Product Overview - gryphonoilfield.com · and services. We specialize in aggressive well...
Transcript of Product Overview - gryphonoilfield.com · and services. We specialize in aggressive well...
Product Overview
Last date of Revision: 07-07-2018
Gryphon Oilfield Solutions is a worldwide provider of quality, value driven, oilfield products and services. We specialize in aggressive well completions tools, casing equipment and oilfield services and an expertise in conventional and unconventional down-hole technology development. Our main objective is to improve efficiencies and optimize recovery of hydrocarbons in the oil and gas industry. At Gryphon, we place a strong focus on meeting the individual needs of our customers with customized technical solutions. Headquartered in Houston, TX, the Gryphon Oilfield Solutions team is focused on fulfilling our corporate mission of ensuring exceptional value for our customers through superior operations, innovative solutions and complete team commitment.
Table of Contents
Echo Series of Products ……………….…………..……..………….…………………………..……………….…………………….…. 04
Echo DC Multistage Fracturing System ………….………………………...……………………………………………..… 05
Echo DC Cement Wiper Plug …..……….………………………...……..………………………………………………….…… 06
Echo Dissolvable Fracturing Plugs …..……….………………………...……..……………………………………..…..…… 07
TRIDENT Series™ of Products …….…………..……………..……………………….....…………………………………………..… 08
TRIDENT SC Composite Fracturing Plug …………………………………..………….....…………………….……….…. 09
TRIDENT Hybrid Composite Fracturing Plug …………………………..……………………………………..…….…... 10
TRIDENT Total Composite Fracturing Plug …………………………..……………..……..………………...………..…. 11
TRIDENT X Composite Fracturing Plug …………………………..……………..……………………………….…..…….. 12
SUREstack™ Series of Products …….…………………...………………………….………………………………………………… 13
Liner Casing Packer …………………………..…………………………………………..………..……………………….………… 14
Liner Casing Packer Setting Tool ……...………………………..……………………..…………………….………..……….. 15
Latch Seal Unit ………………………………...………………………..……………………..……..…………………………..…….. 16
Locator Seal Unit ………………..…………………..………………………………………..……..………………………..……….. 17
Hold Down Body ……………………………..………………………..………………………...…..………………..………………. 18
Short Open Hole Packer …………………………………..…………….………………....…………………………….…… 19, 20
RC Millable Valve …………………………………………...……………..…………………..………………………….....….. 21, 22
NC Millable Valve ………………..……….………..………………………………………………..………………………….…….. 23
RT Retrievable Ball Actuated Valve ………………..………………..……………..…………………………….......……… 24
Open Hole Anchor …………………………..………………………..………………………...…..………………………….....….. 25
Pressure Actuated Spring Assisted Valve ………………..………………..……………..……………………..…….…… 26
Flow Lock Collar (Ball Actuated Valve) …………………………..…………………..…...…………………..………..…… 27
2 Stage Flow Lock Collar (Ball Actuated Valve) ………………………………..…………...…………………………… 28
Cem Wiper Plug ……………………………..………………………..………..………………..…..…………………………..…….. 29
SUREstart™ Series of Products …….…………………....…………….….………………………..…………………………..…….. 30
SUREstart™ XP Valve …………………………..………………………………...………………..…..………………...…..……... 31
SUREseat Millable Landing Sub ………………………………..…………...…………………………………………….…….. 32
SUREjet Series of Products …….…………...…………..….…………….…………………………..………………………..……….. 33
SUREjet Fracturing System …………………..…………………..………………………..…..………………………..…..…… 34
Abrasive Perforator …………………………..……………………………………………………..…………………….…..…….. 35
SUREjet Packer …………………………..……………………………………………………..…………………………..……..…… 36
Casing Collar Locator …………………..…………………..………………………..…..……………………………..…..………. 37
Perforating Magnet …………………..…………………..………………………..…..……………………………..………..……. 38
SUREstraddle Series of Products …….…………..…………..….…………….………………….………………….……………… 39
SUREstraddle System …………………………..……………………………………………..…………………………..…..……. 40
SUREshift Series of Products …….…………..…………..….…………….…………………….….………………………...…..…… 41
SUREshift RC Valve …………………………..…………………………………………..…….…………………...………..……… 42
SUREshift NC Valve …………………………..…………………………………………..…….…….…………………….……….. 43
SUREshift Shifting Tool …………………………..…………………………………………..…….………………………...…….. 44
Compression Unloader Valve …………………………..………………………………………………………….……..….….. 45
Thru Tubing Products …….……………...………..….…………….……………………………….….…………………………...…….. 46
Thru Tubing WR Plug …………………………..……………………………………...…….…….……………………...…..…….. 47
Gryphon Casing Solution Products …….……………...………..….…………………………….……………….………...…..….. 48
Blue Cap Shoe Track System …………………………..……………………………………...…….…….………..……..…….. 49
Minotaur 10k Float Equipment …………………..…………………..……………………...…………………..………..……. 50
* Contact your local Gryphon Representative for information regarding our available Centralizers, Casing accessories, Standard Float Equipment and Specialized Float Shoes.
Echo Series Products
4
Multistage Fracturing System
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The Echo DC multistage fracturing system is a hydraulic fracturing cartridge and
sleeve system designed for open hole or cemented completions. Each sleeve is
opened by pumping a selective cartridge down to the matching profiles in the
sleeves. The cartridges are fully dissolvable post fracturing, requiring no further
intervention. This system provides full bore access before and after fracturing
operations, allowing higher pump rates and well flow at full potential, without ball
seat restriction or milling operations.
The key feature of the Echo DC multistage fracturing system is the increased
efficiency of combining the full-bore benefits of a plug and perf system with the
speed of a ball drop completion while eliminating the requirement for post
fracturing intervention.
Features and Benefits
• Interventionless system
• Pump down seat / sleeve multistage fracturing system
• Keys on sleeve engage matching profile in cartridge
• Full bore liner for high rate fracturing operations
• Reduced conveyance time
• Fully dissolvable
• No milling required
• Increased stage density
• 54 unique stages available
• All stages have the same differential rating
• 10,000 psi (68 MPa) pressure rating (thread dependent)
Specifications
Size Weight Max.
Body O.D. Max.
Seat I.D. Ball Size
Differential Pressure Rating
in lb/ft in in in psi mm kg/m mm mm mm kPa
4-1/2 15.10 5.900 2.000 2.750
10,000 114.3 22.47 149.86 50.80 69.85
5-1/2 23.00 7.000 2.750 3.500 68,948 114.3 34.23 177.80 69.85 88.90
5
Echo DC Cement Wiper Plug
USA Corporate Headquarters 1.800.816.7220
Canada Office & Distribution Center 1.800.604.1290 http://www.gryphonoilfield.com
The Echo DC cement wiper plug is designed to clean cement from the extended larger I.D. areas of the wellbore while being able expand and collapse without buckling to maintain its cleaning action in cavities of valve sleeves.
The series of specially designed wiper fins are durable enough to wipe the casing I.D. and cavities inside fracturing sleeves to ensure that the Echo DC sleeves can be shifted after the cementing operations are complete. Both latch down and bullnose versions are available depending on application.
Features and Benefits • Designed to activate keys and coat the liner with cement inhibiting
grease • Wiper spacing prevents plug from stalling in profile sleeves • Wiper fins ensure as much cement as possible is cleaned from all
recessed areas • Premium elastomers available on request
Specifications
Size Weight Mandrel O.D.
Overall Length
Pressure Rating (above wiper)
in lb/ft in ft psi mm kg/m mm m kPa
4-1/2 15.10 4.500 1.417 5,000 114.3 22.47 114.30 0.432 34,474
6
Echo Dissolvable Fracturing Plug
USA Corporate Headquarters 1.800.816.7220
Canada Office & Distribution Center 1.800.604.1290 http://www.gryphonoilfield.com
The Gryphon Echo series of dissolvable hydraulic fracturing plug technologies are specifically designed to provide a fully dissolvable multistage fracturing solution in the widest variation of applications. Developed with dissolvable magnesium alloys, dissolvable elastomers, and dissolvable high-strength metal-matrix material, the Echo dissolvable frac plugs are capable of withstanding pressures up to 10,000 psi (69 MPa) in temperatures up to 275° F (135° C). This range of performance is attainable due to Gryphon’s extensive research into advanced alloy technologies. The result is a creation of the ideal mix of both materials and product design focused on achieving the ideal downhole performance characteristics for all applications. The Echo series of dissolvable frac plugs are run on industry standard electric line setting tools. Wireline adapter kits are designed to optimize and increase flow area through the kit to maximize run in speed.
The field proven, traditional frac plug design ensures both exceptional performance and reliable dissolution in traditional brine conditions, extreme high temperature scenarios, or even fresh water environments.
Features and Benefits • Material variations available to provide the right tool for the environment • Proprietary dissolvable material available to suit a wide range of fracturing
fluids, including fresh water • Historically proven chassis design
- Compact dual slips - Dissolvable packing element - Dual sealing backup rings
• Innovative shear mechanism eliminates need for shear screws • Ball on seat running tool option • Enables longer laterals not possible with composite plugs and coiled tubing • Eliminates uncertainty, risk and inevitable costs associated with traditional
plug milling and removal • Greater speed-to-production
Specifications Casing Dissolvable Fracturing Plug
O.D. Weight I.D. Max. O.D.
Pressure Rating
Temperature Rating Length
Product in lb/ft in in psi ° F in
mm kg/m mm mm kPa ° C m 4-1/2 11.60 - 13.50 0.875 3.650 8,000 275
13.82 Echo CL Dissolvable Frac Plug 114.3 17.26 - 20.09 22.23 92.71 55,158 135
5-1/2 17.00 - 20.00
1.210 4.500 10,000
250 25.30 - 29.76 114.30 68,948 0.35 Echo FRESH+ Dissolvable Frac Plug 139.7 23.00 - 26.00 30.73 4.270 8,500 120
34.23 - 38.69 108.46 58,605
7
TRIDENT Series™ Products
8
SC Composite Fracturing Plug
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The Trident SC Composite Fracturing Plug, is a quick millable plug designed for
plug and perf operations. These plugs are run and set on wireline with the ball
on seat or the ball can be pumped down to the plug afterward. After fracturing,
the plugs are milled out to the full drift diameter of the wellbore, allowing for
maximum production.
This plug is designed with molded phenolic components, with a minimum
amount of metal used in the plug.
Features and Benefits
• Smaller OD and shorter length
• Molded composite material results in robust and consistent performance
• Pump down wiper is a part of the kit, one less part left downhole
• No shear screws left downhole (shear thread disconnect)
• Cast iron slips designed to aid easier mill outs through milled slots and holes
• Ability to pump down plug with ball in place
Specifications Casing Composite Fracturing Plug
Size Weight O.D. I.D. Ball Size Length Pressure
Rating Temperature
Rating
in lb/ft in in in in psi ° F mm kg/m mm mm mm cm kPa ° C
4-1/2 13.50 - 15.10 3.440
0.750 1.750
18.15
10,000
300 20.09 - 22.47 87.38 46.10 114.3 9.50 - 13.50 3.608 44.45 21.93 150
14.14 - 20.09 91.64 19.05 55.71
5-1/2
20.00 - 23.00 4.250
2.250
17.00 68,948 275 29.76 - 34.23 107.95 43.18 135
139.7 17.00 - 26.00 4.390 1.500 57.15 20.62 300 25.30 - 38.69 111.51 38.10 52.37 150
* For more information on additional sizes, please contact your local Gryphon representative
9
Hybrid Composite Fracturing Plug
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The Trident Hybrid Composite Fracturing Plug is an optimal design that
provides rugged, reliable performance in the well bore and ease of removal
during drill-out. The innovative slip design utilizes a composite upper slip for
more aggressive mill out procedures, while maintaining integrity during
hydraulic operations.
This plug was modeled after the Gryphon Trident SC Composite Frac Plug that
uses a single mandrel, intricate back up system and 10,000 psi (69 MPa) proven
element. The lower slip is ductile cast iron with hardened whickers. The break
up value on the lower slips is increased to prevent pre-sets while running in the
hole and encountering an obstruction. A water saver kit can be included to
reduce the amount of water bypass during pump down operations.
Features and Benefits
• Composite upper slips for ease of mill-out
• Compatible with standard phenolic or disintegrating balls
• Molded composite material results in robust and consistent performance
• Pump down wiper is a part of the kit, one less part left downhole
• No shear screws left downhole, (shear thread disconnect)
• “Ball on seat” option available during installation
• Single mandrel to reduce damage to plug if impacted
• Short length minimizes drill out time and debris
• 10,000 psi (69 MPa) differential pressure rating
Specifications Casing Fracturing Plug
Size Weight O.D. I.D. Ball Size
Length Pressure
Rating Temperature
Rating
in lb/ft in in in in psi ° F mm kg/m mm mm mm cm kPa ° C
5-1/2 20.00 - 23.00 4.250 0.770
2.250 16.75 10,000 300
25.30 - 38.69 107.95 19.56 150 139.7 17.00 - 26.00 4.390 1.500 57.15 42.55 68,948 275
25.30 - 38.69 111.51 38.10 135
* For information on additional sizes, please contact your local Gryphon representative
10
Total Composite Fracturing Plug
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The Gryphon Trident Total Composite Fracturing Plug is used to isolate
hydrocarbon formations in multi-stage, plug and perf fracturing operations.
Designed with molded phenolic components and low metallic content, the
Trident Total frac plug can be quickly and easily milled and circulated back to
surface with minimal effort. The plug can be run and set on wireline with a ball
on seat or the ball can be pumped down to the seat prior to beginning the frac
job. After fracturing, the plugs are milled out to the full drift diameter of the
wellbore, allowing for maximum production.
Features and Benefits
• Smaller OD and shorter length
• Molded composite material results in robust and consistent performance
• Pump down wiper is a part of the kit, one less part left downhole
• No shear screws left downhole (shear thread disconnect)
• Composite slips designed to aid easier mill outs through milled slots and holes
• Ability to pump down plug with ball in place
Specifications Casing Fracturing Plug
Size Weight O.D. I.D. Ball Size Length Pressure
Rating Temperature
Rating
in lb/ft in in in in psi ° F mm kg/m mm mm mm cm kPa ° C
5-1/2 20.00 - 23.00 4.250 0.750
2.250 16.75 8,000
250 139.7 29.76 - 34.23 107.95 19.05 121
6.0 24.50 4.850 0.758 57.15 42.55 55,158 175 152.4 36.46 123.19 19.25 79
* For more information on additional sizes, please contact your local Gryphon representative
11
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
X Composite Fracturing Plug
The Trident X Composite Fracturing Plug is a quick milling bridge plug designed for
plug and perforate operations. These plugs are run and set on wireline with the ball
on seat or the ball can be pumped down to the plug afterward. After fracturing, the
plugs are milled out to the full drift diameter of the wellbore, allowing for maximum
production.
This plug is designed with all millable components, with an absolute minimum
amount of metal used in the plug. A patent pending composite slip design with cast
iron wickers holds the plug securely in place when the plug is set. An innovative
collet system is utilized to increase the reliability of the shear release during setting.
This state of the art design ensures fast drilling and a secure, pressure tight seal at
an affordable price.
Features and Benefits
• 10,000 psi (69 MPa) differential pressure rating
• Near metal free plug, with only slip faces made from millable cast iron
• No shear screws left downhole
• Reliable setting due to collet-based releasing system
• Immediate flow back through large ID mandrel
• High quality composite materials
• Milled material forms small cuttings, similar to sawdust
• Ability to pump down plug with ball in place
• Small OD to fit through restrictions
• Set with standard 10 setting tool
• Shorter than industry standard design
Specifications Casing Composite Fracturing Plug
Size Weight O.D. I.D. Ball Size Length Pressure
Rating Temperature
Rating
in lb/ft in in in in psi ° F mm kg/m mm mm mm cm kPa ° C
4-1/2 13.50 - 15.10 3.500 1.000 1.250 14.27 10,000 225 114.3 20.09 -22.47 88.90 25.40 31.75 36.25 68,948 107
12
SUREstack™ Products
13
Liner Casing Packer
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The Liner Casing Packer is a hydraulic set packer designed to hang the liner string in
the casing, providing isolation from above and below. The Liner Casing Packer is
designed for a wide casing range, allowing it to be deployed in diverse applications
including heavier weight casing. A locking, bi-directional slip design eliminates any
concerns of premature setting or breaking slips during running operations. The latch
unit and liner top have a built-in clutch feature which allows for liner rotation up to
the maximum thread torque. This feature also incorporates a 1.5 inch (38.1 mm) free
point which provides simple rotation and removal of the drill / tie back string even in
high deviation applications. With the Gryphon liner and latch assembly, the latch is
the running tool making this ‘one trip system’ another option for saving completion
costs.
Additionally, the Liner Casing Packer has the option of an upper Polished Bore
Receptacle (PBR) which accepts either a Locator Seal Assembly or Anchor Latch Seal
Assembly. Various PBR lengths are available providing a customized application
solution.
Features and Benefits
• Adjustable setting pressures for different down hole applications
• 10,000 psi (69 MPa) differential pressure rating
• Ratchet maintains consistent pack off regardless of pressure differentials
• 1.5 inch (38.1 mm) free point assists latch removal
• Centralized above and below
• Rotationally friendly
• Locking bi-directional slip design
• Rated to 400° F (204° C) with standard trim
• Premium threads and elastomers available on request
Specifications
Size Weight Casing Range
Packer O.D.
Packer I.D.
Packer Seal Bore
Seal Assy. I.D.
Pressure Rating
in lb/ft lb/ft in in in in psi mm kg/m kg/m mm mm mm mm kPa
6-5/8 x 4-1/2 15.10 20.00 5.800 3.780
4.865
3.780
10,000
168.3 x 114.3 22.47 29.76 147.32 96.01 96.01
7 x 4-1/2
13.50
23.00 - 32.00 5.900
3.875
3.900 20.09 98.43 123.57 177.8 x 114.3 11.60 34.23 - 47.62 149.86 3.938 99.06 68,948
17.26 100.03
9-5/8 x 5-1/2 17.00 43.50 - 53.50 6.000 4.900 6.000 4.900 244.5 x 139.7 25.30 64.74 - 79.62 152.40 124.46 152.40 124.46
14
Liner Casing Packer Setting Tool
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The Liner Casing Packer Setting Tool is engineered to be ran in conjunction with the Liner
Casing Packer. It is designed as a secondary setting mechanism for the Liner Casing Packer.
The setting tool consists of three major components. The dual stage pump out plug, cup
mandrel assembly & a latch seal unit. The latch unit has a built-in clutch feature which
allows for liner rotation up to the maximum thread torque as well as a 1.5 inch (38.1 mm)
free point which provides simple rotation and removal of the drill / tie back string even in
high deviation applications. The dual stage pump out plug allows fluid to be pumped
through the ID until a ball is launched and lands in the pump out plug, which stops the flow
of fluid, isolating the setting tool and allowing pressure to set the Liner Casing Packer.
Once the packer is set, tubing pressure can be increased until the pump out plug shears
and once again flow is established.
Features and Benefits
• Chevron type v-seals
• Primary or secondary setting feature for Liner Casing Packer
• Adjustable shears for pack off forces on Liner Casing Packer
• Dual redundant cup system
• Available with a wide variety of seal configurations
• Clutch allows for rotation up to maximum thread torque
• 1.5 inch (38.1 mm) free point which allows for simple rotation and removal
• 10,000 psi (69 MPa) rated
• Premium threads and elastomers available on request
15
Latch Seal Unit
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The Latch Seal Unit provides a positive anchoring of the production tubing to the
liner casing packer preventing upward movement of the tubing due to pressure or
tension. The latch automatically latches by engaging threads on the packer and is
released by right hand rotation. A clutch feature built into the latch body allows liner
rotation up to maximum thread torque. This feature also provides a 1.5 inch (38.1
mm) free point which allows for simple rotation and removal of the drill/tie back
string even in high deviation applications. Designed to provide a dependable, leak-
proof seal between a seal bore packer and the production string, this seal assembly
features the field proven Chevron Type V-Seal design in an opposed seal
configuration using metal back up and spacer rings.
Features and Benefits
• Chevron type V-seals
• Available with a wide variety of seal configurations
• Clutch allows for rotation up to maximum thread torque
• 1.5 inch (38.1 mm) free point which allows for simple rotation and removal
• Adjustable activation pressure for varied down hole applications
• Available with a wide variety of seal configurations
• I.D. and O.D. designed to pipe diameter
• 10,000 psi (69 MPa) rated
• Premium threads and elastomers available on request
Specifications
Fits Packer Seal Bore
Body Max. O.D.
Seal Unit Min. I.D.
Pressure Rating
in in in psi mm mm mm kPa
4.865
5.750 3.720
10,000
146.05 94.49
123.57 5.900 3.900 149.86 99.06 68,948
6.000 7.000 4.900 153.00 177.80 124.46
16
Locator Seal Unit
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The Locator Seal Unit is used to locate and seal the end of a tieback casing string into
the receptacle installed on the top of the liner top packer. It can be used in
conjunction with a hold down body to ensure that a pressure tight seal is maintained
when the pressure in the casing is increased, such as during fracturing treatment
operations. Designed to provide a dependable, leak-proof seal between a packer
seal bore and the casing string, this seal assembly features the field proven Chevron
type v-seal design in an opposed seal configuration using metal back up and spacer
rings. For horizontal applications where string rotation is very limited, the Locator
Seal Unit can be anchored by adding the Gryphon hold down body above the locator
seal unit to provide an anchor.
Features and Benefits
• Chevron type V-seals
• Available with a wide variety of seal configurations
• O.D. designed to pipe diameter
• 10,000 psi (69 MPa) rated
• Premium threads and elastomers available on request
Specifications
Fits Packer Seal Bore
Seal Unit Max. O.D.
Seal Unit Min. I.D.
Pressure Rating
in in in psi mm mm mm kPa
4.865
5.750 3.720 13,000 146.05 94.49 89,632
123.57 5.900 3.900
10,000 149.86 99.06
6.000 7.000 4.900 68,948 153.00 177.80 124.46
17
Hold Down Body
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The Hold Down Body is a reliable pressure actuated hold down device which is
designed to be run above a Locator Seal Assembly. This design is ideal for horizontal
wells where rotation of the string is limited. When tubing pressure exceeds annulus
pressure, the hydraulic hold down slips are forced outward against the casing wall,
ensuring positive anchoring and eliminating any upward movement of the string.
When the annulus pressure exceeds the tubing pressure, the hydraulic hold down
slips automatically retract.
Features and Benefits
• Ideal for horizontal stimulation or testing operations
• Rugged slip design prevents upward movement
• Hydraulic area protected from debris
• Full drift I.D.
• Gauge rings ensure centralization
• Torque through capability
• Rated to 400° F (204° C) with standard trim
• Premium threads and elastomers available on request
Specifications
Liner Size
Liner Weight
Casing Size
Casing Weight
Gauge O.D.
Tool I.D.
Pressure Rating
in lb/ft in lb/ft in in psi mm kg/m mm kg/m mm mm kPa
4-1/2
15.10 6-5/8
24.00 5.750
3.720
10,000
35.72 146.05
22.47 168.3 20.00 5.850 94.49 114.3 29.76 148.59 68,948
11.60 7 20.00 - 29.00 6.031 3.880 17.26 177.8 29.76 - 43.16 153.19 98.55
18
Short Open Hole Packer
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The Short Open Hole Packer is a hydraulic set packer designed to provide isolation between open hole frac stages. The large bore I.D. allows future milling / retrieving and service tools to pass through without issue. The short design facilitates reliable deployment through aggressive build sections in the well bore and eliminates the need for handling pup joints, reducing completion costs. The Short Open Hole Packer comes standard with an integrated rotating, hardened, low friction centralizer to help ensure smooth installation of liner systems. Because of it’s proximity to the element, the centralizer provides improved element stand-off in the open hole section providing a more reliable seal. An anti-extrusion back up ring system provides improved element pack off, allowing for reliable sealing in open hole sections.
Features and Benefits
• Adjustable setting pressures for different down hole applications
• 10,000 psi (69 MPa) differential pressure rating
• Element anti-extrusion back-up system, with o-ring back-ups for improved pressure integrity
• Ratchet maintains consistent pack off regardless of pressure differentials
• Rotating centralizer integrated into packer design
• Centralizer placement allows even element pack off, with other systems the setting of the tools forces the packer elements to lift and centralize the entire liner string while setting
• Centralizer rotation designed to ensure residual torque is used to tighten connections
• Centralizer is hardened and coated to help ensure smooth packer installation
• Rated to 400° F (204° C) with standard trim
• Premium threads and elastomers available on request
See specification table on next page
19
Short Open Hole Packer
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
Specifications
Connection Size
Connection Weight
Packer I.D.
Open Hole Size
Centralizer O.D.
Packer O.D.
Pressure Rating
in in in in in in psi mm mm mm mm mm mm kPa
3-1/2 9.30 2.937 4.750 4.500 4.375
10,000
88.9 13.84 74.60 120.7 114.30 111.13
4-1/2
15.10 3.720
5.625 5.438
5.380 142.9 138.13
22.47 94.49 5.750 5.563 136.65 146.1 141.30
13.50 3.875
6.000 5.813
5.630 152.4 147.65
6.125 5.938 143.00 20.09 98.43 155.6 150.83
6.250 6.063 5.812 68,948 114.3 158.8 154.00 147.62
11.60 3.938
5.880 5.688
5.630
149.4 144.48
6.000 5.813 152.4 147.65 143.00
17.26 100.03 6.125 5.938 155.6 150.83
6.250 6.063 5.812 158.8 154.00 147.62
5-1/2
7.750 7.563
7.375
14,000
196.9 192.10 7.875 7.688 187.33 200.0 195.28 8.000 7.813
7.625
96,527 203.2 198.45
23.00 4.670 8.125 7.938 193.68 34.23 118.62 206.4 201.63
or or 8.250 8.063
7.875
15,000
20.00 4.778 209.6 204.80
139.7 29.76 121.36 8.375 8.188 200.03
or or 212.7 207.98
17.00 4.892 8.500 8.313
8.125 25.30 124.26 215.9 211.15 8.625 8.438 206.38 103,421 219.1 214.33 8.750 8.563
8.375 222.3 217.50
8.875 8.688 212.73 225.4 220.68
20
RC Millable Valve
USA Corporate Headquarters 1.800.816.7220
Canada Office & Distribution Center 1.800.604.1290 http://www.gryphonoilfield.com
The SUREstack™ RC Millable Valve is a ball activated fracturing sleeve designed for multiple frac stages in a well bore. High flow circumferential ports located on the housing of the sleeve permits continuous communication to the reservoir for high pressure fracturing operations and production. This system uses low specific gravity balls, which encourages flow back when the well is put on production. Specially designed anti-rotational features are incorporated into the sleeve to ensure reliable seat mill-out performance. Utilizing a designated shifting tool, the valve sleeve can be closed to shut-off water producing intervals or for interval production evaluation.
The SUREstack™ RC Millable Valve is available in 0.063, 0.094 and 0.125 inch (1.60, 2.39 and 3.18 mm) ball increments, allowing for increased interval density to optimize production and to permit higher achievable fracturing pump rates.
Features and Benefits • Compact design for ease of handling (no pup joints required) • Improved ball seat geometric features to enhance production capability, ball
on seat pressure rating, and ball off seat performance • Simple valve, with only 4 main components • Extremely short valve, allowing for tighter stages • Up to 42 stages when run with a SUREstart™ Valve • Re-closable, designed for open-hole applications • Utilizes easy to mill ball seat from Gryphon’s other millable valves • Compatible with all types of Gryphon’s fracturing balls including dissolvables • Rated to 400° F (204° C) with standard trim, elastomer upgrades available See specification table on next page
21
RC Millable Valve
USA Corporate Headquarters 1.800.816.7220
Canada Office & Distribution Center 1.800.604.1290 http://www.gryphonoilfield.com
Specifications
Size Weight Max. O.D.
Seat Increment
Post Millout I.D.
Max. Ball Size
Max. Seat I.D.
Min. Ball Size
Min. Seat I.D.
in lb/ft in in in in in in in mm kg/m mm mm mm mm mm mm mm
4-1/2
15.10 5.400 0.125
3.701 3.125 3.350 3.125 3.015
3.18 79.38 85.09 79.38 76.58 22.47 137.16 0.063 94.01 3.375 3.328 0.875 0.813
1.60 85.73 84.53 22.23 20.65
11.60 - 13.50 5.750
0.125
3.875
3.625 3.515 3.125 3.015 114.3 3.18 92.08 89.28 79.38 76.58
0.094 3.750 3.671 3.469 3.390 17.26 - 20.09 146.05 2.39 98.43 95.25 93.24 88.11 86.11
0.063 3.375 3.328 0.875 0.813 1.60 85.73 84.53 22.23 20.65
5-1/2
23.00
7.000
0.125
4.500
4.500 4.390 3.875 3.765 3.18 114.30 111.51 98.43 95.63
0.094 3.750 3.671 3.469 3.390 34.23 2.39 114.30 95.25 93.24 88.11 86.11
0.063 3.375 3.328 1.500 1.453 1.60 85.73 84.53 38.10 36.91
20.00
0.125
4.625
4.625 4.515 3.875 3.765 3.18 117.48 114.68 98.43 95.63
0.094 3.750 3.671 3.469 3.390 139.7 29.76 177.80 2.39 117.48 95.25 93.24 88.11 86.11
0.063 3.375 3.328 1.500 1.453 1.60 85.73 84.53 38.10 36.91
17.00
0.125
4.750
4.750 4.640 3.875 3.765 3.18 120.65 117.86 98.43 95.63
0.094 3.750 3.671 3.469 3.390 25.30 2.39 120.65 95.25 93.24 88.11 86.11
0.063 3.375 3.328 1.500 1.453 1.60 85.73 84.53 38.10 36.91
22
NC Millable Valve
USA Corporate Headquarters 1.800.816.7220
Canada Office & Distribution Center 1.800.604.1290 http://www.gryphonoilfield.com
The SUREstack™ NC system is a revolutionary liner system for cemented or open hole applications. The permanently locked open, ball activated SUREstack™ NC valve is designed for installation in cased holes and is simple, yet economical to deploy, utilizing Gryphon’s ball and seat technology. Balls are available in either a dissolvable or conventional millable style. The standard system is equipped with HNBR elastomers and LTC or BTC threads or can be ordered with premium elastomers and threads.
This system is intended to reduce the cost of a liner system by simplifying the valve as much as possible and by eliminating the requirement for open hole packers in cemented applications. Minimizing the equipment installed in the wellbore reduces not only the equipment cost, but also the time and risk associated with installation of any equipment.
Features and Benefits • Compact design for ease of handling (no pup joints required) • Improved ball seat geometric features to enhance production capability, ball
on seat pressure rating, and ball off seat performance • Simple valve, with only 4 main components • Extremely short valve, with no requirement for open hole packers in
cemented applications, allowing for tighter stages • Up to 47 stages when run with a SUREstart™ Valve • Non-closable design • Utilizes easy to mill ball seat from Gryphon’s other millable valves • Compatible with all types of Gryphon’s fracturing balls including dissolvables • Rated to 400° F (204° C) with standard trim, elastomer upgrades available
Specifications
Size Weight Max. O.D.
Post Millout I.D.
Max. Ball Size
Max. Seat I.D.
Min. Ball Size
Min. Seat I.D.
Pressure Rating
in lb/ft in in in in in in psi mm kg/m mm mm mm mm mm mm kPa
4-1/2 11.60 - 13.50 5.800 3.875 3.750 3.671 0.875 0.828 10,000 114.3 17.26 - 20.09 147.32 98.43 95.25 93.24
5-1/2 17.00 - 20.00 7.000 4.767 4.750 4.640 22.23 21.03 68,948 139.7 25.30 - 29.76 177.80 121.08 120.65 117.86
23
RT Retrievable Valve
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The SUREstack™ RT Retrievable Valve is a ball-activated fracturing sleeve, designed
to allow for multiple frac stages in a horizontal well bore. Once the well has been
fractured, it can either be shut in or flowed back depending on customer preference.
Using a service rig or coiled tubing unit and a Gryphon retrieving tool, the seats are
retrieved with a simple tag and release method.
With its patented design, up to 36 seats can be retrieved in a single trip. Utilizing a
designated shifting tool, the sleeve(s) can then be closed to shut-off water producing
intervals or for interval production evaluation. This system utilizes low specific
gravity balls which encourage flow back when the well is put on production.
Features and Benefits
• No milling or drilling
• Full drift inner diameter after seat retrieval
• Decrease post frac, pre-production time by up to 40%
• Flow port area designed to prevent screen out and reduce solids inflow
• Compact design for ease of handling (no pup joints required)
• Available in 3-1/2 and 4-1/2 inch (88.9 and 114.3 mm) sizes
• Available in 0.050 and 0.100 inch (1.27 and 2.54 mm) ball seat increments allowing for increased interval density to optimize production and to permit greater achievable fracturing pump rates
• Locking design ensures sleeve cannot prematurely shift closed
• Up to 37 stages in 4-1/2 inch (114.3 mm) size
• Closable sleeve feature for production optimization
• Adjustable activation pressure
• Circulation capability during retrieval improves wellbore clean-out
• 10,000 psi (69 MPa) rated
• Rated to 400° F (204° C) with standard trim
• Premium threads and elastomers available on request
Specifications
Size Weight Max. O.D.
Min. I.D. Post Retrieval
Seat Increment
Max. Ball Size
Max. Seat I.D.
Min. Ball Size
Min. Seat I.D. Max.
Stages in lb/ft in in in in in in in mm kg/m mm mm mm mm mm mm mm
3-1/2
9.30 4.625 2.867 1.750 1.715
0.850 0.815
20 13.84 117.48 72.82 44.45 43.56
88.9 12.95 4.500 2.625 0.050 1.400 1.365 13
19.27 114.30 66.68 1.27 35.56 34.67
4-1/2
11.60
5.750
3.875 or
2.600 2.565 37
17.26 98.43 0.100 21.59 20.70
13.50 3.795 2.54 66.04 65.15 114.3 20.09 146.05 96.39
15.10 3.700 2.500 2.465 35
22.47 93.98 63.50 62.61
24
Open Hole Anchor
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The Open Hole Anchor is a hydraulic set anchor primarily designed to anchor the
bottom of a liner assembly into the open hole to prevent any unwanted and
potentially damaging movement in the liner string during fracturing operations.
Bi-directional slips are locked in place during running, eliminating the possibility
of premature setting.
Features and Benefits
• Adjustable setting pressures for different down hole applications
• 10,000 psi (69 MPa) differential pressure rating
• Ratchet maintains consistent pack off regardless of pressure differentials
• Locking slip design provides reliable deployment
• Rated to 400° F (204° C) with standard trim
• Premium threads and elastomers available on request
Specifications
Size Open Hole
Size Anchor
O.D. Anchor
I.D. Pressure
Rating
in in in in psi mm mm mm mm kPa
4-1/2
5.625 5.380 3.720
10,000
142.9 136.65 94.49
6.000 5.750
4.000 114.3 152.4 146.05 68,948
6.125 - 6.250 5.900 101.60 155.6 - 158.8 149.86
5-1/2
7.750 - 8.125 7.375
4.778 11,000 196.9 - 206.4 187.33
139.7 8.250 - 8.875 7.875 121.36 75,842 209.6 - 225.4 200.03
25
Pressure Actuated Valve (PAV)
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The Pressure Actuated Valve is a hydraulically activated fracturing sleeve,
designed to initiate fracturing operations. Internal tubing pressure is applied
to a predetermined pressure, activating a piston until the shear screws shear
to open the valve. After opening, a locking system ensures that the valve
cannot re-close.
Features and Benefits
• Compact design for ease of handling (no pup joints required)
• Simplicity of design enhances reliability
• Ports have larger flow area than the liner to assist in preventing screen
outs
• Adjustable activation pressures for different down hole applications
• Spring assisted valve and locking system ensures valve always opens and stays locked in the open position
• Valve system protected from manual manipulation both internally and
externally
• Full bore I.D.
• Premium threads and elastomers available on request
Specifications Guide
Size Weight Max. O.D. Min. I.D. Pressure
Rating
in lb/ft in in psi mm kg/m mm mm kPa
3-1/2 9.30 4.311 3.000
10,000
88.9 13.84 109.50 76.20
4-1/2
15.10 5.500 3.720 22.47 139.70 94.49
13.50 5.625
3.875 114.3 20.09 98.43
11.60 142.88 4.000 68,948
17.26 101.60
5-1/2
17.00
7.750
4.892 25.30 124.26
139.7 20.00 196.85 4.813 29.76 122.25
26
Flow Lock Collar
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The Flow Lock Collar is a ball activated tubing isolation valve, designed to
allow the liner system to be set after the wellbore has been circulated with the
desired fluid. A ball is circulated down the tubing until it lands on the flow lock
seat. Pressure is applied from above until the predetermined activation
pressure is achieved, shifting a piston which locks into the closed position and
permanently shuts off the liner until the frac is initiated. Pressure can now be
increased to set the remaining liner components.
Features and Benefits
• Once shifted, piston locks closed and cannot be re-opened
• Available with a 0.750 or 1.125 inch (19.05 or 28.58 mm) I.D. to allow for higher density fluid type circulation
• Adjustable activation pressure for varied down hole applications
• Compact design for ease of handling (no pup joints required)
• Simplicity of design enhances reliability
• 10,000 psi (69 MPa) rated
• Premium threads and elastomers available on request
Specifications
Size Max. O.D.
Ball Size Flow Area
Pressure Rating
in in in in2 psi mm mm mm cm2 kPa
4-1/2 4.500 0.800 0.44
10,000
20.32 2.85 114.30 114.30 1.250 0.99
31.75 6.41
5-1/2 6.050
1.150
0.79
68,948 29.21
139.70 153.67 1.150 5.07 29.21
27
2 Stage Flow Lock Collar
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The 2 Stage Flow Lock Collar in the SUREstack™ cementable system is
designed to allow for completions utilizing a cemented liner casing packer.
Once the liner is in position, a ball is pumped from surface to close off the first
stage of the flow lock collar, allowing pressure to be built up to set the liner
casing packer slips. Increased pressure will then shear out the ball seat and
allow the cement to be pumped past the flow lock collar and around the liner
system. At the tail of the cement, the SUREstack™ Cem Wiper Plug is
deployed to clean any cement out of the string and permanently close off the
toe of the string to hold the cement in place and allow it to cure.
Features and Benefits
• 10,000 psi (69 MPa) working pressure
• Once shifted, piston locks closed and cannot be re-opened
• Adjustable activation pressure for varied down hole applications
• High volume flow ports for cement displacement
• Compact design for ease of handling (no pup joints required)
• O.D. designed to pipe diameter
• Simplicity of design enhances reliability
• 10,000 psi (69 MPa) rated
• Premium threads and elastomers available on request
Specifications
Size Max. O.D.
Ball Size Flow Area
Pressure Rating
in in in in2 psi mm mm mm cm2 kPa
4-1/2 5.000 0.800 0.33 10,000 114.3 127.00 20.32 2.13 68,948
28
Cem Wiper Plug
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The Cem Wiper Plug is designed to clean cement from the extended
larger I.D. areas of the wellbore while being able expand and collapse
without buckling to maintain its cleaning action in cavities of valve
sleeves.
The series of specially designed wiper fins are durable enough to wipe the
casing I.D. and cavities inside fracturing sleeves to ensure that the valve
sleeves can be shifted after the cementing operations are complete. Once
wiping is completed, the wiper plug seals in the landing collar, preventing
flow back.
Features and Benefits
• Able to clean both large and small diameters
• Wiper spacing prevents plug from stalling in profile sleeves
• Wiper fins ensure as much cement as possible is cleaned from all recessed areas
• Premium elastomers available on request
Specifications
Size Max. O.D.
Minimum I.D. (wiper can pass thru)
Pressure Rating (above wiper)
in in in psi mm mm mm kPa
4-1/2 4.500 2.250 5,000 114.3 114.30 57.15 34,474
29
SUREstart™ Products
30
SUREstart™ XP Valve
USA Corporate Headquarters 1.800.816.7220
Canada Office & Distribution Center 1.800.604.1290 http://www.gryphonoilfield.com
The SUREstart™ XP Valve is a pressure actuated sliding sleeve which is designed to be run on the bottom of a cemented completion string, providing a method of pressure testing the casing, then initiating the first fracturing stage. When surface pressure is applied to open the valve, circulation is established with the formation to allow for subsequent treatment operations. Once activated, the spring assisted piston and lock open feature ensures that the sleeve is always fully open.
Features and Benefits • Compact design for ease of handling (no pup joints required) • Internal piston is protected and hydraulically balanced to prevent premature
activation • Spring assisted piston and magnetic lock-open feature ensures valve fully
opens and remains open • Equipped with interchangeable burst disks, available in 500 psi (3.5 MPa)
increments • Flow port area designed to prevent screen out • Full drift I.D. to allow standard wiper plugs to pass through the valve
unimpeded • Torque through capability • Rated to 400° F (204° C) with standard trim, elastomer upgrades available • Available with total pressure rating up to 20,000 psi (138 MPa)
Specifications
Size Casing Range O.D. I.D. Connection Size
Max. Total Pressure
in lb/ft in in in psi mm kg/m mm mm mm kPa
4-1/2 13.50 - 15.10
5.900 3.815
4.50 17,000
20.09 - 22.47 96.90 117,211 114.3 11.60 - 13.50 149.86 3.895 114.3 15,000
17.26 - 20.09 98.93 103,421 5 18.00 5.780 3.620 4.50 & 5.0
20,000 127.0 26.79 146.81 91.95 114.3 & 127.0
5-1/2 17.00 - 23.00 6.125 3.895
5.50 155.58 98.93 137,895 139.7 25.30 - 34.23 7.250 4.787 139.7
184.15 121.59
31
Millable Landing Sub
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The SUREseat Millable Landing Sub is designed to be used for testing casing
integrity either before or after a fracturing treatment. It can be installed above a
SUREstart™ valve to ensure wellbore integrity after the first zone is pumped, or it
can be positioned above Gryphons’ SUREstack™ system and used to verify the
integrity of the string to surface after the fracturing jobs have been completed
(Directive 083 – Subsurface Integrity).
Features and Benefits
• Utilizes Gryphons’ ball seat technology for maximum ball on seat ratings
• Available with fibreglass or dissolvable balls
• Easily millable, durable cast iron ball seats
• A wide range of ball seats available
• Customizable ball on seat pressure ratings
• Compact, torque through housing
Specifications
Size Weight Max. O.D.
Post Millout I.D.
Max. Ball Size
Max. Seat I.D.
Min. Ball Size
Min. Seat I.D.
in lb/ft in in in in in in mm kg/m mm mm mm mm mm mm
4-1/2 11.60 - 13.50 5.750 3.875 3.750 3.640
3.000 2.890
114.3 17.26 - 20.09 146.05 98.43 95.25 92.46
5-1/2
23.00
7.000
4.500 4.500 4.390 34.23 114.30 114.30 111.51
20.00 4.625 4.625 4.515 76.20 73.41 139.7 29.76 177.80 117.48 117.48 114.68
17.00 4.750 4.750 4.640 25.30 120.65 120.65 117.86
32
SUREjet Products
33
SUREjet Fracturing System
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The SUREjet Abrasive Jet Fracturing System brings proven reliability and efficiency
to annular fracturing operations. As an economical alternative to coiled tubing
fracturing sleeves, the system requires no auxiliary liner equipment and works
effectively in sand-laden environments providing on-the-fly pinpoint fracturing. It is
designed to fracture multiple stages reliably in sand-laden environments in a single
trip. This system has demonstrated proven reliability with zero tool non-productive
time, successfully completing over 1,000 fracturing stages, averaging 20 stages per
well, in various formations.
Features and Benefits
• Advanced design capable of cutting and fracturing more than 40 fracturing stages in a single trip
• Abrasive perforator has 5 to 8 minute cut interval capability using standard fracturing sand
• Mechanical collar locator has field adjustable over-pull which increases depth correlation reliability in longer laterals and minimizes tool failure
• Unloader valve designed to function effectively in heavy sand-laden environments
• Works in both 4-1/2 inch (114.3 mm) and 5-1/2 inch (139.7 mm) wellbores
• Unique component coatings provide element longevity and component erosion resistance
• Rated to 400° F (204° C) with standard trim, elastomer upgrades available
Specifications
Casing Size
Casing Weight
Casing I.D. Gauge O.D. Pressure
Rating Connection
Size
in lb/ft mm mm psi in mm kg/m in in kPa mm
4-1/2
15.10 3.823 3.690
10,000
22.47 97.10 93.73
13.50 3.920 3.785 114.3 20.09 99.57 96.14 2-3/8
11.60 4.000 3.785 60.3 17.26 101.60 96.14 EUE Box
5-1/2
23.00 4.670 4.535 68,948 x 34.23 118.62 115.19 NUE Pin 20.00 4.778 4.643 Down
139.7 29.76 121.36 117.93
17.00 4.892 4.757 25.30 124.26 120.83
34
Abrasive Perforator
USA Corporate Headquarters 1.800.816.7220
Canada Office & Distribution Center 1.800.604.1290 http://www.gryphonoilfield.com
The SUREjet Abrasive Perforator is a compact, powerful tool which is used to bore holes in casings and gain access to the formation without the need for any equipment to be installed in the casing string. Used in new monobore applications as part of the SUREjet system, to increase flexibility with the SUREshift system or for re-stimulation of old wells.
Features and Benefits
• 3 carbide nozzles spaced at 120° • Uses 20/40 mesh sand or 100 mesh sand to cut • Multiple nozzle sizes for different applications • Carbide sleeves for added wear resistance • Compact tool for minimal BHA length • Compatible with the Gryphon SUREshift system
Specifications Tool O.D.
Tool I.D.
Nozzle Size
Max. Nozzle Flow Area Connection
in in in in2 in mm mm mm cm2 mm
2.875 1.500
0.150 0.05
2-3/8 NUE 3.81 0.34
0.188 0.08 73.03 38.10 4.78 0.54 60.3 NUE
0.250 0.15 6.35 0.95
35
SUREjet Packer
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The SUREjet Annular Frac Packer is a multi-set, single grip, compression set packer
designed to provide isolation in cased hole fracturing operations. Although this
packer is designed to be deployed on coil tubing, it can also be run on jointed pipe in
either vertical or horizontal applications. A specially developed sand friendly
continuous jay and integral bypass system allows reliable run, set and retrieving
during fracturing operations. This packer can also be utilized for pressure testing
operations in liner applications. The modular design allows this packer to be easily
converted to a straddle packer assembly.
Features and Benefits
• No rotation required for setting
• Continuous jay system designed for reliable functioning in sand-laden conditions
• Integral bypass allows equalization at the packer
• Low pack-off force required to fully set element
• Available for 6,000 or 10,000 psi (41 or 69 MPa) differential rating
• Carbide slips ensure a reliable non-slip set in sand-laden conditions
• Rated to 400° F (204° C) with standard trim, elastomer upgrades available
Specifications
Casing Size
Casing Weight
Casing I.D. Gauge
O.D. Pressure
Rating Connection
Size
in lb/ft in in psi in mm kg/m mm mm kPa mm
4-1/2 9.50 - 13.50 3.920 - 4.090 3.771
6,000
2-3/8
114.3 14.10 - 20.09 99.57 - 103.89 95.78
5-1/2
20.00 - 23.00 4.670 - 4.778 4.500 29.76 - 34.23 118-61 - 121.36 114.30 41,369
139.7 15.50 - 17.00 4.892 - 4.950 4.718 23.07 - 25.30 124.26 - 125.73 119.84
4-1/2
15.10 3.823 3.690
10,000
22.47 97.10 93.73 60.3
13.50 3.920 3.785 EUE Pin Up 114.3 20.09 99.57 96.14 x
11.60 4.000 3.785 NUE Pin 17.26 101.60 96.14 Down
5-1/2
23.00 4.670 4.535 68,948 34.23 118.62 115.19
20.00 4.778 4.643 139.7 29.76 121.36 117.93
17.00 4.892 4.757 25.30 124.26 120.83
36
Casing Collar Locator (CCL)
USA Corporate Headquarters 1.800.816.7220
Canada Office & Distribution Center 1.800.604.1290 http://www.gryphonoilfield.com
The SUREjet Casing Collar Locator is utilized to indicate tool depth on wells with casing collar gaps, such as casing with LTC threads. The locating dogs snap into the collar gaps of each casing connection, providing an overpull indication as the tool travels up the wellbore. This overpull indication can be compared with the pipe tally to provide accurate depth confirmation when it is required, such as when perforating with the SUREjet System.
Features and Benefits
• Adjustable overpull force • Designed to function in sand and debris laden environments • Heat treated indicator blocks • Inexpensive to redress
Specifications Casing
Size Casing Range
Max. O.D.
Tool I.D. Connection
in lb/ft in in in mm kg/m mm mm mm
4-1/2 9.5 - 13.5 4.300
1.500 2-3/8 NUE
114.3 14.1 - 20.1 109.2
5-1/2
23.00 4.970 34.23 126.2 20.00 5.078 38.10 60.3 NUE
139.7 29.76 129.0 15.50 - 17.00 5.192
23.1 - 25.3 131.9
37
Perforating Magnet
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The SUREjet Perforating Magnet is designed to clear any wellbore debris and keep
it away from the packing elements or cups in the SUREjet or SUREstraddle systems.
The powerful magnets gather debris and keep them firmly in place until the tool
string is removed from the wellbore.
Features and Benefits
• Powerful rare earth magnets
• Stainless steel protection sleeve
• Flow though design
• Isolators to prevent magnets from being broken due to shock loads
• Available with NUE or PAC connection
• Optional mule shoe or through connections
Specifications
Tubing Size
Tubing Weight
Max. O.D.
Pressure Rating
Upper Connection
in lb/ft in psi in mm kg/m mm kPa mm
2-3/8 4.70 3.771 10,000 2-3/8 NUE / PAC 60.3 6.99 95.78 68,948 60.3 NUE / PAC
38
SUREstraddle Products
39
SUREstraddle System
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The SUREstraddle system is Gryphon Oilfield’s next generation of straddle tools.
Two versions are available in 6,000 and 10,000 psi (41 and 69 MPa) rated tools. Both
tools take advantage of the reliable SUREjet packer as the bottom sealing element
and a high flow sub with Gryphon’s unique coating as the communication port
ensuring reliable fracturing. For the 6,000 psi (41 MPa) version is a simple, cost
effective tool with a durable cup mandrel run as the top sealing element. For the
10,000 psi (69 MPa) rated tool, the top section includes a locking unloader valve, cup
mandrel and slip package, all in one assembly. The top pressure activated slips
ensure that when the tool is set, and pressure is applied to the tubing, there is no
chance of the tool moving or the unloaders opening. The high pressure, multi-
durometer cups are designed for maximum durability.
Features and Benefits
• Spacing is achieved with 2-3/8 inch (60.3 mm) blast joint with no special components required
• Unique locking unloader keeps the unloader closed when treating or pressure testing
• 10,000 psi (69 MPa) multi-durometer cups for maximum stage counts
• Tool is locked in place by two sets of slips when pumping to ensure that the interval of interest is isolated for the duration of the treatment
• Emergency hydraulic slip release
• Unique component coatings provide element longevity and component erosion resistance
• Unloader valve designed to function effectively in heavy sand-laden environments
• Rated to 400° F (204° C) with standard trim, elastomer upgrades available
Specifications
Casing Size
Casing Weight
Casing I.D.
Gauge O.D.
Pressure Rating
Connection Size
in lb/ft mm mm psi in mm kg/m in in kPa mm
4-1/2
15.10 3.823 3.690
10,000
22.47 97.10 93.73 13.50 3.920 3.785
114.3 20.09 99.57 96.14 2-3/8
11.60 4.000 3.785 60.3 17.26 101.60 96.14 68,948 EUE
5-1/2
23.00 4.670 4.535 Box x Pin 34.23 118.62 115.19
139.7 20.00 4.778 4.643 29.76 121.36 117.93
40
SUREshift Products
41
SUREshift RC Valve
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The SUREshift RC fracturing valve and shifting tool is engineered for coiled tubing
fracturing operations. Its compact design and simple operating mechanism provides
reliable tool operation requiring only one shifting tool to open and close the sleeve.
Additionally, the SUREshift RC valve can be utilized in multiple configurations based
on isolation requirements and is suitable for re-fracturing operations.
The valves’ shifting sleeve is designed and proven to function reliably when exposed
to hardened cement sheath. With its shift up to open design, the sleeve is tolerant to
cement wiper plugs, ensuring the sleeve cannot inadvertently shift during
cementing operations.
Features and Benefits
• 10,000 psi (69 MPa) working pressure
• 6,000 – 8,000 lbs (2,668 – 3,558 daN) to shift sleeve open and closed
• Integral jetting nozzles for clearing potential debris from valves
• Unlimited stages
• Selective sleeve activation
• Shift up to open, prevents valve sleeve from opening when running wiper plug and ensures valve actuation in extended reach applications
• Shifting keys retract when pumping down the tubing and are designed to auto locate valves to limit operator error
• Specialized design prevents cement from adhering to the tool which could prevent the valve from opening
• Screen out friendly
• Re-closable and permanently locked open versions are available
• Rated to 400° F (204° C) with standard trim, elastomer upgrades available
Specifications
Casing Size
Casing Weight
Body O.D.
Body I.D.
Pressure Rating
in lb/ft in in psi mm kg/m mm mm kPa
4-1/2
15.10
5.750
3.830
10,000
22.47 97.28
13.50 3.920 114.3 20.09 146.05 99.57
11.60 4.000 17.26 101.60
5-1/2
23.00
7.000
4.670 68,948 34.23 118.62
20.00 4.778 139.7 29.76 177.80 121.36
17.00 4.892 25.30 124.26
42
SUREshift NC Valve
USA Corporate Headquarters 1.800.816.7220
Canada Office & Distribution Center 1.800.604.1290 http://www.gryphonoilfield.com
The SUREshift NC fracturing valve and shifting tool are engineered for coiled tubing fracturing operations. Its compact design and simple operating mechanism provides reliable tool operation, requiring only one shifting tool to open the sleeve. Additionally, the SUREshift NC valve can be utilized in multiple configurations based on isolation requirements and is suitable for re-fracturing operations.
The valves’ shifting sleeve is designed and proven to function reliably when exposed to hardened cement sheath. With its shift up to open design, the sleeve is tolerant to cement wiper plugs, ensuring the sleeve cannot inadvertently shift during cementing operations.
Features and Benefits • 10,000 psi (69 MPa) working pressure • 2,000 – 16,000 lbs (890 – 7,117 daN) to shift sleeve open • Valves are permanently locked open once activated • Can be run with the re-closable SUREshift RC and uses the same shifting tool
for maximum versatility • Unlimited stages • Selective sleeve activation • Shift up to open, prevents valve sleeve from opening when running wiper plug
and ensures valve actuation in extended reach applications • Specialized design prevents cement from adhering to the tool which could
prevent the valve from opening • Rated to 400° F (204° C) with standard trim, elastomer upgrades available
Specifications Casing
Size Casing Weight
Body O.D.
Body I.D.
Pressure Rating
in lb/ft in in psi mm kg/m mm mm kPa
4-1/2
15.10
5.750
3.830
10,000
22.47 97.28 13.50 3.920
114.3 20.09 146.05 99.57 11.60 4.000 17.26 101.60
5-1/2
23.00
7.000
4.670 68,948 34.23 118.62 20.00 4.778
139.7 29.76 177.80 121.36 17.00 4.892 25.30 124.26
43
SUREshift Shifting Tool
USA Corporate Headquarters 1.800.816.7220
Canada Office & Distribution Center 1.800.604.1290 http://www.gryphonoilfield.com
The SUREshift Shifting Tool is engineered to be installed on coiled tubing and used during fracturing operations to selectively open or close Gryphons’ SUREshift NC or RC valves. Its compact design and simple operating mechanism provides reliable tool operation for shifting the SUREshift valves.
The shifting tool utilizes fluid flow down the tubing to retract the keys and allow the tool to move freely in the wellbore. Rates as low as 1.6 bbls/min (250 L/min) will retract the keys.
Features and Benefits • Can be run with the SUREjet system • Hardened keys for maximum key life • Automatic key extension of keys when pumping is stopped • Integral jetting nozzles for clearing potential debris from valves • Carbide choke to allow abrasive cut sand to be pumped through the tool • Shifting keys retract when pumping down the tubing and are designed to auto
locate valves to limit operator error • Rated to 400° F (204° C) with standard trim, elastomer upgrades available
Specifications Casing SUREshift Shifting Tool
Size Weight Body O.D.
Upper Connection
in lb/ft in in mm kg/m mm mm
4-1/2 15.10 3.650
2-3/8 EUE Box 22.47 92.71
114.3 9.50-13.50 3.750 14.14-20.09 95.25 60.3 EUE Box
5-1/2 17.00-23.00 4.420 139.7 25.30-34.23 112.27
44
Compression Unloader Valve
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The Compression Unloader Valve is a compact and versatile unloader valve for
fracturing with the SUREshift System. This valve can be utilized for both fracturing
down tubing or fracturing down the annulus. The compression unloader is equipped
with a specially designed locking system which allows the valve to be locked in the
closed position by pressurizing the tubing.
When utilized for fracturing down the annulus, the compression unloader is
installed below the SUREshift shifting tool and is used to allow flow out of the tubing
during the fracturing procedure. This keeps the tubing and abrasive jetting ports
clear in case of a sand off and allows for high rates of circulation if a sand off occurs.
When used fracturing down the tubing, the unloader is installed above the
SUREshift shifting tool and is used as the flow port. The heat-treated components of
the Compression Unloader Valve are designed for long life in highly abrasive
environments. If there is a need to abrasive jet cut, the unloader is closed, locked and
then pumping down the tubing will allow the abrasive cutter to be utilized.
Features and Benefits
• Compact design
• Hardened components and large ports allow for high erosion tolerance
• Simple, effective locking mechanism
• Port area larger than tubing flow area
Specifications
Max. O.D.
Min. I.D. Port
Flow Area Threads
Pressure Rating
in in in2 in psi mm mm cm2 mm kPa
3.650 1.600 6.92 2-3/8 EUE 10,000 92.71 40.64 44.62 60.3 EUE 68,948
45
Thru Tubing Products
46
Thru Tubing WR Plug
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The SUREplug Thru Tubing WR Plug is a retrievable bridge plug which can be
conveyed and set on wireline, slickline or hydraulically set on coil tubing using a
hydraulic setting tool. It is commonly used for well or zone isolation while fracturing,
acidizing, cementing, testing or well head repair operations. The WR is generally set
using wireline, allowing the plug to be logged on depth and accurately placed in the
well. Conveying the plug into the well by jointed or coil tubing allows the operator to
place the plug in a deviated well where wireline or slickline is not an option.
Features and Benefits
• Simple installation and retrieval
• Built-in equalizing system
• Straight pull release
• Can be run into pressurized well utilizing a lubricator
• Will not release until equalizing valve has been shifted open
• One piece double acting slips holds plug securely against pressure from above or below
• Multiple retrieval options
• Rated to 400° F (204° C) with standard trim, elastomer upgrades available
Specifications
Tubing Size Tubing Weight Gauge O.D. Differential
Pressure Rating
in lb/ft in psi mm kg/m mm kPa
2-3/8 4.70 1.800
6,000
60.3 7.0 45.72
2-7/8 6.50 2.250 73.0 9.7 57.15
3-1/2 9.30 2.700 41,369 68.58
88.9 13.8 2.800 71.12
47
Gryphon CasingSolutions Products
48
Blue Cap Shoe Track System
USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290
http://www.gryphonoilfield.com [email protected]
The Gryphon Blue Cap Shoe Track System is a reliable, cost effective solution for
achieving a maximum casing integrity test and initiating intervention-less
communication with the reservoir in a cemented production string application,
without the use of a toe valve or TCP. The system is a unique design that pairs the
advantages of a wet shoe application with a shoe track system, compliant with
integrity testing and hydraulic fracturing regulatory requirements. Components
consist of top and bottom cement wiper plugs with integrated ball seats, latch-in
profile landing collar and compatible float equipment. The shoe track can be
shortened to reclaim lateral length by connecting the float components directly to
each other, allowing for stimulation of more lateral acreage. Cementing operations
are conducted as usual, launching top and bottom latch and seal wiper plugs as per
procedure, while carefully monitoring fluid displacement. Once complete, a
dissolvable ball is pumped to a seat integrated into the top wiper plug, allowing for
the desired casing test to be obtained. After a short time, the ball dissolves
completely and access to the well is regained allowing for first stage pumping
operations to begin.
The Blue Cap system can be tailored to meet specific well applications and includes
optional 5,000 or 10,000 psi (34 or 69 MPa) back pressure rated float equipment.
As an added safeguard, each wiper plug is designed to be both a top or bottom plug,
removing the risk of launching the incorrect plug.
Features and Benefits
• Reduces shoe track length increasing total production zone
• Cost effective, alternative to TCP and toe initiation valves
• Ability to achieve a 15,000 psi (103 MPa) casing integrity test
• Eliminates issue of plugging off caused by poor wiping efficiency
• Fully customizable to meet a wide variety of applications
• Available for a wide variety of casing sizes and weights
49
HBP Float Equipment
USA Corporate Headquarters 1.800.816.7220
Canada Office & Distribution Center 1.800.604.1290 http://www.gryphonoilfield.com
MINOTAUR HBP Float Collar
MINOTAUR HBP Float Shoe
The Gryphon MINOTAUR HBP line of float equipment is engineered to provide optimal shoe track integrity while preventing flowback of cement slurry in high back pressure “HBP” environments of up to 10,000 psi (69 MPa). Gryphons’ MINOTAUR HBP float equipment incorporates a unique poppet valve fabricated from high strength aluminum with full cover HNBR rubber coating. A proprietary mechanical bonding method ensures an effective non-movement seated seal, to survive high pressure and high temperature closures. The balanced flow poppet valve design allows for maximum circulation rates with less wear, insuring consistent reliability. The MINOTAUR HBP valve is available in various single or double valve float shoe and collar combinations, making it ideal for applications where casing floatation, frac sleeves, toe sleeves, and wet shoe cementing completion techniques are utilized.
Features and Benefits
• Can be supplied in various combinations and is available in all grades of steel and desired API or Premium thread connections
• Specialty engineered protected valve spring design ensures positive sealing in vertical, horizontal and deviated wells
• Performance proven, tested in-house using our precision fabricated Flow Loop, exceeding API RP 10F III C ratings
• Exceptional quality control measures, including full traceability documentation of MINOTAUR component materials
• Compatible with all mud types (WBM-OBM-SBM) • Non-cement construction • Fully PDC drillable • Reliable top fill float check valves that provide well control while running
casing
Specifications Description Imperial Metric Valve Size 2.50 in 63.5 mm
For Casing Sizes 5.0, 5-1/2, 6.0 in 127.0, 139.7, 152.4 mm Inlet Diameter 2.00 in 50.8 mm Inlet Flow Area 3.14 in2 20.26 cm2
Outlet Flow Area 4.91 in2 31.68 cm2 ** Flow Rate 10 - 12 bbls/min 1.6 - 1.9 m3/min
Valve Body & Seat Material PDC Drillable Aluminum Spring Material Phosphorus Bronze
Spring Force 5 lbs 2 kgs Service Temperature Rating 400° F 204° C
Back Pressure Rating 10,000 psi 68,948 kPa
** Tested to 16 bbls/min (2.5 m3/min)
50
Gryphon Oilfield Solutions
For more details on our products and services, contact our team of Application Specialists and Technical Representatives:
USA Corporate Headquarters Canadian Office & Distribution Center
1-800-816-720 1-800-604-1290
http://www.gryphonoilfield.com http://www.gryphonoilfield.com
mailto:[email protected] mailto:[email protected]
51