Product line: sliding doors, swing door drives, … · AUTOMATIC ENTRANCE SYSTEMS Product line:...

AUTOMATIC ENTRANCE SYSTEMS

Product line: sliding doors, swing door drives,

revolving doors, glass sliding doors

2

Product line for modern architecture

Automatic entrance systems

2

3

Glass sliding doors

With manual or automatically

driven all-glass systems, you

achieve both transparency and

separation.

Revolving doors /

Single-person access

Presentable, draught-free

entrance areas are made with

revolving doors, depending on

the system. Security revolving

doors and security curved

sliding doors are used in areas

where a high degree of security

is required.

Swing door drives

Our swing door drives auto-

mate exterior, interior, smoke,

and fi re doors. Barrier-free

access can thus be provided

anywhere.

Sliding doors

Automatic sliding doors are

used most frequently in auto-

mation of building entrances.

People entering the building

appreciate the fast opening

and enabling of the entrance

area and consider it convenient

when they enter the building.

State-of-the-art technology – user-friendly, high-performance and safe.

Table of contents

Sliding doors ....................................................................page 04

Swing door drives ............................................................page 20

Revolving doors ............................................................. page 24

Single-person access .....................................................page 30

Glass sliding doors ..........................................................page 34

GU service ........................................................................page 38

Gretsch-Unitas Group

With its future-oriented

innovations, the Gretsch-

Unitas Group has long been

shaping the market and setting

groundbreaking standards.

Convenience and security are

given the highest priority when

opening and closing doors.

Quality for more

than 100 years

For more than a century, the

Group has off ered complete

solutions that focus not just

on the individual product

but, above all, on the overall

system. For the automatic

entrance systems, the mature

mechanical components

supplement the intelligent

electronics components

ideally.

More than just products:

planning, implementation,

service

We support you in all phases

in achieving your individual

entrance solutions. Short

decision paths and fast, re-

liable service allow solutions

that are optimised technically

and economically and perfectly

adapted to your individual,

building-specifi c requirements.

System solutions

as a whole

The wide-ranging assort-

ment of the most up-to-date

mechanical products with the

highest quality meet the re-

quirements of the market. Our

focus, however, is not just on

individual products, but on the

design of complete solutions

that meet the most up-to-date

requirements.

4

The slim sliding door with elegant appearance

compactMaster CM / CM-F in-line sliding door

With their compact design and attractive, elegant appearance,

the compactMaster in-line sliding door harmonises especially well

with architecturally sophisticated glass façades and emphasises

their munifi cence and transparency.

With a "real" drive height of only 100 mm, the upper door panel

profi le of the slim profi le system is integrated into the drive and

concealed with a cover.

Slim and technically perfect

Large carriage wheels and a rubber mat under the running track

ensure outstanding running smoothness.

The drives are certifi ed to DIN 18650 and type-tested by TÜV,

thus complying with the current standards and regulations. The

redundant drive system CM-F is suitable for use in escape and

rescue routes (German regulation AutSchR).

5

Cover support

End stop

MotorEmergency-open battery

Carriage

Control unitPower supply unit

Belt connection Belt

Lock (optional)

Pulley

2nd motor *

Running track profile

Rubber profile

Support profile

Cover profile

* Required for drive type CM-F

■ Redundant drive with 2 motors for use in escape

and rescue routes (type CM-F)

■ "Actual" height of drive 100 mm

■ Running smoothness thanks to large carriage wheels

with exchangeable rubber-coated running surface

■ Fast opening speed of up to max. 0.9 m/s

■ Clear and simple operation

■ With locking element integrated into the running carriage

or AMV automatic multi-point locking system as an option

■ Self-learning control system with many connection and

adjustment options

Convincing in detail:

Designation compactMaster CM compactMaster CM-F

Application 1-leaf 2-leaf 1-leaf 2-leaf

Version for escape routes

Clearance width [1] 800 – 2000 mm 800 – 3000 mm 800 – 2000 mm [2] 800 – 3000 mm [2]

Clearance height [1] max. 3000 mm

Height of drive 100 mm

Door leaf weight max. 100 kg / leaf

Supply voltage 230 V AC, 50 Hz

Power consumption max. 160 VA (50 VA during operation)

Hold-open time 0 – 60 s 0 – 99 s

Hold-open time with key impulse 0 – 99 s

Opening speed max. 0.7 m/s max. 0.9 m/s

Closing speed max. 0.5 m/s

Winter opening width [2] 50% – 100% of the clear passage width

Protection class / ambient temperature IP 20 (for dry rooms only) / -15 °C up to +50 °C

[1] Standard dimensions, taking into account the overall measurement, the ratio of height and width and the local installation conditions; special solutions on request. [2] The mandatory escape route width must be observed.

6

Reliable and economical – for almost all applications

econoMaster EM / EM-F in-line sliding door

The tried and tested technology of the econoMaster drive system

with 2 wheels and one counter wheel per carriage guarantees high

cycle numbers and little wear.

With permissible door leaf weights of up to 100 kg, large passage

widths can be achieved with our slim G30 profi le system or with

thermally separated profi le systems with an outstanding price-

performance ratio. Whether your door assembly consists of drive

Reliable and easy to install

and sliding panels only or also includes sidelights or fanlights, GU

Automatic off ers you full service, consisting of installation, com-

missioning, and maintenance.

The drives are certifi ed to DIN 18650 and type-tested by TÜV and

comply with the current guidelines and standards. The EM-F drive

system is tested and suitable for use in emergency and escape

routes (German regulation AutSchR).

7


and rescue routes (type EM-F)

■ Matured and proven mechanics



■ Door locking element in the carriage (option)

■ Easy mounting of running track and drive components


adjustment options


Cover supportMotor Emergency-open

battery Control unit Power supply unitBelt connection

Carriage

Lock (optional) Belt

Pulley

Cover support

2nd motor *


Cover profile

Designation econoMaster EM econoMaster EM-F
















* Required for drive type EM-F

8

The problem-solver for special requirements

heavyMaster HM / HM-F in-line sliding door

The heavyMaster sliding door drive is the problem solver for your

special requirements. Sliding panels with large dimensions or

heavy weights of up to 200 kg are driven reliably and silently.

Even in very high-traffi c entrance areas, the heavyMaster ensures

optimal running characteristics with the least wear, thanks to the

stable carriage and wheels with rubber-coated running surface.

Robust and powerful

Sliding panels made of steel or framed with thermally separated

system profi les can be optimally combined with the heavyMaster.


comply with the current guidelines and standards. The HM-F drive

system is tested and suitable for use in emergency and escape

routes (German regulation AutSchR).

9

■ Redundant drive with 2 motors for use in escape and

rescue routes (type HM-F)

■ Stable carriage with large wheels

■ Running smoothness thanks to carriage wheels with

exchangeable rubber coating


■ Door locking element in the carriage (option)

■ Delicate-appearing G30 profile system for sliding panels

with up to 120 kg door leaf weight


adjustment options


Designation heavyMaster HM heavyMaster HM-F






Door leaf weight max. 200 kg / leaf max. 160 kg / leaf










Cover support

End stop

Motor Emergency-open battery

Carriage

Control unitPower supply unit Belt

Lock (optional)

Belt connection


Rubber profile

Support profile

Cover profile

10

For maximum passage widths in minimum space

econoMaster EMT / EMT-F telescopic sliding door

Telescoping sliding doors are ideally suited to achieving a broad

passageway and optimal people fl ow in narrow spaces.

The continuous fl oor guide helps to stabilise the sliding panels.

Fast opening, large entrances

The drives are certifi ed to DIN 18650 and type-tested by TÜV

and comply with the current guidelines and standards. The EMT-F

drive system is tested and suitable for use in emergency and

escape routes (German regulation AutSchR).

11


and rescue routes (type EMT-F)


■ Running track warp resistance


Designation econoMaster EMT econoMaster EMT-F



Clearance width [1] 900 – 2500 mm 1400 – 3800 mm 900 – 2500 mm [2] 1400 – 3800 mm


Fanlight height max. 800 mm


Door leaf weight max. 100 kg / leaf max. 80 kg / leaf max. 100 kg / leaf max. 80 kg / leaf

Supply voltage 230 V/AC, 50 Hz






Winter opening width [2] 50% - 100% of the clear passage width



Clearance width

Total width

Cle

aran

ce h

eig

ht

To

tal h

eig

ht

Clearance width

Total width

Cle

aran

ce h

eig

ht

To

tal h

eig

ht

Clearance width

Cle

aran

ce h

eig

ht

Tota

l he

igh

t

4-leaf, with sidelights

Design types (representation available in 4-leaf version and in 2-leaf version)

4-leaf, with sidelights and fanlights

4-leaf, only door leaves



■ Integrated door locking element in the carriage

■ Self-learning control system with many connection

and adjustment options

Telescoping sliding doors off er large passage widths

Clearance width

Total width

12

Rounded out – sliding door with a revolving appearance

compactMaster CMR / CMR-F curved sliding door

A curved sliding door combines the generous appearance of a cy-

lindrical door system with the advantages of an easily accessible

sliding door. Whether adapted to the facade in the form of a fl at

curved sliding door, a semicircle, or a full circle up to a diameter of

4000 mm, the compactMaster CMR / CMR-F curved sliding door

always optimally fi ts the architecture of a building.

Absolutely sophisticated as an arch or complete circle

For escape and rescue routes, the CMR-F sliding door version

off ers opening widths up to 2500 mm.


comply with the current guidelines and standards. The CMR-F

drive system is tested and suitable for use in emergency and

escape routes (German regulation AutSchR).

13


and rescue routes (type CMR-F)


and self-aligning bearing-supported carriage wheels




■ Integrated door locking element at the sliding panel


adjustment options

Designation compactMaster CMR compactMaster CMR-F



Clearance width [1] 800 – 1250 mm 1000 – 2500 mm 800 – 1250 mm [2] 1000 – 2500 mm













■ Semicircle

■ Complete circle

360°

■ Arc

■ Radii

of 1000 – 3000 mm

Options:

■ Inclusion in building management systems and

access controls

■ LED spotlights for installation in the bottom of the

aluminium ceiling

■ Glass ceiling

■ Air curtain system

■ Loose-fixed flange connection

■ Entrance matting

14

Entrance doors adapted to the building architecture

compactMaster CMW / CMW-F prismatic sliding door

An exceptional sliding door to give your entrance area an indi-

vidual touch. Every angle between 90° and 179° can be achieved.

Corresponding safety sensors safeguard the main closing edge in

compliance with DIN 18650.

Visual accents for any desired angle

With a "real" drive height of 100 mm, the upper door leaf profi le

of the slim profi le system is completely integrated in the drive

unit and concealed by the hood. The prismatic sliding door can

thus be easily and attractively integrated into all delicate sub-

structures.

15

■ Redundant drive with 2 motors for use

in escape and rescue routes (type CMW-F)

■ Running smoothness thanks to carriage wheels with

exchangeable rubber coating

■ "Actual" height of drive 100 mm




■ Integrated door locking element in the carriage


adjustment options

Designation compactMaster CMW compactMaster CMW-F

Application 2-leaf 2-leaf


Clearance width [1] 900 – 2000 mm 900 – 2000 mm [2]












[1] Standard dimensions, taking into account the overall measurement, the ratio of height and width and the local installation conditions; special solutions on request.[2] The mandatory escape route width must be observed.

Drive claddingDriv

e cladding

90° – 179°

5050

32,532,5

Clearance width

16

Combi-switchSummer/winter/APO / FWS

■ Summer / winter switch (reduced

opening width)

■ "Pharmacy" function

■ For setting the programme types: off/

locked, exit, automatic, permanently

open

■ White frame (standard)Fig.: stainless steel frame

Versions / order numbers

Installation variants Order numbers

Flush-mounted A-8002380

Surface-mounted A-8002420

Accessories – order information

Sliding doors





Programme selection switch (FWS)



open

■ Key removable in every programme

type

■ White frame (standard)

Fig.: stainless steel frame

Summer/winter/APO

■ Summer / winter switch (reduced

opening width)

■ "Pharmacy" function







Programme selection switch PO6



open, exit winter, automatic winter

■ Key removable in every programme

type

■ For customer-provided PHZ 27 mm





17

Display programme switch (DPS)

■ For setting and display of the pro-

gramme types: off/locked, exit, auto-

matic, permanently open

■ Error display, service

■ In combination with a key pushbutton,

suitable for use in escape-route sliding

doors (authorised personnel)







Designation Order numbers

Safety-button light

barrierA-7130810

Evaluation unit A-7130820

Safety-button light barrier

■ To secure the open passageway in the

heights of 200 and 1000 mm

■ Note: According to DIN 18650-2, not

suitable for people needing special

protection



Rain hood Active 8 A-7133410

Rain hood Active 8

■ To minimise control errors when it rains

Radar motion detector with safe-guard curtain (DIN 18650)

Active 8 ONE ON ■ Direction detection

■ Testable presence curtain, 2-rows

Active 8 THREE ON ■ Direction detection and self-monito-

ring

■ Testable presence curtain, 2-rows



Impulse transmitter

Active 8 ONE ONA-7125440

Impulse transmitter

Active 8 THREE ONA-7125450

■ For use in sliding doors, escape and

rescue routes (inside, in the escape

direction)

18

Accessories – order information

Sliding doors

Elbow switch

■ Large-surface pushbutton in surface-

mounted design

■ Including decal "Press here"



Elbow switch A-8001940

Elbow switch in stainless steel design

A-8003560

Decal "Press here" A-7025010

Magic Switch impulse transmitter

■ For touch-free control of automatic

doors

■ Activation through hand movement,

direction-sensitive

■ Distance: 20 – 50 cm



Impulse transmitter

Magic Switch A-7032820

Radar motion detector

Eagle ONE ■ Direction detection

Eagle THREE N ■ Direction detection and self-monito-

ring

■ For use in sliding doors, escape and

rescue routes (inside, in the escape

direction)



Radar Eagle ONE A-7023370

Radar Eagle THREE N A-7117420

Rain hood Eagle

■ To minimise control errors when it rains



Rain hood Eagle A-7023630

19

Key switch

■ For customer-provided PHZ 27 mm

■ Grey frame (standard)





EMERGENCY STOP

■ Stops the system when actuated

■ Deactivate by turning







Code keyboard

■ For control of doors by means of a

numerical code

■ Dimensions: 80 x 80 x 12 mm

Evaluation unit

■ For use inside

■ Dimensions: 110 x 180 x 40 mm



Code keyboard A-7109120

Evaluation unit A-7109130

Mechanical fl oor lock

■ For mounting on sliding door panels

■ It can also be locked on both sides with

appropriate processing of the G30 slim

profile system (customer-provided

profile cylinder)



Mechanical

fl oor lockA-8004110

20

Barrier freedom and comfort even for noise-sensitive areas

turnMaster swing door drive

Even large and heavy doors can be opened in a controlled way

and without eff ort by the user. The turnMaster electromechanical

swing door drive is also especially quiet, which makes it suitable

for use in areas which are particularly sensitive to noise.

A variety of functions for maximum convenience

The turnMaster is available for one-leaf doors in both push-open

or pull-open versions. The operation modes – fully automatic,

servo drive und low-energy operation – are integrated into one

device and can be selected when mounting.

21

■ Outstandingly quiet, electromechanical swing door drive

■ Built-in function selector switch with LED indication

■ Type-tested by TÜV and certified to DIN 18650

■ Adjustable wind pressure function

■ Slot for radio receiver card


■ Motor lock, SECURY A-opener, electric door opener and

safety sensors can be connected directly

■ Easy, time-saving installation, commissioning and mainte-

nance


adjustment options

Designation turnMaster

Version Push-open Pull-open

Opening electromechanical

Key bitting spring force

Closing force (according to EN 1154) size 3 – 6 size 3 – 5

In case of power failure door closer function

Opening angle 130° 98°

Opening speed adjustable

Hold-open time adjustable


Power consumption 200 VA

Door leaf weight max. 250 kg

Door leaf widths 700 – 1400 mm 700 – 1250 mm


Dimensions (W x H x D) 700 x 104 x 135 mm

Power supply for external accessories 24 V DC, 1.2 A

Operation modes:

■ Automatic operation

■ Servo operation

■ Low-energy operation

135

Sensor Sensor

10

4

Accessories:

■ Push-open linkage up to max. 250 mm

soffit depth

■ Pull-open slide arm from -10 to +33 mm

soffit depth

■ Sensor strips

■ Axle extension 12 or 48 mm

■ Door stop

22

High-performance on standard and fi re protection doors

swingMaster swing door drive

The electro-hydraulic swingMaster DTH swing door drive is suit-

able for use on outside doors in façades and on inside doors made

of wood, aluminium or steel – also for later automation. Two-leaf

doors with stops can be safely opened and closed again in the

correct sequence through the integrated door leaf coordinator.

Safely barrier free

In the swingMaster DTB version, the swing door drive has a

permit for use on fi re protection doors. Fire protection doors with

a leaf width of up to 1400 mm are opened automatically and in

case of fi re safely closed again by means of the integrated spring.

Passage widths of 2800 mm can thus be achieved with two-leaf

stop doors.

23

■ Robust electro-hydraulic swing-door drive

■ Push & go function can be activated

■ Easy, time-saving installation and commissioning


■ Steplessly adjustable closing force

■ Many connection and adjustment options, e.g. with smoke

and heat exhaust supply air

■ Combinable with GU-SECURY Automatic multi-point locking

with A-opener

Designation swingMaster DTH swingMaster DTB


For use on fi re and smoke protection doors

Push-open version

Pull-open version

Opening electro-hydraulic

Key bitting spring force

Closing force (according to EN 1154) size 3 – 6

Opening angle 115°

Opening speed adjustable

Hold-open time adjustable


Power consumption 300 VA

Door leaf weight max. 250 kg

Door leaf widths 690 – 1400 mm


Dimensions (W x H x D) 690 x 104 x 134 mm

Power supply for external accessories 24 V DC, 1.2 A

max 300

max

. 32

134

10

4

30 mm axle extension

Door leaf weight (kg)

Do

or

leaf

wid

th (

mm

)

1400

1300

1200

1100

1000

10

0

11

5

13

0

14

5

16

0

25

0

24

Individual solutions are standard

GRA standard revolving door

With standard revolving doors, building entrances can be

designed functionally and protected against draught and noise.

The variable design and multitude of options allow for individual

solutions varying in function, appearance and size. Depending on

usage requirements, the standard revolving door can be

operated manually, semi-automatically with push & go function,

or automatically with radar activation sensors. The drum walls

Eff ective protection against draughts, cold and dirt

may be designed with glass but also with heat-insulated panels of

sheet metal. Regardless of which options you choose, user safety

is always the top priority. The semi-automatic or fully automatic

revolving door is certifi ed to DIN 18650 and type-tested by TÜV

and complies with the current standards and regulations.

25

■ Individual solutions through variable design with a multitude

of options

■ Turnstile of slim-profile aluminium-glass construction

■ Drum walls made of curved 10 mm laminated sheet glass

(LSG) or heat-insulated sheet-metal panels


■ Minimum crown height 175 mm

■ Electromechanical locking at the turnstile (only for the auto-

matic version) or with mechanical shoot bolt locks


GRA standard revolving door

D* A* B* C / 3-leaf C / 4-leaf E

1800 2100 – 3000 175 – 800 ~ 830 ~ 1220 1860

2000 2100 – 3000 175 – 800 ~ 920 ~ 1350 2060

2200 2100 – 3000 175 – 800 ~ 1010 ~ 1490 2260

2400 2100 – 3000 175 – 800 ~ 1105 ~ 1620 2460

2600 2100 – 3000 175 – 800 ~ 1195 ~ 1760 2660

2800 2100 – 3000 175 – 800 ~ 1285 ~ 1890 2860

3000 2100 – 3000 175 – 800 ~ 1375 ~ 2030 3060

3200 2100 – 3000 175 – 800 ~ 1465 ~ 2160 3260

3400 2100 – 3000 175 – 800 ~ 1555 ~ 2290 3460

3600 2100 – 3000 175 – 800 ~ 1645 ~ 2430 3660

3800 2100 – 3000 175 – 800 ~ 1690 ~ 2490 3860

* Special dimensions available on request

BA

C

E

Ø = D

C

E

Ø = D

Options:

■ Folding mechanism for summer position

■ Manual or automatic night locking

■ Air curtain systems in different versions

■ LED lamps in the ceiling

■ Stainless steel bottom ring

26

Perfect integration of the entrance area into glass façades

GGG all-glass revolving door

All-glass revolving doors are not just functional, but exceedingly

presentable. The minimum profi le sizes permit maximum trans-

parency, even with automatic all-glass revolving doors, since the

drive is located in the fl oor.

Sophisticated and inviting

Customer-specifi c adaptations and desires, such as swing-out

leaves for summer opening or an automatic night lock feature, can

always be included and implemented quickly. The semi-automatic

and automatic revolving door are certifi ed to DIN 18650 and

type-tested by TÜV and comply with the current standards and

regulations.

27

■ Maximum portion of glass

■ Turnstile of slim-profile aluminium-glass construction

■ In manual, semi-automatic and fully automatic versions


■ Manual and automatic night lock feature

■ Electromechanical locking at the turnstile (only for the auto-

matic version) or with mechanical shoot bolt locks


GGG all-glass revolving door

D* A* B** C / 3-leaf C / 4-leaf E

1800 2100 – 3000 16 ~ 830 ~ 1220 1860

2000 2100 – 3000 16 ~ 920 ~ 1350 2060

2200 2100 – 3000 16 ~ 1010 ~ 1490 2260

2400 2100 – 3000 16 ~ 1105 ~ 1620 2460

2600 2100 – 3000 18 ~ 1195 ~ 1760 2660

2800 2100 – 3000 18 ~ 1285 ~ 1890 2860

3000 2100 – 3000 18 ~ 1375 ~ 2030 3060

* Special dimensions available on request ** Or according to structural requirements

BA

C

E

Ø = D

C

E

Ø = D

Options:

■ Manual or automatic night locking

■ Horizontal or vertical door handles for manual operation

■ Folding mechanism for summer position


■ Floor pan

■ Air curtain system, vertical

28

Comfortable entry, even with heavy foot traffi c

GGR large-capacity revolving door

For large visitor fl ows and use in escape and rescue routes, the

large-capacity revolving door is the elegant and energy-saving

entrance solution. This door combines modern design with high

functionality in an ideal way. For example, comfortable passage

with shopping carts and prams or wheelchairs is always possible.

Suitable for escape and rescue routes

The leaves are divided in two and held securely with magnetic

clamps in normal operation. In the event of a fi re or a power

failure, or if the emergency button has been pushed, the panel

fi xation is released so the sliding panels can be folded away at the

centre pillar in the direction of escape. The fully automatic revol-

ving door is secured with sensors and contact strips according to

the current standard DIN 18650 and type-tested by TÜV.

29

■ Ideal for heavy visitor traffic

■ Offers plenty of space for shopping carts, prams, wheelchairs

■ Suitable for use in escape and rescue routes due to foldable

panels, which are securely fixed in normal operation


■ Different materials and finishes for individual solutions

■ Manual or automatic night lock feature

■ Locked with shoot bolt locks on the door panels or with night

lock

GGR large-capacity revolving door


3600 2100 – 2500 500 – 800 ~ 1630 ~ 2408 3720

4800 2100 – 2500 500 – 800 ~ 2230 ~ 3257 4920

5400 2100 – 2500 500 – 800 ~ 2530 ~ 3681 5520

6000 2100 – 2500 500 – 800 ~ 2830 ~ 4105 6120

* Special dimensions on request in intermediate steps up to diameter 6200 mm

BA

C

E

C

E

Ø = D Ø = D

Options:



■ Roof outdoors waterproof

■ LED lamps in the ceiling


■ Floor pan

■ Air curtain systems in different versions

30

Secure access control and fast passage

GSI security revolving door

Access to safety-sensitive buildings or areas within a building

can be controlled through security revolving doors. Besides

functionality, the building architecture is taken into conside-

ration according to the customer's wishes, so a tailor-made

solution always results.

Access controlled in both directions

In the initial position, the security revolving door is by means of a

motor-driven brake system. An access control system releases it.

Unauthorised persons are conducted out of the drum in the exit

direction.

31

■ Access control even with heavy people traffic

■ Access control in both directions

■ Draught-free and always noise-protected access control

■ Manual or automatic night lock feature


■ Electro-motorised locking at the turnstile and / or by means of

mechanical shoot bolt locks

■ Problem-free adaptation to on-site access control systems

■ Different materials and finishes for individual solutions

GSI security revolving door


1800 2100 – 3000 350 – 800 ~ 859 ~ 1239 1860

1900 2100 – 3000 350 – 800 ~ 907 ~ 1308 1960

2000 2100 – 3000 350 – 800 ~ 954 ~ 1377 2060

2100 2100 – 3000 350 – 800 ~ 1002 ~ 1446 2160

2200 2100 – 3000 350 – 800 ~ 1050 ~ 1514 2260


BA

C

E

C

E

Ø = D Ø = D

Options:



■ Safety glass

■ LED spotlights for installation in the aluminium ceiling

■ Roof outdoors waterproof

■ Bottom ring with floor pan

32

Single-person access control and transparency

GSI security curved sliding door

With a minimum diameter of one metre, access control can be

carried out in the smallest space. Transparency is maintained due

to the high glass portion. A 2-zone contact mat is used to monitor

the entrance area for authorised and unauthorised users. In the

initial position, the door leaves are electromechanically locked.

If an access control system authorises entry, the door opens

automatically.

Access control in the narrowest space

As soon as the user enters the sluice and steps on the contact

mat, the door will close again. As soon as the door is closed, the

opposite door is automatically opened. The sluice can then be

departed again. If the sluice is entered without authorisation, the

ongoing sluice process is interrupted. The corresponding door

remains open until the sluice area is empty again.

33

■ Access control in the narrowest space, from a diameter of 1 m

■ Sense of spaciousness and transparency due to the large glass

portion


■ Single-person access control and sluice area monitoring by

means of 2-zone contact floor mat

■ Problem-free adaptation to on-site access control systems

GSI security curved sliding door

D* A* B* C E

1000 2100 – 3000 350 – 800 ~ 500 1060

1300 2100 – 3000 350 – 800 ~ 600 1360

1500 2100 – 3000 350 – 800 ~ 700 1560


Options:

■ Sliding panels and drum walls made of curved 10 mm

laminated sheet glass (LSG)

■ LED spotlights for installation in the aluminium ceiling

BA

C

E

Ø = D

■ Available in different finishes and colours

34

The modular all glass sliding partition

shopMaster GSW-M all-glass system

The all-glass sliding partition system shopMaster GSW-M allows

creation of partition walls and shop-fronts for shop-in-shop con-

cepts in a multitude of individual designs. There are virtually no

limits placed on the planner's creativity, since solutions can be

implemented for practically any fl oor plan. According to require-

ments, the all-glass sliding partitions are available in linear, curved

or segmented designs. The units can be arranged fl exibly; a

fl oor guide is not needed. The system's compact design requires

Flexible and transparent

only minimal space for running track and parking niche. The use

of Swing&Slide panels equipped with a door closer is just one

way of providing variable passages. The running mechanisms

are equipped with high-quality ball-bearing-supported carriage

wheels and ensure permanently reliable operation and smooth

motion of the elements during opening and closing. In case of

glass breakage, the clamping profi les are protected from falling by

special fi ttings.

35

■ Modular design with prefabricated function elements

■ Can be combined with BKS electro-clutch locks

■ No continuous floor guide required


■ Ball bearing supported and plastic-coated high-quality runners

■ Two-part running track allows flexible creation of curves

■ Locking elements for segmented systems

Designation shopMaster GSW-M

Max. element height 3500 mm*

Max. element width 1250 mm*

Max. element weight 150 kg

Possible glass thicknesses 10 / 12 mm

Running track version linear / angled / segmented / curved from a radius of 6000 mm

Finishes

silver colour E6 / EV1 anodized

RAL colour as desired (powder coating)

stainless steel appearance

* Special solutions on request

Carriage

End cap

Face fi xed locking

bolt (optional, depending

on panel type)

Extension profi le

(optional)

Running track,

2-part

Base profi le

Clamping

profi le

Closing

profi le

End cap

Glass

(toughened,

10/12 mm)

Glass

(toughened,

10/12 mm)

36

Comfort and safety with automatically driven elements

shopMaster GSW-A all-glass system

The automatic all-glass sliding partition system shopMaster

GSW-A off ers a wide variety of design options for architects and

planners, such as partition walls and façade concepts, as well

as maximum convenience for operators or users. The system's

compact design requires only minimal space for running track and

parking niche. The running modules are equipped with state-

of-the-art carriages with plastic-coated, ball-bearing supported

rollers.

Exclusive and convenient

These guarantee reliable functioning and noiseless movement of

the elements throughout their service lives. Thanks to the small

running track height of 86.5 mm, installation fl ush with the ceiling

is possible almost everywhere. The required fl oor guide provides

additional stability and utmost convenience to the user. For safety

reasons, the automatic all-glass sliding wall can be moved by hand

in the event of a power failure.

37

Functional features:

■ Obstacle recognition

■ Maximum impact force 150 N

■ Automatic locking

■ Small installation height

■ Distance between moving panels adjustable: 50 – 1500 mm

■ Ball bearing supported and plastic-coated high-quality runners


■ Continuous floor guide

■ Panels movable by hand in the event of a power failure

■ Optionally with fully automatic wall cover for parked panels

Designation shopMaster GSW-A

Max. element height 3500 mm*

Max. element width 1250 mm*

Max. element weight 150 kg

Max. number of elements 32

Possible glass thicknesses 10 / 12 mm

Nominal voltage 230 V AC, 50 Hz

Nominal power 230 W

Operating current 24 V DC

Ambient temperature -15 °C to +50 °C

Protection class IP 20

Speed adjustable from 50 – 150 mm/s

Running track version linear / angled / curved from a radius of 6000 mm*

Finishes

silver colour E6 / EV1 anodized

RAL colour as desired (powder coating)

stainless steel, matt polished**

* Special solutions on request ** Module cladding anodized similar to stainless steel

Sliding panel

with drive module and current collecting module, each positioned

above the base profi le; fl oor guidance is provided by the roller pin

running in the fl oor rail.

Turn-only end panel

opens and closes automatically as the sliding wall system is

released or locked, respectively.

■ Decelerated speed into the end positions

■ Emergency release via profile cylinder

38

The GU pledge

Through a type test, the TÜV confi rms that the requirements

from the relevant standards and directives are met.

But it does not take into account the hazards resulting from local

conditions or the specifi c building use.

And so before installation and commissioning of the system, a

hazard analysis that takes the local conditions into account must

be performed.

Ideally, the safety concept will be coordinated with the customer

or operator in the planning phase.

The Gretsch-Unitas Group off ers:

■ individual advice

■ qualified project handling

■ correct installation

■ reliable service

This ensures that commissioning takes place without unpleasant

surprises. All required safety components are taken into account

and need only be tested for proper functioning at commissioning.

Tested safety

Safety: successfully certifi ed

DIN 18650: Safety requirements for automatic door systems

DIN 18650 regulates safety for automatic door systems in

Germany, Austria and Switzerland.

Besides product and safety requirements, it describes the

acceptance inspection at the installation location, maintenance

and regular checks.

More than 100 years of experience

Worldwide presence

System solutions in the project

Advice right from the planning stage TÜV type-tested Safety through quality manufacturing

39

The Gretsch-Unitas Group – your modern partner

The GU service

Regular, professional maintenance is the best guarantee of main-

taining the value and functional safety of automatic doors over

the years.

In Germany, GU Service GmbH on behalf of GU Automatic GmbH

installs automatic sliding doors, swing door drives, revolving

doors, all-glass sliding walls and security doors.

After-sale service directly from the manufacturer with its own

personnel, optimal product knowledge and use of original

replacement parts ensures the greatest functional availability of

automatic door systems. Short travel times are ensured due to a

comprehensive network of service installers.

An automatic door system must also be tested at least once per

year by an expert. Besides this safety check, maintenance ac-

cording to the manufacturer's specifi cations must be performed.

Ideally, this takes place at the same appointment.

Safety check and maintenance

A service contract for automatic door systems off ers many advan-

tages:

■ Early recognition of wear ensures operational and personal

safety

■ Unplanned service work is markedly reduced

■ Regular inspection of safety components minimizes the

operator's potential liability risk

■ Provision and updating of a system-specific inspection book

■ Possible hazards resulting from a change in use are recognized

and can be eliminated

■ Service customers receive discounts on parts prices and pay

fixed travel fees

Special solutions development

Products in stock around the globe

Modular system technology

Correct installation Service and maintenanceLogistics – just-in-time wherever you are

The service contract

GU Automatic GmbH

Stahlstr. 8

D-33378 Rheda-Wiedenbrück

Tel. + 49 (0) 5242 924-0

Fax + 49 (0) 5242 924-100

WP

00

45

0-0

4-4

-2

07/

11

P

rin

ted

in G

erm

any

www.g-u.com

BKS GmbH

Heidestr. 71

D-42549 Velbert

Tel. + 49 (0) 2051 201-0

Fax + 49 (0) 2051 201-9733

Gretsch-Unitas GmbH

Baubeschläge

Johann-Maus-Str. 3

D-71254 Ditzingen

Tel. + 49 (0) 7156 301-0

Fax + 49 (0) 7156 301-77980

sue

Typewritten text

Automatic Doors Ltd 15 The Waterways Stratford-upon-Avon Warwickshire CV37 0AW Tel: 01789 414635 www.automaticdoors.ltd.uk e-mail: [email protected]

Product line: sliding doors, swing door drives, … · AUTOMATIC ENTRANCE SYSTEMS Product line:...

Documents

Transcript of Product line: sliding doors, swing door drives, … · AUTOMATIC ENTRANCE SYSTEMS Product line:...