Product Overview - Gammalux Lighting Systems Internal Blade Baffle Fixtures built with no internal...

G-Beam Series GB25WW-LED-OPWall Wash - Suspended, Surface or Wall Mount

Asymmetric Direct Distribution

Click or scan QR code to viewlatest spec sheet Click photo to view product page

: Overview & NomenclaturePages 2-3: SpecificationsPages 4-5: Photometric Info / DownloadsPage 6: Mounting DetailsPage 8: Custom ProgrammingPages 9-11: Application Guide

Gammalux Lighting Systems reservesthe right to change details of fixturedesigns and construction at any time.

Revision Date: June 26, 2018

Product Overview (for complete specifications, see pages 2 & 3)Upgrade Capability: LED components may be easily upgraded in the field to increase energy efficiency. Simple retrofit can be donewhile fixtures are still installed on site.

Construction: Extruded aluminum housing provides superior fit and finish. Runs of fixtures can be built to match field conditions,including full illuminated patterns.

Continuous Illumination: Optimzed LED arrays provide consistent illumination in custom-length runs and patterns.

Electrical: LED components by major manufacturers. Fixtures can be fitted with integral sensors, control interface devices andspecialty LED components (consult factory). Standard Output, High Output and Custom Output options available.

Optical: LEDs are not visible at any angle. Optional white semi-gloss internal baffle reduces inline glare and striations on adjacent wall.

Standard Nomenclature

* For other than SO or HO, see Custom Programmed Output page. RGB must be High Output and controlled by DMX driver option.** 90+ CRI option has longer lead time and increases wattage by nom. 27%. For RGB, do not select a CRI option. # Sensor By Others, consult factory for suitability.

248 East Arrow Highway, San Dimas, CA 91773 Tel 909.599.9669 | 800.356.3275Fax 909.599.5288 E-mail: [email protected]

Gammalux products comply with ARRA Buy American requirements

1

http://www.gammalux.com

http://www.gammalux.com/Download/DownloadPdfFile?namepath=GB25WWLEDOP.pdf

http://www.gammalux.com/gbeam

http://www.gammalux.com/t/Compliance


Specifications (continued on next page)



ElectricalOutput: Standard (S) and high (H) options deliver a pre-set lumen package (see chart below). Custom-programmed output (C) isspecified as LPF, WPF or % of High Output (see Custom Programmed Output page).Static Driver: Osram Optotronic* programmable driver, wired for static operation (DVR).0-10V Dimming: Osram Optotronic* programmable driver, wired for 0-10v control and dimming to 10% (ZTV10) or to 1% (ZTV1).Step Dimming: Generic step dimming driver, two hot inputs for 100% and 50% output (SD2).DMX Dimming: Generic DMX driver with three loose control wires exiting fixture at power feed location (DMX).DALI Dimming: Generic DALI driver with two loose control wires exiting fixture at power feed location (DALI).Lutron Dimming:Hi-lume LTE dim to 1% 2-wire 120V forward phase (LTEA2W). Hi-Lume dim to 1% EcoSystem with Soft-On, Fade-to-Black (LDE1). 5-Series dim to 5% EcoSystem (LDE5).White Emitter*: Nichia 757G emitters binned within 3 MacAdam ellipses in Osram or Gammalux proprietary array. 90+ CRI option withextended lead time (CRI code 9) results in nom. 27% drop in efficacy; increase calculated wattage by nom. 27%.RGB: Uses two rows of Osram 72618*. RGB with all channels at full output consumes approximately 11 watts per foot.- Red channel at full output will provide approximately the same # of lumens compared to 3,500K white at High Output.- Green channel at full output will provide approximately 171% of lumens compared to 3,500K white at High Output.- Blue channel at full output will provide approximately 35% of lumens compared to 3,500K white at High Output.Battery Pack: Bodine BSL310LP* (BPE). 4W max input, 10W initial output, delivers min. 27% of High Output value per 4' length.LED System: 70% lumen output (L70) at max 85 degrees C calculated at >60k hours. Fixtures are shipped with anti-static gloves tominimize the risk of damage to LEDs during installation. 5 year limited warranty.Upgrade Capability: LED assemblies can be replaced in the future with the latest factory-provided and fully warranted components.On-board sensors, control interface devices and alternate LED components may be specified (consult factory). Max driver crosssection 1.0" x 1.2". Fixtures bear UL & cUL Dry Location label. Damp Location label available (DL).*Subject to availability; may be substituted by Gammalux. Components and specifications may be changed without notice.

7.5 7.2 7.1 6.8 6.6 10.8 10.4 10.2 9.8 9.5

Construction

Housing: Extruded aluminum body 2.00" wide x 5.00" high, 6063T5, 0.070" min thickness. In continuous runs, each housing is 12'max unless longer housings are pre-coordinated with the factory to reduce joints and save installation labor. All fixtures are built perapproved factory drawings and tested as a complete system at the factory. Continuous runs and patterns are ordered, built andshipped with a single item #. Fixtures ordered as individuals are not designed to be joined together in the field.

Joiner System: Automatic alignment, no loose parts, one tool to tighten two factory installed bolts for hairline seam.

Lamping: Runs ordered in Specific Length (Length Option S) may require special lamping components which consume more energythan posted values. Runs ordered in Nominal Length (Option N) may be length-adjusted at the factory to use standard lampingcomponents. Factory drawings will show all dimensions for approval prior to production. Fixtures built to less than 4' may requiremaster/satellite installation - consult factory.

Mounting: Aircraft cable is 7x7 stranded stainless steel with stopper fitting at the top end. Lower end strands are welded and groundfor easy insertion into adjustable cable gripper (C). Feed cord is straight, white 3/C SVT or SJT #18 AWG. Stems are 3/8” schedule 40pipe with top swivels (S). California UBC compliant stems with internal safety cables available (SEQ). Housing can be mounted directto wall (WM). Direct to surface mounting available (SF). Gammalux recommends mounting no less than 18" from the object wall.



2


https://www.osram.us/ds/products/led-fixture-components/power-supplies/constant-current-indoor/p001_ds_product_detail_30.jsp

https://www.osram.us/ds/products/led-fixture-components/power-supplies/constant-current-indoor/p001_ds_product_detail_30.jsp

http://www.lutron.com/TechnicalDocumentLibrary/369543_ENG.pdf



https://www.osram.us/ds/products/led-fixture-components/light-engines/decorative-and-accent/p001_ds_product_detail_16.jsp

http://www.bodine.com/downloads/specs/BSL310LP.spec.L2300228.pdf

http://www.gammalux.com/ConditionsOfUse



Specifications (continued)



Optical

Reflector: Shall be asymmetric extruded aluminum painted high reflectance white.

Dust Cover: Clear acrylic dust cover, snap-in fitting (DC). Multiply delivered lumens by .97.

Internal Baffle: Optional, field removable baffle shall be formed steel, painted white semi-gloss (EBBWSGor FBBWSG). Multiplydelivered lumens by .90.

Finish

Housing is electrostatically sprayed with high solids aliphatic two component polyurethane to an average thickness of 2 mils. over acidetching primer or commercial clear annodizing. Specify H for high gloss or SG for semi-gloss. See Wood Finishes on back page.

Packing and Shipping

Fixtures built for continuous rows and patterns are given a specific location identifier, clearly identified on factory layout drawingsprovided to installing contractor. Location identifier is printed on the fixture's ID Label, protective wrapping and on each end of fixturecarton. Shipping pallets are built with 2" clearance, extending beyond the length and width of cartons, providing shipping protection.

Approx. weight of 4' module is 16 lbs. including carton. Weight of pallet and supplemental packing materials not factored in.

Internal Blade Baffle

Fixtures built with no internal bafle (OP or DC) may create glare for viewers in a corridor and striations on adjacent walls in a wall-to-wall installation.

Internal 2' end baffle (EBB) provides lateral cutoff at fixture ends, reducing striations on adjacent walls in wall-to-wall installations.

Internal full baffle (FBB) provides lateral cutoff throughout the length of the run, reducing glare to viewers in corridors and reducingstriations on adjacent walls in wall-to-wall installations.

By default, baffle is painted white semi-gloss.



3








4

Photometric Reports forSTANDARD OUTPUT FIXTURES




http://www.gammalux.com/Content/Upload/Files/IESfiles/GB25WW1SL358OP.ies.zip

http://www.gammalux.com/content/Upload/Files/Revitfiles/GB25WWLED.rfa.zip





5

Photometric Reports forHIGH OUTPUT FIXTURES




http://www.gammalux.com/Content/Upload/Files/IESfiles/GB25WW1HL358OP.ies.zip

http://www.gammalux.com/content/Upload/Files/Revitfiles/GB25WWLED.rfa.zip

Mounting Details



Factory Drawings: Fully dimensioned factory drawings will be provided upon receipt of purchase order.

Gammalux Lighting Systems reserves the right to change the details of fixture design and construction at any time.



6




Custom Programmed Output





7




Application Guide





8




Application Guide





9




Wood Finishes





10




Product Overview - Gammalux Lighting Systems Internal Blade Baffle Fixtures built with no internal...

Documents

Transcript of Product Overview - Gammalux Lighting Systems Internal Blade Baffle Fixtures built with no internal...