Product Guide 2017 - TG Lynes · TGLynes Product Guide 2017 ... Copper Fittings,...
Transcript of Product Guide 2017 - TG Lynes · TGLynes Product Guide 2017 ... Copper Fittings,...
Sales 0208 216 1900 Fax 0845 071 7071
TGLynes Product Guide 2017
[email protected] www.tglynes.co.uk
1
Product Guide 2017
Sales 0208 216 1900 Fax 0845 071 7071 Sales 0208 216 1900 Fax 0845 071 7071
TGLynes Product Guide 2017 TGLynes Product Guide 2017
[email protected] www.tglynes.co.uk [email protected] www.tglynes.co.uk
2 3
Welcome to TGLynes Product Guide.
Within this publication we present a snap shot of the expansive portfolio of products offered by TGLynes in a format that offers not only pictorial representation but includes key features and benefits.
The ranges include the expanding portfolio of quality TGL own brand products along with the industry leading brands in valves, steel and copper tubes and fittings including screwed and welded, solder and brazing, push, press and grooved applications. Also multilayer, composite and plastic plumbing and drainage solutions, support systems and consumables, commercial fans and water heaters, tooling, hire equipment and PPE are stocked to service the requirements of industry demands. Then in the final pages are some relevant conversion tables and contact information.
We strive to supply your expectations with our professional and experienced sales personnel, extensive stock range, dedicated transport and distribution routes and trade counter should you choose to collect from us.
If your requirements are not listed in this publication please do not hesitate in contacting us as our portfolio is continually expanding.
If you require any additional copies of this publication please contact your local representative or the sales office on the number below.
TGLynes Ltd115 Brancroft Way, Brimsdown, Enfield, EN3 7QE
4 TGL Valves, Gauges & Fittings – Ball, Gate, Globe, Swing Check, ‘Y’ type Strainer, Cast Iron, Butterfly, Air Vent and Gauges, Flange Packs, Copper Fittings, Service/Commissioning
6 Valves – Crane, Hattersley, Pegler Yorkshire, Cottom & Preedy, TMV, Nabic, Keraflo Spirax Sarco, Pressure Reducing
8 Valves, Pumps & Meters – Drayton, Cistermister, Actaris, Victaulic, Grundfos
9 Steel Tubes – Plain End, Screwed & Socketed, Grooved, Full, Half & Third Randoms, Self coloured, Galvanised
10 Steel Fittings – Malleable Fittings, Weld, Flanges, Flange Packs, Victaulic, Primofit
11 Dry Riser Installation – Example
12 Copper Tube – Yorkshire, Lawton
13 Fittings – Yorkshire, Conex Banninger, TGL, Victaulic
15 Plastic Systems – +GF+, John Guest, Tecnoplastic, Terrain, Philmac, Talbot, HEP20 and McAlpine
18 Composite Systems – Pegler Yorkshire Henco, Polypipe Terrain Polypress, Tracpipe, Uponor
19 Support Systems & Pipework Products – Strut, Bar & Studding, Bracketry, Q Clamp,Jointing, Lagging, Gauges, Pipeline Equipment, Fire Protection Sundries, Repair Clamps, Saniflo macerators
21 Water Heating – Heatrae Sadia, Santon, Zip, Kingspan, Flamco Expansion Vessels
23 Air Movement – Vent-Axia
24 Heating Recovery & Ducting – Vent-Axia
25 Air Conditioning 26 Consumables – Fixings, Jointings, Paint, Oil, Sealants, Treatments, Pipefreezing, Protection, Hygiene, Lighting
27 Tools – A wide selection of tools and equipment
28 Plant Hire – A wide range of tools, equipment and Protective Wear
32 Tables and Dimensions – Conversion table
35 Location and Contact Information
Terms & Conditions A copy of TGLynes Terms and Conditions are available upon request from our office, your local sales representative or can be downloaded from our website. E&OE subject to our Terms and Conditions
Images The colours of products depicted in this publication are within the constraints of the printing process and are not used for colour matching. All photographs have been used as an approximate representation only and do not necessarily show the product offer.
Sales 0208 216 1900 Fax 0845 071 7071 Sales 0208 216 1900 Fax 0845 071 [email protected] www.tglynes.co.uk [email protected] www.tglynes.co.uk
4 5
TGL Valves, Gauges & FittingsTGL Valves, Gauges & Fittings
TGL 50 Brass Ball Valve• Wras approved • Screwed Bsp Ends • Compression ended available (59BL) • Full Bore • PTFE seats and seals • PN40 up to 2” • Anti Blowout Stem • Temp -20ºC to 130 ºC
TGL 235 Cast Iron Gate Valve• Dimensions to BS5150 • Stainless Steel Stem • Bronze Trim • Non Rising Stem • 16 Bar • –10˚C to +230˚C • 50mm to 200mm
TGL 25D ZR Brass Fixed Orifice Commissioning Valve• BSP Parallel ends • 16 Bar • -10°C to +120°C • EPDM Seat • 1/2” to 2”
Brass Auto Air Vent• 6 bar / 115˚C • WRAS Approved • 15mm & 1/2”
TGL 368 Bronze ‘Y’ Type• Screwed BSP Taper • Bronze Body • Screwed Cap • Standard Screen 0.75mm • PN20 • 1/2” to 2”
TGL 135 Cast Iron Butterfly Valve Lugged & Tapped Type• WRAS approved • ISO Top • EPDM Liner • Stainless Steel Disc • 16 Bar Rated • –10˚C to +110˚C • 2” to 10”
TGL Service Valves• Brass Compression • Chrome Compression • 15mm & 22mm
TGL 384 Bronze Swing Check Valve• Screwed BSP Taper • Bronze Body • Bronze Disc • PN20 • 1/2” to 2”
TGL 185 Cast Iron ‘Y’ Strainer• Flanged PN16 • Drain Plug on the Bonnet • Stainless Steel Screen 1.5mm • –10˚C to +230˚C • 50mm to 150mm
TGL Brass Gate Valves • Kite Marked BS5154 • BSP threaded • 20 bar at 100 ºC • 9 bar at 80 ºC • 1/2 to 2” • L/S Available
TGL Flange Packs • M16 BZP Bolts • BZP Nuts & Washers • 50mm to 150mm
TGL Solder Ring Fittings• 15mm to 54mm • Kitemarked
TGL End Feed Fittings• 10mm to 54mm • Manufactured to EN1254
TGL Compression Fittings• 15mm to 54mm • Special sizes on request • Manufactured to EN1254
TGL 40YL Gas Ball Valve• WRAS approved + EN331 approved • Screwed BSP Ends • Compression ends • Full bore • PN40 up to 2” • Anti Blowout StemTGL
TGL 170 Cast Iron Swing Check Valve• Manufactured to BS EN 12334 (BS5153) • Bronze Trim • 16 Bar • –10˚C to +230˚C • 50mm to 150mm
TGL 27 Meter Station• Screwed BSP • Fixing Orifice with + 5% flow measurement accuracy • Can be closed coupled to a double regulating valve • Supplied with 2 fitted test points • Std, Med, Low, Ultra low and ultra ultra low versions • Working temp -10 ºC to 120 ºC
Thermometers & Gauges For heating & ventilation• Pressure & Altitude • Vertical and Co-Axial Bimetallic • Remote reading • Clip on
Sales 0208 216 1900 Fax 0845 071 7071 Sales 0208 216 1900 Fax 0845 071 [email protected] www.tglynes.co.uk [email protected] www.tglynes.co.uk
6 7
ValvesValves
Cottam & Preedy• The Original & Still the Best • CP961 Multi Isolation Valve • 15mm and 22mm • 1/2” and 3/4” • Saves Energy & Saves Money • Wondervalve
Reliance Tenant Valve• 3/4” and 1” connections • Adjustable Pressure 1.5 to 6 bar • Space Saving • DZR Brass • Ideal for Residential Projects
Spirax Sarco• Steam Traps • AAV • Valves • Pressure Control • Flow Metering
TGL PRV T-103-2012• 1/2” to 2” Available • 22mm Compression • 0.5 to 6 bar static control • Wras approved • 80 ºC max working temp
Hattersley Valves Quality, Reliability and Service assured
• Ball valves • Bronze gate valves • Ductile iron & Cast iron gate valves • Bronze & Cast Iron globe valves • Bronze & brass check valves • Bronze commissioning valves • Balancing valves • Butterfly valves • Radiator valves • Bronze strainers • Compact hook-up • DPCVs
Pegler Yorkshire Valves• Ball valves • Gate valves • Check and Strainer Valves • Commissioning • Service • Ballofix Isolating Ball Valves • Supported by free to use leading software sizing • TMVs • MVSs • TRVs
TGL Thermostatic Mixing Controls• Anti Scald Valves • TMV 2 / TMV 3 • BS EN1111 & BS EN1287 • G3 Compliant • 15mm & 22mm
Crane ValvesCrane Fluid Systems is a leading UK manufacturer of valves, fittings and engineering products for building services applications, offering solutions which provide best value.
Product Range Overview
• Ball valves in bronze, DZR and brass
• Gate, globe and check valves in bronze, DZR, brass, cast iron
• Strainers in bronze, cast iron
• Lugged and wafer style butterfly valves in bronze and cast iron
• Dominator – flow management
• Static and automatic balancing valves in bronze and cast iron
• Handwheel, lockshield and thermostatic control radiator valves in bronze with various finishes
• DPCVs
• Public heath range
NABICSafety & Pressure Relief Valves Pressure Relief valves
• Resilient PTFE seating design • High degree of seat tightness • Suitable for liquids and gases • Top guided working parts • Pressure tight on discharge side • Designed and tested to BS 6759 • Flanged inlets available • RPZ Anti-pollution valves • Pipe interrupters • TGLynes Setting Bench
Keraflo The Aylesbury Float Valve Range• Ideal for pumped systems • Reduces Legionellae risk • No valve bounce • No dribble • No water hammer • WRAS Approved
Sales 0208 216 1900 Fax 0845 071 7071 Sales 0208 216 1900 Fax 0845 071 [email protected] www.tglynes.co.uk [email protected] www.tglynes.co.uk
8 9
Steel TubesValves, Pumps & Meters
PumpsGrundfos • Selectric • Single Head • Twin Head • Vari-Speed • Multi-Speed • Pump Solutions
Grinnell• Ball Valve • Check Valve • Butterfly Valve • Triple Service Valve • Flow Regulating Valve • Strainers
Spirotech Air & Dirt Separator• 2” to 12” Available • 5 year guarantee • High powered Magnet • Access to Full spirotech product range
Steel Tube• Plain End • Screwed & Socketed • Grooved • Full, Half and Third Randoms • Self coloured upon request
API Schedule Tube and Schedule 20 8” to 12” available upon request. For support systems and pipework products see page 18.
Galvanised Steel Tube• Plain End • Screwed & Socketed • Grooved • Full, Half and Third Randoms
ValvesDrayton TRV4 • Liquid Sensor • Frost Protection • Positive Shut-off
Draincocks • 15mm • 1/2”-1”
Stopcocks • 15mm to 28mm • 1/2”-2” BS1010 • WH 1/2”-3” BS1010
Testing • Test Points • Test Plugs
Floats • Plastic • Copper
Comparison of Outside Diameter Tolerance
EN10255 BS1387 EN10255 & BS1387 EN10255 Type L
Specified Outside Diameter Nominal Diameter Thread Designation
mm mm inches mm min mm max
10.2 6 1/8
13.5 8 1/4 13.2 13.9
17.2 10 3/8 16.7 17.4
21.3 15 1/2 21.0 21.7
26.9 20 3/4 26.4 27.1
33.7 25 1 33.2 34.0
42.4 32 1 1/4 41.9 42.7
48.3 40 11/2 47.8 48.6
60.3 50 2 59.6 60.7
76.1 65 2 1/2 75.2 76.0
88.9 80 3 87.9 88.7
101.6 - 3 1/2 100.3 101.2
114.3 100 4 113.0 113.9
139.7 125 5 138.5 140.8
165.1 150 6 163.9 166.5
Sales 0208 216 1900 Fax 0845 071 7071 Sales 0208 216 1900 Fax 0845 071 [email protected] www.tglynes.co.uk [email protected] www.tglynes.co.uk
10 11
Dry Riser InstallationSteel Fittings
Weld Fittings
Malleable Fittings
Primofit
BS1965 HVYBS1640 • Butt Weld Fittings • 1/2” to 12”
Welding equipment for hire
HWT Tubular
BS EN 10242 • 1/8” to 6” • Hot or cold water supply • Heating, water & steam • 300˚C/20 barHWT
• End loaded compression system for steel pipe • Ideal for use within the heating, ventilation, air conditioning industries • FPM seals • No special tooling requiredWeld
Flanges
• Screwed • Slip-on Weld • Weld neck • Plate • Blank • Imperial BS10 • Metric BS4504
TGL Flange Packs • M16 BZP Bolts • BZP Nuts & Washers • 50mm to 150mm
ARV
Grooved to Screwed barrel nipple
Dry Riser Gate valve
100mm Grooved tube
Dry Riser Gate valve Screwed Inlet
Galv socket
Pitcher tee
100mm rigid coupling LPC and FM approved
Vertical inlet box Horizontal inlet box Vertical outlet box Architrave 30 all-round. Also available in stainless steel
90˚ long radius elbow LPC approved, or 90˚ standard radius elbow LPC approved
Flange adapter
2-Way Inlet Breeching Valve
DV
Dry Riser Inlet
Grinnell• 2” to 8” from Stock • Time saving Solution • No hot works • Grooved Valves available • 10 year limited warranty
Sales 0208 216 1900 Fax 0845 071 7071 Sales 0208 216 1900 Fax 0845 071 [email protected] www.tglynes.co.uk [email protected] www.tglynes.co.uk
12 13
FittingsCopper Tube
Lawton Copper Tube
Lawton Copper Tube • 15mm to 159mm • 3 or 6 mtr lengths • Chrome Plated • EN1057
Typical Applications • Drinking Water • Central Heating • Sanitation • Hot and cold water • Gas • Various engineering
Yorkshire Copper Tube • Yorkex & Kuterlon • Half-hard & Hard • 15mm to 159mm • EN1057 • 6 or 3 mtr lengths • Minibore or Commercial Coils • Chrome Plated
Yorkshire Copper Tube
Yorkshire Fittings• Potable integral solder ring fittings • YPS & YP Fittings (6mm–108mm) • Endex (67mm–159mm) • Waste (28–54mm) • BS EN 1057
Yorkshire Tectite Advance• The carbon steel push-fit system • 15mm to 54mm • Heating & chilled water applications • Electrical continuity
Yorkshire Tectite Pro• Push Fit • DZR • Demountable • Electrical Continuity • 15mm to 54m
Press Fit SolutionsYorkshire Copper XPress • The copper press-fit system • 15mm to 108mm • 25 year guarantee • Tools & Jaws
Yorkshire Carbon XPress • The carbon steel press-fit system • 15mm to 108mm • 10 year guarantee • Heating or chilled water applications • Tools & Jaws • Yorkshire Solar Xpress • Yorkshire Stainless Xpress
Sundries• Brass BSP Fittings • Bronze Fittings
Sales 0208 216 1900 Fax 0845 071 7071 Sales 0208 216 1900 Fax 0845 071 [email protected] www.tglynes.co.uk [email protected] www.tglynes.co.uk
14 15
Plastic SystemsFittings
Conex Banninger >B< Press range• Press fitting system • 15mm to 108mm • Tooling available to purchase or hire • Copper • Carbon
Ecofit• Chilled Applications Alternative to copper • -50 to 60 ºC • 20mm to 1200mm • Polyethylene • Butt weld and electrofusion
Coolfit Family• Chilled Applications • 0 to 60 ºC • 32mm to 140m • Electrofusion jointing method • Coolfit , coolfit lite and coolfit plus also available
AquasystemThe PP-R piping system for hot and cold water and heating • Socket fusion or Electrofusion • 20mm to 125mm
InstaflexFlexible polybutylene pipe means fast economic installations even in awkward shaped and curved buildings. • Flexible • Electrofusion, socket fusion or compression fittings • 16mm to 110mm
Chrome Plated Compression Fittings• 15mm to 54mm • Waste and Service • Fittings and Traps
Conex Banninger• Conex Compression • Triflow Solder Ring • Delcop Endfeed • Delbraze • Waste
TGL Solder Ring Fittings• 15mm to 54mm • Kitemarked
TGL End Feed Fittings• 10mm to 54mm • Manufactured to EN1254
TGL Compression Fittings• 15mm to 54mm • Special sizes on request • Manufactured to EN1254
Sales 0208 216 1900 Fax 0845 071 7071 Sales 0208 216 1900 Fax 0845 071 [email protected] www.tglynes.co.uk [email protected] www.tglynes.co.uk
16 17
Plastic SystemsPlastic Systems
Terrain – soil and wasteHaving pioneered the development of solvent-weld systems, Terrain PVC Soil and Waste products represent the industry benchmark for quality, installation, flexibility and product innovation.
• Available as Pushfit or Solvent Weld • Soil – 82mm, 110mm & 160mm • Waste – 32mm, 40mm & 50mm • Overflow • Great range of innovative products • Space saving products due to the smaller physical size of the fittings • Quick & Easy to install • Comprehensive range of fittings and adaptors available
Philmac• Plastic mechanical compression fittings • Designed for both mains and LP Gas • 20mm to 63mm
JG SpeedfitPlastic push-fit system suitable for the plumbing of hot and cold water services and heating applications.
• Push fit technology • Easy to disconnect without tools • Twist and lock secure connections • WRAS Approved
Mcalpine• Multifit fittings • WC Connectors • Traps – bottle, bath, shower , P-Traps , adjustable inlet • Chrome Plated
Talbot• MDPE Pipe & Fittings for water pipes • Push fit fittings • 16 bar pressure at 20˚C
HEP20The next generation in plastic push-fit plumbing
• 10mm to 28mm pipe and fittings • Demountable
MDPE Pipe• Blue Pipe (20mm–63mm) • 25mtr–100mtr Coils • Yellow Pipe (20mm–63mm) • 50mtr Coils
Terrain Fuze Drainage
KEY FEATURES & BENEFITS: • Fully accredited • Unrivalled installation options to match any project • Quick and easy installation • Light weight and easy to handle • Fabrication Available • Suitable for all types of commercial and domestic installations
Terrain DB12 Acoustic Terrain engineered acoustic system dB12 offers a solution to the problem of noise & vibration in soil & waste pipework. Terrain Acoustic dB12 is an easy to install, triple layer pipe system with specially developed co-polymer polypropylene layers & acoustically engineered fittings that effectively dampen both airborne noise & sound transmitted through the building structure, it is especially well suited to large, multi-occupancy buildings such as apartment developments, student accommodation & hotels.
KEY FEATURES & BENEFITS: • Excellent sound proofing characteristics • Elevated mechanical and corrosion resistance • Highly resistant to impact, even at low temperature • Working temperatures from 0ºC-95ºC
Sales 0208 216 1900 Fax 0845 071 7071 Sales 0208 216 1900 Fax 0845 071 [email protected] www.tglynes.co.uk [email protected] www.tglynes.co.uk
18 19
Composite Pipe Systems Support Systems & Pipework Products
Pipework ProductsPhenolic & wood blocks
Uponor Leading the way in the innovation of• Flexible plumbing • Product applications • Risers • Modular pods • Distribution pipework • Domestic services • Commercial buildings • Underfloor Heating • Multi floor developments
RTM• 360 ºC window • Push and Click fitting • 12mm to 32mm • Suitable for MLCP and Pex Pipe
STRUTSupport Systems The original metal framing system • Hot dipped galvanised channel • 41mm x 41mm x 2.5mm • 41mm x 21mm x 2.5mm • Angle Brackets • Nuts • Clamps • Studding • Channel • Angle Iron • Flat Bar
Studding Channel Angle Iron Flat Bar
Pre-Insulated• Sizes 25mm to 110mm • Colour coded inner insulation, which clearly & quickly illustrates flow & return • Inside & Outside of buildings • Suitable for hot water up to 95˚C
Gas PipeTracpipe • Flexible Gas Piping • Corrugated Stainless steel • AutoFlare Fittings Gas Pipe • 12mm to 50mm • Gas line replacement kits in 5, 10 & 15 mtr. • Solar pipe available
Q&E• PPSU and Brass fittings • 16mm to 110mm available • Expansion Shrink fit Connection • No mechanical parts
Sales 0208 216 1900 Fax 0845 071 7071 Sales 0208 216 1900 Fax 0845 071 [email protected] www.tglynes.co.uk [email protected] www.tglynes.co.uk
20 21
Water HeatingSupport Systems & Pipework Products
Bracketry• M/I Black • M/I Galvanised • Brass • Rubber Lined • Steel • Studding
Heatrae SadiaSupreme
• Instant Boiling Water Dispenser • 2.5 to 40 litre capacity • From 170 cups per hour • Available in White or Satin Chrome
Streamline
• Point of Use • 7 & 10 litre capacity • 1.0 or 3.0 kW • Thermoplastic spout or valve or unit only
Multipoint
• Unvented water heater • Fitted temperature & pressure relief valve • 10, 15, 30 & 50 litre capacity • Range of accessories available
Pipeline Equipment• Bellows • Pump Connectors • Expansion Joints • Dosing Pots • Separators • Heating Pumps • Tap Hoses
FBM
• Storage water heater • 25 to 125 litre capacity • Wall mounted • White enamelled steel
Jointing• Nuts, Bolts, Washers • Joint Rings • Insertion & Sheeting • Flange Packs
Dry Risers• Gate Valves • Breeching Valves • Inlet Cabinets • Grooved Pipe • Grooved Fittings
Lagging• Armaflex • Bright H&V • Denso • Self-seal • Bags of 15mtrs – 6mm to 28mm
Gauges• TGL Thermometers • TGL Presuure • TGL Altitude • Pre-test certificated available • ¼” and 3/8” connections
Repair Clamps – UPE• Stainless Steel • 15mm to 115mm • Quick & easy to install • For Rigid water or Gas pipes • Can be installed without shutting down the mains
Saniflo• Macerators • Pumps • Inclusive products • Professional Range • Add extra facilities with ease
Megaflo
• Unvented water heater • High pressure flow • 70 to 300 litre capacity • To 25 bar • BBA, WRAS, BEAB & CE approved
SantonPremierPlus
• Direct & Indirect Unvented water heating • Duplex stainless steel construction • 100 to 300 litre capacity • Direct or Indirect models • 50mm of cfc-free foam insulation
Sales 0208 216 1900 Fax 0845 071 7071 Sales 0208 216 1900 Fax 0845 071 [email protected] www.tglynes.co.uk [email protected] www.tglynes.co.uk
22 23
Air MovementWater Heating
ZipHydroTap
• Saves time • 40% more energy efficient than a kettle • No more bottled water • Healthier drinks • Two sizes – up to 50 users & up to 75 • Programmable energy saving modes
Vent-AxiaIndustrial Stockists • Commercial Stockists • Residential Stockists Lo-Carbon variants available
TX Fans
• Extract/Intake fans in 4 sizes • Size 6”, 7”, 9” and 12” • Patented electronic shutter system ensures quiet trouble free operation • Shutter open/fan ‘Off’ mode • Low sound levels • Easy fit connector Top Socket, standard on all models
ACM
• Multiple Speed Settings • Designed for Ease of Installation • Timer version available • Install at any angle • IP44 rated
Solo Plus Fans
• Built-in washable filter feature. • Meets the Building Regulation (DºCument F) requirements for domestic bathrooms and toilets • IPX4 rated • Flush or surface mountable • Adjustable rear or side exit spigot • Extremely low sound levelsTurboprop
T- Series
• Extract/intake in 4 sizes:6”,7”,9” and 12” • Wall, Window, Roof and panel mounting Models available • Shutter Open/Fan off mode • Low sound levels • Easy fit connector top socket, standard on all models
Silhouette Fans
• 12mm stylish ultra low profile grille • Downstream airflow guide vanes for improved pressure development • Ball bearing motors for vertical or horizontal application • Wall kit design ensures installed performance to meet Building Regulation (Document F) requirements • Low power consumption
Sceptre – Plate Fan
• Standard thermal overload protection • Can be wired for reverse running • Motor insulation Class F
Eurofoil Range
• Air volumes up to 12m3 • Motor insulation Class F • Hot Spot protection • Tough epoxy paint finish
Expansion Vessels• Flamco AirFix P • Max working pressure 10bar • Max vessel temperature 100˚C – 750l + above 50˚C • WRAS approved
Aquapoint III
• Unvented water heaters • Glass lined steel tank for economy • Tested to 12 bar • 5–100 litres capacity • Oversink & undersink (5–15 litres) • Full installation kit 30–100 litres
Varipoint
• Unvented water heaters • High quality copper tank for long life • Tested to 16 bar • 10–100 litre capacity • Factory fitted P&T valve • Oversink & undersink (10 & 15 litres)
Hydroboil & Hydroboil Plus
• Delivers water within 1˚C of boiling • Pre-heats incoming water • Twin chamber technology • Stainless Steel tanks • 1.5–40 litre capacity • Programmable energy saving modes (Plus)
RCH
• Storage water heater to multiple outlets • Fully WRAS compliant • 25–100 litre capacity • Simple to install, operate & maintain
AquaFlo
• Stainless Steel unvented water heaters • 10 year warranty on cylinder • Operating pressure of 3.5 bar • High performance coil • Direct & Indirect models • 150–250 litre capacity
Sales 0208 216 1900 Fax 0845 071 7071 Sales 0208 216 1900 Fax 0845 071 [email protected] www.tglynes.co.uk [email protected] www.tglynes.co.uk
24 25
Air ConditioningHeating Recovery & Ducting
Flexible Ducting
• Insulated ducting should be used when duct passes through an unheated area • Minimized heat loss when used with Heat Recovery fans • Available in 6 diameters • 10m length • An additional benefit is that thermally insulated duct offers some measure of acoustic attenuation • Fire Rating: When assessed against the integrity criterion of BS476: Part 20; 1987, the ducting is capable of providing in excess of 25 minutes integrity from inside to outside.
Ventaxia and Daikin UK have established a supply agreement to deliver the Daikin Altherma range of renewable energy heat pump systems as an extension to Vent-Axia’s product portfolio.
Vent-AxiaFlat Rigid Plastic Ducting
• Rigid Ducting • Light non-corroding rigid PVC for fast trouble free installation available in 3 sizes to suit installation and site requirements
Heating Recovery
HR200WK • Single room domestic heat recovery ventilation unit • 3 speed motor • Integral washable filter • Up to 75% heat recovery • Saves energy – controls condensation • Low noise
HR300 • Designed for continuous operation, providing up to 70% heat recovery • Controls condensation and eliminates mould • Speed controllable • Quiet operation • Washable filters
Lo-Carbon Sentinel Kinetic Range • Mechanical ventilation with heat recovery • Up to 92% heat recovery whilst controlling condensation • Programmable summer bypass • Light-weight for easy installation • Plug and play controls
tglynes.co.uk
Your one stop shop for all air-conditioning and refrigeration installation materials
CALL NOW0208 216 1900
The products we stock, o�er a complete solution:
TG LYNES, 115 Brancroft Way, Brimsdown, Enfield, Middlesex, EN3 7QE Phone: 0208 216 1900Email: [email protected]
Support Systems & Bracketry
Containment Equipment
Refrigeration Pipes
Condensate Removal Pumps & Accessories
Condensate Removal Pipework
Electrical supply, control cables & accessories
Installation toolsRefrigeration insulation
Sales 0208 216 1900 Fax 0845 071 7071 Sales 0208 216 1900 Fax 0845 071 [email protected] www.tglynes.co.uk [email protected] www.tglynes.co.uk
26 27
ToolsConsumables
Fixings• Fischer • Rawl • SDS Drill Bits • Screws • Hilti Anchors • Presto • Stranglehold
Tools• Monument • Screwdrivers • Rivets • Spanners • Sockets
• Spirit Levels • Hilmor Benders • Transformers
• Pipe Freezers • Ladders • Access Towers
• Ridgid Hand Tools • Plant • Rothenburger • Rems
Pipefreezing• Arctic Spray • Record
• Bosch • Press Tools
• Pipe preperation • System Testing • Power Flushing
• Files • Drilling • Cutting
Power Tools• Comprehensive Ranges • Market Leading Brands
• Sump Pump • All enquiries welcome
Jointings• Welding Rods • Brazing Rods • Flux • Solder • PTFE • Hemp • Stag • Loctite • Mapp Gas
Protection & Hygiene• Hand Hygiene • Protective Equipment • Footware • High Vis
Paint, Oil, Sealants• Threading Oil • Cutting Compounds • Yellow Ochre Paint • Red Oxide Paint • Thinners • Paint Brushes • WD40 • Galvafroid • Sealants
Lighting & Extension Leads• Site Lighting • Extension Leads • Inspection Lamps • Torches • Batteries
Treatments• Fernox • Drain Cleaner
Consumables• Grinding Discs • Fire Cement • Tape • Hoses • Hose Pipes • Clips • Washers • Bag of Rags
Sales 0208 216 1900 Fax 0845 071 [email protected] www.tglynes.co.uk
28 29
Kg PPE DescriptionDrilling Kango Extension Arms1 1,2,3,4,6-K1 Extension Arm 10" K taper
1 1,2,3,4,6-K1 Extension Arm 16" K taper
1 1,2,3,4,6-K1 Extension Arm 22" K taper
Welding /Cutting /Purging16 5,7,8,9 MMA Inverter Welder 160A 240/110v c/w 5m lead set
26 5,7,8,9 MMA Inverter Welder 250A 415v c/w 5m lead set
86 5,7,8,9 Welder Generator 200 Amp
10 2 Welding Lead Extension Set 10m (35mm)
130 2,9 Bottle Cage
9 5,6,8.9 Portapack Oxy/Acet Welding and Cutting Kit
9 5,6,8.9 Portapack Oxy/Acet Lead Burning Kit
11 5,6,8.9 Saffire Heavy Duty Welding and Cutting Kit
10 1,2,9 Fusion Welding HDPE
Fusion Welding & Butt Welding for GF Aquasystem
7 1,2 Nitrogen Purging Kit 150psi max
6 1,2 Fire Extinguishers - Foam, Powder or CO2
9 2 Welding Screen 6'x6' frame green
Electric Cutting Eqpt21 1,2,3,4,6-K1 Ridgid 14" Chop Saw 110v (580) c/w wrench
21 1,2,3,4,6-K1 Ridgid 14" Dry Cut Saw 590L
10 1,2,3,4,6-K1 Ridgid Reciprocating Saw 550-1
5 1,2,3,4,6-K1 Makita Reciprocating Saw
5 1,2,3,4,6-K1 Bosch Cordless reciprocating Saw- Battery operated
10 1,2,3,4,6-K1 Victaulic VCT200 Dry Cut (blades purchased seperately)
Grinders 3 1,2,3,4,6-K1 Angle Grinder 4 1/2" 110v c/w wrench
7 1,2,3,4,6-K1 Angle Grinder 9" 110v c/w wrench
Electrical Equipment2 1,2 Extension Lead 110v 16A 50ft 2.5mm
13 1,2 240 / 110v Transformer 2.0kva 16A Outlet
18 1,2 240 / 110v Transformer 3.0kva 2 x 16A Outlut
18 1,2 240 / 110v Transformer 3.0kva 32A Outlut
36 1,2 240 / 110v Transformer 5.0Kva 2x 16A,1x32A Outlet
87 1,2 240 / 110v Site Dist. Transformer 10kva 4 x 16A 2 x 32A
68 1,2 415 / 110v Site Dist. Transformer 10kva 4 x 16A 2 x 32A
2 1,3 Extension Lead 110v 32A 50 Ft 2.5mm
5 1,3 25 mtr Extension Drum 110v
Fume Extraction12 1,2 Fume extractor Elite 10"
3 1,2 Flexible Ducting 10" x 5m
5 1,2 Flexible Ducting 10" x 10m
Gas Bottles18 Hire CO2 14lb (6.35kg)
2 Gas Sale CO2 14lb (6.35kg)
24 Hire CO2 20lb (9kg)
2 Gas Sale CO2 20lb (9kg)
62 Hire CO2 50lb (22kg)
2 Gas Sale CO2 50lb (22kg)
12 2 Double Bottle Trolley Large
8 2 Double Bottle Trolley Small
XPRESS (15-54mm)21 1 XPress Cordless Tool ECO1 15-35mm Cu
c/w charger / 2 x batteries / case
21 1 XPress Tool EFP2 110v 15-35mm Cu
1 XPress large collar set 42-54mm
Plant HirePlant Hire
HIRE RATESAll Hire rates charged at a minimum of one week, thereafter on a daily basis. Equipment collected and returned to our trade counter will be charged at the discretion of the Company.
FREE NEXT DAY DELIVERY & COLLECTION throughout London and the surrounding Counties. All plant is supplied with relevant instructions and tested before each hire. All equipment 110v unless stated.
SAFETY GUIDANCE Alongside each plant description in the list are P.P.E. numbers. The numbered guide right will assist in the correct selection of Personal Protective Equipment (P.P.E.) of our hire products.
NB: These are for guidance only and therefore NOT a substitute for your own risk assessments.
P.P.E. 1. Safety Goggles EN166 2. Canadian Rigger Gloves 3. Dust Mask FFP2 (fine dusts, oil & water based mists) 4. Ear Plugs / Defenders EN352-2 5. Welding Gauntlets 6. Welding Goggles EN 169 7. Welding Mask 8. Welding Respirator FFP2S 9. Safety Footwear 10. Full Body Harness 11. Safety Helmet K1. Safety Kit – Canadian Riggers / FFP2 Respirator / Safety Goggles and Ear Plugs.
Kg PPE DescriptionBenches / Vices32 1,2 Engineers Vice 6"
68 1,2 Metal workbench c/w 4" Vice - Record
68 1,2 Metal workbench c/w 8" Vice - Record
28 1,2 Wooden Top Workbench 1000x700x30mm (inc chain vice up to 4")
26 1,2 Ridgid T/Screw Stand Chain Vice 560 ( Horse)
22 1,2 Ridge Tri-Stand 460 c/w 4" chain Vice
1,2 Heavy Duty Pipe stand for Welding
1,2 Ordinary Pipe stand for Welding
Kg PPE DescriptionBpress Jaws 1 1 Bpress Jaws 15mm
1 1 Bpress Jaws 22mm
1 1 Bpress Jaws 28mm
1 1 Bpress Jaws 35mm
1 1 Bpress Jaws 42mm - 54mm
Kg PPE DescriptionDehumidifiers66 2 Dehumidifier
Benders83 2,9 Hydraulic Bender Kit 1/2"-2" BSP (Staffa)
196 2,9 Hydraulic Bender Kit 1/2"-3" BSP (Staffa)
30 2,9 Manual Bender Kit/Stand Mounted 15-42mm Cu
23 2,9 Manual Bender Kit/Stand Mounted 20-25mm Conduit
26 2,9 Manual Bender Kit/Stand Mounted 20-32mm Conduit
Drain Tools5 1,2 Drain rod set 30Ft c/w 10 rods/plunger/cutter/worm
5 1,2 Rems CamScope 16mm
2 1,2 Rems CamScope 9mm
Rems CamScope Extension cable
Multi Purpose Jaws1 1 Press Tongs 15mm
1 1 Press Tongs 22mm
1 1 Press Tongs 28mm
1 1 Press Tongs 35mm
1 1 Press Tongs 42mm
1 1 Press Tongs 54mm
Uponor1 1 992100 MLCP Pressing Jaws 16mm (UP75 & UP50L)
1 1 994100 MLCP Pressing Jaws 20mm (UP75 & UP50L)
1 1 995100 MLCP Pressing Jaws 25mm (UP75 & UP50L)
1 1 996100 MLCP Pressing Jaws 32mm (UP75 & UP50L)
1 1 997100 MLCP Pressing Jaws 40mm (UP75 & UP50L)
1 1 998100 MLCP Pressing Jaws 50mm (UP75 & UP50L)
1 1 799300 MLCP Pressing Jaws 63mm (UP75)
1 1 799400 MLCP Pressing Jaws 75mm (UP75)
1 1 MLCP Pressing Jaws 90mm (UP75) inc adaptors
1 1 MLCP Pressing Jaws 110mm (UP75) inc adaptors
Drills5 1,2,3,4-K1 Bosch 2 speed / Hilti SR16 1/2" 110v
6 1,2,3,4-K1 Hammer Drill 110v
6 1,2,3,4-K1 Hammer Drill 110v
9 1,2,3,4-K2 Makita SMAC 32C
11 1,2,3,4-K1 Combination Hammer Drill 110v
7 1,2,3,4-K1 Makita Angle Drill 8046 110v
9 1,2,3,4-K1 Battery Drill Heavy Duty Hilti TE2A / Bosch
9 1,2,3,4-K2 Magnetic Drill 110V - 50mm capacity
Diamond Core bits1 1,2,3,4,6-K1 Diamond Core Bit 22mm
1 1,2,3,4,6-K1 Diamond Core Bit 28mm
1 1,2,3,4,6-K1 Diamond Core Bit 38mm
1 1,2,3,4,6-K1 Diamond Core Bit 48mm
1 1,2,3,4,6-K1 Diamond Core Bit 52mm
1 1,2,3,4,6-K1 Diamond Core Bit 65mm
1 1,2,3,4,6-K1 Diamond Core Bit 78mm
1 1,2,3,4,6-K1 Diamond Core Bit 91mm
1 1,2,3,4,6-K1 Diamond Core Bit 117mm
Drilling Hammer bits1 1,2,3,4,6-K1 Hammer bit K taper 25 x 460 x 410mm
1 1,2,3,4,6-K1 Hammer bit K taper 28 x 300 x 250mm
1 1,2,3,4,6-K1 Hammer bit K taper 30 x 460 x 410mm
1 1,2,3,4,6-K1 Hammer bit K taper 32 x 460 x 410mm
1 1,2,3,4,6-K1 Hammer bit K taper 36 x 460 x 410mm
1 1,2,3,4,6-K1 Hammer bit K taper 38 x 460 x 410mm
Drilling Hilti bits1 1,2,3,4,6-K1 Point bit
1 1,2,3,4,6-K1 Chisel bit
1 1,2,3,4,6-K1 Bolster bit 2"
1 1,2,3,4,6-K1 Bolster bit 3"
Drilling Core bits1 1,2,3,4,6-K1 Core Drill J taper 50mm c/w pilot drill and taper adaptor
1 1,2,3,4,6-K1 Core Drill J taper 60mm c/w pilot drill and taper adaptor
1 1,2,3,4,6-K1 Core Drill J taper 65mm c/w pilot drill and taper adaptor
1 1,2,3,4,6-K1 Core Drill J taper 70mm c/w pilot drill and taper adaptor
1 1,2,3,4,6-K1 Core Drill J taper 75mm c/w pilot drill and taper adaptor
1 1,2,3,4,6-K1 Core Drill J taper 80mm c/w pilot drill and taper adaptor
1 1,2,3,4,6-K1 Core Drill J taper 90mm c/w pilot drill and taper adaptor
1 1,2,3,4,6-K1 Core Drill J taper 100mm c/w pilot drill and taper adaptor
1 1,2,3,4,6-K1 Core Drill J taper 115mm c/w pilot drill and taper adaptor
1 1,2,3,4,6-K1 Core Drill J taper 125mm c/w pilot drill and taper adaptor
Drills Kango20 1,2,3,4,6-K1 Kango Heavy Duty Hammer Drill SDS 110v
20 1,2,3,4,6-K1 Bosch Combination Hammer Drill 110v
Compressors 20 1,2 3 cfm Compressor c/w hose 115 psi max
36 1,2 9 cfm Compressor c/w hose 150 psi max
Copper Crimping 9 1 Universal Press Cordless Tool c/w charger / 2 x batteries / case
9 1 Mini Press Tool 15mm to 32mm
Sales 0208 216 1900 Fax 0845 071 7071 Sales 0208 216 1900 Fax 0845 071 [email protected] www.tglynes.co.uk [email protected] www.tglynes.co.uk
30 31
Plant HirePlant Hire
Kg PPE DescriptionLighting Equipment20 2 Plasterers Uplighter 2ft Triphosphorous tube 110v -36w
20 2 Plasterers Uplighter 2ft Triphosphorous tube 110v -18w - Removeable
20 2 Plasterers Uplighter 4ft Triphosphorous tube 110v -18w
2 1,2 Hand Held 110v Lead Light
Miscellaneous95 1,2 Site Box Heavy Duty 4 x2 x2 ft c/w key
95 1,2 Site Box Heavy Duty 4 x2 x2 ft c/w key with Casters
100 1,2 Cable Jack ( 2 Stands / 1 Bar )
73 2,9 Flat Bed Bogey 100kg
8 2 Expandable Safety Barrier 3m (2 req per machine)
12 1 Vacuum Cleaner wet / dry 110v
5 2 Diesel Rotary Hand pump
2 1 Cobra Lock & Chain
30 2,9 Pallet Truck
200 2,9 High Lift Pallet Truck
9 2,9 Pipe Bogey
4 2,9 Sack Truck
Pipe Freezing24 1 Electric Freezer Kit 110v 8 - 35mm
24 1 Electric Freezer Kit 110v 8 - 42mm
25 1 Electric Freezer Kit 110v 8 - 60mm
3 1,2 Jetfreeze Kit 15 - 22mm Copper
3 1,2 Jetfreeze Kit 22 - 42mm Copper
3 1,2 Jetfreeze Kit 42 - 80mm Copper
3 1,2 Jetfreeze Kit 80 - 100mm Copper
3 1,2 Eskimo Kit 1/8" to 2"
Pipe Grooving89 1,2,4,9-K1 Ridgid Rollgroover 2 -6" c/w 918-1 groover and 300 Drive
89 1,2,4,9-K1 Ridgid Rollgroover 8-12" c/w 918-1 groover and 300 Drive
11 1,2,4,9-K1 Rigid 915 Insitu Rollgroover 2 -12"
15 1,2,4,9-K1 Ridgid 916 Portable Rollgroover 1 ¼ - 6"
8 1,2,4,9-K1 Victaulic portable hand grooving machine VE12
10 1,2,4,9-K1 Victaulic portable hand grooving machine VE26C
13 1,2,4,9-K1 Victaulic portable hand grooving machine VE46
Pipe Preperation4 1,2,9 Roll Pipecutter 1/8 - 2" 1 wheel (Record 202)(Ridgid2-A)
9 1,2,9 Roll Pipecutter 2 - 4" 1 wheel (Record 204(Ridgid 4-S)
9 1,2,9 Roll Pipecutter 2 1/2 - 4" 3 wheel (Record 104)
12 1,2,9 Roll Pipecutter 4 - 6" 1 wheel (Ridgid 6-S)(Record 105)
2 1,2,9 Copper cutter 6 - 66mm
61 1,2,9 Ridgid 258 power pipe cutter 2 1/2-8" c/w 110v drive unit and 2 pipe supports
19 1,2,9 REMS Centro Pipe Cutter for Copper, Carbon and Steel
1 2 Copper Tube Setting Tool 76mm
1 2 Copper Tube Setting Tool 108mm
33 1,2,9 Ridgid Hole Cutter HC450 110v holes to 4 3/4"
33 1,2,9 Victaulic Hole Cutter 110v 15 - 114mm
7 1,2,9 Soil Pipe Cutter Record 45 2 - 6"
11 1,2,9 Soil Pipe Snap Cutter Ridgid 2 - 6"
Kg PPE DescriptionGas Bottles15 Hire Acetylene Small (M)
2 Gas Sale Acetylene Small (M)
45 Hire Acetylene Medium (Y)
2 Gas Sale Acetylene Medium (Y)
91 Hire Acetylene Large (F)
2 Gas Sale Acetylene Large (F)
19 Hire Oxygen Small (X)
2 Gas Sale Oxygen Small (X)
45 Hire Oxygen Medium (J)
2 Gas Sale Oxygen Medium (J)
74 Hire Oxygen Large (W)
2 Gas Sale Oxygen Large (W)
19 Hire Nitrogen Small (X)
2 Gas Sale Nitrogen Small (X)
74 Hire Nitrogen Large (W)
2 Gas Sale Nitrogen Large (W)
74 Hire Argoshield Universal Large (W)
2 Gas Sale Argoshield Large (W)
Hand Tools3 1 Jigsaw 2 speed 110v
3 1 Nibbler Light Duty (2.0mm max) 110v
3 1 Nibbler Heavy Duty (3.5mm max) 110v
5 2 Crimping Tool 16 - 95mm- Electrical
6 2 Chain Wrench 18"
5 2 Chain Wrench 24"
8 2 Chain Wrench 36"
12 2 Chain Wrench 48"
3 2 Stillson Wrench 18"
5 2 Stillson Wrench 24"
9 2 Stillson Wrench 36"
17 2 Stillson Wrench 48"
5.7 2 Ridgid Threaded Rod Cutter 1390M (10mm studding)
0.2 2 Ridgid Threaded Rod Cutter 1390M 6mm jaw set
0.2 2 Ridgid Threaded Rod Cutter 1390M 8mm jaw set
Ladders14 10 Aluminium Double 10ft
16 10 Aluminium Double 12ft
19 10 Aluminium Triple 10ft
22 10 Aluminium Triple 12ft
22 10 Combination Ladder 3 PC 2.5m
22 10 Combination Ladder 3 PC 3m
Lifting Equipment28 1,2 Gas powered Genie lift 3.8m (max lift 160Kg)
31 1,2 Gas powered Genie lift 5.6m (max lift 160Kg)
18 1,2 Hire CO2 bottle for Genie lift (VB)
18 1,2 Gas Sale CO2 for Genie lift
Kg PPE DescriptionStaging & Trestles19 10 Aluminium 10ft
22 10 Aluminium 12ft
26 10 Aluminium Superboard 3.6m (12ft)
40 10 Aluminium Superboard 4.8m (15ft)
5 10 Band Stands
8 1,2,K1 Accrow Props No1 closed 1.8 mtr open 3.0 mtr
8 1,2,K1 Accrow Props No2 closed 2.0 mtr open 3.3 mtr
Towers ( BOSS Aluminium)Single Width (850mm) x 1.8m Length
105 10 1.7m Platform Ladder Span Tower Single Width
105 10 2.2m Platform Ladder Span Tower Single Width
134 10 2.7m Platform Ladder Span Tower Single Width
140 10 3.2m Platform Ladder Span Tower Single Width
145 10 3.7m Platform Ladder Span Tower Single Width
151 10 4.2m Platform Ladder Span Tower Single Width
189 10 4.7m Platform Ladder Span Tower Single Width
195 10 5.2m Platform Ladder Span Tower Single Width
200 10 5.7m Platform Ladder Span Tower Single Width
206 10 6.2m Platform Ladder Span Tower Single Width
228 10 6.7m Platform Ladder Span Tower Single Width
233 10 7.2m Platform Ladder Span Tower Single Width
239 10 7.7m Platform Ladder Span Tower Single Width
245 10 8.2m Platform Ladder Span Tower Single Width
Double Width (1450mm) x 1.8m Length
105 10 1.7m Platform Ladder Span Tower Single Width
127 10 2.2m Platform Ladder Span Tower Double Width
157 10 2.7m Platform Ladder Span Tower Double Width
163 10 3.2m Platform Ladder Span Tower Double Width
170 10 3.7m Platform Ladder Span Tower Double Width
176 10 4.2m Platform Ladder Span Tower Double Width
207 10 4.7m Platform Ladder Span Tower Double Width
214 10 5.2m Platform Ladder Span Tower Double Width
220 10 5.7m Platform Ladder Span Tower Double Width
227 10 6.2m Platform Ladder Span Tower Double Width
234 10 6.7m Platform Ladder Span Tower Double Width
255 10 7.2m Platform Ladder Span Tower Double Width
262 10 7.7m Platform Ladder Span Tower Double Width
268 10 8.2m Platform Ladder Span Tower Double Width
35 10 1.0m Platform Podium
35 10 1.2m Platform Podium
35 10 1.6m Platform Podium
45 10 Room-Mate platform 1.8m
37 10 Tele-Graph Steps 4-6 tread
Scissor Lift
Boom Lift
Kg PPE DescriptionPipe Grooving17 1,2,4,9-K1 Victaulic portable roll groover VE226
84 1,2,4,9-K1 Victaulic portable roll groover Field Type VE272SFS
154 1,2,4,9-K1 Victaulic portable roll groover Field Type VE270FSD
154 1,2,4,9-K1 Victaulic roll groover Field Type VE416 FSD Complete with drive.
80 1,2,4,9-K1 Victaulic Groove and go Field fabrication VE106
634 1,2,4,9-K1 Victaulic Power Drive VPD752
Victaulic VCT200 Dry cut (Blades sold seperately)
Pipe Threading85 1,2,4,9-K1 Ridgid 300 Threader Kit 1/2 - 2" BSPT c/w power drive tripod/oilbath and gun
/ 1/2-3/4" die set / 1-2" die set carriage /QO diehead and pipestand
52 1,2,4,9-K1 Ridgid 300 Power Drive Unit 110v c/w footswitch/tripod
2 1,2,4,9-K1 Ridgid 300 Nipple chuck Kit 1/2 -2"
9 1,2,4,9-K1 Ridgid Pipestand 46 Upright extends 23-33" capacity 6"
9 1,2,4,9-K1 Ridgid Pipestand 92 Upright extend 32-41" capacity 6"
2 2, Plastic Drip Tray
41 1,2,4,9-K1 Ridgid 141 Geared Receder 21/2 - 4" BSPT
71 1,2,4,9-K1 Ridgid 161 Geared Receder 4 - 6" BSPT
220 1,2,4,9-K1 Ridgid 1224 4" Threader
24 1,2,4,9-K1 Ridgid 114 Hand Held 110v Threader 1/2 - 1" BSPT
24 1,2,4,9-K1 Ridgid 690 Hand Held 110v Threader 1/2 - 2" BSPT
42 1,2,4,9-K1 Ridgid 700 Hand Held 110v Threader 1/2 - 2" BSPT
78 1,2,4,9-K3 Rothenberger Compact Threader 50R 110v 1/2-2"
175 1,2,4,9-K4 Rothenberger Threader Supertronic 4SE 110v 1/2-4"
117 1,2,4,9-K4 Rothenberger Threader Supertronic 1/2-3"
30 1,2,4,9-K5 Rothenberger Hand Held Portable Threader S-2000 110v 1/2-2"
25 1,2,4,9-K5 Rothenberger Hand Held Portable Threader S-1000 110v 1/2 - 1 ¼"
195 1,2,4,9-K1 Piset 6SB Threader 2 1/2 - 6" BSPT
8 2 Manual Rachet Pipe Threader 1 ¼ BSP Banjo
8 2 Manual Rachet Pipe Threader 2" BSP Banjo
4 2 Manual Rachet Pipe Threader Conduit 20-25mm
4 2 Manual Rachet Pipe Threader Conduit 32mm
Pumps22 2 Sump Pump 2" 110v c/w 10m 2" layflat hose
4 2" layflat hose
22 2 Puddle Pump
6 2 Manual Test pump up to 50 bar
20 2 Electric Test pump up to 25 bar 110v
12 1,2 Kamco Flushing Pump 110v
20 1,2 Rems Solar Push 110v
Steps8 10 Fibreglass GRP 6 Tread
12 10 Fibreglass GRP 8 Tread
16 10 Fibreglass GRP 10 Tread
The above and previous pages are a snap shot of our Plant Hire fleet, additional products and ranges are being added regularly, please contact our Plant Hire team for any other opportunities and pricing.
Sales 0208 216 1900 Fax 0845 071 [email protected] www.tglynes.co.uk
32 33
ConversionsTables & Dimensions
To covert to metric, multiply the factor shown. To convert from metric divide by the factor shown.
LENGTH miles : kilometres 1.6093 yards : metres 0.9144 feet : metres 0.3048 inches : millimetres 25.4 inches : centimetres 2.54
AREA square miles : square kilometres 2.59 square miles : hectares 258.999 acres : square metres 4046.86 acres : hectares 0.4047 square yards : square metres 0.8361 square feet : square metres 0.0929 square feet : square centimetres 929.03 square inches : square millimetres 645.16 square inches : square centimetres 6.4516
VOLUME cubic yard : cubic metres 0.7646 cubic feet : cubic metres 0.0283 cubic inches : cubic centimetres 16.3871
CAPACITY gallons : litres 4.546 US gallons : litres 3.785 quarts : litres 1.137 pints : litres 0.568 gills : litres 0.142
VELOCITY miles per hour : kilometres per hour 1.6093 feet per second : metres per second 0.3048 feet per minute : metres per second 0.0051
WEIGHT tons : kilograms 1016.05 tons : tonnes 1.0160 hundredweights : kilograms 50.8023 quarters : kilograms 12.7006 stones : kilograms 6.3503 pounds : kilograms 0.4536 ounces : grams 28.3495
FUEL CONSUMPTION gallon per mile : litres per kilometre 2.825 miles per gallon : kilometres per litre 0.354
TEMPERATURE CONVERSION ˚F/˚CF Fahrenheit ˚F = 9/5 ˚C +32 Celsius ˚C = 5/9 ˚F -32
CONVERSIONS MANUFACTURER LINKSFlange Tables
BS 10 Table E
Nominal bore inches
Flange dia. Inches
Length & dia. of bolts
mmNumber of bolts
P.C.D. inches
Weights (slip-on)
KG’s
1/2 3 3/4 40 x M12 4 2 5/8 0.34
3/4 4 40 x M12 4 2 7/8 0.45
1 4 40 x M12 4 3 ¼ 0.57
1 ¼ 4 3/4 45 x M12 4 7/16 0.79
1 1/2 5 ¼ 45 x M12 4 3 7/8 1.02
2 6 50 x M12 4 4 ¼ 1.36
2 1/2 6 1/2 50 x M12 4 5 1.70
3 7 ¼ 50 x M12 4 5 2.27
4 8 1/2 55 x M12 8 7 3.18
5 10 55 x M12 8 8 ¼ 4.76
6 11 65 x M12 8 9 ¼ 7.48
8 13 ¼ 65 x M12 8 11 9.98
10 16 75 x M12 12 14 15.42
12 18 80 x M12 12 16 20.41
Welding Fitting Dimensions
BS1965
Nominal Bore Outside Diameter Wall Thickness
inches mm inches mm inches mm weight1/2 15 0.840 21.3 .104 2.6 medium
3/4 20 1.062 26.9 .104 2.6 medium
1 25 1.315 33.4.128 3.2 medium
.160 4.0 heavy
1 ¼ 32 1.688 42.4.180 3.2 medium
.160 4 heavy
1 1/2 40 1.906 48.3.128 3.2 medium
.160 4 heavy
2 50 2.375 60.3.144 3.6 medium
.176 4.5 heavy
2 1/2 65 2.875 73.0.144 3.6 medium
.176 4.5 heavy
3 80 3.5 88.9.169 4 medium
.192 5 heavy
3 1/2 90 4.0 101.6.176 4.5 medium
.212 5.4 heavy
4 100 4.5 114.3.176 4.5 medium
.212 5.4 heavy
5 125 5.563 141.3.192 5 medium
.212 5.4 heavy
6(6 1/2 o.d.)
150 6.625 168.3.192 5 medium
.212 5.4 heavy
6(6 5/8 o.d.) 150 6.625 168.3
.212 5.4 medium
.250 6.3 heavy
.281 7.1 other
8 200 8.625 219.1
.212 5.4 medium
.250 6.3 heavy
.312 8 other
10 250 10.75 273
.250 6.3 other
.312 8 heavy
.375 9.5 other
12 300 12.75 323.9
.250 6.3 other
.281 7.1 other
.312 8 heavy
14 350 14 355.6 .375 9.5 heavy
16 400 16 406.4 .375 9.5 heavy
Length • Imperial/Metric Metric/Imperial
inches mm mm inches1 25.4 10 0.39
2 50.8 20 0.78
3 76.2 30 1.18
4 101.6 40 1.57
5 127 50 1.96
6 152.4 60 2.36
7 177.8 70 2.75
8 203.2 80 3.14
9 228.6 90 3.54
10 254 100 3.93
20 508 200 7.8
30 762 300 11.8
40 1016 400 15.7
50 1270 500 19.6
60 1524 600 23.6
70 1778 700 27.5
80 2032 800 31.4
90 2286 900 35.4
100 2540 1000 39.3
EN 1092 PN6
Nominal bore inches
Flange dia. Inches
Length & dia. of bolts
mmNumber of bolts
P.C.D. inches
Weights (slip-on)
KG’s
15 80 M10 x 40 4 55 0.39
20 90 M10 x 45 4 65 0.59
25 100 M12 x 50 4 75 0.75
32 120 M12 x 50 4 90 1.05
40 130 M12 x 50 4 100 1.18
50 140 M12 x 50 4 110 1.34
65 160 M12 x 50 4 130 1.67
80 190 M16 x 60 4 150 2.71
100 210 M16 x 60 8 170 3.24
125 240 M16 x 60 8 200 4.49
150 265 M16 x 60 8 225 5.15
200 320 M16 x 65 8 280 7.78
250 375 M16 x 70 12 335 10.80
300 440 M20 x 70 12 395 14.00
EN 1092 PN 16
Nominal bore inches
Flange dia.
Inches
Length & dia. of bolts
mmNumber of bolts
P.C.D. inches
Weights (slip-on)
KG’s
15 95 M12 x 45 4 65 0.65
20 105 M12 x 50 4 75 0.95
25 115 M12 x 50 4 85 1.14
32 140 M16 x 60 4 100 14.69
40 150 M16 x 60 4 110 1.86
50 165 M16 x 60 4 125 2.53
65 185 M16 x 60 4 145 3.06
80 200 M16 x 65 4 160 3.70
100 220 M16 x 70 8 180 4.62
125 250 M16 x 70 8 210 6.30
150 285 M20 x 70 8 240 7.75
200 340 M20 x 90 8 296 11.30
250 405 M20 x 90 12 355 15.60
300 460 M20 x 90 12 410 22.00
Altecnic Ltd www.altecnic.co.uk
Aspen Pumps Ltd www.aspenpumps.com
Big Foot Systems Ltd www.bigfootsupport.com
Conex Universal Ltd www.conexbanninger.com
Crane Ltd www.cranefs.com
Flamco Ltd www.flamcogroup.com
George Fischer Sales Ltd www.georgfischer.com
Grinnell www.grinnell.com
Hattersley a Division of Crane Ltd www.hattersley.com
John Guest Speedfit Ltd www.johnguest.com
Keraflo Ltd www.keraflo.co.uk
Lawton Tube Co. Limited www.lawtontubes.co.uk
McAlpine & Co Ltd www.mcalpineplumbing.com
Monument Tools Ltd www.monumenttools.com
Pegler Yorkshire Group Limited www.pegleryorkshire.co.uk
Polypipe Terrain Ltd www.polypipe.com
Reliance Water Controls Ltd www.rwc.co.uk
Rems UK Ltd www.rems.de
Rothenberger(UK) Ltd www.rothenberger.co.uk/en
S.Brannan & Sons Ltd www.brannan.co.uk
Saniflo www.saniflo.co.uk
Spirax-Sarco Ltd www.spiraxsarco.com
Stourflex www.stourflex.co.uk
Talon Manufacturing Ltd www.talon.co.uk
Tracpipe www.omegaflex.co.uk
Uponor Ltd www.uponor.co.uk
Vent-Axia Group Ltd www.vent-axia.com
Wavin Ltd www.wavin.co.uk
Yorkshire Copper Tube www.yorkshirecopper.com
Sales 0208 216 1900 Fax 0845 071 7071 Sales 0208 216 1900 Fax 0845 071 [email protected] www.tglynes.co.uk [email protected] www.tglynes.co.uk
34 35
Where to find usNotes
MAP TO BE DRAWNBRIMSDOWN
PONDERS END
EDMONTON
TOTTENHAM
ENFIELD
SOUTHGATE
FINCHLEY
A406
A1
A41
A406
A12
A10
A10
55
A1055
NORTH CIRCULAR ROAD
WOOD GREEN
MO
LLIS
ON
AV
E
A10
A40
6
A1(M)
M25M25
M11
M1
GT
CAM
BRID
GE
AV
E
BRIMSDOWNINDUSTRIAL
ESTATE
BRIMSDOWNSTATION
ENFIELDLOCK
KIN
G G
EORG
E’S
RESE
RVO
IRA10
A1055
MO
LLIS
ON
AV
E
BRANCROFT WAY
TGLynes Limited
115 Brancroft Way, Brimsdown, Enfield, EN3 7QE
Opening Hours
Trade Counter Monday ~ Friday 07:00 ~ 17:00 Saturday 08:00 ~ 12:00
Sales Office Monday ~ Friday 08:00 ~ 17:00*Subject to public & company holidays
115 Brancroft Way, Brimsdown, Enfield, EN3 7QE
Sales 0208 216 1900 Fax 0845 071 7071
TGLynes Product Guide 2017
[email protected] www.tglynes.co.uk
36
Distributors of materials for Mechanical Services, Heating, Plumbing and Air Movement Industry
Distribution Centre and Trade Counter 115 Brancroft Way, Brimsdown, Enfield, EN3 7QE
t: 0208 216 1900 f: 0845 071 7071 e: [email protected]
www.tglynes.co.uk
Trade Counter opening times Monday to Friday 07:00 - 17:00 Saturday 08:00 - 12:00
• 2,000 sq ft • Ease of parking • Product display • Ample loading area
Check where we are using the map on the inside back cover is
sue
date
Feb
201
7