Product list 08/09 - WinStar.com.pk · Product and For detailed information on product ......

Product list

08/09

2

Notes and explanations

Specifications We use the normal commercial terminology, differentiating between approval and performance grade.

Approval Lubricants are specifically approved by the respective manufacturers (e.g. Mercedes- Benz). NOTE: In some cases product approval is only for certain viscosity classes. For further details, please see our respective product documentation.

Performance grade The lubricant meets the respective approval requirements, without specific product approval by the manufacturer. NOTE: In some cases performance grade is only for certain viscosity classes. Product and For detailed information on product properties, applications, utilization and warning texts,security data sheets please refer to the respective product and security data sheets. These data sheets are available on request.

Important It is essential to comply with the manufacturer's instructions for the respective engines/motors, machinery, plant or components!

Drum codes The standard drum delivery sizes are indicated for each product. Other drum sizes are available on request.

Oils, general products C = Intermediate bulk container (IBC), 900 kg F = Normal drum (original size), 180 kg (140 – 230 kg) T = Keg (small drum), 50 kg (45 – 60 kg) KA = Can, 20 kg (20 – 25 kg) 5L = Can, 5 litre 1L = Can, 1 litre Greases K = Drum, 17 kg K15 = Drum, 15 kg K5 = Drum, 4.5 kg D1 = Can, 900 g D = Can, 500 g P 500 = Cartridge, 500 g P 400 = Cartridge, 400 g

Special products 0.5L = Flask, 0.5 litre 0.25L = Flask, 0.25 litre 0.05L = Flask, 0.05 litre Sprays SD 750 = Spray can, 750 ml SD 500 = Spray can, 500 ml SD 300 = Spray can, 300 ml SD 200 = Spray can, 200 ml

Note: Drum weights may vary according to specific weight of the product. The effective net weight is marked on the drum label.

Product list 2008/2009

3

Page Designation of page as search help

4 4-stroke engine oils, run-in oils 5 4-stroke engine oils – automobiles and light commercial vehicles 7 4-stroke engine oils – mixed fleets, heavy diesel engines 8 4-stroke engine oils – heavy diesel engines 4-stroke engine oils – motorcycles (see page 53 and 54) 9 2-stroke engine oils (2-stroke engine oils for moto bikes see also page 53 and 54) 10 Gas engine oils, STOU (Super Tractor Oil Universal)

11 Gear oils 13 Automatic Transmission Fluids (ATF) 14 UTTO (Universal Tractor Transmission Oil) 15 Special gear oils 16 Industrial gear oils 17 Industrial gear oils, food-compatible H1 industrial gear oils 18 Radiator protection agents 19 Automotive additives 20 Automotive lubricant additives, sundry

21 Machine oils, oils for spindles 22 Hydraulic oils (single-grade) 23 Hydraulic oils (multigrade) 24 Hydraulic fluids, fully synthetic, environmentally compatibile, fire-resistant 25 Food-compatible H1 hydraulic fluids, plug oils, flushing oils, additives

26 Slideway lubricants, industrial lubricants 27 Turbine oils, compressor lubricants 28 Refrigeration compressor lubricants, food-compatible H1 compressor oils 29 Oils for vacuum pumps, heat transfer oils 30 Transformer oils 31 Oils for pneumatic power tools, steam cylinder oils 32 Oils for the food and textile industries, silicone oils, sundry 33 Chain lubricants, food-compatible H1 chain drive oils 34 Forming oils, separating oils, food-compatible H1 separating oils 35 Corrosion inhibiting oils 36 Cleaning agents, solvents 37 Nanotechnology products 38 Sprays 39 Food-compatible H1 sprays

40 Wire-drawing and spark erosion (EDM) oils 41 Grinding, honing, lapping and stamping oils 42 Deep-drawing, metal-forming oils 43 Machining oils 44 Hardening oils 45 Cooling oils (colloiding) 46 Cooling oils (colloiding), grinding water concentrates, press water additives 47 Additives, cleaning agents, antifoaming agents

48 Greases 50 Food-compatible H1 greases 51 Pastes 53 2-stroke engine oils, 4-stroke engine oils – off-roader 54 2-stroke engine oils, 4-stroke engine oils – street machines, scooter, ATV 55 Motorcycle gear oils, fork and shock-absorber oils 56 Clean and care for motocycles

Product list 2008/2009

4

PANOlIN SAE Properties/applications

PREMIUM Run-in oil for petrol and diesel engines. 00170 30 Application: also as motor oil for oldtimers up to about 1945. 00200 40 00230 50 Drum codes: C, F, T, KA

NOVA Single-grade oil for non-supercharged petrol and diesel engines00370 20W/20 for vehicles from around 1946 until 1976.00400 30 Also suitable for compressors.00430 40 00460 50 Drum codes: C, F, T, KA

EXTRA DIESEl Single-grade oil for use in stationary diesel engines, also super- 00660 10W charged, hydraulic systems, gear drives and compressors. 00720 20W/20 00780 3000840 40 Drum codes: C, F, T, KA

SAMURAI Semi-synthetic multi-grade for petrol and diesel engines. 02020 10W/40 Ideal all-season oil for mixed fleets. Drum codes: C, F, T, KA, 1L

TARGET High-viscosity mineral-based oil for older petrol engines in 02460 20W/50 automobiles and motorcycles. Drum codes: C, F, T, KA, 5L

4-stroke engine oils, run-in oils

Performance grade API SB.

API SF/CD.Approval:Steyr A.

ACEA E1/E2.API CG-4/SH.Approvals:MTU oil category 2.Saurer 81/116.Steyr C.ZF TE-ML 02C, 03B, 04B.

ACEA A3/B4, E3, E5.API CH-4/5J.

ACEA A3/B3.API SL/CF.

5


AVANIS SV-X Synthetic lowSAPS light-running oil for petrol and diesel 02670 5W/30 powered automobiles. Specially developed for VW Group vehicles with or without extended oil-change interval and exhaust treatment system. Drum codes: C, F, T, KA, 1L

AVANIS C1 Synthetic lowSAPS light-running oil for petrol and diesel 02675 5W/30 powered automobiles (also with exhaust treatment systems). Specially for current Ford, Jaguar and Mazda models. Drum codes: C, F, T, KA, 1L

AVANIS C2 Synthetic lowSAPS light-running oil for petrol and diesel02680 5W/30 powered automobiles (also with exhaust treatment systems). Specially for current Peugeot and Citroën models. Drum codes: C, F, T, KA, 1L

AVANIS C3 Synthetic lowSAPS light-running oil for petrol and diesel02685 5W/30 powered automobiles (also with exhaust treatment systems). Specially for current Mercedes-Benz, Hyundai, Kia, Nissan, Renault, Suzuki, etc models. Drum codes: C, F, T, KA, 1L

EXClUSIVE GO Synthetic light-running oil for all petrol and diesel engines 02740 5W/30 (also with exhaust treatment systems) in all current Opel models. Extended oil-change intervals possible. Drum codes: C, F, T, KA, 1L

EXClUSIVE MAX Fully synthetic light-running oil for petrol and diesel engines 02805 5W/30 in automobiles and light commercial vehicles. Specifically for vehicles requiring engine oils to ACEA A5/B5 (e.g. Mazda, Iveco Daily) Drum codes: C, F, T, KA

EXClUSIVE VAS Fully synthetic light-running oil for VW vehicles with LongLife 02830 0W/30 with LongLife service (also for direct-injection diesel engines) and Volvo automobiles. Drum codes: C, F, T, KA, 1L

Footnote: *valid also for Audi, Seat, Skoda

4-stroke engine oils – automobiles and light commercial vehicles

Performance grade

ACEA A3/B4, C3.Approvals: *VW 504 00, *VW 507 00.

ACEA A5/B5, C1. JASO DL-1. Ford WSS-M2C934-A,WSS-M2C913-B.

ACEA A5/B5, C2. API SL/CF.

ACEA A3/B4, C3. API SL/CF.Approval: Mercedes-Benz 229.51.

ACEA A3/B4. API SL/CF.Approvals: GM-LL-A-025, GM-LL-B-025.

ACEA A5/B5.API SL/CF.

ACEA A5/B5. *VW 503 00,*VW 506 00, *VW 506 01.

6


DAYTONA 5W/40 Fully synthetic light-running oil for petrol and diesel engines 03090 5W/40 in automobiles and light commercial vehicles. For VW Pumpe-Düse diesel engines without LongLife-Service. Drum codes: C, F, T, KA, 1L

DAYTONA 10W/40 Semi-synthetic light-running oil for petrol and diesel engines03100 10W/40 in automobiles and light commercial vehicles. Also for motorcycles (4-stroke) with oil-bath clutch.

Drum codes: C, F, T, KA, 1L

INDY Synthetic light-running oil for petrol and diesel engines 03170 5W/30 in automobiles and light commercial vehicles. 03250 10W/40 Drum codes: C, F, T, KA, 1L

INDY SV Synthetic light-running oil for petrol and diesel engines 03255 5W/40 in automobiles and light commercial vehicles.


RACING SYNTH Fully synthetic high performance oil for all petrol and diesel 03270 0W/40 engines in automobiles. 03300 5W/40 03600 20W/50 Drum codes: C, F, T, KA, 5L: 03600, 1L: 03300

RACING SYNTH DC Fully synthetic high performance oil for all petrol and diesel 03650 0W/30 engines in automobiles.


Footnote: *valid also for Audi, Seat, Skoda

4-stroke engine oils – automobiles and light commercial vehicles

Performance grade ACEA A3/B3.API SL/CF. Approvals: Mercedes-Benz 229.1.*VW 505 00, *VW 505 01.

ACEA A3/B3.API SL/CF.Approvals: Mercedes-Benz 229.1. Porsche pnp GL. *VW505 00.

ACEA A3/B4. API SL/CF.Approvals: Mercedes-Benz 229.1. Porsche pnp GL.

ACEA A3/B4.API SL/CF.Approvals: Mercedes-Benz 229.3. Porsche ncp GL. *VW 502 00, *VW 505 00.

ACEA A3/B4.API SL/CF.Approvals: Mercedes-Benz 229.1. *VW 502 00, *VW 505 00.

ACEA A3/B4.API SL/CF.Approvals: BMW Longlife-Öl. Mercedes-Benz 229.3. *VW 503 01.

7


UNI 10W/20 Mineral based oil originally for universal use in hydraulic systems04100 and engines, but today with limited applications as engine oil. For hydraulic systems of excavation machinery. Drum codes: C, F, T, KA

UNIVERSAl lC Mineral oil based universal engine oil for older petrol and diesel04200 15W/40 engines, also supercharged.

Drum codes: C, F, T, KA

UNIVERSAl VO Mineral oil based oil for heavily loaded diesel engines,04510 15W/40 also supercharged, and for older petrol engines. Enables longer oil change intervals with heavy diesel engines.


UNIVERSAl FE Semi-synthetic oil for diesel and petrol engines. 05280 10W/30 Universal engine oil for mixed fleets.05300 10W/40 Enables longer oil change intervals with heavy diesel engines.

Drum codes: C, F, T, KA, 1L: 05300

UNIVERSAl FE-X Synthetic engine oil for diesel and petrol engines. 05350 10W/40 Universal engine oil for mixed fleets. Enables longer oil change intervals with heavy diesel engines. Suitable for Euro -4 diesel engines.


4-stroke engine oils – mixed fleets, heavy diesel engines

Performance grade

ACEA A3/B3, ACEA E2.API CG -4/SJ.

ACEA A3/B3, ACEA E2. API CG-4/SJ. Approval: Volvo VDS.

ACEA A3, B4, ACEA E7. API CI-4/SL. Approvals: Cummins CES 20076, Cummins CES 20077, Cummins CES 20078. Renault RLD, RLD-2(pending). Volvo VDS 3.

ACEA A3/B4, ACEA E3, E5. API CH-4/SJ.Approvals: MAN M 3275. Mercedes-Benz 228.3, Mercedes-Benz 229.1.Steyr D1.

ACEA A3/B4, ACEA E5, E7. API CI-4/SL.Scania LDF-II, VDS-3.Approvals:MAN M 3275. Renault RLD, RLD-2.

8


DIESEl HTE Semi-synthetic multi-grade oil for all diesel engines. 05600 10W/40 Enables much longer oil change intervals with heavy diesel engines.


DIESEl SYNTH EU-4 Synthetic lowSAPS fuel-economy oil for diesel engines, 05820 10W/40 specifically for the latest EURO 4/5 generation. Specifically for diesel engines with exhaust treatment systems.


BIOMOT lD Fully synthetic rapidly biodegradable long-life oil for high 07405 10W/40 performance diesel engines with long oil change intervals. Water hazard classification: WGK-1 acc. VwVwS. Drum codes: C, F, T, KA

4-stroke engine oils – heavy diesel engines

Performance grade

ACEA B3, B4, ACEA E4, E7. API CI-4.Approvals: MAN M 3277. Mercedes-Benz 228.5. MTU oil category 3. Renault RLD-2, RXD. Scania LDF. Volvo VDS-3.

ACEA E4, E6, E7.Approvals: MAN M 3277 low ash, MAN M 3477. Mercedes-Benz 228.51. MTU oil category 3, MTU oil category 3.1. Renault RXD.

ACEA *B4.ACEA *E4, *E6. API CH-4. *analog

9


EXTRA DIESEl DD Detroit Diesel 2-stroke engine oil with low sulphate ash 14520 30 content (0.87 %). 14590 40 Drum codes: C, F, T, KA

2-STROKE Sl Synthetic red coloured 2-stroke petrol engine oil. 15300 Ensures clean and largely fume-free combustion. Mixing ratio up to 1:50 (2 %).


2-STROKE RACING Special 2-stroke petrol engine oil for go-karts, model cars and 15400 aircraft, with outstanding lubrication properties. Mixing ratio: see respective manufacturer's instructions.


2-STROKE SYNTH Fully synthetic blue-coloured oil developed for high performance 15600 2-stroke petrol engines. Ensures dependable lubrication even under the toughest conditions. Mixing ratio up to 1:100 (1 %).


AQUASYNTH Fully synthetic rapidly biodegradable 2-stroke petrol engine oil15800 for water-cooled outboard engines. Ensures dependable lubrication and largely fume-free combustion. Mixing ratio up to 1:100 (1 %). Water hazard classification: WGK-1 acc. VwVwS. Biodegradable (CEC L–33–T–82/A–93). Drum codes: C, F, T, KA, 1L

2-stroke engine oils

Performance grade API CF-2. Detroit Diesel 2-stroke, Series: 53, 71, 92, 149. API TC.ISO-L-EGD. JASO FC.

API TC. ISO-L-EGD. JASO FC.

API TC. ISO-L-EGD. JASO FC.

NMMA TC-W3(National Marine Manufacturers Association).

10


GASMO M Low-ash lubricating oil for non-supercharged low-sulphur 16040 30 gas engines. 16060 40 Sulphate ash content: 0.40 %. 16100 15W/40 TBN: 4.9 mg KOH/g Drum codes: C, F, T, KA

GASMO KG 6 Lubricating oil for sewer gas engines; medium ash content. 16120 30 Sulphate ash content: 0.70 % 16130 40 TBN: 6.0 mgKOH/g Drum codes: C, F, T, KA

GASMO KG 8 Lubricating oil for sewer gas engines; medium ash content. 16140 30 Suitable for use with sewer gas demanding an oil with high 16160 40 neutralization capacity. 16200 15W/40 Sulphate ash content: 0.87 % TBN: 8.5 mgKOH/g Drum codes: C, F, T, KA

GASMO D Engine oil for commercial vehicles fuelled by Compressed 16790 15W/40 Natural Gas (CNG) or methane, or by liquefied Petroleum Gas (LPG) or propane-butane mixture. Sulphate ash content: 0.80 % TBN: 8.2 mgKOH/g


STOU STOU for engines, gearboxes, hydraulics and dynamic brakes 17400 10W/30 on earth-moving machinery and tractors. 17600 15W/30 17800 15W/40 Drum codes: C, F, T, KA

UNITRAC STOU for engines, gearboxes, hydraulics and dynamic brakes 17880 10W/40 on earth-moving machinery and tractors.


Note: For further tractor lubricants – see also page 14

Gas engine oils, STOU (Super Tractor Oil Universal)

Performance grade

API CD.

API CD.

API CD.

API CF-4. Approval: MAN M 3271-1.

API CE/SF, API GL-4.Approvals: ZF TE-ML 06B, 07B.

API CE/SF, API GL-4.

11


EP GEAR Mineral-based gear oil for transmission and differentials in20700 80W commercial vehicles, automobiles, earth-moving, forestry and agricultural machinery.21050 80W/90 EP GEAR 80W/90 is a multigrade oil suitable for a wide temperature range. Drum codes: C, F, T, KA

SUPER DUTY Mineral-based heavy-duty gear oil primarily for highly loaded 22500 90 hypoid drives and gearboxes. 22750 80W/90 SUPER DUTY 80W/90 and 85W/140 are multigrade oils22900 85W/140 suitable for a wide temperature range.


TOPGEAR Universal gear oil for axle drives and gearboxes in commercial 23300 80W/90 vehicles, automobiles, earth-moving, forestry and agricultural machinery. Ensures perfect gearbox synchronisation and optimal protection against hypoid axle drive wear even under extreme loading. Drum codes: C, F, T, KA

TRANSGEAR Semi-synthetic longlife light-running gear oil for extended oil 23600 75W/80W change. Also for use in ZF intarders. Oil change intervals up to 300'000 km. Drum codes: C, F, T, KA

TRANSSYNTH Fully synthetic light-running gear oil for extended oil change23650 75W/85W intervals in mechanical gearboxes. Oil change intervals up to 300'000 km Drum codes: C, F, T, KA

SUPER DUTY SPECIAl Semi-synthetic universal gear oil for synchro gearboxes 23750 75W/90 and axle drives in automobiles. Drum codes: C, F, T, KA

Gear oils

Performance grade API GL-4. MIL-L-2105. Approvals: Mercedes-Benz 235.1. ZF TE-ML02A, 16A, 17A, 19A.

API GL-5. MIL-L-2105 D.Approvals: Mercedes-Benz 235.0. ZF TE-ML 05A, 16C, 17B,19B.

API GL-4/5. MIL-L-2105,MIL-L-2105 D.Approvals: ZF TE-ML 02B, 05A, 12E, 16C, 17B, 19B.

API GL-4. MIL-L-2105.Approvals: MAN 341 Typ Z-3. ZF TE-ML 02D.

API GL-4/5. MIL-L-2105, MIL-L-2105 D.

API GL-4/5. MIL-L-2105, MIL-L-2105 D.

12


SUPER DUTY SYNTH Fully synthetic heavy-duty gear oil for synchro gearboxes 25000 75W/90 and axle drives in commercial vehicles and automobiles. 25200 75W/140


SUPER DUTY SYNTH MB Fully synthetic heavy-duty gear oil for synchro gearboxes 25300 75W/90 particularly the Mercedes-Benz Actros series. Drum codes: C, F, T, KA

SUPER DUTY SYNTH AXT Fully synthetic high performance gear oil for heavy-duty25301 75W/90 gearboxes and axle drives. Drum codes: C, F, T, KA

SUPER DUTY lS Special heavy-duty gear oil for rear axles with differential lock. 25550 90 Contains LS (limited slip) additives preventing knock and rattle 25590 85W/140 in self-locking differentials.


SUPER DUTY SYNTH lS Fully synthetic high performance gear oil for synchro gearboxes 25650 75W/90 and axle drives with differential lock (limited slip). 25700 75W/140 Contains LS (limited slip) additives largely preventing knock and rattle in self-locking differentials.


SUPER DUTY MOS Special heavy-duty gear oil with molybdenum disulphide (MoS2) 25900 80W/90 additive for extremely heavy loading. 25920 85W/140 Drum codes: C, F, T, KA

Gear oils

Performance grade API GL-4/5. MIL-L-2105, MIL-L-2105 D.Approvals: ZF TE-ML 02B, 05B, 12B, 16F, 17B, 19C.

API GL-4. MIL-L-2105.ZF TE-ML 02D, 07A Approval:Mercedes-Benz 235.11.

API GL-5.Mercedes-Benz 235.8.

API GL-5. LSD (Limited Slip Differential). MIL-L-2105 D.Approvals: Dornier. ZF TE-ML 05C, 12C, 16E.

API GL-4/5. LSD (Limited Slip Differential). MIL-L-2105, MIL-L-2105 D.

API GL-5. MIL-L-2105 D.

13

PANOlIN Properties/applications

ATF MUlTI 21996 ATF for the GM Dexron II D specification. 26050 Application: automatic transmissions and servo steering in automobiles, commercial vehicles and earth-moving machinery, stepless drives, hydraulic systems and fluid flywheels. Drum codes: F, T, KA

ATF SPMH Special ATF for Mitsubishi and Hyundai automatic transmissions. Drum codes: F, T, KA

ATF DEXRON III ATF for the GM Dexron I I I G specification.26150 Application: automatic transmissions and servo steering in automobiles, commercial vehicles and earth-moving machinery, stepless drives, industry hydraulic systems. Drum codes: F, T, KA, 5L

ATF SYNTH Fully synthetic ATF for the GM Dexron II E specification. 26400 Application: automatic transmissions and servo steering in automobiles, commercial vehicles and earth-moving machinery with extended oil changes. Drum codes: F, T, KA

Automatic Transmission Fluids (ATF)

Performance grade Allison C-4. GM Dexron I I D. Approvals: Mercedes-Benz 236.6. Voith Turbo G 607.ZF TE-ML 04D, 11A, 17C.

Hyundai SP, SP II und SP III. Mitsubishi SP, SP II und SP III.

Allison C-4.GM Dexron I I I G. Approvals: Mercedes-Benz 236.1, 236.5. Voith Turbo G 607.ZF TE-ML 02F, 03D, 04D, 11B, 14A, 17C. Allison C-3/C-4. GM Dexron II E. Approvals: Mercedes-Benz 236.8. Voith Turbo G 607, G 1363. ZF TE-ML 04D, 09X, 14B, 16L.

14

PANOlIN ISO VG Properties/applications

HY-TRAN-FlUID-S UTTO for tractors, agricultural and earth-moving machines. 26660 32 – 46 Applications: machines with central lubrication of gearbox, axle drives, hydraulic systems and wet brakes. Drum codes: C, F, T, KA

JD 303 High-performance wide-range UTTO for tractors, agrimotos, etc. 26700 46 – 68 and earth-moving machines. Applications: machines with central gearbox lubrication, axle drives, hydraulic systems and wet brakes.


UNIFARM 308 High-performance wide-range UTTO for tractors, agrimotos, etc. 26720 68 –100 and earth-moving machines. Applications: machines with central gearbox lubrication, axle drives, hydraulic systems and wet brakes.


HMO 324 UTTO with high viscosity for tractors, agrimotos, etc. 26740 100 and earth-moving machines. Applications: Wet brakes /differential locks and axles with extreme thermal loading and wear conditions. Drum codes: C, F, T, KA

BIOFlUID ZFH Fully synthetic environmentally compatibile UTTO lubricant for26820 68 combined use in gearboxes, axles, hydraulic systems and retarders in agricultural and earth-moving machinery. Environmental compatibility: Blue Angel. Water hazard classification: WGK-1 acc. VwVwS.


BIOFlUID lS Fully synthetic environmentally compatibile lubricant for axles 26825 68 in agricultural and earth-moving machinery. Drum codes: C, F, T, KA

UTTO (Universal Tractor Transmission Oil)

Performance grade API GL-4. Case I.H. B6.

API GL-4. John Deere JDM J20 C.New Holland 410 B. Approvals: ZF TE-ML 05F, 06K.

API GL-4. John Deere JDM J20 C. Massey Ferguson M 1135, M 1141.

API GL-4.Approval: Volvo WB 101 97303.

Approvals: ZF TE-ML 03H, 06G, 07E.

Approval: ZF TE-ML 05H.

15


TOCAT 4 Special lubricant for Caterpillar powershift gearboxes, winches, 27040 10W hydraulic retarders, differentials, clutches and final drives. 27080 30 27120 50 Drum codes: C, F, T, KA

Special gear oils

Performance grade Caterpillar TDTO, TO-2, TO-4.

16


IG ClP High grade lubricant for industrial drives. 27210 150 For industrial drives in machine tools, elevators, 27220 220 conveyor systems and calenders. 27230 320 27240 460 27260 1000 Drum codes: C, F, T, KA, 5L: 27220

EP GEAR SYNTH Fully synthetic rapidly biodegradable high-duty gear oil for 27325 100 industrial drives, roller and sleeve bearings. 27330 150 27335 220 27340 320 27345 460 Drum codes: C, F, T, KA

EP GEAR SYNTH VTD Fully synthetic and rapidly biodegradable industrial oil 27410 30 specially developed for VOITH torque converters. Drum codes: C, F, T, KA.

SYNTHGEAR Fully synthetic polyglycol based industrial gear oil with additives 27550 68 for high performance industrial gear drives. 27600 100 Not mixable with mineral oils – flush before filling. 27650 150 27700 220 27750 320 27800 460 Drum codes: C, F, T, KA

Industrial gear oils

Performance grade

DIN 51'517-3/CLP. FZG A 16.6/140: >load level 12.

DIN 51'517-3/CLP(norm for mineral oil).FZG A 16.6/140: load level 12 Approval: Flender. DIN 51'517-3/CLP(norm for mineral oil).

DIN 51'502/CLP PG, DIN 51'517-3/CLPwithout Fe 8 test (norm for mineral oil).

17

PANOlIN Visc. Properties/applications

TECSYNTH Ultra high performance long-life synthetic industrial gear oil 28050 15 based on PAO. 28060 22 Applications: for high performance bearings, gears and28070 32 circulation systems at very high, very low or widely fluctuating28080 46 temperatures. 28090 68 28100 100 28110 150 28120 220 28130 32028140 46028150 680 Drum codes: C, F, T, KA

TECSYNTH (GL-5) Ultra high performance synthetic industrial gear oil based on 28210 75W/90 PAO,with additives against corrosion and wear. Application: central lubrication in Sulzer weaving machines G6200/L9400. Drum codes: C, F, T, KA

ORCON® GEAR Fully synthetic H1gear oil for the pharmaceutical, food and 28250 150 animal feed industries. 28260 220 Applications: heavy-duty bearings, gear drives and circulation 28270 320 systems at very high, very low or widely fluctuating temperatures.28280 460 28290 680


Industrial gear oils, food-compatible H1 industrial gear oils

Performance grade DIN 51'517-3/CLPwithout Fe 8 test (norm for mineral oil). FZG A 8.3/90:load level 12.Approvals: Arburg injection moul-ding machines. Smit Textile.

API GL-5. FZG A 8.3/90: >load level 12.Approval: Sulzer Textil.

DIN 51'517-3/CLPohne Fe 8 Test (norm for mineral oil). FDA CFR 178.3570. FZG A 16.6/140: >load level 12. Approvals: Arburg injection moul-ding machines. Halal certificate.Kosher certificate.NSF/H1.

18


ANTI-FROST MT-30 Blue antifreeze agent on ethylene-glycol basis. 29000 Protects radiators against frost and corrosion. Drum codes: F, T, KA

ANTI-FROST MT-325 Nitrite-free, blue antifreeze agent on ethylene-glycol basis, 29050 ideal for aluminium engine blocks. Protects radiators against frost and corrosion. Drum codes: F, T, KA

ANTI-FROST PF-20-N Nontoxic, turquoise coloured anti-freeze on propylene-glycol 29060 basis for use in heating and cooling systems. Protects radiators against frost and corrosion. Drum codes: F, T, KA

ANTI-FROST MT-575 Silicate-free, long-life antifreeze agent on ethylene-glycol basis, 29070 pink colour. Protects radiators against frost and corrosion. Ideal for aluminium engine blocks. Note: mixable with VW G11 and G12 antifreeze agents such as ANTI-FROST MT-325. Drum codes: F, T, KA

Radiator protection agents

Performance grade

Mercedes-Benz 325.2.

VW TL 744-C,VW G 11. Approvals: Mercedes-Benz 325.0. MTU MTL 5048.

Mercedes-Benz 325.3. MTU MTL 5048. VW TL 774-F, VW G 12 Plus.

19


FUEl ADDITIVE Cleaning and anti-wear additive for petrol and diesel engines. 29200 Binds condensate water. Dosing: 1 % Drum codes: C, F, KA, 5L

AUTOPlUS Lead replacement additive in handy 250 ml bottle with integral 29210 dosing device. Gives unleaded petrol similar characteristics to leaded fuel. Application: add each time when refuelling Dosing: 1 %; one dose per 25 l petrol Drum code: 0.25L

KS 85–50 Conservation additive for engine, gearbox and hydraulic system 29250 oils, etc. Enables interior conservation of engines, gearboxes and hydraulic systems for 6 -12 months. Dosing: 30 % in oil without additives, 10 % in oil with additives Drum codes: C, F, T, KA

WINWASH Blue, isopropyl alcohol based screen washing concentrate. 29300 Dosing: summer 10 %, winter 30 – 50 % Drum codes: C, F, KA

Automotive additives

Performance grade

DIN 51'357, DIN 51'358,DIN 51'359.

20


MOS Molybdenum disulphide (MoS2) additive for heavily loaded 29500 gear oils. Dosing: 5 %


lS PlUS 1 Additive concentrate for gear oils, used in locking differentials 29550 demanding limited slip properties. Dosing: 2.5 %


lHM Green, mineral oil based hydraulic fluid for hydro-pneumatic 29700 suspension systems and hydraulic brakes, etc. Application: e.g. in Citroën automobiles and New Holland agricultural machinery. Drum codes: C, F, T, KA

BRAKE 22 High grade paraffin-based brake fluid.29720 Application: in brake systems demanding mineral oil based brake fluids. Drum codes: C, F, T, KA, 1L

Automotive additives, sundry

21


H 800 Paraffin-based mineral oil free of additives, with good oxidation30560 resistance. For driving gear on old railcars. Drum codes: C, F, T, KA

HMS Low-odour machine oil ideal for use in excursion steamships 30670 150 with open machine-room. 30680 220 Drum codes: C, F, T, KA

INDOl Mineral oil based zinc-free industrial lubricant. 30910 32 Applications: in compressors, vacuum pumps, roller and sleeve30940 46 bearings, and in hydraulics systems not requiring EP hydraulic 30970 68 oils.31000 100 31030 150 31060 220 31090 32031120 460 Drum codes: C, F, T, KA

TECOl Mineral oil based zinc-free lubricant for high-speed spindles 31300 2 on machine tools and textile machinery.31360 5 Also suitable for hydraulics systems. 31420 10 Drum codes: C, F, T, KA

Machine oils, oils for spindles

Performance grade DIN 51'501/L-AN, DIN 51'517-1/C. ISO 6'743-1/L-A.

DIN 51'501/L-AN, DIN 51'517 -1/C. ISO 6'743-1/L-A.

DIN 51'506/VB/VBL, DIN 51'517-2/CL,DIN 51'524-1/HL. ISO 6'743-4/L-HL, ISO 6'743-6/L-CB.

DIN 51'517-2/CL, DIN 51'524-2/HLP. ISO 6'743-2/L-F.

22


HlP Z Mineral oil based zinciferous industrial/hydraulic oil. 31735 32 Applications: hydraulic systems for industrial machinery, lightly 31740 46 loaded gear drives, presses and compressors. 31745 68 Drum codes: C, F

SAMURAI HlP Mineral oil based zinc-free industrial/hydraulic oil. 31764 32 Applications: for hydraulic systems of earth-moving machinery, 31766 46 machine tools and injection moulding machines, industrial plant,31768 68 lightly loaded gear drives, presses, compressors and autohoists. Drum codes: C, F

HlP Mineral oil based zinc-free industrial/hydraulic oil. 31950 15 Applications: for hydraulic systems of earth-moving machinery, 31980 22 machine tools and injection moulding machines, industrial plant, 32010 32 lightly loaded gear drives, presses, compressors and autohoists.32040 46 32070 68 32100 100 32130 15032190 320 Drum codes: C, F, T, KA

HlP PlUS High grade mineral oil based zinc-free industrial hydraulic oil.33170 22 Greatly extends oil-change intervals. 33180 32 Applications: high performance injection moulding machines,33190 46 presses and hydraulic systems. 33200 68


Hydraulic oils (single-grade)

Performance grade

DIN 51'524-2/HLP. ISO 6'743-4/L-HM.Approval: Engel.

DIN 51'524-2/HLP. ISO 6'743-4/L-HM.

DIN 51'524-2/HLP. ISO 6'743-4/L-HM.Approvals: Arburg.Rexroth RD 90 220.

DIN 51'524-2/HLP. ISO 6'743-4/L-HM.Approvals: Arburg.Engel.Krauss Maffei.Rexroth RD 90 220.

23


HVlP Z Mineral oil based zinciferous HVLP hydraulic/industrial oil.33235 32 Contains an additive which improves viscosity-temperature 33240 46 behaviour. Applications: in hydraulic systems subject to extreme temperature variations. Drum codes: C, F

SAMURAI HVlP Mineral oil based zinc-free multigrade hydraulic oil. Contains 33264 32 an additive which improves viscosity-temperature behaviour. 33266 46 Applications: in hydraulic systems subject to extreme temperature variations.


HlP UNI Mineral oil based zinc-free multigrade hydraulic oil with an 33300 15 additive greatly improving the viscosity index for use over 33350 22 extreme temperature ranges. 33400 32 Applications: in hydraulic systems subject to extreme temperature33450 46 variations. 33500 68 33550 100 Drum codes: C, F, T, KA

HVI-R Red, mineral oil based zinc-free multigrade hydraulic oil with 33760 46 an additive greatly improving the viscosity index for use over extreme temperature ranges. Applications: e. g. in hydraulic systems of snow smoothers. Drum codes: C, F, T, KA

Hydraulic oils (multigrade)

Performance grade

DIN 51'524-3/HVLP. ISO 6'743-4/L-HV.

DIN 51'524-3/HVLP. ISO 6'743-4/L-HV.

DIN 51'524-3/HVLP. ISO 6'743-4/L-HV.Approval:Rexroth RD 90 220.

DIN 51'524-3/HVLP. ISO 6'743-4/L-HV.

24

Performance grade DIN 51'524-3/HVLP(norm for mineral oill).

Approval: Rexroth RD 90 220.

ISO 15'380/HEES. VDMA 24'568/HEES.Approvals:Approved by numerous manufacturers.

ISO 15'380/HEES.

VDMA 24'317.FZG A 8.3/90:load level 12.Meets test requirements of the 7th Luxemburg Report.

ISO 15'380/HEES.


POWERSYNTH S High grade zinc-free synthetic hydraulic/industrial oil. 33880 15 Enables much longer oil change intervals. 33910 46 Applications: high-pressure injection moulding machines, 33920 68 hydraulic systems and presses. Drum codes: C, F, T, KA

HlP SYNTH Fully synthetic zinc-free rapidly biodegradable hydraulic fluid35020 15 on saturated ester basis. Enables much longer oil change 35030 22 intervals «lifetime filling». 35040 32 Applications: mainly as hydraulic oil for earth-moving, forestry 35050 46 and industrial machinery, steelwork and hydraulic structures. 35060 68 Environment-compatibility: Blue Angel. Czech Eco-Label. 35070 100 Japan Environment Association Eco Mark. Korea Eco-Label. Swedish Standard. Water hazard classifications: nwg/WGK-1 acc. VwVwS. Drum codes: C, F, T, KA

HlP SYNTH E Fully synthetic, zinc-free environment-considerate hydraulic fluid 35630 22 on saturated ester basis using naturally regenerative resources. 35635 32 For hydraulic applications where hydraulic fluids complying 35640 46 with the European Eco Label are prescribed. Environment-compatibility: European Eco Label. VAMIL regulations. Water hazard classifications: nwg/WGK-1 acc. VwVwS. Drum codes: C, F, T, KA

HYDROSAFE 1 Fire-resistant zinc-free water/ethylene glycol based hydraulic oil 35700 46 type HFC. Applications: wherever the fire risk of conventional hydraulic fluids endangers life and property, e.g. for hydraulic systems in mines, foundries and steelworks.


ATlANTIS 17 Fully synthetic zinc-free rapidly biodegradable hydraulic fluid, 36011 on saturated ester basis. For hydraulic systems in the oil/gas drilling and production industries. Environment-compatibility: CEFAS (UK), SFT (Norway), SODM (Holland) Water hazard classifications: nwg/WGK-1 acc. VwVwS. Drum codes: C, F, T, KA

Hydraulic fluids, fully synthetic, environmentally compatibile, fire-resistant

25


ORCON® HYD Fully synthetic zinc-free H1 lubricant for the food, animal feed 37040 15 and pharma industries. 37070 22 Applications: Hydraulics systems, compressors and drives in 37100 32 machinery directly in contact with foods and pharmaceutica. 37130 46 37160 68 37190 10037220 150


H VP 8612 Paraffin-based high-purity plug oil for the glassmaking industry. 38055 Drum codes: C, F, T, KA

ORCON® VITRA 150 Food-compatible high-purity H1 plug oil for the glassmaking 38155 industry.


HYDROFlUSH 32 Fully synthetic, rapidly biodegradable zinc-free flushing oil 39710 Applications: for flushing when replacing conventional hydraulic/industrial oils with PANOLIN HLP SYNTH. Note: for detailed instructions on oil replacement, please see: PANOLIN HLP SYNTH oil change guidelines. Never use as hydraulic fluid! Drum codes: C, F, T, KA

ANTI-QR Hydraulic fluid additive, that effectively suppresses squealing 39925 and stick-slip in hydraulic cylinders on plant and machinery. Applications: both for mineral and synthetic hydraulic fluids. Dosing: 1 %.

Drum code: 1L

Food-compatible H1 hydraulic fluids, plug oils, flushing oils, additives

Performance grade DIN 51'517-3/CLP, DIN 51'524-3/HVLP(norm for mineral oil). FDA CFR 178.3570. FZG A 8.3/90:load level 12.Approvals: Halal certificate.Kosher certificate. NSF/H1. Rexroth RD 90 220.

Approval: Halal certificate.Kosher certificate. NSF/H1.

26


MECANO Mineral oil based industrial/slideway oil.40135 32 Applications: for high-duty industrial drives, slideways, spindles 40140 46 hydraulics systems, machine tools with combined lubrication 40145 68 of hydraulics and slideways.40150 100 40155 150 40160 220 40165 320 40170 460 40175 68040180 1000 Drum codes: C, F, T, KA, 5L: 40145, 40160

SlIDEWAY Mineral oil based slideway oil. 41035 32 Applications: for combined slideway/hydraulics systems, 41045 68 horizontal and vertical slideways and guideways in machine 41060 220 tools, injection moulding machines, grinding machines, plastics presses, etc. Drum codes: C, F, T, KA, 5L: 41045, 41060

Slideway lubricants, industrial lubricants

Performance grade DIN 51'502/CGLP, DIN 51'517-3/CLP.FZG A 16.6/140: load level 12.ISO 6'743-6/L-CC, ISO 6'743-13/L-G.

DIN 51'502/CGLP, DIN 51'517-3 CLP, DIN 51'524-2/HLP.

27


TURWADA Mineral oil based turbine oil. 42030 32 Applications: lubrication, bearing and governor oil in water, 42060 46 steam and gas turbines.42090 68 42120 100 Drum codes: C, F, T, KA

TURWADA S 220 ll Fully synthetic, environment-considerate turbine/governor oil42174 on saturated ester basis using naturally regenerative resources. For open lubrication points on older water turbines. Environment-compatibility: European Eco Label. VAMIL-Regulations.


TURWADA SYNTH Fully synthetic rapidly biodegradable lubricant specially for 42330 32 hydroelectric machinery requirements. 42360 46 Applications: lubrication, bearing and governor oil in water- 42390 68 turbines. 42420 100 Environment-compatibility: Blue Angel. Water hazard classification: WGK-1 acc. VwVwS. Drum codes: C, F, T, KA

TURWADA SYNTH E Fully synthetic, environment-considerate turbine/governor oil 42466 46 on saturated ester basis using naturally regenerative resources. Applications: lubrication, bearing and governor oil in water- turbines. Environment-compatibility: European Eco Label (pending). Water hazard classification: WGK-1 acc. VwVwS.


COMPRESS Mineral-oil based compressor lubricant. 43035 32 Applications: for reciprocating, screw and centrifugal 43040 46 compressors. 43045 6843048 *87 43050 100 43055 15043060 220 43065 320 Drum codes: C, F, T, KA, 5L: 43035, 43040

COMPRESS SYNTH Fully synthetic compressor lubricant. 43135 32 Applications: for reciprocating, screw and centrifugal compres- 43140 46 sors. Service life 4 to 6 times longer than mineral oils. 43145 68 43150 100 Drum codes: C, F, T, KA

Footnote: *87 is not classified under ISO VG

Turbine oils, compressor lubricants

Performance grade DIN 51'515/TD, DIN 51'524-1/HL. ISO 6'743/5 T, ISO 6'743/4HL.

DIN 51'506 VB, VBL, VC, VCL, VDL.ISO 6'743/3 A D.

DIN 51'506 VB, VBL, VC, VCL, VDL (norm for mineral oil). ISO 6'743/3 A D.

28


ORCON® COMP Synthetic H1compressor lubricant for the pharmaceutical, food 43635 32 and animal feed industries. 43640 46 Applications: for reciprocating, screw and centrifugal compres- 43645 68 sors. 43650 100 43655 150


ARCTIC Mineral-oil based refrigeration compressor oil. 44035 32 Applications: for refrigerator compressors using ammonia or 44040 46 halogenized hydrocarbon refrigerant. 44045 68 44050 10044055 150 Drum codes: C, F, T, KA

ARCTIC SYNTH Fully synthetic refrigeration compressor oil. 44135 32 Applications: refrigeration compressors using R12, R 22 or 44140 46 R114 refrigerant. 44145 68 44150 100 44160 220 44170 460 Drum codes: C, F, T, KA

ARCTIC SPECIAl Fully synthetic refrigeration compressor oil on polyalkylene glycol- 44338 *40 basis. 44350 100 Applications: refrigeration compressors using R 134a refrigerant (FCHC-free). Drum codes: C, F, T, KA

SNOWCOMP 46 Fully synthetic rapidly biodegradable compressor lubricant. 44440 Applications: for compressors of snowmaking machines and snow cannons. Drum codes: C, F, T, KA

Footnote: *40 is not classified under ISO VG

Refrigeration-, food-compatible H1 compressor lubricants

Performance grade DIN 51'506 VB, VBL, VC, VCL, VDL (norm for mineral oil). FDA CFR 178.3570.Approval: Halal certificate.Kosher certificate. NSF/H1.

DIN 51'503 KA. ISO 6'743/3 B D.

DIN 51'503 KA, KC.ISO 6'743/3B D.Approval: Burckhardt Compres-sion AG, Switzerland.

DIN 51'506 VB, VBL, VC, VCL, VDL (norm for mineral oil). ISO 6'743/3 A D, ISO 15'380. Approval:Aeberhardt Compair.

29


VACPUMP-OIl 46 Mineral-oil based vacuum pump oil. 45140 Applications: Alfa Laval milking machines Drum codes: C, F, T, KA

VACPUMP-OIl 125 Mineral-oil based vacuum pump oil. 45153 Applications: high-vacuum plants and diffusion pumps.

MT OIl Mineral-oil based heat transfer oil. 46030 22 Applications: with nitrogen blanketing, this oil is suitable for feed 46035 32 temperatures up to 320 °C. 46040 46 46045 68 46050 10046055 15046060 220 Drum codes: C, F, T, KA

MT SYNTH 250 ll Synthetic inhibited heat transfer oil. 46130 Applications: with nitrogen blanketing, this oil is suitable for feed temperatures up to 320 °C. 3 to 5 times longer service life than mineral oil based products. Drum codes: C, F, T, KA

MT SYNTH SH Synthetic inhibited heat transfer oil. 46150 Applications: with nitrogen blanketing, this oil is suitable for feed temperatures up to 350 °C. 3 to 5 times longer service life than mineral oil based products. Drum codes: F, T

ORCON® TEMP 32 Synthetic H1 heat transfer oil for the pharmaceutical, food and46414 animal feed industries. Applications: with nitrogen blanketing, this oil is suitable for feed temperatures up to 330 °C. Drum codes: C, F, T, KA

Oils for vacuum pumps, heat transfer oils

Performance grade DIN 51'506 VB, VBL.

DIN 51'506 VB, VC.

DIN 51'522 Q.ISO 6'743-12/L-Q.

DIN 51'522 Q.ISO 6'743-12/L-Q.

30

PANOlIN *Visc. Properties/applications

TRAFO C1 Naphthenic based transformer oil. 47100 16.0 Applications: in transformers, rectifiers and switchgear.

Drum codes: F, T, KA

TRAFO C2 As TRAFO C1, except: 47130 6.8 non-inhibited. TRAFO C3 As TRAFO C1, except: 47160 8.0 but lower viscosity.

TRAFOSYNTH 2 Fully synthetic rapidly biodegradable transformer oil. 47230 13.2 Applications: in transformers, rectifiers and switchgear. Water hazard classification: nwg acc. VwVwS. Drum codes: C, F, T, KA

General note Since dielectric strength depends on humidity rather than on Transformer oils transformer oil insulation quality, the breakdown voltage cannot be guaranteed.

Footnote: * = viscosity at 40 °C

Transformer oils

Performance grade

SEV class I.

SEV class II. IEC-BS 148/1972.

IEC 296 (82) class I and II. VDE 0370, part 1, class A.

SEV class II.Breakdown voltage (IEC 2.5 mm): 60 kV

31


CONTACT Mineral oil based lubricant for pneumatic tools. 48035 32 Applications: industrial pneumatic tools and rams, line oilers 48040 46 in demolition/drilling hammers.48050 10048060 220 48077 *800 CONTACT 800 is mainly used for lubricating gear and chain drives.


CONTACT E Mineral oil based lubricant for pneumatic tools. 48135 32 The emulgent properties ensure good compatibilty with winter conditions (prevents icing). Applications: industrial pneumatic tools and rams, line oilers in demolition/drilling hammers.


CONTACT SYNTH 22 Fully synthetic rapidly biodegradable pneumatic tool oil.48230 Binds condensate water (prevents icing) for excellent compatibilty with winter conditions. Applications: industrial pneumatic tools and rams, line oilers in demolition/drilling hammers. Important: Do not mix with mineral oil – flush system before use. May attack acrylic sightglasses. Water hazard classification: WGK-1 acc. VwVwS. Drum codes: C, F, T, KA, 5L

SICURA ZX High-viscosity steam cylinder oil.49080 1000 Applications: cylinder lubrication for superheated or wet steam.49085 1500 49088 *1800 Drum codes: C, F, T, KA

Footnote: *800 and 1800 are not classified under ISO VG

Oils for pneumatic power tools, steam cylinder oil

32


WHITE-OIl H1 Colourless, tasteless and odourless white oil for the food, animal 50125 15 feed and pharmaceutical industries. 50145 68 Applications: for lost-oil lubrication systems on machinery. Drum codes: C, F, T, KA

TEXTIl E Mineral-oil based textile machine lubricant with a special 51045 68 additive enabling it to be washed out easily.51050 100 Application: in textile machines where removability is required.51055 15051060 220 Drum codes: C, F, T, KA

TEXTIl VE Colourless white-oil based textile machine lubricant with a51125 15 special additive enabling it to be washed out easily.51140 46 Application: in textile machines where colourlessness and removability are required. Drum codes: C, F, T, KA

TEXTIl SYNTH 60 Fully synthetic textile machine oil. 51244 Application: for projectile lubrication in looms with felt-feed lubrication. Drum codes: C, F, T, KA

SIlICONE OIl 200 Special lubricant based on limpid polydimethyl siloxanes. 52058 Applications: forming oil, water-repellent and parting or sliding agent.


PENlUBE Universal lubricant and penetrating oil with good rust-loosening 53050 properties. Also available as spray 59200. Drum codes: C, F, T, KA, 5L

Oils for the food and textile industries, silicon oils, sundry

Performance grade NSF/H1.

33


CHAINlUBE H Mineral-oil based chain lubricant for chainsaws. 54010 For all-season use. Drum codes: C, F, T, KA, 5L

CHAINlUBE B 80 Fully synthetic rapidly biodegradable high performance 54030 chainsaw oil. Applications: all seasons. Drum codes: C, F, T, KA, 5L

CHAINlUBE B 120 As CHAINLUBE B 80. 54034 Applications: mainly for summer use in forestry harvesters under tough conditions.

CHAINlUBE SYNTH Fully synthetic high performance chain lubricant. 54150 100 Applications: wire ropes, chain conveyors, guideways,54160 220 escalators. 54170 460 Drum codes: C, F, T, KA, 5L

CHAINlUBE SYNTH HT Fully synthetic heat-resistant chain oil containing various 54250 solid lubricants. Applications: wire ropes, chain conveyors (particularly at high temperatures), dryers, shrinkage tunnels. Drum codes: C, F, T, KA

CHAINlUBE SYNTH HTO High-viscosity fully synthetic heat-resistant chain oil. 54265 320 Contains no solid lubricants. Applications: wire ropes, chain conveyors (particularly at high temperatures), dryers, shrinkage tunnels. Drum codes: C, F, T, KA

ORCON® CHAIN Fully synthetic H1 chain lubricant for the food, animal feed and54810 5 pharmaceutical industries. 54825 15 Applications: wire ropes, chain conveyors, guideways. 54845 68 ORCON® CHAIN 5 and 15 are ideal for low temperature 54850 100 applications such as in cold storage depots and shock freezers54855 150 Drum codes: C, F, T, KA, 5L: 54825, 54850, 54855

Chain lubricants, food-compatible H1 chain drive oils

Performance grade

FDA CFR 178.3570.Approvals:Halal certificate.Kosher certificate. NSF/H1.

34


FORM HO Forming oil, ready-to-use. 55020 Applications: for steel and wooden shuttering. Drum codes: C, F, T, KA

FORM AOT 10 Universal forming oil, VOC-free, ready-to-use. 55060 Applications: for steel and wooden shuttering, concrete elements and fairing. Ideal for mixer protection. Drum codes: C, F, T, KA

FORM SIlENT Bitumen separating agent, rapidly biodegradable, ready-to-use. 55090 Applications: for all highway surfacing (also sound-insulating); as separating agent for surfacing machines and truck bodies.


FORM SYNTH Forming oil, rapidly biodegradable, ready-to-use. 55100 Applications: wooden, plastic and steel shuttering at normal outdoor temperatures, also suitable as separating agent for truck trailers. Water hazard classification: WGK-1 acc. VwVwS.


FORM SYNTH BT Parting agent, ready-to-use.55140 Mainly for use in cement mixing machines. Infiltrates water and forms a protective film to hinder corrosion and facilitate cleaning dirty machine components. Drum codes: C, F, T, KA

FORM TOPSYNTH Synthetic heat-resistant rapidly biodegradable bitumen 55200 separating agent. Applications: truck trailers, steel rollers and road surfacing machines.


FORM C Water-miscible rapidly biodegradable bitumen separating 55400 concentrate. Applications: for rubber-tyred road-roller spray systems. Dosing: 1 – 3 %

Drum codes: C, F, KA

ORCON® TEF OIl 17 Food-compatible PTFE universal lubricant for the food, animal55870 feed and pharmaceutical industries. Applications: as parting agent; on conveyors, for belts and lost-oil lubrication. Drum codes: C, F, T, KA

Forming oils, separating oils, food-compatible H1 separating oils

Performance grade

FDA CFR 178.3570.Approval:NSF/H1 (pending).

35


ARC-FlUID DW Water displacement fluid containing solvents. On workpiece 56000 immersion water is immediately removed from the metal surface and collects on the bottom of the immersion tank. Drum codes: C, F, KA

ARC-FlUID l 10 Rust inhibitor containing solvents; forms a dry, nonadhesive,56055 elastic and transparent film. Application: rough or machined ferrous and non-ferrous metals, e.g. tools, saws, containers, wire, springs, dies, bearings. Drum codes: C, F, T, KA

ARC-FlUID W 25 VOC-free, rapidly biodegradable water-based rust inhibitor. 56120 Forms a dry, non-adhesive, elastic and transparent film after water evaporation. Application: for bare metal wire, springs, moulds, sheeting, etc. as well as workpieces, tools and equipment. Water hazard classification: WGK-1 acc. VwVwS.


ARC-FlUID Wl 3 VOC-free, ready-to-use aqueous rust inhibitor solution. 56170 Forms an extremely thin transparent and touch-proof film. Application: for bare metal wire, springs, moulds, sheeting, etc. as well as workpieces, tools and equipment. Also for machined workpieces not yet dry. Drum codes: C, F, KA

ARC-FlUID XR 230 Long-term rust inhibitor for metal surfaces. Forms a dark elastic 56410 film exceptionally resistant to salt water and salt spray. Application: for vehicles and agricultural implements. Drum codes: C, F, T, KA

Corrosion inhibiting oils

Thickness of film

1.0 µm

2.5 µm

0.3 µm

23 µm

36


INTRAClEAN N Fast-drying cold-cleaning fluid, ready-to-use, for small parts,57000 contains solvents. Drum codes: C, F, T, KA

INTRAClEAN ND Odour-optimized cold-cleaning fluid, ready-to-use, for small parts,57020 contains solvents. Drum codes: C, F, T, KA

INTRAClEAN Vl Practically odourless non-drying cleaning fluid for small parts, 57060 free of solvents. Also suitable for ultrasonic cleaning systems thanks to high flashpoint (100 °C). VOC-free.


INTRAClEAN BT Special cleaning agent containing solvents for removing bitumen 57080 and cement from construction machinery and equipment.


NITRO 201 Universal nitrothinner. 57110 Drum codes: F, T, KA

WASCHBENZIN Benzol-free gasoline for industrial cleaning purposes.57160 Drum codes: F, T, KA

PETROl lP Practically odourless petroleum spirit.57180 Drum codes: F, T, KA

ACETON Solvent. 57190 Applications: cleansing. Drum codes: F, T, KA

MYSTIC 20 Water-based universal cleaner, nontoxic, solvent-free. 57200 Applications: for engines, chassis, machinery, wheels, floors and tarpaulins. VOC-free. Drum codes: F, KA, 5L

Cleaning agents, solvents

37


NANO TECH Nanotechnology based car interior cleaning and protectingCOCKPIT FOAM agent. Significantly reduces dirt adhesion to rubber and plastic 58000 surfaces and keeps them clean longer Note: not suitable for open porous leather. Drum code: SD 300

NANO TECH Perfect window sealing thanks to nanotechnology. WINDOW SEAlING SET Causes rain to bead up and roll off glass surface. 58020 Greater safety thanks to better visibilitiy, particularly on dark rainy nights. Easy removal of dirt, insects and ice. Set: Basic cleaner 50 ml, Sealer 35 ml, 2 polishing cloths

NANO TECH Nanotechnology based wheel-sealer gives steel and aluminiumWHEEl-SEAlER wheels long-therm resistance to water, oil and dirt. Brake dust58040 no longer sticks to the wheels and can be washed away easily. Drum code: SD 200

Nanotechnology products

38


SPECIAl GREASE SPRAY Fully synthetic, universal lubricating grease with excellent 59000 adhesion properties and extreme water resistance. Applications: sleeve, roller and articulated bearings, screw- drives, universal joints, guide rollers, etc. Temperature range: –30 °C to 120 °C. Also available as bulk grease 74050. Drum code: SD 500

MUlTIlUBE SPRAY Colourless universal lubricant spray with excellent penetration 59020 and adhesion properties. Applications: machinery and precision-mechanics, joints and couplings, door locks and hinges, etc. Temperature range: –30 °C to 180 °C. Drum code: SD 500

CHAINlUBE SPRAY Transparent rapidly biodegradable chain lubricant spray with 59040 excellent penetration and adhesion properties. Applications: chain link bearings, roller and ball-bearings, gear and worm drives, all types of joints and couplings, etc. Temperature range: –35 °C to 200 °C. Biodegradability: > 90 % to CEC–L–33–T–82. Drum code: SD 500

ZMO GREASE SPRAY Black viscous-adhesive bituminous lubricating grease with 59060 excellent emergency running properties. Applications: Chain conveyors, open drives, gearwheels, racks, and swivelling cranes. Temperature range: –30 °C to 150 °C, emergency running up to 400 °C Drum code: SD 500

PENlUBE SPRAY Universal lubricating oil with good rust-loosening and penetration 59200 properties. Also available as bulk liquid 53050. Drum code: SD 500

BRAKE ClEANER SPRAY For cleaning and degreasing metals, glass and ceramic, 59300 particularly for brake parts and discs. Drum code: SD 750

Sprays

39


SIlICONE H1 SPRAY Antistatic universal dust-repellent preservation agent containing 59410 silicon. NSF-approved for use in the food, animal feed and pharma industries. Applications: for the care and protection of plastic and rubber parts. Temperature range: up to 250° C.

Drum code: SD 500

FORM H1 SPRAY Silicon-free lubricant and parting agent.59700 NSF-approved for use in the food, animal feed and pharma industries. Tasteless and compatible with beer foam. Temperature range: –35° C to 220° C. Drum code: SD 500

TEF OIl H1 SPRAY Universal light-coloured PTFE oil spray.59730 NSF-approved for use in the food, animal feed and pharma industries. Applications: for lubricating guiderails, drives and sleeves. Temperature range: up to 250° C. Drum code: SD 500

TEF GREASE H1 SPRAY White PTFE aluminium-complex soap based lubricating grease. 59750 NSF-approved for use in the food, animal feed and pharma industries. Applications: general lubrication. Temperature range: –10° C to 120° C (briefly up to 180°C). Drum code: SD 500

Food-compatible H1 sprays

Performance grade

FDA CFR 178.3570.Approval:NSF/H1.




40


INTRA DOC 32 Wire-Draw oil for fine and medium gauges Drum codes: C, F, T, KA

INTRA DOS 5 Synthetic wire-draw oil for superfine and ultrafine gauges Drum codes: C, F, T, KA

INTRA EOC 4 EDM oil (dielectric medium) based on a low-viscosity low-aromat distillate Drum codes: C, F, T, KA

INTRA EOM 2 *Thin EDM oil (dielectric medium) Drum codes: C, F, T, KA

INTRA EOS 3 Thin synthetic EDM oil (dielectric medium)

INTRA EOS 4 EDM oil (dielectric medium) on a low-viscosity low-aromat synthetic basis Drum codes: C, F, T, KA

General noteThese machining oils are chlorine-free, light-coloured and VOC-free, exept as *marked. VOC = Volatile Organic Carbon. The first letter stands for the application, e.g. INTRA DOC 32 = wire-Drawing

The second letter stands for the material or operation stage; e.g. INTRA DOC 32 = NO specific material allocation

A – AluminiumB – Nonferrous metals (German: Buntmetall)F – Normal machining; Ferrous metals, grey or malleable cast iron, low-alloy machining steel, structural steel, case hardening and heat-treatable steelsO – NO specific material allocation R – Heavy machining: Stainless steel, high-alloy steel, chrome-nickel steel (German: Rostfreier Stahl)X – EXtreme machining: Manganese, nickel, titanium, manganese-silicon steel, silicon steel, chrome-molybdenum steels.

The third letter is part of our internal production code

The number stands for product viscosity, e.g. INTRA DOC 32 = ISO class VG 32 INTRA EOC 4 = viscosity at 40 °C (no ISO-class)

Footnote: *not VOC-free

Wire-drawing and spark erosion (EDM) oils

Pr. Nr.

60014

60104

60203

60220

60242

60243

41


INTRA GOC 5 Grinding oilsINTRA GOC 10 Drum codes: C, F, T, KA

INTRA GOM 3 Grinding oils based on a low-viscosityINTRA GOM 7 aromat-free special distillate Drum codes: C, F, T, KA

INTRA GOS 4 Synthetic grinding oil with excellent flushing properties Drum codes: C, F, T, KA

INTRA HOC 22 Special Honing oil for SUNNEN honing machines Drum codes: C, F, T, KA

INTRA lOS 5 Synthetic lapping oil with excellent precipitating properties for use with ultra-fine lapping powder Drum codes: C, F, T, KA

INTRA PAC 2 *Very thin Punching oil, exclusively for use with sheet aluminium up to 1.5 mm thick

INTRA PAC 3 *Thin punching oil, exclusively for use with sheet aluminium Drum codes: C, F, T, KA

INTRA PRC 2 *Very thin high-additive punching oil for thin miniature components

INTRA PRC 68 High-additive punching oil for stainless steel Drum codes: C, F, T, KA

INTRA PXC 100 High-performance punching oil for very demanding applications, such as machining surgical steel Drum codes: C, F, T, KA

Footnote: *not VOC-free

Grinding, honing, lapping and stamping oils

Pr. No.

6030460308

6032260326

60343

60412

60544

60600

60602

61300

61318

61520

42


INTRA TFC 22 Deep-draw oils, (German: Tiefzugöl) INTRA TFC 320 Drum codes: C, F, T, KA

INTRA TRS 700 Synthetic high-viscosity deep-draw oils Drum codes: C, F, T, KA

INTRA TXC 320 High-viscosity deep-draw oil Drum codes: C, F, T, KA

INTRA UAC 4 Thin metal-forming oil, (German: Umformöl) Drum codes: C, F, T, KA

INTRA UFS 20 Synthetic metal-forming oils, ideal for minimal-lubricant INTRA UFS 25 requirements Drum codes: C, F, T, KA

INTRA URC 68 High-additive metal-forming oils INTRA URC 780 Drum codes: C, F, T, KA

SAMURAI INTRA Z 10 Cutting oils, (German: Zerspanungsöle) for machining large parts

SAMURAI INTRA Z 22 Drum codes: C, F, T, KA

INTRA ZBC 10 Cutting oils, (German: Zerspanungsöle) for machining small parts

INTRA ZBC 22 For all automatic machine-tools

INTRA ZBC 32 As INTRA ZBC 22, but also for use in hydraulic systems Drum codes: C, F, T, KA

INTRA ZBM 22 Cutting oil on special distillate basis Ideal for use on all automatic machine-tools Drum codes: C, F, T, KA

INTRA ZFC 4 Low-viscosity cutting oil

INTRA ZFC 10 Cutting oils for machining small parts

INTRA ZFC 22 For use on all automatic machine-tools

INTRA ZFC 68 For machining large workpieces, and thread-cutting Drum codes: C, F, T, KA

Deep-drawing, metal-forming oils, machining oils

Pr. No.

6211262126

62431

62526

62703

6321163213

63318 63331

6370863712

63908

63912

63914

63962

64103

64108

64112

64118

43


INTRA ZFM 18 Cutting oils on special distillate basis, for use with INTRA ZFM 22 all automatic machine-tools Drum codes: C, F, T, KA

INTRA ZFS 40 Synthetic rapidly biodegradable cutting oil ideal for machining galvanized drinking-water piping, etc. Drum codes: C, F, T, KA

INTRA ZRC 7 High-additive cutting oil for use on all automatic machine-INTRA ZRC 10 toolsINTRA ZRC 22

INTRA ZRC 46 High-additive cutting oils for machining larger workpieces and thread-cutting INTRA ZRC 68 High-additive cutting oils for machining big workpieces Drum codes: C, F, T, KA, 5L: 64318

INTRA ZXC 10 High-additive cutting oil or machining miniature components Drum codes: C, F, T, KA

INTRA ZXM 22 High-additive cutting oil on special distillate basis for machining surgical steel Drum codes: C, F, T, KA

Machining oils

Pr. No.

64161

64162

64215

643066430864312

64316

64318

64508

64562

44


HARDlUBE SPECIAl Blank hardening oil for small to medium size parts. 64810 Applications: mainly for continuous throughput ovens. Drum codes: C, F, T, KA

HARDlUBE E Hardening oil for medium to large size parts, can be washed out 64820 with water. Applications: mainly in hardening baths. Drum codes: C, F, T, KA

HARDlUBE SC Partly synthetic blank hardening oil for small to medium size 64830 parts. Much longer service life and less oil contamination than mineral oil based products. Applications: mainly for continuous throughput ovens. Drum codes: C, F, T, KA

Hardening oils

Viscosity at 40 °C 31.5

22.6

20.3

45


INTRACOOl COMPA C-05 Water-miscible universal coolant on mineral-oil basis. 65100 Properties: skin-friendly, free of nitrite, amines, chlorine and. boron. Applications: for all machining work, for cutting tools with interior cooling. Materials: low and high alloy steels, cast iron, aluminium and nonferrous metals. Drum codes: C, F, T, KA

INTRACOOl COMPA C-24 As INTRACOOL COMPA C-05, except: Contains boron and 65300 amines. Also for cutting tools with high-pressure interior cooling.


INTRACOOl COMPA C-26 As INTRACOOL COMPA C-24, except: Free of boron and 65400 amines.


INTRACOOl EVO P-04 Semisynthetic water-miscible coolant. 65630 Properties: skin-friendly, free of nitrite, chlorine, secondary amines and amides. Applications: for all machining work including rotary, flat and interior grinding, also for cutting tools with high-pressure interior cooling. Materials: low and high alloy steels, cast iron, aluminium and nonferrous metals. Drum codes: C, F, KA

INTRACOOl EVO P-06 As INTRACOOL EVO P-04, except: Application: also for interior 65660 grinding. Drum codes: C, F, KA

Cooling oils (colloiding)

Water hardness

suitable for all hardnesses

>12 °d

up to 12 °d



46


INTRACOOl XENA S-04 Fully synthetic water-miscible high performance coolant. 65800 Properties: free of mineral oil, nitrite and chlorine, dermatologi- cally neutral, and has a pleasant fresh odour. Applications: for all machining work (except hight-pressure work). Materials: low and high-alloy steels, cast iron, aluminium and nonferrous metals.

Drum codes: C, F, KA, 5L

INTRACOOl XENA S-06 As INTRACOOL XENA S-04, except: 65900 Applications: also for all tools with high-pressure interior cooling Materials: specifically for aluminium, also for low-alloy steels, cast iron and nonferrous metals.


INTRACOOl SHINE G-04 Fully synthetic transparent coolant concentrate. 67000 Drum codes: C, F, KA

PREWAT C-05 Water-miscible mineral-oil press water additive. 68050 Application: for aqueous hydraulic systems and light machining. .


PREWAT S-03 Fully synthetic nitrite-free multifunctional press water additive. 68210 Applications: in cooling systems and water-based hydraulic circuits, also as grinding coolant, and partly in heating systems with nonferrous pump components. Drum codes: C, F, KA

PREWAT S-04 Fully synthetic nitrite-free press water additive. 68220 Applications: in water-based hydraulic circuits.


Cooling oils (colloiding), grinding water concentrates, press water additives

Water hardness


>15 °d





47


AlUPOWER Additive for water-miscible coolants to improve aluminium69030 machining performance. Dosing: 0.1 % – 3 % (depending on machining operation) Drum codes: C, F, T, KA

SR 2 Cleaner/disinfectant for water-miscible coolants.69210 Dosing: 1 % (up to 3 % if heavily polluted) Drum codes: C, F, T, KA, 1L

ANTI BAC Anti bacteria, fungus and yeast concentrate for water-miscible69250 cutting fluids. Dosing: 0.1 – 0.2 % Drum codes: 5L, 1L

ANTIFOAM COMPA Antifoaming concentrate for mineral oil based water-miscible 69380 coolants. Dosing: 0.2 – 1 ‰ Drum codes: C, F, T, KA, 1L, 0.5L, 0.05L

ANTIFOAM EVO Antifoaming concentrate for mineral oil and partly synthetic based 69390 water-miscible coolants. Dosing: 0.2 – 1 ‰

Drum codes: C, F, T, KA, 1L, 0.5L, 0.05L

ANTIFOAM XENA Antifoaming concentrate for synthetic-based water-miscible 69400 coolants. Dosing: 0.2 – 1 ‰ Drum codes: C, F, T, KA, 1L, 0.5L, 0.05L

ANTIFOAM 46 Antifoaming additive for hydraulic systems, compressors 69430 and drives. Dosing: 0.2 ‰ Drum codes: C, F, T, KA, 1L, 0.5L, 0.05L

Additives, cleaning agents, antifoaming agents

48


EP GREASE 0 Universal beige coloured multipurpose lithium complex-soap. 70430 Applications: for central greasing systems and gear drives requiring grease lubrication. Drum codes: F, T, K, K15, K5, D1

EP GREASE 2 Universal beige coloured multipurpose lithium complex-soap. 70450 Applications: for sleeve and roller bearings, machine and chassis lubrication. Drum codes: F, T, K, K15, K5, D1, P 400

lT GREASE 000 Partly synthetic green/blue lubricating grease with excellent 70610 low-temperature behaviour. lT GREASE 00 Applications: for central greasing systems and for gear drives 70620 requiring grease lubrication.

Drum codes: F, T, K, K15, K5, D1

MOlYGREASE 23 Anthracite coloured high pressure lithium-soap based lubricating70950 grease containing MoS2 solid lubricant. Applications: for articulated joints, sleeve bearings and other lubricating points requiring emergency running properties (e.g. for vibrating and shock loads). NLGI-class: 2 Drum codes: F, T, K, K15, K5, D1, P 400

HT GREASE 2 Special high-temperature lithium complex-soap based lubricating 71050 grease.HT GREASE 3 Applications: for lubricating points at extremely high71060 temperatures, such as Telma brakes, drying tunnel bearings, bitumen laying machines and wheel bearings. Drum codes: F, T, K, K15, K5, D1, P 400

GRAPHITGREASE 2 Water-resistant black calcium-soap based grease with high 72050 graphite content. Applications: lubrication points, joints and guideways exposed to damp and/or dusty conditions. Drum codes: F, T, K, K15, K5, D1

Greases

Temperature range –30 °C to 110 °C

–20 °C to 120 °C

–35 °C to 100 °C –35 °C to 110 °C

–20 °C to 120 °C

–20 °C to 180 °C –10 °C to 180 °C

–30 °C to 60 °C

49


–30 °C to 120 °C,briefly and withfrequent re-greasing:up to 130 °C

–25 °C to 250 °C


BIOGREASE 2 Fully synthetic yellow coloured multipurpose grease, rapidly 72550 biodegradable. Applications: for greasing points on vehicles and earth-moving machinery, water turbine guidevane bearings and screw pumps in sewage treatment plants, etc. Drum codes: F, T, K, K15, K5, D1, P 400

SPECIAl GREASE 2 Fully synthetic yellow/greenish fluorescent universal lubricating 74050 grease with excellent adhesion properties and extreme water resistance. Applications: for long-term lubrication of heavy-duty swivel sleeve and roller bearings in earth-moving, forestry and agricultural machinery and industrial plant. Also available as spray 59000 Drum codes: F, T, K, K15, K5, D1, P 400

PYRA GREASE 2 Fully synthetic high-temperature white lubrication grease 77050 with extremely high drop-point and optimal thermal stability. Applications: for roller and sleeve bearings operating at very high temperatures. Drum code: D1

Greases

50


VA GREASE White, highly refined H1 vaseline. 77990 Applications: for apparatus and machine seals in the food, animal feed and pharma industries, for instruments and electrical contacts. Drum codes: F, T, K, K15, K5, D1

ORCON® GREASE 00 White fully synthetic H1 lubricating grease for the 78320 pharmaceutical, food and animal feed industries.ORCON® GREASE 0 Applications: for central greasing systems and gear drives78330 requiring grease lubrication. Drum codes: F, T, K, K15, K5, D1

ORCON® GREASE 1 White fully synthetic H1 lubricating grease for the 78340 pharmaceutical, food and animal feed industries.ORCON® GREASE 2 Applications: joints and rod guides, roller and sleeve bearings.78350 Drum codes: F, T, K, K15, K5, D1, P 400

ORCON® GREASE ClEAR 2 Colourless, transparent fully synthetic H1 lubricating grease for 78450 the pharmaceutical, food and animal feed industries. Tasteless and compatible with beer foam. Applications: long-term lubrication of spherical/plain bearings in bottle filling and washing, labelling and sealing plants, etc; lubrication of refrigeration machinery and apparatus. Drum codes: F, T, K, K15, K5, D1, P 400

ORCON® GREASE TEF 2 White fully synthetic PTFE-H1 lubricating grease 78650 for the pharmaceutical, food and animal feed industries. Application: for articulated joints, rod guides (stuffing boxes), roller and plain bearings. Drum codes: F, T, K, K15, K5, D1, P 400

Footnote: All products on this page are certified to NSF/H1

Food-compatible H1 greases

Temperature range

–20 °C to 100 °C –20 °C to 140 °C

–20 °C to 120 °C –20 °C to 140 °C

–50 °C to 160 °C

up to 200 °C

51


CU-HT GREASE Lubricating and parting paste containing copper, with out- 79390 standing high-temperature and anti-corrosion properties. Prevents seizing and fusion of parts. Applications: Threads, sparking plugs, brake-shoe pins, exhaust pipe fastenings.

Drum code: D

EXTREME 0 Lubricating, parting and chisel paste with special solid lubricants 79630 combination.EXTREME 1.5 Applications: Plug-in tools and wearing bushes on hydraulic and 79645 pneumatic hammers. Important: Compliance with the manufacturer's greasing plan is mandatory.

Drum codes: F, T, K, K15, K5, D1, P 400: 79630, P 500: 79645

Pastes


–25 °C to 900 °C

–30 °C to 1100 °C

52


OFF ROAD 2T BlEND Synthetic blend two-stroke engine oil for off-road motorcycles.94005 Applications: water and air-cooled 2-stroke petrol engines with or without catalyzer. Dosing: 1:50 (2 %) Drum codes: C, F, T, KA, 1L

OFF ROAD 2T RACE High performance two-stroke engine oil made of 100% synthetic94010 base oil. For high performance off-road motorcycles. Applications: water and air-cooled 2-stroke petrol engines with or without catalyzer. Dosing: 1:100 (1 %) Drum codes: C, F, T, KA, 1L

OFF ROAD 4T BlEND Synthetic blend four-stroke engine oil for off-road motorcycles.94025 10W/40 Drum codes: C, F, T, KA, 1L

OFF ROAD 4T SYNTH Synthetic four-stroke engine oil for off-road motorcycles.94035 10W/40 94037 15W/50 Drum codes: C, F, T, KA, 1L

OFF ROAD 4T RACE High performance four-stroke engine oil made of 100% synthetic94045 10W/50 base oil. Drum codes: C, F, T, KA, 1L

OFF ROAD 4T BIO RACE Rapidly biodegradable, high performance four-stroke engine oil94047 10W/50 made of 100% synthetic base oil. Drum codes: C, F, T, KA, 1L

2-stroke engine oils, 4-stroke engine oils – off-roaders

Performance grade

API TC.ISO-L-EGD.JASO FC.


JASO MA 2.

JASO MA 2.

JASO MA 2.

JASO MA 2.

53


STREET 4T BASIC Mineral oil based four-stroke engine oil for street bikes. 94055 10W/40 Drum codes: C, F, T, KA, 1L

STREET 4T BlEND Synthetic blend four-stroke engine oil for street bikes. 94065 10W/40 94067 15W/50 Drum codes: C, F, T, KA, 1L

STREET 4T SYNTH Synthetic four-stroke engine oil for street bikes. 94073 10W/40 94075 15W/50 Drum codes: C, F, T, KA, 1L

STREET 4T RACE High performance four-stroke engine oil made of 100% synthetic 94085 10W/50 base oil. Drum codes: C, F, T, KA, 1L

STREET 4T BIO RACE Rapidly biodegradable, high performance four-stroke engine oil94087 10W/50 made of 100% synthetic base oil. Drum codes: C, F, T, KA, 1L

SCOOTER 2T BlEND Synthetic blend two-stroke engine oil for scooters.94105 Applications: water and air-cooled 2-stroke petrol engines with or without catalyzer. Dosing: 1:50 (2 %) Drum codes: C, F, T, KA, 1L

SCOOTER 4T BlEND Synthetic blend four-stroke engine oil for scooters. 94120 10W/40 Drum codes: C, F, T, KA, 1L

ATV 4T BlEND Synthetic blend four-stroke engine oil for ATV’s and quads. 94155 10W/40 Drum codes: C, F, T, KA, 1L

2-stroke engine oils, 4-stroke engine oils – street machines, scooters, ATVs

Performance grade

JASO MA 2.

JASO MA 2.

JASO MA 2.

JASO MA 2.

JASO MA 2.


JASO MA 2.

JASO MA 2.

54


GEAR BlEND 10W/30 Synthetic blend manual transmission oil.94205 Applications: mopeds, scooters, motorcycles, ATVs, quads, etc. with separate engine and transmission lubrication.


GEAR HD SYNTH 15W/50 Synthetic heavy-duty transmission fluid for motorcycles.94210 Applications: mopeds, scooters, motorcycles, ATVs, quads, etc. with separate engine and transmission lubrication.


FORK SYNTH Synthetic shock-absorber fluid for motorcycles with standard or94255 5W cartridge type forks.94256 10W Drum codes: C, F, T, KA, 1L

Motorcycle gear oils, fork and shock-absorber oils

Performance grade

API GL-4.

55


AIR FIlTER OIl Air filter oil for foam and cotton filter elements on motorcycles, 94305 ATVs and quads. Effectively reduces intruding sand, dust and water. Also available as spray: 94620 Drum code: 1L

AIR FIlTER ClEANER Preparation cleaner, solvent-free cleaner for foam and cotton94505 filter elements. Biodegradable, water-based. Application: for precleaning foam and cotton filter elements prior to treating with AIR FILTER OIL. Drum code: 1L

MOTOBIKE ClEANER Biodegradable, water-based cleaner for motorcycles, mopeds, 94510 scooters, ATVs, quads, etc. Cleans thoroughly and reliably dissolves grime. Drum codes: 1L (pump bottle), 5L (Refill)

PROTECT & CARE SPRAY Protection and preservative spray for mopeds, scooters, 94515 motorcycles, ATVs, quads, etc. Gives lacquers, plastics and rubber a light shine. Drum code: SD 500

ClEAN & WAX SPRAY Special waterless cleaning and wax preservative foam. 94520 Preserves with a layer of wax after cleaning. Drum code: SD 500

HElMET ClEANER SPRAY Cleaning and protective foam for helmet shells and interior94525 cushions. Gives a pleasant fragrance. Freshens up colours. Drum code: SD 200

OFF ROAD CHAINlUBE Fully synthetic chain lubricant specially for dirty off-roaders and SPRAY mopeds, ATVs, quads, etc.94605 Reduces wear. Does not corrode o-rings or x-rings. Drum code: SD 500

RACE CHAINlUBE SPRAY Fully synthetic, white, PTFE chain lubricant for dirty off-roaders, etc.94610 Extremely effective for reducing wear. Does not corrode o-rings or x-rings. Drum code: SD 500

CHAIN ClEANER SPRAY Very efficient cleaning agent for drive chains.94615 Cleans chains prior to lubrication with OFF ROAD CHAINLUBE SPRAY or RACE CHAINLUBE SPRAY Drum code: SD 500

AIR FIlTER OIl SPRAY Air filter oil for foam and cotton filter elements.94620 Effectively reduces intruding sand, dust and water. Also available in liquid form: 94605 Drum code: SD 500

Clean and care for motorcycles

PANOLIN AGHigh Tech SchmierstoffeCH-8322 Madetswil Telefon +41 (0)44 956 65 65Telefax +41 (0)44 956 65 [email protected] 20

0 21

0.e

/ 20

0802

19 —

© b

y PA

NO

LIN A

G /

NW

&F

Alte

ratio

ns re

serv

ed.

Product list 08/09 - WinStar.com.pk · Product and For detailed information on product ......

Documents

Transcript of Product list 08/09 - WinStar.com.pk · Product and For detailed information on product ......