Product Information: Flat belt P2/ P3 · Belt material: PU 92 ShA Tension member: S / Z twisting HP...
1
Product Information: Flat belt P2/ P3 Areas of Application Lifting drives / scissors lift Heavy duty applications Technical Data Available thicknesses: 2 / 3 mm Standard widths: 50 / 60 / 75 / 100 mm Tensile loads up to 3 t (32,000 N) Tear loads up to 12 t (120,000 N) Belt material: PU 92 ShA Tension member: S / Z twisting HP “high power” braids on request Fabric on request Roll length 50 / 100 meters Not suitable for crowned sprockets General Information Low-noise belt running due to profiling running side Thickness tolerances + / - 0.05 mm for uniform roll up sections High positioning accuracy with low elongation Temperature range -25 to +85°C, briefly up to 110°C Good resistance to oils, lubricants and ozone Silicone-free and paint-compatible versions possible Extensive stock program, good availability All information can be found in the catalog “Polyurethane Yard Goods” from page 84 onwards. Download catalog Permitted tensile load (N) Tear load (N) Elongation mm / m at the permitted tensile load Dimensions (mm) Hallo Hallo M6 screws for P2 HP, M8 screws for P3 belts. Further belt types and dimensions on request. Please ask for the number of screws in our application engineering department. Tensile- / Tear load (N) Dimensioning of clamping plates (mm) Recommended clamping plates width B (mm) Your specialist for synchronous belt technology Technical Datasheet
Transcript of Product Information: Flat belt P2/ P3 · Belt material: PU 92 ShA Tension member: S / Z twisting HP...
Product Information: Flat belt P2/ P3
Areas of Application
Lifting drives / scissors lift
Heavy duty applications
Technical Data
Available thicknesses: 2 / 3 mm
Standard widths: 50 / 60 / 75 / 100 mm
Tensile loads up to 3 t (32,000 N)
Tear loads up to 12 t (120,000 N)
Belt material: PU 92 ShA
Tension member: S / Z twisting
HP “high power” braids on request
Fabric on request
Roll length 50 / 100 meters
Not suitable for crowned sprockets
General Information
Low-noise belt running due to profiling running side
Thickness tolerances + / - 0.05 mm for uniform
roll up sections
High positioning accuracy with low elongation
Temperature range -25 to +85°C, briefly up to 110°C
Good resistance to oils, lubricants and ozone
Silicone-free and paint-compatible versions possible
Extensive stock program, good availability
All information can be found in the catalog
“Polyurethane Yard Goods” from page 84 onwards.
Download catalog
Permitted tensile load (N)
Tear load (N)
Elongation mm / m at the permitted tensile load
Dimensions (mm)
Hallo
Hallo
M6 screws for P2 HP, M8 screws for P3 belts.
Further belt types and dimensions on request.
Please ask for the number of screws in our applicationengineering department.
Tensile- / Tear load (N)
Dimensioning of clamping plates (mm)
Recommended clamping plates width B (mm)
Your specialist forsynchronous belt technologyTechnical Datasheet
