Hz 400 V AC /

FKGM-EP (80:1)* 150:1 1500 at 50 Hz - 3/ / ~

with standard 1,9 300:1 400:1 1800 at 60 Hz/ /

motor 2014 8 2,5 600:1 1200:1/

with 0,06 - 0,17 4,2 350**FKG-EP

flange 56 C 8,0

acc. to NEMA - min. 1 -

rotating (2 / 4 max. 25

2015 7 steel) 14:1 / 19:1 /FKR-EP

rotating 28:1 / 57:1

* special requests after consultation ** Pressure limiting valve adjusted to 280 bar

Series FK...-OC / FK...-EP - Drive electric or rotating (continuation)

Max. Res. Pump

Model Max. delivery capa- Lubrication Control speed Max. Operating

drive Type outlets volume city system 1 rev. = press. voltage

(cm / (kg) (bar)stroke 1 stroke

and outlet) r.pm.( )

GIGA 2172A 0,12 / 0,25 without

4 p e GIGA-tronicrogressiv

2172P 3 8 GIGA-multitronic 17 300 * 24 V DC

2172S 0,25 16 sectional GIGA-multitronicGIGA PLUS

2172E single line without

dual line2172Z GIGA-multitronic

Series GIGA / GIGA PLUS - Electric drive

(DC) (DC) (DC)GIGA PLUS GIGA PLUS GIGA PLUS

4 kg reservoir 8 kg reservoir 16 kg reservoir

without control GIGA-tronic control GIGA-multitronic control

* Pressure limiting valve adjusted to 280 bar

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

Grease lubrication pumps

Gre

ase lubri

cati

on p

um

ps

Overview

Multiline Central Lubrication Systems

Grease lubrication pumps

Overview

Gre

ase lubri

cati

on p

um

ps

Multiline Central Lubrication Systems

Pneumatic drive

P2103 PP-1

Hydraulic drive

01-1

-10-2

4

01-1

-10-2

3

Mechanic drive

Elctro-magnetic drive

FHX-2 FH-2535 FHX FHX-MX

Model Type Outlets Delivery volume max. Reservoir Reservoir Duty Operating

max. capacity material ratio voltage(cm / stroke and outlet) (l)

2643 1 - 6 0,015 / 0,025 / 0,035 0,4 plastic, 25 % 24 V DCMP-2643

transparent

Model Type Outlets Delivery volume Reserv. capacity Reservoir Pressure

max. material max.(cm / stroke) (l) (bar)

2534 1 1,5 1,2 plastic, 300FHX-2

3 transparent 150

2535 1 1,5 1 / 1,5 / 2 / 3 / 4 steel 300FH-2535

3 (kg) 150

400FHX

(w. progre. 2081 1 2 0,4 (kg) cartridge 300FHX-MX

distributor MX-F)

* pressure limiting valve adjusted to 280 bar

** at drive pressure 8 bar

Out- Delivery volume Reservoir Reservoir Pressure Drive

Model Type lets max. capacity material Drive ratio pressure(cm / stroke

max. and outlet) (kg) (bar)

2 1,2 plastic, 1:32 250**

2103 1 4 transparent 1:18 140** 4 - 8P-2103

6 1 / 1,5 / 2 / 3 / 4 steel 1:10 80**

1,9 / 2,5 / plastic,

2153 3 0,06 - 0,17 4,2 / 8 transparent - 350* 6 - 10PP-1

2 / 4 steel

FKGM-HP1 HP-2369 HKP-1 HPM-2 HPH-2

Model Type Out- Delivery vol. Reservoir Reservoir Operating Drive

lets capacity material press. max. pressure(cm/stroke and

outlet) (kg) (bar) (bar)

2163 1 - 6 0,06 - 0,17 1,9 / 2,5 / 4 / 8 plastic, transparent 350* 30** - 250FKGM-HP1

2 / 4 steel

HP-2369 2104 1 1 / 2 / 3 / 4 / 6 1,2 plastic, transparent 280* 25 - 160

1 / 1,5 / 2 / 3 / 4 steel

2120 2 1 2,5 plastic, transparent (min. 60) - 250 85 - 275HKP-1

2574 1 0,2 - 2,0 0,4 cartridge 100 - 220 130 - 250HPM-2

2574 0,1 - 1,0 250 - 350 from 100HPH-2

* pressure limiting valve adjusted to 280 bar

** min. drive pressure depends on counterpressure of lubrication system

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

Grease lubrication pumps

Gre

ase lubri

cati

on p

um

ps

Overview

Multiline Central Lubrication Systems

Grease lubrication pumps

Overview

Gre

ase lubri

cati

on p

um

ps

Multiline Central Lubrication Systems

Pneumatic drive

P2103 PP-1

Hydraulic drive

01-1

-10-2

4

01-1

-10-2

3

Mechanic drive

Elctro-magnetic drive

FHX-2 FH-2535 FHX FHX-MX

Model Type Outlets Delivery volume max. Reservoir Reservoir Duty Operating

max. capacity material ratio voltage(cm / stroke and outlet) (l)

2643 1 - 6 0,015 / 0,025 / 0,035 0,4 plastic, 25 % 24 V DCMP-2643

transparent

Model Type Outlets Delivery volume Reserv. capacity Reservoir Pressure

max. material max.(cm / stroke) (l) (bar)

2534 1 1,5 1,2 plastic, 300FHX-2

3 transparent 150

2535 1 1,5 1 / 1,5 / 2 / 3 / 4 steel 300FH-2535

3 (kg) 150

400FHX

(w. progre. 2081 1 2 0,4 (kg) cartridge 300FHX-MX

distributor MX-F)

* pressure limiting valve adjusted to 280 bar

** at drive pressure 8 bar

Out- Delivery volume Reservoir Reservoir Pressure Drive

Model Type lets max. capacity material Drive ratio pressure(cm / stroke

max. and outlet) (kg) (bar)

2 1,2 plastic, 1:32 250**

2103 1 4 transparent 1:18 140** 4 - 8P-2103

6 1 / 1,5 / 2 / 3 / 4 steel 1:10 80**

1,9 / 2,5 / plastic,

2153 3 0,06 - 0,17 4,2 / 8 transparent - 350* 6 - 10PP-1

2 / 4 steel

FKGM-HP1 HP-2369 HKP-1 HPM-2 HPH-2

Model Type Out- Delivery vol. Reservoir Reservoir Operating Drive

lets capacity material press. max. pressure(cm/stroke and

outlet) (kg) (bar) (bar)

2163 1 - 6 0,06 - 0,17 1,9 / 2,5 / 4 / 8 plastic, transparent 350* 30** - 250FKGM-HP1

2 / 4 steel

HP-2369 2104 1 1 / 2 / 3 / 4 / 6 1,2 plastic, transparent 280* 25 - 160

1 / 1,5 / 2 / 3 / 4 steel

2120 2 1 2,5 plastic, transparent (min. 60) - 250 85 - 275HKP-1

2574 1 0,2 - 2,0 0,4 cartridge 100 - 220 130 - 250HPM-2

2574 0,1 - 1,0 250 - 350 from 100HPH-2

* pressure limiting valve adjusted to 280 bar

** min. drive pressure depends on counterpressure of lubrication system

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

Type Operating Pressure Volume Material Weight Lubricant

pressure drop flow(bar) (bar) (l/min) (kg)

4060 10 - 250 7 0,1 - 8 steel 1,65 oils

10 - 1000 mm/s

Model Type Oper. pressure Volume Measuring Material Weight Lubricant

max. flow volume(bar) (l/min) (cm) (kg)

steel 0,7 OilsFXE 250

with conn. plate 4063 250 0,05 - 12 1,2 (cover + 0,85 20 - 1000 mm/s

without conn. plate 4064 Al)

Type Operating Pressure Volume Material Weight Lubricant

pressure drop flow(bar) (bar) (l/min) (kg)

4365 5 - 200 5 1,15 - 3,00 steel 0,39 oils ON synt. a. mineral. basis

(without add-ons) (dep. on oriffice disc-) 20 - 600 mm/s

Assessori

es

Accessories

Overview

Circulating Lubrication Systems

Flow control valve

Volume flow control

Flow limiting device

01-1

-10-2

5

Series Pump type Delivery volume Operating pressure

max.(l/min) (bar)

andFLI UI

Connections radial Flange and

and foot pumpsFLIS UIS

Connections at front 4 - 32 100

MZIR

Connections radial Motor pumps

MZI

Connections at front

FLI UI FLIS UIS MZIR MZIand and

Gear

pum

ps

Gear pumps

Overview

Circulating Lubrication Systems

Gear pumps

Internal gear pumps

Flange pumps Foot pump Motor pumps Motor pumps

horizontal vertical

01-1

-10-2

6

Series Pump type Delivery volume Operating pressure

max.(l/min) (bar)

flange pumpsFL 0,5

motor pumps, horizontal 0,06 - 3,00 35MZ 0,5

motor pumps, verticalMZE 0,5

flange pumps 0,25 - 2,40 50FL 0

motor pumps, verticalMZ 0

flange pumpsFL 1 to 5

foot pumps 1 - 65 30U 1 to 5

motor pumps, horizontalMZN 1 to 5

motor pumps, verticalMZE 1 to 5

[email protected]

tel. 0168 371 538fax. 0168 338 329

Wagenmakerij 114762 AV Zevenbergen

BEKA Nederland B.V.

revis

ion: 01.1

5E

N

revis

ion: 01.1

5E

N

Subject to alterations! BEKA 201 All rights reserved!5

1090200384

1090200384

BEKA 201 All rights reserved!5 Subject to alterations!

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

BAIER + KPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]

Type Operating Pressure Volume Material Weight Lubricant

pressure drop flow(bar) (bar) (l/min) (kg)

4060 10 - 250 7 0,1 - 8 steel 1,65 oils

10 - 1000 mm/s

Model Type Oper. pressure Volume Measuring Material Weight Lubricant

max. flow volume(bar) (l/min) (cm) (kg)

steel 0,7 OilsFXE 250

with conn. plate 4063 250 0,05 - 12 1,2 (cover + 0,85 20 - 1000 mm/s

without conn. plate 4064 Al)

Type Operating Pressure Volume Material Weight Lubricant

pressure drop flow(bar) (bar) (l/min) (kg)

4365 5 - 200 5 1,15 - 3,00 steel 0,39 oils ON synt. a. mineral. basis

(without add-ons) (dep. on oriffice disc-) 20 - 600 mm/s

Assessori

es

Accessories

Overview

Circulating Lubrication Systems

Flow control valve

Volume flow control

Flow limiting device

01-1

-10-2

5

Series Pump type Delivery volume Operating pressure

max.(l/min) (bar)

andFLI UI

Connections radial Flange and

and foot pumpsFLIS UIS

Connections at front 4 - 32 100

MZIR

Connections radial Motor pumps

MZI

Connections at front

FLI UI FLIS UIS MZIR MZIand and

Gear

pum

ps

Gear pumps

Overview

Circulating Lubrication Systems

Gear pumps

Internal gear pumps

Flange pumps Foot pump Motor pumps Motor pumps

horizontal vertical

01-1

-10-2

6

Series Pump type Delivery volume Operating p