PRODUCT INFORMATION B+P ALUMINUM HAND...
Transcript of PRODUCT INFORMATION B+P ALUMINUM HAND...
PRODUCT INFORMATION
B+P ALUMINUM HAND TRUCKS
2946 Larimer St. Denver, CO 80205 303-295-1100 / 800-373-7693 FAX 303-295-2464 Email [email protected] www.snyderequipment.com
b&p warranty
2 Year Warranty on Liberator Hand Trucks and Liberator Dockboards
Warranty covers failure on genuine B&P Manufacturing Liberator hand truck and Liberator dockboards due to defective material and/or workmanship. The 2 year warranty covers the following Liberator components: dockboards, hand truck frames, frame components, handles, nose plates, nose plate brackets, axles, axle brackets, stair climbers, stair climber components, frame extensions,and any other genuine B&P Manufacturing Liberator Hand truck parts. Liberator parts that are not covered under the 2 year warranty are: tires, inner tubes, wheels, bearings, lift chains, and parts other than genuine B&P Manufacturing Liberator parts. These items carry the standard warranty as follows.
*
Standard Warranty
The seller warrants to the original Purchaser that the items covered by this agreement shall be free from defects in material and workmanship under the normal use and service for a period of one year from the date of shipment of the seller. If within such a period any such product is proved to be so defective, such product shall be repaired or replaced at Seller's option. Sellers obligation is limited to such repair and replacement and is conditioned upon Seller's receiving written notice of any alleged defect within the warranty period and no more than (10) days after its discovery. After written approval by the seller, the product or defective part must be returned to the seller, f.o.b. its factory. The term "Original Purchaser" as used in this warranty shall mean the person or entity to whom such product was shipped by seller or its distributor or seller's agent. This warranty shall not apply to products or parts repaired or altered by other than the Seller or subject to negligence, accident, abuse, misuse or damage. This warranty does not apply to parts subject to wear. With respect to parts not manufactured by Seller, the warranty obligations of Seller shall in all respects conform and be limited to the warranty actually extended to seller by the supplier.
*
http://www.bpmfg.com/warranty.html (1 of 2) [6/22/02 5:42:59 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-handles
Liberator Handles
A1 - Standard Loop 50" Overall
A2 - Standard Loop 50" Overall w/U
brace
A3 - Straight Loop 52" Overall Single
Grip at 46"
A4 - Straight Loop 55" Overall Single
Grip at 46"
A5 - Straight Loop 60" Overall Single
Grip at 46"
A6 - Straight Loop 68" Overall Single
Grip at 46"
http://www.bpmfg.com/lhandles.html (1 of 5) [6/22/02 5:39:34 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-handles
A7 - Straight Loop 52" Overall Vertical Grip at 52"(Use A10
for B4/B5)
A8 - Straight Loop 60" Overall Vertical
Grip at 52" (Use A25 for B4/B5)
A9 - Straight Loop 68" Overall Vertical
Grip at 52"
A10 - Straight Loop For B4/B5 Frame 52" Overall Vertical Grip
at 52"
A11 - Standard Double Grip 48"
Overall Includes U Brace
A12 - Straight Loop 52" Overall Single
Grip
http://www.bpmfg.com/lhandles.html (2 of 5) [6/22/02 5:39:34 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-handles
A13 - Standard Loop w/Comfort Sleeve
50" Overall
A14 - Standard Loop w/Comfort Sleeve and U/Brace 50"
Overall
A15 - Straight Loop 55" Overall Double Grip Loop at 46"
A16 - Straight Loop 60" Overall Double Grip Loop at 46"
A17 - Straight Loop 68" Overall Double Grip Loop at 46"
A18 - 52" Loop Welded Double Grip
http://www.bpmfg.com/lhandles.html (3 of 5) [6/22/02 5:39:34 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-extras
Liberator Frames
B1 - Standard Straight Back
B2 - Lattice Back with 1 Strap
B3 - Lattice Back with 2 Straps
B4 - Curved Back with 1 Strap All Aluminum
B5 - Curved Back All Aluminum Beer/Beverage Use
B6 - Combination Back 1 Curved-2 Straight
http://www.bpmfg.com/liframes.html (1 of 2) [6/22/02 5:42:24 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-extras
B7 - Combination Back 2 Curved-1 Straight
Note item number, such as "B1", then:
RETURN TO BUILD ONE
8052 East Boon Road / Cadillac, MI 49601 231.775.2229 / 800.334.7141 / FAX: 231.775.0013
e-mail: [email protected]
http://www.bpmfg.com/liframes.html (2 of 2) [6/22/02 5:42:24 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-handles
A19 - 60" Loop Welded Double Grip
A20 - 68" Loop Welded Double Grip
A21 - Straight Loop 60" Overall Single
Grip at 52"
A22 - Straight Double Grip 48"
Overall
A23 - 60" Loop Double Grip Curved
Bar at 45"
A24 - 55" Loop Vertical Loop 2 Curved Bars
http://www.bpmfg.com/lhandles.html (4 of 5) [6/22/02 5:39:34 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-handles
A25 - Straight Loop For B4/B5 Frame 60" Overall Vertical Grip
at 52"
Note item number, such as "A1", then:
RETURN TO BUILD ONE
8052 East Boon Road / Cadillac, MI 49601 231.775.2229 / 800.334.7141 / FAX: 231.775.0013
e-mail: [email protected]
http://www.bpmfg.com/lhandles.html (5 of 5) [6/22/02 5:39:34 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-frames
Liberator Convertible Frames
B70 - Jr. Double Grip B71 - Jr. Tilt BackB72 - Jr. Curved Back
Double Grip Swing Arm
B73 - Jr. Curved Back Tilt Back Swing Arm
B80 - Sr. StandardB81 - Sr. High
Capacity
http://www.bpmfg.com/cnvfram.htm (1 of 3) [6/22/02 5:43:12 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-frames
B82 - Sr. Double Grip Swing Arm
B83 - Sr. High Capacity Double Grip Swing Arm
B84 - Sr. Standard Curved Back
B85 - Sr. High Capacity Curved Back
B86 - Sr. Curved Back Double Grip
Swing Arm
B87 - Sr. High Capacity Curved Back
Double Grip Swing Arm
Note item number, such as "B70", then:
RETURN TO BUILD ONE
http://www.bpmfg.com/cnvfram.htm (2 of 3) [6/22/02 5:43:12 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-handles
Liberator Convertible Handles
A1 - Standard Loop A13 - Standard Loop w/Comfort Sleeve A26 - Double Grip
Note item number, such as "A1", then:
RETURN TO BUILD ONE
8052 East Boon Road / Cadillac, MI 49601 231.775.2229 / 800.334.7141 / FAX: 231.775.0013
e-mail: [email protected]
http://www.bpmfg.com/cnvhand.htm [6/22/02 5:39:04 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-noses
Liberator Noses
C1 - Extruded Aluminum 14"x7-1/2" Recessed Heel w/Cutouts
C2 - Extruded Aluminum 18"x7-1/2" Recessed Heel w/Cutouts
C3 - Extruded Aluminum 14"x7-1/2" Rear Mount C4 - Extruded Aluminum 14"x9" Front Mount
C5 - Extruded Aluminum 18"x7-1/2" Rear Mount C6 - Extruded Aluminum 18"x9" Front Mount
http://www.bpmfg.com/libnoses.html (1 of 4) [6/22/02 5:42:41 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-noses
C7 - Extruded Aluminum 14"x10" Recessed Heel w/Cutouts
C8 - Extruded Aluminum 16"x12" Front Mount
C9 - Extruded Aluminum 20"x12" Front Mount C10 - Extruded Aluminum 20"x9" Front Mount
C11 - Extruded Aluminum 14"x9" Front Mount w/Cutouts
C12 - Extruded Aluminum 14"x7-1/2" Front Mount w/Cutouts
http://www.bpmfg.com/libnoses.html (2 of 4) [6/22/02 5:42:41 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-noses
C13 - Extruded Aluminum 18"x7-1/2" Front Mount w/Cutouts
C14 - Extruded Aluminum 18"x12" Front Mount
C15 - Extruded Aluminum 18"x10" Recessed Heel w/Cutouts
C16 - Extruded Aluminum 14"x7-1/2" Front Mount Solid
C17 - Extruded Aluminum 18"x7-1/2" Front Mount Solid
Note item number, such as "C1", then:
RETURN TO BUILD ONE
http://www.bpmfg.com/libnoses.html (3 of 4) [6/22/02 5:42:41 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-wheels
Liberator Wheels
D1/D8 - 8"x2" High Performance D1-BlackD8-Non-Marking Gray
600# Capacity
D2 - 10"x2-1/2" Semi-Pneumatic 1pc. Steel Hub
500# Capacity
D3 - 10"x3-1/2" Pneumatic 1pc. Steel Hub500# Capacity
D5 - 10"x3-1/2" 4-ply Pneumatic 2pc. Steel Hub
600# Capacity
http://www.bpmfg.com/lwheels.html (1 of 3) [6/22/02 5:42:56 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-wheels
D6 - 10"x3-1/2" Care Free® Solid Foam
500# Capacity
D7 - 8"x2-1/2" Semi-pneumatic 1pc. Steel Hub
500# Capacity
D9 - 8"x2-1/2"Pneumatic 1pc.Steel Hub
500# Capacity
D10 - 10"x2-1/8" Balloon Cushion Polyolefin Hub 600#
Capacity
Note item number, such as "D1", then:
http://www.bpmfg.com/lwheels.html (2 of 3) [6/22/02 5:42:56 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-noses
Liberator Convertible Noses
C1 & C19 - 14"x7-1/2" Recessed HeelC1-w/Cutouts, C19-w/o Cutouts
C2 & C20 - 18"x7-1/2" Recessed HeelC2-w/Cutouts, C20-w/o Cutouts
C3 - 14"x7-1/2" Solid Rear Mount C4 - 14"x9" Solid Front Mount
http://www.bpmfg.com/cnvnose.htm (1 of 4) [6/22/02 5:43:13 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-noses
C5 - 18"x7-1/2" Solid Rear Mount C6 - 18"x9" Solid Front Mount
C7 - 14"x10" Recessed Heel w/Cutouts C8 - 16"x12" Solid Front Mount
C9 - 20"x12" Solid Front Mount C10 -20"x9" Solid Front Mount
http://www.bpmfg.com/cnvnose.htm (2 of 4) [6/22/02 5:43:13 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-noses
C11 - 14"x9" Front Mount w/Cutouts C12 - 14"x7-1/2" Front Mount w/Cutouts
C13 - 18"x7-1/2" Front Mount w/Cutouts C14 - 18"x12" Solid Front Mount
C15 - 18"x10" Recessed Heel w/Cutouts C16 - 14"x7-1/2" Solid Front Mount
http://www.bpmfg.com/cnvnose.htm (3 of 4) [6/22/02 5:43:13 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-noses
C17 - 18"x7-1/2" Solid Front Mount
Note item number, such as "C1", then:
RETURN TO BUILD ONE
8052 East Boon Road / Cadillac, MI 49601 231.775.2229 / 800.334.7141 / FAX: 231.775.0013
e-mail: [email protected]
http://www.bpmfg.com/cnvnose.htm (4 of 4) [6/22/02 5:43:13 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-wheels
Liberator Convertible Wheels
D2 - 10"x2-1/2" Semi-Pneumatic 1pc. Steel Hub
500# Capacity
D3 - 10"x3-1/2" Pneumatic 1pc. Steel Hub 500# Capacity
D5 - 10"x3-1/2" 4-ply Pneumatic 2pc. Steel Hub
600# Capacity
D6 - 10"x3-1/2" Care Free® Solid Foam
500# Capacity
http://www.bpmfg.com/cnvwhel.htm (1 of 2) [6/22/02 5:43:14 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-wheels
D10 - 10"x2-1/8" Balloon Cushion Polyolefin Hub600# Capacity
Note item number, such as "D2", then:
RETURN TO BUILD ONE
8052 East Boon Road / Cadillac, MI 49601 231.775.2229 / 800.334.7141 / FAX: 231.775.0013
e-mail: [email protected]
http://www.bpmfg.com/cnvwhel.htm (2 of 2) [6/22/02 5:43:14 PM]
b+p Mfg-Aluminum Hand Truck & Material Handling Equipment-extras
Liberator Extras
E1 - Stair Climber High Strengthw/½"Thick Heavy-Duty Wear Strip With E9
Keg Hook
E45* - Frame Extension45" high
(E52-52",E60-60",E68-68")
http://www.bpmfg.com/liextras.html (1 of 3) [6/22/02 5:40:56 PM]