PRODUCT GUIDE - MHI · product guide. yard. ramps steel . platforms dock . boards dock . plates...
Transcript of PRODUCT GUIDE - MHI · product guide. yard. ramps steel . platforms dock . boards dock . plates...
800.433.2212www.bluffmanufacturing.com
PRODUCT GUIDE
YARD RAMPS
STEEL PLATFORMS
DOCK BOARDS
DOCK PLATES
RAIL BOARDS
DOCK LEVELERS
WHEEL RISERS
CRASH GUARD™
MEZZANINE STRUCTURES
CONVEYOR CROSSOVERS
STAIRWAYS, LANDINGS, LADDERS
CANTILEVER RACK
2 Bluff Manufacturing • 800.433.2212 • www.bluffmanufacturing.com
STEEL DOCK BOARD Model SC• Steelplatewithweldedsteelcurbsandlockinglegs.• Designedfor3,000to4,000poundcapacityforkliftsinlightuseapplications.
• Liftingchainsincluded.Speedy Board®option(p.4)available.• Capacity10,000and13,000pounds.• Widthof60"and72".Lengthsfrom36"to72".
STEEL DOCK BOARD Model T• All-weldedsteelconstruction,doublebenddesign.• Usewithconventional,refrigerated,orcontainertrailers,orforbelowdockconditions.
• Capacitiesfrom15,000to40,000pounds.• Twofour-holepinpocketsplacedoneachedgeforflexiblepositioning.
• Boardisheldinpositionusingtwo1”stress-proofsteelpins.• Fold-downliftingloops.Speedy Board®option(p.4)available.• Widthsfrom60"to96".
STEEL DOCK BOARD Model TFL• Samebasicdesignasthe“T”dockboard,butuseslockinglegsinlieuofsteelpins.
• Fold-downliftingloops.Speedy Board®option(p.4)available.• Notrecommendedforbelowdockloading.
STEEL DOCK BOARD Model TNB • Single-benddesignwithliftingchainsandfull-widthlockinglegs.• Liftingchainsincluded.Speedy Board®option(p.4)available.)• Notrecommendedforbelowdockloading.
RED PIN STEEL DOCK BOARD Model C•All-weldedsteelconstruction.•Fordifficulttrailer-to-dockpositions.•Providesafeloadingconditionsforcontainerandpark-outapplications.
•Dual-pinlockingsystemwithfulllengthsidepockets.• Fold-downliftingloops.Speedy Board®option(p.4)available.•Capacitiesfrom15,000to40,000pounds.•Widthsfrom60”to96”.Lengthsfrom48”to120”.
DOCK BOARDS
Fully-weldedsteeldockboardsprovideasaferampforpoweredvehicleapplications.SelectingtheproperBluffproductforyourapplicationwillimproveproductlife,safety,andloadingefficiency.ReviewtheDock Board Selection Guideonp.5beforeorderingtoensureyourproductselectioniscorrect.
SC
TFL
TNB
C
Manufactured and tested in compliance with ANSI Standard MH30.2
T
3Bluff Manufacturing • 800.433.2212 • www.bluffmanufacturing.com
Manufactured and tested in compliance with ANSI Standard MH30.2
R
LOCKING RING DESIGNRAIL BOARD PLACEMENT
FLARE OPTIONS
Ask about the Options and Accessories available for Bluff Dock Boards
•SpeedyBoardCutouts,p.4 •LiftingChains,p.4
•EZRollHandles,p.4 •LiftingLoops,pp.2-3(shownonModelsT,TFL,&C)
All rail board applications are factory quoted upon receipt of a fully completed Rail Board Worksheet.
DOCK BOARDS
UNDERSTRUCTURE
CONTAINER RAMP Model CR• Theperfectanswerforloadingandunloadingshipping
containers.• Builttoughtowithstandheavyuse• Safelynavigatethetransitionfromgroundtothe
containerbed• Manufacturedforusewithhandorpoweredequipment• Fullwidthstiffenerprovidesstrengthandsecurefitagainst
thecontainer• Lockingchainswithaspeciallydesignedkeeperallowyou
toeasilylocktherampintotheholesinthecontainer• StandardsizedContainerRampsareavailablein15,000to
30,000capacities.Othersizesavailable.
RAIL BOARD Model R•All-weldedsteelconstruction.•Capacitiesfrom15,000to90,000pounds.•Rectangularorflareddesign.•Boxunderstructureforstrengthandsafety.•Heavy-dutylockingringsforsafe,securepositioning.•Liftingloopsfoldflatintorecessedpockets.Speedy Board®option(p.4)available.
•Railboardsarecustomdesignedandbuilttomatchthespecificdockconditions.Worksheetrequiredpriortomanufacturingtoensureproperfit.
•Designedforuseonalltypesofrailcarsincludingrefrigeratedandspecialcarsforthelumberandpaperindustries.
CR
4 Bluff Manufacturing • 800.433.2212 • www.bluffmanufacturing.com
ALUMINUM DOCK BOARD Models AC & BC•Capacitiesfrom10,000to15,000pounds.•Full-lengthstructuralsteelbolt-oncurbsforincreasedstrengthandtopreventrunoff.
•Lockinglegsprovidesecurepositioning.•Standardliplengthforconventionaltrailersis11”,optionof14”forrefrigeratedapplications.
•Widthsfrom60”to72”,andlengthsfrom36”to96”.
ALUMINUM DOCK BOARD Model ATD• Designedforlightdutyinlowtomediumvolumeapplicationswithaforkliftorpalletjack.
•Weldedaluminumconstructionwithextrudedcurbsandlegs.• Capacitiesof10,000and15,0000pounds.• Lengthsrangingfrom36”to72”.Lockinglegsinlengthsfrom8”to13”.
ALUMINUM SPRING LOADED DOCK PLATE Model SL• Recommendedforloadingapplicationsinvolvinghandtrucks/dolliesandpalletjacks.
• Top-of-dockmounted,verticallystored.Dualspringliftassist.• OptionalKickPlatesandNon-SkidTapesurfaceavailable.
ALUMINUM DOCK PLATE Models A & B•Recommendedforlightactivity,non-poweredloadingapplications.•Bolt-onsteellegsforsecuringbetweenthedockandthetrailer.•Standardliplengthforconventionaltrailersis11",optionof14"forrefrigeratedapplications.
•Availableintwocapacityranges.Widerangeofsizesavailable.
OPTIONS AVAILABLEEZ-Roll Attachment: Onepersonpositioningwithouttheuseofaforklift.Telescopinghandlestoresawaywhileboardisinuse.
Lifting Chains: Forpositioningofboardbyforklift.
Speedy Board® Cutouts: Allowstheforkliftdrivertheabilitytomove,place,andretrievetheboardwithoutexitingtheforklift.Fordockboardsonly.
Aluminumproductsareidealforlowtomediumvolumedockloadingapplication.Aluminumisagreatsolutionforcoastalareasorthefrozenfoodindustryusewherehumidityand/ormoistureispresent.BluffdockboardsanddockplatesaremanufacturedandtestedincompliancewithANSIStandardMH30.2.
A-B
AC-BC
EZ-ROLL
LIFTING CHAINS
SPEEDY BOARD
DOCK BOARDS AND DOCK PLATES
ATD
SLPatentNo.D633,684
OptionalKickPlateandNon-SkidTape
5Bluff Manufacturing • 800.433.2212 • www.bluffmanufacturing.com
Whenmakingdockboardand/ordockplateselections,youshouldconsidertheextremesratherthantheaverages.
CAPACITYPLATES• Weightofequipmentandheaviestload.
BOARDS• Seechart:
•Capacityratedforsingle-shiftoperationata3mileperhourmaximumrateoftravel.•Stackersandothernarrowaisleloadersshouldnotbeusedonadockboard.•Paperrollclampandmulti-shiftloadingadd5,000poundstotheboardcapacity.
LENGTH
Todeterminetheproperlengthofadockboard/plate,threeitemsarerequired:
1. Dockheight(D)2. Heightofhighesttruck(T)3. Gradabilityofloadingequipmentused.
EZ-ROLL
CAPACITY SELECTION CHART4-Wheel Forklift Lifting Capacity
3-Wheel Forklift Lifting Capacity
Board Capacity Required
2,000–3,000 2,000 10,0003,000–4,000 2,500 13,000
5,000 3,000–3,500 15,0005,000–6,000 4,000–5,000 20,000
MAXIMUM TRAILER HEIGHT SERVEDFreightLineTrailers 46”-56”FlatbedTrailers 50”-60”+BobTailTrucks 46”-48”Containers 56”-62”RefrigeratedTrailers 50”-60”
WIDTH
Bluffrecommendsaminimumproductwidthof12”to18”widerthantheoverallwidthofthevehicleorpalletused.Forimprovedendloadingefficiency,youmayconsiderincreasingboardwidth,asshowninthediagram(onright).
DOCK BOARD SELECTION GUIDE
6 Bluff Manufacturing • 800.433.2212 • www.bluffmanufacturing.com
Asafeandcosteffectiveanswertomanyloadingdockissues.Yardrampsaretypicallyusedinground-to-dockorground-to-truckapplications.Availablewithorwithoutundercarriage.
STEEL YARD RAMPS Model SYS•All-steelweldedconstruction.
•Capacitiesfrom16,000to90,000pounds.Widerangeofsizesoffered.
•Curbs8"tallforsafetyandgreatercapacity.
•Beveledapproachprovidesasmoothtransition.
•Solid18”rubbertiresprovideexcellenttractionwithoutworryofpuncture.Pneumatictiresoptional.
•Double-actinghydraulicpumptoadjusttheportableunittotheproperposition.
•Portable36’unitincludesa6’level-offforloadingandunloadingendpallets.
•Stationaryrampissecuredtothedockbychainsoroptionaldockchainbrackets,andissoldwithoutunder-carriageforpermanentplacement.
•30'straightdesignforquickloadingfromdocktoground.
•Lippurchaseintotraileris16".
•Capacityofyardrampselectedmustbegreaterthanthecombinedweightoftheheaviestforkliftandtheheaviestweightofanticipatedloadsitwillcarry.
•Thewidthshouldbeatleast15”widerthanthewidestequipmenttobeusedontheramp.Usablewidthis6”lessthanoverallwidth.
MAXIMUM & MINIMUM SLOPES, LIP HEIGHTS, LIP LENGTHSLength & Configuration 30’ Straight
Incline30’
Level-Off 36’ Straight
Incline36’
Level-OffWheelDiameter 18” 18” 18” 18”MaximumUsableLipHeight 72” 63” 74” 67”PercentofGrade 23% 23% 19.3% 19.3%DegreesofIncline 13.0° 13.0° 10.9° 10.9°MinimumUsableLipHeight 40” 32” 42” 33”PercentofGrade 11.6% 11.8% 10.1% 9.2%DegreesofIncline 6.2° 6.2° 5.3° 5.3°
OPTIONS AND ACCESSORIES•Rampclamportowbarisincludedasstandardequipment.
•Pneumatictiresareavailableforuseonunevensurfaces.
YARD RAMPS
PortableYardRampwithundercarriageand6’level-offforground-to-truckuse.
StationaryYardRampwithnoundercarriageforground-to-dockuse.
7Bluff Manufacturing • 800.433.2212 • www.bluffmanufacturing.com
RAMP CLAMP•Assistsoperatorinmovingtheyardrampovershortdistances.
•Forklifttineinsertsintotheswivelingliftloopandissecuredbyalockingdevice.
TOW BAR•Towbarfeaturesafast-locking,easyhook-uptotheyardrampandmakestowingoverlongerdistancespractical.
•Aquickdisconnectfeatureimproveshandlingefficiency.
GIRDERS•Heavy-dutyformedsteelsidegirdersprovidemainload-bearingcapability.
•SteelsidegirdersweldedtosteelZcrossmembersformasuperiorframe.
HYDRAULIC PUMP•Hydraulicsystemallowsforsmoothandquickraisingofthefrontliptotheproperdockortrailerheight.
•Thepumpismountedinternallytoprotectitfromaccidentaldamage.
•Double-acting.
• Twohydrauliccylinders.
GRATING•Self-cleaning,serratedgratingprovidesexcellenttractionandtheopendesignpreventsbuild-upofwater,snow,oil,grease,andmiscellaneousdebris.
•Thelowerendapproachplateprovidesmaximumsupportandsmoothtransitionontotherampgratingsurface.
•Note:Gratingnotsupportiveofforkliftturningmaneuvers.
MINI RAMPS Model MR• All-steelconstructionwithnoundercarriage.
• Mini-Rampavailablein15’and18’lengths
• MiniRampwidthsfrom70”to84”.
• Capacitiesfrom12,000to30,000pounds.
• Servicesheightsfrom16”to32”.
• Optionalmobilitypackageincludestwoscrewjackswithsteelcasters.
GRATING
YARD RAMP FEATURES AND OPTIONS
TOW BARRAMP CLAMP
GIRDER
HYDRAULIC PUMP
8 Bluff Manufacturing • 800.433.2212 • www.bluffmanufacturing.com
EDGE-OF-DOCK LEVELER Model EP•Positionedbyliftingaself-storinghandleandpullingthehandletothedockfloor.(Seeillustrationbelow.)
• Hydraulicoptionavailable.
•Latchassemblyactivatesthelipforwardtothefloorofthetrailerasthehandleislifted.
•Automaticallyreturnstostoredpositionwhentruckleaves.
•Bumperandbumperblocksareincluded.
•Steelfacedbumpersavailable.
•Capacitiesfrom20,000to30,000pounds.
•Widthsof66”,72”&78”.
•Refrigeratedlipoptional.
LO-DOCK LEVELER Model LD•RaisesEdge-of-DockLevelerstoproperworkingheight.
•Workingrangeof5”aboveand5”belowdock.
•Raisepresentdockheightasmuchas11”withoutexpensivealterations.
•Completelyassembled;nositeweldingrequired.
•Easilyinstalledonanyconcretedockwithoutweldingormodifications.
•Capacitiesfrom20,000to30,000pounds.
•Hydraulicoptionavailable.
•Becauseofgradabilityproblems,docklevelersarenotrecom-mendedforusewithpalletjacksorstackers.
•Refrigeratedlipisoptional.
•Lo-DockLevelerisavailablewithDoorSealOption.
LD
EP
LD WITH DOOR SEAL
DOCK LEVELERS
EDGE-OF-DOCKLEVELERWITHEZPULLHANDLE
DOORSEAL
OPTION
Fastandeasytooperate,Bluff’sEdge-of-DockLevelerispositionedbyliftingaself-storinghandleandpullingthehandletothedockfloor.Thelatchassemblyactivatesthelip,movingitforwardtothefloorofthetrailerasthehandleislifted.Whenreleased,thehandleautomaticallyreturnstoastoredposition.
9Bluff Manufacturing • 800.433.2212 • www.bluffmanufacturing.com
WHEEL RISERS•Eliminateunsafe,belowdockloadingconditions.
•Reducedamagetoloadingequipment.
•Positiontrailersproperlyabovedockformoreefficientloading.
•Heightsupto12".Widthsof18”and24”.
•Lengthstoaccommodatebothsingle,dual,ortandemaxletrailers.
•Wheelriserscanbeportableorpermanentlypositioned.
•Customsizesavailable.
STEEL WHEEL RISERS Model SWR• Tabsforanchoring
ALUMINUM WHEEL RISERS Model AWR• Handholdsforeasymoving.
STEEL PLATFORMS Model SP•Affords90degreeturnabilityforsafeforkliftmaneuvering.
• Fast,economicalwaytoexpandyourdockareaandincreasefreighthandlingcapabilitieswithouttheexpenseofsiteorconcretework.
•Optionaladjustable,telescopinglegsof44”to55”allowelevationstomeetmostdockheightrequirements.
• Steelplatformscaneasilyberelocatedtootherareaswhereafree-standingloadingdockmaybeneeded.
SWR
AWR
SP
9
WHEEL RISERS & PLATFORMS
YARD RAMP SHOWN WITH STEEL PLATFORMPLATFORM SHOWN WITH OPTIONAL HANDRAILS
ANDEDGE-OF-DOCKLEVELER
10 Bluff Manufacturing • 800.433.2212 • www.bluffmanufacturing.com
SR
MPB
SRB
ImproveplantsafetyandefficiencywithCrashGuard™byreducingthecostsassociatedwithemployeeinjury,machinerydowntime,insuranceclaims,andbuildingrepairsduetoaccidentalcollisions.
CRASH GUARD SAFETY PRODUCTS
CHANGEPHOTOTONEWMODEL
SRT
TUFF GUARD SAFETY RAIL Model SRT•Installsinminuteswithordinaryhandtoolsandconcretedrill.
•Formed10gaugesteelrailsinlengthsupto12'.
•Railscanwithstandimpactsof10,000poundstravelingatfourmilesperhour.
•Baseplatesare8"squarex1/2"thicksteel.
•Fastenersareincluded.
•Roundedtoprailswillpreventinjuriesandprovideaddedpersonnelprotection.
Original Crash Guard design available. Call for information.
MODULAR PROTECTIVE BARRIER Model MPB•Inexpensiveandsimpleanswertosolvingdifficultsafetybarrierprotectionproblemsinyourplant.
•Simpletoinstall,add-onorcustomizeguardraillengthsinthefield.
•Light-weight“liftout”designallowstemporaryaccesstospecificareasquicklyandsafely
•42”doubleguardrailmeetsOSHAguidelinesforfallprotection.
•Formed11gaugesteelrailsinlengthsupto10’.
•Installationhardwarenotincluded.
BOLLARD Model SRB•Protectpersonnel,machineryandstructures.
• Simplyboltintoposition–noconcreteworkrequired.
• 42”high,6”I.D.sch40pipe.
•10”x10”x5/8”base.
•PlasticCap.
•3/4”mountholes.
•5/8”anchorsprovided
11Bluff Manufacturing • 800.433.2212 • www.bluffmanufacturing.com
DOOR TRACK PROTECTORS Model DG•Protectsoverheaddoortracksfromdamage,reducingoverallmaintenancecosts.
•Chamferededgereducesriskofhandinjurywhenloweringdoor.
•Wrap-aroundtrackdesignallowsfreedooroperation.
•Columnsare3/16"thicksteel.
•ModelDGbaseplateis3/8"thicksteelwiththree5/8"holes(fastenersnotincluded).ModelDG-3baseplateis1/4”thicksteelwiththree5/8”holes(fastenersnotinclud-ed).
POST PROTECTOR Model PO•Variousthicknessprotectionsavailablein1/4",3/8"and1/2".
•Heightprotectionavailablein12",18"and24".
•Standardmodelsfitaroundrackpostsupto4"wide.
RACK GUARD Model RG•Asimpleandinexpensivewaytoabsorbforktruckimpactthatcandamagepalletrackuprightsandvaluableproduct.
•Heavydutydesign.
•Wrap-aroundfeatureprotectsrackfrombothfrontandaisledamage.
•Boltedtofloorforextrastability.
MACHINE GUARD Model MG• Fullyweldedunitcreatesbarriersbetweentraffic
areasandvaluablemachinery
• Heightsavailablein10”,24”,and42”sizes
• 4”squaresteeltubingwith½”x8”x8”baseplates
• 5”squaresteeltubingcomeswith1/2”x10”x10”baseplates
• Quickandeasyinstallation
DG-3
PO RG
11
AllCrashGuardSafetyProductscomestandardwithaSafetyYellowpowdercoatfinish.Availableinsixstandardcolors,customcolors,andgalvanizedfinish.
Safety Yellow Gloss Orange Red Letter Blue Ribbon Campus Green Gloss Black
CRASH GUARD SAFETY PRODUCTS
MG
DG
12 Bluff Manufacturing • 800.433.2212 • www.bluffmanufacturing.com
MEZZANINES
MEZZANINE STRUCTURES
• Non-weldedboltconnectionsandflexibilityofdesignallowforfuturemodifications,relocationand/orexpansionandpotentialreconfiguration.
• Equipmentandmachinerymountingoptionsavailable;multi-tieredintegrationofexistingstructures.
• Maximizationofverticalclearanceforexceptionalunder-mezzaninespaceutilization.
• Highqualitydesignandstandardizationofcomponentstokeepinstallationcostsdown.
General Mezzanine Specifications• Free-standing,pre-fabricatedstructure.Requires
noon-sitewelding.
• RegisteredStructuralEngineertosuperviseorapprovealldesignsanddetails.
• Engineering(PE)sealonfinaldrawingswhereapplicable.
• Pre-fabricationdrawingssubmittedforapproval.
• StructuraldesigninaccordancewiththeAmericanInstituteofSteelConstruction(AISC)ManualofSteelConstruction.
• JoistConstructionperformedinaccordancewiththeSteelJoistInstitute(SJI).
Thereareseveraloptionsavailablefordecking(bargrating,B-deck,wood).Specialoptionsincludeswinggates,stair-waysandworkplatforms,dropplates,customopenings,horizontalhandrailsandconveyorsupportsystems.
13Bluff Manufacturing • 800.433.2212 • www.bluffmanufacturing.com
CONVEYOR CROSSOVERS AND STAIRWAYS
CONVEYOR CROSSOVERS
Bluff’sgoalistoprovideyouwithcrossoversolutionswhichmaximizetheefficiencyofyouroperationsandminimizethecostlypotentialofinjurybykeepingyourpersonnelsafe.
Conveyor Crossover Specifications• Weldedsteelconstructionforlongerlifecycleandlower
maintenancecosts.
• Customizationofcapacitiesandconfigurations,pecificwidthsandverticalclearances.
• AlternateconfigurationsincludingU-shaped,Z-shapedandL-shapedwithintermediatelandingswherenecessary.
STAIRWAYSBluffstartsitsproductplanningwithanassessmentofyourstairwayapplicationneeds.Ourprofessionalengineersthendevelopaplanwhichcaneitherbeintegratedintoyourexistinginstallationorcanbeanew,freestandinginstallation.AllstairwayssystemsareIBC,UBSandOSHAcompliant.
Stairway Specifications• 36”standardwidth.Customizationavailable.
• Treadoptions:bargrateordiamondplate.
• Closedrisers.
• Customsizesandconfigurations:straight,L-ShapedandU-shapedrunswithintermediatelandings.
• Stairtowersystemsaredesignedtomeetyourexactheightandspacerequirements.
• Standardstairwayconsistsof3parts:2stringerswithweldedhandrailandgriprail;treadsboltedbetweenstringers.
14 Bluff Manufacturing • 800.433.2212 • www.bluffmanufacturing.com
LANDINGS AND LADDERS
Ifyouhaveaverticalriseexceeding12feet,youmusthaveanintermediatelanding.Bluffwillactivelyworkwithyoutodesignanddevelopthemostfunctionalandefficientstairsystempossiblewithinyourspaceconstraints.Landingscanbeprovidedwithstairsorsoldseparately.
Landings Specifications• Fixedhandrailincompliancewithapplicablecode
• Gateoptionsforplatformlanding
• Customsizesandconfigurations(straight,L-shapedandU-shapedruns)
• Toplandingsavailableforspecificingress/egressrequirements
• Choiceofdeckingmaterial
LANDINGS
LADDERS
Designapplicationsincludesimplefixedladders,cagedanduncagedladdersaswellasshipsladders.AllBluffladdersaredesignedandconstructedincompliancewithOSHAandANSIStandards.
Straight Ladders• All-weldedsteel.
• Requirecagingwhenheightsexceed20’.
• Intermediatelandingrequireswhenover30’.
• Rungsare3/4”serratedroundrebar.
• Handrailextends42”abovetoprung.
Ships Ladders• Boltedsteel.
• Nocagingrequirements.
• Intermediatelandingrequiredwhenover12’.
• Treaddepthof6”,widthupto36”.
• Ladderwith36”griprail,handrail42”abovetoptread.
• Threepiececonstructionconsistingof2stringerswithweldedgriprailandboltedtreads.
15Bluff Manufacturing • 800.433.2212 • www.bluffmanufacturing.com
CANTILEVER RACK
CANTILEVER RACK•Minimizefootprintofstoragespacewhilemaximizingverticalandhorizontalspaceusage.
•Capitalizeonthehigherliftingcapacityandoperationalcapabilityofcurrentliftingequipment.
•Reducehandlingtimeandenhanceefficiencyofinventorycontrol/managementthroughimprovedaccessibilitytostoragespace.
•Minimizecostofdamagedproductfromstoragestructureobstacles.
Arms• Thecapacityofacantileverrackisbasedontheupright
heightandthelengthofthearms.
• Cantileverarmsareeitherstraight(usedforstableloadssuchaslumber,steelsheets,cartons,etc.)orinclined(usedforcylindricalobjectsorloadswhichtendtorollforward).
• Armsarecompletelyadjustableon4”centers.Armsareweldedtoamountplatewhichisthenboltedtotheupright.
Upright Column•Uprightcolumnheighttakesintoconsiderationthelimitationsofceilingheightandceilingconditionssuchassprinklersystem,lightingfixtures,etc.aswellasthereachofyourliftingequipment.
•HighstrengthsteelcolumnsareeitherSingle-SidedorDoubleSidedandrangeinheightfrom8’to20’
•Columnsarepre-punchedwith4”centeredarmmountingholes.
Cantilever Base• Cantileverbasehasafactoryoptionofeitherbeing
completelyweldedconstructionorboltonconstruction.Bothoptionsprovideastable,rigidbaseconnection.
Brace• Bracingbetweenuprightsallowsforcontinuousrows
forlongerstockandforuninterrupted.
Options•MaterialTray–usedasaproductpanforlooselystoreditemsofvaryingsizes.
9201SouthFreeway•FortWorth,Texas76140•800-433-2212www.bluffmanufacturing.com
• Since 1968, the proven leader in quality dock and warehouse equipment
• Short lead times on manufactured items with 99% on-time shipping
• Quick ship items stocked in regional warehouses
• ATLANTA, GA
• CHARLOTTE, NC
• CHICAGO, IL
• CINCINNATI, OH
• FORT WORTH, TX
• LOS ANGELES, CA
• N. ARLINGTON, NJ
• SAN LORENZO, CA
• SEATTLE, WA
• TAMPA, FL