PRODUCT INFORMATION MLT-L Series with Air Cooled Condenser · PDF fileMLT-L Series with Air...
Transcript of PRODUCT INFORMATION MLT-L Series with Air Cooled Condenser · PDF fileMLT-L Series with Air...
MLT-L Series with
Air Cooled Condenser
Product Description
The MLT800L desiccant dehumidifier with air cooled condenser isdesigned to efficiently dehumidify in unheated closed spaces usingminimal energy. The wet air from the dehumidifier is passedthrough the air cooled condenser and then returned to the rotor ina closed loop circuit. The components within the closed loop areconstructed of stainless steel and thermoset plastic. Water removedby the condenser is drained away. The heat from the air cooledcondenser is then either used in the application or ducted away.Its rugged formed metal frame and access panels are produced fromcorrosion resistant Aluzink®. The electrical system conforms toestablished ML Series standards as well as to both harmonisedEuropean Standards and to CE marking specifications.
Munters Rotor Technology
The desiccant rotor is manufactured from a corrugated compositematerial that is highly effective at attracting and holding watervapour. Every Munters dehumidifier applies a unique rotortechnology. Airflows, air conditions, rotor sections, and rotorrotation speeds are optimised for specific applications. Aninnovative control system maximises the units energy efficiency.A characteristic of the MLT-L Series rotor technology is an extrarotor sector which provides high capacity, while simultaneouslyrecovering heat, thereby effectively reducing the electrical powerrequirement. The reactivation air is continually re-circulated.
PRODUCT INFORMATION
MLT800L
Features
- Advanced control panel -diagnostic fault display.
- Minimal energy consumption.
- Heat recovery – condenser heatavailable.
- Easy to install – no wet air ductneeded.
- High airflow capacity.
Model MLT800LDiagram measurements are for referenceonly.
Scaled and dimensioned AutoCaddrawings are available in MuntersDryCap program.
D
E
B
A
C
Width (A) 1500 mm
Depth (B) 590 mm
Height (C) 1305 mm
Diam. (D) 160 mm
Diam. (E) 250 mm
Weight 214 kg
Technical Specification
Process AirRated airflow (m³/h) 800Available static pressure (Pa) 200
Reactivation airRated airflow (m³/h) 155
Condenser airRated airflow (m³/h) 1250Available static pressure (Pa) 200Fan motor power (kW) 1,1Sensible heat, condenser air (kW) 3,2
Total power,voltage and current (amps/phase)Total power(kW) 6,67220V 3-50Hz (A) 20,5230V 3-50Hz (A) 20,5380V 3-50Hz (A) 11,9400V 3-50Hz (A) 11,7415V 3-50Hz (A) 11,6
+0/+2574
G3IP33
Miscellaneous DataOperating temperature (ºC)Sound power level to room Lw(A)dB, all inlets and outlets ducted Air filter standardIEC protective class (unit)IEC protective class (electrical panel) IP54
DehumidificationCapacity
Approximate capacity in kg/h atdifferent inlet process air relativehumidity, % RH.
Dehumidification capacity, kg/h
0
0,7
1,4
2,1
2,8
3,5
–10 0 10 20 30
60% RH80% RH
40% RH
Process Air Temperature, °C
Options
• Hours run counter (monitors thenumber of hours the system isoperational)
• Blocked filter alarm• Rotor stopped alarm• Humidity control system with alarm
and displayRefer to the RH98 product datasheet
• Stainless steel sheet metal casing
DH/MEA/PGB-0049-11/02
Sub
ject
to c
hang
e w
ithou
t not
ice.
AUSTRALIATel +61 2 8843 1588
AUSTRIATel +43 1 6164298-0
BELGIUMTel +32 2 240 68 68
BRAZILTel +55 41 3317 5050
CANADATel +1 905 8585894
CHINATel +86 10 804 18000
DENMARKTel +45 4495 3355
FINLANDTel +358 20 776 8230
FRANCETel +33 1 3411 5757
GERMANYTel +49 40-879690-0
INDIATel +91 20 668 18 900
ITALYTel +39 0183 521377
JAPANTel +81 3 5970 0021
KOREATel +82 2 761 8701
MEXICOTel +1 52 722 270-4029
NETHERLANDSTel +31 172 43 32 31
POLANDTel +48 58 305 35 17
SINGAPORETel +65 6744 6828
SOUTH AFRICATel +27 11 997 2000
SPAINTel +34 91 640 09 02
SWEDENTel +46 8-626 6300
SWITZERLANDTel +41 52 3438886
THAILANDTel +66 2 642 2670-3
TURKEYTel +90 262 751 3750
UNIT. ARAB EMIRATESTel +971 4 8809295
UNITED KINGDOMTel +44 1480 432 243
UNITED STATESTel +1 978 241 1100
VIETNAMTel +84 8 825 6838 www.munters.com