PRODUCT GUIDE - Cyclo...

Cyclo Toolmakers, Inc., 14320 Longs Peak Court, Longmont, CO 80504 U.S.A. | +1 (970) 535-0100www.cyclotoolmakers.com

LOWVIBRATIONRISK-FREE DURABLE POLISHER+

DURABLELOW MORE!VIBRATIONRISK-FREE

DURABLELOW

MORE!VIBRATIONRISK-FREE

LOWVIBRATION

LOWVIBRATION

COMP.CYCLO

VIBRATION COMPARISON IN G-FORCES

10

X T

HE

VIB

RA

TIO

N



DURABLELOW


LOWVIBRATION

LOWVIBRATION

COMP.CYCLO


10

X T

HE

VIB

RA

TIO

N



DURABLELOW


LOWVIBRATION

LOWVIBRATION

COMP.CYCLO


10

X T

HE

VIB

RA

TIO

N



DURABLELOW


LOWVIBRATION

LOWVIBRATION

COMP.CYCLO


10

X T

HE

VIB

RA

TIO

N

PRODUCT GUIDE

REV_NOV_11_2014


TWO HEADS ARE BETTER THAN ONEThe synchronized movement of the Cyclo Polisher’s dual orbiting heads most effectively mirrors the overlapping circular motion of fine hand polishing. The result is a perfectly balanced machine that produces less vibration and a mirror-like finish without swirl marks or risk of damage to paint.

Because of its dual headed orbital design, its polishing heads do not remain in one spot—even if the polisher is held in a stationary position. As a result, there is no heat build up. No burning, marring, gouging, or swirl marks can occur. Even a novice can produce professional-looking results without the risk of damaging a vehicle’s trim pieces or finish.

THE PERFECT BALANCEThe Cyclo Polisher’s patented dual head geometry relies on two counter-balanced heads that move in a random, overlapping pattern. This results in a uniquely balanced machine, both laterally and longitudinally. While each head is independently balanced, the two heads are also balanced with respect to one another via independent counterweights. As a result, the polisher can be operated one handed with ease and is an extraordinarily smooth running tool exhibiting very little vibration. Operators encounter none of the fatigue nor discomfort experienced with other polishing tools.

ENGINEERED TO LAST A LIFETIMEThe Cyclo Dual Head Orbital Polisher was engineered to enable an operator, skilled or unskilled, to produce an unrivaled mirror-like finish on both bare metal and painted surfaces. Its timeless design, featuring a die-cast polished aluminum alloy body is built to last. Hand assembled and serviced in the United States, it is not uncommon to see Cyclo polishers that are decades old and still actively in use. The Cyclo Dual Head Orbital Polisher’s worldwide reputation for durability and solid engineering is unparalleled.

THE PERFECT SHINE AND MOREIdeal for all automotive, marine, and RV finishes, the Cyclo Dual Head Orbital Polisher has been the #1 polisher of choice for vintage Airstream® trailer and aircraft enthusiasts for decades. It will polish paint, fiberglass, gel coat, metal, plastic, tile and even difficult surfaces such as diamond plate, pitted aluminum and glass. It’s even been used to remove puck marks from hockey arena boards.

EXPERTS IN THE MECHANICS OF POLISHINGSince 1953, we have been manufacturing the finest polisher on the market. Our reputation is based on quality manufacturing and engineering excellence. Today, Cyclo Toolmakers, Inc. continues to conduct research and testing to improve the design and performance of our polishers and accessories. We continue partnering with leading chemical manufacturers to ensure that our products meet the changing conditions in the marketplace. And, we constantly test our polisher against leading rotary and dual action polishers to ensure that the machine still provides the finest quality, swirl-free shine every time.

WILL NOT BURN PAINT

NO GOUGING

NO MARRING

SWIRL-FREE FINISH

PRO RESULTS FOR NOVICES



DURABLELOW


LOWVIBRATION

LOWVIBRATION

COMP.CYCLO


10

X T

HE

VIB

RA

TIO

N

LESS THAN 1/10TH VIBRATION

REDUCED HAND FATIGUE

LESS RISK TO NERVE ENDINGS

NEW VES™ COUNTERWEIGHT

SYSTEM



DURABLELOW


LOWVIBRATION

LOWVIBRATION

COMP.CYCLO


10

X T

HE

VIB

RA

TIO

N

HAND BUILT IN THE USA

EXPERTLY MACHINED

DIE-CAST ALUMINUM BODY

50+ YEARS OF QUALITY

NEW EXTENDED WARRANTY



DURABLELOW


LOWVIBRATION

LOWVIBRATION

COMP.CYCLO


10

X T

HE

VIB

RA

TIO

N

CLEANS UPHOLSTERY

SAFE FOR LEATHER

SCRUB FINE TO DURABLE

CARPETS

PERFECT FOR GEL COATS,

TILE & MORE



DURABLELOW


LOWVIBRATION

LOWVIBRATION

COMP.CYCLO


10

X T

HE

VIB

RA

TIO

N

CTI-08-014


Introducing three new

Accessories from Cyclo

Toolmakers: a detailing

clay alternative, a spray

lubricant and quick detail

spray, and a new polish

and swirl remover.

· Machine Alternative to Detailing Clay · Long Lasting · Fine and Medium Grades

· 4” PadsAchieve professional results faster with this advanced rubber polymer pad used in lieu of detailing clay. With the dual action of the Cyclo Polisher you can safely and effectively remove paint over spray, water spots, tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Cyclo Autoscrub Pads require the use of CTI Pro Paint Lubrication & Quick Detail Spray. Unlike clay bars, Cyclo Autoscrub Pad cans simply be cleaned with water even if dropped on the ground.

4 inch (100mm), Fine Grade (Blue), package of one PAIR, velcro loop backed (72-320x2)

4 inch (100mm), Medium Grade (Yellow), package of one PAIR, velcro loop backed (72-340x2)

Cyclo’s Nanoskin™ Autoscrub Pads

CTI Pro Paint Care™ Lubricant and Quick Detail Spray

· Advanced Lubrication for Cyclo Autoscrub Pads · A Streak-Free Quick

Detail Spray · Anti-StaticCTI Pro Paint Care Lubricant & Quick Detail Spray works uniquely with

the advanced, rubber-polymer pad technology found on Cyclo Nanoskin Autoscrub Pads and the chemical composition of clay bars. It provides the

necessary slick surface for the pads or clay bar to glide on. It is specially formulated for streak-free surface when used as a spray polish.

32 oz. (84-102)Trigger Spray Head (86-520)

RECOMMENDED APPLICATIONS:· Paint Swirl Removal · Paint Polish · Paint Light

Scratch Removal · Paint DeoxSpecially formulated to remove swirls, holograms, light scratches and oxidization. It is the perfect follow-up to Cyclo’s CTI Pro Paint

Care Light Compounding Liquid. It does not contain sealants and should be followed with our CTI Pro Paint Care Finishing

Wax and/or Protective Sealant.

16 oz. (84-146)

PRODUCT INNOVATIONS

CTI Pro Paint Care™ Polish and Swirl Remover

CYCLO and CTI PRO PAINT CARE are trademarks of Cyclo Toolmakers,

Inc. NANOSKIN and AUTOSCRUB are trademarks of Total Import Solutions, Inc.


Why is the Cyclo Polisher the world’s premier polisher? The answer can be found in its patented dual orbital heads. Rather than spin like traditional rotary polishers, the Cyclo Polisher’s heads rotate in an overlapping circular motion. Its movement is almost identical to hand polishing, only much quicker. That unique combination of motion, speed, and just the right weight makes it perfect for deoxidizing, buffing, and glazing paint and metals to a mirror finish.

Equally important, the Cyclo tool’s innovative design eliminates the two main problems that plague rotary polishers: heat build-up that can cause visible burns, gouges, and swirls, and vibration.VES technology standard on all Cyclo Polishers.

All Cyclo Polishers will include the advanced Vibration Elimination System (VES). VES is available exclusively on Cyclo Dual Head Orbital Polishers and includes completely redesigned counterweights and precision-matched, weighted inserts. Select the proper VES weighted inserts for the intended attachment system configuration and eliminate nearly all vibration.

Perfect for every polishing project.

The Cyclo Polisher’s legend began in 1953 when the tool was approved for use by the government to polish its military aircraft and missiles. During those years, the machine earned its reputation for durability and dependability as it was used on fleet after fleet of large airplanes. In fact, there are many 50-year-old Cyclo Polishers still in use around the world.

Today, the Cyclo Dual Head Orbital Polisher delivers superior polish on mainstream products such as automobiles, boats, and even Airstream™ RVs. Car dealerships, automobile detailers, car washes, and fleet users all rely on the Cyclo machine to keep their vehicles looking like new. Additionally, the Cyclo machine continues to be the choice for aircraft including the U.S. Air Force One fleet.

Cyclo Polishers

Polishing is just the beginning.

While the Cyclo Dual Head Orbital Polisher is legendary for its polishing capabilities, it also provides the user with versatility. Attach one of its many accessories, and this incredible machine can scrub carpets, buff windshields, sand flat or contour surfaces, or strip wax buildup from floors. It also removes puck marks from hockey arena boards.

Nothing outshines the Cyclo Polisher.

For polishing, versatility and value, the Cyclo Polisher is in a class by itself. To learn more, contact your Cyclo Toolmakers dealer, or visit us online at www.cyclotoolmakers.com.

Each Cyclo Polisher is expertly machined, manually polished, and hand-fitted to ensure durability and longevity. Its solid metal construction, machined fittings, precisely crafted gears and hand assembly make the Cyclo machine the world’s finest orbital polisher. In addition, this extraordinary tool is serviceable. Every part on a Cyclo Polisher can be replaced, ensuring that it will continue to perform at its highest level for years, even decades, after purchase.LOOK FOR THE SPACE-AGE BODY WITH ORBITING HEADS.

Polisher configuration including tapered conical motor housing, dual heads, and T-grip handle, is a registered design trademark of Cyclo Toolmakers, Inc. ©2006-2014 Cyclo Toolmakers, Inc.

The synchronized movement of the

Cyclo Polisher mirrors that of hand

rubbing – an overlapping circular

motion. And the Polisher’s twin heads

don’t spin in one place, so there’s no

threat of heat build-up or burn marks.

MODEL 5/5C & 6CE SPECIFICATIONSModel 5 (80-010) • Power Supply: 110-120 V a.c., 220 WattsModel 5C (80-020) • Power Supply: 220-240 V a.c., 220 WattsModel 6CE (80-030) • Power Supply: 220-240 V a.c., 220 Watts, meets European CE Standards • Motor: Alternating current, semi-enclosed 24-bar commutator • Speed: 3000 orbits/minute • Output: 1/3 H.P. (.25 Kw) • Weight: 6.5 lb. (2.9 kg) • Head Rotation/Diameter: Clockwise/4” • Model 5 Electric Cord: 9.5’ length, 16 ga/3 SJTOW • Model 5C/6CE Electric Cord: 2.5 m length, 1 mm2 • Housing: Heavy-duty cast aluminum

• Diecast, precision machined 380 aluminum alloy case • Tough ABS insulated handle • Sealed, steel ball bearings and needle bearings • Easily serviceable long-life carbon brushes • Sturdy high-torque motor with

integral metal cooling fan • Well-balanced ergonomic design • Helical cut nylon gears • Hardened steel gear shafts • Twin 3000 orbits per minute hand-action heads


Innovation Comes Standard With Every PolisherAs experts in the mechanics of polishing Cyclo Toolmakers have continued to advance the design of our polishers to meet the

demands of industry professionals. Our recent innovations include the first tuneable counterweight system to eliminate nearly

all vibration – the Vibration Elimination System™. Then we introduced the ProGuard™ Orbital Backing Plate. The one-of-

a-kind ProGuard features an integrated hook pattern that eliminates the delamination problem experienced by almost

every backing plate on the market.

Never ones to rest, our team of experts continued to work on improving the design of our polishers. Advancements in

professional detailing products and the changing needs of industry professionals required further development of the

design of our polishers. The result, the Cyclo Toolmakers Model 5-Pro Polisher.

Introducing Cyclo’s Advanced Variable Speed ControllerThe Cyclo Model 5-Pro Polisher is setting a new standard for professional detailing tools. Featuring Cyclo Toolmakers solid state variable

speed control unit, the advanced design provides precision control for a variety of applications with lasting performance.

Simply adjust the variable speed controller of the new Model 5-Pro Polisher and change the performance characteristics of the machine.

For example, reduce the speed when working in tight areas like around brake pedals, car seats, boat railings, aircraft propellers, wing tip

lights, side mirrors or door handles. Mid-range speeds work well to gently clean headliners, fine carpets and other less-durable fabrics.

Adjust the speed to meet the various performance characteristics of your favorite detailing products or to reduce product sling during initial application. With a

simple adjustment to the speed control dial, you have a wide array of capabilities without sacrificing the performance Cyclo tools have always delivered.

Risk-Free Polishing and a new Three Year, Worry-Free WarrantyThe Cyclo Polisher’s patented dual orbital heads eliminate the risk associated with using a rotary polisher. Rather than spin like

traditional rotary polishers, the Cyclo Polisher’s heads rotate in an overlapping circular motion. Its movement is almost identical

to hand polishing, only much quicker. This motion eliminates the danger of heat build-up, gouging trim pieces or leaving swirls.

Risk free polishing is only the beginning. With our new three year extended warranty, ownership of the Cyclo Model 5-Pro Polisher is

worry free. Each machine is hand-built in the United States to exacting standards and features sealed steel ball bearings, hardened

steel shafts and die cast precision machined 380 aluminum. And, superior-quality parts are only the beginning. Every polisher is

expertly machined then rigorously tested to ensure performance at its highest level for years, even decades.

The Complete Vibration Elimination System™ Standard on Model 5 PRO Series PolishersAll Cyclo Model 5-Pro Polishers include the full advanced Vibration Elimination System (VES). VES is available exclusively on Cyclo

Dual Head Orbital Polishers and the Model 5-Pro includes all three sets of precision-matched, weighted inserts. Select the proper VES

weighted inserts for the intended attachment system configuration for silky smooth operation.

Genuine Cyclo Dealers can order Cyclo Model 5-Pro Polishers with an optional 25’ power cord. There also exists the OEM option for a custom colored front and

rear handles and front handle custom imprinting. Call or email for pricing, minimums and ordering details.

Model 5-Pro Specifications:* Power Supply: 115 Volts, 60 Hertz, 220 Watts * Motor: alternating current, semi-enclosed 24-bar

commutator, Output: 1/3 H.P. (.25 Kw) * Variable Speed Range: 650 - 3000 orbits/minute

* Weight: 6.5 lb. (2.9 kg) * Head Diameter: 4” * Electric Cord: 10’ length, 16 ga/3 SJTOW * Housing:

heavy-duty cast aluminum * Variable Speed Controller * Three Year Warranty

* Complete VES System * Optional 25’ cord

Cyclo Model 5-Pro Polisher/Scrubber


The Legend ReturnsIntroducing the Cyclo Toolmakers Model 12A Pneumatic Polisher - the world’s only dual-head orbital pneumatic polisher.

Durability When we decided to reintroduce the pneumatic version of the legendary Cyclo dual-head polisher, we knew it had to provide lasting performance and durability. That is why only sealed steel ball bearings, hardened steel shafts and die cast precision machined 380 aluminum are good enough for the Model 12A Pneumatic Polisher. And, superior quality parts are only the beginning. Every polisher is expertly machined, built by hand and then rigorously tested to ensure performance at its highest level for years, even decades.

Low Vibration and Low Noise EmissionsThe quality of experience enjoyed during the operation of our polishers is an important feature of the Model 12A Pneumatic Polisher. So we designed the Model 12A Pneumatic Polisher to be ergonomically balanced and lighter than comparable tools for easier operation resulting in better performance. Additionally, each polisher comes with our advanced Vibration Elimination System™ of tune-able counterweights to reduce vibration. We have also developed a proprietary air chamber design and rear handle exhaust system that nearly eliminates motor emission noise without sacrificing power and torque.

Risk-Free and Swirl-Free Polishing Every TimeRather than spin like traditional rotary polishers, all Cyclo Polisher heads orbit in an overlapping circular motion. A movement almost identical to hand polishing, only much quicker. That unique combination of motion, speed, and just the right weight makes it perfect for deoxidizing, buffing, and glazing paint and metals to a mirror finish every time. And, the Cyclo tool’s innovative design eliminates the risk that plagues rotary polishers: heat build-up that can cause visible burns, gouges, and swirls in the finish.

More Than Just a PolisherPerfect for creating a swirl free finish, the Model 12A Pneumatic Polisher is also excellent for cleaning carpets and upholstery. Install a set of scrub brushes or apply pad covers over foam pads and you can safely scrub fine carpets or upholstery. Use a more aggressive brush to scrub walls, showers, truck beds and more.

Model 12A Specifications:* Air Pressure: Optimum operation at 90 p.s.i., 22 scfm * Motor: Pneumatic motor, Speed range: up to 3000 orbits/minute *

Weight: 6.5 lb. (2.9 kg) * Head Diameter: 4” * Recommend Hoses: 3/8” with 3/8” to 1/4” NPT Adapter * Extended NPT adapter line and exhaust muffler available * Housing: heavy-duty cast aluminum * Requires in-line air filter, dryer and lubricator

Cyclo Model12A Pneumatic Polisher


ProGuard™ Orbital Backing Plates: (Cyclo p/n 72-112x2)Use with loop backed foam or wool pads and features a low profile for improved control and a non-marking bumper for safe operation.

Rubber Pad Holders: (Cyclo p/n 79-101x2) Use with loop backed foam or wool pads. Fit directly over Cyclo Polisher head assemblies.

Head Assemblies: (Cyclo p/n 60-055)Use with foam or wool pads permanently attached to rubber bonnets. Most durable. Bonnets or Rubber Pad Holders fit directly over Cyclo Polisher head assemblies.

Cyclo Polisher Configurations

for Models 5, 5-Pro, 5C, 5C-Pro, 6CE and 6CE-Pro

CONFIGURATION INCLUDES:· Cyclo Dual Head Orbital Polisher · 2 Head

Assemblies · 2 Rubber Pad Holders · 2 VES Yellow Weighted Inserts · L Hex-Key Wrench · Flat Wrench

Version C-RPH includes everything you need for polishing with Velcro backed foam and wool pads.

CONFIGURATION VERSION C-RPH

CONFIGURATION VERSION C-PGCONFIGURATION INCLUDES:

· Cyclo Dual Head Orbital Polisher · 2 ProGuard™ Orbital Backing Plates · 2 VES Blue Weighted

Inserts · L Hex-Key Wrench · Flat WrenchOur most advanced configuration for hook and loop attachment.

Version C-PG includes our new backing plate system for polishing with Velcro backed foam and wool pads.

CONFIGURATION VERSION C-HEADCONFIGURATION INCLUDES:

· Cyclo Dual Head Orbital Polisher · 2 Head Assemblies · 2 VES Yellow Weighted Inserts

· L Hex-Key Wrench · Flat WrenchConfiguration version C-HEAD includes just the basics to get started.

This is perfect if you plan to use foam and wool bonnets.

CONFIGURATION VERSION C-WHBRUCONFIGURATION INCLUDES:

· Cyclo Dual Head Orbital Polisher · 2 White Standard Carpet Brushes · 2 VES Silver

Weighted Inserts · L Hex-Key Wrench · Flat Wrench

Configuration version C-WHBRU includes the white scrubbing brushes. The white brush is designed for more vigorous cleaning. It

is recommended for floor pads and more durable carpets. The White Standard Carpet Brush is stiffer and less giving, but more durable

than the Aqua Soft Carpet Brush.

We have matched these polishers with our most popular attachment configuration systems to make ordering even easier.

Please note that all Pro Models will have the full set of VES Weighted Inserts (3 colors).

PAD ATTACHMENT ALTERNATIVES

Pad Covers: Use with foam pads or bonnets. Pad covers fit snugly over foam pads which are attached to Rubber Pad Holders or ProGuard Orbital Backing Plates. Alternatively use with foam bonnets attached to head assemblies. Autoscrub Pads: Attach directly to Rubber Pad Holders or ProGuard Orbital Backing Plates. Fastcut™ Discs: Attach directly to Rubber Pad Holders or ProGuard Orbital Backing Plates. Proshine™ Discs: Attach directly to ProShine Interface Pad which is attached to Rubber Pad Holders or ProGuard OrbitaL Backing Plates.

ACCESSORIES ATTACHMENT


Extend the life of all of your

detailing accessories with

CTI Pad Care products.

Dissolves compounds and

polishes, removes build-

up that can destroy pads.

Excellent for bio-friendly

wheel and tire cleaning.

PERFECT FOR:,› Foam Pad Cleaning

› Wool Pad Cleaning

› Cleaning Bonnets

› Cleaning Pad Covers

› Cleaning Brushes

› Wheel Cleaning

› Tire Cleaning

RECOMMENDED APPLICATIONS:

· Foam and Wool Pad Cleaner · Brush Cleaner · Non-Acid

Wheel and Tire Cleaner · Concentrated Formula

CTI Pad Care High Concentrate formula is ready for dilution with water and use with a spray applicator.

Dilute then spray directly onto each pad or brush for deep cleaning. Or, mix with warm water to soak pads

and scrub brushes after use. CTI Pad Care High-Concentrate 16 Fl. oz. (84-406)

Additional Dilution and Application Suggestions:Dilute 2:1 to 6:1 for carpet and upholstery cleaning ·

Dilute 3:1 for wheel and tire cleaning ·Dilute 6:1 for pad cleaning ·

Dilute 10:1 for brush cleaning ·Dilute 20:1 for pad cleaning soak ·

Dilute 30:1 for general cleaning ·

HIGH CONCENTRATE PAD CLEANER

PAD CLEANER WITH SPRAY APPLICATOR


· Ready-to-use Applicator · Foam and Wool Pad Cleaner · Brush

Cleaner · Non-Acid Tire and Wheel Cleaner

CTI Pad Care Cleaner With Spray Applicator is convenient and ready for use. No mixing necessary. Simply spray each pad,

brush or other accessory 3 to 4 times for a deep cleaning. Dissolve embedded polishes and compounds, remove wax

build-up and pollutants to extend the life of pads. Perfect for clean and care of scrub brushes as well.

CTI Pad Care Cleaner with Spray Applicator 4 Fl. oz. (84-404)

CTI Pad Care™

Clean pads last longer and perform better.


RECOMMENDED APPLICATIONS:· Bug Removal · Paint Deox · Paint Compound · Paint

Scratch Removal · Metal Polish/CleanerScrubs away hard to remove materials such as bugs, tar, and sap.

Also used as a more aggressive deoxidizer.

Box of Two Foam Bonnets, ( Cyclo p/n 71-160x2), Box of Four Foam Pads, (Cyclo p/n 72-160x4 )

YELLOW SCRUBBING PADS

ORANGE COMPOUNDING AND POLISHING PADSRECOMMENDED APPLICATIONS:

· Paint Polish/Cleaner · Paint Deox · Paint Compound · Metal/Chrome Polish

An exceptional, all-in-one cleaning and polishing pad. This high density pad has the power to remove lights scratches and polish the surface.


YELLOW CUTTING PADSRECOMMENDED APPLICATIONS:

· Paint Polish/Cleaner · Paint Compound · Paint Deox · Paint Scratch Remover

A firm, versatile pad that can be used on everything from compounding and scratch removal to applying paint cleaners and polishes.


GREEN POLISHING PADSRECOMMENDED APPLICATIONS:

• Excellent for One-Pass Polish and Seal • Paint Deox • Paint Sealant • Paint Polish • Paint

Cleaner • Metal SealantA more aggressive pad than our white or blue pads. The pore

density makes it perfect for polishing and removing light oxidation for a stunning shine.


WHITE FINISHING PADSRECOMMENDED APPLICATIONS:

· Extreme Shine · Final Wax Buff · Wax Application · Sealant · Metal Sealant

This superfine pad is used in final buffing, after initial polishing with other pads. Excellent for applying sealants and buffing out wax.


BLUE POLISHING PADSRECOMMENDED APPLICATIONS:

· Paint/Metal Sealant · Paint Polish · Paint Cleaner · Final Wax Buff · Wax Application

The perfect pad for light polishing on any surface. Use with wax and polish for a fine gloss finish or to remove swirl marks.

Box of Four Foam Pads, (Cyclo p/n 72-115x4 )

FOAM PADS AND BONNETS

Use your Genuine Cyclo ® foam

pads for metal and paint cutting,

compounding, polishing, waxing,

buffing, and scratch and swirl

removal.

PERFECT FOR› Paint Cutting

› Paint Compounding

› Paint Scratch Removal

› Paint Polishing

› Paint Cleaning

› Final Wax Buff

› Extreme Shine

ATTACHMENT ALTERNATIVES

BONNETS (71-SERIES)Foam permanently attached to rubber bonnets. Most durable. Bonnets fit directly over Cyclo Polisher heads.

HOOK AND LOOP(72-SERIES)Foam and wool discs with Velcro style backing for quick, easy multiple pad changes. Requires ProGuard Orbital Backing Plate (79-112x2) or Rubber Pad Holders (79-101x2) which are placed directly over the Cyclo Polisher heads.


Use your Genuine Cyclo ® wool pads for metal and paint polishing. Also perfect for scratch and swirl removal.

PERFECT FOR:› Metal Polishing› Metal Cleaning› Paint Compounding› Paint Scratch Removal› Swirl Mark Removal› Headlight Restoration

ATTACHMENT ALTERNATIVES

BONNETS (71-SERIES)Foam permanently attached to rubber bonnets. Most durable. Bonnets fit directly over Cyclo Polisher heads.

HOOK AND LOOP(72-SERIES)Foam and wool discs with Velcro style backing for quick, easy multiple pad changes. Requires ProGuard Orbital Backing Plate (79-112x2) or Rubber Pad Holders (79-101x2) which are placed directly over the Cyclo Polisher heads.


· Metal Polish/Cleaner · Paint Deox · Paint Compound · Paint Swirl Removal

The preferred multipurpose wool/poly pad, used for metal polishing and aggressive paint compounding. This pad

is excellent for removing swirl marks and scratches.

Box of Two Wool Bonnets, ( Cyclo p/n 71-455x2), Box of Four Wool Pads, (Cyclo p/n 72-455x4 )

THE ORIGINAL CYCLO CUTTING WOOL

YELLOW MEDIUM CUTTING WOOLRECOMMENDED APPLICATIONS:

· Paint Cutting · Paint Deox · Paint Compound · Paint Scratch Removal

A wool/acrylic blend with a moderately aggressive texture that is perfect for reducing significant pits and scratches.

Excellent pad for everyday cutting.

Box of Four Wool Pads, (Cyclo p/n 72-435x4 )

WOOL PADS AND BONNETS


Use Genuine Cyclo ® Brushes to bring life back into worn carpet pile, to safely remove stains from rugs and headliners, or to clean upholstery.

PERFECT FOR:› Upholstery› Carpets› Leather› Auto Interiors› Auto Seats› Truck Beds› RV Interiors› Fine Carpets› Floor Mats› Tile & Grout


· Upholstery · Fine Carpets · Fine Interiors

The ideal brush for delicate surfaces. Each bristle is “flagged”, a technique that splits ends into multiple fine tips. Ideal for use on headliners, leather, and other more

fragile upholstery, and natural fiber fine carpets.

Box of Two Brushes (76-810x2)

GENUINE CYCLO

BRUSHESGRAY ULTRA SOFT UPHOLSTERY BRUSH

AQUA SOFT CARPET BRUSH

WHITE STANDARD CARPET BRUSH

BLACK STIFF SCRUB BRUSH


· Fine Carpets · Durable Carpets · Auto & RV

Carpets & UpholsteryThis brush features medium crimped bristles for a gentle yet

thorough cleaning. Each brush kneads and vibrates loose any soil or debris and is perfect for most carpets.



· Auto & RV Carpets & Interiors · Tile & Grout · Durable

CarpetsThis is our must-have brush. The white brush is designed for

more vigorous cleaning. It is recommended for floor pads and more durable carpets. The Standard Carpet Brush is stiffer and

less giving, but more durable than the Soft Carpet Brush.



· Tile & Grout · Truck Bed LinersOur most aggressive brush. This brush provides

exceptional scrubbing power on tough surfaces. Used for cleaning tile, stone floors, and pick-up

truck bed liners.



RECOMMENDED APPLICATIONS:· Extreme Shine

An ultrasoft cover used for final touches. Use to remove all surface residue.

Package of Four Pad Covers (73-515x4)

MICROFIBER SUEDE PAD COVER

MICROFIBER TERRY PAD COVER

COTTON TERRY PAD COVER

PROSHINE™ DISCS

RECOMMENDED APPLICATIONS:· Final Wax Buff

The preferred cover for applying polish and buffing wax. Its hooked fibers

remove surface residue.


FASTCUT™ 600 GRIT DISCS

RECOMMENDED APPLICATIONS:· Final Wax Buff · Upholstery

A 100% cotton terry cover. Perfect for cleaning interior surfaces and for buffing, polishing,

and drying exterior surfaces.


RECOMMENDED APPLICATIONS:· Plexiglass · Paint Scratch Removal

A unique, resilient and cushioned abrasive disc available in grades of 1,500, 2,400, 4,000, 6,000, 8,000, and 12,000.

Package of Four Discs (72-701x4, 72-702x4, 72-704x4, 72-706x4, 72-708x4, and 72-712x4)

RECOMMENDED APPLICATIONS:· Tile and Grout · Ice Hockey Rink Walls

· Rust Removal This coarse nylon pad is strong, durable, and specifically

designed for rough surface areas.

Package of Ten Discs (74-660x10)

PAD COVERS AND DISCS

Use your Genuine Cyclo ® pad

covers for an extreme shine, final

wax buff and upholstery cleaning.

Use Proshine and Fastcut ® discs for

scratch removal, plexiglass, rust

removal and more.

PERFECT FOR› Final Wax Buff

› Extreme Shine

› Upholstery

› Paint Scratch Removal

› Rust Removal

› Tile and Grout

› Hockey Rinks


Professional results

faster with the new

advanced rubber polymer

technology. With the

dual action of the Cyclo

Polisher you can safely

and effectively remove

paint over spray, water

spots, tree sap, rail dust

and other bonded surface

contaminants from the

surface of automotive

paint, glass, moldings and

plastic. Cyclo Autoscrub

Pads require the use of

CTI Pro Paint Lubrication

& Quick Detail Spray.

· Machine Alternative to Detailing Clay · Long Lasting · Fine and Medium Grades

· 4” PadsAchieve professional results faster with this advanced rubber polymer pad used in lieu of detailing clay. With the dual action of the Cyclo Polisher you can safely and effectively remove paint over spray, water spots, tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Cyclo Autoscrub Pads require the use of CTI Pro Paint Lubrication & Quick Detail Spray. Unlike clay bars, Cyclo Autoscrub Pad cans simply be cleaned with water even if dropped on the ground.

4 inch (100mm), Fine Grade (Blue), package of one PAIR, velcro loop backed (72-320x2)

4 inch (100mm), Medium Grade (Yellow), package of one PAIR, velcro loop backed (72-340x2)

Cyclo’s Nanoskin™ Autoscrub Pads

CTI Pro Paint Care™ Lubricant and Quick Detail Spray

· Advanced Lubrication for Cyclo Autoscrub Pads · A Streak-Free Quick

Detail Spray · Anti-StaticCTI Pro Paint Care Lubricant & Quick Detail Spray works uniquely with

the advanced, rubber-polymer pad technology found on Cyclo Nanoskin Autoscrub Pads and the chemical composition of clay bars. It provides the

necessary slick surface for the pads or clay bar to glide on. It is specially formulated for streak-free surface when used as a spray polish.

32 oz. (84-102)Trigger Spray Head (86-520)

CYCLO’S CLAY ALTERNATIVE

SYSTEM

CYCLO and CTI PRO PAINT CARE are trademarks of Cyclo Toolmakers,

Inc. NANOSKIN and AUTOSCRUB are trademarks of Total Import Solutions, Inc.


RECOMMENDED APPLICATIONS:· Heavy Paint Compound · Paint Scratch

Removal · Heavy Paint DeoxRids your surface of scratches and heavy oxidation. As

with all CTI polishes, use a small amount. Very aggressive compounding polish for use on any surface.

1 Quart (84-192)

Heavy Compounding Gel

Light Compounding LiquidRECOMMENDED APPLICATIONS:

· Light Paint Compound · Light Paint Scratch Removal · Medium Paint Deox

Used for removing hairline scratches and medium oxidation. It does not contain sealants and should be followed with a Cyclo polish

and/or sealant.

1 Gallon (84-171), 16 oz. (84-246)

RECOMMENDED APPLICATIONS:· Paint Swirl Removal · Paint Polish · Paint Light

Scratch Removal · Paint DeoxRemoves swirls, holograms, and other minor defects while adding depth and gloss. The perfect follow-up to our Light Compounding

Liquid. Designed for use on all painted surfaces.

1 Gallon (84-141), 16 oz. (84-146)

RECOMMENDED APPLICATIONS:· Paint Polish · Paint Sealant

This high poly sealant will give your surface up to 6 months of durable protection and brilliant gloss. Shows your paint’s original

new car shine. Use on all painted surfaces.

1 Gallon (84-131), 16 oz. (84-136)

CTI Pro Paint Care™

CTI cleaners and polishes have

been specifically designed for

the action, speed, and weight

of the Cyclo machine. They are

fully compatible with all Genuine

Cyclo pads and provide superior

professional results.

PERFECT FOR› Paint Scratch Removal

› Paint Compound

› Paint Deox

› Paint Correction

› Paint Swirl Removal

› Paint Cobweb Removal

› Extreme Shine

› Paint Sealant

› Paint Protection

RECOMMENDED APPLICATIONS:· Paint Protection · Paint Gloss

This easy to apply creme wax will give your surface up to 6 months of durable protection and brilliant gloss. Shows your

paint’s original new car shine. Use on all painted surfaces.

1 Gallon (84-121), 16 oz. (84-126)

RECOMMENDED APPLICATIONS:· Paint Cleaner · Paint Polish · Paint

Light Scratch RemovalCleans, polishes and protects all at the same time. Removes light

scratches and environmental contaminants. It quickly restores showroom color and brilliance and protects finishes with a brilliant

weather resistant silicone film. Excellent on any painted surface.

1 Gallon (84-141), 16 oz. (84-146)

Polish and Swirl Remover

Protective Sealant

Finishing Wax

CTI 1 Pass Express - All In One



• Aggressive Metal Compound • Metal Deox

• Corrosion Removal

Aggressive rubbing compound for heavily oxidized aluminum and other metals. Removes corrosion, oxidation, and surface film leaving a

hard polished finish.

38 lbs. (84-395), 1 Gallon (84-391), 1 Quart (84-392)

Free Flite™ Cleaner — Polish

Free Flite™ Protective Sealant


• Metal Light Deox • Fine Scratch Removal

• Metal Sealant

Mild deoxidizing agent specially formulated to bond to bare metal. Removes those fine polishing

scratches only seen in direct sunlight. Also leaves a protective coating that prevents further

oxidation.

1 Gallon (84-341), 16 oz. (84-346)

CTI Metal PolishDeoxidize it, clean it, buff it,

protect it, with CTI Metal Polishes.

CTI cleaners and polishes have

been specifically designed for

the action, speed, and weight

of the Cyclo machine. They are

fully compatible with all Genuine

Cyclo pads and provide superior

professional results.

PERFECT FOR› Metal Compound

› Metal Deox

› Corrosion Removal

› Paint Cobweb Removal

› Fine Scratch Removal

› Metal Sealant

› Metal Protection

› Aluminum Wheels

› Aluminum Bumpers

› Airstream Restoration

› Aluminum Pontoons

› Aluminum Toolboxes

Cyclo Toolmakers, Inc., 14320 Longs Peak Court, Longmont, CO 80504 U.S.A. | +1 (970) 535-0100www.cyclotoolmakers.com Copyright © 2000-2014 Cyclo Toolmakers, Inc. All Rights Reserved. CTI-10-033

Extreme Shine

Final Wax Buff

Wax Application

Sealant

Paint Polish

Paint Cleaner

Paint Deoxidation

Paint Compound

Paint Scratch Removal

Plexiglass

Metal Polish/Cleaner

Metal Sealant

Bug Removal

Tile And Grout

Upholstery

Fine Carpets

Durable Carpets

Truck Bed Liners

Ice Hockey Rink

PART NU

MBER CYCLO

GENU

INE ACCESSO

RY COLO

R ATTACHMEN

T

Cyclo Genuine Accessory Guide Maxim

izing the capabilities of your Cyclo Dual Head Orbital Polisher begins w

ithusing genuine Cyclo accessories. Choose from

a wide range of pads and pad covers for polishing, com

pounding,cutti

ng, finishing, and scrubbing. Various brush attachments are also available for cleaning carpet and other surfaces

as delicate as leather and as rough as stone flooring.

APPLICATION

WOOL PADS

Fin

ishin

g P

ad This super�ne pad returns dull painted surfaces to their original show

room shine.

Excellent for applying sealants and removing w

ax. 110 S

eries

120 Series

Wh

ite

Green

Ultra S

oft U

ph

olstery B

rush

(8 mil poly) The brush for delicate surfaces. Each bristle is "�agged", a

technique that splits the bristle ends into multiple �ne tips. Ideal for use on headliners, leather, or m

ore fragile upholstery and natural �ber �ne carpets.

76-810G

ray Bristle

Bo

nn

et/ Velcro

Lig

ht P

olish

ing

Pad

The perrfect pad for light polishing on any surface. Use w

ith wax and polish for a

�ne gloss �nish or to remove sw

irl marks.

115 Series

Blu

eB

on

net/ V

elcro

Bo

nn

et/ Velcro

Cu

tting

Pad

A �rm

, versatile pad that can be used on everything from com

pounding and scratch rem

oval to applying paint cleaners and polishes. Features high performance pre-polym

er foam w

ith low

compressive load de�ection.

135 Series

Yello

wB

on

net/ V

elcro

Co

mp

ou

nd

ing

& P

olish

ing

Pad

An exceptional, all-in-one, cleaning and polishing pad. This high

density pad has the power to rem

ove light scratches and polish the surface. It's the preferred padam

ong top car manufacturers.

145 Series

Oran

ge

Bo

nn

et/ Velcro

Scru

bb

ing

Pad

A true w

orkhorse of a pad. Scrubs away hard to rem

ove materials such as bugs, tar,

and sap. Can also be used as a more aggressive deoxidizer.

160 Series

Yello

w

Yello

w M

ediu

m C

uttin

g W

ool A

wool/acrylic blend w

ith a moderately aggressive texture that is perfect

for reducing signi�cant pits and scratches. Excellent pad for everyday cutting.435 S

eriesY

ellow

Velcro

Micro

fiber Terry P

ad C

over The preferred cover for applying polish and bu�

ng wax. Its sm

all ibers are hooked, w

hich enables them to grab, hold, and rem

ove surface residue. Will leave your surface w

ith a sparkling shine.

73-530V

ariesO

ver Pad

Co

tton

Terry Pad

Co

ver A 100%

cotton terry cover. Perfect for cleaning interior surfaces and for bu�

ng, polishing, and drying exterior surfaces.73-550

Varies

Over P

ad

Soft Carpet Brush (10 mil poly) This brush features m

edium crim

ped bristles for gentle but thorough cleaning. kneads and vibrates loose any soil or foreign m

atter. Perfect for most carpets.

76-830A

qu

a Bristle

Th

readed

Sh

aft

Stan

dard

Carp

et Bru

sh (12 m

il poly) The brush designed for more vigorous cleaning. It is

recomm

ended for �oor pads and more durable carpets.The Standard Carpet Brush is sti�er and less giving

than the Soft Carpet Brush.

76-840W

hite B

ristleT

hread

ed S

haft

Stiff S

crub

Bru

sh (18 m

il poly) Our m

ost aggressive brush. Provides exceptional scrubbing power on

tough surfaces. Used for cleaning tile, stone �oors, and pick-up truck bed liners.

76-870B

lack Bristle

Th

readed

Sh

aft

Cyclo

Pro

Sh

ine™

Ultra�ne cushioned abrasive discs used for rem

oving orange peel and �nescratches from

paint. Also rem

oves �ne scratches from plexiglass. Available in grades of 1500, 2400, 4000,

6000, 8000, and 12000. Used w

ith ProShine Interface Pad (79-920).72-7xx S

eriesV

ariesV

elcro

Fastcu

t™ 600 G

rit Pad

This coarse nylon pad is strong, durable, and speci�cally designed for rough surface areas. Polishes alum

inum diam

ond plate, pitted aluminum

, chrome, even glass. A

lso used to rem

ove puck marks from

the walls of ice hockey rinks.

74-660W

hite

Velcro

Velcro

Micro

fiber S

ued

e Pad

Co

ver An ultra-soft cover used for �nal touches. Rem

oves all surface residue.73-515

Varies

Over P

ad

BRUSHES PAD COVERS FOAM PADS

GENUINEDESIGNED

FOR USE WITH

CYCLO BRAND POLISHERS

Po

lishin

g P

ad A

more aggressive pad than the Light Polishing Pad. The pore density m

akes it perfect for polishing and rem

oving light oxidation. Leaves a stunning shine. The most popular Cyclo pad.

Orig

inal C

yclo C

uttin

g W

oo

l Pad

The preferred multipurpose w

ool/poly pad, used for metal polishing

and paint compounding. Excellent for rem

oving swirl m

arks and light scratches.455 S

eriesN

atural

NANOSKIN DISCS

72-320

72-340

Blu

e

Yello

w

Fin

e Grad

e Au

toscru

b P

ad This patented rubber polym

er technology pad replaces your �ne grade detailing clay. It is designed for use on black or new

ly painted surfaces and all surfaces in cooler weather.

Use w

ith CTI Pro Paint Care™

Lubricant and Quick D

etail Spray.

Med

ium

Grad

e Au

toscru

b P

ad This patented rubber polym

er technology pad replaces your medium

grade detailing clay. It is perfect for surfaces that have m

oderate build-up of contaminants and older

vehicles. Use w

ith CTI Pro Paint Care™

Lubricant and Quick D

etail Spray.V

elcro

Th

readed

Sh

aft

Bo

nn

et/ Velcro

Bo

nn

et/ Velcro

PRODUCT GUIDE - Cyclo...

Documents

Transcript of PRODUCT GUIDE - Cyclo...