Product information

Drummotors

TM 315-50

w w w . v a n d e r g r a a f p t e . n l

Van der GraafPower Transmission Equipment

2

This catalogue contains standard designs of the TM 315-50. This drummotor can be provided in steel or (partly) stainless steel (304 or 316). Stainless steel executions have different dimensions then steel executions.

For different lengths or executions please contact us or your local distributor.

We reserve the right to change technical specifications.

Van der Graaf B.V.De Weijert 148325 EM VollenhoveThe Netherlands

P.O. box 38325 ZG VollenhoveThe Netherlands

Tel: +31 (0) 527 241 441Fax: +31 (0) 527 241 488

www.vandergraafpte.nlinfo@vandergraafpte.nl

TM 315-50

Introduction

Address details

© 04/2009 Van der Graaf B.V.

IndexTM 315-50 2

IntroductionAddress details

Product overview TM 315-50 3Dimensions drummotors 4

TM 315A50TM 315B50TM 315A50 CR (RVS)TM 315B50 CR (RVS)

Dimensions taildrums 6KT 315A50KT 315B50KT 315A50 CR (RVS)KT 315B50 CR (RVS)

Cable exit 8Option 1Option 3

Bracket drawings 9AB 50

Contact us 10

| TM 315-50

3

Product overview TM 315-50TYPE

TM 315.50Power

kWBeltspeed m/s at 50 HzBeltpull N

Min. L mmDesign

A

Min. L mmDesign

B

Full load curr.400 V - 50 Hz

I = ... A

Weightkg

L=600

215

11

4,402375

3,802750

3,403075

3,003485

600(650)

650(700) 19,7 140215 Z 2,80

37302,504180

2,404355

2,204750

215 ZV 1,905500

1,606530

4107,5

4,101740

3,402095

3,002375

2,402970

2,203240

1,903750

1,704190

1,504750

600 650 15 140410 ZV 1,40

50901,255700

1,205940

1,106475

475

5,5

4,101275

3,401535

3,001740

2,402175

2,202375

1,902750

1,703075

1,503485

550 600 10,5 135475 Z 1,403730

1,254180

1,204355

1,104750

475 ZV 0,955500

0,806530

455

4,0

4,10925

3,401120

3,001265

2,401585

2,301650

1,902000

1,702235

1,502535

1,402715

1,203165

500 550 7,8 130

1,103455

0,904220

455 Z 0,804750

455 ZV 0,705430

0,655845

0,606335

0,556910

440

3,0

2,301240

1,901500

1,701675

1,501900

1,402035

1,202375

1,102590

0,903165

0,803565

500 550 6,6 130440 Z 0,704070

0,604750

440 ZV 0,555180

0,505700

640 3,0 2,701055

1,601780 500 550 7,1 130

640 ZV 0,456335

0,407125

630

2,2

1,501395

1,201740

1,101900

0,902320

0,802615

0,702985

0,603485

0,504180

500 550 4,9 130630 Z 0,454645

630 ZV 0,405225

0,385500

0,346145

820

1,5

1,101295

0,901585

0,851675

0,652190

0,602375

0,552590

0,453165

0,403565

500 550 4,6 130820 Z 0,373850

0,324455

0,294915

820 ZV 0,255700

12201,5

0,702035

0,354070

550 600 5,8 1351220 ZV 0,24

59400,216785

8151,1

1,10950

0,901160

0,851230

0,651610

0,601740

0,551900

0,452320

0,402615

500 550 3,3 130815 Z 0,37

28250,323265

0,293605

0,254180

1215

1,1

0,701495

0,352985

500 550 5,9 1301215 Z 0,244355

1215 ZV 0,195500

0,166530

Available standard facewidth’s: 500 - 550 - 600 - 650 - 700 - 750 - 800 - 850 - 900 - 950 - 1000 - 1050 - 1100 - 1150 mmOther beltspeeds and facewidth’s upon request.Two speed drummotors upon request.Other powers and frequencies upon request.When a 2-pole drummotor is fitted with a backstop, the minimum facewith is increased by 50 mm.When an electro-mechanical brake is fitted, the minimum facewidth is increased by 100 mm. The total weight of a drummotor grows approx. 7 kg. per 100 mm.Available torque: (Beltpull N x Drumdiameter m)/2 NmWe reserve the right to technical specification changes.

TM 315-50 |

4

Dimensions drummotors

TM 315A50

TM 315B50

TM 315A50, mildsteel drummotor with cast iron junction box

TM 315B50, mildsteel drummotor with cast iron junction box

Width : 95

Width : 95

| TM 315-50

5

TM 315A50 CR (RVS)

TM 315B50 CR (RVS)

TM 315A50 CR, stainless steel drummotor with polyamide junction box and CR sealing

TM 315B50 CR, stainless steel drummotor with polyamide junction box and CR sealing

Width : 95

Width : 95

TM 315-50 |

6

Dimensions taildrums

KT 315A50

KT 315B50

KT 315A50, mildsteel taildrum

KT 315B50, mildsteel taildrum

| TM 315-50

7

KT 315A50 CR (RVS)

KT 315B50 CR (RVS)

KT 315A50 CR, stainless steel taildrum with CR sealing

KT 315B50 CR, stainless steel taildrum with CR sealing

TM 315-50 |

8

Cable exit

Option 1

Option 3Elbow cable exit with cable gland (minimum drumlength increases with at least 50 mm)

Straight cable exit with cable gland

Standard execution of a TM 315-50 is with a cast iron terminal box. For stainless steel execution, this can be either a polyamide or stainless steel terminal box.

On request a drummotor can be fitted with a cable. In this case it is important to know the available voltage (preferably 1 voltage), the length of the cable, wether the cable is shielded or not and the type of cable exit.

An overview of available cable exits is shown below.

| TM 315-50

9

Bracket drawings

AB 50AB 50, kcast iron or steel bracket

TM 315-50 |

Van der GraafPower Transmission Equipment

Netherlands Canada Great BrittainVan der Graaf B.V. Van der Graaf Inc. Van der Graaf U.K. Ltd.

De Weijert 14 2 Van der Graaf Court Unit 23, The Metro Centre

Postbus 3 Brampton Welbeck Way Woodston

8325 ZG Vollenhove Ontario L6T 5R6 Peterborough PE2 7UH

Tel: 00 31 527 241441 Tel: 00 1 905 793 8100 Tel: 00 31 527 241441

Fax: 00 31 527 241488 Fax: 00 1 905 793 8129 Fax: 00 31 527 241488

E-mail: info@vandergraafpte.nl E-mail: info@vandergraaf.com E-mail: sales@vandergraaf.co.uk

www.vandergraafpte.nl www.vandergraaf.com www.vandergraafpte.biz

USA Germany SwedenVan der Graaf Corp. Van der Graaf GmbH Van der Graaf Scandinavia AB

1481 Trae Lane Rheiner Straße 24 B Spinngatan 2

Lithia Springs GA 48432 Rheine-Mesum 260 50 Billesholm

30122 Atlanta Tel: 00 49 5975 306210 Tel: 00 46 42 22 0802

Tel: 00 1 770 819 6573 Fax: 00 49 5975 3062120 Fax: 00 46 42 22 0803

00 1 770 819 6566 E-mail: info@vandergraaf.de E-mail: info@vandergraaf.se

Fax: 00 1 770 819 6675 www.vandergraaf.de www.vandergraaf.se

Contact us