product news Reliable level detection of dry plastic ... · PDF fileMounting adapter G 11/2POM...
-
Upload
vuongtuyen -
Category
Documents
-
view
217 -
download
4
Transcript of product news Reliable level detection of dry plastic ... · PDF fileMounting adapter G 11/2POM...
fluid sensorsand diagnostic
systems
positionsensors
networkingand control
Highest EMC immunity achieved throughpatented noise-immune electronics.
Simple pushbutton adjustmentto the medium.
Indication of the switching statusby LEDs on the side and back.
Resistant toelectrostatic discharges.
Front installation on sight glasses withgranulate temperatures up to 110 °C.
of dry plastic granulates.Reliable level detection
Capacitive level sensors specificallyfor the plastic processing industry.
product news
Flu
id s
enso
rs a
nd
dia
gn
ost
ic s
yste
ms
Requirements for level monitoringWherever plastic granulates are conveyed and processedcapacitive proximity switches are used to monitor levels inpipes and in silos or through sight glasses in loaders oninjection moulding machines. The sensor must reliablydetect a wide range of plastics in spite of differences inthe material, residual moisture and temperature. More-over, the grain size and surface characteristics of the basicsubstances vary considerably.
Application sensor for the plastic industryThe new M30 capacitive level switch was specially devel-oped to meet the requirements mentioned above. Thanksto the intelligent microprocessor technology even pre-dried granulates can be reliably detected. Optimum sensi-tivity adjustment to suit the medium is made automatical-ly by the press of a pushbutton. The front face of thesensor is rated for temperatures up to 110 °C and can bemounted in direct contact with the sight glass. The time-consuming setting of an air gap is no longer necessary.Due to its mechanical structure the sensor is speciallyimmune to the electrostatic discharges which occur when-ever plastics are conveyed.The user has the choice between DC and AC units. Theuniversal switching output can be programmed to be ei-ther NC or NO. Two highly visible LEDs clearly indicate thelevel from distance.
E11036
E11078
E11033
E11034
E11035
E10077
E10737
Mounting clamp
Angle bracket
Mounting adapter G 11/2 POM
Mounting adapter G 11/2 PVDF
Mounting adapter G 11/4 POM
Mounting adapter G 11/4 PVDF
Protective cover
5 m (PVC), M12 straight, 4-pole
5 m (PVC), 1/2", straight
E10662
E10191
2 x yellowgreenred
typ. 5
-25...80, 110 active face
IP 67
PPS, PP
M12 connector 1/2"-UNF connector
ifm
ifm
10...36 DC
250
•
•
< 2.5
< 30
Operating voltage [V]
Current rating [mA]
Short circuit protection, pulsed
Rev. pol. protection/overl. prot.
Voltage drop [V]
Current consumption [mA]
Function display
Switching status LEDOperating status LEDSwitching hysteresis LED
Switching frequency [Hz]
Operating temperature [°C]
Protection
Housing material
Connection
Wiring diagram
programmableprogrammable
KN5120
Output
Order no. KN0004
30...250 AC
continuous, 250 (...+40 °C) / 200 (...+80 °C)peak, Î: 1.5 A (20 ms / 0.5 Hz)
–
–
< 10
typ. < 1.7
Fine settingIncreased noise immunityProgramming via pushbutton
36
81,573
60
5
programming button
M30
x1,5
M12
x1
92,5
LED
3 LED
Flu
id s
enso
rs a
nd
dia
gn
ost
ic s
yste
ms
M30 designFunction displayProtection rating IP 67
Dry bulk material
nf = detection through the vessel wall
Accessories
Description Order no.
Dimensions
Application
Mounting
Electrical design
Connection
DC PNP AC
R
Level sensors
Sockets
Sockettype Order no.Design
Example: KN5120
Visit our website: www.ifm-electronic.comWe
rese
rve
the
right
to
mak
e te
chni
cal a
ltera
tions
with
out
prio
r no
tice.
Prin
ted
in G
erm
any
on n
on-c
hlor
ine
blea
ched
pap
er. K
E129
/200
4
2
3
L1
N
2
L
L+1
4
3
2
L
L+3
4
1